Sony DSR-PD100A/PD100AP manuale d’uso

3-867-703- 13 (1) ©1999 Sony Corporation DSR-PD100A/PD100AP Digital Camcor der Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these number[...]

2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER•SERVICEABLE P ARTS INSIDE. REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. CAUTION For the Customers in the U.S.A. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void[...]

3 Before you begin For the Customers in Europe (DSR- PD100AP) This product with the CE marking complies with both the EMC Directive (89/336/EEC) and Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European standards: • EN60065:Product Safety[...]

4 T able of contents Before you begin Using this manual .............................................. 5 Checking supplied accessories ........................ 7 Getting started Installing and charging the battery pack ....... 8 Inserting a cassette ........................................... 12 Basic operations Camera recording ...................[...]

5 Before you begin Before you begin Using this manual The instructions in this manual are for the two models listed below. Before you start reading this manual and operating the unit, check your model number by looking at the bottom of your camcorder. The DSR-PD100A is the model used for illustration purposes. Otherwise, the model name is indicated[...]

6 Using this manual [a] [b] Precautions on camcorder care • The LCD screen and/or the color viewfinder are manufactured using high-precision technology. However, there may be some tiny black points and/or bright points (red, blue or green in color) that constantly appear on the LCD screen and/or in the viewfinder. These points are normal in the m[...]

7 Before you begin Check that the following accessories are supplied with your camcorder. Checking supplied accessories 1 Wireless Remote Commander (1) (p. 142) 2 AC-L10A AC power adaptor (1), Power cord (mains lead) (1) (p. 9, 27) The shape of the plug varies from region to region. 3 NP-F330 battery pack (1) (p. 8) 4 Size AA (R6) battery for Remot[...]

8 Getting started Installing and charging the battery pack Before using your camcorder, you first need to install and charge the battery pack. To charge the battery pack, use the supplied AC power adaptor. This camcorder operates only with the “InfoLITHIUM” battery pack. “InfoLITHIUM” is a trademark of Sony Corporation. Installing the batte[...]

9 Getting started Notes • “– – – min” appears on the display window until the camcorder calculates remaining battery time. • Remaining battery time indication on the display window roughly indicates the recording time with the viewfinder. Use it as a guide. It may differ from the actual recording time. Installing and charging the batt[...]

10 Battery life While using with viewfinder Battery pack Continuous recording time * Typical recording time ** NP-F330 (supplied) 70 (65) 40 (35) NP-F530 115 (105) 55 (50) NP-F550 145 (130) 70 (65) NP-F730 260 (235) 135 (125) NP-F750/NP-F730H*** 295 (265) 160 (140) NP-F930 405 (370) 210 (185) NP-F950 465 (420) 235 (220) NP-F960 550 (495) 280 (250) [...]

11 Getting started Installing and charging the battery pack Notes on remaining battery time indication during recording • Remaining battery time is displayed on the LCD screen or in the viewfinder. However, the indication may not be displayed properly, depending on using conditions and circumstances. • When you close the LCD panel or open it, i[...]

12 Inserting a cassette You can use mini DVCAM cassette with logo*. Make sure that the power source is installed. (1) While pressing the small blue button on the EJECT switch, slide it in the direction of the arrow. The cassette compartment automatically opens. (2) Insert a cassette with the window facing out. (3) Close the cassette compartment by [...]

13 Basic operations Basic operations Camera r ecording Make sure that the power source is installed and a cassette is inserted. Before you record one-time events, you had better make a trial recording to make sure that the camcorder is working correctly. When you use the camcorder for the first time, power on it and reset the date and time to your [...]

14 To focus the viewfinder lens If you cannot see the indicators in the viewfinder clearly, or after someone else has used the camcorder, focus the viewfinder lens. Move the viewfinder lens adjustment lever so that the indicators in the viewfinder come into sharp focus. Note on Standby mode If you leave the camcorder in Standby mode for 5 minutes w[...]

15 Basic operations Attaching the lens hood When the supplied wide conversion lens is not attached to the camcorder, we recommend you to attach the lens hood to record fine pictures, no matter where you shoot. You can also attach the lens cap when using the lens hood. If the lens hood is not attached properly The four corners of the screen may be e[...]

16 180° 90° 90° LCD BRIGHT 12 OPEN 90° Camera recording Zooming of more than 12x – digital zoom • If you set the D ZOOM function to ON in the menu system, you can perform zooming of more than 12x performed digitally. It is set to OFF at the factory. • You cannot use the digital zoom when you set PROG. SCAN to ON in the menu system. • Th[...]

17 Basic operations Notes on the LCD panel • When closing the LCD panel, turn it vertically until it clicks [a] . • When turning the LCD panel, turn it always vertically; otherwise, the camcorder body may be damaged or the LCD panel may not close properly [b] . • Close the LCD panel completely when not in use. • Do not push nor touch the LC[...]

18 Camera recording Notes on mirror mode • When you turn the LCD panel about 135 degrees to 180 degrees, the camcorder enters mirror mode. • Using the mirror mode, you can record yourself while watching yourself on the LCD screen. • The picture on the LCD screen looks like a mirror-image while recording in mirror mode. The STBY indicator appe[...]

19 Basic operations Self-timer recording You can make a recording with the self-timer. This mode is useful when you want to record yourself. ( 1 ) Press (self-timer) to display (self-timer) on the LCD screen or in the viewfinder while the camcorder is in Standby mode. ( 2 ) Press START/STOP. Self-timer starts counting down to 10 with a beep sound. [...]

20 Hints for better shooting For hand-held shots, you will get better results by holding the camcorder according to the following suggestions: • Hold the camcorder firmly and secure it with the grip strap so that you can easily manipulate the controls with your thumb. [a] • Place your elbows against your side. • Place your left hand under the[...]

