Sony TRV312 manuale d’uso

 1997 by Sony Corporation 3-859-595- 13 (1) CCD-TRV32/TR V52/TRV53/ TRV312/TRV512 h CCD-TRV52 Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Owner’s record The model and serial numbers are located on the bottom. Record the model and serial numbers in the space provided [...]

2 For the Sony Service Center nearest you call 1-800-222-SONY (United States only). For the Factory Service Center nearest you call 416-499-SONY (Canada only). Caution: Do not handle damaged or leaking nickel- cadmium batteries. For the Customers in the U.S.A. CAUTION You are cautioned that any changes or modifications not expressly approved in thi[...]

3 Before you begin Before you begin Using this manual .................................. 4 Checking supplied accessories ............. 6 Getting started Charging and installing the battery pack ............................... 7 Inserting a cassette ............................... 10 Basic operations Camera recording ................................[...]

4 LASER LINK – r r – r Before you begin Using this manual The instructions in this manual are for the five models listed below. Before you start reading this manual and operating the unit, check your model number by looking at the bottom of your camcorder. The CCD-TRV52 is the model used for illustration purposes. Otherwise, the model name is i[...]

5 Before you begin Precautions on camcorder care • The LCD screen and/or color viewfinder are manufactured using high-precision technology. However, there may be some tiny black points and/or bright points (red, blue or green in color) that constantly appear in the viewfinder or on the LCD screen. These points are normal in the manufacturing proc[...]

6 Check that the following accessories are supplied with your camcorder. 56 Checking supplied accessories 1 23 4 7 8 1 Wireless Remote Commander (1) (p. 22, 72) 2 NP-33 Battery Pack (1) (p. 7) 3 Battery case (1) (p. 25) CCD-TRV32/TRV52/TRV53 only 4 A/V connecting cable (1) (p. 45) * for stereo model 5 Size AA (R6) battery for Remote Commander (2) ([...]

7 Getting started Getting started Charging and installing the battery pack Before using your camcorder, you first need to charge and install the battery pack. To charge the battery pack, use the supplied AC power adaptor. Charging the battery pack Charge the battery pack on a flat place without vibration. (1) Connect the AC power adaptor to a wall [...]

8 Battery life (in minutes) CCD-TRV32/TRV312 Charging and installing the battery pack While recording 1) While playing back on LCD 3) LCD close While recording 1) While playing back on LCD 3) LCD open 2) LCD close CCD-TRV52/TRV512 Battery pack NP-33 (supplied) 60 (35) 90 (50) 65 NP-60D 95 (50) 135 (75) 95 NP-C65 105 (60) 155 (85) 110 While recordin[...]

9 Getting started To remove the battery pack Slide the battery pack in the direction of the arrow. Notes on charging the battery pack • The POWER lamp will remain lit for a while even if the battery pack is removed and the power cord is unplugged after charging the battery pack. This is normal. • If the POWER lamp does not light, set the select[...]

10 Inserting a cassette Make sure that a power source is installed. (1) While pressing the small blue button, slide EJECT in the direction of the arrow. The cassette compartment automatically opens. (2) Insert a cassette (not supplied) with the window facing out. (3) Press the PUSH mark on the cassette compartment to close it. The cassette compartm[...]

11 Basic operations Make sure that a power source and a cassette is inserted and that the START/STOP MODE switch inside the LCD panel is set to . When you use the camcorder for the first time, power on it and reset the date and time to your time (p. 50) before you start recording. The date is automatically recorded for 10 seconds after you start re[...]

12 Camera recording [b] [a] Note on standby mode If you leave the camcorder for 5 minutes or more with a cassette inserted in Standby mode, the camcorder goes off automatically. This prevents wearing down the battery and wearing out the tape. To resume Standby mode, turn STANDBY down once and turn it up again. To start recording, press START/STOP. [...]

13 Basic operations Note on the AUTO DATE feature The clock is set to East Coast Standard Time at the factory. You can reset the clock in the menu system. The AUTO DATE feature shows the date automatically once a day. However, the date may automatically appear more than once a day when: – you reset the date and time. – you eject and insert the [...]

