Sony CFD-CD777S manuale d’uso

3-864-133- 11 (1)  1998 by Sony Corporation CD Radio Cassette-Cor der Operating Instructions CFD-CD777S CFD-CD777L[...]

Introduction 2 Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Warning Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. The FUNCTION selector is located at the front. When y[...]

Basic Operations 3 Introduction T able of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape 12 Dubbing The CD Player 14 Using the display 15 Locating a specific track 16 Playing tracks repeatedly (Repeat Play) 17 Creating your own program (Program Play) The Tape Player 19 Recording through a m[...]

Basic Operations 4 Playing a CD Basic Operations For hookup instructions, see pages 20 – 22. 1 Set FUNCTION to CD. 2 Press 6 PUSH OPEN/CLOSE down to open the lid of the CD compartment and place a CD on the CD compartment. 3 Close the lid of the CD compartment. With the label side up 14 2,3 CD TAPE RADIO TV/ LINE IN DUBBING FUNCTION CD/RADIO OFF[...]

Basic Operations Basic Operations 5 Display 4 Press ^ ( ( on the remote). The player plays all the tracks once. Playing time Track number Use these buttons for additional operations To Do this adjust the volume Turn VOLUME. stop playback Press p . pause playback Press ^ . (on the remote, press P .) Press the button again to resume play after pause.[...]

Basic Operations 6 Listening to the radio For hookup instructions, see pages 20 – 22. 1 Set FUNCTION to RADIO. 2 Set BAND to select the band you want. 3 Turn TUNING to tune in the station you want. For better SW reception, use FINE TUNING. CFD-CD777S CFD-CD777L 3 12 3 CD TAPE RADIO TV/ LINE IN DUBBING FUNCTION CD/RADIO OFF FM SW2 SW1 MW BAND FM M[...]

Basic Operations Basic Operations 7 Use these buttons for additional operations Tips • During operation, the level meter shows the frequency level of the sound. Adjusting the volume will not affect the level meter. • If the FM broadcast is noisy, set ISS•FM MODE at the rear to “MONO”. Radio will play in monaural. To Do this adjust the vol[...]

Basic Operations 8 Playing a tape For hookup instructions, see pages 20 – 22. 1 Set FUNCTION to TAPE•CD/ RADIO OFF. 2 Press p6 to open tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. 3 Press PLAY ( . The player starts playing. With the side you want to play facing you 32 1 32 CD TAPE RADIO TV/ [...]

Basic Operations Basic Operations 9 Use these buttons for additional operations To Do this adjust the volume Turn VOLUME. stop playback Press p6 . fast-forward or rewind Press ) or 0 . the tape pause playback Press P . Press the button again to resume play after pause. play the opposite side of Press down DIRECTION the tape (deck A only) once. DIRE[...]

Basic Operations 10 Recor ding on a tape Display For hookup instructions, see pages 20 – 22. 1 Press p6 to open the tape compartment on deck B and insert a blank tape. 2 Select the program source you want to record. To record from the CD player, set FUNCTION to CD and insert a CD (see page 4). To record from the radio, set FUNCTION to RADIO, and [...]

Basic Operations Basic Operations 11 Notes • During recording, do not press ) , 0 or PLAY on deck A as this causes excessive wow and flutter. • While recording from the built-in microphone (MIC), no sound comes from the speakers or the headphones. • When you connect the microphone to the MIX MIC jack, you cannot record from the built-in micro[...]

Basic Operations 12 Dubbing For hookup instructions, see pages 20 – 22. 1 Insert a recorded tape into deck A and a blank tape into deck B. 2 Set FUNCTION to DUBBING. 3 To dub at high speed, press HIGH SPEED DUBBING to ON. To dub at normal speed, press HIGH SPEED DUBBING to OFF. With the side you want to record on facing you 24 1 1 43 STOP/EJECT C[...]

Basic Operations Basic Operations 13 4 Press P and then press PLAY on deck A. 5 Start dubbing. Press r on deck B ( ( is depressed automatically). Deck A Deck B Note During dubbing, do not set FUNCTION or press HIGH SPEED DUBBING as this causes excessive wow and flutter. Tips • Adjusting the volume or the audio emphasis (see page 24) will not affe[...]

The CD Player 14 Using the display You can check information about the CD using the display. The CD Player DISPLAY Checking the total track number and playing time Check the display in stop mode. Checking the remaining time Press DISPLAY (DISPLAY/ENTER on the player) while playing a CD. To display Press DISPLAY remaining time on the once current tr[...]

The CD Player 15 The CD Player Locating a specific track You can quickly locate any track using the number buttons. You can also find a specific point in a track while playing a CD. Number buttons = , + To locate Press a specific track directly the number button of the track. a point while listening to + (forward) or = (backward) the sound while pl[...]

The CD Player 16 Playing tracks r epeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 17). 1 Set FUNCTION to CD on the player. 2 Press MODE (PLAY MODE on the player) until the repeat mode you want appears in the display. To repeat Select a single track REP 1 all the tracks REP ALL tracks in rand[...]