21 Basic operations Place the camcorder on a flat surface or use a tripod Try placing the camcorder on a table top or any other flat surface of suitable height. If you have a tripod for a still camera, you can also use it with the camcorder. When attaching a non-Sony tripod, make sure that the length of the tripod screw is less than 6.5 mm (9/32 in[...]

22 Using the EDITSEARCH, you can review the last recorded scene or check the recorded picture on the LCD screen or in the viewfinder. (1) While pressing the small green button on the POWER switch, set it to CAMERA. (2) Press the РΠside of EDITSEARCH momentarily; the last few seconds of the recorded portion plays back (Rec Review) . Hold down t[...]

23 Basic operations Playing back a tape You can monitor the playback picture on the LCD screen or in the viewfinder. ( 1 ) Insert the recorded tape with the window facing out. ( 2 ) While pressing OPEN, open the LCD panel. ( 3 ) While pressing the small green button on the POWER switch, set it to VTR. ( 4 ) Press 0 to rewind the tape. ( 5 ) Press ?[...]

24 Playing back a tape To view the playback picture in the viewfinder Close the LCD panel. The viewfinder turns on automatically. When using the viewfinder, you can monitor the sound only by using headphones. To view on the LCD screen again, open the LCD panel. The viewfinder turns off automatically. Note on DV-formatted tapes You can play back DV-[...]

25 Basic operations Searching for the end of the pictur e You can go to the end of the recorded portion after you record and play back the tape. The tape starts rewinding or fast-forwarding and the last about 5 seconds of the recorded portion plays back. Then the tape stops at the end of the recorded picture (End Search) . Open the LCD panel and pr[...]

26 Advanced operations Using alternative power sources You can choose any of the following power sources for your camcorder: battery pack, and house current (mains). Choose the appropriate power source depending on where you want to use your camcorder. Place Power source Accessory to be used Indoors House current (Mains) Supplied AC power adaptor O[...]

27 Advanced operations Using alternative power sources 2, 3 1 Using the house current (mains) To use the supplied AC power adaptor: ( 1 ) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN jack on the camcorder. ( 2 ) Connect the power cord (mains lead) to the AC power adaptor. ( 3 ) Connect the power cord (mains lead) to a wa[...]

28 You can change some of the mode settings programed at the factory to further enjoy the features and functions of the camcorder. Just turn the control dial to select the menu items displayed on the LCD screen. You can make selections in the following order: the menu display n icons n items n mode settings. ( 1 ) Press MENU to display the menu. ( [...]

29 Advanced operations Changing the mode settings Selecting the mode setting of each item Menu items that can be modified differ depending on the setting of the POWER switch. The LCD screen shows only the items that you can operate at the moment. The menu items are categorized into nine groups signified by the nine icons described below. Items for [...]

30 Changing the mode settings AUDIO MIX* Select this item to adjust the balance between the stereo 1 and stereo 2 by turning the control dial. NTSC PB <ON PAL TV/NTSC 4.43> (DSR-PD100AP only) • Normally select ON PAL TV. • Select NTSC 4.43 when playing back a tape recorded in the NTSC color system. When you play back on a Multi System TV,[...]

31 Advanced operations Changing the mode settings PHOTO SAVE Select this item to duplicate still pictures. See page 100 for details. Items for the CM SET menu CM SEARCH <ON/OFF> • Select ON to search using cassette memory. • Select OFF to search without using cassette memory. TITLEERASE Erase the title you have superimposed. TITLE DSPL &l[...]

32 Changing the mode settings Items for the OTHERS menu WORLD TIME Select this item to set the clock by a time difference. See page 121 for details. BEEP <MELODY/NORMAL/OFF> • Normally select NORMAL so that beeps sound when you start/stop recording, etc. • Select MELODY so that a melody sounds when you start/stop recording, etc. • Selec[...]

33 Advanced operations You can record a still picture like a photograph for about seven seconds. This photo recording is useful when you want to enjoy a picture such as a photograph or when you print a picture using a video printer (not supplied). You can record about 340 pictures on a 40-minute tape. Besides the operation described here, this camc[...]

34 LINE IN VIDEO S VIDEO Printing the still picture You can print a still picture by using the video printer (not supplied). Connect the video printer using the S video connecting cable (not supplied). Refer to the operating instruction of the video printer as well. If the video printer is not equipped with S VIDEO input Use the supplied A/V connec[...]

35 Advanced operations Shooting with all the pixels – PROG. SCAN When modifying the digital images on your personal computer, set PROG. SCAN to ON before shooting. You can record the images on a mini DVCAM tape frame by frame with higher resolution. Since the image taken in progressive mode hardly ever goes out of focus even during pauses, it is [...]

36 You can fade in or out to give your recording a professional appearance. When fading in, the picture gradually fades in while the sound increases. When fading out, the picture gradually fades out while the sound decreases. FADER OVERLAP (FADE IN only) MONOTONE When fading in, the picture gradually changes from black and white to color. When fadi[...]

37 Advanced operations To cancel the fader function Before pressing START/STOP, press FADER until the fade indicator disappears. You cannot use the fader function in the following situations – The camcorder is in the photo recording. – A title is displayed on the LCD screen or in the viewfinder. If the title is not necessary, erase it before us[...]

38 When you shoot a subject with the light source behind the subject or a subject with a light background, use the BACK LIGHT function. Press BACK LIGHT. The c indicator appears on the LCD screen or in the viewfinder. [ a ] Subject is too dark because of backlight. [ b ] Subject becomes bright with backlight compensation. After shooting Be sure to [...]

39 Advanced operations You can record a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9WIDE). The picture with black bands at the top and the bottom on the LCD screen or in the viewfinder [a] is normal. The picture on a normal TV [b] is horizontally compressed. You can watch the picture of normal images on a wide-screen TV [c] . ( 1 ) S[...]

