Sony PDW-R1 manuale d’uso

PROFESSIONAL DISC RECORDER PD W -R1 OPERA TION MANUAL [English] 1st Edition (Revised 1 )[...]

2 • Read t hese i nstructio ns. • Keep t hese ins tructio ns. • Heed a ll warni ngs. • Fol low a ll inst ructi ons . • Do not use this appara tus near w ater. • Clean only with dry cloth. • Do not block any ven til ation ope nings . Install in accordan ce with the manuf acturer ’s instruc tions . • Do not insta ll nea r any h eat [...]

3 If you ha ve qu estion s on th e use of the abo ve Pow er Cord/ Applianc e Conne ctor/Plu g, ple ase c onsult a q ualifi ed se rvice personne l. When ins talli ng the i nstal lation spac e must be secu red in consid eration of the ventilati on and servi ce operation . • Do not block th e vent ilatio n slots a t the le ft sid e and righ t side p[...]

4 For the c ustomers in th e USA and Canada RECYCLING LITHIUM-ION BATTERIES For the c ustomers in Europe This prod uct with t he CE m arking co mplie s wit h both the EM C Directive (89/336 /EEC) and the Lo w Voltage Dir ectiv e (73/23/ EEC) issue d by th e Comm ission of the European Commu nity. Compl iance w ith the se direc tives implies confo r[...]

5 Tabl e of Co ntents Table of Content s Before Using the Unit ............. ......... ........ 7 Setting the Line Mode ................................ 7 Chapter 1 Overvie w 1-1 Features ....... .............. ......... ......... ........ 9 Chapter 2 Names and Functions of Parts 2-1 Configurat ion ............ ......... ......... ...... 11 2-2 Con[...]

6 Table of Conten ts 6-1-3 Assigning User-Defined Clip Titles 75 6-1-4 Assigning User-Defined Clip and Clip List Names ....................................... 76 6-2 File Acc ess Mode File O perations ... 78 6-2-1 Making FAM Connections .............. 78 6-2-2 Operating on Files ........................... 79 6-2-3 Exiting File Operations .........[...]

7 Before Using the Unit Before Using the Unit Setting the Line Mode This unit is ship ped with t he line mode still unset . Therefore y ou need to set the line mod e before using the unit. (The uni t cannot be used unless the line mode is set. ) Once it is set, th e line mo de is re tained e ven when the unit is powered off. Setting procedure Use t[...]

8 Before Using the Unit a) Underl ined values a re the fac tory defaul ts. • The followi ng video pr ocessing parameters Item No. Item name Settings a) 525 (U)/525 (J) 625 Basic menu 002 CHARACTER H-POSITION 00 to 0A to 2A 0 0 to 09 to 29 003 CHARA CTER V -POSITION 00 to 2E to 38 00 to 37 to 43 Extended menu 601 VIT C POSITION SEL-1 12H to 16H to[...]

9 1-1 Feat ures Chapter 1 Overview 1-1 Features The PDW-R1 i s a conven ient, compact, and light weight optical disc recorde r. It allows yo u to record to opti cal discs, play b ack optical d iscs, and rec ord audio and vi deo data files transferred over the S400 (i.LINK 1) ) con nector and (network ) conne ctor. It is ideal f or fiel d applicatio[...]

Chapter 1 Ov ervie w 10 1-1 Feat ures 1) A c lip is crea ted ev ery ti me rec ording is stop ped. •Vide o and aud io data a re alwa ys recor ded in emp ty sect ions of the disc. Reco rdin g be gin s i nst antl y, e ven afte r p layb ack, wit hou t o verw ri ting existin g video on the di sc. •Record ing is done in clip units, whi ch makes it si[...]

11 2-1 Configu ration Chapter 2 Names and Functions of Parts 2-1 Configura tion Operation of the PDW-R 1 uses the par ts shown in the following fi gure. S D I S D I Press here to raise the cover. Security slot You can fit a commercially av ailable securi ty cable into this slot. a) AC power switch (rear panel) Press " to power on; press a to p[...]

Chapter 2 Names and Func tions of P arts 12 2-2 Control Panel 2-2 Control Pane l a ACCESS indicator This lights whe n the disc is acc essed and when a file is opened by a F AM or F TP connect ions (s ee page 72) . If the on/ standby swit ch is set to the 1 pos ition while t his indicator is li t, access to the d isc is complete d before the unit sw[...]

Chap ter 2 Na mes a nd F uncti ons of Par ts 13 2-2 Control Panel 1 Time data se ttings section a INT/EXT/RP188 (int ernal/ external/ RP188 selector) switch Befor e rec ord ing t ime c ode, s elec t the type o f ti me cod e with th is swi tch. INT: Use time code ge nerate d internal ly by th is unit . EXT: Use time code input from an external sourc[...]

Chapter 2 Names and Func tions of P arts 14 2-2 Control Panel each clip or sub -clip appear. Pr ess once more to turn t he button off, and return to a whole- screen di splay. To display t he thumbnai ls of essen ce mark frames (fr ames with an essence mark a ttached), ho ld down the SHIFT button, and press th is but ton. The essen ce mark se lectio[...]

Chap ter 2 Na mes a nd F uncti ons of Par ts 15 2-2 Control Panel speed vari es in the range ±1 times nor mal speed, acc ording to the rotati on rate of the jog dial. There are n o detents. Normally , you press the JOG butt on befor e turning the jog dial, but it is a lso possible to make a se tting to e nable jog mode directly b y turning the dia[...]

Chapter 2 Names and Func tions of P arts 16 2-2 Control Panel 5 Recording and pla ybac k contr ol section a PREV (previo us) button Press this b utton, turning it o n, to show the first frame of the current clip. While th e first frame of a clip is sho wn, pressing thi s butt on jumps to t he beginni ng of th e previous clip. This but ton is also u[...]

Chap ter 2 Na mes a nd F uncti ons of Par ts 17 2-3 LCD Panel 2-3 LCD Panel a Indicators on the back of the LCD panel There are two indica tors, as follows. OPERATION in dicator: Light s when the o n/standby switch on the con trol panel is in the on ( " ) positi on. ACCESS indicator: Lights whe n the disc is being accessed. If t he on/sta ndby[...]

Chapter 2 Names and Func tions of P arts 18 2-3 LCD Pane l e REC INHI (recording inhi bit) indica tor This light s in the following c ases. • When a di sc with rec ording inhi bited is loaded. • When ext ended menu it em 310 “ REC INHIBIT” is set to “on.” • The format of the recorded part of the d isc does not match the setti ngs of t[...]

Chap ter 2 Na mes a nd F uncti ons of Par ts 19 2-3 LCD Panel “BATT” a nd “E” flashi ng: Exhau sted ( charging require d). Operati on of the PDW- R1 stops. e Disc loaded ma rk This li ghts wh ile a d isc is loa ded in th e PDW -R1. It flas hes as the disc is i nserted, and while it is being eject ed. 2 A udio and video se ttings se ction a [...]

Chapter 2 Names and Func tions of P arts 20 2-3 LCD Pane l a) This app ears when a dis c is loaded , an d the for mat of a cl ip re cord ed on the disc is di fferent from the format spec ified by basi c menu item 031 or the sett ing of the “AUDIO CONFIG” - “DATA LENGTH” item in the mainte nance men u. b) 9PIN: When exten ded menu item 214 i[...]

