Supermicro SuperServer 1027R-WC1R manuale d’uso

® S UPER S ER VER 1027R-WC1R 1027R-WC1R T S UPER USER’S MANUAL 1.0[...]

The information in this User ’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: F[...]

iii Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 1027R- WC1R/1027R-WC1RT . Installation and maintainance should be performed by experienced technicians only . The SuperServer 1027R-WC1R/1027R-WC1RT is a high-en[...]

S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual iv Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X9DRW -CF31/CTF31 serverboard, including the locations and functions of connections, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and when recon fi guring [...]

Notes Preface v[...]

vi T able of Contents Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Serverboard Features ..................................................................................... 1-2 Processors ........................................................[...]

vii 3-2 Control Panel Buttons ..................................................................................... 3-1 Power .............................................................................................................. 3-1 UID .........................................................................................................[...]

viii S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Memory Support .............................................................................................. 5-8 DIMM Installation ............................................................................................ 5-8 5-6 Adding PCI Add-On Cards ..............................[...]

Chapter 1 Introduction 1-1 Overview The SuperServer 1027R-WC1R/1027R-WC1RT is comprised of two main sub- systems: the SC1 16AC-R700WB 1U chassis and the X9DR W-CF31/CTF31 dual processor serverboard. Please refer to our web site for information on operating systems that have been certi fi ed for use with the system (www .supermicro.com). In additio[...]

1-2 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual 1-2 Serverboard Features The SuperServer 1027R-WC1R/1027R-WC1RT is built around the X9DRW -CF31/ CTF31, a dual processor serverboard based on the Intel C602J chipset and designed to provide maximum performance. Below are the main features of the X9DRW -CF31/CTF31. (See Figure 1-1 for a b[...]

1-3 Chapter 1: Introduction Rear I/O Ports Ports on the I/O backplane include a VGA port, four USB 2.0 ports, two gigabit Ethernet ports and one dedicated IPMI port. A UID (Unit Identi fi er) button and LED are also located beside the PCI-E slots. 1-3 Server Chassis Features The SC1 16AC-R700WB is Supermicro's third-generation 1U chassis. The[...]

1-4 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Figure 1-1. Intel C602J Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. PE2 PE1 PROCESSOR PROCESSOR DDR3 DIMM #1 #2 DDR3 DIMM DDR3 DIMM DDR3 DIMM DDR3 DIMM #2 #1 DDR3 DIMM G A CPU Rear DDR3 DIMM B DDR3 DIMM D C H F E Socket 00 Socket[...]

1-5 Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .supermicro.com Europe Address: Super Micro Com[...]

1-6 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Notes[...]

Chapter 2: Server Installation 2-1 Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 1027R- WC1R/1027R-WC1RT up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time. This quick setup assumes that your syst[...]

2-2 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual • This product is for installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). • This product is not suitable for use with visual display work place devices acccording to §2 of the the German Ordinance for Work with V isual Display[...]

Chapter 2: Server Installation 2-3 Rack Mounting Considerations Ambient Operating T emperature If installed in a closed or multi-unit rack assembly , the ambient operating tempera- ture of the rack environment may be greater than the ambient temperature of the room. Therefore, consideration should be given to installing the equipment in an environm[...]

2-4 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual 2-5 Rack Mounting Instructions This section provides information on installing the SC1 16 chassis into a rack unit with the rails provided. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly . Y ou should also refer to the installa[...]

Chapter 2: Server Installation 2-5 Figure 2-2. Identifying the Sections of the Rack Rails (right side rail shown) Inner Rail Extension The SC1 16 chassis includes a set of inner rails in two sections: inner rails and inner rail extensions. The inner rails are pre-attached and do not interfere with normal use of the chassis if you decide not to use [...]

2-6 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Outer Rails Installing the Outer Rails to the Rack 1. Attach the shorter outer rail to the outside of the longer outer rail. Y ou must align the pins with the slides. Both bracket ends must face the same direction. 2. Adjust both the shorter and longer rails to the proper distance so tha[...]

Chapter 2: Server Installation 2-7 Figure 2-4. Installing the Outer Rails to the Server Rack 1 2 1 3 1 3 Note: fi gures are for illustrative purposes only . Always install servers to the bottom of a rack fi rst.[...]