40 Enjoying pictur e effect Selecting picture effect You can make pictures like those of television with the Picture Effect function. NEG. ART [a] The color of the picture is reversed. SEPIA The picture is sepia. B&W The picture is monochrome (black and white). SOLARIZE [b] The light intensity is clearer, and the picture looks like an illustrat[...]

41 Advanced operations Using picture effect function ( 1 ) While in Standby mode, press PICTURE EFFECT. ( 2 ) Turn the control dial to select the desired picture effect mode. To return to normal mode Press PICTURE EFFECT so that the indicator disappears. Notes on the picture effect • When you turn the power off, the camcorder returns automaticall[...]

42 Recor ding with various effects – digital ef fect With the following functions of Digital Effect, you can add various visual effects to the picture. The sound is recorded normally. STILL You can record a still picture to be superimposed on a moving picture. FLASH You can record still pictures successively at constant intervals. LUMI. You can r[...]

43 Advanced operations To cancel digital effects Press DIGITAL EFFECT so that the indicator disappears. Notes on digital effect • You cannot use the following functions while using the digital effect. – Functions using the FADER button – Functions using the PHOTO button • When you set the POWER switch to OFF, the digital effect will be canc[...]

44 Shooting with manual adjustment Under normal conditions, this unit automatically makes various adjustments as it shoots. However, you can adjust manually the following functions to your preference. Functions you can adjust by setting the AUTO LOCK selector to the center (auto lock release) position Brightness (exposure), shutter speed, white bal[...]

45 Advanced operations Shooting with manual adjustment To return to automatic exposure mode Set AUTO LOCK selector to AUTO LOCK or press EXPOSURE to turn off the exposure indicator. Notes • The control dial does not have a stop position. • If you press PROGRAM AE, the exposure comes back to automatic adjustment again. • When you adjust the ex[...]

46 Shooting with manual adjustment Adjusting the white balance White balance adjustment makes white subjects look white and allows more natural color balance for camera recording. Normally white balance is automatically adjusted. You can obtain better results by adjusting the white balance manually when lighting conditions change quickly or when re[...]

47 Advanced operations If you have selected ∑ in step 3 When you set the white balance to one-push white balance mode, the setting is locked and maintained even if lighting conditions change. You can achieve recording with natural colors without being affected by ambient light. (With the ∑ indicator on the screen) (1) Shoot a white object such [...]

48 Shooting with manual adjustment Adjusting recording level You can adjust the recording sound level. Use headphones to monitor the sound when you adjust. ( 1 ) Set the POWER switch to CAMERA. ( 2 ) Press MENU to display the menu. ( 3 ) Turn the control dial to select , then press the dial. ( 4 ) Turn the control dial to select MIC LEVEL, then pre[...]

49 Advanced operations Shooting with manual adjustment Using the ND filter Using the ND filter (corresponds to 16% of the quantity of light), you can record a picture clearly, preventing the picture from going out of focus under bright conditions. When ND ON flashes on the LCD screen or in the viewfinder The ND filter is necessary. Press ND FILTER [...]

50 Shooting with the zebra pattern You can set the camcorder to display a zebra pattern (diagonal stripes) in the portion of the picture on the LCD screen or in the viewfinder with a subject whose brightness exceeds a certain level. The portion of the picture where zebra pattern appears is an area of high brightness and overexposure. You can check [...]

51 Advanced operations Releasing the Steady Shot function When the Steady Shot function is working, the camcorder compensates for camera-shake. You can release the Steady Shot function when you do not need to use it. The indicator appears on the LCD screen or in the viewfinder. Do not use the Steady Shot function when shooting a stationary object w[...]

52 Adjusting AE shift ( 1 ) Set the POWER switch to CAMERA. ( 2 ) Press MENU to display the menu. ( 3 ) Turn the control dial to select , then press the dial. ( 4 ) Turn the control dial to select AE SHIFT, then press the dial. ( 5 ) Turn the control dial to adjust brightness, then press the dial. Darker picture ˜ Brighter picture ( 6 ) Press MENU[...]

53 Advanced operations Shooting with manual adjustment Adjusting gain shift ( 1 ) Set the POWER switch to CAMERA. ( 2 ) Press MENU to display the menu. ( 3 ) Turn the control dial to select , then press the dial. ( 4 ) Turn the control dial to select GAIN SHIFT, then press the dial. ( 5 ) Turn the control dial to select –3dB, then press the dial.[...]

54 You can select from five PROGRAM AE (Auto Exposure) modes to suit your shooting situation, referring to the following. Selecting the best mode Select a proper PROGRAM AE mode referring to the following description. A: Aperture priority mode Selecting the aperture to determine the desired depth of field. Gain and the shutter speed are automatical[...]

55 Advanced operations Using the PROGRAM AE function Using the PROGRAM AE function (1) Set AUTO LOCK selector to the center (auto lock release) position while the camcorder is in Standby or Recording mode. ( 2 ) Press PROGRAM AE. ( 3 ) Turn the control dial so that the symbol of the desired PROGRAM AE mode matches the indicator on the LCD screen or[...]

56 About the depth of field The depth of field is the in-focus range, measured from the distance behind a subject to the distance in front. The depth of field can vary with the iris (F value) and the focal length. Lowering the F value (large iris) reduces the depth of field. Raising the F value (small iris) provides a larger depth of field. Zooming[...]

57 Advanced operations Focusing manually When to use manual focus In the following cases you should obtain better results by adjusting the focus manually. • Insufficient light [a] • Subjects with little contrast — walls, sky, etc. [b] • Too much brightness behind the subject [c] • Horizontal stripes [d] • Subjects through frosted glass [...]

58 Focusing manually Adjusting focus manually When focusing manually, first focus in telephoto before recording, and then reset the shot length. ( 1 ) Slide FOCUS down to MANUAL. The f indicator appears on the LCD screen or in the viewfinder. ( 2 ) Turn the focus ring to focus on the subject. To focus in infinity Slide FOCUS to INFINITY. indicator [...]

