Toshiba MK4006GAH manuale d’uso

Toshiba Corporation Digital Media Network Company Page 1 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 1.1.1.1.1.1.1.1 TOSHIBA TOSHIBA Hard Disk Drive Specification 1.8 inch Hard Disk Drive MK6006GAH/MK4006GAH /MK3006GAL Rev. 01 REF 360050398[...]

Toshiba Corporation Digital Media Network Company Page 2 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Revision History 1.8 inch Hard Disk Drive MK6006GAH/MK4006GAH/MK3006GAL Product Specification Revision Date 00 2004-07-01 Initial issue 01 2004-08-10[...]

Toshiba Corporation Digital Media Network Company Page 3 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The hard disk drive and product specifications contain essential information for the protection of users and others from possible injury and property damage and to ensure correct handling. Please check that you fully understand[...]

Toshiba Corporation Digital Media Network Company Page 4 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ● Since the drive is not designed or manufactured to be used for a system including equipment (*1) directly linked with human life, etc., Toshiba Corporation shall not be liable for this type of use. *1: Equipment directly li[...]

Toshiba Corporation Digital Media Network Company Page 5 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ■ Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. ■ Do not drop. Dropping may cause injury. ■ Do not touch sharp edges or pins of the drive. Sharp protrusi[...]

Toshiba Corporation Digital Media Network Company Page 6 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Observe the following to prevent failure, malfunction or data loss. ● Follow the specifications for 7. POWER SUPPLY (page17), 9. ENVIRONMENT (page 22, 23), etc. when using. Failure to do so may cause damage to the drive. ● [...]

Toshiba Corporation Digital Media Network Company Page 7 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved TABLE OF CONTENTS 1. SCOPE .......................................................................................................................... .............................. 11 2. GENERAL DE SCRIPTI ON...................[...]

Toshiba Corporation Digital Media Network Company Page 8 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10.4 H OST I NTERFACE T IMING ........................................................................................................................ 35 10.4.1 Program I/O Wr ite Ti ming .......................................[...]

Toshiba Corporation Digital Media Network Company Page 9 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10.8.35 Set Features (EFh) ............................................................................................................ ........ 96 10.8.36 SECURITY SET PASSW ORD (F 1h) .........................................[...]

Toshiba Corporation Digital Media Network Company Page 10 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table of Figures F IGURE 1 MK3006GAL D IMENSIONS ................................................................................................................ 20 F IGURE 2 MK6006GAH/MK4006GAH D IMENSIONS ...................[...]

Toshiba Corporation Digital Media Network Company Page 11 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 2. SCOPE This document describes the specif ications of the following model, MK3006GAL /MK4006GAH/MK6006GAH of 1.8- inch type Winchester disk drives. . Factory Number Sales Number HDD1442 MK3006GAL HDD1564 MK4006GAH HDD1544 MK[...]

Toshiba Corporation Digital Media Network Company Page 12 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ■ Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. ● There is a certain probability of the drive causing failure including data error or data loss. Take prev[...]

Toshiba Corporation Digital Media Network Company Page 13 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 4. KEY FEA TURES • High capacity in smallest size . 1.8 inch-type 2 platters accommoda ting formatted capacity of 60.0116GB (MK6006GAH)/40.000GB(MK4006GAH), 1 platter accommodating formatte d capacity of 30.0058GB(MK3006GAL)[...]

Toshiba Corporation Digital Media Network Company Page 14 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved . Low power consumption by Adaptive Power Mode Control .[...]

Toshiba Corporation Digital Media Network Company Page 15 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 5. BASIC SPECIFICA TION MODEL MK3006GAL MK6006GAH MK4006GAH Formatted Capacity ( gigabytes ) 30.0058 60.0116 40.000 Number of sectors 58, 605,120 117,210,240 78,126,048 Servo design method Sector Servo Recording method 60/61 M[...]

Toshiba Corporation Digital Media Network Company Page 16 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 6. PERFORMANCE MK3006GAL MK6006GAH MK4006GAH Access time ( msec ) <*1> Track to track seek <*2> 3 Average seek <*3> 15 Max. seek <*4> 26 Rotation speed ( RPM ) 4,200 + 0.1% Average Latency Time ( msec )[...]

Toshiba Corporation Digital Media Network Company Page 17 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 7. POWER REQUIREMENTS 7.1 Supply V oltage Allowable voltage 3.3V + 5% Allowable noise/ripple 70 mV p-p or less (note 1) W h en DC power is interrupted,+3.3V voltage drop must be greater than or equal 0V. 7.2 Power Consumption [...]

Toshiba Corporation Digital Media Network Company Page 18 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 8. MECHANICAL SPECIFICA TIONS 8.1 Dimension and weight MK3006GAL MK6006GAH/MK4006GAH Width (mm) 54.0 ± 0.2 Height (mm) 5.0 + 0.15 8.0 + 0.15 Depth (mm) 78.5 ± 0.3 Warpage (mm) Interconnected area Width (shorter side) Depth ([...]

Toshiba Corporation Digital Media Network Company Page 19 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 8.3.1 Installation 1) The drive should be interconnected of mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion. 2) The drive can be easily damaged by shocks. In order to prevent the damege[...]

Toshiba Corporation Digital Media Network Company Page 20 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Figure 1 MK3006GAL Dimensions UNIT: m m[...]

Toshiba Corporation Digital Media Network Company Page 21 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Figure 2 MK6006GAH/MK4006GAH Dimensions UNIT: mm[...]

