Toshiba M7 manuale d’uso

PMAD00077011 05/06 T ecra ® M7 Series Use r ’ s Guide If you need assistance: ❖ T oshiba’ s Support W eb site pcsupport.toshiba.com ❖ T oshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the Unite d States (949) 859-4273 For more information, see “If Something Goes Wrong” on page 212 in th[...]

2 5.375 x 8.375 ver 2.3 Handling the cord on this product will expose you to lead, a chemical kno wn to the State o f California to ca use birth defe cts or other reproductive harm. Wash h ands after handling . Model: T ecra ® M7 S eries Recordable and/or ReWritable Drive(s) and Associated Software W arranty The computer system you purchased may i[...]

3 5.375 x 8.375 ver 2.3 Critical Applications The computer you have purchased is not designed for any “critical applications. ” “Critical applications” means life s upport sy stems, medical applications, connections to implanted medi cal de v i ces, commercial transportation, nuclear facilities or systems or an y other applicatio ns where p[...]

4 5.375 x 8.375 ver 2.3 This device complies with P art 15 of the FCC Rules. Operation is subject to the following tw o conditions: ❖ This device may not cause harmful interference. ❖ This device must accept an y interferen ce receiv ed, including interference that may cause undesired operatio n. Contact either: ❖ T oshiba’ s Support W eb s[...]

5 5.375 x 8.375 ver 2.3 decimal point (e.g., 03 is a REN of 0. 3). For earlier products, the REN is separately shown on the label. Connection to party line service is subject to state tarif fs. Contact the state public utility commission, public se rvice co mmission or corpor ation commission for information. T elephone Company Procedures The goal [...]

6 5.375 x 8.375 ver 2.3 provided may not be a 900 number or any other number for which charges exceed local or long-distan ce transmission char ges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer . Alarm Equipment If your home has specially wired alarm equipment co[...]

7 5.375 x 8.375 ver 2.3 NO TICE: The Ringer Equi v alence Number (REN) assigned to each terminal device pro vides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any comb ination of de vices subject only to the requirement that the sum of the Ringer Eq[...]

8 5.375 x 8.375 ver 2.3 Wireless LAN and Y our Health W ireless LAN products, like other radio de vices, emit radio frequency electromagnetic energy . The level of ener gy emitted by W ireless LAN devices howe ver is far much less than the elect romagnetic energy emitted by wireless devices lik e for example mobile phones. Because W ireless LAN pro[...]

9 5.375 x 8.375 ver 2.3 documentation that comes with the pr oduct. This de vice complies with the following radio frequency and safety standards. Canada – Indust ry Canada (IC) This device complies with RS S 210 of Ind ustry Canada. The installer of this radio equipment mu st ensure that the antenna is located or pointed such that it does not em[...]

10 5.375 x 8.375 ver 2.3 EU Declaration of Conformity T oshiba declares, that this product confor ms to the following Standards: This product is carrying the CE-Mark in accordance w ith the related European Directiv es. Responsible for CE-Marking is T o shiba Europe, Hammfelddamm 8, 41460 Neuss, Germany . VCCI Class B Information Modem W arning Not[...]

11 5.375 x 8.375 ver 2.3 Ta i w a n The legal communications mentioned in the abov e item refer to radio communications operated in accordan ce with telecommunication laws and regulations. Lo w power radio frequenc y electric machin ery shall resist against interference from legal communications or from industrial, scientific and medical radio emis[...]

12 5.375 x 8.375 ver 2.3 2. Indication The indication shown belo w appears on this equipment. 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation. O F : This equipment uses OFDM modulation. 3 The interference range of this equipment is less than 40m. 4 This equipment uses a frequenc y bandwidth from 2,400 M[...]

13 5.375 x 8.375 ver 2.3 The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wire less module into other device. ❖ 5.17 GHz to 5.23 GHz for indoo r use only . Radio Approvals for Wireless Devices The following information is de pendent on what ty pe of wireless device is in your computer [...]

14 5.375 x 8.375 ver 2.3 Europe - Restrictions for us e of 2.4 GHz Frequencies in European Community Countries België/ Belgique: For pri v ate usage outside buildings acr oss public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for priv ate us age outside buildings across publ[...]

15 5.375 x 8.375 ver 2.3 802.11a (5 GHz) Tu r b o M o d e ( 5 G H z ) Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries O: allowed ×: forbidden ❖ T o remain in conformance with E uro pean spectrum usage laws for W ireless LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply . The user should use t[...]

16 5.375 x 8.375 ver 2.3 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands i n the European Community . Ad-hoc mode provides a direct communication between two client devi ces without a W ireless LAN Access Point. ❖ This device must be used with Acce ss Points that hav e employed and activ ated a radar detectio[...]

17 5.375 x 8.375 ver 2.3 802.11a (5 GHz) Tu r b o M o d e ( 5 G H z ) Approved Countries/Regions for use for the Intel ® PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approv ed to the radio standard by the countries/re gions in the following table. Do not use this equipment except in the countries/regions in the following table. Aus[...]

18 5.375 x 8.375 ver 2.3 Approved Countries/Regions for use for the T oshiba Mini PCI Wireless LAN Card This equipment is approv ed to the radio standard by the countries/re gions in the following table. Do not use this equipment except in the countries/regions in the following table. Approved Countries/Regions for use for the INPROCOMM IPN2220 Wir[...]

19 5.375 x 8.375 ver 2.3 Bluetooth wire less technology is a new innovative te chnology , a nd T oshiba has not confirmed compatibility of its Bluetooth products with all PCs and/or equipment using Bluetooth wireless technology othe r than T o shiba portable computers. Always use Bluetooth cards from T oshiba in order to ena ble wireless networks o[...]

20 5.375 x 8.375 ver 2.3 In some situatio ns or en vironments, the use of Bluetooth wireless techno logy may be restricted by the proprietor of th e building or responsible representati ves of the organization. These situations may for example include: ❖ Using the equipment with Bluetooth wireless technolog y on board airplanes, or ❖ In any oth[...]

21 5.375 x 8.375 ver 2.3 Ta i w a n The legal communications mentioned in the abov e item refer to radio communications operated in accordan ce with telecommunication laws and regulations. Lo w power radio frequenc y electric machin ery shall resist against interference from legal communications or from industrial, scientific and medical radio emis[...]

22 5.375 x 8.375 ver 2.3 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 FH: This equipment uses FH-SS modulation. 3 The interference range of this equipment is less than 10m. 4 This equipment uses a frequenc y bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to av oid the band of mob ile object identification systems. 3. T oshiba Dir[...]

23 5.375 x 8.375 ver 2.3 Optical Drive Safety Instructions The HD DVD-ROM and mult i-function drives employ a la ser system. T o ensure proper use of th is product, please read th is instruction manual carefully and retain for future reference. Never attempt to disassemble, adjust or repair a HD DVD, CD/DVD drive, CD-RW drive, Multi-drive or any ot[...]

24 5.375 x 8.375 ver 2.3 Copyright This guide is copyrighted by T oshiba Amer ica Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide canno t be reproduced in any form without the prior written permission of T oshiba. No patent liability is assumed, howe ver , with respect to the use of the information contained[...]

25 5.375 x 8.375 ver 2.3 T rademarks T ecra is a registered trademark of T osh iba America Informa tion Systems, Inc. and/or T oshiba Corporation. Microsoft and W indo ws are registered tr ademarks of Microsoft Corpo ration in the United States and/or other countries. DirectX, Active Desktop, DirectShow , and W indows Media are registered trademark[...]

26 5.375 x 8.375 v er 2.3 Contents Introduction ................ ................................................................ 35 This guide ...............................................................36 Safety icons ............................................................37 Other icons used ...............................................[...]

27 Contents 5.375 x 8.375 v er 2.3 Using the computer for the first time ......................51 Opening the display panel .................................52 Your computer’s features and specifications ....53 Turning on the power .......................................53 Adding memory (optional) ......................................54 Installi[...]

28 Contents 5.375 x 8.375 v er 2.3 Customizing your computer’s settings ..............86 Caring for your computer ........................................87 Cleaning the computer ......................................87 Moving the computer ........................................ 87 Using a computer lock ......................................88 C[...]

29 Contents 5.375 x 8.375 v er 2.3 Toshiba’s online resources ...................................109 Chapter 3: Mobile Computin g ........................... ...................... 110 Toshiba’s energy-saver design..............................110 Running the computer on battery power ..............110 Battery Notice ...........................[...]

30 Contents 5.375 x 8.375 v er 2.3 The Internet ....................................................139 The World Wide Web .....................................139 Internet Service Providers ...............................139 Connecting to the Internet .............................140 Surfing the Internet .........................................14[...]

31 Contents 5.375 x 8.375 v er 2.3 Setting passwords ................................................ 164 Using an instant password ..............................164 Setting a user password .................................165 Disabling a user password .............................. 165 Using a supervisor or user password ................... 166 Se[...]

32 Contents 5.375 x 8.375 v er 2.3 CD/DVD Drive Acoustic Silencer ...........................194 Toshiba Accessibility ............................................195 Toshiba Mobile Extension .....................................196 Trusted Platform Module (TPM) ...........................197 Fingerprint Authentication Utility .....................[...]

33 Contents 5.375 x 8.375 v er 2.3 PC Card problems ...........................................233 Printer problems .............................................237 Modem problems ............................................238 Wireless networking problems .......................239 DVD operating problems .......................................242 [...]

34 Contents 5.375 x 8.375 v er 2.3 Appendix B: Power Cord/Cable Connectors.......................... 265 USA and Canada ............................................. 265 United Kingdom ..............................................265 Australia ..........................................................265 Europe ....................................[...]

35 5.375 x 8.375 ver 2.3 I n t roduct ion W elcome to the world of po werful, portable, multimedia computing. W ith your T oshiba notebook computer , your work and entertainment can accompany you where ver you go. Certain Micros oft ® software product(s) included wi th this computer may use technological measures for copy protection. IN SUCH EVENT[...]

36 Introduction This guide 5.375 x 8.375 ver 2.3 The product specifications and configura tion information are designed for a product Series. Y our particular model may no t have all the features an d specifi cations listed or illustrated. For more detailed information about the features and specifications on your particular model, please visit T o[...]

37 Introductio n Safety icons 5.375 x 8.375 ver 2.3 Safety icons This manual contains safety in structions that must be observed to a v oid potential h azards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions hav e been classified according to the seriousness of the risk, and icon s highlight t[...]

38 Introduction Other documentation 5.375 x 8.375 ver 2.3 Other icons used Additional icons highlight ot her helpful or educational information: TECHNICAL NOTE: This icon in dicates technica l information about the computer . HINT : This icon indicates helpful hints and tips. DEFINITION: Th is icon indi cates the de finition of a te rm used in the [...]

39 Introductio n Service options 5.375 x 8.375 ver 2.3 Ser vice options T oshiba offers a full line of optional service programs to complement its limited warranty . T oshiba’ s standard limited warranty , extended warranty , and service upgrade terms and conditions are av ailable at warranty .toshiba.com . T o stay current on the most r ecent so[...]

40 5.375 x 8.375 ver 2.3 Chapter 1 Getting Started This chapter provides tips for w orking comfortably , summarizes ho w to connect components, and explains what to do the f irst time you use your notebook computer . Selecting a place to work Y our computer is portable and designed to be used in a v ariety of circumstances and locations. Creating a[...]

41 Getting Started Selecting a place to work 5.375 x 8.375 ver 2.3 ❖ Equipment that ge nerates a st rong electromagnetic f ield, such as stereo speakers (oth er than speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner v ents or heater[...]

42 Getting Started Selecting a place to work 5.375 x 8.375 ver 2.3 Never allow any liquids to spill into any part of your com puter , and never expose the computer to rain, wate r , seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury . If any of these eventualities should acci[...]

43 Getting Started Selecting a place to work 5.375 x 8.375 ver 2.3 ❖ K eep the computer and disk s a way from objects that generate strong magnetic fields, such as lar ge stereo speakers. Information on disks is stored magnetically . Placing a magnet too close to a disk can erase important files. Handle discs carefully . Avoid touching the surfac[...]