2-8 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Figure 2-5. Installing the Rack Rails Installing the Chassis into a Rack 1. Con fi rm that chassis includes the inner rails and inner rail extensions. Also- con fi rm that the outer rails are installed on the rack. 2. Align the chassis inner rails with the front of the out rails on the[...]

Chapter 2: Server Installation 2-9 Installing the Chassis into a T elco rack T o install the chassis into a T elco or post-style rack, use two L-shaped brackets on either side of the chassis (four total). 1. First, determine how far follow the server will extend out the front of the rack. Larger chassis should be positioned to balance the weight be[...]

2-10 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Figure 2-6. Installing the Chassis into a T elco Rack Note: fi gures are for illustrative purposes only . Always install servers to the bottom of a rack fi rst.[...]

Chapter 3: System Interface 3-1 Chapter 3 System Interface 3-1 Overview There are several LEDs on the control panel and on the drive carriers that provide system and component status for the server . This chapter explains the meanings of all LED indicators and the appropriate responses that need to be taken. 3-2 Control Panel Buttons There are two [...]

3-2 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual UID Depressing the UID (Unit Identi fi er) button illuminates an LED on both the front and rear of the chassis for easy system location in large stack con fi gurations. The LED will remain on until the button is pushed a second time. Another UID button on the rear of the chassis serves[...]

Chapter 3: System Interface 3-3 HDD Indicates SAS/SA T A channel activity and/or DVD-ROM drive activity when fl ashing. NIC2 Indicates network activity on GLAN2 when fl ashing. NIC1 Indicates network activity on GLAN1 when fl ashing. Power Indicates power is being supplied to the system's power supply units. This LED should normally be illu[...]

3-4 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual 3-4 Hard Drive Carrier LEDs The SC1 16AC chassis supports the use of 10 SAS/SA T A drives. SAS/SA T A Drives Each SAS/SA T A drive carrier has two LEDs. • Blue: Each hard drive carrier has a blue LED. When illuminated, this blue LED (on the front of the hard drive carrier) indicates dr[...]

4-1 Chapter 4: W arning Statements for AC Systems Chapter 4 Standardized W arning Statements for AC Systems 4-1 About Standardized W arning Statements The following statements are industry standard warnings, provided to warn the user of situations which have the potential for bodily injury . Should you have questions or experience difficulty , cont[...]

4-2 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual W arnung WICHTIGE SICHERHEITSHINWEISE Dieses W arnsymbol bedeutet Gefahr . Sie be fi nden sich in einer Situation, die zu V erletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen V erfahren zur V orbeugung vor Un[...]

4-3 W arning Statements for AC Systems 안전을 위한 주의사항 경고! 이 경고 기호는 위험이 있음을 알려 줍니다. 작업자의 신체에 부상을 야기 할 수 있는 상태에 있게 됩니다. 모든 장비에 대한 작업을 수행하기 전에 전기회로와 관련된 위험요소들을 확인하시고 사전에 사고[...]

4-4 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Installation Instructions W arning! Read the installation instructions before connecting the system to the power source. W arnung V or dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. ¡Advertencia! Lea las instrucciones de instalación antes de conecta[...]

4-5 Chapter 4: W arning Statements for AC Systems Circuit Breaker W arning! This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 250 V , 20 A. サーキ ッ ト ・ ブレ ーカー この 製 品 は 、 短絡 （過電流） 保護装置 ?[...]

4-6 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Power Disconnection W arning 電源切断の警告 システムコン ポ ー ネン トの 取り 付 けまた は 取り 外し の た め に 、 シ ャ ー シー内部に ア ク セ ス する に は 、 シ ステムの 電 源 はす べ てのソ ー ス から 切 断され[...]

4-7 Chapter 4: W arning Statements for AC Systems ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasis para instalar o para quitar componentes de sistema. Attention Le système doit être débranché de [...]

4-8 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Equipment Installation 機器の設置 ト レー ニ ン グを受 け認定さ れた人だけが こ の 装 置の 設 置、 交換、 ま たはサー ビ スを許 可 されて いま す 。 W arning! Only trained and quali fi ed personnel should be allowed to install, replace,[...]

