Smeg SI850P-5 manuale d’uso

Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE _______________ 29 2. INSTALLATION _________________________________________ 31 3. DESCRIPTION OF CONTRO LS ____________________________ 35 4. USE OF THE OVEN ______________________________________ 41 5. AVAILABLE ACCESSORIES _______________________________ 42 6. COOKING HINTS _______________________[...]

Introduction 1. INSTRUCTIONS FOR SAFE AN D PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN A N ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE OVEN. WE ADVISE CAREFUL READING OF THIS MANUAL AN D ALL THE INSTRUCTIONS THEREIN BEFORE USING THE OVEN. INSTALLATION MUST BE CARRIED OUT BY Q[...]

Introduction NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN: THEY COULD BE ACCIDENTALLY CATCH LIGH T AND CAUSE FIRES. DURING USE THE APPLIANCE BECOMES VERY HOT. TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN. THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME IS POSITIONED VISIBLY ON THE OVEN DOOR FRAME. THE PLATE MUST N[...]

Instructions for the installer 2. INST ALLA TION 2.1 Electrical connection Check that the mains vo ltage and power cable ratings are as per th e information provided on the label attach ed to the oven door frame. This label must never be removed. It is obligatory for the electrical system to be e arthed according to the methods required by safety r[...]

Instructions for the installer 32 For operation on 220-240V ∼ : use an H05RR-F / H05RN-F type three-core cabl e (3 x 4 m 2 ). Fo r o p er a ti o n o n 380-415V2 N ∼ : use an H05RR-F / H05RN-F type four-core cable (4 x 2.5 mm 2 ). Fo r o p er a ti o n o n 380-415V3N ∼ : use an H05RRF / H05RN-F ty p e f i ve - c or e ca b l e (5 x 1.5 mm 2 ). T[...]

Instructions for the installer 2.2 Installing the oven The oven is designed for installation into any piece of fur niture as long as it is heat-resistant. Procee d according to the dimens ions shown in Figures 1 , 2 and 3 . For installing under a work top, follow the dim ensions given in Figure 1 - 3 . For installing under a w ork top beneath a hob[...]

Instructions for the installer 34 Never use the oven door to lever the oven into place when fitting. Avoid exerting too much pres sure on the oven door when open. 2.3 Connecting the hob to the oven Once installed, the hob must be connec ted to the oven. Install the ove n allowing enough room for the follo wing operations to take pla ce. • Connect[...]

Instructions for the user 3. DESCRIPT ION OF CONTROLS 3.1 Front control panel All the oven controls are grou ped together o n the front panel. STATIC MODEL 5- FUNCTION MODEL 6- FUNCTION MODEL 8- FUNCTION MODEL 6-FUNCTIONS MODEL + HOB CONTROLS 35[...]

Instructions for the user 36 FUNCTION CONTROL KNOB (static oven) Cooking temperature is sele cted by turning the knob clockwise to the desired setting, betwee n 50 ° and 250 °C. This knob allows selectio n of either the bottom( ) or top (grill) ( ) heating element. A further symbol at end of knob rotation permits to turn on the spit motor and the[...]

Instructions for the user THERMOSTAT KNOB (multifunction oven) Cooking temperature is se lected by turning the knob clockwise to the d esired setting, between 50 ° and 250 °C. HOB CONTROL KNOB Used to control the temperatur e on the hob. Rotate clockwise to set to desired value ( 2 to 12 ). HOB CONTROL KNOB WITH DUAL ZONES Used to select heating [...]

Instructions for the user 38 3.2 Model with clock and minute minder 3.2.1 Adjusting the clock To set the correct time push or p ull (according to the models) and turn clockwise the correspondin g control knob “ A ”. 3.2.2 Minute minder To set the minute minder turn clockwise or anti- clockwise the corresponding control knob “ A ”, setting t[...]

Instructions for the user 3.3 Clock + timer with end of cooking Allows selection of manual cookin g or to set timer and cooking time. Knob A must always be turned CLOCKWISE . Select function and cooking temperature before setting cooki ng time. 3.3.1 Adjusting the clock To set the correct time, PULL OUT knob A and turn it clockwise. 3.3.2 Manual co[...]

Instructions for the user 40 3.4 Analog Programmer 3.4.1 Regolazione dell'ora To set the correct time, pull out the knob A and turn it clockwise. Before setting programmer, select desired cook ing mode and temperature. 3.4.2 Timed cooking Select the function and temperature re quired before setting the cooki ng duration. Now pull the k nob A o[...]

