Toshiba CS3910BH manuale d’uso

D4134051A High-Resolution CCD Camer a Model CS3910BH Specifications Contents 1.PRODUCT DESCRIPTI ON 6 2.FEATURES 6 3.COMPON ENTS 6 4.FUNCTI ON 7 5.SPECIFI CATIONS 12 6.TIMI NG CHART 15 7.EXTERNAL- VIEW DRA WINGS 18[...]

1 D4134051A BEFORE USE - GEN ERAL SAFETY INSTRUCTIONS This specifications contains important information for the operator (user) a nd/or people in the vicinity to avoid personal injury, or property damage. • Prior to use, read this specifications carefull y to f ull y under stand its instruct ions for correct use. • After reading, keep operatio[...]

2 D4134051A Do not repair, disassemble and /or modify by yourself. This may cause fire and/or electric shock. Be always sure to contact your dealer for internal repair, check and cleaning of the product. Don’t place things or materials on the unit. Ingress of foreign materials such as metallic things and liquid i nto the unit may cause a fire or [...]

3 D4134051A Avoid short-circuiting signal output. Otherwise, a malfunction may occur. Avoid giving a strong shock against the camera bod y. It might cause a breakdown or damage. If your camera is used in a system where its camera connector is subjected to strong repetitive shocks, its camera connector is possible to break down. If you intend to use[...]

4 D4134051A RESTRICTION FOR USE  Should the equipment be used in the following conditions or environments, give consideration to safelty measures and inform us of such usage: 1. Use of the equipment in the conditions or environment contrar y to those specified, or use outdoors. 2. Use of the equipment in applications sxpected to cause potential [...]

5 D4134051A CAUTIONS ON USE  Carefully handle the units. Do not drop, or give a str ong shock or vibration to the camera. This m ay cause problems. Treat the camera cables careful ly to prevent cable problems, such as cable breakdown and loosened connections.  Operating ambient temperature and humidit y. Do not use the camera in places where [...]

6 D4134051A 1. PRODUCT DESCRIPTIO N Model CS3910BH is an integrated-(one-body)-t ype monochrome CCD camera with a 2/3-type all-pixel-data-read-out CCD featuring high resolution. 2. FEATURES (1) High resolution CS3910BH features an high picture resolution thr ough the adoption of a MEGA-pixel CCD (Total pixel number: 1,500,000 Active pixel number: 1[...]

7 D4134051A 4. FUNCTION The settings of each mode can set with rear-panel and inner DIP-switches. *1: The shutter-speed selectable with inner DIP s witches 2 through 4. *2: ON / OFF selectable with inner DIP SW 1. (1) Read out mode setting Change internal Dip SW1(Factor y setting: OFF) OFF: 15Hz All Pix el Data Readout Mode (Normal mode) ON: 60Hz H[...]

8 D4134051A (2) Shutter Speed setting Internal DIP switch from 2 to 4) Shutter speed is 1/15s fixed when Shutter mode is normal shutter. SW2-2 SW2-3 SW2-4 Shutter speed OFF OFF OFF 1/30 ON OFF OFF 1/60 OFF ON OFF 1/125 ON ON OFF 1/250 OFF OFF ON 1/1000 ON OFF ON 1/2000 OFF ON ON 1/4000 ON ON ON 1/10000 （ 3 ） External sync setting(HD/VD ） (a)S[...]

9 D4134051A (4) RTS (Random Trigger Shutter) Pulse Control The camera goes into RTS (Random Trigger Shutter) mode when TRIG te rminal vol tage is in HIGH (More than 1V), and starts light-exposure at the falling edge timin g. Under FIX mode, the exposure-time is controll ed with inner D IP switch settings. Under PU LSE mode, the exposure-time is det[...]

10 D4134051A (5) Multiple-shutter Mode Setting Exposure is done during the one frame period which comes immediatel y after TRIG IN. Images are output at the readout signal (E.VD) timin g. If the exposure is made more than one time before the readout signal input, superposed images are output. After video-output, it goes back into the normal operati[...]

11 D4134051A (6) Partial-scan Mode Setting The partial-scan ON/OFF selection is made via the rear SW1 D I P5 ( Initial factory setting: OFF) OFF: Normal mode ON: 1/2 --- Screen-center 1/2 readout ◎ Total line １０４６ line Screen half-center read ou t Opening pixel ２７１line Opening pixel ４８７line Opening pixel ２８０line Normal-s[...]

12 D4134051A 5. SPECIFICAT IONS Model CS3910BH [Electric specification] Image sensor Interline CCD Total pixel 1434(H) x 1050(V) Active pixel 1392(H) x 1040(V) Unit cell size 6.45(H ) x 6.45(V) micrometer m Optical size Equivalent to 2/ 3 inch image pickup tube Scanning system Non-interlace Aspect ratio 4:3 Sync system Internal / External automatic[...]

13 D4134051A Trigger signal TTL level, Negative Input impedance: 10k-ohm Pulse width: Over 1H(62.5 micro s) Multiple-shutter readout signal TTL level, Negative Input impedance: 10k-ohm Pulse width: From 62.5 micro s through 10ms [S y nc output signal specification] Output signal WEN 4V(p-p), Positive, Pulse width: 1H (62.5 micro s) HD [Output from [...]

14 D4134051A [Spectrum response characteristics (T yp ical)] Refer to table SRC below. Graph reflects lens ch aracteristics, but do not reflect that of light-source. Table: Typical SRC X-axis: Wave-length Y-axis: Relative response [Connector pin arrangement] DC IN/SYNC Connector (Camera side): HR10A-10R-12PB (Manufactured b y HI ROSE DENK I) Plug ([...]

15 D4134051A 6. TIMING C HART 6-1. Digital output EIA RS644 standard (LVDS) Driver output voltage Plus/mi nus 350mV (Differential output) / 100-ohm H Rate Total clock counts: 1790C LK / 1H DATA counts: 1392C L K / 1H CLK 34.92ns V rate phase: Same as one in analog timing-chart V Rate A=3H B=3H C=6H D=1040H E=1046H CLK DA TA HD 276CLK 1 3 9 2 C L K [...]

16 D4134051A 6-2. External sync. 6-3.Read out mode *15Hz All pixels read out HD VD WEN SG VD: 1/15Hz≒65.4ms (1046H) P ulse width:Longer than 1H E.VD Phase lag 200ns or less against HD E.HD HD VD DATA WEN CCD (Exposure) 1046H (15.29Hz) Exposure-time (setting with inner DIP SW) 1 2 3 4 5 6 1038 1039 1040 7 DATA VD HD WEN 8[...]

17 D4134051A *60Hz High-speed draft read out 1 4 9 12 17 2 0 1028 1033 1036 25 DATA VD HD WEN 28 33 HD VD DATA WEN CCD (Exposure) 262H (60.37Hz) Exposure-time (setting with inner DIP SW)[...]

18 D4134051A 7. EXTERNAL- VIEW DRAWIN G[...]