The CD Player 17 The CD Player Cr eating your own pr ogram (Program Play) You can arrange the playing order of up to 20 tracks on a CD. Number buttons 1 Set FUNCTION to CD on the player. 2 Press MODE until “PGM” appears in the display. 3 Press the number buttons for the tracks you want to program in the order you want. 4 Press ( to start progra[...]

The CD Player 18 Creating your own program (Program Play) (continued) Tips • You can play the same program again, since the program is saved until you open the CD compartment or switch FUNCTION. • The current program will be erased if you switch FUNCTION or open the CD compartment. • You can record your own program. After you’ve created the[...]

The Tape Player 19 The Tape Player Recor ding thr ough a micr ophone/Using as a P A system Y o u c a n r e c o r d s o u n d u s i n g a m i c r o p h o n e ( n o t s u p p l i e d ) o r u s e p l a y e r a s a p u b The Tape Player Tip Y o u c a n m i x C D o r r a d i o s o u n d s a n d r e c o r d t h e m b y a d d i n g y o u r v o i c e o r o[...]

Setting Up 20 Setting Up Hooking up the system Make sure you turn off the power before making any connections. 1 Hooking up the speakers 1 Align the grooves and slide the speaker box down until it snaps into place A. Tips • To detach the speakers, unlock speaker (see B on the diagram) and slide the speaker box all the way up and away from the pla[...]

Setting Up 21 Setting Up Tip Only for the customers supplied with an AC plug adaptor: Use the supplied AC plug adaptor if the plug of the AC power cord does not match your outlet. 2 Connect the black wires to (–) minus and the red wires to (+) plus terminals; the right speaker wires to the R and the left speaker wires to the L terminals. 2 Connec[...]

Setting Up 22 Hooking up the system (continued) 3 Inserting batteries into the remote Insert two R6 (size AA) batteries (not supplied) Replacing batteries With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones. 4 Using the player on batteries Insert eig[...]

Setting Up 23 Setting Up Connecting optional components You can enjoy the sound from a TV or VCR through the speakers of this player. For details, refer to the instruction manual of the component to be connected. Before making connections, be sure to turn off the power of each equipment, and set FUNCTION to TAPE•CD/RADIO OFF. 1 Connect a componen[...]

Setting Up 24 Adjusting the audio emphasis (DYNAMIC SOUND SYSTEM) You can adjust the audio emphasis of the sound you are listening to. Using the 5 BAND GRAPHIC EQUALIZER Slide 5 BAND GRAPHIC EQUALIZER to select the audio emphasis you want. Use To adjust MEGA BASS deep bass sound 400 Hz speaking voice, middle frequencies of instrumental music 1 kHz [...]

Additional Information 25 Pr ecautions Additional Information On placement • Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. • Do not place the player on an inclined or unstable place. • Do not place anything within 10 mm of the side of the cabinet. The ven[...]

Additional Information 26 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. • Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it[...]

Additional Information 27 T r oubleshooting Remedy • Connect the AC power cord to a wall outlet securely. • Make sure the batteries are inserted correctly. • Set FUNCTION to the position you want to operate. • Adjust the volume. • Unplug the headphones when listening through speakers. • Insert the CD with the label surface up. • Make [...]

Additional Information 28 Remedy • Close the tape compartment securely. • Make sure the safety tab on the cassette is in place. • Make sure FUNCTION is set to “TAPE” or “DUBBING”. • Clean the erasing head (see page 29.) • Replace all the batteries with new ones if they are weak. • Make sure the tape is inserted properly. • Mak[...]

Additional Information 29 Maintenance After cleaning, insert a tape when the areas cleaned are completely dry. Demagnetizing the tape heads After 20 to 30 hours of use, enough residual magnetism will have built up on the tape heads to begin to cause loss of high frequency sound and hiss. At this time, you should demagnetize the heads and all metal [...]

Additional Information 30 Specifications CD player section System Compact disc digital audio system Laser diode properties Material: GaAlAs Wave length: 780 nm Emission duration: Continuous Laser output: Less than 44.6 µ W (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block [...]

Additional Information 31 Dimensions Approx. 761 × 245 × 258 mm (w/h/d) (30 × 9 3 ⁄ 4 × 10 1 ⁄ 4 inches) (incl. projecting parts) Mass Approx. 9.5 kg (20 lb. 15 oz) (incl. batteries) Supplied accessory AC power cord (1) Remote control (1) Design and specifications are subject to change without notice. Optional accessories Sony MDR headphone[...]

Additional Information 32 Index A Audio emphasis 24 B BALANCE 24 Batteries for player 22 for remote 22 C CD player 14 Cleaning cabinet 29 lens 29 tape heads and tape path 29 Connecting AC power cord 21 optional components 23 Creating your own program 17 D, E, F Demagnetizing the tape heads 29 Display 14 Dubbing 12 G, H GRAPHIC EQUALIZER 24 I, J, K [...]