Chap ter 2 Na mes a nd F uncti ons of Par ts 21 2-4 Conne ctors 2-4 Connec tors a PHONES jack and LEVEL kn ob The jack is a standard st ereo jack. C onnect stereo headphones wi th an i mpedance of 8 ohms, to monitor the audio during p layback. (Non-aud io signals are mut ed.) The channels monitored are selected by the AUDIO MONITOR SEL butto n. Adj[...]

Chapter 2 Names and Func tions of P arts 22 2-4 Conne ctors c REMOTE (remote control signa l) connector (D- sub 9 -pin) To control the PDW-R1 from a co ntroller or VTR supportin g the RS-422 A Sony 9-pin VT R protocol , connect the d evice to thi s connector. d REF VIDEO IN (reference video signal input) connect or (BNC type) Input a refer ence vid[...]

Chap ter 2 Na mes a nd F uncti ons of Par ts 23 2-4 Conne ctors To treat t he input and output sign als of these connectors as non-audio si gnals, set the maintenance menu it em “AUDIO CONFIG”-“NON- AUDIO INPUT” (recording) and extended menu item 823 “NON-AUDIO FLAG PB” (playback). See 7-3-2 “Exten ded Menu Opera tions ” (page 108 )[...]

Chapter 2 Names and Func tions of P arts 24 2-4 Conne ctors “AUDIO CONFIG”-“NON- AUDIO INPUT” (recording) and extended menu item 823 “NON-AUDIO FLAG PB” (playback). See 7-3-2 “Exten ded Menu Opera tions ” (page 108 ) for more information a bout ho w to make extend ed menu settings. See 7-4-2 “Mai ntenance Men u Operations ” (pag[...]

25 3-1 Conn ections and Setting s Chapter 3 Preparations 3-1 Connections an d Settings Note Product ion of some of the periph erals and relate d devic es described in t his chapt er has been di scontinued . For advi ce about choosin g devices, please cont act your Son y dealer or a Sony sales r epresent ative . 3-1-1 Connecting an External Monito r[...]

Chapter 3 Prepar ation s 26 3-1 Conne ctions an d Set tings 71. For informa tion about how to use the softw are, refer to the Help prov ided in the software. Using the ( network) connector (FTP connection) The following shows an example of an FTP (File Tran sfer Protoc ol) connecti on. Note To use PDZ-1 requi res the PDW-R1 IP add ress and other ne[...]

Chapter 3 Prepar ations 27 3-1 Conn ections and Setting s 3-1-3 Connecting to a Nonlinear Editing System You can send vi deo/audio si gnals (AV/C dat a) from thi s unit t o a nonli near edi ting system c onnecte d to th e S400 (i.LINK) conn ector. The following figure sho ws an example con nection. Notes • The S400 (i .LINK) connect or of this un[...]

Chapter 3 Prepar ation s 28 3-1 Conne ctions an d Set tings S D I PDW-R1 (i.LINK) DV OUT 1 S400 (i.LINK) 1 : i.LINK cable (not supplied) DSR-400/400P/4 50WS/450WSP settings REC TRIGGER switch : INT ONLY “REC FORMA T” on the VT R MODE page of the MAINTENANCE menu: DVCAM PDW-R1 setting s Remote control switch (see page 12) : RE MO TE VIDEO INPUT [...]

Chapter 3 Prepar ations 29 3-1 Conn ections and Setting s 3-1-5 Con nections f or Cut Editing By connecting t his unit t o a VTR (for example, M SW- M2000/M2000P or DSR-2000/2 000P) and an editing control uni t, you can make up a cut edi ting system. So me example conn ections are show n in the followin g. When making the conn ections, al so refer [...]

Chapter 3 Prepar ation s 30 3-1 Conne ctions an d Set tings When using the ed iting functions of the recorder REF VIDEO IN REMOTE DIGITAL AUDIO (AES/EBU) S400 IN DC OUT 12V 1/2 3/4 OUT 1/2 3/4 SDI IN OUT(SUPER) VIDEO IN OUT1 OUT2(SUPER) TC IN OUT AUDIO OUT 1/3 2/4 1/3 2/4 AUDIO IN REMO TE 1 OUT (9P) REMO TE PD W -R1 2 REF VIDEO IN REF . VIDEO INPUT[...]

Chapter 3 Prepar ations 31 3-1 Conn ections and Setting s 3-1-6 Using the RM-280 Editing Controller You can c onnec t an RM-2 80 Editi ng Contro ller to this unit and use it as an editor or as a remo te control ler. Using the RM-280 as an edit or You can perfo rm assemble and insert e diting by connec ting this u nit, a VTR, and an RM-280 E diting [...]

Chapter 3 Prepar ation s 32 3-1 Conne ctions an d Set tings recordin g from the R M-280 (when XDC AM mode is selected). RM-280 s ettings EDITOR/RE MOTE CONT ROL switch: REMO TE CONTROL Setup menu item 19 “FNC MODE”: XDCAM For info rmation abou t fun ction assi gnments t o PF keys in XDCAM mode, ref er to the Operation Ma nual for the RM - 280. [...]

Chapter 3 Prepar ations 33 3-2 Power Prepa rations 3-2 Power Preparations This unit can be po wered by a batt ery pack, DC power, or AC power. 3-2-1 Using A C P ower Connect an AC power sour ce (100 V to 240 V AC, 50/60 Hz) to the ~ AC IN con nector on the right side of the un it with an AC power cord (not sup plied, see page 1 33 ). 3-2-2 Using D [...]

34 3-3 Setup / 3-4 Sett ing the Date and Time Chapter 3 Prepar ation s 3-3 Setup The princi pal setup oper ations b efore op erating th is uni t can be carri ed out usi ng setup menus. The setup menus of this unit compri se a basic set up menu and an extended setup menu. Th e contents of these menus are as follows. Basi c setup me nu: • Item s re[...]

Chapter 3 Prepar ations 35 3-5 Supe rimposed Te xt Info rmation Note The time zone is reset t o the f actory defau lt when you execute the mai ntenance men u item “RESET ALL SETUP.” You will need to set it aga in. The date an d time are not reset. 3-5 Superimposed Text Informatio n The video signal output from the VID EO OUT 2 (SUPER ) connecto[...]

Chapter 3 Prepar ation s 36 3-5 Superimpose d Text Informat ion a Type of time d ata Note If the time data or u ser’s bit s cannot be read co rrectly, they will be displaye d with an aste risk. For exa mple, “T*R”, “U*R”, “T*R.” or “U*R.”. b Time code rea der drop frame mark ( for 525 line mode onl y) “.”: Indica tes drop fr a[...]

Chapter 3 Prepar ations 37 3-5 Supe rimposed Te xt Info rmation a) Read erro rs will occur if th e playba ck conditio n continue s to deteriorate . If a read erro r occurs, a “ Disc Err or!” alarm ap pears in the time data display, the pi cture freez es, and audio is mut ed. To displa y playback cond ition marks, set basic menu it em 012 “CON[...]

Chapter 3 Prepar ation s 38 3-6 Handl ing Discs 3-6 Handling Di scs 3-6- 1 Dis cs Us ed for Reco rding and Pla ybac k This disc recorder uses the follo wing disc for recording and playba ck: PFD2 3 Profession al Disc 1) (capaci ty 23.3 GB) 1) Professional Di sc is a tradema rk of Sony Cor poration. Note It is not po ssi ble t o use th e fo llow ing[...]