44 Getting Started Setting up your computer 5.375 x 8.375 ver 2.3 Always make sure your PC and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your PC is in St andby mode). In this condition, observe the following: ❖ Never cover your [...]

45 Getting Started Setting up your computer 5.375 x 8.375 ver 2.3 T o register your compu ter online or to sign up for an Internet account, you must either establish a Local Area Network (LAN) connection, or connect the b uilt-in modem to a telephone line (see “Connecting the mode m to a telephone line” on page 134 ). Setting up your software W[...]

46 Getting Started Re gistering your computer with T oshiba 5.375 x 8.375 ver 2.3 If an Internet connectio n could not be foun d, a windo w will display the message: “ An Internet connection could not be chosen. ” Click Next to continue. If you are conne cting your computer to a network, consu lt your system administrator before you choose your[...]

47 Getting Started Adding optional external de vices 5.375 x 8.375 ver 2.3 Adding optional external devices Before adding extern al devices or memory , T os hiba recommends setting up your software. See “Se tting up your software” on page 45 . After starting your computer fo r the first time yo u may want to: ❖ Add more memory (see “ Adding[...]

48 Getting Started Connecting to a power so ur ce 5.375 x 8.375 ver 2.3 Always confirm that the power plug (and extension cable plug if used) has been fully inserted into the socket to ensure a secure electrical connection. Failure to do so may result in a fire or electric shock, possibly resulting in serious injur y . Be careful if you use a multi[...]

49 Getting Started Connecting to a po wer sour ce 5.375 x 8.375 ver 2.3 T o connect A C po wer to the computer: 1 Connect the po wer cord/cab le to the A C adaptor . (Sample Illustr ation) Connecting the po wer cor d/cable to the A C adaptor Handling the cord on this product will expose you to lead, a chemical kno wn to the State o f California to [...]

50 Getting Started Connecting to a power so ur ce 5.375 x 8.375 ver 2.3 3 Connect the po wer cord/cable to a li ve electrical outlet. The A C power lig ht on the indicator panel glo ws green. Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly re sulting [...]

51 Getting Started Char ging the main battery 5.375 x 8.375 ver 2.3 Charging the main batter y Y our computer came with its batte ry already installed. Before using the battery to po wer the computer , you must charge the battery . T o char ge the battery , leav e the computer plugged into an A C po wer source for at least three hours with the comp[...]

52 Getting Started Using the computer for the fir st time 5.375 x 8.375 ver 2.3 Opening the display panel 1 Press the display latch b utton, and then lift the display panel. (Sample Illustration) Opening the display pa nel T o avoid damaging the display pa nel, do not force it beyond the point where it moves easily and nev er lift the computer by t[...]

53 Getting Started Using the computer for the f irst time 5.375 x 8.375 ver 2.3 Y our computer’ s features and specifications Certain notebook chassis are designed to accom modate all possible confi gurations for an entire prod uct Series. Y our select model may not hav e all the features and specifications corresponding to all of the ic ons or s[...]

54 Getting Started Adding memory (optional) 5.375 x 8.375 ver 2.3 (Sample Illustra tion) T urning on the power The preinstalled operating system will load automatically . When you turn on the computer for the first time, do not turn off the power again until the operating sy stem has loaded completely . Adding memor y (optional) HINT : T o purc has[...]

55 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 For more information on memory options, check the accessories information that ca me with your compute r , or visit accessories.toshiba.c om . Before adding extern al devices or memory , T oshiba recommends setting up your software. See “Setting up yo ur software” on page 4[...]

56 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 ❖ Recov er just your C: dri v e, lea ving any other partitions you may ha ve created intact, for e x ample, a D: dri ve. ❖ Recov er your hard disk drive to the factory-set default without the HDD Recov ery partition. ❖ Delete your hard disk dri v e recov ery partition wit[...]

57 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 2 Select CD or D VD (to create Recovery media on CDs or D VDs). (Sample Image) Reco very Disc Cr e ator scr een 3 Select the items you want to cop y by clicking the check box next to the item’ s N ame – recov ery f iles, applications (original b undled dri v ers and applica[...]

58 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 Hard Disk Drive Recovery using the recover y partition Y ou have the options of reco vering your system using the Hard Dri ve Reco v ery partition to the f actory-set default, or recov ering just your C: dri ve and leaving ot her partitions (for example, a D: dri ve) intact, or[...]

59 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 Recovering the original factor y image (recommended recover y method) Recovering a hard disk drive to its f actory default setting deletes all partitions on the hard disk drive and your information will be lost. Be sure to save your work to extern al media first. 1 On the T osh[...]

60 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 Erasing the hard disk The Recovery W izard allows yo u to delete all data and partitions from the hard dis k. T o delete the data and par titions from your hard disk: 1 On the T oshiba Recov ery W izard screen, select Erase the hard disk , then click Next . 2 The ne xt screen l[...]

61 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 4 Click Next to begin deleting the HDD. When the process is completed, a message disp lays informing you that the HDD has been deleted. 5 Press any k ey on the ke yboard to restart th e computer . Recovering the C: partit ion of the HDD without changing the current partition si[...]

62 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 Recovering the C: partition with a user specified size Resizing and recovering your C: drive to its f actory de fault setting reformats all partitions on the HDD (for example, if you created a D: drive, it will be deleted during the recovery process) and your information will b[...]

63 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 Hard Disk Drive Recovery using the Recover y media If you need to reco ver yo ur computer to its def ault f actory state, you can reb uild the system using your Hard Dri ve Recov ery Utilities. T o recov er your hard disk dri v e using the utilities b urned to CDs or D VDs (ref[...]

64 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 Recovering the original factor y image (recommended recover y method) Recovering a hard disk drive to its f actory default setting deletes all partitions on the hard disk drive and your information will be lost. Be sure to save your work to extern al media first. 1 Select “Re[...]

65 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 2 Select “Recov er without the ha rd dri v e partitions. ” Click Next . ❖ A confirmation message appears, reminding you that all information on the C: driv e will be lost during the recov ery process. Be sure you ha ve sa ved your work to external media before proceeding.[...]

66 Getting Started Har d Drive Recovery Utilities 5.375 x 8.375 ver 2.3 Checking the HDD operating status After restoring your hard disk dri ve, you can ch eck its status as follo ws: 1 Click Start , and then click Control Panel . 2 Double-click the Administrative T ools icon. 3 Double-click the Computer Management icon. 4 Click Disk Management . 5[...]

67 Getting Started Using the T ouchP ad™ 5.375 x 8.375 ver 2.3 Using the T ouchPad ™ The T ouchPad ™ , the small, smooth squa re cutout located in front of the keyboard, is sensiti ve to touch and enables you to mov e the cursor with the stro k e of a f inger . Simply mov e your finger on the T ouchPad in the direction you would like to mov e[...]

68 Getting Started Using the T ouchP ad™ 5.375 x 8.375 ver 2.3 Control buttons When a step instructs you to click or choose an item, mo ve the cursor to th e item, the n press and release the primary (left-hand) b utton. T o double-click, press the primary but ton twice in rapid succession. The primary button usually corresponds to the left mouse[...]

69 Getting Started Using the T ouchP ad™ 5.375 x 8.375 ver 2.3 4 Click the T ouchP AD ON/OFF tab . The T ouchP AD ON/OFF tab vie w windo w appears. (Sample Imag e) T ouchP AD ON/OFF scr een 5 Select Disable or Enable , whichev er is appropriate. 6 Click A pply . 7 Click OK . The Mouse P roperties windo w closes. 8 Close the Printers and Other Har[...]

70 Getting Started Using external display de vices 5.375 x 8.375 ver 2.3 Using external display devices Y our computer comes with a b uilt-in LCD display , but you can also connect an external display de vice to the a v ailable video port: ❖ An external monitor or projector via the RGB (monitor) port. ❖ A TV , VCR, or D VD recorder via the S-vi[...]

71 Getting Started Using external display de vices 5.375 x 8.375 ver 2.3 2 While holding do wn Fn , press F5 repeatedly until the setting you want take s effect. Briefly pause each time you press the F5 ke y to allo w time for the display to change. This hot ke y cycles through the settings in the follo wing order: ❖ Built-in display only ❖ Bui[...]

72 Getting Started Using an e xternal k e yboar d 5.375 x 8.375 ver 2.3 Adjusting the quality of the external display T o obtain the best picture quality from your tele vision (or other video display d e vice), you may need to adjust the video settings. See the video de vice documentation for additional confi guration steps. TECHNICAL NOTE: T o use[...]

73 Getting Started Connecting a printer 5.375 x 8.375 ver 2.3 Connecting a printer Y our printer do cumentation may require you to install the printer software before physica lly connecting the printer to your computer . If yo u do not install the software as instructed by the printer manufacturer , the printer may not function correctly . Read the[...]

74 Getting Started Connecting a printer 5.375 x 8.375 ver 2.3 Setting up a printer Some printers require a specific installati on process. Refer to your printer installation guide for instructions before completing the follo wing procedure. If your printer does not suppor t Plug and Play , follow these steps to set it up for the f irst tim e. Y ou [...]

75 Getting Started Connecting an optional external disk ette drive 5.375 x 8.375 ver 2.3 Connecting an optional ex ternal diskette drive Some operations, such as creating a password service diskette, requi re a diskette dri ve designed for use with 3.5-inch diskettes. (Sample Illustration) Opti onal e xternal USB diskette drive T o connect an optio[...]

76 Getting Started T urning of f the computer 5.375 x 8.375 ver 2.3 T urning off the computer Pressing the power button before shutting down the Windows ® operating system cou ld cause you to lose your work. Make sure the sy stem indicator panel’ s disk light and the drive-in-use light are off. If y ou turn off the power while a disk is being ac[...]

77 Getting Started T urning off the computer 5.375 x 8.375 ver 2.3 ❖ If you hav e work in progress and are not connected to a network, u se the W indo ws ® Standby or Hibernate commands to sav e your system settings so that, when you turn on the computer again, you will automatically return to where you left of f. TECHNICAL NOTE: Before using an[...]

78 Getting Started T urning of f the computer 5.375 x 8.375 ver 2.3 For info rmation on ho w to use and configure Hibernation mode see “Using and configuring Hibernation mode” on page 81 . Standby mode The Standby command places the computer into a po wer - sav ing mode. Standb y holds the current state of the comput er in system memory (RAM) s[...]

79 Getting Started T urning off the computer 5.375 x 8.375 ver 2.3 Using the T urn Off Computer or Shut Down commands Depending on the operating system installed, use the follo wing steps to turn of f your comp uter . Tu r n O f f For W ind ows ® XP Home, or either W indo ws ® XP Professional or W indo ws ® XP MCE when not connecte d to a domain[...]

80 Getting Started T urning of f the computer 5.375 x 8.375 ver 2.3 T urning off the computer more quickly Y ou can also turn of f the co mputer by sliding the po wer button to the right. T o use this method, you f irs t need to activ ate it using T oshiba’ s Power Sa ver utility . 1 Click Start , Contro l Panel , and then click Perf ormance and [...]

81 Getting Started T urning off the computer 5.375 x 8.375 ver 2.3 5 Click A pply . 6 Click OK . For more information about the Power Saver utility , see “T oshiba Power Sav er” on page 179 . Once the computer is conf igured, you can turn it of f by either sliding the po wer b utton to the right or closing the display panel, depend ing on the o[...]

82 Getting Started T urning of f the computer 5.375 x 8.375 ver 2.3 Configuring Hibernation mode options Y ou can place the computer into Hibernation mode b y either sliding the po wer b utton to the right or closing the display panel. Y ou can also sp ecify an amount of time after which the computer automatically goes into Hibernation mode. T o us[...]

83 Getting Started T urning off the computer 5.375 x 8.375 ver 2.3 Starting again from Hibernation mode T o start up the computer from Hibernation mode, slide the po wer b utton to the right until the on/of f light glows green. The computer returns to th e screen(s) you were using. If you put the computer in Hibe rnation mode b y closing the displa[...]

84 Getting Started T urning of f the computer 5.375 x 8.375 ver 2.3 2 Click the To s h i b a P o w e r S a v e r icon. 3 Click the Setup Action tab . 4 Select Standby for the options you w ant. ❖ When I press the po wer button Set this option to Standby if you want the computer to go into Standb y mode when you sliding the po wer button to the ri[...]