4-9 Chapter 4: W arning Statements for AC Systems ア ク セ ス 制限区域 この ユ ニ ッ ト は 、 ア ク セ ス制限区域 に 設置 さ れ る こ と を想定 し て い ま す 。 ア ク セ ス 制限区域は 、 特別な ツ ール 、 鍵と 錠 前 、 そ の他のセ キ ュ リ テ ィ の手段を 用い て の ?[...]

4-10 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Battery Handling W arning! There is the danger of explosion if the battery is replaced incorrectly . Replace the battery only with the same or equivalent type recommended by the manufacturer . Dispose of used batteries according to the manufacturer's instructions תלבגומ הש?[...]

4-1 1 Chapter 4: W arning Statements for AC Systems W arnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr . Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers. Attention Danger d'explosion si la pile n'es[...]

4-12 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual W arnung Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein trom zugeführt wird, müssen alle V erbindungen entfernt werden. ¡Advertencia! Puede que esta unidad tenga más de una conexión para fuentes de alimentación. Para cortar por comple[...]

4-13 Chapter 4: W arning Statements for AC Systems Backplane V oltage バ ッ ク プ レー ンの 電圧 シ ス テ ムの稼働 中は危 険な電圧 ま た は電 力が、 バッ ク プレ ーン上 にか かっ ていま す 。 修理す る 際に は注意 く だ さ い 。 警告 当系统正在进行时，背板上有很危险的?[...]

4-14 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Comply with Local and National Electrical Codes W arning! Installation of the equipment must comply with local and national electrical codes. 地方お よ び国 の電気規格に 準拠 機器の取 り 付け は そ の地方お よ び国 の電気規格に 準拠す る 必要が[...]

4-15 Chapter 4: W arning Statements for AC Systems Product Disposal W arning! Ultimate disposal of this product should be handled according to all national laws and regulations. יצראה למשחה יקוח םואית ! הרהזא תנקתה םייצראהו םיימוקמה למשחה יקוחל תמאות תויהל תבייח דויצה . ﺕ?[...]

4-16 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual W aarschuwing De uiteindelijke verwijdering van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. Attention La mise au rebut ou le [...]

4-17 Chapter 4: W arning Statements for AC Systems W arnung Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger , Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt. ¡Advertencia! Los ventiladores podran dar vuelta cuando usted quite ell montaje del ve[...]

4-18 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual W arning! When installing the product, use the provided or designated connection cables, power cables and AC adaptors. Using any other cables and adaptors could cause a malfunction or a fi re. Electrical Appliance and Material Safety Law prohibits the use of UL or CSA -certi fi ed cab[...]

4-19 Chapter 4: W arning Statements for AC Systems Attention Lors de l'installation du produit, utilisez les bables de connection fournis ou désigné. L'utilisation d'autres cables et adaptateurs peut provoquer un dysfonctionnement ou un incendie. Appareils électroménagers et de loi sur la sécurité Matériel interdit l'util[...]

4-20 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Notes[...]

Chapter 5: Advanced Serverboard Setup 5-1 Chapter 5 Advanced Serverboard Setup This chapter covers the steps required to connect the data and power cables and install add-on cards. All serverboard jumpers and connections are also described. A layout and quick reference chart are included in this chapter for your reference. Remember to completely cl[...]

5-2 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual 5-2 Connecting Cables Now that the serverboard is installed, the next step is to connect the cables to the board. These include the data cables for the peripherals and control panel and the power cables. Connecting Data Cables The cables used to transfer data from the peripheral devices [...]

Chapter 5: Advanced Serverboard Setup 5-3 Figure 5-1. Control Panel Header Pins 5-3 Rear I/O Ports See Figure 5-2 below for the colors and locations of the various I/O ports. Figure 5-2. Rear I/O Ports Rear I/O Ports 1 VGA Port 6 USB Port 3 2 USB Port 0 7 Gb LAN Port 1 3 USB Port 1 8 Gb LAN Port 2 4 Dedicated IPMI LAN Port 9 UID Switch 5 USB Port 2[...]

5-4 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual 1. There are two levers on the LGA201 1 socket. First press and release the load lever labeled 'Open 1st'. 2. Press the second load lever labeled 'Close 1st' to release the load plate from its locked position. Installing an LGA 201 1 Processor 5-4 Installing the Proce[...]