Chapter 3 Prepar ations 39 3-6 Handl ing Discs If mess age “H UMID!” appear s in the time dat a disp lay There is mo isture cond ensation in the unit. For the steps to take when the message appears, se e 8-2 “Condensat ion” (page 121). 3-6-5 Fo rmatti ng a Disc An unused di sc requi res no formatti ng operat ion. Th e disc is automa tically[...]

Chapter 3 Prepar ation s 40 3-6 Handl ing Discs The disc is e jected. After re moving the disc, y ou do not need to retur n the screw to its orig inal positi on. Normal o peration wi ll resume when the unit is powered o n again. 3 Close the rubber cover fi rmly. 3-6-7 Handling of Discs When Recor ding Does Not End Normally (Salv age Function) Recor[...]

Chapter 3 Prepar ations 41 3-6 Handl ing Discs To exit witho ut salva gin g Press th e RESET butt on. The state of section where recordi ng was interrupted is saved, but no salvage proc essing i s done. Sections whi ch were recorded normally can be p layed back, but no new recording can be done o n the di sc. (A quick f ormat can be done on t he di[...]

42 4-1 Recordin g Chapter 4 Recordin g/Playback 4-1 Recording This secti on describes vi deo and audio rec ording on t he unit. 4-1-1 Preparations f or Recordi ng Button/switch settings Before beginn ing recor ding, make any necessary b utton/ switch settings. For detail s of the set tings of the buttons/sw itches, see th e pages indi cated in p ar[...]

Chapter 4 Recording/ Pla ybac k 43 4-1 Recording T o set the video recor di ng format Use basic menu item 031 “RECORDING FORMAT” to select the video recording format fr om MPEG IMX 50 Mbps, MPEG I MX 40 Mbps, MPE G IMX 30 Mbps, a nd DVCAM. The factory d efault setting i s IMX50. For detail s of the basic menu operation s, see 7-2- 2 “Basic Me[...]

Chapter 4 Recordin g/Pla ybac k 44 4-1 Recordin g 4-1-2 Recording Time Code and User Bit V alues There are the foll owing four ways of reco rding t ime cod e: • Internal P reset mode, which recor ds the out put of the interna l time code genera tor, set before hand to an initia l value. The fol lowing run modes can be selected . - Free Run: Time [...]

Chapter 4 Recording/ Pla ybac k 45 4-1 Recording 1 Watchi ng the ind icators above th e time dat a display, press the CO UNT ER S EL butt on to selec t TC. 2 Press the HOLD button . The SHUTTLE but ton lights and t he first two di gits of the time c ode show n in the tim e data displa y start flashing. To set all digits to 0 Press th e RESET butt o[...]

Chapter 4 Recordin g/Pla ybac k 46 4-1 Recordin g T o record time code that f ollow s sequentially upon the la st recor ded time code You can record ti me code so tha t it is conti nuous from one clip to the next on the disc. Set the I NT/EXT/RP 188 switch t o INT and the PR ESET/ REGEN switch to RE GEN before hand. W hen this sett ing is in fo rce[...]

Chapter 4 Recording/ Pla ybac k 47 4-1 Recording To sy nchronize t o ti me code in put to the T C IN connector • Set the INT/EXT/RP1 88 switch to E XT and the PRESET /REGEN sw itch to REG EN. • Set extended menu ite m 629 “TC SELECT” to “tc.” To synchr onize to VITC in an i nput video si gnal • Set the INT/EXT/RP1 88 switch to E XT an[...]

Chapter 4 Recordin g/Pla ybac k 48 4-1 Recordin g To directly record SMPTE RP-188 LTC in an SDI signal Connect an SDI sign al contai ning SMPT E RP188 LTC to the SD I IN connecto r. Press t he VIDEO INPUT SEL button and, whil e viewin g the ti me data display or the video panel, sele ct SDI. 2 Set the PRESET /RE GEN s witch to PRES ET, a nd s et th[...]

Chapter 4 Recording/ Pla ybac k 49 4-2 Playb ack 4-2 Playback This sectio n describes p layback of video and audio. Disc pla yback star t position Althou gh this un it uses op tical disc s, it is design ed to of fer the most conven ient features of tape playback by VTRs. One of these is the pl ayback start posi tion, which works i n the same way as[...]

Chapter 4 Recordin g/Pla ybac k 50 4-2 Playba ck 1 With the SHIFT bu tton held down, press the STATUS but ton. The process co ntrol screen 1) appears i n the vide o pane l. 1) When the line mod e is 525(U)/525 (J), SETUP ap pears instead of BLACK. Notes • Do the follo wing operat ions withi n 30 seconds. The screen return s to the normal scre en [...]

Chapter 4 Recording/ Pla ybac k 51 4-2 Playb ack 3 If you selected “ VAR” in step 2 , set the paramet er valu e by holdi ng down the co rres ponding but ton a nd rotating the jog d ial, whil e viewin g the vid eo. Setti ng values var y with t he rota tion sp eed of th e jog dia l. 4 Repeat steps 2 and 3 a s requi red to set o ther parameters. 5[...]

Chapter 4 Recordin g/Pla ybac k 52 4-2 Playba ck setting), just turning th e jog dial with the JOG bu tton off starts playback in jog mode. Pla yback in shuttle mode In shuttle mode, you can control th e speed of playback by the angular positi on of the shuttle d ial. The ra nge of playback sp eed is ±20 ti mes normal speed. To carry ou t playback[...]

Chapter 4 Recording/ Pla ybac k 53 4-2 Playb ack Press the TH UMBNAIL but ton, turning it off. 2 Use the arrow butt ons or the jog di al to select the desi red c lip. You can sel ect clips with the following operation s. Press the PREV or NEXT button: Move to the previous or next clip. Press the PREV or NEXT button with the SH IFT button hel d down[...]

Chapter 4 Recordin g/Pla ybac k 54 4-2 Playba ck 4-2-4 Clip List Playbac k You can play back clips in the order of clip li sts created with the scene selection functi on (see page 58) . Pla ying bac k in c lip list or der Proceed as follows. 1 If the clip li st that you want to play exi sts on the disc, load it into th e current clip l ist. About t[...]

Chapter 4 Recording/ Pla ybac k 55 4-2 Playb ack To perform rep eat playbac k, set exten ded menu item 142 “REPEAT MODE” to “play,” and t hen proceed as fol lows. 1 Insert a disc. To perform repeat playback for n ormal playbac k, proceed to step 3 . 2 To perform repeat playback for c lip list play back, pres s the SU BCLIP bu tton . 3 Press[...]

Chapter 4 Recordin g/Pla ybac k 56 4-2 Playba ck You return to t he thumbnail screen, and a loc k icon appears on t he thumbnail o f the selected cl ip to show that it is locked. Locked cli ps cannot be delet ed or renamed. Unlock t he clip if you want to perform an y of these oper ations. To loc k clips wi thout displ aying t he THU MBNAIL MENU Af[...]

Chapter 4 Recording/ Pla ybac k 57 4-2 Playb ack When the target cli p is referenced in a clip list: “DELETE CLIP & CLIP LIST?” (The clip list that referenc es the clip will also be deleted .) To go to the cli p deletion screen without displayi ng the THUMBNAIL M ENU After step 2 , press the RESET butt on with the SHIFT button held down ( s[...]

58 5-1 Overv iew Chapter 5 Scene Selection 5-1 Overvie w What is scene selecti on? Scene select ion is a functi on whic h allo ws you to select material (clips) from the material recorded on a disc and perform cut ed iting. Yo u can do t his by oper ating o n this unit only. • Scene select ion is a co nvenient way to perform cu t editing in the f[...]