85 Getting Started Using your computer in tablet mode 5.375 x 8.375 ver 2.3 Closing the display panel After you ha v e turned of f the computer , close the display panel to k eep dust and dirt out of the computer . Using your computer in tablet mode One of your computer’ s features is a con vertible display that allo ws you to use the screen much[...]

86 Getting Started Using your computer in tablet mode 5.375 x 8.375 ver 2.3 (Sample Illustration) Using the computer in tablet mode T o remov e the tablet pen, pre ss it in, and then pull it out from the right side of the computer . For more information on using the computer in tablet mode, see “Using tablet mode” on page 145 . Y our computer c[...]

87 Getting Started Caring for your computer 5.375 x 8.375 ver 2.3 Caring for your computer This section gi ves tips on cleaning and mo ving your computer . For information ab out taking care of your computer’ s main battery , see “T aking care of your battery” on page 126 . Cleaning the computer Keep liquid, including clea ning fluid, out of [...]

88 Getting Started Caring for your computer 5.375 x 8.375 ver 2.3 Using a computer lock Y ou may want to secure you r computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. F or more information on purchasing a cable lock, visit accessories.toshiba.com . (Sample Illustra tion) Comput[...]

89 5.375 x 8.375 ver 2.3 Chapter 2 Learning t he Basics This chapter giv es some computing tips and provides important information about basic features. Computing tips ❖ Sa ve your w o rk frequ ently . Y our work stays in the computer’ s temporary memory until you sa ve it to the disk. If the netw ork you are using goes do wn and you must resta[...]

90 Learning the Basics Computing tips 5.375 x 8.375 ver 2.3 ❖ Back up your f iles to disks (or other remov able media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put of f back ing up because it takes time. Ho we ver , if your hard disk suddenly fails, you will lose all the data on it unless y[...]

91 Learning the Basics Using the ke yboar d 5.375 x 8.375 ver 2.3 Using the keyboard Y our computer’ s keyboard cont ains character keys, control ke ys, function k ey s, and special W indo ws ® ke ys, providing all the functionality of a full-size keyboard. (Sample Illustra tion) K eyb oar d Character keys T yping with the character keys is v er[...]

92 Learning the Basics Using the ke yboar d 5.375 x 8.375 ver 2.3 Y our computer’ s keyboard has only one Enter and one Ctrl ke y . Most of the time, this does not matter . Howe ver , some programs assign separate functions to the right and left Ctrl and Alt keys, o r to the re gular and numeric pad Enter keys on the full-sized k eyboard. Using t[...]

93 Learning the Basics Using the ke yboar d 5.375 x 8.375 ver 2.3 Windows ® special keys (Sample Illustra tion) W indows ® special ke ys Y our computer’ s keyboard has two keys that ha ve special functions in W indows ® : ❖ Win dow s ® key —Opens the Start menu ❖ A pplication key —Has a si milar function as the secondary mouse b utton[...]

94 Learning the Basics Starting a pr ogr am 5.375 x 8.375 ver 2.3 Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay ke ys. T o turn the numeric o verlay on, press Fn and F11 simultaneously . The numeric mode light on the ke yboard indicator panel glo ws when the numeric ov erlay is on. T o[...]

95 Learning the Basics Starting a pr ogram 5.375 x 8.375 ver 2.3 The ne xt three sections e xplain how to start a program from the Start menu, Explorer , and the Run dialog box. Starting a program from the Start menu When you install a progr am, the operating system usually puts an icon in the All Prog rams menu. T o start a program that has an ico[...]

96 Learning the Basics Starting a pr ogr am 5.375 x 8.375 ver 2.3 3 Click My Computer to expand th e windo w . 4 In the left part of the windo w , click the line that ends in “(C:). ” 5 In the left part of the windo w , under the C: icon, double- click the folder containing the program, in this case Program Files . Wi n d o w s ® Expl orer sho[...]

97 Learning the Basics Saving your work 5.375 x 8.375 ver 2.3 2 In the Run dialog box: ❖ If you kno w the program’ s location, type the command line. For a pr ogram in the W indows ® folder , type just the prog ram name. Otherwise, type the full f ile path. Fo r example, to access W ordPad, type: c:Program FilesWindows NTA ccessoriesW ordp[...]

98 Learning the Basics Saving your work 5.375 x 8.375 ver 2.3 Saving files 1 On the File menu of your W indo ws ® program, click Sa ve . If you are working with a document that already has a f ile name, this is all you need to do. If you cr eated a ne w document, your prog ram displays a Sav e As dia log box. Use this dialog box to specify where t[...]

99 Learning the Basics Printing your work 5.375 x 8.375 ver 2.3 Y ou may use all the letters and nu mbers on the k eyboard plus these characters: _ ^ $ ~ ! # % & { } ( ) @ and '. File names are not case-sensitiv e. Using a file extension Most programs assign an e x tension t o the f ile name that identifies the f ile as being cr eated in t[...]

100 Learning the Basics Backing up your work 5.375 x 8.375 ver 2.3 2 Open the File menu of your W indows ® program and click Print . The program displays a P rint dialog box. (Sample Imag e) Print dialo g box 3 Specify the print parameters. For e x ample, the range of pages and number of c opies to print. 4 Click Print . Backing up your work Back [...]

101 Learning the Basics Using the optical drive 5.375 x 8.375 ver 2.3 HINT : Backing up all the files on your hard disk may take a considerable amount of time and multiple CDs/DVDs. Y ou may prefer to use a high-capacity backup syste m, such as an external hard drive. Small files can be backed up on diskettes if an opt ional external disk ette dri [...]

102 Learning the Basics Using the optical drive 5.375 x 8.375 ver 2.3 TECHNICAL NOTE: Y our optical dr ive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another reg ion, the driv e will au tomatically change to play in the format of the other region. The drive will allow you to change regions four times. On the fourt[...]

103 Learning the Basics Using the optical drive 5.375 x 8.375 ver 2.3 Do not press the eject button or turn off th e computer while the drive in-use indicator light is glowing. Doing so could damag e the disc or the drive. When the disc tray is open, be ca reful not to touch the lens or the area around it. Doing so cou ld cause the drive to malfunc[...]

104 Learning the Basics Using the optical drive 5.375 x 8.375 ver 2.3 4 Grasp the tray and pull it fully open. (Sample Illustration) Drive t ray fully e xtended 5 Hold the disc b y its edges and check that it is free of dust. If the disc is dusty , clean it as described in “Caring for CD or D VD Discs” on page 109 . 6 Place the disc carefully i[...]

105 Learning the Basics Using the optical drive 5.375 x 8.375 ver 2.3 7 Gently press the disc onto the center spindle until it clicks into place. Handle DVDs and CDs carefully , making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrect ly handle the discs, you could lose data. 8 Ma[...]

106 Learning the Basics Using the optical drive 5.375 x 8.375 ver 2.3 (Sample Imag e) W indows ® Media Player scr een The W indows ® Media Player control panel w orks much like an ordinary compact disc player: ❖ T o play the CD or to pause, click the Play/pause bu tton. ❖ T o stop the CD, click the Stop bu tto n. Before putting on headphones [...]

107 Learning the Basics Using the optical drive 5.375 x 8.375 ver 2.3 2 Click the optical dri ve icon. The disc dri v e will run the CD. If your disc does not ru n using this method , try using an application that is associated with the media on the disc. For example, if it is a music CD, open W indows ® Media Player and use it to select and then [...]

108 Learning the Basics Using the optical drive 5.375 x 8.375 ver 2.3 Removing a disc with the computer on T o remov e a compact disc (CD or D VD) with the computer turned on: 1 Press the eject button on the driv e. Do not press the eject button while the in-use in dicator light is glowing. Doing so could dama ge the disc or the drive. Also, if the[...]

109 Learning the Basics T oshiba’ s online r esour ces 5.375 x 8.375 ver 2.3 Caring for CD or DVD Discs ❖ Store your discs in thei r original containers to protect them from scratches and keep them clean. ❖ Do not bend a disc or place heav y objects on top of it. ❖ Do not apply a label to, or otherwise mar the surface of, a disc. ❖ Hold a[...]

110 5.375 x 8.375 ver 2.3.2 Chapter 3 Mobile Computing This chapter cov ers all aspect s of using your computer while tra veling. T oshiba’ s energy-saver design Y our computer enters a lo w-po wer suspension mode when it is not being used, thereby conserving ener gy and saving money in the process. It has a number of other features th at enhance[...]

111 Mobile Computing Running the computer on battery power 5.375 x 8.375 ver 2.3.2 Battery Notice Battery life may v ary consid erably from specificat ions depending on product model, conf iguration, application s, po wer management settings and features utilized, as well as the natural performance v ariations produced b y the design of indi vidual[...]

112 Mobile Computing Running the computer on battery power 5.375 x 8.375 ver 2.3.2 The R T C battery po wers the R TC m emory that stores your system configuration set tings and the current time and date information. It maintains this information for up t o a month while the computer is turned off. TECHNICAL NOTE: The RTC batter y does not charge w[...]

113 Mobile Computing Char ging batteries 5.375 x 8.375 ver 2.3.2 Charging batteries The battery needs to be charged before you can u se it to po wer the computer . Never leave batteries in the batter y charger for more than a week at a time. Doing so may reduce the potential charge of the batter y . Always use the b attery charger s pecified by T o[...]

114 Mobile Computing Char ging batteries 5.375 x 8.375 ver 2.3.2 ❖ The battery is almost completely dischar ged. Leav e the po wer connected and the ba ttery should begin charging after a fe w minutes. HINT : Once the batter y is fully charged, we recommend that you operate your computer on batter y power until the batter y discharges completely [...]

115 Mobile Computing Monitoring main battery power 5.375 x 8.375 ver 2.3.2 If the R TC battery is low , the real-time clock and calendar may display the incorrect time and date, or stop wo rking. T o recharge the R TC battery , pl ug the computer into a li ve electrical outlet and leav e the computer po wered on for 24 hours. It is seldom necessar [...]

116 Mobile Computing Monitoring main battery power 5.375 x 8.375 ver 2.3.2 Batter y life and charge time may vary , dependin g upon power management settings, applications and fe atures used. ❖ Flashes amber when the main battery charge is low and it is time to rechar ge the main battery or plug in the A C adaptor . If the AC power light flashes [...]

117 Mobile Computing Monitoring main battery power 5.375 x 8.375 ver 2.3.2 (Sample Illustration) P ower and battery light locations Determining remaining batter y power Wait at least 16 seconds after turning on the co mputer before tr ying to monitor the remaining batter y power . The computer needs this time to check the batter y’ s remaining ca[...]

118 Mobile Computing Monitoring main battery power 5.375 x 8.375 ver 2.3.2 2 Click the To s h i b a P o w e r S a v e r icon. The Po wer Sa ve r Properties windo w appears. The remaining battery charge is indi cated on the left side of the dialog box. W ith repeated discharges and recharges, the battery’ s capacity gradually decreases. A frequent[...]

119 Mobile Computing Monitoring main battery power 5.375 x 8.375 ver 2.3.2 If you ha ve Hibernation mode enabled (the def ault), the computer copies the details of you r open programs and f iles to the hard disk before shut ting down. F or more information on using Hibernation, see “Hibernation mode” on page 77. Setting battery alarms Y ou can [...]

120 Mobile Computing Monitoring main battery power 5.375 x 8.375 ver 2.3.2 These po wer-savin g options contro l the way i n which the computer is conf igured. By using them, you can greatl y increase the length of time you can use the computer before you need to recharge the battery . T oshiba has combined these options into preset Power Profiles.[...]

121 Mobile Computing Monitoring main battery power 5.375 x 8.375 ver 2.3.2 2 Select an appropriate prof ile for your work en vironment or create your own custom profile. By changing the options that app ear in the Po wer Saver Properties dialog box and clicking OK , you can reconfigure that function. Y ou may choose a power -sa ving manage ment str[...]

122 Mobile Computing Changing the main battery 5.375 x 8.375 ver 2.3.2 3 Release the Fn key . The pop-up windo w disappears. Y ou are no w in the selected mode. For more information on settin g the battery Po wer Prof ile, see “T oshiba Po wer Sa ver” on page 179 . Changing the main batter y Never short circuit the battery pack by either accide[...]