Toshiba Corporation Digital Media Network Company Page 22 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 9. ENVIRONMENT AL LIMITS 9.1 T emperature and Humidity 9.1.1 Temperature Operating 5 o C- 60 o C G r a d i e n t 1 5 o C / Hour maximum Non- operating - 20 o C- 65 o C G r a d i e n t 1 5 o C / Hour maximum Under shipment - 40[...]

Toshiba Corporation Digital Media Network Company Page 23 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 9.4 Altitude Operating - 300 m to 3,000 m Non operating - 400 m to 15,000 m 9.5 Acoustics （ Sound Power ） MK3006GAL MK6006GAH/ MK4006GAH 16dB 18dB For idle mode ( Spindle in rotating ). 22dB 24dB Randomly select a track to[...]

Toshiba Corporation Digital Media Network Company Page 24 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 9.6 Safety S tandards The drive satisfies the following standards . MK3006GAL MK6006GAH/MK4006GAH Underwriters Laboratories (UL) 1950 Canadian Standard Association (CSA)C22.2 No.950 TUV Rheinland EN 60 950 Bureau of Standards,[...]

Toshiba Corporation Digital Media Network Company Page 25 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved EMC Adaptability The drive satisfies the following standards . MK3006GAL MK6006GAH/MK4006GAH EN5008M1-E1 EN55022 : 1998 Class B EN50081-1 EN61000-3-2 : 1995 EN61000-3-3 : 1995 EN55024 EN61000-4-2 : 1995 EN61000-4-3 : 1995 ENV5[...]

Toshiba Corporation Digital Media Network Company Page 26 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10. RELIABILITY A failure is defined as an inability of the drive to perfo rm its specified function de scribed in the requirements of this document when being operated under the normal conditions or conditions spec ified in t[...]

Toshiba Corporation Digital Media Network Company Page 27 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10.6 Load/Unload Be sure to issue and complete the following commands for unloading before cutting off the power supply. Following table shows the specific ation for normal load/unload cycles. Load/unload cycle (Times) Environ[...]

Toshiba Corporation Digital Media Network Company Page 28 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11. HOST INTERF ACE Related Standards Information technology - AT Attachment Interface with Extensi ons (ATA-2) X3T10.279-199x Information technology - AT Attachment-3 Interface (ATA-3) X3T10/2008D Revision 6 October 26, 1995 [...]

Toshiba Corporation Digital Media Network Company Page 29 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.2 Electrical specification 11.2.1 Cable length and capacitance 0.46m MAX 35pF MAX 11.2.2 DC input/output Characteristics 11.2.2.1 Input i t e m U n i t v a l u e voltage high (note 1) V 2.0 to 5.5 l o w V - 0 . 3 t o 0 . 8 [...]

Toshiba Corporation Digital Media Network Company Page 30 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3 Interface connector 11.3.1 ATA interface connector U N I T : m m Figure 3 ATA interface connector[...]

Toshiba Corporation Digital Media Network Company Page 31 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3.2 Pin Assignment The following table describes all of the pins on the Task File Interface. Table 11.3-1 Signal pin assignm ent PIN No. SIGNALS PIN No. SIGNALS 1 - RESET 2 GROUND 3 DD 7 4 DD 8 5 DD 6 6 DD 9 7 DD 5 8 DD 10 [...]

Toshiba Corporation Digital Media Network Company Page 32 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3.3 Signal Treatment Driver types and requirem ents for the signal pull - up and down are as follows. Resistor requi reme n t is mi nimu m for t he host. - IO16 is pulled up in the drive with certain value so that the Vol i[...]

Toshiba Corporation Digital Media Network Company Page 33 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3.4 Series resistance Each signal has its own series resistance. SIGNAL SERIAL RESISTANCE VALUE -DIOR 82 Ω -HDMARDY HSTROBE -DIOW 82 Ω STOP -CS0, -CS1 82 Ω DA0,DA1,DA2 82 Ω -DMACK 82 Ω DMARQ 22 Ω INTRQ 22 Ω IORDY -DD[...]

Toshiba Corporation Digital Media Network Company Page 34 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved CSEL O 28 If jumper pins B through D are assigned, Master/Slave setting w ith this pin is valid. When grounded, the drive recognizes itself as a Master. When not grounded, the drive recognizes itself as a Slave. - DMACK O 29 R[...]

Toshiba Corporation Digital Media Network Company Page 35 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4 Host Interface Timing 11.4.1 Program I/O Write Timing Transfer mode Symbol Meaning 0 1 2 3 4 t ASW Address Setup to -DOW Low (min.) 70 50 30 30 25 t DS Data Setup to -DOW High (min.) 60 45 30 30 20 t WE -DOW Pulse Width ([...]

Toshiba Corporation Digital Media Network Company Page 36 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.2 Program I/O Read Timing Transfer mode Symbol Meaning 0 1 2 3 4 t ASE Address Setup to -DIOR Low (min.) 70 50 30 30 25 t RE -DIOR Pulse Width (min.) 165 125 100 80 70 t RDSE -DIOR data setup (min.) 50 35 20 20 20 t DOH D[...]

Toshiba Corporation Digital Media Network Company Page 37 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.3 Multiword DMA Write Timing ATA/ATAPI-6 SPECIFICATIONS Transfer mode MODE 0 MODE 1 MODE 2 Symbol Meaning Min. Max. Min. Max. Min. Max. t0 Cycle time 480 150 120 t C DMACK to DMARQ delay --- --- --- t D -DIOW 16-bit 215 8[...]