Chapter 5: Advanced Serverboard Setup 5-5 Gently push down to pop the load plate open. 3. With the lev er labeled 'Close 1 st ' f u l l y r e t r a ct e d , g e n tl y p u s h do w n on t he ' O pen 1st ' leve r to op en t he load plat e. Lift the load plat e to open it completely . 4. Usi ng you r thu mb an d th e ind ex fi ng[...]

5-6 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual 7. With the CPU in the socket, in- spect the four corners of the CPU to make sure that they are fl ush with the socket. 8. Close the load plate. Use your thumb to gently push the lever labeled 'Close 1st' then the lever labeled 'Open 1st' down until they lock. 9. Rep[...]

Chapter 5: Advanced Serverboard Setup 5-7 Figure 5-3. Installing the Heatsinks Figure 5-4. Securing a Heatsink Note: be aware that the heatsink for CPU1 must be installed in the correct orien- tation: the air tunnel must be on the right side when viewed from the front of the system. (Above fi gure shows heatsink viewed from the rear .) Loosen scre[...]

5-8 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Memory Support The X9DRW -CF31/CTF31 supports up to 1024 GB of ECC Load-Reduced (LRDIMM), up to 512 GB of ECC Registered (RDIMM) or up to 128 GB of ECC/ non-ECC unbuffered (UDIMM) DDR3-1866/1600/1333/1066/800 SDRAM in 16 DIMM sockets. DIMM Installation Installing Memory Modules 1. Insert[...]

Chapter 5: Advanced Serverboard Setup 5-9 DIMM Module Popu lation T able Follo w the tables belo w when installing memor y . Processors and their Corresponding Memory Modules CPU# Corresponding DIMM Modules CPU 1 P1- DIMMA1 P1- DIMMA2 P1- DIMMB1 P1- DIMMB2 P1- DIMMC1 P1- DIMMC2 P1- DIMMD1 P1- DIMMD2 CPU2 P2- DIMME1 P2- DIMME2 P2- DIMMF1 P2- DIMMF2 [...]

5-10 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Notes: Using DDR3 DIMMs with different operating frequencies is not allowed. All channels in a system will run at the lowest common frequency . Du e to me mo r y al loc at io n to sys tem dev ic es, the a mou nt of me mo r y th at rem ain s avail abl e for o pe rati on al us e wil l be [...]

Chapter 5: Advanced Serverboard Setup 5-1 1 5-6 Adding PCI Add-On Cards The 1027R-WC1R/1027R-WC1RT can accommodate two full-height, half-length PCI-E 3.0 x16 pro fi le add-on (expansion) card installed to the riser card included in the system. Installing an Add-on Card 1. Begin by removing the shield located by the riser card. 2. Fully seat the ca[...]

5-12 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Figure 5-6. X9DRW -CF31/CTF31 Layout 5-7 Serverboard Details Notes • " " indicates the location of "Pin 1". • Jumpers not indicated are for test purposes only . X9DRW -CF31/CTF31 Quick Reference LED Description State Status DM1 BM C Green: Blinking Normal LED2 Po[...]

Chapter 5: Advanced Serverboard Setup 5-13 Jumper Description Default Setting JBT1 Clear CMOS See Section 5-9 JI 2 C1/JI 2 C2 SMB to PCI-E Slots Pins 2-3 (Normal) JPB1 BMC Enable/Disable Pins 1-2 (Enabled) JPG1 VGA Enable/Disable Pins 1-2 (Enabled) JPL1 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled) JPME1 Management Engine (ME) Re- covery Mode Enable/[...]

5-14 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Reset Button The Reset Button connection is located on pins 3 and 4 of JF1 and attaches to the reset switch on the computer chassis. See the table on the right for pin de fi nitions. Power Button The Power On connection is on pins 1 and 2 of JF1. These should be connected to the chassi[...]

Chapter 5: Advanced Serverboard Setup 5-15 Overheat (OH)/Fan Fail/PWR Fail/ UID LED Co nn ec t an LED c a ble t o pin s 7 and 8 of Front C ont ro l Pane l to use t he Overheat /Fan F ail/Power F ail and UI D LED c on ne ct io ns. T he Red L ED on p in 7 pr ovi des wa r ning s of over- heat , fa n fai lure o r powe r fai lure. T he Bl ue LED o n pin[...]