123 Mobile Computing Changing the main battery 5.375 x 8.375 ver 2.3.2 Removing the battery from the computer T o remov e the battery: 1 Sa ve yo ur work. 2 Po wer off the computer or place it in Hibernatio n mode according to the instructions in “Using and configuring Hibernation mode” on page 81 . 3 Unplug and remove any cables connected to t[...]

124 Mobile Computing Changing the main battery 5.375 x 8.375 ver 2.3.2 6 Slide the battery release latch to release the battery . 7 Pull the discharg ed battery out of the computer . (Sample Illustration) Remo ving the battery If the batter y is leaking o r its case is cracked , put on protective gloves to handle it, and d iscard it immediately . A[...]

125 Mobile Computing Changing the main battery 5.375 x 8.375 ver 2.3.2 2 Insert the charged battery in to the slot until the latch clicks. The battery pack has been designed so that you cannot install it with re verse polarity . If the batter y does not slide into the slot easily , move the battery release lock to the unlocked positio n and try aga[...]

126 Mobile Computing T aking car e of your battery 5.375 x 8.375 ver 2.3.2 T aking care of your batter y The follo wing sections of fer tips on ho w to tak e care of your battery and prolo ng its life. Safety precautions ❖ If the battery pack produces an odor , ov erheats or changes color or shape while it is being used or charged, turn off the c[...]

127 Mobile Computing T aking care of your battery 5.375 x 8.375 ver 2.3.2 ❖ Charge the b attery only in t he computer or in a battery charger designated as an approv ed option. ❖ When you install the battery pack , you should hear a click when it is seated properly . ❖ Do not expose the battery pack to fire. The battery pack could explode. Ma[...]

128 Mobile Computing Disposing of used b atteries 5.375 x 8.375 ver 2.3.2 ❖ If you will not be using the system for an e xtended period, more than one month, remo ve the battery pack. ❖ Disconnect the A C adaptor wh en the battery is fully charged. Ov ercharging mak es the battery hot and shortens its life. ❖ If you are not going to use the c[...]

129 Mobile Computing T raveling tips 5.375 x 8.375 ver 2.3.2 After repeated use, the batteries will f inally lose their ability to hold a char ge and you will need to replace them. Under certain applicable laws and re gulations, it may be ille gal to dispose of old batteries by placing them in the trash. Please be kind to our shared en vironment. C[...]

130 5.375 x 8.375 ver 2.3 Chapter 4 Exploring Y o ur Computer’ s Features In this chapter , you will explor e some of the special features of your notebook compu ter . Exploring the desktop The desktop is the launching pad for ev erything you can do in the W indows ® operatin g system. Y ou use its features to start programs, f ind documen ts, s[...]

131 Exploring Y our Computer’ s Features Exploring the desktop 5.375 x 8.375 ver 2.3 Finding your way around the desktop Y our computer’ s desktop includes sev eral standard features: icons, Start b utton, taskbar , System tray , and background pattern. Icons An icon represen ts a folder , file, or program that can be quickly acti v ated b y do[...]

132 Exploring Y our Computer’ s Features Explorin g the desktop 5.375 x 8.375 ver 2.3 Start button Y ou use the Start b utton to: ❖ Start programs ❖ Access Microsoft ® Wi nd o w s ® operating system upda te ❖ Open documents ❖ Adjust system settings ❖ Find files ❖ Access W indo ws ® Help ❖ Run programs ❖ Suspend system acti vity[...]

133 Exploring Y our Computer’ s Features Setting up for communications 5.375 x 8.375 ver 2.3 Setting up for communications T o connect to the Internet, use an onlin e service, o r communicate across the tele phone lines with another computer , you need: ❖ A modem (one comes with your notebook c omputer) ❖ A telephone line ❖ A bro wser or co[...]

134 Exploring Y our Computer’ s Features Setting up for communications 5.375 x 8.375 ver 2.3 5 T o verify that the modem is set up properly , select the modem you wish to chec k, and then click Properties to bring up the d ialog box with informati on specif ic to that modem. The W indows ® operating syste m communicates with the modem and displa[...]

135 Exploring Y our Computer’ s Features Setting up for communications 5.375 x 8.375 ver 2.3 1 Plug one end of a telephone cable (purchased separately) into the modem port on the back of the computer . (Sample Illustration) Connectin g the telephone cable to the modem port 2 Connect the other end to the RJ-11 wall jack. (Sample Illustration) Conn[...]

136 Exploring Y our Computer’ s Features Setting up for communications 5.375 x 8.375 ver 2.3 No w you are ready to send a fax or use the modem to connect to an online service or the Internet. Connecting your computer to a network Y ou can connect your computer to a netw ork to increase its capabilities and functionality usin g one of its communic[...]

137 Exploring Y our Computer’ s Features Setting up for communications 5.375 x 8.375 ver 2.3 How to disable the Ethernet LAN port When your comp uter starts, W indows ® attempts to contact a Dynamic Host Configuration Protocol (DHCP) server . If the computer is not connected to a netw ork, it may pause a fe w minutes as it waits for a reply . T [...]

138 Exploring Y our Computer’ s Features An overview of using the Internet 5.375 x 8.375 ver 2.3 Y our system may come with an optional wireless LAN module. This is a technolo gy that expands wireless communication beyond networking equipment, and ca n connect many dif ferent kinds of electronic de vices without the need fo r cables. For informat[...]

139 Exploring Y our Computer’ s Features An overview of using the Internet 5.375 x 8.375 ver 2.3 The Internet The Internet is an associ ation of thousands of networks and millions of computers around the world connected b y communications lines. They all w ork together to share information. The W orld Wide Web The W orld W ide W eb (or “W eb”[...]

140 Exploring Y our Computer’ s Features An overview of using the Internet 5.375 x 8.375 ver 2.3 Connecting to the Internet T o connect to the Internet, you need: ❖ A modem and teleph one lin e, or a LAN connection ❖ A W eb bro wser ❖ An Internet Service Provider (ISP) account The Microsoft ® W eb browser Internet Explorer is automatically[...]

141 Exploring Y our Computer’ s Features An overview of using the Internet 5.375 x 8.375 ver 2.3 Y ou can also use a Search Engine, a W eb site specifically designed to help yo u look for information. Internet features The Internet of fers many types of communication tools to help you perform many tasks. ❖ Internet email T o send and receiv e e[...]

142 Exploring Y our Computer’ s Features Explor ing audio fe atur es 5.375 x 8.375 ver 2.3 Uploading to, and downloading files from, the Internet T ransferring files from one comp uter to another is termed uploading (transferring data from your computer to a site on the W eb), or do wnloading (transferring data from a site on the W eb to your com[...]

143 Exploring Y our Computer’ s Features Explorin g audio feat ur es 5.375 x 8.375 ver 2.3 Using a microphone 1 If you are using the internal microphone, which is located near the front left corner of the computer , go to step 4 . Otherwise, connect an external microphone to the computer . 2 Click Start , All Pr ograms , Accessories , Entertainme[...]

144 Exploring Y our Computer’ s Features Explor ing audio fe atur es 5.375 x 8.375 ver 2.3 6 T o hear what you just recorded, click the Play b utton. 7 T o sa ve the f ile, select Sav e from the File menu. The microphone on your computer might be set to Mute. T o check this, click Start, All Program s, Accessories, Entertainment, and then click V[...]

145 Exploring Y our Computer’ s Features Using tablet mode 5.375 x 8.375 ver 2.3 2 Using any necessary adapters, plug the cable from the headphones or external speak ers into the headphone jack. The headphone jack requires a 16-ohm stereo mini-jack. T o adjust the volume: ❖ For e xternal speakers, use th e v olume controls on each speaker . ❖[...]

146 Exploring Y our Computer’ s Features Using tablet mode 5.375 x 8.375 ver 2.3 3 Rotate the display panel clockwise 180 o (degrees). When you complete this task, the screen faces away from the ke yboard. When rotating LCD screen of your computer , be sure to slowly turn the screen in the proper direction, and not apply exc essive force or speed[...]

147 Exploring Y our Computer’ s Features Using tablet mode 5.375 x 8.375 ver 2.3 5 Fold the display panel do wn flat o ver the k eyboard. The display latch will click and lock the screen in tablet position. (Sample Illustration) F olding the display panel down flat By default, the computer desktop will automatical ly rotate to primary portrait vi[...]

148 Exploring Y our Computer’ s Features Using tablet mode 5.375 x 8.375 ver 2.3 Using tablet mode 1 Remov e the T oshiba tablet pen which is located on the right side of the computer by momentarily pressing in on the pen and then releasing it. Pull the pen from the holder . (Sample Illustra tion) Removing the T oshiba tablet pen fr om the slot o[...]

149 Exploring Y our Computer’ s Features Using tablet mode 5.375 x 8.375 ver 2.3 2 Use the T oshiba tablet pen on the tablet as you would any pointing de vice or pen. (Sample Illustration) Writing on the tablet T o learn ho w to manually cha nge the layout of the screen from portrait to landscape, see “T oshiba Rotation Utility” on page 186 .[...]

150 Exploring Y our Computer’ s Features Using PC Car ds 5.375 x 8.375 ver 2.3 ❖ T o drag a windo w to another location on the tablet, press the T oshiba tablet pen on the windo w's Tit le Bar , and then hold it while you drag it to its ne w location. When working in an applica tion, you can use the T oshiba tablet pen lik e a pen and simp[...]

151 Exploring Y our Computer’ s Features Using PC Car ds 5.375 x 8.375 ver 2.3 The PC Card slot supp orts hot swappi ng, which allo ws you to replace one PC Card with anothe r while the computer is on. Inserting a PC Card Before you insert a PC Card, re fer to the docu mentation that comes with the card to see if yo u need to do anyt hing before [...]

152 Exploring Y our Computer’ s Features Using PC Car ds 5.375 x 8.375 ver 2.3 1 Locate the PC Card eject b utton. 2 Press the PC Card eject button once to pop it out slightly , and push it in to remov e the PC Card. The PC Card ejects sli ghtly from the slot. 3 Grasp the edges of the PC Ca rd and slide it out of the slot. (Sample Illustra tion) [...]

153 Exploring Y our Computer’ s Features Using the Bridge Media Adapter Slot 5.375 x 8.375 ver 2.3 Using the Bridge Media Adapter Slot The Bridge Media Adapter Slot su pports the use of Memory Stick™ or Memory Stick™ PR O media, Secure Digital™ (SD™) Card, MMC (MultiMedia Card™), or xD-Picture Card™ media. These media can be used with[...]

154 Exploring Y our Computer’ s Features Using the Bridge Media Adapter Slot 5.375 x 8.375 ver 2.3 Removing memor y media 1 Prepare the media for remo v al by right-clicking the Safely Remov e Hardwar e icon on the system tray and then selecting the media you want to remov e. If the system is unable to prepare the media for safe remov al, a messa[...]

155 Exploring Y our Computer’ s Features Using the i.LINK® port 5.375 x 8.375 ver 2.3 Using the i.LINK ® port The i.LINK ® port on th e left side of the computer pro vides an extremely fast data transfer rate. In addition to high speed, the i.LINK ® port also supports isochronous data transfer (the deli very of data at a guaranteed rate). Thi[...]

156 Chapter 5 T oshiba Utilities Y our computer includes se veral ut ilities designed to help you to reconfigure your system to best meet your individual needs. T ogether , the se allo w you to ascertain certain system details, set additional options, or change def ault options. These utilities are described in this chapter . ❖ T oshiba Assist ?[...]

157 T oshiba Utilities T oshiba Assist 5.375 x 8.375 ver 2.3 ❖ Mouse Utility ❖ T oshiba Hardware Setup ❖ T ablet and Pen Settings ❖ T oshiba Rotation Utility ❖ Cross Menu Utility ❖ T oshiba T ablet Access Code Utility ❖ T oshiba Zooming Utility ❖ T oshiba Button Controls ❖ CD/D VD Driv e Acoustic Silencer ❖ T oshiba Accessibilit[...]

158 T oshiba Utilities T oshiba Assist 5.375 x 8.375 ver 2.3 The T oshiba Assist window appears. (Sample Image) T oshiba Assist window The T oshiba Assist of fers four cate gories of options: ❖ Connect ❖ Secure ❖ Protect & Fix ❖ Optimize[...]