Toshiba Corporation Digital Media Network Company Page 38 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.4 Multiword DMA Read Timing ATA/ATAPI-6 SPECIFICATIONS Transfer mode MODE 0 MODE 1 MODE 2 Symbol Meaning Min. Ma x. Min. Max. Min. Max. t0 Cycle time 480 150 120 t C DMACK to DMARQ delay --- --- --- t D -DIOR 16-bit 215 8[...]

Toshiba Corporation Digital Media Network Company Page 39 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.5 Ultra DMA Timing Initiating an Ultra DMA data in burst DMARQ (dev i ce) DMACK- (host) STOP (host) HDMARDY- (host) DSTROBE (dev i ce) DD(15:0) t ZAD DA0, DA 1, DA2, CS0-, CS 1- t UI t ZAD t ACK t ACK t ENV t ENV t ZI ORD[...]

Toshiba Corporation Digital Media Network Company Page 40 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Sustained Ultra DMA data in burst t DVH t DVHIC DSTROBE at dev ic e DD(15:0) at dev ic e DSTROBE at host DD(15:0) at host t CYC t CY C t DVS t DVSI C t DH t DHIC t DS t DSIC t 2CYC t 2CYC t DVH t DVHIC t DVH t DVHIC t DVS t DV[...]

Toshiba Corporation Digital Media Network Company Page 41 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Device terminating an Ultra DMA data in burst t AZ t IO RDYZ CRC DMARQ (dev i ce) DMACK- (host) STOP (host) HDMARDY- (host) DSTROBE (dev i ce) DD(15:0) DA0, DA 1, DA2, CS0-, CS 1- t ACK t LI t MLI t CVS t LI t ACK t ACK t ZAH [...]

Toshiba Corporation Digital Media Network Company Page 42 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Host terminating an Ultra DMA data in burst t CVH CRC t AZ DMARQ (dev i ce) DMACK- (host) STOP (host) HDMARDY- (host) DSTROBE (dev i ce) DD(15:0) DA0, DA 1, DA2, CS0-, CS 1- t ACK t MLI t LI t LI t I ORDYZ t ACK t ACK t ZAH t [...]

Toshiba Corporation Digital Media Network Company Page 43 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Initiating an Ultra DMA data out burst DMARQ (dev i ce) DMACK- (host) STOP (host) DDMARDY- (dev i ce) HSTROBE (host) DD(15:0) (host) DA0, DA 1, DA2, CS0-, CS 1- t UI t ACK t ENV t ZI ORDY t LI t DZFS t DVH t ACK t ACK t UI t D[...]

Toshiba Corporation Digital Media Network Company Page 44 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Sustained Ultra DMA data out burst t DH t DHIC t DVH t DVHIC HSTROBE at host DD(15:0) at host HSTROBE at dev ic e DD(15:0) at dev ic e t CYC t CY C t DVS t DVSI C t DS t DSIC t 2CYC t 2CYC t DVH t DVHIC t DVH t DVHIC t DVS t D[...]

Toshiba Corporation Digital Media Network Company Page 45 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Host terminating an Ultra DMA data out burst DMARQ (dev i ce) DMACK- (host) STOP (host) DDMARDY- (dev i ce) HSTROBE (host) DD(15:0) (host) DA0, DA 1, DA2, CS0-, CS 1- t ACK t LI t MLI t CVS t LI t LI t ACK t IO RDYZ t ACK CRC [...]

Toshiba Corporation Digital Media Network Company Page 46 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Device terminating an Ul tra DMA data out burst DMARQ (dev i ce) DMACK- (host) STOP (host) DDMARDY- (dev i ce) HSTROBE (host) DD(15:0) (host) DA0, DA 1, DA2, CS0-, CS 1- t ACK t MLI t CVS t LI t LI t ACK CRC t CVH t ACK t IO R[...]

Toshiba Corporation Digital Media Network Company Page 47 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ATA/ATAPI specifications Transfer mode MODE 0 MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 Symbo l Meaning Min. Max. Min. Max. Min. Ma x. Min. Max. Min. Max. Min. Max. t CYC Cycle time 112 73 54 39 25 16.8 t 2CYC Two cycle time 230 153 [...]

Toshiba Corporation Digital Media Network Company Page 48 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.6 Reset Timing t M t N BUSY - RE S E T Symbol Meaning Minimum Maximum Unit Condition t M RESET pulse width (Low) 25 µ s t N RESET inactive to BSY active 400 ns 11.5 Grounding HDA (Head Disk Assembly) and DC ground(ground[...]

Toshiba Corporation Digital Media Network Company Page 49 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.6 Address Decoding The host addresses the drive using programmed I/O. In this method, the required register address should be placed on the three host address lines, DA2 - DA0. An appropriate chip is selected and a read or [...]

Toshiba Corporation Digital Media Network Company Page 50 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7 Register Description In the following register descriptions, unused write bit should be treated as “don't care”, and unused read bits should be read as zeros. 11.7.1 Data Register - CS0 DA2-DA0 : 0 Read / Write T[...]

Toshiba Corporation Digital Media Network Company Page 51 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.2 Error Register - CS0 DA2-DA0 : 1 Read ONLY 11.7.2.1 Operational Mode The following descriptions are bit definitions for the oper ational mode including the error information from the last command. This command is valid [...]