59 Advanced operations You can make a time-lapse recording by setting the camcorder to automatically record and standby sequentially. You can achieve an excellent recording for flowering, emergence, etc., with this function. ( 1 ) Set the POWER switch to CAMERA. ( 2 ) Press MENU to display the menu. ( 3 ) Turn the control dial to select , then pres[...]

60 To cancel the interval recording • Set INT.REC to OFF in the menu system. • Set the POWER switch to OFF, VTR or MEMORY. To stop the interval recording momentarily and perform normal recording Press START/STOP. You can perform the normal recording only once. To cancel the normal recording, press START/STOP again. During the interval recording[...]

61 Advanced operations You can make a recording with a stop-motion animated effect using cut recording. To create this effect, alternately move the subject a little and make a cut recording. We recommend you to use a tripod, and to operate the camcorder using the Remote Commander in steps 7 and 8. ( 1 ) Set the POWER switch to CAMERA. ( 2 ) Press M[...]

62 To cancel the cut recording • Set FRAME REC to OFF in the menu system. • Set the POWER switch to OFF, VTR, or MEMORY. Notes on cut recording • The last recorded cut is longer than other cuts. • The proper remaining tape time is not indicated if you use this function continuously. Cut recording[...]

63 Advanced operations Connecting the exter nal micr ophone with the XLR connector When using the ECM-670 external microphone (not supplied), attach the CAC-12 microphone holder (not supplied) and supplied XLR adaptor. ( 1 ) Attach the XLR adaptor to the accessory shoe on the camcorder and tighten the screw of the XLR adaptor. ( 2 ) Attach the micr[...]

64 Attaching the supplied wide conversion lens Hold the camcorder with its lens pointing upward. Align the groove on the wide conversion lens with the protruding part on the camcorder lens, then turn the ring in the direction of the arrow. Attaching the wide conversion lens hood Align the protruding part on the wide conversion lens hood with the gr[...]

65 Advanced operations Superimposing a title If you use a tape with cassette memory, you can superimpose the titles while recording or after recording. When you play back the tape, the title is displayed for five seconds from the point where you superimposed it. You can select from eight preset titles and two original (CUSTOM TITLE) to superimpose [...]

66 Superimposing a title Notes on superimposing a title • If you have not given any custom title, “– – – – ...” appears on the display. • The FADER function works while the title is displayed, however, the title does not fade. • If you display the menu or title menu while superimposing a title, the title is not recorded while the [...]

67 Advanced operations Erasing a title ( 1 ) Press MENU to display the menu. ( 2 ) Turn the control dial to select , then press the dial. ( 3 ) Turn the control dial to select TITLEERASE, then press the dial. ( 4 ) Turn the control dial to select the title you want to erase, then press the dial. ( 5 ) Make sure the title is the one you want to eras[...]

68 If you use a tape with cassette memory, you can make up to two titles and store them in the camcorder. We recommend you to set the POWER switch to VTR or eject the cassette before you begin. Your title can have up to 20 characters. ( 1 ) Press TITLE to display the title menu. ( 2 ) Turn the control dial to select , then press the dial. ( 3 ) Tur[...]

69 Advanced operations Making a custom title To edit a title you have stored In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to edit, then change the title. If you take 5 minutes or longer to enter characters while a cassette is in the camcorder The power goes off automatically. Characters you have entered remain. Set the PO[...]

70 Labeling a cassette If you use a tape with cassette memory, you can label a cassette. The label can consist of up to 10 characters and is stored in cassette memory. When you insert the labeled cassette and turn the power on, the label is displayed on the LCD screen, in the viewfinder, or on the TV screen. ( 1 ) Insert the cassette you want to la[...]

71 Advanced operations Labeling a cassette To erase a character In step 6 turn the control dial to select [ M ], then press the dial. The last character is erased. To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. If the mark appears in step 5 The cassette memory is full. If [...]

72 Connect the camcorder to your TV or VCR to watch the playback picture on the TV screen. When monitoring the playback picture by connecting the camcorder to your TV, we recommend you to use house current (mains) for the power source. Connecting directly to a TV or VCR with Audio/Video input jacks Open the jack cover and connect the camcorder to t[...]

73 Advanced operations V iewing the picture with the pictur e effect You can play back recorded images with the picture effect. The available picture effects are NEG. ART, SEPIA, B&W and SOLARIZE. During playback, press PICTURE EFFECT. See page 40 for details on the picture effect. To return to normal mode Press PICTURE EFFECT so that the indic[...]

74 V iewing the picture with the digital ef fect You can play back recorded images with the digital effect. The available digital effects are STILL, FLASH, LUMI. and TRAIL. ( 1 ) During playback, press DIGITAL EFFECT. ( 2 ) Turn the control dial to select the desired digital effect mode. ( 3 ) Press the control dial. The digital effect indicator li[...]

75 Advanced operations Sear ching the boundaries of recor ded tape with date – date sear ch You can search for the boundaries of recorded tape with date – Date Search function. To search the beginning of the specific date and play back from the point, there are two ways: • Using cassette memory, you can select the date displayed on the LCD sc[...]

76 Searching the boundaries of recorded tape with date – date search Searching for the date without using cassette memory If you use the tape without cassette memory, skip steps 3 and 4. ( 1 ) Set the POWER switch to VTR. ( 2 ) Press MENU to display the menu. ( 3 ) Turn the control dial to select CM SEARCH in , then press the dial. ( 4 ) Turn the[...]

77 Advanced operations Sear ching the boundaries of recor ded tape with title – title sear ch You can search for the boundaries of recorded tape with title – Title Search function. If you use a tape with cassette memory, you can select the title displayed on the LCD screen. You can only operate with the Remote Commander. Searching for the title[...]