159 T oshiba Utilities T oshiba Assist 5.375 x 8.375 ver 2.3 Connect The features av ailable in this category are: ❖ ConfigFree™ Conn ecti vity Doctor ❖ Start Bluetooth ® ❖ Bluetooth ® Settings ❖ Bluetooth Local COM Settings (Sample Imag e) T oshiba Assist – Connect tab[...]

160 T oshiba Utilities T oshiba Assist 5.375 x 8.375 ver 2.3 Secure The features av ailable in this category are: ❖ User password ❖ Supervisor password (Sample Imag e) T oshiba Assist window – Secur e tab[...]

161 T oshiba Utilities T oshiba Assist 5.375 x 8.375 ver 2.3 Protect & Fix The features av ailable in this category are: ❖ PC Diagnostic T ool Utility ❖ HDD Protection Utility (Sample Imag e) T oshiba Assist window – Pr otect & F ix tab[...]

162 T oshiba Utilities T oshiba Assist 5.375 x 8.375 ver 2.3 Optimize The features av ailable in this category are: ❖ T oshiba Power Sa ver ❖ Mouse Utility ❖ T oshiba Accessibility ❖ T oshiba Mobile Extension ❖ T oshiba Zooming Utility ❖ T oshiba Button Controls ❖ CD/D VD Driv e Acoustic Silencer ❖ T oshiba Hotke y Utility ❖ T osh[...]

163 T oshiba Utilities T oshiba Application Instal ler 5.375 x 8.375 ver 2.3 T oshiba Application Installer The T oshiba Application Installe r allo ws you to reinstall the driv ers and applications that were originally bundled with your computer . T o reinstall dri vers and applications: 1 Double-click the T oshiba Application Installer icon on th[...]

164 T oshiba Utilities Setting passwor ds 5.375 x 8.375 ver 2.3 4 Click Install , then follow the on-screen prompts to complete the installation process. Setting passwords Setting a password lets you w a lk aw ay from your computer , secure in the kno wledge that nobody can access your files. When you set a pa ssword, you must enter the passw ord b[...]

165 T oshiba Utilities Setting passwor ds 5.375 x 8.375 ver 2.3 T o use an instan t password, press Fn , then press F1 . This freezes the keyboard and T ouchPad, and blanks the screen. An instant password has no ef fect on an optional USB mouse or trackball. T o unlock your system, press an y ke y or touch the p ointing device and the W indows ® L[...]

166 T oshiba Utilities Using a supervisor or u ser passwor d 5.375 x 8.375 ver 2.3 3 Select the User Password icon. 4 Click Delete . 5 Follo w the on-screen instructions to remov e the user password. Using a super visor or user password A supervisor passw ord pre vents o ther users from changing hardware conf iguration options. Setting a super viso[...]

167 T oshiba Utilities Using a supervisor or user passwor d 5.375 x 8.375 ver 2.3 2 On the left side, select Secur e . (Sample Imag e) T oshiba Assist Security window 3 Select the Supervisor P assword icon. 4 Click Set . 5 Enter your password then enter it again to v e rify . 6 Click Set . 7 Click OK if you want to sa ve the password to a text f il[...]

168 T oshiba Utilities T oshiba P asswor d Utility 5.375 x 8.375 ver 2.3 4 Click Delete . 5 Follo w the on-screen instructions to remov e the supervisor password. T oshiba Password Utility The T oshiba Passw ord Utility allo ws you to set a user-le vel password in T oshiba Assist or in System Setup. T o use the T o shiba P assword utility: 1 Start [...]

169 T oshiba Utilities PC Diagnostic T ool Utility 5.375 x 8.375 ver 2.3 6 Click OK if you w ant to sav e the password to a text f ile on a diskette or media of your choice. Click Cancel if you do not want to sav e the password to a te xt file. This is kno wn as the passw ord service diskette. 7 Click OK to e xit. If you choose to set a super visor[...]

170 T oshiba Utilities HDD Pr otection Utility 5.375 x 8.375 ver 2.3 The PC Diagnostic T ool windo w appears. (Sample Imag e) PC Diagnostic T ool window 2 Select the de vices that you would lik e to test b y clicking the check box that appears to the left of the de vice. Click the + (plus) and - (minus) symbols to expand and collapse the categories[...]

171 T oshiba Utilities Fn-esse ® 5.375 x 8.375 ver 2.3 T o use the HDD Protection utility: 1 Click Start , All Pr ograms , To s h i b a , Utilities , and then click HDD Protection , or cli ck the HDD Protection icon in the Protect & Fix tab of T oshiba Assist . The HDD Protection Properties window appears. (Sample Imag e) HDD Pr otection Pr op[...]

172 T oshiba Utilities Fn-esse ® 5.375 x 8.375 ver 2.3 This section describes ho w to use the Fn-esse program to quickly access your prog rams and files. W ith Fn-esse, you can assign an Fn key combination to: ❖ Open a W indows ® operating system program ❖ Open a file in its associated program ❖ Display a customized folder of programs and/o[...]

173 T oshiba Utilities Fn-esse ® 5.375 x 8.375 ver 2.3 There are two ways to assign a k ey to open a program or document: ❖ Using drag-and-drop ❖ Using the ke yboard or poi nting de vice The method most often used is d rag-and-drop. Using drag-and-drop to assign a key T o assign a ke y to open a program or document: 1 Start both Fn-esse and W [...]

174 T oshiba Utilities Fn-esse ® 5.375 x 8.375 ver 2.3 Using the keyboard or pointing device to assign a key T o assign a ke y to open a program or document: 1 Start Fn-esse. 2 Perform one of the follo wing: ❖ Using the keyboard, press and hold the Fn key , then press the desired assignment key . ❖ Using the pointing device, mov e the cursor o[...]

175 T oshiba Utilities Fn-esse ® 5.375 x 8.375 ver 2.3 3 Click OK . Making a popup assignment 1 Select Popup to display the Appli cation Explorer dialog box. 2 Select the desired folder . The left side of the Application Explorer windo w displays the folders in the All Programs menu. The rig ht side lists the programs a nd documents in the folder [...]

176 T oshiba Utilities T oshiba Hotke y Utility 5.375 x 8.375 ver 2.3 Changing or removing existing key assignments On the Fn-esse ke yboard, click the key you wish to change with the secondary b utton. Fn-esse displays the Assignment T ype dialog box. ❖ T o change the ke y assignment, click Direct or Pop up and continue as if you were cre ating [...]

177 T oshiba Utilities T oshiba SD™ Memory Card F ormat Utility 5.375 x 8.375 ver 2.3 To s h i b a S D ™ Memor y Card Format Utility This utility is used to format SD cards used with the Br idge Media Adapte r slot. T o format an SD memory card using this utility: 1 Click Start , All Pr ograms , To s h i b a , Utilities , and then click SD Memo[...]

178 T oshiba Utilities T oshiba SD™ Memory Boot Utility 5.375 x 8.375 ver 2.3 To s h i b a S D ™ Memor y Boot Utility The T oshiba SD ™ Memory Boot Utility allo ws you to create an SD card you can use to boot up your computer . This utility also allo ws you to easily format SD Memory Cards. Refer to the online He lp documentation within the a[...]

179 T oshiba Utilities T oshiba P ower Saver 5.375 x 8.375 ver 2.3 4 Select the driv e where the SD card is loca ted. 5 Select Read from a floppy disk . 6 Click Start . T o create a bootable SD card with the Read from an image file option, you need a third-party application. Booting from a bootable SD card T o boot from a boo table SD card: 1 Creat[...]

180 T oshiba Utilities T oshiba P ower Saver 5.375 x 8.375 ver 2.3 T o access T oshiba Power Sa ver: ❖ Click Start , Contr ol Panel , P erf ormance and Maintenance , and then click T oshiba P ower Sa ver , or click the P ower Management icon in either the Optimize tab of T oshiba Assist or i n the sys tem tray . The T oshiba Po wer Sav e r Proper[...]

181 T oshiba Utilities T oshiba P ower Saver 5.375 x 8.375 ver 2.3 Preset Power Profiles The preset po wer profi les are: ❖ Full Po wer ❖ A C Optimized ❖ High Po wer ❖ Normal ❖ D VD Playback ❖ Presentation ❖ Long Life These prof iles cannot be delete d. It is not recommended to change the settings of these pr of iles. If you need a cu[...]

182 T oshiba Utilities Mouse Utility 5.375 x 8.375 ver 2.3 Mouse Utility The Mouse utility allo ws you to change your pointing device or mouse settings. T o access the Mouse utility: 1 Click Start , Contr ol Panel , and then click Mouse , or click the Mouse icon in the Optimize tab of To s h i b a Assist . The Mouse Properties screen appears. (Samp[...]

183 T oshiba Utilities T o s h i b a H a rd w a re S e t u p 5.375 x 8.375 ver 2.3 Y ou may see additional cate gories depending on your particular pointing device. F or information on these settings, see “Using the T ouchPad™” on page 67 . 2 Adjust the settings as desired, then click OK . T oshiba Hardware Setup T oshiba Hardware Setup is th[...]

184 T oshiba Utilities T o s h i b a H a rd w a re S e t u p 5.375 x 8.375 ver 2.3 ❖ Display—Allo ws you to change v arious defa ult settings for the built-in LCD di splay When the comp uter restar ts, it remembers th e last configuration. If data does not appear on the display you are using after starting in Standby Mode, press Fn + F5. ❖ CP[...]

185 T oshiba Utilities T able t and P e n Settings 5.375 x 8.375 ver 2.3 Y ou can also manually choose the Boot Priority by pressing the power b utton , then quickly pressing the F12 key , or the right or left arro w ke ys. Select the boot device icon b y pr essing the right or left arro w ke ys, then pressing the Enter key . Since the system is a [...]

186 T oshiba Utilities T oshiba Rota tion Utility 5.375 x 8.375 ver 2.3 ❖ While the Display tab can be us ed to change the screen’ s orientation and adjust screen brightness, it is recommended that you use the T oshiba Rotation Utility (see “T o shiba Rotation Utility” on page 186 ) to change the screen’ s orientation, and the T oshiba Po[...]

187 T oshiba Utilities T oshiba Rotation Utility 5.375 x 8.375 ver 2.3 The T oshiba Rotation Utility screen appears: (Sample Image) T oshiba Rotation Utility scr een 2 Select a ne w display format for either PC mode or T ablet PC mode. 3 Click OK . T oshiba recommen ds that you us e the T oshiba Rotation Utility to change screen rotation op tions a[...]

188 T oshiba Utilities Cr oss Menu Utility 5.375 x 8.375 ver 2.3 T o access T ablet and Pen Settings: From T oshiba Assist , click the T ablet and Pen Settings icon. ❖ The Settings tab allo ws you to specify whether you are left handed or right hand ed, and the menu location. ❖ While the Display tab can be used to change the screen’ s orienta[...]

189 T oshiba Utilities Cr oss Menu Utility 5.375 x 8.375 ver 2.3 T o start the Cross Menu Utility: 1 Press and hold the Cross-Function al b utton for two seconds until the followi ng screen displays. (Sample Image) Cr oss Menu Utility scr een 2 Mov e the Cross-Functional b utton up or do wn to select a menu. 3 T o select an item in a menu , mo ve t[...]

190 T oshiba Utilities T oshiba T a blet Access Code Utility 5.375 x 8.375 ver 2.3 The Cross Menu Setting window appears. (Sample Image) Cr o ss Menu Setting window 2 Click New . 3 Click Add File . 4 Bro wse for the appli cation(s) you want to add to the menu and click Open . 5 When you ha ve finished addin g applications to the menu, click OK . T [...]

191 T oshiba Utilities T oshiba Zooming Utility 5.375 x 8.375 ver 2.3 T o access the utility: 1 Click Start , All Pr ograms , To s h i b a , T ablet PC , and then click T ablet Access Code Logon Utility . The T ablet Access Code Logon Utility screen appears. ( Sa m p l e I m ag e ) T o s h i ba T ablet Access Code Logon Utility scr een 2 T o create[...]