Toshiba Corporation Digital Media Network Company Page 52 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.3.1 Smart command This command is used with the Smart commands to select subcommands. 11.7.4 Sector Count Register - CS0 DA2-DA0 : 2 Read / Write 11.7.4.1 Disk Access command The sector count register determines the numbe[...]

Toshiba Corporation Digital Media Network Company Page 53 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.5 Sector Number Register - CS0 DA2-DA0 : 3 Read / Write The target logical sector number (starting from 1) for Read, Write, and Verify commands is set in this register. After completion of a command, it shows the sector n[...]

Toshiba Corporation Digital Media Network Company Page 54 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.7.2 SMART commands This register should be set to C2h for SMART commands 11.7.8 Device/Head Register - CS0 DA2-DA0 : 6 Read / Write The value of this register is used to select the dr ive, Drive0 or Drive1, and head. On m[...]

Toshiba Corporation Digital Media Network Company Page 55 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.9 Status Register -CS0 DA2-DA0:7 Read only This register contains the command status. The contents of the register are updated at the completion of each command and whenever the error occurs. The host syst em reads this r[...]

Toshiba Corporation Digital Media Network Company Page 56 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.10 Command Register - CS0 DA2-DA0 : 7 Write only The command register accepts commands for the driv e to perform fixed disk operations. Commands are executed when the TASK FILE is loaded and the command register is writte[...]

Toshiba Corporation Digital Media Network Company Page 57 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.7-2 Comm and Code Command Code Command Name Hex Value PARAMETERS USED SC SN CY DRV HD FT Nop 00H X X X O X X Recalibrate 1xH X X X O X X Read Sector(s) 20/21H O O O O O X Read Sector(s) EXT 24h O O O O O X Read DMA EX[...]

Toshiba Corporation Digital Media Network Company Page 58 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.11 Alternate Status Register - CS1 DA2-DA0 : 6 Read only This register contains the same information as the stat us register in the Task File. The only difference is that this register being read does not imply interrupt [...]

Toshiba Corporation Digital Media Network Company Page 59 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved -HEAD SELECT represents one’s complement of the binary coded address of currently selected head, but does not show actual selection of the head.[...]

Toshiba Corporation Digital Media Network Company Page 60 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8 Command Descriptions The drive interprets the commands written in the comm and register by the host sy stem and executes them. This table shows the drive’s response to t he valid commands written in command-register. Co[...]

Toshiba Corporation Digital Media Network Company Page 61 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.1 Nop (00h) COMMAND CODE 0 0 0 0 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY no change HD no change SN no change SC no change FT no change LBA no change The Nop command reports the status[...]

Toshiba Corporation Digital Media Network Company Page 62 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.5 Read Sector (20h/21h) COMMAND CODE 0 0 1 0 0 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head last possible SN starting sector last possi ble [...]

Toshiba Corporation Digital Media Network Company Page 63 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.7 Write Sector (30h/31h) COMMAND CODE 0 0 1 1 0 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head last possible SN starting sector start sector S[...]

Toshiba Corporation Digital Media Network Company Page 64 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved This command is available in LBA addressing only. 11.8.9 Read Verify (40h) COMMAND CODE 0 1 0 0 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head la[...]

Toshiba Corporation Digital Media Network Company Page 65 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.11 Write Verify 6 (3Ch) COMMAND CODE 0 0 1 1 1 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head last possible SN starting sector start sector SC[...]

Toshiba Corporation Digital Media Network Company Page 66 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Sector interleave is always set to one regardless of sector sequence in the format table. Data subsequent to format table are handled as “Don't care”. FORMAT TABLE ( FIRST 86 BYT ES ) (Ex. 43 logical sector mode) 0001[...]

Toshiba Corporation Digital Media Network Company Page 67 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.15 Execute Diagnostics (90h) COMMAND CODE 1 0 0 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR OOH CY OOH HD OOH SN O1H SC O1H FT This command enables the drive to execute following self -test and reports the re[...]

Toshiba Corporation Digital Media Network Company Page 68 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.17 Download Microcode (92h) COMMAND CODE 1 0 0 0 0 0 1 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive number no change CY 00h HD no change SN number of sector(hi gh order) 00h SC number of sector(low order) 00h FT[...]

Toshiba Corporation Digital Media Network Company Page 69 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.18 Read Multiple (C4h) COMMAND CODE 1 1 0 0 0 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive number no change CY starting cylinder last possible HD st arting head last possible SN starting sector last possi bl[...]

Toshiba Corporation Digital Media Network Company Page 70 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.19 Read Multiple EXT (29h) COMMAND CODE 0 0 1 0 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change LBA Low Current Previous LBA(7:0) LBA(31:24) HOB=0 HOB=1 last address last address LBA Mid Current[...]

Toshiba Corporation Digital Media Network Company Page 71 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved After the transfer of a data block which contains a se ctor with error, the contents of the Command Block Registers are undefined. The host should retry the trans fer as individual requests to obtain valid error information.[...]

Toshiba Corporation Digital Media Network Company Page 72 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.21 Write Multiple EXT (39h) COMMAND CODE 0 0 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change LBA Low Current Previous LBA(7:0) LBA(31:24) HOB=0 HOB=1 last address last address LBA Mid Curren[...]

