Snapper Broadmoor 2600 manuale d’uso

Parts Manual Rev. 04/2004 Broadmoor / 1600 / 2600 Series Lawn Tractors & Mower Decks TP 400-2529-02-BM-SMA Mf g . No. Descri p tion 1 6 HP Tractors 1694009 Broadmoor, 16HP Hydro (Kohler) 1694010 Broadmoor, 16HP Hydro 1694018 1606, 16HP Hydro (Kohler) 1694019 1616, 16HP Hydro 1694027 2606, 16HP Hydro (Kohler) 1694028 2616, 16HP, Hydro 1694179 Br[...]

[...]

Table Of Content s Torque Specification Chart ...... ............................ ......................... .......... Inside Back Cover PRODUCT COMPONENTS PAGES Frame & Front Axle Gr oup ...................................................................................................... ............................. 4 Steering Group - Manual[...]

Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torq ue to 150 ft. lbs. (202 Nm) Torque to 22-4 0 ft. lbs. (30-5 4 Nm) Torque to 13 f t. lbs. Servic e Ki t 168 6985 Torque to 50-5 7 ft. lbs. (48-56 Nm) Torq ue to 22-4 0 ft. lbs. (30-5 4 Nm) Torq ue to 55-6 0 ft. lbs. (74-8 1 Nm) 12 18[...]

PART NO. DESCRIP TION REF NO QTY. Frame & Front Axle Group Footnote s 1 1930645 7 NUT, Hex Flange Lock, 3/8-16 2 1960035 2 WASHER 3 960646 1 NUT, Hex Flange, 5/8-11 4 1722212 1 PLATE, Axle 5 1724081 1 TOWER & SUPPORT ASSEMBLY 6 1923683 4 CAPSCREW, Hex Head Taptite, 3/8-16 x 3/4 7 1723528 1 SUPPORT 8 1664847 4 CAPSCREW, Hex Head Taptite, 5/1[...]

Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torq ue to 150 ft. lbs. (202 Nm) Torque to 22-4 0 ft. lbs. (30-5 4 Nm) Torque to 13 f t. lbs. Servic e Ki t 168 6985 Torque to 50-5 7 ft. lbs. (48-56 Nm) Torq ue to 22-4 0 ft. lbs. (30-5 4 Nm) Torq ue to 55-6 0 ft. lbs. (74-8 1 Nm) 12 18[...]

PART NO. DESCRIP TION REF NO QTY. Frame & Front Axle Group Footnote s 42 1919394 1 WASHER 43 932577 1 RETAINING RING The above parts group applies to the following Mfg. Nos.: 2004 7 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694018 - 1606 1694019 - 1616 1694027 - 2606 1694028 - 2616 1694281 - 2626 1694009 - Broadmoor 1694[...]

Steering Group - Manual Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 36-44 ft. lbs. or 48-60 Nm Steering cap snaps over steering wheel. Use washers as required. Torque to 36-44 ft. lbs. or 48-60 Nm Bearin g mounts be low frame. Slide pinion into gear before tightening nuts. 18 21 14 7 11 10 [...]

PART NO. DESCRIP TION REF NO QTY. Steering Group - Manual Steering Footnote s 1 1722318 1 STEERING WHEEL, Straight, Shaft 2 1722319 1 CAP, Steering Wheel, SMI Logo 2 1725024 1 CAP, Steering Wheel, Plain 3 1960540 1 PIN, Spring, 5/16 x 2-1/2 4 1722749 1 COVER, Rubber, Upper Steering Shaft 5 1960114 5 WASHER, 3/4 6 176440 2 BUSHING, 15/32 x 7/8 x 7/8[...]

Engine & Electric Clutch Group - 16HP & 18HP B riggs & Stratton, Vanguard NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Manufactur er Ga sket & Ha rdw are, Torque to 18 ft. l bs. (25 N m) Tie clutch wir e to keep away from pu lley. Torque to 45-50 ft . lbs. (61-68 Nm) Torque to 19-23 ft .[...]

PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP & 18HP B riggs & Stratton, Vanguard Footnote s 1 1723165 1 HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings 2 * 1 ENGINE, 16HP Briggs & Stratton Vanguard Twin, Mo del 303777, Type 1114-E1 2 * 1 ENGINE, 18HP Briggs & Stratton Vanguard Twin, Mo del 356777, [...]

Engine & Electric Clutch Group - 16HP Briggs & Str atton, INTEK NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Manufactur er Gas k et & H ar dwa r e, Torque to 18 ft. l bs. (25 N m) Tie clutch wir e to keep away from pu lley. Torque to 45-50 ft . lbs. (61-68 Nm) Torque to 19-23 ft . lbs. (26-3[...]

PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP Briggs & Str atton, INTEK Footnote s 1 1723165 1 HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings 2 * 1 ENGINE, 16HP Briggs & Stratton INTEK Twin, Model 406777, Type 0162 3 1719847 1 SEAL, Circle 4 1722388 1 BULKHEAD 5 1925003 2 CAPSCREW, Hex Washer Head Taptite,[...]

Engine & Electric Clutch Group - 16HP Honda NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 18 ft. l bs. (25 Nm) Tie clutc h wire to keep away from pulley. Torque to 45-5 0 ft . lbs . (61-68 Nm) Torque to 19-23 ft. lbs. (26-31 Nm) Note: Orientatio n of All Keys Position pull ey chamf er side up. To [...]

PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP Honda Footnote s 1 934683 2 CLIP, Wire 1/8 2 960656 2 CAPSCREW, Hex Head, M06-1 x 12MM 3 1723526 1 SHIELD, Manifold, RH 4 1724197 1 SEAL, Foam 5 * 1 ENGINE, 16HP HONDA, Twin, Model GXV350, Type PX-A1 6 1960611 2 CAPSCREW, Hex Head, Whiz Flangelock, 1/4-20 x 1, Black 7 17223[...]

Engine & Electric Clutch Group - 16HP Kohler NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine M anufact urer Gaske t & Ha rdwar e, Torqu e to 18 ft . lbs . (25 Nm) Tie clutch wire to keep away from pulley. Torque to 45-50 ft. lbs. (61 - 6 8 Nm) Torque to 12-16 ft. lbs. (26 - 31 Nm) Note: Orien tatio[...]

PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP Kohler Footnote s 1 1723165 1 HOSE, Oil Drain, 10 1/2 Lon g, 3/8-18 Fittings 2 * 1 ENGINE, 16HP Kohler, Single, Model CV460S, Type PA-26507 3 1722950 1 SEAL, Circle 4 1722388 1 BULKHEAD 5 1925003 2 CAPSCREW, Hex Washer Head Taptite, 1/2-20 x 1/2, Black 6 1721949 1 CONTROL, [...]

Transmission Group - Tuff Torq K-57 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Spring to be compressed to 2-1/2 inches with brak e locked . Torqu e nut to 28 - 33 ft. lbs. (35 - 44 N m) 9 4 6 1 7 3 5 2 8 24 16 28 31 25 27 26 29 19 8 19 17 16 37 34 14 15 10 35 11 12 12 36 18 19 23 21 22 30 32 33 20 13 985886 [...]

PART NO. DESCRIP TION REF NO QTY. Transmission Group - Tuff Torq K-57 Footnote s 1 1960676 2 SCREW, Pan Head Torx Taptite, 1/4-20 x 1-1/4, Black 2 1722345 1 PAD, Footrest, LH, without Differential Lock 3 1722173 1 PAD, Footrest, RH 4 1960636 1 NUT, Hex KEPS, 5/16-18, Black 5 1704351 15 FASTENER, Panel 6 1960637 6 NUT, Hex KEPS, 3/8-16, Black 7 1931[...]

Transmission Group - Tuff Torq K-62 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Spring to be compress ed to 2-1/2 inches w i th brake locked. Torque nut to 19 - 21 ft. lbs. (26 - 28 Nm) Torque nut to 28 - 33 ft. lbs. (35 - 44 Nm) 9 4 6 1 7 3 5 2 8 20 27 24 29 21 28 23 22 25 16 8 16 14 13 33 30 12 10 31 11 32 [...]

PART NO. DESCRIP TION REF NO QTY. Transmission Group - Tuff Torq K-62 Footnote s 1 1960678 2 CAPSCREW, Pan Head Trox Taptite, 1/4-20 x 1-1/4, Black 2 1722345 1 PAD, Footrest, LH, W/O Differential Lock 3 1722173 1 PAD, Footrest, RH 4 1960636 1 NUT, Hex KEPS, 5/16-18, Black 5 1704351 15 FASTENER, Panel 6 1960637 6 NUT, Hex KEPS, 3/8-16, Black 7 19313[...]

Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SEAL SIDE; O UTER THI CK BEARIN G RACE SHOULD C ONTACT PISTO NS. THIC KE R PLATE 11 18 15 19 12 14 16 13 24 21 33 23 20 22 27 35 37 38 36 32 34 31 47 51 45 53 45 52 46 56 48 55 49 59 29 30 57 28 62 60 61 64 70 67 63 72 [...]

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 1 1724316 1 RING, SNAP 2 1724315 1 LOCKWASHER 3 1724314 1 FAN 4 1724312 2 COLLAR, SPLINE 5 1718076 3 RING E15 6 1724941 1 SHAFT, PUMP 7 1724283 1 SEAL TC 8 1708650 1 RING 35 9 1708673 1 BEARING 10 1724282 1 SEALING CAP 11 1724279 2 MAGNET, K50 12 1724280 1 H[...]

Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SEAL SIDE; O UTER THI CK BEARIN G RACE SHOULD C ONTACT PISTO NS. THIC KE R PLATE 11 18 15 19 12 14 16 13 24 21 33 23 20 22 27 35 37 38 36 32 34 31 47 51 45 53 45 52 46 56 48 55 49 59 29 30 57 28 62 60 61 64 70 67 63 72 [...]

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 43 1724954 1 FILTER 44 1724947 1 SHAFT, REDUCTION 45 1724948 2 WASHER, 12 x 32 x 3.2 46 1724950 1 PINION, FINAL 47 1724946 2 COLLAR, PINION 48 1724949 1 GEAR, REDUCTION 49 1724303 1 SHAFT, AXLE LH 50 1718110 2 BUSHING 19 x 21 51 1718112 2 WASHER, THRUST 52 1[...]

Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SEAL SIDE; O UTER THI CK BEARIN G RACE SHOULD C ONTACT PISTO NS. THIC KE R PLATE 11 18 15 19 12 14 16 13 24 21 33 23 20 22 27 35 37 38 36 32 34 31 47 51 45 53 45 52 46 56 48 55 49 59 29 30 57 28 62 60 61 64 70 67 63 72 [...]

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 85 1708691 2 PACKING 86 1724281 1 SHAFT, BYPASS The above parts group applies to the following Mfg. Nos.: 2004 27 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694018 - 1606 1694027 - 2606 1694281 - 2626 1694009 - Broadmoor 1694277 - Broa[...]

Transmi ssion SERVICE PA RTS - Tuff Torq K-62K NOTE: Unless noted otherwise, use the standard hardware torque specification chart. THI CKE R PLATE THI CKE R PLATE 11 77 15 19 12 14 16 13 30 22 29 88 21 28 40 38 10 34 41 37 39 35 45 48 50 47 49 51 46 76 73 63 61 65 72 1 7 2 8 4 6 3 5 9 64 31 18 27 78 85 17 1 28 80 79 86 87 71 62 54 56 55 59 53 52 54[...]

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-62K Footnote s 1 1718100 2 PIN 6.0A x 4.0 2 1724705 1 PIN 3 1724706 1 LEVER, CONTROL 4 1718039 1 SHOCK ABSORBER 5 1724704 1 STAY 6 1707789 4 SCREW, TAPPING 7 1718076 1 RING E15 8 1708651 1 SEAL 9 1708650 1 RING 35 10 1708672 3 RING 15 11 1718083 1 BEARING 6202UC3 12 172474[...]

Transmi ssion SERVICE PA RTS - Tuff Torq K-62K NOTE: Unless noted otherwise, use the standard hardware torque specification chart. THI CKE R PLATE THI CKE R PLATE 11 77 15 19 12 14 16 13 30 22 29 88 21 28 40 38 10 34 41 37 39 35 45 48 50 47 49 51 46 76 73 63 61 65 72 1 7 2 8 4 6 3 5 9 64 31 18 27 78 85 17 1 28 80 79 86 87 71 62 54 56 55 59 53 52 54[...]

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-62K Footnote s 43 1724752 1 GEAR, MOTOR 44 1724751 1 E, RING MOTOR 45 1724723 1 DISC, BRAKE 46 1724725 1 SHIM SET 47 1724724 1 SHOE, BRAKE 48 1724726 1 ACTUATOR, BRAKE 49 1724714 1 SHAFT, FINAL PINION 50 1724715 2 WASHER, 15 x 32 x 3.2 51 1724717 1 PINION, FINAL 52 1724753[...]

Transmi ssion SERVICE PA RTS - Tuff Torq K-62K NOTE: Unless noted otherwise, use the standard hardware torque specification chart. THI CKE R PLATE THI CKE R PLATE 11 77 15 19 12 14 16 13 30 22 29 88 21 28 40 38 10 34 41 37 39 35 45 48 50 47 49 51 46 76 73 63 61 65 72 1 7 2 8 4 6 3 5 9 64 31 18 27 78 85 17 1 28 80 79 86 87 71 62 54 56 55 59 53 52 54[...]

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-62K Footnote s 85 1724727 1 SHAFT, BRAKE HL #10 86 1724728 1 WASHER, 16 x 23 x 1.6 87 1708690 1 PACKING 88 1724722 1 SPRING, BRAKE 89 1724721 1 ARM, BRAKE The above parts group applies to the following Mfg. Nos.: 2004 33 © Copyright Simplicity Manufacturing, Inc. All Righ[...]

Lift Group - Manual Lift NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Ref. No. 1 6 Instal l int o lef t hand side of lower dash. 2 16 15 12 11 13 17 7 5 9 8 4 6 3 10 18 19 12 20 21 1 14 2 12 985893 The above parts group applies to the following Mfg. Nos.: 2004 34 © Copyright Simplicity Manufacturing, Inc. [...]

