Suunto X6m manuale d’uso

EN[...]

[...]

1 Suunto X6/X6 m USER’S GUIDE EN[...]

2 T ABLE OF CONTENTS 1. GENERAL INFORMA TION ...................................................................................... 5 1.1. Care and Maintenance .......................................................................... 5 1.2. W ater Resistance .................................................................................. 6 1.3. [...]

3 3.2.4. Date ........................................................................................ 19 3.2.5. General ................................................................................... 20 3.2.6. Units ....................................................................................... 22 3.3. Compass Mode ....................[...]

4 3.6.6. Effect of air temperature on altitude measurement ................ 46 4. ADDITIONAL FEA TURES .....................................................................................50 4.1. PC Interface ........................................................................................ 50 4.1.1. T ransferring Data .......................[...]

5 1. GENERAL INFORMA TION The Suunto X6/X6M Wristo p Computer is a reliable high-pr ecision electronic instrument that is intended for recreational use. Outdoor enthusiasts who enjoy sports such as mountain climbing, hiking and biking can rely on the Suunto X6/X6M’s accuracy . NOTE: The Suunto X6/X6M should not be substituted for obtaining measur[...]

6 1.2. W A TER RESIST ANCE Suun to X6/X6 M is water -resi stan t. Its water resis tanc e is teste d to 100m/3 30ft accordi ng to ISO 2281 standard (www .iso.ch). This means that you can use your Suunto X6/X6M for swimming and other water sports activities but it must not be used for scuba diving or freediving. T o maintain water resistance and to e[...]

7 REPLACING THE BA TTERY Make sure that you have purchased an original Suunto battery kit (including battery and battery lid with installed O-ring) before you start replacing the battery . 1. Insert a coin into the slot or a Suunto battery-opening coin into the slot or holes located in the battery compartment cover on the backside of your device. 2[...]

8 4. Carefully clean the inside sealing surface of the battery compartment before placing your new battery in the compartment. 5. Place the new battery into the battery compartment with the positive side facing up. Gently slide the battery underneath the contact plate, ensuring that the contact plate does not break or bend out of place. 6. Place th[...]

9 If it is not possible to contact your Suunto dealer , contact your local Suunto distributor for further information. Y ou can locate your local Suunto distributor from www .suunto. com. 2. HOW TO USE YOUR SUUNT O X6/X6M 2.1. DISPLA Y When your Suunto X6/X6M leaves the factory , it is in sleep mode, with the display empty . Press any button to act[...]

10 2.1.2. Function Symbols The function symbols indicate that either a function has been activated (such as Alarm) or something needs to be done (battery symbol). The function symbols are: Alarm Active, when at least one of the alarms is on. Weather/Altitude alarm Active, when weather alarm, altitude alarm or asc/dsc alarm is on. Logbook Active, wh[...]

1 1 2.2. BUTTONS 2.2.1. Short and Long Press The buttons may have different functions depending on how long you press them. The ordinary press or short press means that the button is pressed quickly . The long press means that the button is pressed for more than 2 seconds. 2.2.2. Start Button Short press • In Chrono mode, it starts timing and rec[...]

12 • In the Chrono mode, it stops timing. • In the main displays, it acts as a shortcut button, that toggles the lowest field of the main display between three dif ferent alternatives. The selection stays active even if the mode or menu level is changed. Long press • Returns to the main display of the current mode without accepting the last s[...]

13 the value. • With two possible selections (e.g. light On/Off), both arrows change the value. 2.2.6. Button Lock The button lock prevents you from pushing the buttons. If the button lock is activated and you try to press a button, the message “ unlock press suunto ” is displayed. Activating the button lock T o activate the button lock: 1. P[...]

14 2.3.2. Navigating in Menus Y ou can scroll the menu items with the up and down arrow buttons on the right side of the Suunto X6/X6M. Three menu items are displayed at the same time. The menu item that is currently active and can thus be selected is displayed in reversed color . On the right side of the display is an indicator bar showing the tot[...]

15 3. MODES 3.1. GENERAL INFORMA TION Suunto X6/X6M has five modes: T ime, Compass, Weather , Hiking and Hiking Chrono. The symbols for each mode are displayed on the left of the Suunto X6/X6M display . When you select a mode, the active mode indicator appears on the display next to the symbol of the selected mode. If the icons are set to on , they[...]

16 3.2. TIME MODE 3.2.1. Main Display When you select the T ime mode, the main display opens. The main display has three rows: Date The first row displays the date in the selected format. For more information about changing the date format, refer to chapter 3.2.6. Time The second row displays the time in the selected format. For more information ab[...]