Instructions for the user 4. USE OF THE O VEN Make sure that you have either tu rned the minute min der knob to the symbol or set a cooki ng time. If the timer knob is on 0, no heating elements will come on. 4.1 Warnings and general advice Before using the oven for the first time, pre-heat it to maximum temperature ( 250 °C) l ong enough to burn o[...]

Instructions for the user 42 5. A V AILABLE A CCESSORIES The oven features 4 support positions for shelves and pans of different height. Some models do not feature all accessories . Chrome shelf: useful for holding cooking vessels. Grill mesh: for placing above grill pa n to allow juices to drip into pan below . Roasting/Grill pan: to be used for r[...]

Instructions for the user 6. COOKING HINTS In fan-assisted mode preheating s hould be carried out at 30/40°C above the cooking temperature. This consi derably shortens cooking times and reduces power consumption, as well as giving better cooking results. Keep the oven door closed during cooki ng 6.1 Traditional cooking (multifunction models) FUNCT[...]

Instructions for the user 44 Multiple cooking is possi ble as long as the cooking temperature of the different foods is the same. 6.3 Grill cooking FUNCTION SWITCH THERMOSTAT SWITCH . Permits rapid browning of foods. You are advised to place t he pan in th e highest position. When cook ing small item s for a short time th e pan should be in the hig[...]

Instructions for the user 6.5 De licate cooking (in some models only) FUNCTION SWITCH THERMOSTAT SWITCH 50 ÷ 250°C Ideal for pastries and cakes with a liquid s urface and little sugar a nd moist desserts in moulds. Excellent result s can also be achieved in completing cooking at the b ase and with dishes requiri ng heat in the lower area in parti[...]

Instructions for the user 46 6.7 Spit roasting (models with static oven) THERMOSTAT SWITCH Prepare the food on the spit rod and block fork screws A . Insert the frame B in the third level from the bottom. Remove handle D and position the spit rod with the handle hol der E in the guide on frame B . Completely fit frame B until the tip of the spit ro[...]

Instructions for the user 6.8 Recommended cooking table Cooking times, especially m eat, vary according to the thickness and quality of the food and to consumer taste. TRADITIONAL COOKING SHELF POSITION ( 1 IS LOWEST) TEMPERATURE (°C) TIME IN MINUTES (*) FIRST COURSES LASAGNE OVEN-BAKED PASTA 2 - 3 2 - 3 210 - 230 210 - 230 30 40 MEAT ROAST VEAL R[...]

Instructions for the user 48 FAN COOKING SHELF POSITION ( 1 IS LOWEST) TEMPERATURE (°C) TIME IN MINUTES FIRST COURSES LASAGNE OVEN-BAKED PASTA CREOLE RICE 2 2 2 190 - 210 190 - 210 190 - 220 20 - 25 25 - 30 20 - 25 MEAT ROAST VEAL ROAST PORK ROASTED BEEF FILLET OF BEEF ROAST LAMB ROAST BEEF ROAST CHICKEN ROAST DUCK ROAST TURKEY ROAST RABBIT ROAST [...]

Instructions for the user 7. CLEANING AND MAINTENANCE Before carrying out any maintenan ce switch off the power supply to the machine. 7.1 Cleaning stainless steel To keep stainless steel in good cond ition it should be cleaned regularl y after use. Let it cool first. 7.1.1 Ordinary Daily Cleaning To clean and preserve the stainl ess steel surfaces[...]

Instructions for the user 50 • The oven should be oper ated at t he maximum temperature for abou t 15/20 minutes after using specific pr oducts, to eliminate the residues deposited inside the oven. • For easier cleaning, the door can be rem oved (see P. 8.2) 7.3 Self-cleaning liners (only on some models) The oven is equipped with continu ous se[...]

Instructions for the user 8. ADDITIONAL MAINTENANCE The oven may require additionaly ma inte nance or replac ement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations. Before any intervention, di sconnect the power supply. 8.1 Replacement of light bulb Rem[...]

Instructions for the user 52 8.2 Removing Raise leve rs on each h inge A to l ock the hinges before atte mpting to remove the door. Hold the door on bo th sides with both hands near hinges B . Lift up the door forming an angle of about 45° and remove. To refit, sli de the hinges A into slots in ov en frame. Locate t he grooves (figu re C) over fra[...]