192 T oshiba Utilities T oshiba Zoomin g Utility 5.375 x 8.375 ver 2.3 T o access the Zooming utility: 1 Click Start , All Pr ograms , To s h i b a , Utilities , and then click T oshiba Zooming Utility , or click the Zooming Utility icon in the Optimize tab of T oshiba Assi st . The T oshiba Zooming Utility Properties screen appears. ( Sa m p l e I[...]

193 T oshiba Utilities T oshiba Button Contr ols 5.375 x 8.375 ver 2.3 T oshiba Button Controls The T oshiba Button Controls allo w you to customize the T oshiba Assist and T oshiba Presentation b uttons. Those buttons are l ocated on the display . T o access T oshiba Button Controls: 1 Click the T oshiba Button Control icon in the Optimize tab of [...]

194 T oshiba Utilities CD/D VD Drive Acoustic Silencer 5.375 x 8.375 ver 2.3 CD/DVD Drive Acoustic Silencer This utility can slo w the speed of your optical dri ve to mak e it run more quietly . Y ou can use this utility to make listening to music CDs more enjo yable. When you change the CD/DVD drive to “Quiet” mode, the setting is only valid f[...]

195 T oshiba Utilities T oshiba Accessibility 5.375 x 8.375 ver 2.3 2 Click Set Quiet Mode to make the driv e run more slo wly and quietly , for listening to music or audio files on a CD. 3 Click Set Normal Mode to run the drive at normal speed, for transferring data. T oshiba Accessibility The T oshiba Accessibility utility allows you to use the F[...]

196 T oshiba Utilities T oshiba Mobile Extension 5.375 x 8.375 ver 2.3 2 Check the Use Fn-StickyK ey box. 3 Put a check mark next to the desired option. 4 Click OK . T oshiba Mobile Extension T o adjust the settin gs for docking or using the Express Port Replicator , use the T oshiba Mobile Extension utility . T o use the T o shiba Mobile Extension[...]

197 T oshiba Utilities T rusted Platform Module (TPM) 5.375 x 8.375 ver 2.3 3 Under the Display Change Service tab, you can set the default display co nf iguration you wish to use wh en docking the system to th e optional Express Port Replicator . (Sample Imag e) Display Ch ange Service tab options T rusted Platform Module (TPM) (A vailable on cert[...]

198 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 Once the TPM f iles ha ve been install ed, you will need to enable the TPM feature thro ugh your system’ s BIOS. T o enable TPM: 1 Po wer on your system while holding do wn the Esc key . 2 Press F1 when directed. 3 Press the PgDn key . 4 Press the do wn arro w ke y [...]

199 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 Fingerprint utility limitations T oshiba does not guarantee that the fingerprint ut ility technology will be completely secure or error -free. T oshiba does not guarantee that the f i ngerprint utility will accurately screen out unauthorized users at all times. T oshi[...]

200 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 8 The final templat e will be created from these three samples. If you do not us e a Windows ® password, you will be prompted to define a n ew (non-empty) one. This is not nec essary , but a password impro ves the securit y of your softwa re. If your system suppor ts[...]

201 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 Fingerprint Logon The fingerprint utility enables lo gon to your computer using f ingerprints. During us er enro llment, f ingerprint samples are sav e d and associated with the user’ s W indo ws ® user account. When the user attempts to lo g on again, the user’ [...]

202 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 T o disable/enable po wer-on security: 1 Open the Control Center and go to Settings - Po wer -on Security . (This wizard is displayed only if your system supports po wer -on security .) 2 Check the option Replace the power -on and hard drive passwords with the f inger[...]

203 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 Fingerprint Management Fingerprints are stored in memo ry during enrollment. After a fingerprint is enrolled, it is displayed with a po wer -on b utton abov e it. The b utton appears “pressed in” b y default, indicating that the corresponding finger will be used f[...]

204 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 Settings ❖ System Settings—Ope ns the Settings dialog containing v arious options for setting up the product. Most of these settings can be modified on ly b y administrators and affect all users. ❖ User Settings—Opens the User Settings dialog containing user-s[...]

205 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 Password Bank The P assword Bank stores re gistration and log on information for W eb sites and dialogs, help ing to automate the task of entering this information. Y ou enter the required information only once, during W eb page or dialog registration. When the window[...]

206 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 Registering a new Web page or dialog Y ou are logged on to the computer and want to register a ne w W eb page. T o create a new re gistration: 1 Display a W eb page you want to register . 2 Fill in the data you want to replay the next ti me you access this W eb page. [...]

207 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 Replaying registrations with multiple forms Passw ord Bank re gisters forms, not pages. If a page contains se veral forms, each form requires a separate re gistration. If a page contains se veral forms , replaying w orks as follo ws: ❖ If only one form is registered[...]

208 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 4 Select a registration. 5 Click Edit . Y ou can change the value of an item or delete the item. 6 Select the A uto submit check box to su bmit the selected registration automatically afte r replaying the registration. A warning is displayed if you attempt to re giste[...]

209 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 4 If other fingerprint data is still displayed on the list, hold down the Control ke y and select each f ingerprint until they are all selected, then click Remove . 5 Click OK to mak e the changes perm anent. 6 Check that all Fingerprint data was deleted on the Finger[...]

210 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 ❖ A void the follo wing finger conditions for enrollment or recognition as they may resu lt in fingerprint enrollment errors or a drop in the fi ngerprint recognition success rate. ❖ Soaked or swollen f inger (e.g., after taking bath) ❖ Injured finger ❖ W et f[...]

211 T oshiba Utilities F ingerprint A uthentication Utility 5.375 x 8.375 ver 2.3 Fingerprint reader limitations ❖ The f ingerprin t reader comp ares and an alyzes the u nique characteristics in a f ingerprint. Ho we v er , there may be instances where certain users are unable to register their fingerprints due to insuf ficien tly unique characte[...]

212 Chapter 6 If Somet hing G oes Wron g Some problems you may encounter wh en using your computer are relati vely easy to identify and solve. Others may require help from your netw ork administrator o r the manufacturer of the software program. This chapter aims to help you solv e man y problems b y yourself. It cov ers the problems you are most l[...]

213 If Something Goes Wrong Pr oblems that ar e easy to f ix 5.375 x 8.375 ver 2.3 2 Click the Applications tab . If a program has stopped res ponding, the words “not responding” appear besi de its name in the list. 3 Select the program you want to close, then click End Ta s k . Closing the failed program shou ld allow you to continue working. [...]

214 If Someth ing Goes Wrong Pr oblems when you turn on the computer 5.375 x 8.375 ver 2.3 T o record the details: 1 Click the Details button and select the text the operating system displays. The Details button displ ays in formation that the software manufacturer needs to h elp you solv e your problem. 2 Press Ctrl and c simultaneously to cop y t[...]

215 If Something Goes Wrong Pr oblems when you turn on the computer 5.375 x 8.375 ver 2.3 The computer starts b ut when y ou pr ess a key no thing happens. V erify that the acti ve program accepts te xt input. Try clicking your mouse on an area where yo u can type text and try typing again. Y our computer may be in Standby mo de and ha ve a softwar[...]

216 If Someth ing Goes Wrong The W indows ® operating system is not working 5.375 x 8.375 ver 2.3 If you are running on ba ttery po wer , it is recommen ded that you do not lea v e the computer in Standb y mode for long periods of time. T o char ge the battery , leav e the computer plugged into a li ve wall outlet for se veral hours. Fo r more inf[...]

217 If Something Goes Wrong The W indows ® operating system is not working 5.375 x 8.375 ver 2.3 Using Startup options to fix problems If the operating system fails to start prop erly , you may hav e to change your system’ s configuration o r verify t he startup procedure to fix the problem. T o do this, use the options in the Startup menu. T o [...]

218 If Someth ing Goes Wrong The W indows ® operating system is not working 5.375 x 8.375 ver 2.3 Internet problems My Internet connection is very slow . Many f actors contri bute to the speed with which yo u can surf the Internet. They include: modem speed, telephone line conditions, time of day (when e veryone else is surf ing, your access can b[...]

219 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 Y ou can connect to Support Online by clicking Support from the menu or by goi ng to pcsupport.t oshiba.com . Resolving a hardware conflict If you recei ve an error message telling you there is a de vice dri ver co nflict or a general hardware pr oblem, try using Wi [...]

220 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 Resolving hardware conflicts on your own Computer components need re sources to accomplish a task. A de vice, such as a disk driv e or a modem, needs a channe l to the computer’ s Central Processing Unit (CPU). It also needs a direct channel to the computer’ s mem[...]

221 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 If you install an older (legacy) de vice that the operating system cannot recognize, t he operating sy stem may ha ve diff iculty assigning resources to it. As a result, a hardware conflict can occur . Resolving conflicts There are se veral things you can do to resol[...]

222 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 3 Double-click Computer Management , then click Device Manager . 4 Select the specific de vice from the device category . T o expand a d e vice categ ory , double-click the catego ry . 5 In the toolbar , look to the far right for an icon of a monitor with a strike mar[...]

223 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 ❖ The Resou r ce tab, which lists re sources assigned to the monitor , optional extern al optical dri ve, optional external disk ette dri ve, and other po wer -using functions. This tab does not appear if the de vice is not using resources. ❖ The Dri ve r tab, wh[...]

224 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 6 If the error recurs, remov e the memory module entirely and check for the error again. If removing the memory module eliminates the error , the memory module may be faulty . If the error recurs without the memory module installed , the error is not caused b y the me[...]

225 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 The battery may not be inserted correctly in the computer . T urn off the computer , remov e the battery , clean the contacts with a soft dry cloth (if necessary) and replace the battery . See “Removing the b attery from the computer” on pag e 123 . The battery m[...]

226 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 After a period of time, the ba ttery will lose its ability to perform at maximum capacity an d will need to be replaced. This is normal for all batterie s. T o purchase a new battery pack, see your accessories information th at shipped with your computer , or vis it t[...]

227 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 Nothing happens when y ou pr ess the keys on the external k eyboard. Y ou may hav e plugged the e xternal k eyb oard in while the computer was turned on. Click Start , and then select Shut Down or T urn off co mputer , and Restart the computer using the T ouc hP ad o[...]

228 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 ❖ T ry adjusting the contrast and brightness con trols on the external monitor . ❖ Press Fn and F5 simultaneously to make sure the display priority is not set for the built-in screen. The screen does not look right. Y ou can change the display settings b y clickin[...]

229 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 3 Adjust the screen resolu tion and/or color quality . 4 Click OK . The display mode is set to Si multaneous and the external display device does not w ork. Make sure the e xternal monitor is capable of displaying at resolutions of 800 x 600 or hi gher . Devices that[...]

230 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 Error -checking Run Error-checking, which analyzes the directories , f iles and File Allocation T able (F A T) on the disk and repairs any damage it finds. T o run Error-checking: 1 Click Start , and then click My Computer . 2 Right-click the dri ve you want to check.[...]

231 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 Y ou may also be able to reco ver lost data using utility software. Consult your network administrator . Some programs run corr ectly but others do not. This is probably a conf iguration problem. If a program does not run properly , refer to its do cumentation and ch[...]

232 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 Optical drive problems Y ou cannot access a disc in the drive. If the optical dri ve is an external dri ve, make sure that the driv e’ s cable is properly connected to the computer . Make sure the tray which holds the CD-R OM or D VD-R OM is closed properly . Press [...]

233 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 Some discs run correctly b ut others do not. Check the type of disc you are usin g. The optical dri ve supports the Digital V ersatile Disc (D VD) formats D VD- R OM, D VD-R (read-only), p lus CD-R OM, CD-R (read- only), and CD-R W (read-only). If the problem is with[...]

234 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 Most PC Card problems occur during installation and setup of ne w cards. If you are ha ving troub le getting one or more of these devices to work together , se veral sections in this chapter may apply . Resource conflicts can cause problems when using PC Cards. See ?[...]

235 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 Resolving PC Card problems Here are some common prob lems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: 1 Click Start . 2 Right-click the My Computer icon (using the secondary button), and then [...]

236 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 Hot swapping (remo ving one PC Card and inserting another without turning the computer off) fails . Follo w this procedure before you remov e a PC Card: 1 Double-click the Safely Remove Hard ware icon on the System tray . 2 Select the item you wish to remo ve . 3 Clic[...]