14 Camera recording To extend the recording time in 5SEC mode Press START/STOP again before all the dots disappear. Recording continues for about 5 seconds from the moment you press START/STOP. Note on 5SEC recording If you have turned off the indicators on the LCD screen, the dots do not appear . Selecting the start/stop mode Your camcorder has tw[...]

15 Basic operations Camera recording Shooting with the LCD screen You can also record the picture while looking at the LCD screen. When using the LCD screen, the viewfinder turns off automatically. You cannot monitor the sound from the speaker during recording. (1) While pressing PUSH OPEN, open the LCD panel. (2) Adjust the angle of the LCD panel.[...]

16 You can turn the LCD panel over so that it faces the other way and you can let the subject monitor the shot while shooting with the viewfinder. Turn the LCD panel vertically first until it clicks, then turn it over. The indicator appears (Mirror mode) and the date and tape counter indicators disappear. To cancel mirror mode Turn the LCD panel ba[...]

17 Basic operations 1 2 3 For hand-held shots, you ’ ll get better results by holding the camcorder according to the following suggestions: • Hold the camcorder firmly and secure it with the grip strap so that you can easily manipulate the controls with your thumb. • Place your right elbow against your side. • Place your left hand under the[...]

18 Cautions on the viewfinder and the LCD • Do not pick up the camcorder by the viewfinder or by the LCD panel [c] . • Do not place the camcorder so as to point the viewfinder or the LCD screen toward the sun. The inside of the viewfinder or the LCD panel may be damaged. Be careful when placing the camcorder under sunlight or by a window [d] . [...]

19 Basic operations Checking the recor ded picture Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the viewfinder. You can also review the picture on the LCD screen. (1) While pressing the small green button on the POWER switch, set it to CAMERA. (2) Turn STANDBY up. (3) Press the Р( Π) side of EDITSEA[...]

20 To go back to the last recorded point after edit search Press END SEARCH. The last recorded point is played back for about 5 seconds if the tape was recorded in SP mode, or 10 seconds if the tape was recorded in LP mode, and stops. Note that this function does not work once you eject the cassette after you recorded in the tape. To begin re-recor[...]

21 Basic operations You can monitor the playback picture on the LCD screen. (1) While pressing the small green button on the POWER switch, set it to PLAYER. (2) Insert the recorded tape with the window facing out. (3) While pressing PUSH OPEN, open the LCD panel. Adjust the angle of the LCD panel or the brightness of the LCD screen if necessary. (4[...]

22 Using the Remote Commander You can control playback using the supplied Remote Commander. Before using the Remote Commander, insert the size AA (R6) batteries. To erase the screen indicators Press DISPLAY to erase the screen indicators on the LCD screen. To display the indicators, press again. The indicators don ’ t appear on the TV. Using head[...]

23 Basic operations Sear ching for the end of the pictur e You can go to the end of the recorded portion after you record and play back the tape to make the transition between the last scene you recorded and the next scene smooth. The tape starts rewinding or fast-forwarding. Then, the last 5 seconds play back if the tape was recorded in SP mode, o[...]

24 Advanced operations Using alternative power sources You can choose any of the following power sources for your camcorder: battery pack, the house current, alkaline battery and 12/24 V car battery. Choose the appropriate power source depending on where you want to use your camcorder. Note on power sources Disconnecting the power source or removin[...]

25 Advanced operations Using alternative power sources WARNING The power cord must only be changed at qualified service shop. PRECAUTIONS The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off. Notes on the POWER lamp • The POWER lamp will remain lit f[...]

26 Battery life (in minutes) Using Sony alkaline batteries at 77 ° F (25 ° C) While playing back on LCD While recording LCD open LCD close Approximate continuous recording time indoors. Figures in parentheses are approximate recording time when you repeat recording start/stop, zooming and turning the power on/off. The actual battery life may be s[...]

27 Advanced operations Changing the mode settings You can change the mode settings to further enjoy the features and functions of the camcorder. (1) While pressing PUSH OPEN, open the LCD panel. (2) Press MENU to display the menu. (3) Turn the control dial to select the desired item, and press the dial. (4) Turn the control dial to select the desir[...]

