Toshiba 7FM03281000 manuale d’uso

TOSHIBA Portable Printer B-EP2DL/EP4DL SERIES Owner's Manual [B-EP2DL] [B-EP4DL][...]

1 N258 CE Compliance (for EU only) This product complies with the requirements of EMC and R&TTE Directives including their amendments. FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable prote ction again[...]

2 <English> <Franaçis> <Deutsch> <Español> <Nederlands> CAUTION! 1. Onl y use TOSHIBA TEC battery packs designed and manufactured for use with the specific printer model. There is a risk of explosion if the battery is replaced by an incorrect ty pe. Dispose of used batteries according to the instructions. B-EP2DL-GH2[...]

3 <Italiano> < Português > <Polski> c䞲ῃ㠊e ਛᢥ㧔❥㜚ሼ㧕 A TTENZIONE! 1. Utilizzare il pacco batterie corretto per ogni modello di stampante. Esiste il rischio di esplosine se utilizzate le batte rie sbagliate. Smaltite le batterie secondo le istruzioni. B-EP2DL-GH20-QM-R B-EP4DL-GH20-QM-R B-EP2DL-GH30-QM-R B-EP80[...]

4 English Franaçis Deutsch Español The following information is for EU-member states only: Disposal of products (based on EU-Directive 2002/96/EC, Directive on Waste electrical and electronic e q ui p ment – WEEE ) The use of the symbol indicates that this product ma y not be disposed as unsorted municipal waste and has to be collected separate[...]

5 Nederlands Italiano Português Polski Le seguenti informazioni sono solo gli stati membri della UE: Smaltimento del prodotto (basato sulla direttiva EU-Directiv e 2002/96/EC, Direttiva sullo smaltimento per il Riciclaggio delle A pparecchiature Elettriche od Elettroniche – RAEE – WEEE) Questo simbolo indica che i prodotti non po ssono essere [...]

6 Precautions for Handling of Wireless Communication Devices Bluetooth® Module: TEC-BTM-R (GH30 model) Wireless LAN Module: SD-Link 11g (GH40 model) Trade Mark Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and used byTOSHIBA TEC CORPORATION under license. Cautions General For all countries and areas This product is a wireless co[...]

7 CAUTION! 1.To avoid injury, be careful not to catch or jam your fingers while opening or closing the cover. 2.Do not touch moving parts. To reduce the risk that fingers, jewellery, clothing, etc., be drawn into the moving parts, turn off the power switch to stop movement. Safety Summar y Personal safety in handling or mai ntaining the equipment i[...]

8 • If water or any other liquid enters the machine, turn off the power. Continuous use of the machine under such conditions may cause fire or electric shock. • If the enclosure is damaged when dropped or subject to shock, turn off the power. Continuous use of the machine under such conditions may cause fire or electric shock. • Avoid continu[...]

9 Media Specification 㩷  Label 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷  Tag/Receipt 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 Black Mark Feed direction (I) (H) (G) (D) (C) (F) (B) (A) (E) (H) (G) (D) (B) (A) (E)[...]

10 B-EP2DL Series (Unit: mm) Label Tag/Receipt Receipt Item Media Batch mode Strip mode With black mark No black mark (A) Label/Receipt pitch 10.0 - 999.9 13.0 - 67.0 10.0 – 999.9 --- (B) Label/Receipt length 7.0 - 997.0 10.0 - 60.0 7.0 - 997.0 --- (C) Backing paper width 26.0 – 58.0 --- (D) Media width 24.0 – 56.0 24.0 – 58.0 (E) Gap/black[...]

11 CARE/HANDLING OF THE MEDIA • Do not store the media for longer than the manufactures recommended shelf life. • Store media rolls on the flat end, do not store them on the curved sidesas this might flatten that side causing erratic media advance and poorprint quality. • Store the media in plastic bags and always reseal after opening. Unprot[...]

12 Printer Specification 㩷 B-EP2DL Series 㩷 Model B-EP2DL-GH20-QM-R B-EP2DL-GH30-QM-R B-EP2DL-GH40-QM-R Driving power source Lithium ion battery 7.4 䌖 2600mAh 䋨 Nominal value 䋩 䋨 Battery pack model name: B-EP802-BT-QM-R 䋩 Printable count Approx.100m/Full charge 䋨 It depends on the operating environment, print conditions, battery con[...]

13 B-EP4DL Series 㩷 Model B-EP4DL-GH20-QM-R B-EP4DL-GH30-QM-R B-EP4DL-GH40-QM-R Driving power source Lithium ion battery 14.8V, 2600mAh 䋨 Nominal value 䋩 䋨 Batter pack model name: B-EP804-BT-QM-R 䋩 Printable count Approx.100m/Full charge (It depends on the operating environment, print conditions, battery condition, etc.) Life cycle 300 cy[...]

14 Daily maintenance 㩷 To help retain the high quality and performance of your printer, it should be cleaned regularly cleaned. 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷  Print head Wipe the print head element with a supplied print head cleaner pen.  Peel-off Roller Wipe clean the Peel-off Roller with a soft cloth slightly moistened with absolute[...]

15  Media Guide Roller and Strip Shaft Wipe clean the Media Guide Rollers with a soft cloth moistened with absolute ethyl alcohol while rotating the rollers. Wipe clean the strip shaft with a soft cloth slightly moistened with absolute ethyl alcohol. Clean the strip shaft of the linerless label kit in the same way. Cleaning should be performed e[...]

