Tascam 322 manuale d’uso

» 322 Doub le A uto Re v erse Cassette Dec k O WNER’S MANU AL CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the pres- ence of important operating [...]

2 TASCAM 322 Important Safety Precautions DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. If nonetheless the mains plug is cut off, remove the fus[...]

TASCAM 322 3 CA UTION: … Read all of these Instructions. … Save these Instructions f or later use . … Follow all Warnings and Instructions marked on the audio equipment. 1) Read Instructions — All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions — The safety and operating instruct[...]

4 TASCAM 322 The T ASCAM 322 is a double auto re verse cassette deck primarily designed for continuous playback of background music or tape dubbing needs. A maximum of ten 322s can be hooked up to form a sequential play loop or to synchronize them, with one serving as the master/source machine and the others serving as the slav e/target machines, f[...]

TASCAM 322 5 General Guide to the Controls and Connectors[...]

6 TASCAM 322 1 PO WER s witch : T urns the unit on and of f. NO TE The equipment dra ws nominal nonoperating power from the A Coutlet with its POWER s witch in the OFF position. 2 Cassette Compartment : Opens upon pressing the EJECT button. 3 RTZ (Return-To-Zero) button : Fast-winds the tape to a zero reference point selected by pressing RESET . Y [...]

TASCAM 322 7 M DOLBY NR switch : Selects the Dolby B or C Noise Reduction system or defeats them. When listening to a recording, set this switch to the setting used for the original recording. Dolby noise reduction and HX Pro headroom extension manufactured under license from Dolby Laboratories Licensing Corporation. HX Pro originated by Bang &[...]

8 TASCAM 322 T DECK 2, INPUT and OUTPUT jacks : These jacks are independent from deck 1 all the time. NO TE These jacks are only oper ational when the INPUT/ OUTPUT s witch is set to the SEP ARA TE position. U DECK 1/COMMON, INPUT and OUTPUT jacks : When the INPUT/OUTPUT switch is set to COMMON, inputs to deck 1 are taken into deck 2 as well, and o[...]

TASCAM 322 9 Unless you use multiple 322s connected in series, set the OFF/SL V/MSTR switch to the left OFF position all the time. 1. Check to see that the source is connected to the DECK 1 INPUT connectors if you intend to record on deck 1 only or on deck 1 and deck 2 simul- taneously . Use the DECK 2 INPUT connectors if you intend to record on de[...]

10 TASCAM 322 When the tape on deck 1 records up to the end of the re verse side, the tape on deck 2 will start recording, stopping at its end of the re verse side. The signal connected to DECK 1 is automatically routed to DECK 2. The procedure is essentially the same for Recording on Either Deck, or Both at the Same T ime, except : “ The REV MOD[...]

TASCAM 322 11 9. T o stop dubbing in NORM mode and exit this mode, press ST OP on deck 2. In HIGH SPEED mode, you can press ST OP on either deck. 1. Connect the amp/speaker system to the OUTPUT connectors of the deck you intend to use. 2. Insert the tape into either deck 1 or 2. 3. Make the follo wing switch settings : “ REV MODE switch to Ä to [...]

12 TASCAM 322 CPS (Computer-controlled Program Search) autolocates the tape to the beginning of specific program materials. The tape will automatically start playing after completing autolocation. T o identify specific programs, CPS counts a blank space of about 4 scconds between programs. T o access a program on the other side of the tape, the R[...]

TASCAM 322 13 A maximum of ten (10) 322s can be interconnected to provide the follo wing possibilities : “ Sequential link play of multiple cassettes. “ Dubbing onto multipie cassettes simultaneously . “ Recording an external source onto multiple cassettes simultaneously . W ARNING : Mak e all conncctions with power of f. Each time one casset[...]

14 TASCAM 322 W ARNING : Mak e all connections with power of f. 1. Refer to the diagram abov e, and interconnect multiple 322s through the EXT CONTR OL OUT and IN and the CASCADE OUTPUT and DECK 1 INPUT connectors. 2. Switch on po wer to each 322. 3. Make the follo wing switch settings : “ OFF/SL V/MSTR switch to MSTR on one 322, and SL V on all [...]

TASCAM 322 15 9. T o start dubbing, press PLA Y on deck 2 of the master unit. Deck 2 of the master and all the slav e decks will go into Record mode, simultaneously . The target decks all configure themselv es to the Dolby system and the record le vel settings used when originally recording the source tape. Settings of the INPUT and REC B AL contr[...]

16 TASCAM 322 9. Adjust the INPUT control on deck 2 of the master so the meter reading is around 0 dB. Balance the left and right input le vels with the REC B AL control. 10. Set the DOLBY NR switch on deck 2 of the master to the desired position. All the slav e decks configure themselves to the le vel and balance on deck 2 of the master . Setting[...]

TASCAM 322 17 All heads and metal parts in the tape path must be cleaned after e very 6 hours of operation, or before starting and after ending a recording session. 1. Open the cassette compartment. 2. Using a good head cleaning fluid and a cotton swab, clean the heads and tape guides until the swab comes of f clean. W ipe of f an y e xcess cleani[...]

18 TASCAM 322 The follo wing messages are displayed on the tape counter when two or more 322s are in use, one serving as the master machine and the others as the slav e machines, and an error is detected : Prob lem P ossible Cause Solution Continuous record/pla y impossible REV MODE s witch set to Ä or ä . Set s witch to CONT . OFF/SL V/MSTR swit[...]

TASCAM 322 19 T ape : Compact cassette tape C-30/60/90 (Normal/High Position/Metal) T rack Format : 4-track, 2-channel Head Con fi guration : 4-track, 2-channel ; Record/repro combination rotary head (DECK 1 x1, DECK 2 x1, permally) Erase head (DECK 1 x1, DECK 2 x1, ferrite) Motor : DC serv o capstan motor (DECK 1 x1, DECK 2 x1) DC reel motor (DEC[...]

Block Diagram TEAC CORPORATION Phone: (0422) 52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: (323) 726-0303 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: 905-890-8008 Facsimile: 905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.A. De C.V Phone: 5-[...]