78 Sear ching for a photo – photo search/photo scan You can search for the recorded still picture – Photo Search function. There are two modes in Photo Search: • Using cassette memory, you can select the recorded date which is displayed on the LCD screen. • Without using cassette memory. You can also search for still pictures one after anot[...]

79 Advanced operations Searching for a photo – photo search/photo scan To stop searching Press p . Note When you play back a tape which has a blank portion in the between of the recorded portions, the photo search function may not work correctly. Searching for a photo without using cassette memory – photo search If you use a tape without casset[...]

80 Scanning photo – photo scan You can use this function whether the tape has cassette memory or not. ( 1 ) Set the POWER switch to VTR. ( 2 ) Press SEARCH MODE on the Remote Commander repeatedly until the photo scan indicator displayed on the LCD screen. ( 3 ) Press = or + . Each photo is displayed for about 5 seconds automatically. To stop scan[...]

81 Advanced operations DATA CODE O CT 26 1999 1 2:0 5:5 6 A M AUTO 6 0 AWB F11 0 dB 26 10 1999 1 2:0 5:5 6 AUTO 6 0 AWB F11 0 dB You can display recording data (date/time or various settings when recorded) on the LCD screen or in the viewfinder during playback (Data Code). The Data Code is also displayed on the TV. Press DATA CODE during playback. [...]

82 (not supplied) Signal flow Editing onto another tape You can create your own video program by editing with any other DVCAM, DV, mini DV, h 8 mm, H Hi8, j VHS, k S-VHS,  VHSC, K S-VHSC, l Betamax or ¬ ED Betamax VCR that has audio/video inputs. You can edit with little deterioration of picture and sound quality when using the i.LINK cable (DV[...]

83 Advanced operations Using the i.LINK cable (DV connecting cable) Simply connect the VMC-IL4415/IL4435/2DV/4DV i.LINK cable (DV connecting cable) to DV IN/OUT and to DV IN/OUT of the DV products. With digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing. Notes on editing when using the i.[...]

84 Editing partially on a mini DVCAM tape – DV synchr o-editing By simply selecting the scenes to edit, you can duplicate the desired portion on a tape, using other equipment connected with an i.LINK cable (DV connecting cable). The scenes can be selected by frame. Since the camcorder exchanges digital signals, you can edit with little audio and [...]

85 Advanced operations Notes • If you use other than Sony DVCAM equipment, you cannot perform DV synchro-editing. • You cannot set DV EDITING IN or OUT on a blank portion of the tape. Errors in duplicating If you connect this camcorder to Sony equipment with DV jack, the range of errors is within +/– 5 frames. The range may become wider in th[...]

86 You can record a tape from another VCR or a TV program from a TV that has audio/video outputs. Connect the camcorder to the VCR or TV. Recording quality by analog input, however, is not satisfying for professional use. You can record only from a PAL system-based TV when you use this function (DSR- PD100AP only). ( 1 ) Set the POWER switch to VTR[...]

87 Advanced operations You can record an audio sound to add to the original sound on a tape by connecting audio equipment or a microphone. If you connect the audio equipment, you can add sound to your recorded tape by specifying the starting and ending points. The original sound will not be erased. You can only operate with the Remote Commander. Co[...]

88 LINE OUT LR AUDIO L AUDIO R Ç : Signal flow Audio equipment A/V connecting cable AUDIO/ VIDEO Do not connect the video (yellow) plug. Audio dubbing Dubbing with the AUDIO/VIDEO jack Note The picture is not output from the AUDIO/VIDEO jack. Check the recorded picture on the LCD screen or in the viewfinder, as well as check the recorded sound by [...]

89 Advanced operations Audio dubbing To play back the new recorded sound Adjust the balance between the original sound (ST1) and the new sound (ST2) by selecting AUDIO MIX in the menu system. Five minutes after when you disconnect the power source or remove the battery pack, the setting of AUDIO MIX returns to the original sound (ST1) only. The fac[...]

90 Memory card slot operations Using the memory card slot – intr oduction This camcorder is equipped with a memory card slot that conforms to ATA specification of PC Card standard. You can record still images to “Memory Stick”s using the supplied PC card adaptor or to PC cards (not supplied). You can exchange image data with other equipment s[...]

91 Memory card slot operations Data file names of image Example: MVC00001.jpg On file format (JPEG) This unit compresses image data in JPEG format (extension .jpg) and simultaneously records thumbnail data for the index screen. The index screen data is varies only on this unit. The types of PC cards you can use Use TYPE II PC cards that conform to [...]

92 Inserting a “Memory Stick” into PC card adaptor Insert a “Memory Stick” with its connector side facing down. Before inserting, check that the write protect switch is not set to LOCK position for recording a still picture. To eject the “Memory Stick” Press the eject button. Inserting the PC card adaptor or PC card With the upper side [...]

93 Memory card slot operations Using the memory card slot – introduction When the PC card adaptor or PC card does not come out Remove the battery before ejecting the PC card adaptor/PC card. Connecting the PC card/parallel port adaptor (not supplied) with your computer To display images recorded on the “Memory Stick” or PC card on the compute[...]

94 Selecting the image quality mode You can select one of three image quality modes in still picture recording. If you do not make any selection, the unit automatically records in SUPER FINE mode. ( 1 ) Set the POWER switch to MEMORY. Make sure that the lock knob is set to the right (unlock) position. ( 2 ) Press MENU to display the menu. ( 3 ) Tur[...]

95 Memory card slot operations Using the memory card slot – introduction The difference in image quality mode A recorded image is compressed in JPEG format before stored into memory. The memory capacity allotted to each image varies depending on the selected quality mode. Details are shown in the table below. (The number of pixel is 640 x 480, re[...]