5-16 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Fan Headers There are six fan headers on the serverboard, all of which are 4 - pin fan s (Fan 1-Fan 8). Pins 1- 3 of t he fan h eade rs a re bac k war d co mpat ible wit h th e tr adit ion al 3 - p in fa ns. (Fan spe ed c ont ro l is su ppo r te d wit h 4 - pi n fan s on ly . ) S ee t h[...]

Chapter 5: Advanced Serverboard Setup 5-17 Ethernet Ports T wo Ethernet ports are located on the I/O backplane. LAN ports 1/2 support gigabit LAN connections on the C9DRW -CF31, and support 10 Gigabit LAN connections on the X9DRW -CTF31. In addition, an IPMI_ Dedicated LAN, located above USB 0/1 ports on the backplane, provides KVM support for IPMI[...]

5-18 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual T -SGPIO Header The SGPIO (Serial General Purpose Input/Output) header is used to com- municate with the enclosure manage- ment chip on the backplane. See the table on the right for pin de fi nitions. T -SGPIO Header Pin De fi nitions Pin# De fi nition Pin De fi nition 1N C 2 N C 3 [...]

Chapter 5: Advanced Serverboard Setup 5-19 DOM Power Connector A power connector for SA T A DOM (Disk On Module) devices is located at JSD1. Connect an appropriate cable here to provide power support for your DOM devices. DOM PWR Pin De fi nitions Pin# De fi nition 1 +5V 2 Ground 3 Ground Power Supply SMBus I 2 C Header The power System Managemen[...]

5-20 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Standby Power Header The +5V Standby Power header is lo- cated at JSTBY1. See the table on the right for pin de fi nitions. (Y ou must also have a card with a Standby Power con- nector and a cable to use this feature.) Standby PWR Pin De fi nitions Pin# De fi nition 1 +5V Standby 2 G[...]

Chapter 5: Advanced Serverboard Setup 5-21 CMOS Clear JBT1 is used to clear CMOS (which will also clear any passwords). Instead of pins, this jumper consists of contact pads to prevent accidentally clearing the contents of CMOS. T o clear CMOS, 1. First power down the system and unplug the power cord(s). 2. With the power disconnected, short the CM[...]

5-22 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual BMC Enable Jumper JPB1 allows you to enable the embedded the Winbond WPCM 450 BMC (Baseboard Management Controller) to provide IPMI 2.0/KVM support. See the table on the right for jumper settings. BMC Enable Jumper Settings Jumper Setting De fi nition Pins 1-2 BMC Enabled Pins 2-3 Disa[...]

Chapter 5: Advanced Serverboard Setup 5-23 5-10 Onboard Indicators LAN LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each port, the yellow LED fl ashes to indi- cate activity while the other LED may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associ- ated wi[...]

5-24 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual 5-1 1 SA T A and SAS Ports SA T A Port Pin De fi nitions Pin# De fi nition Pin De fi nition 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground Serial A T A Ports Th ere a re fo ur Se ri al A T A Po r t s ( I-SA T A 0~I-SA T A3 ) lo ca t ed on th e ser verboard. I- SA T A0/ 1 suppor t[...]

Chapter 5: Advanced Serverboard Setup 5-25 5-12 Installing Software The Supermicro ftp site contains drivers and utilities for your system at ftp://ftp. supermicro.com . Some of these must be installed, such as the chipset driver . After accessing the ftp site, go into the CDR_Images directory and locate the ISO fi le for your serverboard. Downloa[...]

5-26 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual SuperDoctor® 5 The Supermicro SuperDoctor 5 is a program that functions in a command-line or web-based interface in Windows and Linux operating systems. The program moni- tors system health information such as CPU temperature, system voltages, system power consumption, fan speed, and p[...]

Chapter 5: Advanced Serverboard Setup 5-27 5-13 Onboard Battery Please handle used batteries carefully . Do not damage the battery in any way; a damaged battery may release hazardous materials into the environment. Do not discard a used battery in the garbage or a public land fi ll. Please comply with the regulations set up by your local hazardous[...]

5-28 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Notes[...]