28 Selecting the mode setting of each item Items for both CAMERA and PLAYER modes COMMANDER <ON/OFF> • Select ON when using the supplied Remote Commander for the camcorder. • Select OFF when not using the Remote Commander. BEEP* <ON/OFF> • Select ON so that beeps sound when you start/stop recording, etc. • Select OFF when you do[...]

29 Advanced operations Item for PLAYER mode only HiFi SOUND <STEREO/1/2> (CCD-TRV52/TRV512 only) • Normally select STEREO. • Select 1 or 2 to play back a dual sound track tape. * These settings are retained even when the battery is removed, as long as the lithium battery is in place. Notes on DEMO MODE • DEMO MODE is set to STBY at the [...]

30 Recor ding with the date or time Before you start recording or during recording, press DATE or TIME inside the LCD panel. You can record the date or time displayed on the LCD screen or in the viewfinder with the picture. You cannot record the date and time at the same time. Except for the date or time indicator, no indicator is recorded. The clo[...]

31 Advanced operations Fade-in and fade-out You can fade in or out to give your recording a professional appearance. When fading in, the picture gradually fades in from black while the sound increases. When fading out, the picture gradually fades to black while the sound decreases. When fading in [a] (1) While the camcorder is in Standby mode, pres[...]

32 [b] [a] [c] Enjoying picture ef fect Selecting picture effect You can make pictures like those of television with the Picture Effect function. MOSAIC [a] The picture is mosaic. SOLARIZE [b] The light intensity is more clear, and the picture looks like a painting. B&W The picture is monochrome (black and white). SEPIA The picture is sepia. NE[...]

33 Advanced operations Enjoying picture effect Using picture effect function (1) While pressing PUSH OPEN, open the LCD panel. (2) While the camcorder is in Standby mode, press PICTURE EFFECT to select the desired Picture Effect mode. Returning to normal mode Press PICTURE EFFECT until the Picture Effect indicator disappears. Note on the picture ef[...]

34 Using the wide mode function Selecting the desired mode You can record a cinemalike picture (CINEMA) or a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9FULL). CINEMA Black bands appear at the top and the bottom of the screen. The viewfinder or the LCD screen [a] and a normal TV screen [b] look wide. You can also watch the picture wi[...]

35 Advanced operations Using the wide mode function (1) While pressing PUSH OPEN, open the LCD panel. (2) While the camcorder is in Standby mode, press 16:9 WIDE repeatedly so that the desired mode indicator appears. To cancel wide mode Press 16:9 WIDE repeatedly until the wide mode indicator disappears. To watch the tape recorded in wide mode To w[...]

36 Focusing manually When to use manual focus In the following cases you should obtain better results by adjusting the focus manually. • Insufficient light [a] • Subjects with little contrast — walls, sky, etc. [b] • Too much brightness behind the subject [c] • Horizontal stripes [d] • Subjects through frosted glass • Subjects beyond [...]

37 Advanced operations Using the PROGRAM AE function You can select from three PROGRAM AE (Auto Exposure) modes to suit your shooting situation. When you use PROGRAM AE, you can capture high-speed action or night views. Selecting the best mode Select the best mode by using the following examples. å Sports mode • Outdoor sports scenes such as foo[...]

38 Shooting with backlighting When you shoot a subject with the light source behind the subject or a subject with a light background, use the BACK LIGHT function. Press BACK LIGHT. The c indicator appears in the viewfinder or on the LCD screen. [a] Subject is too dark because of backlight. [b] Subject becomes bright with backlight compensation. Aft[...]

39 Advanced operations When you shoot, the Ó indicator appears. This indicates that the SteadyShot function is working and the camcorder compensates for camera-shake. You can release the SteadyShot function when you do not need to use the SteadyShot function. Do not use the SteadyShot function when shooting a stationary object with a tripod. (1) W[...]

40 Superimposing a title You can select from eight preset titles and two titles you made to superimpose it on the picture during recording. Each time you press TITLE, the preset titles appear one by one. Selecting the language (1) While pressing PUSH OPEN, open the LCD panel. (2) Press MENU to display the menu. (3) Turn the control dial to select T[...]