96 Using the memory card slot – introduction Formatting (initializing) a “Memory Stick” or a PC card ( 1 ) When you format a “Memory Stick,” insert a PC card adaptor (with a “Memory Stick” inside) into the memory card slot. When you format a PC card, insert the card into the memory card slot. ( 2 ) Set the POWER switch to MEMORY. Make[...]

97 Memory card slot operations Notes on formatting • Formatting erases all information on the “Memory Stick” or PC card, including the protected image data. Check the contents of the “Memory Stick” or PC card before formatting. • Be sure that the battery is fully charged when formatting a “Memory Stick” or PC card. Formatting takes [...]

98 Recor ding an image from a mini DVCAM tape as a still image This camcorder can read moving picture data recorded on a mini DVCAM tape and record it as a still image on a “Memory Stick” or a PC card. The unit can also take in moving picture data through the input connector and record it as a still image on a “Memory Stick” or a PC card. B[...]

99 Memory card slot operations Recording a still image from a mini DVCAM tape right after turning on the power Saving the data may take a little more time than usual. This is not a malfunction. Sound recorded on a mini DVCAM tape You cannot record the audio from a mini DVCAM tape. About titles recorded on the mini DVCAM tape You cannot record title[...]

100 Copying still images from a mini DVCAM tape – photo save Using the search function, you can automatically take in only the still images from mini DVCAM tapes and record them on a “Memory Stick” or a PC card in sequence. Before operation • Insert a recorded mini DVCAM tape and rewind the tape. •Insert the PC card adaptor (with a “Mem[...]

101 Memory card slot operations When the access lamp is flashing Never shake or strike the unit. As well do not turn the power off, eject a PC card adaptor/PC card or remove the battery pack. Otherwise, the image data breakdown may occur. To record all the images recorded on the mini DVCAM tape Rewind the tape all the way and start copying. When yo[...]

102 Recor ding still images on “Memory Stick”s or PC car ds – memory photo recor ding You can record still images with all the pixels (progressive) on a “Memory Stick” or an optional PC card. Before operation Insert the PC card adaptor (with a “Memory Stick” inside) or a PC card to the unit. ( 1 ) Set the POWER switch to MEMORY. Make [...]

103 Memory card slot operations Recording images continuously You can shoot continuously by selecting one of two modes described below. Continuous mode [a] You can record from 2 to 4 pictures continuously. Multi screen mode [b] You can record 9 still pictures continuously on a single page. Note on the video flash light You cannot use the video flas[...]

104 Settings of continuous shooting Setting Meaning (indicator on the screen) OFF The unit shoots one image at a time. (no indicator) ON The unit shoots 2 to 4 still images at about 0.8 sec intervals. ( ) MULTI SCRN The unit shoots 9 still images at about 0.3 sec intervals and displays the images on a single page divided into 9 boxes. ( ) The numbe[...]

105 Memory card slot operations V iewing a still picture – memory photo playback You can play back still images recorded on a “Memory Stick” or PC card. You can also play back 6 images at a time by selecting the index screen. Before operation Insert the PC card adaptor (with a “Memory Stick” inside) or a PC card to the unit. ( 1 ) Set the[...]

106 Screen indicators during still image playback Playing back 6 recorded images at a time (index screen) You can play back 6 recorded images at a time. This function is especially useful when searching for a particular image. Press MEMORY INDEX. A red ” mark appears above the image that is displayed before changing to index screen mode. • To d[...]

107 Memory card slot operations Viewing a still picture – memory photo playback Note When displaying the index screen, the number appears above each image. This indicates the recording order on the “Memory Stick” or PC card. These numbers are different from the data file names. The image quality mode indicator The indicator may show a differe[...]

108 Preventing accidental erasur e – PROTECT To prevent accidental erasure of important images, you can protect selected images. Before operation Insert the PC card adaptor (with a “Memory Stick” inside) or a PC card to the unit. ( 1 ) Display the image you want to protect. ( 2 ) Press MENU to display the menu. ( 3 ) Turn the control dial to [...]

109 Memory card slot operations Deleting selected image Before operation Insert the PC card adaptor (with a “Memory Stick” inside) or a PC card to the unit. ( 1 ) Display the image you want to erase. ( 2 ) Press MEMORY DELETE. “DELETE?” appears on the LCD screen. ( 3 ) Press MEMORY DELETE again. The selected image is deleted. To cancel dele[...]

110 Erasing all the images You can delete all the unprotected images in a “Memory Stick” or PC card. Before operation Insert the PC card adaptor (with a “Memory Stick” inside) or a PC card to the unit. ( 1 ) Set the POWER switch to MEMORY. Make sure that the lock knob is set to the right (unlock) position. ( 2 ) Press MENU to display the me[...]

111 Memory card slot operations To cancel deleting all the images on the “Memory Stick” or PC card Select RETURN in step 4, then press the control dial. While “DELETING” appears Do not turn the POWER switch or press any buttons. Deleting images[...]

112 Copying the image recor ded with the memory card slot to mini DVCAM tapes You can copy still images or titles recorded with the memory card slot and record them to a mini DVCAM tape. Before operation • Insert a mini DVCAM tape for recording. • Insert the PC card adaptor (with a “Memory Stick” inside) or a PC card to the unit. ( 1 ) Set [...]

113 Memory card slot operations Note on the index screen You cannot record the index screen. If you press the EDITSEARCH buttons during pause mode Memory playback stops. If you press the DISPLAY button in Standby or Recording mode You can see memory playback and the file name indicators in addition to the indicators pertinent to mini DVCAM tapes, s[...]

114 Playing back images in a continuous loop – SLIDE SHOW You can automatically play back images in sequence. This function is useful especially when checking the recorded images or during a presentation. Before operation Insert the PC card adaptor (with a “Memory Stick” inside) or a PC card to the unit. ( 1 ) Set the POWER switch to MEMORY. [...]