Chapter 6: Advanced Chassis Setup 6-1 Chapter 6 Advanced Chassis Setup This chapter covers the steps required to install components and perform mainte- nance on the SC1 16AC-R700WB chassis. For component installation, follow the steps in the order given to eliminate the most common problems encountered. If some steps are unnecessary , skip ahead to[...]

6-2 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Figure 6-1. Front and Rear Chassis Views 6-2 Control Panel The control panel (located on the front of the chassis) must be connected to the JF1 connector on the serverboard to provide you with system status indications. A ribbon cable has bundled these wires together to simplify the conn[...]

Chapter 6: Advanced Chassis Setup 6-3 6-3 System Fans It is very important that the chassis top cover is properly installed and making a good seal in order for the cooling air to circulate properly through the chassis and cool the components. See Figure 6-2. The system chassis contains six 4-cm counter-rotating fans. Each fan unit is actu- ally mad[...]

6-4 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Figure 6-2. Replacing a System Fan 1 3[...]

Chapter 6: Advanced Chassis Setup 6-5 Checking the Air fl ow Check the Air fl ow 1. Make sure there are no objects obstructing the air fl ow in and out of the server . In addition, if you are using a front bezel, make sure the bezel's fi lter is replaced periodically . 2. Do not operate the server without hard drives or drive carriers in t[...]

6-6 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual 4. Insert the drive carrier into its bay , keeping the carrier oriented so that the hard drive is on the top of the carrier and the release button is on the right side. When the carrier reaches the rear of the bay , the release handle will retract. 5. Push the handle in until it clicks i[...]

Chapter 6: Advanced Chassis Setup 6-7 Figure 6-4. Removing a Hard Drive 1 1 1 2 Caution: Use caution when working around the hard drive backplane. Do not touch the backplane with any metal objects and make sure no ribbon cables touch the backplane or obstruct the holes, which aid in proper air fl ow .[...]

6-8 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual 6-5 Power Supply The SC1 16 chassis comes equipped with two redundant 700W -750W power sup- plies. These power supplies are auto-switching capable and automatically sense and operate at a 100v to 240v input voltage. An amber light will be illuminated on the power supply when the power is[...]

Chapter 7: BIOS 7-1 Chapter 7 BIOS 7-1 Introduction This chapter describes the AMI BIOS setup utility for the X9DRW -CF31/X9DRW- CTF31. It also provides the instructions on how to navigate the AMI BIOS setup utility screens. The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. Starting BIOS Setup Utility T o enter the AMI BIOS se[...]

7-2 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual 7-2 Main Setup When you fi rst enter the AMI BIOS setup utility , you will enter the Main setup screen. Y ou can always return to the Main setup screen by selecting the Main tab on the top of the screen. The Main BIOS Setup screen is shown below . The AMI BIOS main menu displays the fol[...]

Chapter 7: BIOS 7-3 7-3 Advanced Setup Con fi gurations Use the arrow keys to select Advanced Setup and press <Enter> to access the following submenu items.  Boot Features Quiet Boot Use this feature to select bootup screen display between POST messages and the OEM logo. Select Disabled to display the POST messages. Select Enabled to disp[...]

7-4 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk feature. When this item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup and allow the drives that are attached to these host adaptors to function as[...]

Chapter 7: BIOS 7-5 • T ype of CPU • CPU Signature • Microcode Patch • CPU Stepping • Maximum CPU Speed • Minimum CPU Speed • Processor Cores • Intel HT (Hyper-Threading) T echnology • Intel VT -x T echnology • Intel SMX T echnology • L1 Data Cache • L1 Code Cache • L2 Cache • L3 Cache CPU Speed This item displays the sp[...]

7-6 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual applications that rely on direct access to the system memory . The options are Optimal and Alternate. Hyper-threading Select Enabled to support Intel Hyper-threading T echnology to enhance CPU per- formance. The options are Enabled and Disabled. Active Processor Cores Set to Enabled to u[...]

Chapter 7: BIOS 7-7 DCU IP Prefetcher Select Enabled for DCU (Data Cache Unit) IP Prefetcher support, which will prefetch IP addresses to improve network connectivity and system performance. The options are Enabled and Disabled. Intel® Virtualization T echnology (A vailable when supported by the CPU) Se lec t Ena ble d to sup po r t Inte l' s[...]