Chapter 5 S cene Se lect ion 59 5-1 Overv iew Flo w of scene se lection edit ing S D I S D I Inser t disc cont aining recor ded materia l into th is unit Load clip lists (s ee page 68) To edit a clip l ist Crea te and ed it a clip list • S electing clips (see page 61) • R eordering sub clips (see page 63) • Trim ming sub clips (see page 65) ?[...]

Chapter 5 Scene Sele ction 60 5-1 Overv iew Clips Material recorded on a disc with this u nit is mana ged in units called “ clips.” A cl ip contains the material betwee n a recording start poi nt (In point) and a recording end poi nt (Out point ). Clip s hav e nam es b eginn ing with “ C” fo r ex ampl e “C0001.” Clip lists Data called a[...]

Chapter 5 S cene Se lect ion 61 5-2 Creatin g Clip Lists Clip list pla ybac k Clips and cli p lists are sa ved togeth er on a disc. Clips are played back according to clip list data. 5-2 Creating Cl ip L ists Bef ore st arting Insert a disc cont aining recorded c lips into the u nit. 5-2-1 Selecting Clips There are two ways to select clips. • Sel[...]

Chapter 5 Scene Sele ction 62 5-2 Creating Clip Lists 2 Use the arrow butt ons or the jog di al to select the desi red c lip. You can al so select clip s with the fo llowing operations. Press the PREV or NEXT button: Move s to the previous or next clip. Press the PREV or NEXT button with the SH IFT button h eld down : Moves to the first or la st cl[...]

Chapter 5 S cene Se lect ion 63 5-2 Creatin g Clip Lists To search Use the jog and shuttle dials. 2 At the p oint you want to set as t he In poi nt, ho ld down the G /I N button and pre ss the SET b utton . An In point is set , and th e IN indi cator ligh ts. 3 In the same way, search for t he point you want t o set as the Out point, and then h old[...]

Chapter 5 Scene Sele ction 64 5-2 Creating Clip Lists Load the clip list from the disc i nto the unit memory (see page 68) . To return to the full-screen display Press th e THUMBNAIL butt on, tur ning it on. 3 Use the arrow butt ons or the jog di al to select the desi red su b cl ip. You can also sele ct sub clips with the following operations. Pre[...]

Chapter 5 S cene Se lect ion 65 5-2 Creatin g Clip Lists 5-2-3 T ri mming S ub Clips 1 Carry out steps 1 to 4 of 5-2-2 “Reorder ing Sub Clips” to select a sub clip and display t he sub clip ope ration menu. 2 Use the F or f butt on to selec t TRIM, and th en press the SET butt on. The first frame of t he selected sub cli p appears. The first an[...]

Chapter 5 Scene Sele ction 66 5-2 Creating Clip Lists 5-2-4 Deleting Su b Clips 1 Carry out steps 1 to 4 of 5-2-2 “Reorder ing Sub Clips” to select a sub clip and display t he sub clip ope ration menu. 2 Use the F or f butt on to selec t DELETE , and then press the SET button . The sub cli p deletion screen appe ars. To cancel the deletion a nd[...]

Chapter 5 S cene Se lect ion 67 5-2 Creatin g Clip Lists 1 Display the CLIP menu. See “To di splay the CLIP men u” (page 68). 2 Use the F or f button t o move the c ursor to SAVE, an d then press the g butt on. A list of clip lists appears. “NEW FILE ” is displ ayed for cli p li sts withou t any registered data. The dat e of creatio n or th[...]

Chapter 5 Scene Sele ction 68 5-3 Managing Clip Li sts ( CLIP Menu) 5-3 Man aging Clip List s (CLIP Menu) After you create a clip list, you can use the CLIP menu to save it to disc, load it fr om disc i nto the unit memory, a nd delete it fr om the d isc. The CLIP menu also allows y ou to clear a nd edit the current clip list. Note Note Carry out C[...]

Chapter 5 S cene Se lect ion 69 5-3 Manag ing Clip Lists (CLIP Me nu) 3 Use the F or f butt on or th e jog dial t o select t he des ired clip list , and the n press the g but ton A confirmation me ssage like t he one shown below appears. 4 Press th e SET but ton. The selec ted clip li st is loade d into the unit memo ry as the current cl ip list. I[...]

Chapter 5 Scene Sele ction 70 5-3 Managing Clip Li sts ( CLIP Menu) “00:00 .00.00. ” You can set t he initial ti me code to any value. 1 Load an existi ng clip list for whic h you want to set the initia l time cod e into to the unit m emory a s the curr ent clip list. For detail s, see 5-3-1 “Load ing a Clip Li st From Disc Into Unit Memory?[...]

Chapter 5 S cene Se lect ion 71 5-4 Using PDZ-1 Pro xy Browsi ng Software 5-4 Using PDZ-1 Proxy Browsing Software When a comput er with the PDZ- 1 Proxy B rowsing Software insta lled is connected to this unit, you c an transfer the prox y AV dat a and metadata files recorded o n a disc to the compu ter. On the comp uter side, PDZ-1 enables you to b[...]

72 6-1 Overv iew Chapter 6 File Operations 6-1 Overvie w A remote compu ter can be connecte d to thi s unit and u sed to operate on record ed data which has b een saved in d ata files, such as v ideo and audio data files. There are t wo ways to connec t a remot e computer. • FAM connec tion Connect the S400 (i.LINK) conn ector on thi s unit to th[...]

Chapter 6 File Oper ations 73 6-1 Overv iew 6-1-2 File Operation Restricti ons This sectio n explains wh ich operat ions are possible on files stored in each directory. When requi red, the foll owing operat ion table s distin guish reading and overwr iting fr om part ial read ing and overw riting . Read: Read dat a sequent ially fro m the sta rt to[...]

Chapter 6 F ile Opera tions 74 6-1 Overv iew h) When a C*.MXF file i s deleted , the C* M01.XML fi le with th e same name in the “C*” part is also dele ted automat ical ly. Notes • Directories canno t be created in the Clip direct ory. • When the following operati ons, support ed by versi on 1.5 and highe r XDCAM devic es, are carri ed out [...]

Chapter 6 File Oper ations 75 6-1 Overv iew General directory a) UTF-8 file name s can be up to 63 bytes in length. (De pending on the charact er ty pe, fi le name s (incl uding e xtensi on) may be limi ted to 21 char acters .) b) Only wh en the wri te inhibi t tab on the di sc is set to e nable reco rding, a nd when ex tended m enu item 310 “REC[...]

Chapter 6 F ile Opera tions 76 6-1 Overv iew 5 With the STOP but ton held down, rotate the jog or shuttle dial to move the asteri sk (*) on the left of the menu items to “TITLE.” The asterisk indi cates the sele cted item. 6 With the SHUTTLE bu tton held down , rotate the jog or shuttle d ial to select “enable.” The aut omatic title gen era[...]

Chapter 6 File Oper ations 77 6-1 Overv iew 1 Before you start, set the “TITLE” sub item of basi c men u it em 035 “CLI P TIT LE NA MING SELE CT” t o “enable,” and set a ti tle (see the prev ious section) . 2 Press th e MENU butto n. 3 Rotate t he jog dial or the shutt le dial to di splay menu item 03 6. 4 With the STOP butt on held dow[...]