PART NO. DESCRIP TION REF NO QTY. Lift Group - Manual Lift Footnote s 1 1722285 1 COVER, Dash 2 1924940 2 WASHER 3 1721789 1 ROD 4 1722024 1 ROD, Lift 5 1722302 1 GRIP, Black Vinyl 6 1923341 2 CAPSCREW, Hex Head, 1/4-20 x 3/4 7 1722108 1 POD, RH 8 1722313 1 COVER, with Lift Icon, for Models without Cruise Control 9 1722284 1 QUADRANT 10 1920397 2 N[...]

Lift Group - Manual Lift NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Install into left ha nd side of lower da sh. 4 5 3 6 1 9 2 8 10 13 14 11 18 17 16 5 12 5 7 15 986412 The above parts group applies to the following Mfg. Nos.: 2004 36 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694468 -[...]

PART NO. DESCRIP TION REF NO QTY. Lift Group - Manual Lift Footnote s 1 1722302 1 GRIP, Black Vinyl 2 1722024 1 ROD, Lift Lever with Flats 3 1930645 1 NUT, Hex Flange Lock, 3/8-16 4 1924940 1 WASHER 5 1722460 2 PIN, Quick 6 162085 1 SPRING, Compression 7 1723866 1 NUT, Push, 3/8 8 1923341 2 CAPSCREW, Hex Head, 1/4-20 x 3/4 9 1722284 1 QUADRANT 10 1[...]

Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 17 19 12 18 14 13 20 21 27 29 22 28 23 25 4 30 31 37 35 30 32 38 34 36 33 1 5 9 2 8 4 6 3 10 1 5 6 10 15 16 24 24 26 15 35 41 40 39 18 7 8 985882 The above parts group applies to the following Mfg. Nos.: 2004 38 © Copyright Simplicity Manufacturin[...]

PART NO. DESCRIP TION REF NO QTY. Controls Group Footnote s 1 1721353 1 ROD, Brake Lock 2 1721891 1 KNOB, Push On, Red Plastic "P" 3 1930591 1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 4 1919326 2 WASHER, 5/16, Black 5 1721476 1 ROD, Brake 6 1931353 2 CARRIAGE BOLT, 3/8-16 x 1 3/4 7 1663114 2 BUSHING, 5/8 x 3/4 x 3/4, Nylon 8 921133 1[...]

Cruise Control Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Control Ar m from tr ansmission group. Brake ar m at idle r pivot. Hol e "A" Hook into hole "A" of frame. Instal l rounded edge of washer toward lever & bracket ass embly. Lubricate both sides of slot with grease. Install[...]

PART NO. DESCRIP TION REF NO QTY. Cruise Control Group Footnote s 1 1723713 1 DECAL, Cruise & Lift 2 1960666 1 SCREW, Torque Head Plus Socket Head, 1/4-20 x 7/8 3 1722303 1 KNOB, Cruise 4 1920397 1 NUT, Hex Lock ESNA Light, 1/4-20 5 1722003 1 LEVER & BRACKET ASSEMBLY, Cruise 6 1960103 2 WASHER, 3/8, Black 7 1931333 1 CARRIAGE BOLT, 5/16-18 [...]

Electrical Group - Honda Engine NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Cru is e Sw itch (See Controls Group for Mounting Hardware) To Engine Sta rter Headlight Switch DASH MOUNTED HOOD MOUN TE D UNDER HOOD UNDER HOOD UNDER FRAME UNDER SEAT DECK Peda l Switch Sea t Switch (NC) To Electric Clutch To Charge[...]

PART NO. DESCRIP TION REF NO QTY. Electrical Group - Honda Engine Footnote s 1 1721810 1 HEADLIGHT ASSEMBLY, 4 Blub, (Incudes Ref. Nos. 2 & 3) 2 1677371 4 BULB, Headlight, 12.8V 3 1723451 4 SOCKET ASSEMBLY, Headlight, Sealed 4 1722669 1 HARNESS, Headlight 5 1722887 1 SWITCH, PTO Push/Pull Symbols 6 1925003 2 CAPSCREW, Hex Washer Head Taptite, 1[...]

Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Engine St arte r Headlight Switc h DASH MOUNTED HOOD MOU NTE D UNDER HOO D UNDER HOOD UNDER S EAT DECK Ped al Switch Sea t Switch (NC) To Elec tric Clutch To Charge Circuit To Fuel Shu t-O ff To Engine Magne to To Engine Ground To Oil Pres sure S[...]

PART NO. DESCRIP TION REF NO QTY. Electrical Group Footnote s 1 1721810 1 HEADLIGHT ASSEMBLY, 4 Bulb, (Includes Ref. Nos. 2 & 3) 2 1677371 4 BULB, Headlight, 12.8V 3 1723451 4 SOCKET ASSEMBLY, Headlight, Sealed 4 1722669 1 HARNESS, Headlight 5 1722887 1 SWITCH, PTO Push/Pull Symbols 6 1925003 2 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 1/2, B[...]