16 Part Names 㩷 B-EP2DL Series 㩷 㩷㩷 㩷㩷 㩷 㩷 㩷 㩷 Top Cover RS-232C Port (GH20 only) Peel-off Roller Platen IrDA Window Top Cover Open Button Operation Panel Strap Slot USB Port Peel-off Roller Cover DCIN Connector Battery Lever Battery Pack Print Head Belt Clip M-3x8 Screws Print Head Cleaner Media Guide Roller Media Sensor Ferrit[...]

17 B-EP4DL Series 㩷 㩷㩷 㩷 IrDA Window Top Cover Open Button Operation Panel Strap Slot Battery Lever Battery Pack Top Cover Peel-off Roller Platen Print Head Peel-off Roller Cover DCIN Connector USB Port Media Guide Roller Media Sensor RS-232C Port (GH20 only) Belt Clip M-3x8 Screws Print Head Cleaner BD Address Label (2 pcs.) (GH30 model on[...]

18 Operation Panel Functions 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 No. Name/Icon Function/Usage Liquid Crystal Display (16 lines x 2 lines) Upper line: Icons indicating the printer statuses, such as the radio intensity, battery level, etc. are displayed. Lower line: Printer status is ind[...]

19 No. Name/Icon Function/Usage (10) CHARGE lamp Lights up in orange while the battery pack is charged and goes out when the battery charge is completed. (11) 䌛 POWER 䌝 button Turns on or off the printer. How to turn on the printer While the printer is off, hold down the POWER button for a few seconds. When “ONLINE” is displayed on the LCD,[...]

20 Loading a battery pack 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 Pushing aside the Battery Lever with the Battery Pack, insert the Battery Pack into the printer to the bottom. The Battery Pack is locked by the Battery Lever. Be careful of the orientation of the Battery Pack. NOTE: x Be sure to use a battery pack designed and manufactured f[...]

21 Removing a battery pack 㩷 Slide the Battery Lever in the direction of the arrow, and remove the Battery Pack from the printer. 㩷 [B-EP2DL Series] [B-EP4DL Series] 㩷 㩷 Charging the Battery Pack with an Optional Adapter 㩷 When charging the battery pack in the printer using an optional AC Adapter, cigarette lighter adapter, or DC adapter,[...]

22 Loading the Media 㩷 1. 㩷 Press the Top Cover Open Button to open the Top Cover. [B-EP2DL Series] [B-EP4DL Series] 2. 㩷 Move the Paper Guide Lever toward the Operation Panel and the Paper Guides outward. NOTE: Do not move the Paper Guides without unlocking the Paper Guide Lever. Doing this may break the Paper Guide. 3. 㩷 Place a media rol[...]

23 Before using a peel-off unit 㩷 When issuing labels in the peel-off mode, pull out the peel-off roller before loading a label roll. 1. Open the Top cover, and push the Peel-off Cover by the Ÿ marks with your thumbs in the direction of the arrow. 2. Pull out the Peel-off Roller until the both edges completely come out with a click Refer to “L[...]

24 How to attach the accessories 㩷 㩷 㩷 㩷 㩷 㩷  Belt Clip When you use the printer fixing to your belt, secure the supplied Belt Clip to the printer back. 1. Secure the Belt Clip to the printer back with the two screws. NOTE: Only use the supplied screw to secure the Belt Clip. Use of other screw may damage the printer inside. 2. Faste[...]

25 㩷  Carry case (Option) A carry case exclusively for the printer is available as an option. B-EP2DL Series: B-EP902-CC-QM-R B-EP4DL Series: B-EP904-CC-QM-R Put the printer into the Carry Case using the following procedure. 1. Turn off the printer. 2. Put the printer into the Carry Case in the orientation indicated by the illustration on the [...]

26 Data Transmission  IrDA 1. 㩷 Place the printer close to the host so that their IrDA windows face each other within 20 cm distance. 2. 㩷 Turn on the printer and the host, and send data from the host to the printer. NOTE: While communicating, avoid location where the IrDA window is subjected to direct sunlight. A communication failure m ay [...]

27 㩷  Serial (RS-232C) (GH20 model only) 1. 㩷 Connect the serial interface cable to the RS-232C port on the printer. 2. 㩷 Connect the other end of the serial interface cable to the host. 3. 㩷 Turn on the printer and the host, and send data from the host to the printer. NOTE: For details of the interface cable, please consult the nearest [...]

28 Troubleshooting When a problem occurs during operation, please check the following troubleshooting guide and take corrective action. If you cannot solve a problem with the following solutions, do not attempt to repair it by yourself. Turn off the printer, remove the battery pack, then contact a TOSHIBA TEC service representative for assistance. [...]

29 Error Message Cause Solution FLASH MEM FULL The flash memory has insufficient area for storing data. Turn off the [POWER] button, then back to on. Send data from the host to the printer again. If the problem recurs, please turn off the power and contact TOSHIBA TEC service representative. LOW BATTERY Remaining battery capacity is low. Turn off t[...]

30 Symptom Point to check (Cause) Solution The printer is communicating via wireless communication. (GH30/GH40 only) Terminate the wireless communication. Communication conditions are incorrect. Set the communication conditions correctly Issue mode is incorrect. Select a correct issue mode. The printer cannot communicate via IrDA. Transmission spee[...]

[...]

[...]

E PRINTED IN INDONESIA EO1-33079 7FM03281000[...]