Chapter 6 F ile Opera tions 78 6-2 File Acces s Mode File Oper ations - The user-defined name or standa rd format name is displaye d for clip s without a ti tle. • If the fi rmware of yo ur XDCAM devi ce is versi on 1.4x or lower, clips with user-defined na mes appear as “C5000” to “C 9999,” in order of recor ding. 6-2 File Ac cess M ode [...]

Chapter 6 File Oper ations 79 6-2 File Access Mode File Operations 2 If this unit is connected to a remote computer by FTP, log out from the FTP session (see p age 80) . 3 Connect the S4 00 (i.LINK) conn ector on this uni t to the i.L INK (IEEE139 4) connector on the r emote computer, using an i.LINK cable (see connections illus tration o n page 27[...]

Chapter 6 F ile Opera tions 80 6-3 FTP F ile Oper ations T o disab le F AM connections Execute one of the pr ocedures descri bed in the pr evious section “Reco nnecting” to make a FAM connect ion between this u nit and the remo te computer. To d isable FAM connection s, set extend ed menu i tem 215 “i.LINK MODE” to “AV/C.” For more info[...]

Chapter 6 File Oper ations 81 6-3 FTP File Ope ration s • Recording, play back, search an d other disc operations (see p age 16) : Stoppe d • THUMBNAIL button (see page 13) : Off • Disc access by DELETE, FORMAT, and so on in the System m enu (see page 11 7) : Stoppe d • Unsaved current clip list: Save or clear • Extende d menu item 258 ?[...]

Chapter 6 F ile Opera tions 82 6-3 FTP F ile Oper ations 6-3-2 C ommand List The FTP protocol comman ds suppor ted by th is uni t include standar d commands (see the next section) a nd extended co mmands (see page 86) . Notes • To execut e FTP c ommands, you must instal l app lication software suc h as PDZ-1 on you r computer. • The commands su[...]

Chapter 6 File Oper ations 83 6-3 FTP File Ope ration s STR U Specifies the data s tructure. STR U <SP> <structu re-code> < CRLF> <str uc ture- cod e> can b e any of t he following . However , for XDCAM, th e structure is alw a ys “F , ” regardless of t he structur e-code spec ification . • F: File structure (d ef aul [...]

Chapter 6 F ile Opera tions 84 6-3 FTP F ile Oper ations ST OR Begins t ransf er of a cop y of a file in the speci fied path on the rem ote compu ter to the c urrent d irectory on this unit. Depen ding o n the t ype of fil e tra nsf erred, the f o llo wing fi les are creat ed. •C * . M X F f i l e a) c) - C*M01.XML file (metad ata) - C*S01.MXF fi[...]

Chapter 6 File Oper ations 85 6-3 FTP File Ope ration s ST A T Send s inf o rmation about p roperties of the sp ecified file , or abou t data tran sf er status , fro m this u nit to th e remote comput er . The f ollo wing pro perty info rmation is sent, d ependi ng on the file ty pe . • MXF file -F i l e n a m e - File type -C O D E C t y p e -F [...]

Chapter 6 F ile Opera tions 86 6-3 FTP F ile Oper ations Extended commands The followin g table sho ws the ext ended FTP c ommands support ed by this u nit. In the Command syn tax column, <SP> means a space, entered by pr essing the space bar, and <CRLF> means a new line, entered by pressing the Enter ke y. Command na me Description Com[...]

Chapter 6 File Oper ations 87 6-3 FTP File Ope ration s a) This is supporte d from firmw are version 1.5 . SITE CHMOD a) L ock s and unloc ks clips . Al so se ts per mis sions f or di rect or ies and file s in the Ge nera l directory . SITE CHMOD <SP> <f lag> <SP> <pa th-name> <CRLF> Specify one o f the f o llow ing v [...]

Chapter 6 F ile Opera tions 88 6-4 Recording Continu ous Time Code Wit h FAM and FTP Connectio ns 6-4 Recording Continuous Time Code With F AM and FTP Connect ions When you ar e conne cted t o the unit by FAM o r FTP, you can create ne w clips with ti me code th at is cont inuous wit h the time co de of the last fra me of the la st clip on the disc[...]

89 7-1 Menu S ystem Configurat ion Chapter 7 Menus 7-1 Menu Syst em Configur atio n The sett ings for thi s unit use th e followi ng menus. • Setup menu See the next i tem. • Maintenan ce menu This pr ovides audi o control, an d networ k and setup menu setti ngs, and also sh ows version inf ormation. For detai ls, see 7-4 “Mai ntenance Me nu?[...]

Chapter 7 Menus 90 7-2 Basic Set up Menu 7-2 Basic Setup Me nu 7-2-1 Items in the B asic Set up Menu The basic me nu items ( excluding the items re lated to th e digital hours meter ) are li sted i n the foll owing tabl e. • Item names are t he names which app ear in the vide o panel an d on a n exte rnal mon itor, when th e input signal s to the[...]

Chapter 7 Menus 91 7-2 Basi c Setu p Menu 006 LOCAL F UNCTION ENABLE Determine w hich rec ording and pla yback con trol b utt ons on the contro l panel a re enab l ed when this u nit is contro lled fr om e xternal eq uipme nt. dis (all di sabl e) : All b ut tons a nd s wi tches are disab l ed. st&ej (stop & e ject) : Onl y the ST OP button [...]

Chapter 7 Menus 92 7-2 Basic Set up Menu 016 ALARM D ISPLA Y Select w hether or not to displ a y alarm messag es . off : Do no t displa y alarm messages . (How e v er , cer tain important alarms ar e displa y ed). limit (on (limited)) : Di spla y only a mi nim um n umbe r of ala rm message s. on : Di splay all al arm mess ages. For det ails about a[...]

Chapter 7 Menus 93 7-2 Basi c Setu p Menu a) This is supporte d from firmw are version 1.5 . 035 CLIP TITLE NAMING SELECT Sp ecify whe ther or n ot to allo w user defi nition of the t itles as signed to clips . off : Do not a llow assign ment. on: A llow as signme nt. See 6-1-3 “Assignin g User -De fined Cl ip T itles” (p age 7 5) f or more inf[...]

Chapter 7 Menus 94 7-2 Basic Set up Menu 7-2-2 Basic Menu Operations Basic setup men u operations This section exp lains how t o select setup men u items and how to chan ge their va lues. The operation s are common t o both the basi c menu and th e extended men u. 1 Press th e MENU butto n. The setup menu ap pears in the v ideo panel, and on an ext[...]

Chapter 7 Menus 95 7-2 Basi c Setu p Menu 4 With the SHUTTLE bu tton held down , rotate the jog dial or shut tle dial to ch ange the set ting. The disp lays in the video panel, on an exte rnal monitor, and in the t ime data display secti on change as shown below whe n you hold d own the SHUTTLE butto n. In the time d ata displ ay secti on, the curr[...]

Chapter 7 Menus 96 7-2 Basic Set up Menu 3 Hold down the SHUTTLE butto n, and turn the j og dial or shuttl e dial to set menu item 013 to “on.” 4 Press th e SET but ton. 5 Hold down the SHUTTLE butto n, and turn the j og dial or shuttle dial to select the line mode 525 (U), 525(J ) or 625. 6 Press th e SET but ton. 7 Turn the unit of f (press t[...]

Chapter 7 Menus 97 7-3 Exte nded Menu 7-3 E xtende d Menu 7-3-1 Items in the Extended Menu The following tab les show the items in the ext ended menu. • Item names are t he names which app ear in the vide o panel, and on an e xternal monitor to whic h the outpu t of the VIDEO OUT 2 (SUPER)/SD I OUT (SUPER) connector i s inpu t. An abbrev iated na[...]