Hood, Grill & Dash Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Secure to bo ttom LH soleno id mounting ho le. 9 14 10 11 13 8 1 4 7 6 3 5 2 8 3 3 12 985896 The above parts group applies to the following Mfg. Nos.: 2004 46 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694018 - 160[...]

PART NO. DESCRIP TION REF NO QTY. Hood, Grill & Dash Group Footnote s 1 1721804 1 PANEL, RH Side, Orange 1 41721804 1 PANEL, RH Side, Red 2 1721801 1 HOOD, Orange 2 41721801 1 HOOD, Red 3 1960295 12 CAPSCREW, Hex Flange Whiz Lock, 1/4-20 x 5/8 4 1960392 1 SCREW, Pan Head Phillips, #10-24 x 1/2 5 1724082 1 DASHBOARD 6 1723123 1 ROD, Dash Support[...]

Seat & Seat Deck Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 14-19 in. lbs. (19 - 25.8 Nm) Torque to 25-30 in. lbs. (2.8 - 3.3 Nm ) 11 15 19 14 16 13 1 7 5 9 2 8 4 6 3 10 32 12 20 21 22 28 26 14 23 29 25 27 24 5 9 30 31 17 18 See Electrical Group 985908 The above parts group applies to the[...]

PART NO. DESCRIP TION REF NO QTY. Seat & Seat Deck Group Footnote s 1 1722129 1 BRACKET, 1-5/8 x 1-3/4 2 1722307 1 * SEAT, 18" Back, Optional 2 1722306 1 * SEAT, 15" Back, Standard 3 1722128 1 SUPPORT, Seat 4 172434 1 CLIP, Wire 5 1709256 2 WASHER, Spring, 5/16 x 1 -1/4, Black 6 1714263 2 SPRING, Compression 7 1919438 10 NUT, Hex Lock[...]

Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Fron t Wheels Rear Wh eels Use as requi red. Use as req uired . 11 4 4 9 2 10 3 5 8 12 10 7 1 14 15 16 17 6 13 8, 18 7, 20 19 6 W985913 The above parts group applies to the following Mfg. Nos.: 2004 50 © Copyright Simplicity Manufacturing, [...]

PART NO. DESCRIP TION REF NO QTY. Wheels & Tires Group Footnote s 1 1722065 2 WHEEL & TIRE ASSEMBLY, Front, (Includes Ref. Nos. 2, 3, 4, 5, & 6) 2 1722838 1 TIRE, 15 x 6, Super Turf 3 1664090 1 TUBE, Tire, Front, 4.10/3.50 4 1717056 2 BEARING, Ball 5 1722837 1 WHEEL, 4-1/2" x 6" 6 172353 4 VALVE STEM & CAP ASSEMBLY 7 19193[...]

Decals - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 7 1 2 2 3 4 5 6 8 9 11 10 4 12 B985913 The above parts group applies to the following Mfg. Nos.: 2004 52 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694018 - 1606 1694019 - 1616 1694027 - 2606 1694028 - 2616 1694281 -[...]

PART NO. DESCRIP TION REF NO QTY. Decals - Brand & Model Footnote s 1 1717692 1 DECAL, ICON Simplicity, Orange 2 1722551 3 DECAL, Simplicity, Silver & Blue w/Icon 3 1722776 1 DECAL, Broadmoor, Silver & Blue 4 1720454 1 DECAL, Touch Up Paint (Orange) 5 1722773 1 DECAL, Hood Stripe, RH, Simplicity, Blue & Silver 5 1722774 1 DECAL, Hoo[...]

Decals - Safe ty & Co mmon NOTE: Unless noted otherwise, use the standard hardware torque specification chart. DA NG E R OPERATING O N SLOPES CAN BE DANGER OUS SEE OPERATOR 'S MANUAL. IF YOU CAN NOT BACK -UP A HILL, DO NOT DRIV E ON IT. ROTATING BLADES CUT OFF ARMS AND LEGS STOP MOWER WHEN CHILDRE N ARE NEAR. NO RIDERS — THEY FALL OFF . [...]

PART NO. DESCRIP TION REF NO QTY. Decals - Safe ty & Co mmon Footnote s 1 1722806 1 DECAL, Ignition Switch Symbols, White/Black 2 1718025 1 DECAL, Automatic Control Traction 3 1722549 1 DECAL, 16HP 4 1722814 1 DECAL, Tunnel Cover, Danger Slopes/Blades 4 1723175 1 DECAL, Tunnel Cover, Danger Slopes/Blades, (Export) 5 1723410 1 DECAL, Drive Belts[...]

38" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out M oun t H i tc h A ss em b l y an d Leveli ng Adju stment R od using upper set of ho les Hook Spring to Belt Guide Hook Spring {Ref 22 } here when assembled. 1 2 3 4 5 6 7 9 10 11 12 13 14 15 16[...]

PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1723025 1 V-BELT 2 1928957 2 CAPSCREW, Hex Head, 3/8-16 x 2-3/4 3 1677135 1 GUARD, Belt 4 1922755 4 WASHER, Plain, 3/8 5 1716553 1 SPACER 6 1685150 1 PULLEY (Includes Ref. No. 5) 7 1665835 1 GRIP, Lever 8 1704520 1 CLUTCH LEVER ASSEMBLY (Includes Ref. [...]

38" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. GREASE Insert Must Face Out Insert Must Face Out GREASE Insert Must Face Out Mount Hitch A ssembly and Leveling Adjustment Rod using upper set of holes 1 1 2 3 47 3 3 5 5 4 4 3 3 3 6 7 8 9 10 11 12 14 13 3 4 4[...]

PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1930644 2 NUT, Hex Flange Lock, 1/2-13 2 1686686 1 SHAFT & BAR ASSEMBLY (Includes Ref. No. 13) 3 1924366 8 WASHER, Plain, 1-1/4 4 1668513 6 ROLLER 5 1602946 2 SPACER 6 1704073 1 BAR, Roller 7 1704082 2 NUT, Adjuster 8 916965 2 LOCKWASHER, 3/8[...]

38" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. GREASE Insert Must Face Out Insert Must Face Out GREASE Insert Must Face Out Mount Hitch A ssembly and Leveling Adjustment Rod using upper set of holes 1 1 2 3 47 3 3 5 5 4 4 3 3 3 6 7 8 9 10 11 12 14 13 3 4 4[...]

PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1704115 1 PLATE, Support 44 1922606 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/4 45 1704093 1 ROD, Adjustment 46 1706644 1 SPACER 47 1722036 2 ROLLER The above parts group applies to the following Mfg. Nos.: 2004 61 © Copyright Simplicity Manufacturing[...]

38" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Viewed From Bottom Torque to 50-70 ft. lbs. Torque to 45-55 ft. lbs. Apply gasket former to this surface if foam gasket is not used. 13 2 14 10 19 20 21 22 23 24 16 17 18 11 25 34 33 32 31 30 29 28 25 35 27 28 37 2[...]

PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1705449 1 DEFLECTOR, Plastic 2 1960518 1 NUT, Push 3 1960353 2 WASHER, Plain 4 1704873 1 CLAMP 5 1916964 2 LOCKWASHER, 1/4 6 1916622 2 NUT, Hex, 1/4-20 7 1919326 1 WASHER, 5/16, Black 8 1723938 1 SPRING, Torsion 9 1706709 1 ROD, Deflector, Front 10 17[...]

40" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Slot "A" To Slot "B" Slot " B" Slot "A" Insert Must Face Out Use second hole 2 2 17 17 10 30 29 10 35 34 33 32 31 10 30 29 28 27 26 24 23 22 21 20 19 18 17 16 15 14 13 12 1[...]

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1919439 2 NUT, Hex Lock Esna Light, 3/8-16 2 1924940 5 WASHER, 3/8 3 1725408 1 PULLEY, Idler, 4" O.D. 4 1723391 1 V-BELT, Arbor Drive 5 1722175 1 BELT GUIDE 6 1960534 2 WASHER, 3/8 7 1720598 1 ARM ASSEMBLY, Idler with Bushings & Fitting 8 1960[...]

40" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Slot "A" To Slot "B" Slot "B" Slot "A" Insert Must Face Out 2 2 17 17 10 30 29 10 35 31 33 32 31 10 30 29 28 27 26 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 4 3 [...]

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1919439 1 NUT, Hex Lock Esna Light, 3/8-16 2 1924940 6 WASHER, 3/8 3 1725408 1 PULLEY, Idler 4 1723391 1 V-BELT, Arbor Drive 5 1722175 1 BELT GUIDE 6 1960534 2 WASHER, 3/8 7 1724835 1 ARM ASSEMBLY, Idler with Bushings & Fitting, 38 Tooth 8 1931355 [...]

40" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Apply Locktite 380 in hole prior to assemb ly. From "A" To "A" In se r t M ust Fac e Out In se rt Mu st Fac e Out 11 17 15 19 12 18 14 16 13 20 21 27 25 29 22 28 24 23 30 31 37 35 39 32 38 [...]

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1722661 1 ROD 2 1924940 5 WASHER, 3/8 3 1922606 1 CAPSCREW, Hex Head, 3/8-16 x 1 3/4 4 1917421 1 NUT, Hex Jam, 3/8-16 5 1960601 1 NUT, Hex Flange, 3/8-16 Black 6 1720704 1 ROD & WASHER ASSEMBLY, Adjust Handle 7 1651820 1 GRIP, Black Vinyl For[...]

40" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Apply Locktite 380 in hole prior to assemb ly. From "A" To "A" In se r t M ust Fac e Out In se rt Mu st Fac e Out 11 17 15 19 12 18 14 16 13 20 21 27 25 29 22 28 24 23 30 31 37 35 39 32 38 [...]

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1933988 4 NUT, Push, 5/16 44 1665374 3 STRAP, Roller Support 45 1720919 1 DECAL, Height of Cut 46 1720931 1 BRACKET, Height of Cut 47 1930651 1 NUT, Hex Centerlock 3/8-16 48 1935048 1 NUT, Hex Flange Lock, 5/16-18 49 1664847 8 CAPSCREW, Taptite [...]

40" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 50-70 ft. lbs. Torque to 45-55 ft. lbs. Torque to 14-18 ft. lbs. 11 17 15 19 12 14 16 13 21 29 22 30 31 41 18 32 34 35 33 1 7 5 9 2 8 4 6 3 10 6 23 6 18 20 6 24 6 25 6 26 6 27 6 28 6 36 6 37 6 38 6 39 40 [...]

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1931318 1 CARRIAGE BOLT, 1/4-20 x 7/8 2 1960518 1 NUT, Push 3 1960353 2 WASHER, 1/4 4 1704873 1 CLAMP 5 1916964 1 LOCKWASHER, Spring 1/4 6 1916622 1 NUT, Hex 1/4-20 7 1723938 1 SPRING, Torsion 8 1931335 1 CARRIAGE BOLT, 5/16-18 x 1 9 1933988 1 NUT, Pu[...]

40" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Tor que to 4 5-55 ft .lbs. (6 1 -75 N m) Tor que to 45-50 ft/lbs (60 -68 N m) 3 3 2 1 25 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 24 23 22 20 19 17 26 24 23 22 21 3 3 20 19 17 16 15 14 13 12 11 10 9 8 7 6 5 4 1[...]

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1930584 1 CAPSCREW, Hex Head, 7/16-14 x 2-3/4 G8 2 1933263 1 WASHER, 7/16 3 1656916 4 WASHER, Spring 4 960644 1 CAPSCREW, Hex Head, 7/16-14 x 4-1/2 G8 5 1713091 1 PULLEY 6 1719870 1 HUB 7 1724453 2 SPROCKET & FLANGE ASSEMBLY, Riveted, 38 Tooth 8 1[...]

44" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Pulley Movable Idler Pulley Arbor Drive Pulley Arbor Drive Pulley Arbor Drive Pulley Arbor Drive Pulley Movable Idler Pulley Grease Insert Must Face Out Mount Hitch Assembly and Leveling Adjustment Rod using [...]

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1601672 1 V-BELT, Mower Drive 2 1721532 1 V-BELT, Arbor Drive 3 1665835 1 GRIP, Lever 4 1916950 2 NUT, Hex, 3/8-16 5 1916965 2 WASHER, Lock, 3/8 6 1677135 1 BELT STOP, Idler 7 1924940 14 WASHER, 3/8 8 1666294 2 SPACER, 25/64 x 21/32 x 7/16, Powder Meta[...]

44" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Insert Must Face Out GREASE Feet tow ards discharge Mount Hitch Assembly and Leveling Adjustment Rod using upper set of holes for 15" f ront tires using lower set of holes for 16"[...]

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1685443 1 SHAFT & BAR ASSEMBLY, 44" (Includes Ref. No. 9) 2 1704082 1 NUT, Adjuster 3 960641 3 NUT, Hex Aluminum Insert Lock, 3/8-16 4 1677507 1 SLIDE 5 1924361 1 WASHER, Plain, 1/2 6 172622 1 BOLT, Shoulder, 3/ 8-16 7 1602946 2 SPACER, [...]

44" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Insert Must Face Out GREASE Feet tow ards discharge Mount Hitch Assembly and Leveling Adjustment Rod using upper set of holes for 15" f ront tires using lower set of holes for 16"[...]

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1704083 1 ARM, Rear, Mower, RH 44 1921977 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/4 45 1704087 1 TRUNNION, Threaded 46 1719901 1 CRANK, Height of Cut 47 1714084 1 KNOB, Height Crank 48 1960093 1 PAL NUT The above parts group applies to the following[...]

44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque screws to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used. Fill arbors with multipurpose grease after gasket former has cure[...]

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY, 4-1/2 O.D. 4 1713158 1 HUB, Double Pulley 5 1713098 3 PULLEY, 4-1/4 O.D. 6 1713533 1 HUB, Double Pulley 7 1655729 3 COVER, Arbor Housing 8 108202 3 BEARING, B[...]

44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque screws to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used. Fill arbors with multipurpose grease after gasket former has cure[...]