7-8 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual C1E (A vailable when Power T echnology is set to Custom) Select Enabled to enable Enhanced C1 Power State to maximize energy ef fi ciency . The options are Enabled and Disabled. CPU C3 Report (A vailable when Power T echnology is set to Custom) Select Enabled to allow the BIOS to report[...]

Chapter 7: BIOS 7-9 Long Duration Maintained This item displays the period of time in seconds during which long duration power is maintained. Recommended Short Duration Power This item displays the short duration power settings recommended by the manufacturer . Short Duration Power Limit This item displays the time period during which short duratio[...]

7-10 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual DCA Support Select Enabled to use Intel's DCA (Direct Cache Access) T echnology to improve data transfer ef fi ciency . The options are Disabled and Enabled . MMCFG (Memory Mapped Con fi guration) BASE This item allows the user to set the default PCI MMIO base address. The lower [...]

Chapter 7: BIOS 7-1 1 MesegEn Select Enabled for Message support. The options are Enabled and Disabled . QPI (Quick Path Interconnect) Link Speed Mode Use this feature to select data transfer speed for QPI Link connections. The options are Fast and Slow . QPI Link Frequency Select Use this feature to select the desired QPI frequency . The options a[...]

7-12 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual CPU Socket 2 DIMM Information P2-DIMME1/P2-DIMME2/P2-DIMMF1/P2-DIMMF2/P2-DIMMG1/P2-DIMMG2/ P2-DIMMH1/P2-DIMMH2 Memory Mode When Independent is selected, all DIMMs are available to the operating system. When Mirroring is selected, the motherboard maintains two identical copies of all dat[...]

Chapter 7: BIOS 7-13 source). Memory is updated as well. Select Enabled to use Demand Scrubbing for ECC memory correction. The options are Enabled and Disabled. Data Scrambling Select Enabled to enable data scrubbing to ensure data security and integrity . The options are Enabled and Disabled. Device T agging Select Enabled to support device taggin[...]

7-14 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Select Enabled to support legacy USB devices. Select Auto to disable legacy sup- port if USB devices are not present. Select Disable to have USB devices available for EFI (Extensive Firmware Interface) applications only . The settings are Disabled, Enabled and Auto. Port 60/64 Emulation[...]

Chapter 7: BIOS 7-15 Port 0~3 Hot Plu g Select Enabled to enable hot-plug support for a particular port, which will allow the user to change a hardware component or device without shutting down the system. The options are Enabled and Disabled . Port 0~3 Staggered Spin Up Select Enabled to enable Staggered Spin-up support to prevent excessive power [...]

7-16 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Maximum Read Request Select Auto to allow the system BIOS to automatically set the maximum Read Request size for a PCI-E device to enhance system performance. The options are Auto , 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes. ASPM Support This feature allows[...]

Chapter 7: BIOS 7-17  COM Con fi guration Serial Port Select Enabled to enable a serial port speci fi ed by the user . The options are En- abled and Disabled. Device Settings This feature indicates whether or not a reset is required for the serial port speci- fi ed by the user . Change Settings This option speci fi es the base I/O port addre[...]

7-18 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Serial Port 2 Attribute Use this feature to select the attribute for serial port 2. The options are SOL (Serial- Over-LAN), and COM.  Serial Port Console Redirection • COM 1 and SOL These two submenus allow the user to con fi gure the following Console Redirection settings for a C[...]

Chapter 7: BIOS 7-19 is odd. Select None if you do not want to send a parity bit with your data bits in transmission. Select Mark to add a mark as a parity bit to be sent along with the data bits. Select Space to add a Space as a parity bit to be sent with your data bits. The options are None , Even, Odd, Mark and Space. Stop Bits A stop bit indica[...]

7-20 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual disabled before the OS is initialized. When this feature is set to Always Enable, Legacy Console Redirection remains enabled during OS bootup. The options are Always Enable and Bootloader .  Serial Port for Out-of-Band Management/Windows Emergency Management Services (EMS) The submen[...]

Chapter 7: BIOS 7-21 Data Bits, Parity , Stop Bits The status of these features is displayed.  ACPI Setting Use this feature to con fi gure Advanced Con fi guration and Power Interface (ACPI) power management settings for your system. ACPI Sleep State Use this feature to select the ACPI State when the system is in the sleep mode. Select S1 (CP[...]