17 Activating alarms T o activate an alarm: 1. In the Function menu, Alarm is already as the first menu item. Select it by pressing Suunto . The alarm menu displays the status of the alarms. When you open the menu for the first time the alarm indicators are set to off as default. 2. Scroll to the alarm you want to set and press Suunto . The alarm i[...]

18 Deactivating alarms T o deactivate the alarm: 1. In the Function menu, scroll to Alarm and press Suunto . 2. Scroll to the alarm you want to set off and press Suunto . The alarm information is displayed and the On/Off indicator is activated. 3. Pre ss either the up or down button to change the alarm status to off and press Suunto . The alarm sym[...]

19 NOTE: If the time is displayed as a 12-hour clock, the symbol AM or PM is displayed on the last row . For more information about the 12/24-hour clock, refer to chapter 3.2.6. 4. Change the minutes with the arrow buttons and press Suunto . The second selection is activated. 5. When you press the arrow down button, the seconds are zeroed. If you w[...]

20 NOTE: The weekday is updated automatically on the last row according to the set date. 3.2.5. General The General function includes the general settings for using your Suunto X6/X6M. Setting the tones T ones are the sounds that indicate that you have successfully pressed the buttons. The tones can be set on or off. T o set the tones: 1. In the Fu[...]

21 Setting the backlight Light is the backlight of the Suunto X6/X6M display . Light has three possible settings: • Normal: The light goes on when you press Start for more than 2 seconds in any other mode than the Chrono mode. The light is on for 5 seconds after the last press of any button. NOTE: If the backlight setting is normal and you press [...]

22 set the value by 0,1 hPa or 0,01 inHg steps. The reference value should be measured with at least the same accuracy . If you are uncertain, contact the Suunto technical service before changing the calibration. T o change the pressure sensor calibration: 1. In the Function menu, scroll to General and press Suunto . The General menu is displayed. [...]

23 Setting the date format The Date setting defin es the forma t in which the date is displayed. The possible formats are: • DD.MM: Day before the month, e.g. 27.1 1. • MM.DD: Month before the day , e.g. 1 1.27. • Day: Only the day is displayed, e.g. 27. T o change the date format: 1. In the Function menu, scroll to Units and press Suunto . T[...]

24 T o change the air pressure unit: 1. In the Function menu, scroll to Units and press Suunto . The Units menu is displayed. 2. Scroll to Pres and press Suunto . The air pressure unit field is activated. 3. Select the correct unit with the arrow buttons and press Suunto . The unit of the air pressure is set. Setting the elevation unit The Elev set[...]

25 T o change the Asc/Dsc format: 1. In the Function menu, scroll to Units and press Suunto . The Units menu is displayed. 2. Scroll to Asc/Dsc and press Suunto . 3. Select the correct format with the arrow buttons and press Suunto . The format is set and you return to the Units menu. 3.3. COMP ASS MODE 3.3.1. Main Display When you select the Compa[...]

26 Shortcuts The third row contains shortcuts to three functions. T o change the function, press Stop/CL . • Altitude: In Alti use, it displays the current altitude, and in Baro use, it displays the reference altitude. For more information about the Alti and Baro uses, see section 3.3.2. • Bearing tracking: Bearing tracking helps you to follow [...]

27 When the Alti use is selected, the altitude reading of Compass, Hiking and Hiking Chrono modes changes, but the atmospheric pressure (sea level) in the second row of the Weather mode remains constant. The absolute pressure changes if it is selected as a shortcut on the third row of the Weather mode. If you select Baro (barometer), the measured a[...]

28 corresponds to the standard barometric pressure (1013hPa/29.90inHg) at sea level. If you do not know your current altitude or the correct sea level press ure, you can have an estimate of your altitude by setting the sea level pressure to 1013 hPa/29.90 inHg. In the Weather mode, Altitude is replaced with Sealevel , this functions and is set in t[...]

29 Y ou should also calibrate the compass before a long trip. NOTE: Calibrate the compass before using it for the first time. NOTE: Remember to hold the Suunto X6/X6M level during the calibration. T o calibrate the compass: 1. In the Function menu, scroll to Compass with the arrow buttons and press Suunto . 2. In the compass menu, move to Calib wit[...]

30 Setting the compass declination Y ou can compensate for the difference between true no rth and magnetic north by adjusting the compass declination. The declination can be found, for example, from the topographic maps of your local area. T o set the compass declination: 1. In the Function menu, scroll to Compass with the arrow buttons and press S[...]

31 Air pressure The second row displays the air pressure at sea level. For more information about defining the air pressure unit, refer to chapter 3.2.6. Shortcuts The third row contains shortcuts to three functions. T o change the function, press Stop/CL . • T rend: A graphical presentation of the air pressure development (sea level) during the [...]