41 Advanced operations Superimposing titles To superimpose from the beginning (1) Set the POWER switch to CAMERA. (2) Turn STANDBY up. (3) While pressing PUSH OPEN, open the LCD panel. (4) Press TITLE repeatedly until the desired title appears. The title flashes. (5) Press START/STOP to start recording. (6) Press TITLE when you want to turn off the[...]

42 To select the title position (1) Press MENU to display the menu on the LCD screen. (2) Turn the control dial to select TITLE POS, then press the dial. (3) Turn the control dial to select CENTER [a] or BOTTOM [b] , then press the dial. (4) Press MENU to erase the menu display. Superimposing a title HELLO! HELLO! [a] [b][...]

43 Advanced operations Making your own titles You can make two titles of up to 22 characters each, and store them in memory. We recommend to eject the cassette before you begin so that the power is not turned off on the way. (1) While pressing PUSH OPEN, open the LCD panel. (2) While the camcorder is in Standby mode, press MENU to display the menu.[...]

44 To erase the title you have made Press MENU, select the title you want to erase, and press the dial. Select ↵ at the leftmost character, then press the dial. Do not select the blank to erase a character. Otherwise, the blank is stored as a title in memory. To change the title you have made In step 3, select TITLE1 SET or TITLE2 SET, depending [...]

45 Advanced operations W atching on a TV screen AUDIO IN VIDEO IN VCR TV VIDEO OUT AUDIO OUT AUDIO IN VIDEO IN TV VIDEO OUT AUDIO OUT : Signal flow : Signal flow Connect the camcorder to your VCR or TV to watch the playback picture on the TV screen. When monitoring the playback picture by connecting the camcorder to your TV, we recommend you to use[...]

46 Connecting CCD-TRV32/TRV312/TRV53 If your VCR or TV is a monaural type (CCD-TRV52/TRV512 only) Connect only the white plug for audio on both the camcorder and the VCR or the TV. With this connection, the sound is monaural even on the stereo model. To connect to a VCR or TV without Video/Audio input jacks Use the RFU-95UC RFU adaptor (not supplie[...]

47 Advanced operations Editing onto another tape You can create your own video program by editing with any other h 8 mm, H Hi8, j VHS, k S-VHS,  VHSC, K S-VHSC, l Betamax or ¬ ED Betamax VCR that has video/audio inputs. Turn down the volume of the camcorder while editing. Otherwise, picture distortion may occur. After connecting the camcorder t[...]

48 Additional information Changing the lithium battery in the camcorder Your camcorder is supplied with a lithium battery installed. When the battery becomes weak or dead, the I indicator flashes in the viewfinder or on the LCD screen for about 5 seconds when you set the POWER switch to CAMERA. In this case, replace the battery with a Sony CR2025 o[...]

49 Additional information Changing the lithium battery When replacing the lithium battery, keep the battery pack or other power source attached. Otherwise, you will need to reset the date and time . (1) While pressing PUSH OPEN, open the LCD panel. (2) Open the lid of the lithium battery compartment. (3) Push the battery in once and pull it out fro[...]

50 Resetting the date and time You can reset the date and time in the menu system. (1) Set the POWER switch to CAMERA. (2) While pressing PUSH OPEN, open the LCD panel. (3) Press MENU to display the menu. (4) Turn the control dial to select CLOCK SET, then press the dial. (5) Turn the control dial to select the desired year, then press the dial. (6[...]

51 Additional information The year indicator changes as follows: Note on the time indicator The internal clock of this camcorder operates on a 12-hour cycle. • 12:00 AM stands for midnight. • 12:00 PM stands for noon. Resetting the date and time 1997 1998 2025[...]

52 Playback modes The playback mode (SP/LP) is selected automatically according to the format in which the tape has been recorded. The quality of the recorded picture in LP mode, however, will not be as good as that in SP mode. Note on AFM HiFi stereo (CCD-TRV52/TRV512 only) When you play back a tape, the sound will be in monaural if: • You recor[...]

