Sony CMT-EX1 manuale d’uso

Compact Component System 3-867-450- 13 (1) ©1999 Sony Corporation CMT -EX1 Operating Instructions Owner’s Record The model and serial numbers are located on the rear of the system. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No.[...]

2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER P[...]

3 T able of Contents Getting Started Step 1: Hooking up the system ................ 4 Step 2: Setting the time ............................ 6 Step 3: Presetting radio stations ............... 7 Saving the power in standby mode ........... 8 Basic Operations Playing a CD ............................................. 9 Listening to the radio ........[...]

4 Getting Started Step 1: Hooking up the system Perform the following procedures 1 to 5 to hook up your system using the supplied cords and accessories. The front cover is made of tempered glass. Please remember to handle this unit carefully. 5 1 4 3 2 1 Remove the rear cover. Push in on the tabs and pull up the cover 2 Connect the speakers. Connec[...]

5 Getting Started 3 Connect the AM antenna. Set up the AM loop antenna, then connect it. Connect the white cord to the U terminal, and the red cord to the other terminal. Note Keep the antenna away from the speaker cords to prevent noise. 4 Reinstall the rear cover. Put the wires through the hole at the bottom of the rear cover. 5 Connect the AC po[...]

6 Step 2: Setting the time You must set the time before you can use the timer functions. The clock is on a 24-hour system for the European model, and a 12-hour system for other models. The 24-hour system model is used for illustration purpose. Set the time before turning the power on. DISPLAY 2,3,4 1 2,3,4 1 Press TIMER SET while the power is off. [...]

7 Getting Started Step 3: Presetting radio stations You can preset the following number of stations: – 20 for FM, 10 for AM. 4,6 1 5 6 2 3,4 1 Press ?/1 to turn on the system. 2 Press TUNER/BAND repeatedly until the band you want appears in the display. Each time you press the button, the band changes as follows: FM y AM 3 Press TUNING MODE repea[...]

8 Step 3: Presetting radio stations (continued) To change the AM tuning interval (except for European model) The AM tuning interval is factory-set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the TUNING + button, turn the power back on. When you change t[...]

Basic Operations 9 1 Touch Z (or press OPEN/CLOSE on the remote) to raise the disc tray. 2 Place a CD vertically in the tray. To lower the disc tray, touch Z (or press OPEN/CLOSE on the remote) again. 3 Press NX (or CD H on the remote). Play starts. With the label side front. When you play a 8 cm CD, use the optional adaptor. Basic Operations Playi[...]

10 Listening to the radio Preset radio stations in the tuner’s memory first (see page 7). To turn on the system, press "/1 . ?/1 NX x . m M > VOL –/+ TUNER/ BAND ./> TUNING –/+ Z VOL +/– 1 2 3 STEREO/ MONO "/1 (Power) "/1 (Power) To Do this Stop play Press x . Pause Press NX (or S on the remote). Press again to resum[...]

Basic Operations 11 To cancel the Automatic Tuning Press TUNING MODE. Tips • You can switch from another source to the tuner by pressing TUNER/BAND (Automatic Source Selection). • If you press TUNER/BAND while the power is off, the power turns on and the system tunes in the last received station automatically (One Touch play). • To improve br[...]

12 The CD Player Playing the CD tracks in random or der –– Shuf fle Play You can play all the tracks on a CD in random order. 3 1 2 l/L 1 Press FUNCTION repeatedly until “CD” appears. 2 Press CD PLAY MODE repeatedly until “SHUF” appears. SHUF 3 Press CD H . Shuffle Play starts. “ ; ” appears, and all the tracks play in random order.[...]

13 The CD Player Programing the CD tracks –– Program Play You can make a program up to 24 tracks in the order you want them to be played. 5 1 2 3 3 s 1 Press FUNCTION repeatedly until “CD” appears. 2 Press CD PLAY MODE repeatedly until “PGM” appears. 3 Press l/L until the desired track number appears, then press ENTER. 4 To program addi[...]

14 Playing the CD tracks repeatedly –– Repeat Play You can repeat a CD in normal play, Shuffle Play and Program Play. 2 1 1 Press FUNCTION repeatedly until “CD” appears. 2 Press REPEAT during play until “REP” or “REP 1” appears. REP REP: For all the tracks on the CD; Play mode Repeat Normal All the tracks in their original order To [...]