Chapter 7 Menus 98 7-3 Exte nded Me nu 131 A UD IO V OLUME Select w hether ea ch of the ALL/ CH-1, C H-2 to CH -4 ad justment knobs on the c ontrol panel is eff ec tiv e to control th e audi o reco rding l ev el and pla yb ack le v el on each chann el or th e ALL/CH- 1 adj ustment k nob a lone functio ns as a master contro l to co ntrol th e audio [...]

Chapter 7 Menus 99 7-3 Exte nded Menu 258 LIVE LOGGING Enable o r disab le th e liv e lo gging function when us ing the PDZ-1 Pro x y Browsing Softw are. off : Disab le. on: Enab le . Note During liv e loggi ng, reg ardless o f the setti ngs of the s witc hes (INT/EXT/ RP188, PRESET/REGEN, and F-R UN/R-RUN) in the time data setti ngs section, the i[...]

Chapter 7 Menus 100 7-3 Extende d Menu External synchr oniza tion to reference signal g enerators The internal reference signal generat or is synchronized either to a reference sig nal input to the REF VIDEO IN connector or an input video si gnal. Dependi ng on the settings of extended men u items 335 and 308, and the in put signal select ion, the [...]

Chapter 7 Menus 101 7-3 Exte nded Menu Menu items in the 500s, r elating to disc pr ot ection Item num ber Item name Settings 501 STILL TIM ER T o protect t he dis c agains t shoc k a nd vib ratio ns, a nd to le ngthen the li f e of th e laser di odes , the unit a utoma tically enters standb y off mo de whene ver a sp ecified ti me ela pses i n a d[...]

Chapter 7 Menus 102 7-3 Extende d Menu 611 TC OUTPUT PHASE IN EE MODE Select the time c ode output m ode f or output from the TC OUT connect or in E-E mode . mutng (mut ing) : Supp ress t he output. thru (thr ough) : Outp ut the t ime code input to the TC IN conn ector as it is. v-in (video in put phase ) : Output the ti me cod e with the sam e pha[...]

Chapter 7 Menus 103 7-3 Exte nded Menu 652 UMID SDI V ANC LIN E Select the l ine in which U MID is output when me nu i tem 651 i s set to “on. ” 12 H (12 li ne), 13 H (13 line), 15 H (15 line), 1 6 H (16 li ne), 17 H (17 line) , 18 H (18 line), 1 9 H (19 li ne) (525 (U)/525(J) line mod es) 9 H (9 line), 1 0 H (10 lin e), 12 H (12 line ), 13 H ([...]

Chapter 7 Menus 104 7-3 Extende d Menu 703 BL ANK LINE SE LECT Switch b lanking of the v ideo o utput sig nal on or off f o r indi vidual l ines in the v er tical bla nking interva l. The Y/ C signa l and o dd/e v en fields are b lank ed sim ultan eously . Sub-item 1A L L L I N E - - - : Specify the b lan king f o r eac h line se para tely . blnk ([...]

Chapter 7 Menus 105 7-3 Exte nded Menu 713 VIDEO SET UP REFERENCE Select whether to remo v e the setu p (7.5% ) from the i nput analo g video signal s and whether to add th e setup (7 .5%) to the out put ana log vide o signal s (when 5 25(U ) or 525(J) line m ode is selecte d). Sub-item 1 INPUT LEVEL Whether to remo v e the setup (7.5%) from the in[...]

Chapter 7 Menus 106 7-3 Extende d Menu 731 WI DE MODE Sp ecify whether to reco rd and p la y bac k w ith the ad dition of wide pictu re infor mati on. Sub-item 1 INPUT Specify whet her to sa v e wide pi cture i nf ormation on a disc during recordi ng. auto : A utomat ically re cord wi de pic ture inf or mation whe n it is d etecte d in the selec te[...]

Chapter 7 Menus 107 7-3 Exte nded Menu 823 NON-A UDIO FLA G PB Control non-audio flags in di gital aud io outp ut. Sub-item 1 CH1/CH2 During pla yba c k (e xcept E-E mode), se t non-aud io flags in di gital au dio output to the f o llo wing state s. on: Set to on (d ata is non-au dio) auto : Set as f ollo ws . • When data i s read from dis c and [...]

Chapter 7 Menus 108 7-3 Extende d Menu 7-3-2 Extended Menu Operations The extended menu ca n be us ed with the same proced ures as in the basi c menu. However, sin ce with th e factor y defaul t settings t he extended men u is not di splayed, i t is fir st necessary to enable di splay of the extende d menu. See “Basic setup menu op erations” (p[...]

Chapter 7 Menus 109 7-3 Exte nded Menu 3 Replace the cov er. Note Tighten the sc rews firmly. To en able ext ended menu di splay in t he mainte nance m enu The menu screens i n the foll owing procedure are those that appear i n the vide o panel, and on a mo nitor to whic h the output of the VIDEO OUT 2 (SUPER)/S DI OUT (SUPER) conn ector is input .[...]

Chapter 7 Menus 110 7-3 Extende d Menu What is a UMID? The UMID (Uni que Mate rial Iden tifier ) is a uni que identif ier for audio-visual material defined b y the SMPTE33 0M-2003 st andard . The UMID may be used either as the 32-byte Basic UMID or as the E xtended UMID, which i ncludes an additio nal 32 bytes of Source Pac k to make a total 64 byt[...]

Chapter 7 Menus 111 7-3 Exte nded Menu 2 Set the fol lowin g it em. To change the currently selected i tem Hold down the S TOP butto n, and tur n the jog di al or shuttle dial. To select a different d igit to be chang ed Turn the jog dial or shuttl e dial. To chang e the value o f a digi t Hold down the SHUTTLE butto n, and turn the j og dial or s [...]

Chapter 7 Menus 112 7-4 Maintenanc e Menu 7-4 Maintenance M enu 7-4-1 Items in the Maintenance Menu The follo wing tab les show the items in th e mainte nance menu. • Item names are t he names which app ear in the vide o panel, and on an e xternal monitor to whic h the outpu t of the VIDEO OUT 2 (SUPER)/SD I OUT (SUPER) connector i s inpu t. • [...]

Chapter 7 Menus 113 7-4 Maint enance Menu For details of how to make settings, see “T o change network sett ings” (page 1 15). SUBNET MASK PRESET Set the subne t mask. 255.255.2 55.000 Note When DHCP is set to “ENABLE, ” it is not possible to set the subnet mask. DEF A UL T GA TEW A Y PRESET Set the def ault g atew a y . 000.000.0 00.000 No[...]

Chapter 7 Menus 114 7-4 Maintenanc e Menu For detail s about OTHERS items other than the abo ve, refer to the Ma inte nance Manu al. 7-4-2 Maintenance Men u Opera tions Basic maintenanc e menu operations The follo wing ex plains how to select m aintena nce menu items and how t o change their val ues. The menu screen shown are those t hat appear in [...]

Chapter 7 Menus 115 7-4 Maint enance Menu 4 Press the g button. A lower-level menu (setting modi fication screen) appears. The c urrent setting is h ighlighted, and the arrow ( C ) flashes to indic ate that you can move t o a higher-level menu. If the current setting is the factory default, a colo n (:) appears between the item name and the sett in[...]