53 Additional information Tips for using the battery pack This section shows you how you can get the most out of your battery pack. Preparing the battery pack Always carry additional batteries Have sufficient battery pack power to do 2 to 3 times as much recording as you have planned. Battery life is shorter in cold environment Battery efficiency i[...]

54 The battery heats up During charging or recording, the battery pack heats up. This is caused by energy that has been generated and a chemical change that has occurred inside the battery pack. This is not cause for concern and is normal. Battery pack care • Remove the battery pack from the camcorder after using it, and keep it in a cool place. [...]

55 Additional information Notes on the terminals If the terminals (metal parts on the back) are not clean, the battery charge duration will be shortened. When the terminals are not clean or when the battery pack has not been used for a long time, repeatedly install and remove the battery pack a few times. This improves the contact condition. Also, [...]

56 Maintenance information and pr ecautions Moisture condensation If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the camcorder may not operate correctly. To prevent[...]

57 Additional information Video head cleaning To ensure normal recording and clear pictures, clean the video heads. When v appears in CAMERA mode or playback pictures are “ noisy ” or hardly visible, the video heads may be dirty. [a ] Slightly dirty [b] Dirty If this happens, clean the video heads with the Sony V8-25CLH cleaning cassette (not s[...]

58 Removing dust from inside the viewfinder – CCD-TRV32/TRV52/TRV312/TRV512 only (1) Remove the screw with a screwdriver (not supplied). Then, while sliding the RELEASE knob, turn the eyecup in the direction of the arrow and pull it out. (2) Clean the surface with a commercially available blower. Caution Do not remove any other screws. You may re[...]

59 Additional information Precautions Camcorder operation • Operate the camcorder using 6.0 V (battery pack), or 7.5 V (AC power adaptor). • For DC or AC operation, use only the recommended accessories. • Should any solid object or liquid fall into the casing, unplug the camcorder and have it checked by your nearest Sony dealer before operati[...]

60 AC power adaptor Charging • Attach the battery pack firmly. • Place the battery pack on a flat surface without vibration during charging. Others • Unplug the unit from the wall outlet when not in use for a long time. To disconnect the power cord, pull it out by the plug. Never pull the cord itself. • Do not operate the unit with a damage[...]

61 Additional information Using your camcor der abr oad Each country or area has its own electricity and TV color systems. Before using your camcorder abroad, check the following points: Power sources You can use your camcorder in any country or area with the supplied AC power adaptor within 110 V to 240 V AC, 50/60 Hz. Use a commercially available[...]

62 The power is not on. The power goes off. The battery pack is quickly discharged. START/STOP does not operate. No function except for cassette ejection works. The tape does not move when a tape transport button is pressed. The date or time indicator is flashing. T r ouble check The cassette cannot be removed from the holder. If you run into any p[...]

63 Additional information The End Search function does not activate. The date or time indicator disappears. The SteadyShot function does not activate. The autofocusing function does not work. Recording stops in a few seconds. The title display position shifts. The fader function does not work. An unknown picture is displayed in the viewfinder or on[...]

64 The supplied Remote Commander does not work . Others Symptom Cause and/or Corrective Actions • COMMANDER is set to OFF. m Set it to ON in the menu system. (p. 27) • Something is blocking the infrared rays. m Remove the obstacle. • The battery is not inserted with the correct polarity. m Insert the battery with the correct polarity. (p. 72)[...]

65 Additional information Remove the battery pack from the AC power adaptor. Then install the same battery pack again. When the CHARGE lamp flashes again Install another battery pack. When the CHARGE lamp does not flash again If the CHARGE lamp lights up and goes out after a while, there is no problem.* When the CHARGE lamp does not flash again If [...]

66 Video camera recorder System Video recording system Four rotary heads (SP/LP independent heads), Helical scanning, FM system Audio recording system Rotary heads, FM system Video signal NTSC color, EIA standards Usable cassette 8 mm video format cassette (standard 8 mm) Recording/Playback time SP mode: 2 hours (P6-120) LP mode: 4 hours (P6-120) F[...]