Toshiba Corporation Digital Media Network Company Page 73 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.23 Read DMA (C8h/C9h) COMMAND CODE 1 1 0 0 1 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head last possible SN starting sector last possi ble SC[...]

Toshiba Corporation Digital Media Network Company Page 74 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.25 Write DMA (CAh/CBh) COMMAND CODE 1 1 0 0 1 0 1 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD st arting head last possible SN starting sector last possi ble S[...]

Toshiba Corporation Digital Media Network Company Page 75 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.27 Power Control (Exh) COMMAND CODE 1 1 1 0 X X X X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY no change HD no change SN no change SC shown below 00/ FFH (for E5/98 comm and) no change (for othe[...]

Toshiba Corporation Digital Media Network Company Page 76 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.27.3 Stand-by (E2/96) This command causes the device to enter stand-by mode. If SC is non-zero then stand-by timer shall be enabled. The value in SC shall be used to determine the time programmed into the stand-by timer. [...]

Toshiba Corporation Digital Media Network Company Page 77 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.28 Read Buffer (E4h) COMMAND CODE 1 1 1 0 0 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY no change HD no change SN no change SC 00H FT no change This command transfers a specified sector of [...]

Toshiba Corporation Digital Media Network Company Page 78 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-1 Identify Informat ion WORD DESCRIPTION Hex. 0 General configuration 15 0=ATA device 14-8 Reserved 7 1=Removable cartridge device 6 1=Fixed device 5-3 Reserved 2 Response incomplete 1-0 Reserved 0040 1 Number of de[...]

Toshiba Corporation Digital Media Network Company Page 79 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-2 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex. 57-58 Current capacity in sectors (Number of current cylinders * Number of current heads * Number of current sectors per track) XXXX 59 15-9 Reserved 8 1=Mu[...]

Toshiba Corporation Digital Media Network Company Page 80 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-3 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex. 83 Command set supported. 0000h or FFFFh = command set notification not supported 15 0 (Fixed) 14 1(Fixed) 13 1=FLUSH CACHE EXT command supported 12 1=FLUSH[...]

Toshiba Corporation Digital Media Network Company Page 81 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-4 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex. 87 Command set/feature default 15 0 (Fixed) 14 1 (Fixed) 13 1 (Fixed) 12-6 Reserved 5 1=General Purpose Logging feature set supported 4 R e s e r v e d 3 1=[...]

Toshiba Corporation Digital Media Network Company Page 82 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-5 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex. 127 Removable Media Status Noti fication feature set supported 15-2 Reserved 1-0 00=Removable Media Status Notification feature set not supported 01=Removab[...]

Toshiba Corporation Digital Media Network Company Page 83 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Word descriptions: WORD 0: General configuration bit 15 0=ATA bit 14-8 Reserved bit 7 1=Removable cartridge bit 6 1=Fixed disk drive bit 5-3 Reserved bit 2 Response incomplete bit 1-0 Reserved The value for this WORD is 0040h.[...]

Toshiba Corporation Digital Media Network Company Page 84 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 47: bit 15 - 8 shall be set to 80h bit 7 - 0 Maximum number of sectors that can be transferred per interrupt on READ/WRITE MULTIPLE commands. The default value for this WORD is 8010h. WORD 48: Reserved WORD 49: Capabiliti[...]

Toshiba Corporation Digital Media Network Company Page 85 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 57-58: Total number of sectors calculated by word 54 - 56 bit31-24 by word 58 bit 7- 0 bit23-16 by word 58 bit 15- 8 bit15- 8 by word 57 bit 7- 0 bit 7- 0 by word 57 bit 15- 8 The power on values for each models are. Driv[...]

Toshiba Corporation Digital Media Network Company Page 86 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 65: Minimum multiword DMA transfer mode cycle time per word (ns) If this bit is supported, word 53 bit 1 shall be set. The value for this WORD is 0078h (120ns). WORD 66: Manufacturer recommended multiword DMA transfer cyc[...]

Toshiba Corporation Digital Media Network Company Page 87 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 83: Features/Command sets supported bit 15 0 (Fixed) bit 14 1 (Fixed) bit 13 1=FLUSH CACHE EXT command supported bit 12 1=FLUSH CACHE command supported bit 11 1=Device Configuration Overlay supported bit 10 1=48-bit Addre[...]

Toshiba Corporation Digital Media Network Company Page 88 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 86: Features / Command sets enabled bit 15-14 Reserved bit 13 1=FLUCH CACHE EXT command supported bit 12 1=FLUSH CACHE command supported bit 11 1=Device Configuration Overlay supported bit10 1=48-bit Address feature set s[...]

Toshiba Corporation Digital Media Network Company Page 89 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 90: Time required for Enhanced Security erase completion WORD 91: Current Advanced Power Management setting bit 15-8 Reserved bit 7-0 Current Advanced Power Management setting set by Set Features Command. The default valu[...]

Toshiba Corporation Digital Media Network Company Page 90 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 128: Security status bit 15-9 Reserved bit 8 the security level. 1=the security level is maximum 0=the security level is high bit 5 1=the Enhanced security erase unit feature supported bit 4 the security count has expired[...]

Toshiba Corporation Digital Media Network Company Page 91 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31 SET MAX (F9h) Individual SET MAX commands are identified by the value placed in the Features register. Table 11.8-6 shows these Features register values. But r egardless of Feature register value, the case this command[...]