Chapter 7 Menus 116 7-4 Maintenanc e Menu 1 Using the F / f bu ttons to select “IP ADDRESS.” 2 Press the g button. The IP ADDRESS PRESET menu appears, an d the digit that can be changed flashes. 3 Set the IP address. To select a different d igit to be chang ed Use the G / g butt ons. To chang e the value o f a digi t Turn the jog dial or shuttl[...]

Chapter 7 Menus 117 7-5 System Menu 7-5 S ystem Men u 7-5-1 Items in the System Menu The follo wing table s show th e items in the system menu. Item names ar e the names which a ppear in the vide o panel, and on an ext erna l monitor t o which the outpu t of th e VIDEO OUT 2 (SUPER )/SDI OUT (SUPER) c onnecto r is input. 7-5-2 System Menu Operation[...]

Chapter 7 Menus 118 7-5 System Men u T o displa y disc status and clip status Insert a disc and pro ceed as fol lows. 1 Hold down th e SHI FT butt on an d pre ss the MENU but ton. The system me nu appears in t he video pa nel or on an external moni tor. 2 Press the F bu tton or f butt on to select “DIS C MENU,” then press the g but ton. The DIS[...]

Chapter 7 Menus 119 7-5 System Menu T o set the date and time See 3-4 “Setti ng th e Date and Ti me” (pa ge 34).[...]

120 8-1 Periodic Mainten ance Chapter 8 Maintena nce and Troubleshooting 8-1 Periodic Mainte nance 8-1-1 Digital Hours Meter The digi tal hour s meter can provide six items of infor mation about th e ope rationa l histor y of t he unit . This informa tion ap pears in th e time da ta display se ction, in t he video panel , and on an extern al moni t[...]

121 8-2 Condens ation / 8-3 Er ror Message s Chapter 8 Mainte nance and T ro ubl eshoo ting 8-2 Condensation When th is unit is mov ed from a c old place to a warmer place, or ope rated i n high humidi ty, condensat ion may form on the opti cal picku p. This is called condensatio n, and if t he unit is operat ed in thi s state, i t may make correct[...]

Chapter 8 Maintenance and T roub lesho oting 122 8-4 Alarms 8-4 Alarms An alarm (warning message) app ears in the time dat a display whe n an opera tion is attemp ted which is inappro priate for the se ttings on this unit or the state of the disc. Th e vide o panel a nd an external monitor to whi ch the output of the VIDEO OUT 2 (SUPER)/S DI OUT (S[...]

Chapter 8 Mainte nance and T ro ubl eshoo ting 123 8-4 Alar ms When t he un it is po wered on a) With respe ct to se tting of b asic men u item 0 16 When a di sc is i nsert ed Messag e in time data displa y Displa y condition a) Description Action MENU V er .UP on, limit, o ff Setup men u setti ngs w ere reset, becaus e this unit w as u pgr aded. R[...]

Chapter 8 Maintenance and T roub lesho oting 124 8-4 Alarms a) With respe ct to se tting of b asic men u item 0 16 Durin g play back a) With respe ct to se tting of b asic men u item 0 16 During c ontrol pa nel op erations 4CHx24 Clip 8CHx16 Clip on, li mit The num ber of cha nnels and qu antizing bits of the lo aded d isc diff er from the speci fi[...]

Chapter 8 Mainte nance and T ro ubl eshoo ting 125 8-4 Alar ms No Disc! on A b utton w a s pressed with no disc loaded . Oper ate af ter ins erting a disc. No Disc! on , limit, o ff An attem pt to de lete a clip w as ma de with no d isc load ed. No Disc! on, limit, o ff An attem pt to f ormat a di sc w as made with no d isc load ed. REC INHI.! on A[...]

Chapter 8 Maintenance and T roub lesho oting 126 8-4 Alarms MAX# SB CL P on, li mit, o ff An attempt w as made t o add a sub c lip when th e number of registe red sub cl ips had alre ady re ached the upper limit (300) of the spe cificati ons o f this uni t. These ope rati ons are not po ssib le . CL O VER DUR on, limit, off An at tempt w as made t [...]

Chapter 8 Mainte nance and T ro ubl eshoo ting 127 8-4 Alar ms a) With respe ct to se tting of b asic men u item 0 16 Durin g recept io n of comma nds fro m an exter nal de vice co nnec ted to the REMOTE co nnect or ST OP O NCE! on, limi t The SUBCLI P but ton w as pre ssed dur ing playback of a cl ip l ist. T r y the ope ratio n agai n after sto p[...]

Chapter 8 Maintenance and T roub lesho oting 128 8-4 Alarms Run Sal vag e on, limit A rec ording or E-E displ a y co mmand wa s receiv ed f or a disc that needs cli p reco ve r y (salv age). T r y the ope ratio n agai n after r eco ve ring clips from the dis c (salv age func tion). See 3-6-7 “Han dling of Disc s When Recording D oes Not End Norma[...]

Chapter 8 Mainte nance and T ro ubl eshoo ting 129 8-4 Alar ms a) With respe ct to se tting of b asic men u item 0 16 Duri ng rec ord ing and e dit ing o perat ions Liv e Log g! on, limi t A time c ode or user bit p reset o pera tion wa s atte mpted with e xte nded men u ite m 258 “LIVE LOGGING” set t o “on. ” Set e xtend ed men u item 258 [...]

Chapter 8 Maintenance and T roub lesho oting 130 8-4 Alarms a) With respe ct to se tting of b asic men u item 0 16 Alarms relating to aud io and video s ignals a) With respe ct to se tting of b asic men u item 0 16 Alarms r elat ing t o sens ors and drives a) With respe ct to se tting of b asic men u item 0 16 List Exi sts on, limi t, off An at tem[...]

131 Specifications Appendixes Specific atio ns General Power requirements 100 V to 24 0 V AC, 50/60 Hz DC, battery Power consumpti on AC: 37W DC or batter y: 31W Peak inrush curren t (1)Power ON, cur rent prob e method: 65 A (240 V), 30 A (100 V) (2)Hot switching inrush current, measured in accorda nce with European stan dard EN5510 3-1: 35 A (230 [...]

Appendi xes 132 Specifications ±1 times normal sp eed Shut tle mod e ±20 times normal speed Video perf ormance Sampli ng fre quency Y: 13.5 MHz, R–Y/B–Y: 6.75 MHz Quantiz ation 10 bits/s ample Analog composi te inpu t to anal og composite output Bandwid th: 30 Hz to 4.5 MHz +0.5/–1.5 dB (NTSC), 25 Hz to 5.5 MHz +0.5/– 1.5 dB (PAL) S/N rat[...]

Appendix es 133 Specifications S400 (i.LINK) 6-pin ( ×1), complyi ng with I EEE 139 4, supporting file access mode P o wer input/output connectors DC IN 12V XLR 4-pin, male ( ×1), 11 to 17 V DC DC OUT 12V 1) Round type 4-pin, f emale (×1) When driven by AC power: DC 14.5 V, Max. 5W When driv en by DC power or battery: DC 11 to 17 V, M ax. 5W 1) [...]

Appendi xes 134 Using the Shoulder Belt Using the Shoulder Be lt The foll owing figur es show how to f it the shoulde r belt (not suppl ied). Caution If you f it the shoul der belt incorrect ly, the unit ma y fall down and cause b ody inj ury. Fol low the pro cedures describe d below to fit or remove the shou lder belt. T o fit the shoulder belt T [...]

Appendix e s 135 Notice Concernin g the Software License of This Unit Notice Co ncerning the Soft ware Lice nse of This Unit Thank you for you r purcha sing thi s Sony pr oduct. P lease r ead the f ollowing notice be fore using t he produ ct. By insta lling, copying o r other wise usin g the product , you wi ll be deemed to have understoo d and agr[...]

