Tekkeon ET6000 manuale d’uso

ET6000 User Guide Handsfree Bluetooth ® Speakerphone et6000_ug_fnl 10/26/06 4:17 PM Page 1[...]

et6000_ug_fnl 10/26/06 4:17 PM Page 2[...]

USER GUIDE Contents Overview ..............................................................................................................................2 Getting Started ....................................................................................................................2 Unpacking ezSpeak .........................................[...]

2 Over view ezSpeak ™ by T ekkeon is a Bluetooth ® speakerphone with a digital display that gives you the freedom to cut loose from your Bluetooth mobile phone. With advanced features like stored number redial, last number redial and voice dialing, you can use ezSpeak to make and receive calls without ever touching your mobile phone. And, you ca[...]

3 USER GUIDE Getting to Know ezSpeak Digital Display Provides caller ID, call status, indication of device connection, volume level, and low battery indication Power/End Call Button Used to turn on/off ezSpeak, reject calls and end calls Microphone Answer Button Used to initiate pairing, connect/disconnect the paired phone, and make/receive calls S[...]

4 Setting Up ezSpeak Before using ezSpeak, you must: • Charge ezSpeak • Pair ezSpeak to your mobile phone • Mount ezSpeak to your visor (for in car use) Directions for each of these activities are provided in the following three sections. Once these steps are completed, you will be ready to use ezSpeak! Charging ezSpeak Before using ezSpeak, [...]

5 USER GUIDE Pairing ezSpeak to Y our Mobile Phone Pairing is the process of linking ezSpeak with your Bluetooth mobile phone or other Bluetooth device that supports a headset and/or handsfree profile. Before using ezSpeak with your mobile phone you must pair the devices . After this process is complete, you can use ezSpeak with your paired mobile [...]

6 Mounting ezSpeak When used in a car , ezSpeak is designed to be mounted to your car visor . Y ou can use the visor clip with or without the optional swivel clip. T o Mount ezSpeak with the Visor Clip 1. Attach the visor clip to ezSpeak by sliding the clip into the bracket on the rear of ezSpeak as shown. 2. Slide the clip onto your car visor . T [...]

7 USER GUIDE Using ezSpeak Powering ezSpeak T o T urn On ezSpeak 1. Press and hold approximately two seconds until the display lights up and “ET6000” appears on the display . NOTE: T o conserve power , the display will turn off after being idle for approximately eight seconds. T o view the display , simply press . T o T urn Off ezSpeak 1. Press[...]

8 T o Make Calls Using Voice Dialing (if supported by your mobile phone) 1. Press . “Voice Dial” appears on the display and your phone is put into voice dialing mode. 2. After you hear a beep (usually between one to four seconds), speak the name of the person you wish to call. Y ou will hear the spoken name (if provided by your phone) and the c[...]

9 USER GUIDE T o Receive a Call 1. When you hear ring tone or see “Ringing” and the calling number (if provided) on the display , press . The call is automatically connected to ezSpeak and “Call Active” appears in the display . T o Reject an Incoming Call (if supported by your mobile phone) 1. When you hear ring tone or see “Ringing” an[...]

10 T ransferring Calls Y ou can transfer calls between your mobile phone and ezSpeak. T o T ransfer Calls from Y our Mobile Phone to ezSpeak 1. With the call connected to your mobile phone, press . “T ransferring” and the connected number appear on the display and the call is transferred to ezSpeak. T o T ransfer Calls from ezSpeak to Y our Mob[...]

Muting ezSpeak Y ou can mute and un-mute the microphone temporarily so that you cannot be heard by the connected party . T o Mute ezSpeak 1. While in talk mode, press and hold approximately two seconds. “Mute” appears on the display and the microphone is muted. T o Un-Mute ezSpeak 1. When the microphone is muted, press and hold . “Un-mute” [...]

12 T roubleshooting Issue When you initiate the Bluetooth device pairing feature on your mobile phone, your phone cannot find ezSpeak. ezSpeak is not communicating with your mobile phone. When you receive a call on your mobile phone, the call is not automatically connected to ezSpeak after you press . Even though ezSpeak is turned on, the call is n[...]

13 USER GUIDE Y our mobile phone does not accept voice commands when you are using ezSpeak. Y ou are encountering poor reception via ezSpeak. Y ou hear a crackling noise when connected on a call through ezSpeak. Y ou hear a clicking noise when connected on a call through ezSpeak. Solution Ensure that your mobile phone supports this feature and is s[...]

14 Limited W arranty The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase. In the event of a defect in operation during the warranty period T ekkeon, Inc. will replace the defective product when the owner returns all product contents. The limited warranty will be considered vo[...]

15 USER GUIDE FCC Statement for Class B Digital Devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can [...]

16 Customer Support If you product is in need of repair or replacement, please contact the T ekkeon Customer Support Center at: T ekkeon, Inc. c/o ezSpeak 3002 Dow Avenue, #134 T ustin, CA 92780 888-787-5888 / 714-832-1266 www .tekkeon.com T ekkeon, Inc. will issue a Return Merchandise Authorization (RMA) number for all repairs or exchanges. et6000[...]

et6000_ug_fnl 10/26/06 4:17 PM Page 17[...]

www .tekkeon.com © 2006 T ekkeon, Inc. Rev A All Rights Reserved ezSpeak™ is a trademark of T ekkeon, Inc. Cut loose. Stay loose. et6000_ug_fnl 10/26/06 4:17 PM Page 18[...]