Toshiba Corporation Digital Media Network Company Page 92 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31.2 Set Max Set Password F9h with the content of the Features register equal to 01h. COMMAND CODE 1 1 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change [...]

Toshiba Corporation Digital Media Network Company Page 93 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31.4 Set Max Unlock F9h with the content of the Features register equal to 03h. COMMAND CODE 1 1 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC no [...]

Toshiba Corporation Digital Media Network Company Page 94 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.32 SET MAX ADDRESS EXT (37h) COMMAND CODE 0 0 1 1 0 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change LBA Low Current Previous Max LB A(7:0) Max LBA(31:24) HOB=0 HOB=1 no change no change LBA Mid Cu[...]

Toshiba Corporation Digital Media Network Company Page 95 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.34 Read Native Max Address EXT (27h) COMMAND CODE 0 0 1 0 0 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change LBA Low Current Previous HOB=0 HOB=1 Max LBA(7:0) Max LBA(31:24) LBA Mid Current Previou[...]

Toshiba Corporation Digital Media Network Company Page 96 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.35 Set Features (EFh) COMMAND CODE 1 1 1 0 1 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC Mode Selection for Data Transfer(*2) no change FT Features(*1[...]

Toshiba Corporation Digital Media Network Company Page 97 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.36 SECURITY SET PASSWORD (F1h) COMMAND CODE 1 1 1 1 0 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC no change FT no change This command requests a trans[...]

Toshiba Corporation Digital Media Network Company Page 98 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.37 SECURITY UNLOCK (F2h) COMMAND CODE 1 1 1 1 0 0 1 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC no change FT no change This command requests the host to t[...]

Toshiba Corporation Digital Media Network Company Page 99 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.39 SECURITY ERASE UNIT (F4h) COMMAND CODE 1 1 1 1 0 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC no change FT no change This command must be issued imm[...]

Toshiba Corporation Digital Media Network Company Page 100 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.41 SECURITY DISABLE PASSWORD (F6h) COMMAND CODE 1 1 1 1 0 1 1 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY no change HD no change SN no change SC no change FT no change This command can be exec[...]

Toshiba Corporation Digital Media Network Company Page 101 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.1 SMART Read Attribute values COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN no change SC FT D0h no change This command transfers SMA[...]

Toshiba Corporation Digital Media Network Company Page 102 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Byte Description 0 Attribute ID number 01 - FFh 1-2 Status flag bit 0 (pre-failure/advisory bit) bit 0 = 0: If attribute value is less than the threshold, the drive is in advisory condition. Product life period may expired. b[...]

Toshiba Corporation Digital Media Network Company Page 103 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved BYTE 362: Off-line data collection status Value Definition 00h or 80h Off-line data collection activity was never started. 01h Reserved 02h or 82h Off-line data collection activi ty was completed without error. 03h or 83h Off[...]

Toshiba Corporation Digital Media Network Company Page 104 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved bit 3 (off-line read scanning implemented bit) If this bit is cleared to zero, the dev ice does not support off-line read scanning. If this bit is set to one, the device supports off-line read scanni ng. This bit is set to 1.[...]

Toshiba Corporation Digital Media Network Company Page 105 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.2 SMART Read Attribute thresholds COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN no change SC FT D1h no change This command transfers[...]

Toshiba Corporation Digital Media Network Company Page 106 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.3 SMART Enable Disable Attribute Autosave COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN no change SC 00h/F1h no change FT D2h no cha[...]

Toshiba Corporation Digital Media Network Company Page 107 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.5 SMART Execute Off-line Immediate COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN Subcomm and specific no change SC no change FT D4h [...]

Toshiba Corporation Digital Media Network Company Page 108 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved e) If the device is in the process of performing the subcommand routine and is interrupted by a SMART DISABLE OPERATIONS command from the host, t he device will abort the subcommand routine and service the host within two sec[...]

Toshiba Corporation Digital Media Network Company Page 109 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved LBA 0 User LBA s pace LBA max Test span 1 Starting LBA for test span 1 Ending LBA for test span 1 Tes t span 2 Starting LBA f or test span 2 Ending LBA for test s pan 2 Tes t span 3 Starting LBA for test span 3 Ending LBA for[...]

Toshiba Corporation Digital Media Network Company Page 110 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6 SMART Read Log Sector COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN Log Sector Address no change SC Number of sectors to read 00h [...]

Toshiba Corporation Digital Media Network Company Page 111 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved SMART Log Directory Byte Descriptions 0-1 SMART Logging Version 2 Number of sectors in the log at log address 1 3 Reserved 4 Number of sectors in the log at log address 2 5 Reserved … … 510 Number of sectors in the log at[...]

Toshiba Corporation Digital Media Network Company Page 112 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.2.3 Command data structure The fifth command data structure will contain the command or reset for which the error is being reported. The fourth command data structure should contain the command or reset that precede[...]

Toshiba Corporation Digital Media Network Company Page 113 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved State field values Value State x0h Unknown x1h Sleep x2h Standby x3h Ac tive/Idle with BSY cleared to zero x4h Executing SMART off-line or self-test x5h-xAh Reserved xBh-xFh Vendor unique The value of x is vendor specific and[...]

Toshiba Corporation Digital Media Network Company Page 114 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Comprehensive error log Byte First sector Subsequent sectors 0 SMART error log version Reserved 1 Error log index Reserved 2-91 First error log data structure Data structure 5n+1 92-181 Second error log data structure Data st[...]