7-22 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Pending Operation: This item displays the status of a pending operation. Current Status Information: This item displays the information regarding the current TPM status. TPM Enable Status This item displays the status of TPM Support to indicate if TPM is currently enabled or disabled. T[...]

Chapter 7: BIOS 7-23  Intel ME Subsystem Con fi guration This feature displays the following ME Subsystem Con fi guration settings. • ME BIOS Interface V ersion • ME V ersion 7-4 E vent Logs Use this feature to con fi gure Event Log settings.  Change SMBIOS Event Log Settings This feature allows the user to con fi gure SMBIOS Event se[...]

7-24 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Memory Correctable Error Threshold This feature allows the user to enter the threshold value for correctable memory errors. The default setting is 10 . PCI Error Logging Support Select Enabled to support error event logging for PCI slots. The options are Enabled and Disabled . Erasing S[...]

Chapter 7: BIOS 7-25 7-5 IPMI Use this feature to con fi gure Intelligent Platform Management Interface (IPMI) settings. IPMI Firmware Revision This item indicates the IPMI fi rmware revision used in your system. IPMI Status This item indicates the status of the IPMI fi rmware installed in your system.  System Event Log Enabling/Disabling Opt[...]

7-26 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual When SEL is Full This feature allows the user to decide what the BIOS should do when the system event log is full. Select Erase Immediately to erase all events in the log when the system event log is full. The options are Do Nothing and Erase Immediately . Note : After making changes on[...]

Chapter 7: BIOS 7-27 7-6 Boot Th is sub men u all ows t he us er to c on fi gure t he f oll owi ng b oot set t in gs fo r the syst em. Set Boot Priorit y Use t he se ite ms to s pe ci f y th e seq uen ce o f bo ot devi ce p ri or it y f or t he fo llo win g drives. • 1s t B o o t D ev i c e • 2nd B oot Dev ic e • 3rd Boo t De vice • 4th B [...]

7-28 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual  Network Device BBS Priorities This item is used to select the boot device priority sequence from available network devices. • 1s t D e v i c e  UEFI Boot Drive BBS Priorities This item is used to select the boot device priority sequence from available UEFI devices. • 1s t B o[...]

Chapter 7: BIOS 7-29 7-8 Sav e & E xit Th is sub men u all ows t he us er to c on fi gu re t he Save a nd E xi t set t ing s fo r the syst em. Discard Changes and Exit Select this option to exit the BIOS Setup without making any permanent changes to the system con fi guration, and reboot the computer . Select Discard Changes and Exit, and pre[...]

7-30 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Discard Changes Select this feature and press <Enter> to discard all the changes and return to the BIOS setup. When the dialog box appears, asking you if you want to load previ- ous values, click Ye s to load the values previous saved, or click No to keep the changes you've m[...]

A-1 Appendix A: BIOS POST Error Codes BIOS Error Beep Codes Beep Code/LED Error Message Description 1 beep Refresh Ready to boot 5 short beeps + 1 long beep Memory error No memory detected in the system 5 beeps No Con-In or No Con-Out devices Con-In: USB or PS/2 key- board, PCI or Serial Console Redirection, IPMI KVM or SOL Con-Out: Video Controlle[...]

A-2 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual Notes[...]

B-1 Appendix B: System Speci fi cations Appendix B System Speci fi cations Processors Single or dual Intel® Xeon E5-2600 v1/v2 Series processors Note: Please refer to our web site for a complete listing of supported processors. Chipset Intel C602J chipset BIOS 16 MB AMI® SPI Flash ROM Memory Capacity Si x teen D IM M s oc kets sup po r t ing up[...]

B-2 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual System Cooling Six 4-cm counter-rotating fans System Input Requirements AC Input V oltage: 100V - 240V AC auto-range Rated Input Current: 8.5A - 6A max Rated Input Frequency: 50 to 60 Hz Power Supply Rated Output Power: 700W-750W (Part# PWS-704P-1R) Rated Output V oltages: +3.3V (25A), +[...]

B-3 Appendix B: System Speci fi cations Notes[...]

B-4 S UPER S ERVER 1027R-WC1R/1027R-WC1R T User's Manual (continued from front) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency com- munication devices or other critical systems whose failure to pe[...]