237 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printe r is connected to a working po wer outlet, turned on and r eady (on line). Check that the printer has plenty of paper . Some printers will [...]

238 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 Modem problems This section lists common mo dem problems: The modem will not recei ve or transmit properly . Make sure the cable from the mo dem to the telephone line is firmly connected to the comp uter’ s modem port and the telephone line jack. Check the port sett[...]

239 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 Wireless networking problems This section provides general troubleshootin g tips for networking problems, specifica lly wireless (Wi-Fi) networking. The terms and conc epts used assume a basic understanding of networks, and may be for more advanced users. If you need[...]

240 If Someth ing Goes Wrong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.3 ❖ Check Control P anel's De vice Manager to v erify that the W i-Fi adapter is recognized by W indow s ® , and that the driv er is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technicia n at a late[...]

241 If Something Goes Wrong Resolving a har d war e conflict 5.375 x 8.375 ver 2.3 ❖ Click Start , and then click Run... ❖ Enter Cmd and press Enter . ❖ Enter PING 192.168.1.1 at the command prompt, and press Enter . ❖ If “Request T imed Out” or another error message appears in response, then the problem is probably W i-Fi-related. ❖ [...]

242 If Someth ing Goes Wrong D VD operating pr oblems 5.375 x 8.375 ver 2.3 The Windo ws ® XP wir eless management facility does not work. If you are using an e xternal W i-Fi adapter (a PC Card, USB adapter , or othe r v ariet y), check if the adapter comes with its o wn management utility . If it does, the utility may be disabling the W indo ws [...]

243 If Something Goes Wrong D V D oper ating pr oblems 5.375 x 8.375 ver 2.3 5 V erify that your computer re cognizes your optical drive. T o do this: Double-click the My Computer icon on the desktop. The optical dri ve should appear in the list. 6 See “Checking de vice properties” on page 222 for instructions on using De vice Manager to vie w [...]

244 If Someth ing Goes Wrong D VD operating pr oblems 5.375 x 8.375 ver 2.3 4 Next to the w ords Desktop Area , mo v e the slider to a lo wer setting, such as 800 x 600 or 640 x 480. 5 Click OK . D VD titles, games, or applic ations appear distorted. Havi ng Stretch enabled when your video resolution is set to 640 x 480 or 800 x 60 0 can cause dist[...]

245 If Something Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 6 Click None . 7 Click OK . Develop good computing habits Sa ve y our work frequently . Y ou can ne ver predict when your computer will lock, forcing you to close a progra m and lose unsav ed changes. Many software programs b uild in an automatic backup, but you should [...]

246 If Someth ing Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 Get familiar with all the user’ s guides prov ided with your computer , as well as the manuals that come with the programs and devices you purchase. Y our local computer store or book store sells a v ariety of self- help books you can us e to suppl ement the inform a[...]

247 If Something Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 4 In the Restore point description f i eld, enter a name that is descripti ve enough to be easily understood in the future, such as “Before installing Brand X Accounting app. ” Then click Cr eate . 5 Wi n d o w s ® creates the Restore Point and automatically stamps[...]

248 If Someth ing Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 Backing up your data to CDs with Windows ® XP For mo st of us, by far the most v aluable component of our computer system is the data we ha ve created with it, and stored on its hard di sk dri ve. Since problems with either hardware or software can mak e the data inac[...]

249 If Something Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 6 Drag and drop folders or indi vidual f iles from this windo w into the CD windo w . If the files do not immediately appear in the CD window , pre ss F5 (or cl ick Vi e w , Refr esh ) to prompt W indows ® to display them. Documents and other data files that y ou creat[...]

250 If Someth ing Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 Favorites (bookmarks) for Internet Explorer and other W eb browsers Follo w these steps to back up your Fa v orites for Internet Explorer (v er 5.0 or ne wer): 1 In Internet Explorer , click File , Import and Export . 2 The Import/Export W izard will appear . Click Nex[...]

251 If Something Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 General tips for installin g hardware and software Here are a few tips to help insu re safe and easy installation of ne w hardware (printers, poin ting de vices, e x ternal hard driv es, D VD writers, scanners, etc.) and software (applications lik e Microsoft Of fice an[...]

252 If Someth ing Goes Wrong If you need further assistance 5.375 x 8.375 ver 2.3 ❖ Do one installation at a time. If yo u ha ve se veral ne w items to add to your computer system, install just one at a time, creating Restore Points immediately before each successi ve installation. This will mak e it much easier to determine the origin of any ne [...]

253 If Something Goes Wrong If you need further assistance 5.375 x 8.375 ver 2.3 ❖ If the problem occurs wh ile you are running a program, consult the program’ s docume ntation for troubleshooting suggestions. Contact the soft ware co mpan y’ s technical support group for their assistance. ❖ Consult the dealer from whom you p urchased your [...]

254 If Someth ing Goes Wrong Other T oshiba Internet W eb sites 5.375 x 8.375 ver 2.3 ❖ Name and version of the program in volved in the problem along with its installation media ❖ Information about what yo u were doing when the problem occurred ❖ Exact error mes sages and wh en the y occurred For technical support, call the T oshiba Global S[...]

255 If Something Goes Wrong T oshiba’ s worldwide of fices 5.375 x 8.375 ver 2.3 T oshiba’ s worldwide offices A ustralia T oshiba (A ustralia) Pty . Limi ted 84-92 T alavera Road North Ryde NSW 2113 Sydney Australia Canada T oshiba Canada Ltd. 191 McNabb Street Markham, Ontario L3R - 8H2 Canada France T oshiba Systèmes (France) S.A. 7, Rue Am[...]

256 If Someth ing Goes Wrong T oshiba’ s worldwide off ices 5.375 x 8.375 ver 2.3 For more information on ad ditional T o shiba w orldwide locations, please visit: www .toshiba.co.jp/index.htm . Spain T oshiba Information Systems (España) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta Escalera A 28831 (Madrid) San Fernando de He[...]

257 5.375 x 8.375 ver 2.3.2 Appendix A Hot Keys Hot keys are keys th at, wh en pr essed in combination with the Fn ke y , turn system functions on and of f. Hot keys ha ve a legend on the ke y indicating the option or feature the k e y controls. V olume Mute Password security Fn + This hot ke y enables/disables v olume mute on your computer . When [...]

258 Hot Keys P asswor d security 5.375 x 8.375 ver 2.3.2 Without a password The Fn + F1 ke y combination turns of f the display and activ ates instant security . Using the pointing device or an y ke y will mak e the display’ s content reappear , if no password is set for the current user . With a password The Fn + F1 key combination turns of f th[...]

259 Hot Keys Po w e r u s a g e m o d e 5.375 x 8.375 ver 2.3.2 Maintaining security when the battery is not fully charged When the battery is not fully ch arged (e ven if the computer is operating on A C po wer) your display may rea ppear automatically after a short time. T o protect your de sktop, you must set up a screen sa ver with a password b[...]

260 Hot Keys Standby mode 5.375 x 8.375 ver 2.3.2 Standby mode Fn + This hot ke y places the computer into Standb y mode. ❖ A message box displays b y default to conf irm that the computer is entering Standby mode. Y ou can choose not to display this message box. (Sample Imag e) Sample Stand by confirmat ion box ❖ For more information about Sta[...]

261 Hot Keys Hibernation mode 5.375 x 8.375 ver 2.3.2 Hibernation mode Fn + This hot ke y places the computer into Hibernation mode. ❖ If Hibernation mode is en abled (the default) a message box displays b y defau lt to conf irm the computer is entering Hibernation mode. Y ou can choose not to display this message box. (Sample Imag e) Hibernation[...]

262 Hot Keys Display modes 5.375 x 8.375 ver 2.3.2 Display modes Display brightness Fn + This hot ke y cycles through the po wer -on display options. The display modes are: ❖ Built-in display only ❖ Built-in display and external monitor simultaneously ❖ External monitor only ❖ TV and built-in display ❖ TV only ❖ Primary and CR T ❖ Dua[...]

263 Hot Keys Disabling or enabli ng wir eless devices 5.375 x 8.375 ver 2.3.2 Disabling or enabling wireless devices (A vailable on certain models) Disabling or enabling the T ouchPad Fn + This hot ke y enables/disables the optional wireless devices installed in your computer . The wireless modes are: ❖ All disabled—This disables bo th the Blue[...]

264 Hot Keys Zooming applications in/out 5.375 x 8.375 ver 2.3.2 Zooming applications in/out Keyboard hot keys Fn + This hot ke y turns the Zooming utility to zoom- out. For more information, see “T oshiba Zooming Utility” on page 191 . Fn + This hot key turns the Zo omi ng utility to zoom-in. For more information, see “T oshiba Zooming Util-[...]

265 Appendix B P o wer Cord/Cable C o nnector s Y our notebook computer features a uni versal po wer supply you can use worldwide. This appendix sho ws the shapes of the typical A C power cord/ cable connectors for va rious parts of the world. USA and Canada UL app roved CS A ap prove d United Kingdom BS app roved Australia AS app roved Europe VD A[...]

266 5.375 x 8.375 ver 2.3 Appendix C Using ConfigFree ™ with your T oshiba Computer ConfigFree ™ is a set of utilities that mak es it easy to control communication de vices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy sw itching between locations and communication networks. For m[...]

267 Using ConfigFree™ with your T oshiba Computer Getting Started 5.375 x 8.375 ver 2.3 ❖ Profile Settings—The Prof iles utility let s you switch between network configurations. For more information, see “Profile Settings” on page 277 . ❖ ConfigFree SUMMIT —The ConfigFree SUMMIT utility is used to connect with othe r Conf igFree users[...]

268 Using ConfigFree™ with your T oshiba Computer Getting Started 5.375 x 8.375 ver 2.3 If your computer is not connected to a network, the ConfigFree icon on the taskbar is displayed with an “X.” When you st art a search for wireless de vices, Conf igFree Launcher displays on y our computer desktop . Y ou can then click the appropriate icon [...]

269 Using ConfigFree™ with your T oshiba Computer Confi gF ree Utilit ies 5.375 x 8.375 ver 2.3 (Sample Imag e) Conf igF ree Laun cher coming bac k into view ConfigFree Utilities Connectivity Doctor The Connecti vity Doctor lets you analyze you r network connections and f ix network-connection prob lems. Using Connecti vity Doctor , you can vie w[...]

270 Using ConfigFree™ with your T oshiba Computer ConfigF r ee Utilities 5.375 x 8.375 ver 2.3 ❖ Location of wireless comm unication switch (identif ied with a yello w arro w) ❖ Status of wireless communication switch (on or off) (Sample Image) Connectivity Doctor scr een Movin g the mouse pointer o v er a wired or wireless network de vice ic[...]

271 Using ConfigFree™ with your T oshiba Computer Confi gF ree Utilit ies 5.375 x 8.375 ver 2.3 If a problem or potential problem is detected, in most case s, a screen automatically dis plays sho win g you the possible cause and solution for the problem. A triangle containing an excl amation point also appears on the Connecti vity Doctor screen a[...]

272 Using ConfigFree™ with your T oshiba Computer ConfigF r ee Utilities 5.375 x 8.375 ver 2.3 Search for Wireless Devices The Search for W ireless De vices utility searches for wireless LAN and Bluetooth ® de vices currently used in the neighborhood, and displays in formation about them on a virtual map. T o search for wireless devices: 1 Click[...]

273 Using ConfigFree™ with your T oshiba Computer Confi gF ree Utilit ies 5.375 x 8.375 ver 2.3 (Sample Image) V iewing W i-F i devices Creating a new wireless connection This feature is only supporte d on systems running Windows ® XP SP2. T o add a ne w wireless connection to an Access Point: 1 Open the Search for W ireless Devices option from [...]

274 Using ConfigFree™ with your T oshiba Computer ConfigF r ee Utilities 5.375 x 8.375 ver 2.3 (Sample Image) Drag ging a device to the Access P oint (Sample Image) W ir eless settings screen 3 Enter the SSID/WEP inform ation an d connect to the device. After the Access Point is set up and add ed to the connection list, the system displays the Co[...]