Toshiba Corporation Digital Media Network Company Page 115 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Self-test log data structure Byte Descriptions 0-1 Self-test log data structure revision number 2-25 First descriptor entry 26-49 Second descriptor entry ..... ............ 482-505 Twenty-first descriptor entry 506-507 Vendor[...]

Toshiba Corporation Digital Media Network Company Page 116 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.4.3 Self-test index The self-test index will point to the most recent entry . Initially, when the log is empty, the index will be set to zero. It will be set to one when the first entry is made, two for the second e[...]

Toshiba Corporation Digital Media Network Company Page 117 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.5.3 Current LBA under test The Current LBA under test field shall be written with a val ue of zero by the host. As t he self-test progresses, the device shall modify this value to contain the beginning LBA of the 65[...]

Toshiba Corporation Digital Media Network Company Page 118 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.7 SMART Write Log Sector COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN Log Sector Address no change SC Number of sectors to write 00[...]

Toshiba Corporation Digital Media Network Company Page 119 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.9 SMART Disable Operations COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN no change SC no change FT D9h no change This command disabl[...]

Toshiba Corporation Digital Media Network Company Page 120 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.11 SMART Enable/Disable Automatic Off-line COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY C24Fh no change HD no change SN no change SC 00h/F8h no change FT DBh no ch[...]

Toshiba Corporation Digital Media Network Company Page 121 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.43 Read Log EXT (2Fh) COMMAND CODE 0 0 1 0 1 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change LBA Low Current Previous log address Reserved HOB=0 HOB=1 Reserved Reserved LBA Mid Current Previous S[...]

Toshiba Corporation Digital Media Network Company Page 122 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved General Purpose Log Directory Byte Descriptions 0-1 General Purpose Logging Version 2 Number of sectors in the log at log address 01h (7:0) 3 Number of sectors in the log at log address 01h (15:8) 4 Number of sectors in the l[...]

Toshiba Corporation Digital Media Network Company Page 123 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.43.2.3 Extended Error log data structure The error log is viewed as a circular buffer. When t he last supported error log se ctor has been filled, the next error shall create an error log data struct ure that replaces th[...]

Toshiba Corporation Digital Media Network Company Page 124 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Command data structure Byte Descriptions n Content of the Device Control register when the Command register was written. N+1 Content of the Features register (7:0) w hen the Command register was written. (see note) n+2 Conten[...]

Toshiba Corporation Digital Media Network Company Page 125 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved State shall contain a value indicating the state of the device when the command was written to the Command register or the reset occurred as described in the fo llo wing table. State field values Value State x0h Unknown x1h S[...]

Toshiba Corporation Digital Media Network Company Page 126 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Extended Self-test log data structure Byte First sector Subsequent sectors 0 Self-test log data struct ure revision number Reserved 1 Reserved Reserved 2 Self-test descriptor index (7:0) Reserved 3 Self-test descriptor index [...]

Toshiba Corporation Digital Media Network Company Page 127 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Life timestamp shall contain the power-on lifetime of the device in hours when the nth self-test subcommand was completed. Content of the self-test failure checkpoint byte may c ontain additional information about the self-te[...]

Toshiba Corporation Digital Media Network Company Page 128 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.1 Device Configuration Restore COMMAND CODE 1 0 1 1 0 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No. no change CY na no change HD na no change SN na no change SC na no change FT C0h no change LBA na no[...]

Toshiba Corporation Digital Media Network Company Page 129 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The DEVICE CONFIGURATION IDENTIFY command returns a 512 byte data structure via PIO data-in transfer. The content of this data structure i ndicates the selectable commands, modes, and feature sets that the device is capable o[...]

Toshiba Corporation Digital Media Network Company Page 130 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.3.1.3 Word 2: Ultra DMA modes supported Word 3 bits 5-0 contain the same information as cont ained in word 88 of the IDENTIFY DEVICE or IDENTIFY PACKET DEVICE command response. Bits 15-6 of word 3 are reserved. 11.8.4[...]

Toshiba Corporation Digital Media Network Company Page 131 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.4.1 Error outputs Register 7 6 5 4 3 2 1 0 Error na na na na na ABRT na na Sector Count na Sector Number Bit location low Cylinder Low Bit locati on high Cylinder High Word location Device/Head obs na obs DEV na Statu[...]

Toshiba Corporation Digital Media Network Company Page 132 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The format of the overlay transmitted by the device is described inTable 11.8-9. The restrictions on changing these bits is described in the text following Table 11.8-9. If any of the bit modification restrictions described a[...]

Toshiba Corporation Digital Media Network Company Page 133 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.4.2.3 Word 2: Ultra DMA modes supported Word 2 bits 15:6 are reserved. Word 2 bit 5 is cleared to disable support for Ultra DMA m ode 5 and has the effect of clearing bit 5 in word 88 of the IDENTIFY DEVICE or IDENTIF[...]

Toshiba Corporation Digital Media Network Company Page 134 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Word 7 bit 4 is cleared to disable support for the Power- up in Standby feature set and has the effect of clearing bits 5 and 6 in words 83 and 86 and clearing the value in word 94 of the IDENTIFY DEVICE or IDENTIFY PACKET DE[...]

Toshiba Corporation Digital Media Network Company Page 135 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9 Security Mode Feature Set The Security mode features allow the host to impl ement a security password system to prevent unauthorized access to the disk drive. • Following Commands are supported for this feature set . ?[...]