15 The CD Player Using the CD display You can check the total number of tracks, the total playing time, and the remaining time of the track or the CD. When a CD TEXT disc is loaded, you can check the information stored on the CD, such as the titles or artist names. DISPLAY FUNCTION Checking the total playing time 1 Press FUNCTION repeatedly until ?[...]

16 Other Features Selecting the surround effect You can enjoy the encompassing effects of surround sound. SURROUND , Press SURROUND. Each time you press the button, the display changes as follows: SURR ON y SURR OFF When SURROUND is ON, “SURR” lights up in the display. To cancel SURROUND Press SURROUND to turn off “SURR.” Generating a more [...]

17 Other Features continued Using the Radio Data System (RDS) (European model only) What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. Note RDS may not work properly if the station you have tuned in is not transmitting the [...]

18 Falling asleep to music (continued) To check the remaining time Press SLEEP once. To change the remaining time Press SLEEP repeatedly to select the time you want. To cancel the Sleep Timer function Press SLEEP repeatedly until “OFF” appears. Tip You can use the Sleep Timer, even if you have not set the clock. Note When the Sleep Timer is use[...]

19 Other Features 4 Press +/– repeatedly until “TIMER SET” appears then press ENTER. The hour indication flashes. 5 Set the time to start playback. Press +/– to set the hour, then press ENTER. The minute indication flashes. Press +/– to set the minute, then press ENTER. The hour indication flashes again. 6 Set the time to stop playback fo[...]

20 Optional Components Connecting audio components To enhance your system, you can connect optional components. Refer to the instructions of each component. To connect optional components , remove the small rear cover first. Connecting an MD deck for digital recording You can record from CD into the MD deck digitally by connecting an optional cable[...]

21 Optional Components Listening to the sound of connected components 2 1 Prepare the audio components. 2 Press FUNCTION repeatedly until “TAPE” appears. Each time you press the button, the function display changes as follows: t TUNER t TAPE t CD To attenuate the distortion from the connected components You can change the audio input level for [...]

22 75-ohm coaxial cable (not supplied) Insulated wire (not supplied) Recording a CD on an MD/a tape For the operations of the connected components, refer to the instructions of each component. 2 4 1 Prepare the recording component for recording. 2 Press FUNCTION repeatedly until “CD” appears. 3 Start recording. 4 Press CD H . Play starts. Conne[...]

23 Optional Components/Additional Information continued Additional Information Precautions The nameplate is located on the bottom exterior. On safety • The glass over the display window on the cover is made of tempered glass. Under normal conditions, this tempered glass is more shock resistant and able to bear more weight than ordinary glass. Thi[...]

24 Precautions (continued) On operation If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player. Should this occur, the system will not operate properly. Remove the CD and leave the system turned on for about 2 hours until the moisture evaporates. If [...]

25 Additional Information CD Player The CD cannot be read. • The CD was not placed in the disc tray properly. Place a CD vertically in the tray. The CD will not eject. • The CD has tape, stickers, or paste on it. The CD will not play. • The CD is dirty. Clean the CD with a cleaning cloth. • The face of the CD is scratched. Exchange the CD. [...]

26 Specifications Amplifier section For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 4 ohm loads both channels driven, from 70 – 20,000 Hz; rated 10 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250 milliwatts to rated output. Canadian model: Continuous RMS[...]

27 Additional Information Speaker Speaker system 2-way, bass-reflex type Speaker units Woofer: 9 cm (3 5 / 8 in) dia., cone type Tweeter: 2 cm ( 13 / 16 in) dia., balanced drive Impedance 4 ohms Dimensions 130 × 216 × 183 mm (5 1 / 8 × 8 5 / 8 × 7 1 / 4 in) (w/h/d, incl. projecting parts and controls) Mass Approx 1.8 kg (3 lb 15 oz.) net per sp[...]

Sony Corporation Printed in China Index A Adjusting the sound 16 the volume 10, 11 Antennas 5, 22 Automatic Source Selection 10, 11 Automatic Tuning 7, 11 B Batteries 5 C CD player 9, 12 Clock setting 6 Connecting. See Hooking up D, E, F, G Daily Timer 18 Display 6, 15 DSG (Dynamic Sound Generator) 16 H, I, J, K Hooking up optional components 20 th[...]