67 Additional information AC power adaptor Power requirements 110 – 240 V AC, 50/60Hz Power consumption AC-V16: 20 W AC-V16A: 22 W Output voltage DC OUT in operation mode 7.5 V, 1.8 A Battery charge terminal 10 V, 1.1 A in charge mode Application Sony battery packs NP-33 (supplied), NP-60D, NP-C65, NP-68, NP-80/80D, NP-98/ 98D Operating temperatu[...]

68 Identifying the parts 1 Tape transport buttons (p. 21, 22) π STOP 0 REW (rewind) · PLAY (playback) ) FF (fast forward) P PAUSE These buttons will function in PLAYER mode. 2 EDITSEARCH button (p. 19) 3 LASER LINK button (p. 46) CCD-TRV52/TRV53/TRV512 only 4 Accessory shoe 5 Transmitter CCD-TRV52/TRV53/TRV512 only 6 Lens cover 7 Recording lamp 8[...]

69 Additional information Identifying the parts !§ TIME button (p. 30) !¶ DATE button (p. 30) !• Speaker !ª Recording lamp @º Lithium battery compartment (p. 49) @¡ LCD screen (p. 15, 16, 21, 74) @™ 16:9 WIDE button (p. 35) @£ TITLE button (p. 41) @¢ Power zoom lever (p. 13) @∞ DISPLAY button (p. 21) @§ STEADY SHOT button (p. 39) @¶ [...]

70 Identifying the parts #™ #£ #∞ #§ #¶ #¢ #• $º $¡ $™ $£ $¢ $∞ #ª #™ POWER switch (p. 11, 21) #£ PUSH OPEN button (p. 15, 16, 21) #¢ Focus dial (p. 36) #∞ FOCUS switch (p. 36) #§ PROGRAM AE button (p. 37) #¶ VOLUME button (p. 21) #• Eyecup (p. 58) #ª BRIGHT button (p. 15) $º STANDBY switch (p. 11) $¡ START/STOP butt[...]

71 Additional information 1 2 3 Identifying the parts $§ $¶ $• $ª %™ %£ %∞ %§ %¶ %• %¢ %º %¡ $§ Eyecup release knob (p. 58) CCD-TRV32/TRV52/TRV312/TRV512 only $¶ EJECT knob (p. 10) $• Hooks for shoulder strap $ª Battery mounting surface (p. 9) %º FADER button (p. 31) %¡ BACK LIGHT button (p. 38) %™ Grip strap (p. 17) %£ C[...]

72 Identifying the parts Remote Commander Using the Remote Commander Make sure that COMMANDER is set to ON in the menu system. The buttons that have the same name on the Remote Commander as on the camcorder function identically. 4 5 1 2 3 1 Transmitter Point toward the remote sensor to control the camcorder after turning on the camcorder. 2 Tape tr[...]

73 Additional information 15 ˚ 15 ˚ 15 ˚ 15 ˚ Remote control direction Aim the Remote Commander to the remote sensor within the range as shown below. Notes on the Remote Commander • Keep the remote sensor away from strong light sources such as direct sunlight or illumination. Otherwise, the remote control may not be effective. • Be sure tha[...]

74 Operation indicators In the viewfinder and on the LCD screen 1 Power zoom indicator (p. 13) 2 Manual focus indicaror (p. 36) 3 PROGRAM AE indicator (p. 37) 4 SteadyShot indicator (p. 39) 5 Back light indicator (p. 38) 6 FADER indicator (p. 31) 7 Wide mode indicator (p. 34) 8 Picture Effect indicator (p. 32) 9 BRT (brightness) indicator (p. 15) V[...]

75 Additional information W ar ning indicators The warning indicators and the recording lamp flash to inform you of the following situations. The illustrations below are the warning indicators of the viewfinder and the LCD screen. The same indicators flash also in the display window. ≥ : You can hear the beep sound when BEEP is set to ON in the m[...]

Index Sony Corporation Printed in Japan Q, R REC MODE ........................ 2 8 Rec. Review ........................ 19 Remote Commander ......... 72 Remote control jack (LANC) ............................... 70 Rewind ................................ 2 1 S Shoulder strap ................... 71 Sports mode ....................... 37 STANDBY ....[...]