Toshiba Corporation Digital Media Network Company Page 136 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9.3 Security mode operation from power-on In locked mode, the drive rejects media a ccess commands until a SECURITY UNLOCK command is successfully completed. Power-on Locked m ode UNLOCK ERASE Media access Non-media PREPAR[...]

Toshiba Corporation Digital Media Network Company Page 137 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9.4 Password lost If the user password is lost and High level security is set, the drive does not allow the user to access any data. However, the drive can be unl ocked using the master password. If the user password is lo[...]

Toshiba Corporation Digital Media Network Company Page 138 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9.5 Command Table This command table shows the drive’s response to commands when the Security Function is enabled. Table 11.9-1 Security m ode comm and actions Comm and Locked mode Unlocked mode Frozen mode CHECK POWER M[...]

Toshiba Corporation Digital Media Network Company Page 139 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.10 Self-Monitoring, Analysis and Reporting T echnology Self-monitoring, analysis and reporting technology (SMART ) is the function to protect user data and to minimize the likelihood of unscheduled system downt ime that ma[...]

Toshiba Corporation Digital Media Network Company Page 140 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.11 Adaptive Power Mode Control Adaptive Power Mode Control is a function to reduc e power consumption without performance degradation. The drive supports the following Idle modes of 3 levels. The drive enters in to idle mo[...]

Toshiba Corporation Digital Media Network Company Page 141 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.12 Reset A RESET condition sets the drive ( or both drives in case of Drive0/Drive1 connection ) BSY, allowing the drive to perform the specified initia lization required for normal operation. A RESET condition can be gene[...]

Toshiba Corporation Digital Media Network Company Page 142 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.13 Drive0/Drive1 Configuration Drive address shall be set by the optional jumper of interface connector. The drive runs as Drive0 when the jumper is open or if jumper plug is set to position B-D when P28(CSEL) signal is lo[...]

Toshiba Corporation Digital Media Network Company Page 143 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.14 Cache Memory 11.14.1 Cache Operations (1) READ CACHE OPERATION Receiving a read command, the data in the buffer memory are sent to the host without access to the disk media as long as the object data reside in the buffe[...]

Toshiba Corporation Digital Media Network Company Page 144 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12. Protocol Commands can be grouped into different classes accordi ng to the protocols used for command execution. The command classes with their asso ciated protocols are defined below. For all commands, the host first chec[...]

Toshiba Corporation Digital Media Network Company Page 145 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.1 PIO data in commands Commands for this class are: • IDENTIFY DEVICE • READ BUFFER • READ SECTOR(S) (wit h and without retry) • READ SECTOR(S) EXT • READ MULTIPLE • READ MULTIPLE EXT • SMART Read Attribute V[...]

Toshiba Corporation Digital Media Network Company Page 146 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved • WRITE MULTIPLE • WRITE MULTIPLE EXT • WRITE SECTOR(S) (with and without retry) • WRITE SECTOR(S) EXT • WRITE VERIFY • SECURITY DISABLE PASSWORD • SECURITY ERASE UNIT • SECURITY SET PASSWORD • SECURITY UNLO[...]

Toshiba Corporation Digital Media Network Company Page 147 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The Write Multiple command transfers one block ( the number of sectors is defined by the Set Multiple command ) of data for each interrupt. The other commands transfer one sector of data for each interrupt. If the drive detec[...]

Toshiba Corporation Digital Media Network Company Page 148 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved b) The host writes the command code t o the Comm and register. c) The d rive sets the BSY bit . d) Wh en the drive has fini shed processing a sector (or block) of data, it cl ears the BSY bit and asserts INTRQ. e) In response[...]

Toshiba Corporation Digital Media Network Company Page 149 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.4 DMA data transfer commands Commands for this class are: • READ DMA (with and wit hout retry) • READ DMA EXT • WRITE DMA (with and without ret ry) • WRITE DMA EXT Data transfers using DMA commands diffe r in two w[...]

Toshiba Corporation Digital Media Network Company Page 150 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.5 Ultra DMA Ultra DMA protocol is used with Read DMA, and Wri te DMA commands. Ultra DMA modes are set by Set features command. Since the setting after power-up ( De fault setting ) is mode 2 of Multi Word DMA, Set Feature[...]

Toshiba Corporation Digital Media Network Company Page 151 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 3. Ultra DMA burst termination phase a) Either a sender or a recipient may terminate an Ultra DMA burst. b) Ultra DMA burst termination is not the same as command termination or completion. If an Ultra DMA burst termination o[...]

Toshiba Corporation Digital Media Network Company Page 152 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Combinational Logic Edge Trigger ed Register Device CRCOUT (15:0) CRCIN (15:0:) DD(15:0) f1-f1 6 Wo r d Clock CRCIN0 = f16 CRCIN8 = f8 XOR f13 CRCIN1 = f15 CRCIN9 = f7 XOR f12 CRCIN2 = f14 CRCIN10 = f6 XOR f11 CRCIN3 = f13 CR[...]

Toshiba Corporation Digital Media Network Company Page 153 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.6 Other timings See HOST INTERFACE section for timings which are not shown here. Table 12.6-1 Other timings. Function and Intervals Tim eout • POWER ON TIMINGS From power on to BSY=1 400 ns maxim um From Power on to BSY=[...]