Appendix es 136 Notice Concer ning t he So ftware L icens e of Th is Unit GNU GENERAL PUBLIC LIC ENSE TERMS AND CO NDITIONS FOR COPYING, DI STRIBUTION A ND MODIFICATI ON 0. This Licen se applies t o any prog ram or ot her work whic h conta ins a noti ce placed by the copy right holder saying it may be dist ributed unde r the terms of this Gener al [...]

Appendix e s 137 Notice Concernin g the Software License of This Unit a) Accompany it wit h the complet e corresponding machine-read a ble source code, which must be dist ributed u nder the terms of Sect ions 1 and 2 above on a medium cust omarily u sed for softwar e interchan ge; or, b) Accompa ny it with a writt en offer, valid f or at least thre[...]

Appendix es 138 Notice Concer ning t he So ftware L icens e of Th is Unit This secti on is intended to make thorough ly clear what is believed t o be a conseque nce of the rest of this License. 8. If the dist ributio n and/or use of the Pr ogram is rest ricted in certain co untries e ither by pa tents or by c opyrigh ted interfaces, the original co[...]

Appendix e s 139 Notice Concernin g the Software License of This Unit This program is distributed in the hop e that it will be useful , but WITHOUT ANY WARRANT Y; without even the implied warranty of MERCHANTA BILITY or FITNESS FOR A P A RTICULAR PURPOS E. See the GNU General Public License for more details. You should h ave rece ived a copy o f th[...]

Appendix es 140 Notice Concer ning t he So ftware L icens e of Th is Unit For example, i f you di stribute copies of the libr ary, whet her grati s or for a fee , you must give the rec ipients a ll the ri ghts that we gave yo u. You must ma ke sure tha t they, too, r eceive or can get t he source co de. If you l ink other co de with t he library, y[...]

Appendix e s 141 Notice Concernin g the Software License of This Unit The “Library”, bel ow, refers to any such so ftware library or work w hich has been distributed under t hese terms. A “work based on th e Librar y” means eit her the Li brary or a ny deriva tive work under copy right law: that is to say, a work containing the L ibrary or [...]

Appendix es 142 Notice Concer ning t he So ftware L icens e of Th is Unit 3. You may opt to appl y the term s of th e ordinary GNU General P ublic Lice nse instead o f this L icense to a given copy of the Library . To do this, y ou must alter all the notices tha t refer to this License, so that t hey refer to th e ordinary GNU General Public Licens[...]

Appendix e s 143 Notice Concernin g the Software License of This Unit containing t he modif ied Librar y. (It i s understoo d that th e user who c hanges th e contents of d efinit ions files i n the Library will not necessarily be abl e to recompile the applicat ion to use the modi fied defini tions.) b) Use a suitable shared library mechani sm for[...]

Appendix es 144 Notice Concer ning t he So ftware L icens e of Th is Unit to satisf y simultaneousl y your ob ligations u nder this License and any other per tinent ob ligati ons, then as a consequence you may no t distribute t he Library at all. For e xample, if a patent l icense would not permit roy alty-free redistribution of the Library by all [...]

Appendix e s 145 Notice Concernin g the Software License of This Unit END OF TERMS AND CON DITIONS How to Appl y Thes e Terms t o Your New Lib rari es If you develop a new li brary, and you wan t it to be of the grea test possi ble use t o th e public, we re commend making it f ree software that everyone ca n redistribu te and c hange. You c an do [...]

Appendix es 146 Notice Concer ning t he So ftware L icens e of Th is Unit THIS SOFTW ARE IS PROVIDED B Y THE REGENT S AND CONTRIBUTOR S “AS IS” AND ANY EX PRESS OR IMPLIED WAR RANTIES, INCL UDING, BUT NOT LI MITED TO, THE IMPLIED WARR ANTIES OF MERCHANTABI LITY AND FITNESS F OR A PARTICUL AR PURPOSE AR E DISCLAIMED. IN NO EVENT SHALL THE REG EN[...]

Appendix e s 147 Notice Concernin g the Software License of This Unit NEGLIGENCE OR OTHER TOR TIOUS ACTION , ARISING OUT OF OR IN CONN ECTION WITH THE USE OR PERFORM ANCE OF THIS SOFTWAR E. ----- Part 2: Networks Associates Technol ogy, Inc. copyri ght notice (BSD) ----- Copyrigh t © 2001, Networ ks Associates Techn ology, In c. All rights reserve[...]

Appendix es 148 MPEG-4 Vi sual Pa tent Portfo lio Lic ense MPEG-4 Visual Patent Portfolio License This produ ct is licensed u nder the MPEG- 4 Visual P atent Portfol io License. F or the personal a nd non- commercial use of a consumer for (i) enc oding vid eo in compli ance with the MPE G-4 Visual Standard (“MPEG-4 Vi deo”) and/ or (ii) decodin[...]

Appendix es 149 Gloss ary Glossar y AES/ EBU A standard est ablished jo intl y by the AES (Audi o Engineeri ng Societ y) and EBU (European Broadcasting Union) for serial transmission of digita l audio. T wo channel s of au dio can be transmi tted via a si ngle connector. Clip A recording unit. Clips are created every time recordi ng starts and stop[...]

Appendix es 150 Glossa ry UMID Unique Materi al Identifier. A standard (SMPTE 330 M) for video and audio metadata. The Basic section of a UMID contains a globall y unique n umber and a material number for the identifi cation of recorded material . An optional section ca lled the “So urce Pack” contains information such as the time and locatio n[...]

Inde x 151 Index Index A AC IN connector 24 AC power inlet connector 11 switch 11 ACCESS indi cator 12 , 17 Accessories not su pplied 133 supplied 1 33 AES/EBU 19 Alarms 122 list 122 ALL/CH-1, CH-2 to CH-4 adjustment knob s 15 ANALOG 19 Analog audio s ignal in puts/ outputs 23 interfaces 10 video s ignal in puts /output s 23 Appendi xes 131 Arrow b[...]

Inde x 152 Index K KEY INHI indicator 17 KEY INHI switch 12 L LCD panel 11, 17 Level adjus tment 43 LEVEL knob 21 LIGHT switch 20 Line mode setting 7 Live loggin g functi on 71 Loading/u nloading a d isc 38 LOCAL 12 M Main ten ance 72, 120 periodic 120 Main ten ance m enu 112 items 112 operations 114 MAR K1/M ARK 2 butt on 16 MENU butto n 14 Menus [...]

Inde x 153 Index types 36 Time data settings section 13 Title 75 Troublesho oting 120 U UB/VIUB indi cator 1 8 U-BIT 13 UMID data 10 9 User bit recording 44 V VARIABLE switch 15 VIDEO IN connectors 23 INPUT SEL button 19 OUT 1, OUT 2 (SUPER) connectors 23 Video panel 17 Video process ing adjusting parameters 49 Video recording format setting 43 VIT[...]

The mate rial conta ined i n this manual consi sts of in formation that is the prop erty of Sony Co rporati on and is inten ded sol ely for use b y the p urchasers of the eq uipme nt descri bed in thi s manual. Sony Co rporati on expr essly p rohibi ts the duplic ation of any portion of this m anual or the use th ereof for a ny pur pose other than [...]

Sony Cor poration © 2006 PDW-R1 (SY) 3-991-786- 02 (1) http://www.s ony.net/[...]