115 Memory card slot operations Note on the slide show You cannot make copy of the slide show on a mini DVCAM tape. If you change the “Memory Stick” or PC card during operation The slide show does not operate. If you change the “Memory Stick” or PC card, be sure to follow the steps again from the beginning. Playing back images in a continuo[...]

116 DVCAM format is developed as a more reliable and higher end format than consumer DV format. Here explained are differences, compatibility, and limitations on editing about DVCAM and DV formats. Differences between DVCAM and DV formats Item DVCAM DV Track pitch 15 µ m 10 µ m Audio sampling frequency 12 bit: 32 kHz 12 bit: 32 kHz 16 bit: 48 kHz[...]

117 Additional information Compatibility on editing using DV connectors When this digital camcorder is connected to other mini DVCAM or mini DV video equipment using DV connectors, the recording format of edited tapes is defined according to recorder’s format as described below. Source tape Player’s format Recorder’s format Recording format D[...]

118 Usable cassettes and playback modes Selecting cassette types You can use the mini DVCAM cassette and mini DV cassette. You cannot use any other DV, h 8 mm, H Hi8, j VHS, k S-VHS,  VHSC, K S-VHSC, l Betamax or ¬ ED Betamax cassette. We recommend mini DVCAM cassette with cassette memory. There are two types of mini DVCAM cassettes: with casse[...]

119 Additional information Charging the vanadium-lithium battery in the camcorder Your camcorder is supplied with a vanadium-lithium battery installed so as to retain the date and time, etc., regardless of the setting of the POWER switch. The vanadium-lithium battery is always charged as long as you are using the camcorder. The battery, however, wi[...]

120 Resetting the date and time 1999JA N 1 12 00 A M 1999JA N 1 12 00 A M 1999JU L 1 12 00 A M 1999JU L 4 12 00 A M 1999JU L 4 10 00 A M 1999JU L 4 10 30 A M 6 5 1 2,7 3 POWER OFF CAMERA MEMORY VTR MENU SETUP M ENU CLO CK S E T LT R S I Z E [M E N U ] : E N D 4 SETUP M ENU CLO CK SET JAN 1 1 9 9 9 L TR S I ZE 1 2:0 0:0 0A M RET UR N [M E N U ] : E [...]

121 Additional information To correct the date and time setting Repeat steps 2 to 5. If you do not set the date and time “--.--.--” is recorded on the tape and “80.1.1” on the “Memory Stick” or PC card The year indicator changes as follows: Note on the time indicator The internal clock of this camcorder operates on a 12-hour cycle (DSR-[...]

122 Tips for using the battery pack This section shows you how you can get the most out of your battery pack. Preparing the battery pack Always carry additional batteries Have sufficient battery pack power to do 2 to 3 times as much recording as you have planned. Battery life is shorter in a cold environment Battery efficiency is decreased, and the[...]

123 Additional information Tips for using the battery pack The life of the battery pack If the battery indicator flashes rapidly just after turning on the camcorder with a fully charged battery pack, the battery pack should be replaced with a new fully charged one. Charging temperature You should charge batteries at temperatures from 10°C to 30°C[...]

124 Tips for using the battery pack Why the remaining battery indication does not match the continuous recording time in the operating instruction The recording time is affected by the environmental temperature and conditions. The recording time becomes very short in a cold environment. The continuous recording time in the operating instruction is [...]

125 Additional information Moisture condensation If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, on the lens, on the head, or on the floppy disk. In this condition, the tape may stick to the head drum and be damaged or the camcorder may not operate corre[...]

126 Maintenance information and precautions Note If the PDVM-12CL cleaning cassette (not supplied) is not available in your area, consult your nearest Sony dealer. Precautions Camcorder operation • Operate the camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor). • Should any solid object or liquid get inside the casing, unplug the cam[...]

127 Additional information AC power adaptor Charging • Use only an “InfoLITHIUM” type battery pack. • Place the battery pack on a flat surface without vibration during charging. • The battery pack will get hot during charging. This is normal. Others • Unplug the unit from the wall outlet when not in use for a long time. To disconnect th[...]

128 Each country or area has its own electric and TV color systems. Before using your camcorder abroad, check the following points. Power sources You can use your camcorder in any country or area with the supplied AC power adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a] , if necessary, depending on the d[...]

129 Additional information T r ouble check Continued to the next page Cause and/or corrective actions • The battery pack is not installed. m Install the battery pack. (p. 8) • The battery is dead. m Use a charged battery pack. (p. 9) • The AC power adaptor is not connected to a wall outlet (mains). m Connect the AC power adaptor to a wall out[...]

130 Trouble check Cause and/or corrective actions • The tape has a blank portion in the middle. • The POWER switch is not set to VTR. m Set it to VTR. (p. 23) • The tape has run out. m Rewind the tape or use a new one. (p. 23) • The volume is turned to the minimum. m Open the LCD panel and press VOLUME +. (p. 23) • AUDIO MIX is set to ST2[...]

131 Additional information Cause and/or corrective actions • The viewfinder lens is not adjusted. m Adjust the viewfinder lens. (p. 14) • The contrast between the subject and background is too high. The camcorder is not malfunctioning. m Change locations. • The video heads may be dirty. m Clean the heads using the Sony PDVM-12CL (not supplied[...]

132 Trouble check Cause and/or corrective actions • PROG. SCAN is set to ON in the menu system, or the POWER switch is set to MEMORY. This is caused by progressive scanning (display with all the pixels) and is not a malfunction. • The Ò REMAIN in the menu system is set to AUTO. m If the remaining tape indicator is always displayed, set it to O[...]

133 Additional information Trouble check Cause and/or corrective actions • Disconnect the power cord (mains lead) of the AC power adaptor or remove the battery pack, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, open the LCD panel and press the RESET button beside the speaker using a sharp-pointed obj[...]