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 42 1927557 2 NUT, Hex Flagne Whiz Lock, 5/16-18 43 1724538 1 BAFFLE, Blowout, 44" & 50" The above parts group applies to the following Mfg. Nos.: 2004 85 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. 1694037 - 44" M[...]

44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 5 0-70 ft. lb s. (67-95 Nm.) Torque sc rews to 45-55 ft. lb s. (61- 75 Nm) Apply gaske t former to this s urface if foam ga sket is no t used . Fill a rbors with multipur pose grease after gas ket fo[...]

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY 4 1713158 1 HUB, Double Pulley 5 1713098 3 PULLEY 6 1713533 1 HUB, Double Pulley 7 1655729 3 COVER, Arbor Housing 8 108202 3 BEARING, Ball, 3/4 x 1-3/4 x 5/8 9[...]

44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 5 0-70 ft. lb s. (67-95 Nm.) Torque sc rews to 45-55 ft. lb s. (61- 75 Nm) Apply gaske t former to this s urface if foam ga sket is no t used . Fill a rbors with multipur pose grease after gas ket fo[...]

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 42 1931333 8 CARRIAGE BOLT, 5/16-18 x 3/4, Black (CE Only) 43 1927557 8 NUT, Hex Flange Whiz Lock, 5/16-18, Black (CE Only) 44 1716878 1 BAFFLE, Anti-Blowout, RH (CE Only) The above parts group applies to the following Mfg. Nos.: 2004 89 © Copyright Si[...]

50" Mower Deck - Cl ut ch & Support NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Pul ley Movable Idler Pul le y Arbor Drive Pul ley Arbor Drive Pul ley Arbor D r ive Pul ley Arbor Drive Pul ley Movabl e Idler Pulley Grease Mount Hitch Assembly and • Level ing A djustm ent R od using lower set[...]

PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Cl ut ch & Support Footnote s 1 1707740 1 V-BELT, Mower Drive 2 1703836 1 V-BELT, Arbor Drive 3 1665835 1 GRIP, Lever 4 1916950 2 NUT, Hex, 3/8-16 5 1916965 2 WASHER, Lock, 3/8 6 1677135 1 BELT STOP, Idler 7 1924940 14 WASHER, 3/8 8 1716553 1 HUB, 25/64 x 3/4 x 63/64, Powder Metal 9 168515[...]

50" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Mount Hitch Assembly and • Leveling Adjustment Rod using lower set of h oles 4 GREASE GREASE 16 15 14 17 18 19 20 21 6 20 21 1 2 3 48 34 43 37 10 38 36 40 39 41 47 46 45 44 43 42 22 17 2[...]

PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1719901 1 CRANK, Cutting Height 2 1714084 1 KNOB, Height Crank 3 1960093 1 PAL NUT 4 1924366 8 WASHER, Plain, 1 1/4 5 1709195 3 SPACER, 21/32 x 5/32 x 5/8 6 1668513 8 ROLLER 7 925094 2 TIE, Self Locking 8 1708266 2 CHAIN, 6 Link, 8 13/32 Long 9 1[...]

50" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Mount Hitch Assembly and • Leveling Adjustment Rod using lower set of h oles 4 GREASE GREASE 16 15 14 17 18 19 20 21 6 20 21 1 2 3 48 34 43 37 10 38 36 40 39 41 47 46 45 44 43 42 22 17 2[...]

PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1917372 2 NUT, Hex, 5/16-18 44 1917356 2 WASHER, Lock, 5/16 45 1704116 1 BRACKET, Cutting Height 46 1704083 1 ARM, Rear, Mower, RH 47 1921977 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/4 48 1704087 1 TRUNNION, Threaded The above parts group applies to [...]

50" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque s crews to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used. Fill arbors with multipurpose grease after gasket former has cur[...]

PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY 4 1713158 1 HUB, Double Pulley 5 1713098 3 PULLEY 6 1713533 1 HUB, Double Pulley 7 1655729 3 COVER, Arbor Housing 8 108202 3 BEARING, Ball, 3/4 x 1-3/4 x 5/8 9[...]

50" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque s crews to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used. Fill arbors with multipurpose grease after gasket former has cur[...]

PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Housin g, Arbors & Blades Footnote s 42 1713197 2 HUB, Pulley, Center & RH 43 1724538 1 BAFFLE, Anti-Blowout 44 1927557 2 NUT, Hex, Whizlock, 5 /16-18 45 1931333 2 CARRIAGE BOLT, 5/16-18 x 3/4 The above parts group applies to the following Mfg. Nos.: 2004 99 © Copyright Simplicity Man[...]

[...]

T or que Specification Char t FOR ST ANDARD MACHINE HARDWARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.1 43 4.9 60 6.8 10-32 31 3.5 49 5.5 68 7.7 1/4-20 66 7.6 8 10.9 12 16.3 1/4-28 76 8.[...]

500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.c om MANUFACTURING, INC. © Copyright Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA. 2004[...]