32 2. With the arrow buttons, set the sea level pressure in the field to match the current sea level barometric pressure of you current location and press Suunto . Y ou return to the Function menu. 3.4.4. Alarm When active, the weather alarm informs you if the air pressure drops more than 4 hPa/0,1 18 inHg in 3 hours. NOTE: The weather alarm activa[...]

33 NOTE: If the Use function has been set to Alti (altimeter), the barometric value stored in memory is always the same. T o view the weather information stored in the memory: 1. In the Function menu, scroll to Memory with the arrow buttons and press Suunto . The first information page is displayed. 2. Scroll the information with the arrow buttons?[...]

34 • Asc: The cumulative ascent since the logbook was started. If the logbook is not running, the display shows text “ asc 0 ”. • Differ: When you select the Differ function, it displays the difference in altitude and time since the last reset of the function. T o reset and start a new measurement, press Start . Differ is always in the meas[...]

35 2. In the Function menu, scroll to Logbook with the arrow buttons and press Suunto . 3. Scroll to Start and press Suunto . If the logbook is not running and there is enough memory left, recording begins. The message “ logbook st arted ” is displayed and you return to the Function menu. If the logbook is already activated, the message “ log[...]

36 T o view the log files: 1. In the Function menu, scroll to Logbook with the arrow buttons and press Suunto . 2. Scroll to View and press Suunto . A list of all the saved logbook files is displayed. 3. Scroll the list with the arrow buttons until the logbook file you want to view is active and press Suunto . The first display of the logbook file [...]

37 3. Scroll the list with the arrow buttons until the logbook file you want to erase is active and press Suunto . The Suunto X6/X6M displays the file and the text “ erase ? ”. 4. If you want to accept the deletion, press Suunto . Y ou return to the list of logbook files. 5. If you want to cancel the deletion, press Stop/CL . Y ou return to the[...]

38 Logbook marks Y ou can add marks to the logbook file and record the information about the altitude of a specific point and time. This can only be done in Hiking mode. The maximum number of marks in each file is 10. T o add a mark, short press Start when the logbook is running. A long press activates the backlight and no logbook mark is made. The[...]

39 NOTE: The alarms are functional only when the Use function is set to Alti. Setting altitude alarm T o set the altitude alarm: 1. In the Function menu, scroll to Alarms with the arrow buttons and press Suunto . The alarm menu is displayed. 2. Scroll to Altitude and press Suunto . The On/Of f field is activated. 3. Change the status of the alarm t[...]

40 3.6. HIKING CHRONO 3.6.1. Main Display When you select the Hiking Chrono mode, the main display opens. The main display has three rows. Altitude The first row displays the altitude in the selected unit. For more information about defining the altitude unit, refer to chapter 3.2.6. Stopwatch The second row displays the total time or the split tim[...]

41 information about erasing memory files, refer to chapter 3.6.2. Lap time The lap time means the time from the last press of Start , i.e. from the last intermediate time to the current time. The lap time runs on the third row . When you press Start , the lap time stops for 3 seconds to display the lap time and starts running from zero again (for [...]

42 • T otal descent and the average descent rate. • Highest point, time and date. • Lowest point, time and date. • T otal duration of the file and the amount of laps in the file. • More specific information about that file including altitude and ascent and descent rates on individual points according to recording interval, and graphical p[...]

43 Erasing memory les If the memory is full, you cannot start the timing until you have erased at least one memory file. T o erase a memory file: 1. In the Function menu, scroll to Memory with the arrow buttons and press Suunto . The memory menu is displayed. 2. Scroll to Erase and press Suunto . The list of memory files is displayed. In the fil[...]

44 The memory capacity is 33 h with 10 s recording interval and 200 h with 60 s interval. Free memory capacity in % is displayed in the Interval menu below the intervals with the text “ f ree …% ”. 3.6.3. Altitude With this function you can set the reference altitude. For more information about the reference altitude, refer to chapter 3.3.3. [...]

45 Stopping the reminder T o stop the reminder: 1. In the Function menu, scroll to Reminder with the arrow buttons and press Suunto . The Reminder menu is displayed, and if the reminder is active, the Stop field is displayed in reversed color . 2. Scroll to Stop and press Suunto . The message “ reminder stopped ” is displayed and you return to [...]

46 3.6.6. Effect of air temperature on altitude measurement The atmospheric pressure means the weight of air mass above the observer: at a higher altitude there is less air than at a lower altitude. The principle of an altimeter is to measure the different air pressure between dif ferent altitudes.[...]

