Toshiba IK-WD14A manuale d’uso

NETWORK CAMERA Model: IK-WD14A Quick Start Guide and Important Safeguards This guide describes the hardware installation. Refer to the user's manual (PDF le) contained in the CD-ROM for settings, operations and other information. The application Adobe Reader is needed to view PDF les. If you do not have this application, download it from[...]

2 2 Introduction FCC (USA)-INFORMA TION NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate rad[...]

3 Thank you for purchasing the IK-WD14A Network Camera. Before using the camera, read this quick start guide carefully to ensure correct usage. After reading this quick start guide, save it for future reference. The design, specications, software, and quick start guide contents are subject to change without prior notice. T erms and T rademarks l[...]

4 4 T able of Contents Introduction 2 FCC (USA)-INFORMA TION ....................................................................................... 2 T erms and T rademarks .............................................................................................. 3 T able of Contents.............................................................[...]

5 Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. W arnings Comply with all warnings on the product and in the user's manual. 4. Follow Instructions Follow all operating an[...]

6 6 13. Lightning For additional protection on this camera during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the camera due to lightning and power-line surges. If lightning occurs, do not touch the [...]

7 Important Safeguards (Cont.) CAUTION T O REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SER VICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" [...]

8 8 Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear . A vertical stripe may appear on the screen. However , this is not a malfunction. l T reat the camera with care Dropping or su[...]

9 9 Setting the Network Camera Environment Items needed for network camera monitoring l Administrator's personal computer The personal computer that allows setting, operating, monitoring and other functions with the network camera is called the "administrator's personal computer" in this guide. * The personal computer for viewin[...]

10 10 IK-WD14A Ver . WD14-01 l IK-WD14A l T orx driver l A V Out cable l W arranty Card l Quick Start Guide and Important Safeguards l Screws and Anchors Contents l CD-ROM l Alignment Sticker P/N : 62XXXXXXXG[...]

1 1 1 1 Physical Description Cover screws Knock out Internal microphone Dome Cover Lens cover T ilt adjustment screws Mounting holes[...]

12 l Front View CAMERA MAIN UNIT l Rear View IR LEDs (SR-LED) Focus Button Light Sensor Lens Built-in Microphone Status LED Micro SD/ SDHC Card Slot Recessed Reset Button DIP switch Audio/Video Out (Printed "A V Out") 10/100BaseT Ethernet Socket MIC In (Printed "Audio In") Microphone Video Output internal external NTSC 60Hz P AL[...]

13 Hardware Installation Bottom of the Camera Dome Cover First, use the supplied driver to detach the dome cover from the camera base. Then, follow the steps below to install the camera; either to a ceiling or to a wall.[...]

14 14 14 Notes: l The included screws and anchors are used to install the camera to a solid surface. (e.g. concrete) If installing on loose or thin material surfaces , use the appropriate anchors (not included) with the screws. l Generally the camera turns a built-in microphone in the direction of object. l Install the camera securely . Mounting th[...]

15 15 Network Deployment l When using a PoE-enabled switch The camera is PoE-compliant, allowing transmission of power and data via single LAN cab le. S ee th e fol lowi ng il lust rat io n t o con ne ct th e c am er a t o a Po E swi tc h v ia LA N cable. POW ER COL L ISION LIN K RE CEIV E PAR TITIO N 1 2 3 4 5 POW ER COL L ISION LIN K RE CEIV E PA[...]

16 AC 120V AC24V or DC12V adapter UL Listed Class 2 power supply (not supplied) 16 16 POW ER COL LIS ION LINK RE CEIV E PAR TITION 1 2 3 4 5 1 2 Ethernet switch (not supplied) General Connection (without PoE) 1. Connect the camera to an Ethernet switch via LAN cable. 2. Connect the power cable from a power unit (not supplied) to the appropriate por[...]

17 17 17 0002D1714270 00-02-D1-71-42-70 169.254.0.99 IK-WR12A Installation Wizard 1. Install the "Installation Wizard" under the Software Utility directory from the CD- ROM. 2. The program will analyze your network environment. After your network is analyzed, please click on the "Next" button to continue the program. 3. The prog[...]

18 18 For more information on camera conguration, please refer to use r's manual on the CD-ROM. 1. Access the Network Camera from the network. 2. Retrieve live video through Internet Explorer ® . Retrieving Images[...]

19 19 Adjusting the Lens Based on the live image retrieved from the camera, adjust the camera lens by performing the following: T o adjust the viewing angle 1. T urn the lens module left and right. 2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens module up and down. Upon completion, tighten the screws. 3. T urn[...]

20 20 2 1 The supplied screwdriver is exclusively designed to match the dome screws. Do not discard the screwdriver . Dome cover 1. Attach the dome cover to camera. 2. Secure the two dome screws with a screwdriver . Make sure all parts of the camera are securely installed.[...]

21 21 Access to the Network Camera from the network, and click the conguration button on the main page. Then click the following: Audio and Video Image Zoom and Focus T o adjust the z oom factor and focus range 1. Use the Zoom slide bar to nd an optimal view of the area of interest where you want to adjust its focus. Click and drag the double[...]

TOSHIBA AMERICA INFORMA TION SYSTEMS, INC. Surveillance & IP V ideo Products 9740 Irvine Boulevard, Irvine, CA 92618-1697 Phone Number: (877) 855-1349 625015900G[...]