134 Cause and/or corrective actions • The battery other than “InfoLITHIUM” is used. m Use the “InfoLITHIUM” battery.(p. 123) • Moisture condensation has occurred. m Remove the cassette and leave the camcorder for at least 1 hour. (p. 125) • The video heads are dirty. m Clean the heads using the Sony PDVM-12CL cleaning cassette (not su[...]

135 Additional information Specifications Digital Camcorder System Video recording system Two rotary heads, Helical scanning system Audio recording system Rotary heads, PCM system Quantization: Fs 32kHz (12bits, stereo 1, stereo 2), Fs 48kHz (16bits, stereo) Video signal DSR-PD100A: NTSC color, EIA standards DSR-PD100AP: PAL color, CCIR standards U[...]

136 Identifying the parts 8 Viewfinder lens adjustment lever (p. 14) 9 PHOTO button (p. 33) 0 BATT (battery) RELEASE button (p. 11) !¡ SHUTTER SPEED button (p. 45) !™ WHT BAL (white balance) button (p. 46) !£ PROGRAM AE button (p. 55) !¢ EXPOSURE button (p. 44) !∞ Memory card slot (p. 90) 3 2 1 8 !º !™ !£ !¢ !∞ !¡ 9 4 7 5 6 1 EDITSEA[...]

137 Additional information Identifying the parts !§ Tape transport buttons (p. 23) π STOP (stop) 0 REW (rewind) · PLAY (playback) ) FF (fast-forward) P PAUSE (pause) r REC (record) !¶ Focus ring (p. 58) !• Remote sensor (p. 143) !ª Built-in microphone @¡ @™ @£ @¢ @∞ @ º !¶ !• !ª !§ @º Power zoom lever (p. 15) @¡ TC RESET butto[...]

138 Identifying the parts @§ LCD Screen (p. 16) @¶ LCD BRIGHT buttons (p. 16, 23) @• VOLUME buttons (p. 23) @ª RESET button (p. 133) #º DATA CODE button (p. 81) #¡ Speaker #™ START/STOP button (p. 13) #£ POWER switch (p. 13, 23) #¢ ZEBRA selector (p. 50) #∞ END SEARCH button (p. 22, 25) @§ @¶ @• @ª #º #¡ #£ #¢ #∞ #§ #™ PI[...]

139 Additional information $§ $¶ $• %™ %¡ %º $ª %¢ %£ Note on the intelligent accessory shoe Supplies power to optional accessories such as a video light or microphone. The intelligent accessory shoe is linked to the POWER switch, allowing you to turn on and off the power supplied by the shoe. Refer to the operating instruction of the ac[...]

140 1 LEVEL selector (p. 63) 2 +48V switch (p. 63) 3 PUSH button (p. 63) %∞ LANC l control jack l stands for Local Application Control Bus System. The l control jack is used for controlling the tape transport of video equipment and peripherals connected to it. This jack has the same function as the jack indicated as CONTROL L or REMOTE. %§ DV IN[...]

141 Additional information PC card adaptor and “Memory Stick” Identifying the parts 1 Connector (p. 90) 2 Eject button (p. 92) 3 “Memory Stick” slot (p. 90) 2 1 3 4 6 5 4 Terminal (p. 90) 5 Write-protect switch (p. 90) 6 Label space (p. 90)[...]

142 1 PHOTO button (p. 33) 2 DISPLAY button (p. 23) 3 Memory control buttons (p. 106) 4 SEARCH MODE button (p. 75, 77, 78) 5 Tape transport buttons (p. 23) 6 REC button (p. 86)/ MARK button (p. 84) 7 AUDIO DUB button (p. 88) Identifying the parts 6 7 8 9 5 4 3 2 1 !£ !™ !¡ !º Remote Commander The buttons that have the same name on the Remote C[...]

143 Additional information 1 2 3 Identifying the parts Note on battery life The batteries for the Remote Commander last about 6 months under normal operation. When the batteries become weak or dead, the Remote Commander does not work. To avoid damage from possible battery leakage Remove the batteries when you will not use the Remote Commander for a[...]

144 Identifying the parts Operation indicators !∞ Manual focus/Infinity indicator (p. 58) !§ SP mode indicator (p. 24) !¶ Standby/Recording indicator (p. 13) /Tape transport mode indicator (p. 23) /Image quality mode indicator (p. 94) !• Warning indicators (p. 146) !ª Time code indicator (p. 14) /Self diagnosis indicator (p. 134) /Image numb[...]

145 Additional information 1 Remaining time in minutes indicator (p. 9) / Tape counter (p. 14) / Memory counter (p. 106) / Time code indicator (p. 14) Identifying the parts 1 3 2 Display window 2 FULL charge indicator (p. 9) 3 Remaining battery indicator (p. 9, 122)[...]

146 If indicators flash on the LCD screen or in the viewfinder or warning messages appear on the screen, check the following: : You can hear the beep sound when BEEP is set to MELODY or NORMAL in the menu system. W ar ning indicators 1 3 0 min 4 5 6 7 8 9 C : 21: 10 40min 40min 1 The battery is weak or dead. Slow flashing: The battery is weak. Fast[...]

147 Additional information 0 The battery is not the “InfoLITHIUM” type. !¡ The tape has no cassette memory. (p. 5) !™ The file cannot be read properly. !£ The image data file is protected. The flashing is slow. !¢ The tape has no memory left or cannot use the memory. !∞ The protect tab is set to prevent accidental erasure. Warning indica[...]

148 M, N Manual adjustment ................... 44 Manual focus .............................. 57 Memory card .............................. 90 Memory card slot ....................... 90 “Memory Stick” ......................... 90 Menu system .............................. 28 Microphone level ....................... 48 Mirror mode .............[...]