275 Using ConfigFree™ with your T oshiba Computer Confi gF ree Utilit ies 5.375 x 8.375 ver 2.3 Creating a detected device wireless connection The follo wing screen sho ws an example of Bluetooth ® de vices that are detected using the Search f or Wir eless Devices option. Moving the mouse cursor ov er a de vice icon displays informatio n abou t [...]

276 Using ConfigFree™ with your T oshiba Computer ConfigF r ee Utilities 5.375 x 8.375 ver 2.3 ❖ Open the Bluetooth ® radar screen, and drag and drop the file di rectly onto the icon for that Bluet ooth ® de vice. (Sample Imag e) Dr ag ging the f ile to the Bluetooth ® device icon T o be prompted for the de vice: 1 Drag and drop the file to [...]

277 Using ConfigFree™ with your T oshiba Computer Confi gF ree Utilit ies 5.375 x 8.375 ver 2.3 Or , right-click the file and select Send to Bluetooth Devices . (Sample Image) Selectin g Send to Bluetooth ® Devices option 2 Choose a file recipient. 3 Click Send . During a file transfe r , conne cting and disconnecting to the selected device will[...]

278 Using ConfigFree™ with your T oshiba Computer ConfigF r ee Utilities 5.375 x 8.375 ver 2.3 If you visit a cl ient company o ccasionally , for example, you can set up a prof ile to match th a t en vironmen t and connect to the network. Similarly , user s who access network s in the off ice and at home can se t up profiles to handle these netwo[...]

279 Using ConfigFree™ with your T oshiba Computer Confi gF ree Utilit ies 5.375 x 8.375 ver 2.3 4 Select Capture and click OK . The Add Prof ile screen appears. 5 Enter the name of the prof ile you want to create. 6 Enter any optional comments, if desired. 7 Click Change Icon and select an icon for this prof ile. 8 Click the icon at the botto m o[...]

280 Using ConfigFree™ with your T oshiba Computer ConfigF r ee Utilities 5.375 x 8.375 ver 2.3 (Sample Image) Expanded Add Pr ofile scr een The online Help pro vides real-world examples of setting up profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune t hem as necessary[...]

281 Using ConfigFree™ with your T oshiba Computer Confi gF ree Utilit ies 5.375 x 8.375 ver 2.3 ConfigFree SUMMIT The ConfigFree SUMMIT utility is a con venient way to share files with other users and to transfer f iles between your computers at home and at w ork. This utility is faster and more dependab le than se nding the files via email . Use[...]

282 Using ConfigFree™ with your T oshiba Computer ConfigF r ee Utilities 5.375 x 8.375 ver 2.3 When a user joins the SUMMIT , their icon appears on the SUMMIT table. (Sample Image) User s attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one us er or all users attending the meeting. ❖ T o share a file with on[...]

283 Using ConfigFree™ with your T oshiba Computer Confi gF ree Utilit ies 5.375 x 8.375 ver 2.3 (Sample Imag e) Sharing a f ile with one user ❖ T o share a file with all users, drag the f ile to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center of the SUMMIT tab[...]

284 Using ConfigFree™ with your T oshiba Computer ConfigF r ee Utilities 5.375 x 8.375 ver 2.3 Participating users must be c onnected by LAN, wireless LAN, or Bluetooth ® (P AN). Firewall so ftware may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT T o host a ConfigFree SUMMIT : 1 Click the icon in the system tray . 2 Click SUMM[...]

285 Using ConfigFree™ with your T oshiba Computer Confi gF ree Utilit ies 5.375 x 8.375 ver 2.3 2 R i gh t- cl ic k the file and choose a file recipient. 3 Click Send . An Access Point may not always be a v ailable. T o f ind out ho w to use Quick Connect to la unch Conf igFree Summit, see “Direct Link T oshiba De vice” on page 287 . Quick Co[...]

286 Using ConfigFree™ with your T oshiba Computer ConfigF r ee Utilities 5.375 x 8.375 ver 2.3 T o re vie w the current T oshiba Wireless Projector settings and change them if necessary: 1 Click the icon in the system tray . 2 Mov e the mouse pointer to T oshiba Wir eless Projector (DPJ) , then click Settings . The Quick Connect properties dialog[...]

287 Using ConfigFree™ with your T oshiba Computer Confi gF ree Utilit ies 5.375 x 8.375 ver 2.3 The wireless LAN conf iguration re turns to the se ttings that were last used before the Qu ick Connect function was started: ❖ If the T o shiba W ireless Projector utility is closed. ❖ If you select T oshiba W ireless Projector (DPJ) from the Conf[...]

288 Using ConfigFree™ with your T oshiba Computer Using the Au tomatic Switc h 5.375 x 8.375 ver 2.3 Using the Automatic Switch The Automatic Switch feature allo ws the computer to automatically switch profiles th e ne xt time it is po wered on. This feature is particularly useful if you w ant your compu ter to automatically switch from th e netw[...]

289 Using ConfigFree™ with your T oshiba Computer Semi-A utomatic Switc h F eatur e 5.375 x 8.375 ver 2.3 T o use the Semi-Automatic Switch feature: 1 Right-click the icon in t he system tray . 2 Click A u to Switch . The Auto Switch dialog box appears. 3 Select the A uto Switch (SSID) tab . 4 Select the profile to be auto matically selected when[...]

290 Glossar y TECHNICAL NOTE: Some features defined in this glossary may not be av ailable on your computer . Acronyms The follo wing acronyms may appear in this user’ s guide. AC alternating current BIOS basic input/output system bps bits per second CD compact disc CD-R OM compact disc read-only memory CD-R W compact disc rewrite memory CMOS com[...]

291 Glossary 5.375 x 8.375 ver 2.3 DMA direct memory access DIMM dual inlin e memory modu le DOS disk operating system DPI dots per inch DSTN dual supertwist nem atic DV D digital versatile (or video) disc DV D - RO M digital v ersatile (or video) disc read-on ly memory ECP enhanced capabilities po rt EPR OM erasable programmable read-only memory F[...]

292 Glossary 5.375 x 8.375 ver 2.3 RAM random access memory RFI radio frequency interference RO M read-only memory RT C real-time clock SCSI small computer system interface SDRAM synchronous dynamic random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB univ ersal serial bus URL uniform [...]

293 Glossary 5.375 x 8.375 ver 2.3 application — A computer program that yo u use to perform tasks of a specific type. Applications includ e wo rd processors, spreadsheets, and database management systems. See also pro gram . B backup — A copy of a fi le, usually on a remov able disk, kept in case the original file is lost or damaged. basic inp[...]

294 Glossary 5.375 x 8.375 ver 2.3 C cache — A section of very fast memory in which frequently used information is duplicated for qu ick access. Accessing data from cache is faster than acces sing it from the computer’ s main memory . See also CPU cach e, L1 c ache, L 2 cach e. CD — An individual compact disc. See also CD-R OM. CD-R OM (compa[...]

295 Glossary 5.375 x 8.375 ver 2.3 controller — A de vice that controls the tran sfer of data fr om a computer to a peripheral device and vice versa. F or example, disk dri ves, monitors, keyboards, and printers all require control lers. CPU — See central pr ocessing unit (CPU). CPU cache — A section of v ery fa st memory re siding betw een t[...]

296 Glossary 5.375 x 8.375 ver 2.3 disk — A round, flat piece of materi al that can be magnetically influenced to hold information in digital form, and used in th e production of magnetic disks, such as diskettes and hard disk s. Compare disc. See also diskette, hard disk. disk drive — The device that reads and writes information and programs o[...]

297 Glossary 5.375 x 8.375 ver 2.3 D V D-R OM (digital versatile [or video] disc r ead-only memory) — A very high-capacity stor age medium that uses laser optics for reading data. Each D VD-ROM can hold as much data as se veral CD-R OMs. Compare CD-R OM. E emulation — A technique in w hich a de vice or program imitates another device or program[...]

298 Glossary 5.375 x 8.375 ver 2.3 frontside b us — The primary pathway (bus) between the CPU and the computer’ s main memory . Also called “system b us. ” See also bus . function k eys — The keys labeled F1 through F12, typ ically located on the keyboard. Their function is determined by the operating system and/or individual programs. G [...]

299 Glossary 5.375 x 8.375 ver 2.3 interlaced — A method of refreshing a computer screen, in which on ly ev ery other line of pixels is refres hed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device — See device . Internet — The decentralized, w orld-wide network of computers that pr[...]

300 Glossary 5.375 x 8.375 ver 2.3 M memory — T ypically refers to the computer’ s main memory , where programs are run and data is temp orarily stored and processed. Memory can be volatile and hold data temp orarily , such as RAM, or it can be non v olatile and hold data permanently , such as R OM. A computer’ s main memory is RAM. See RAM ,[...]

301 Glossary 5.375 x 8.375 ver 2.3 O online — A vailable through the computer . Online may refer to information being read from your own computer’ s hard disk, such as online documentation or online Help, or to inform ation coming from another company on a company network or the Internet. operating system — A set of programs that controls how[...]

302 Glossary 5.375 x 8.375 ver 2.3 program — A set of instructions that can be ex ecuted b y a computer . The general classes of programs (also called software) are operating system, application, an d utility . S ee also operati ng system, application, utili ty . properties — The attrib utes of an object or device. F or ex ample, the properties[...]

303 Glossary 5.375 x 8.375 ver 2.3 serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentia lly ov er a single channel. On your computer , the seri al port provides a serial interface between the computer and an appropriate device. Compare parallel. shortcut — See k e yboar d short[...]

304 Glossary 5.375 x 8.375 ver 2.3 utility — A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system managem ent. V W We b — See W orld W ide W eb . Wi- Fi — A registered trademark term of the W i-Fi Alliance which stands for W ireless Fidelity , and is an[...]

305 5.375 x 8.375 ver 2.3.2 Index Numerics 101-key ke yboard 91 A A C adaptor 47 AC p ow e r connecting adaptor 49 accessories docking solutions 155 memory 54 adding memory 54 adjusting record ing quality 144 Alt ke ys 92 audio .wav f iles 142 audio features 142 B backing up files 90 battery changing 122 charge indicator light 50 , 115 charge not l[...]

306 Index 5.375 x 8.375 ver 2.3.2 charging the battery 51 checking device properties 222 cleaning the computer 87 click 68 communications network connection 136 system resources 220 compact disc positioning 104 compact discs handling 105 inserting 103 removing 108 computer non-system disk or disk error message 216 not accessing disk driv es 215 run[...]

307 Index 5.375 x 8.375 ver 2.3.2 operation 213 warning resume failure 215 Error-checking 230 Ethernet LAN port 137 expansion capability 155 exploring the desktop 130 ext er na l monitor not working 229 mouse 72 external diskette driv e connecting 75 external display , adjusting 72 F F A T (File Allo cation T abl e) 230 FCC Notice “Declaration of[...]

308 Index 5.375 x 8.375 ver 2.3.2 connecting to 140 features 141 slow connection 218 surfing 140 uploading and downloading files 142 URL address not found 218 Internet Explor er icon 131 Internet Service Providers 139 IRQ (Interru pt Request) 22 0 ISPs 139 J jack RJ-11 135 K key changing 176 removing 176 key assignment viewing e xisting 175 key ass[...]

309 Index 5.375 x 8.375 ver 2.3.2 disabling a user 165 supervisor set up 166 types 164 passwords instant, using 164 setting 164 PC Card checklist 234 CIS (Card Information Structure) 234 computer stops working 235 configuring 152 errors 236 hot swapping fails 236 inserting 151 modem default 133 not recognized 236 problem solving 233 , 235 removing [...]

310 Index 5.375 x 8.375 ver 2.3.2 disk 229 modem not recei ving or transmitting 238 no sound 233 non-system disk or disk error 216 , 231 PC Card 233 checklist 234 error occurs 236 hot swapping fails 236 not recognized 236 slot appears dead 235 power and batteries 224 printer 237 program not responding 212 program not working properly 231 screen doe[...]

311 Index 5.375 x 8.375 ver 2.3.2 starting up the computer from Shut down 81 from Standby 84 Startup menu problem solving 217 stored data protection 2 supervisor password, deleting 167 supervisor password, set up 166 system tray 132 T T ablet and Pen Settings 18 5 tablet mode using 85 , 145 tablet pen using 85 , 149 taskbar 132 television adjusting[...]