47 T able 1. Normal temperatures corresponding to different altitudes Altitude (m) Altitude (ft) T emperature (ºC) T emperature (ºF) above sea level above sea level 0 0 15.0 59.0 200 656 13.7 56.7 400 1312 12.4 54.3 600 1969 1 1.1 52.0 800 2625 9.8 49.6 1000 3281 8.5 47.3 1200 3937 7.2 45.0 1400 4593 5.9 42.6 1600 5250 4.6 40.3 1800 5906 3.3 37.9[...]

48 The outside temper ature affect s the air weight. Consequen tly the air pressure differe nce between two altitudes is also dependant on temperature. The altitude calculation of Suunto X6/X6M is based on the air pressure at certain normal temperatures. Each altitude has a definitive normal temperature. The normal temperatures at each altitude are[...]

49 T able 2. Example using meters and Celsius Lower point Higher point Set reference altitude (real altitude) 1000 m Displayed altitude 3000 m Real outside temperature +17.5 ºC +6.5 ºC Normal (table) temperature +8.5 ºC -4.5 ºC T emperature offset (= real - normal) +9 ºC +1 1 ºC Sum of temperature offsets +9 ºC + +1 1 ºC = 20 ºC T able 3 s[...]

50 ➦ 4. ADDITIONAL FEA TURES 4.1. PC INTERF ACE With the PC Interface you can transfer and store the logs you have gathered with your Suunto X6/X6M to your PC. The logs can be either hiking logs stored in the Suunto X6/X6M logbook files, weather logs stored in the weather memory or chrono logs stored in the chrono memory . When the data has been [...]

51 When the cable is connected, open the Suunto Activity Manager (SAM). Click on the “Wristop” icon in the upper left corner of the SAM to open the data transfer window . Press the “Connect” button in the lower part of the window to transfer the list of the log files from the wristop computer to the SAM window . When you drag and drop the l[...]

52 store the logs—the hiking logs can be arranged in a different folder than the skiing logs. Y ou can also sort the logs, move them between folders and delete them or search the log information. It is even possible to upload them to the SuuntoSports.com site. Charts and Data Y ou can examine the log information by creating charts from it. The ch[...]

53 Changing Suunto X6/X6M Settings Y ou can change some Suunto X6/X6M settings with the Wristop Computer section of the Suunto Activity Manager . Y ou can change the following settings: • Asc/Dsc—select the used ascent/descent unit (m/s, m/min, m/h, ft/s, ft/min, ft/h). • Altitude—change the used altitude unit (m or ft). • Pressure —sel[...]

54 4.2.1. System Requirements SuuntoSports.com has the following system requirements: • Internet Connection • Modem: recommended 56k or faster • Browser: IE 4.0 or better , Netscape 4.7x or newer • Resolution: minimum 800 x 600, best viewed with 1024 x 768 4.2.2. SuuntoSports.com Sections SuuntoSports.com includes three sections all of whic[...]

55 My Suunto This section is meant for your personal information. Y ou can store information about yourself, your wristop computer , your sporting and training activities, etc. When you upload your personal logs to SuuntoSports.com with the Suunto Activity Manager , they are displayed in your personal information. Here you can also manage them and [...]

56 Sport Forums SuuntoSports.com has its own Sports Forum with pages for each Suunto sport. The basic features and functions are the same for all sports pages—sport-sp ecific news, bulletin boards and chat rooms. Users can also suggest links to sports-related sites and tips regarding the sport and equipment to be published on the site, or publish[...]

57 5. TECHNICAL DA T A General • Operating temperature -15 °C to +50 °C/+5°F to +120°F . • Storage temperature -30 °C to +60 °C/-22°F to +140°F . • Weight 54 g • W ater-resistant 100 m/330 ft (according to ISO 2281) • Mineral crystal glass • User-replaceable battery CR2032 • PC interface with serial connector • Extension str[...]

58 6. COPYRIGHT AND TRADEMARK NOTICE This publication and its contents are proprietary to Suunto Oy and are intended solely for the use of its clients to obtain knowledge and key information regarding the operation of Suunto X6/X6M products. Its contents shall not be used or distributed for any other purpose and/or otherwise communicated, disclosed[...]

59 8. LIMITS OF LIABILITY AND ISO 9001 COMPLIANCE If this product should fail due to defects in materials or workmanship, Suunto Oy will, at its sole option, repair or replace it with new or rebuilt parts, free of charge, for two (2) years from the date of its purchase. This warranty is extended only to the original purchaser and only covers failur[...]

COPYRIGHT This publication and its contents are propriet ary to Suunto Oy . Suunto, Wristop Computer , Suunto X6, Suunto X6 M and their logos are registered or unregistered trademarks of Suunto Oy . All right s reserved. While we have taken great care to ensure that information contained in this documentation is both comprehensive and accurate, no [...]

Suunto Oy 2/2002, 5/2006, 3/2007[...]