Toshiba TLP251 manuale d’uso

1 Before use CONTENTS O WNER’S MANU AL 3LCD DATA PROJECTOR TLP550 TLP551 TLP250 TLP251 ( WITH DOCUMENT IMAGING CAMERA ) MENU TLP550/TLP250 ( WITH DOCUMENT IMAGING CAMERA )[...]

2 Before use CONTENTS SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within [...]

3 Before use CONTENTS IMPOR T ANT PRECA UTIONS In the spaces provided below , record the Model and Serial No. located at the bottom of your LCD projector . Model No. Serial No. Retain this information for future reference. Save Original Packing Materials The original shipping carton and packing materials will come in handy if you ever have to ship [...]

4 Before use CONTENTS IMPOR T ANT SAFETY INSTR UCTIONS CAUTION: PLEASE READ AND OBSER VE ALL W ARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT . RET AIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety . Improper use can result in electric shock or fire haz[...]

5 Before use CONTENTS 5. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. IMPOR T ANT SAFETY INSTR UCTIONS (continued) 6. W ater and Moisture Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, o[...]

6 Before use CONTENTS 11 . Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short- out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 12. Do not place the product vertically Do not use the product in the uprigh[...]

7 Before use CONTENTS 17. If glass components, including lens and lamp, should break, contact your dealer for repair service. This product incorporates glass components, including a lens and a lamp. If such parts should break, please handle with care to avoid injury and contact your dealer for repair service. The broken pieces of glass may cause to[...]

8 Before use CONTENTS IMPOR T ANT SAFETY INSTR UCTIONS (continued) 21. Do not get your hands between the camera arm and the main unit when setting the camera arm back in its original position. T o avoid injury , be careful not to get your hands caught when setting the camera arm back in its original position. Families with children should be partic[...]

9 Before use CONTENTS Power supply cord selection Plug configuration Plug type EURO UK Line voltage 220 – 240V 220 – 240V Use a 5A fuse which is approved by AST A or BSI to BSI362. Always replace the fuse cover after changing the fuse. If your line voltage is 220 to 240V , use one of the following types of cable. Plug configuration Plug type EU[...]

10 Before use CONTENTS Contents Before use SAFETY PRECAUTIONS ...................................................... 2 IMPORT ANT PRECA UTIONS ............................................... 3 IMPORT ANT SAFETY INSTRUCTIONS ............................... 4 Power supply cord selection ............................................... 9 Contents .....[...]

11 Before use CONTENTS Names of each part on the main unit Continued Infrared remote sensor Air intake Infrared remote sensor Control panel Lens shift dial Zooming le ver F ocusing r ing A C IN socket Left side Speaker Carr ying handle Open to carry the projector. Anti-theft lock hole Lens Lens cov er F oot adjuster F oot adjuster release button Ai[...]

12 Before use CONTENTS Names of each part on the main unit (continued) 34 33 42 31 27 32 60 60 27 32 60 27 32 60 32 27 43 37 42 29 TEMP indicator KEYST ONE button T o correct the k eystone distor tion of the picture. FA N indicator LAMP indicator ON indicator INPUT button ENTER button Selection buttons EXIT button V OL/ADJ buttons A UT O SET button[...]

13 Before use CONTENTS USB S-VIDEO VIDEO AUDIO COMPUTER ( Y/P B /P R ) CONTROL A UDIO jack - ( ø 3.5mm stereo mini-jack) T o enter audio signal from a computer or a video equipment. USB connector T o connect to a USB connector of a computer when using the presentation mode. CONTROL connector (RS-232C connector) T o connect a computer to control th[...]

14 Before use CONTENTS Names of each part on the remote control MENU ON / INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY 29 34 36 38 35 43 31 27 32 33 37 39 37 42 43 40 T o displa y the menu screen and/or select the operation on the menu screen. Use the selection buttons and EXIT button to enlarge[...]

15 Before use CONTENTS Loading batteries Notes Using batteries incorrectly can cause them to leak or burst. Strictly observe the following. • Install the batteries with their + and – ends facing correctly . • Do not charge, heat, disassemble, or short the batteries or throw them into a fire. • Do not leave any exhausted batteries in the rem[...]

16 Before use CONTENTS Remote control operation Point the remote control at the infrared remote sensor and press a button. Notes • The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the proje ctor ’ s remote sensor . • Operate the remote control from a position where the remot[...]

17 Installation and connections CONTENTS Floor-mounted projector placement Floor-mounted front projection Viewing a picture projected on the front of the screen from a floor installation. Floor-mounted rear projection Viewing a picture projected through the back of the screen from a floor installation. Viewer T ranslucent screen Viewer There are tw[...]

18 Installation and connections CONTENTS Place the projector on a stead y , level surface suc h as a table . T o obtain proper screen projection, place the projector so that the light beam hits the screen squarely . Floor-mounted projector placement (continued) T op view Screen Screen a 90 ° Side view 90 ° Screen Projection size (inches) 30 36 50[...]

19 Installation and connections CONTENTS Connect the power cord. • Insert one end into the AC IN socket on the projector. • Insert the other end into a wall outlet. Notes • When the projector is moved from a cold location to a warm location, or when the ambient temperature in the projection room has risen suddenly , moisture may condense on t[...]

20 Installation and connections CONTENTS Lens shift function When turning the lens shift dial, the lens moves to upward or downward and the projection position on the screen is to be adjusted. At shipping from factory , it is set to the state turned clockwise fully (the highest projection position). Refer to “ Projection on the screen ” 27 , an[...]

21 Installation and connections CONTENTS Pr ojector placement angle adjustment (Foot adjuster) Foot adjuster release button Foot adjuster The tilt of the projector can be adjusted using the foot adjuster . Adjust this when the highest position by the lens shift dia l 20 is insufficient. Refer to “ Projection on the screen ” 27 , and adjust the [...]

22 Installation and connections CONTENTS Ceiling-mounted front projection Viewing a picture projected on the front of the screen from a ceiling installation. Ceiling-mounted rear projection Viewing a picture projected through the back of the screen from a ceiling installation. Perform the “ Projection mode ” setting on the menu screen for the p[...]

23 Installation and connections CONTENTS Notes • The projector cannot be connected to a computer without an analog RGB connector . For details, refer to the computer manual. • Y ou may not be able to connect some computers to the projector . For details, consult the dealer . • When connecting to a Macintosh computer , some models may need a M[...]

24 Installation and connections CONTENTS Connecting video equipment Note The S-VIDEO connector and VIDEO jack can be used independently , but the audio input jack is used for all input sources. Y ou can project the picture from video equipment. Check that the power supplies for the projector and for the video equipment are of f before connecting th[...]

25 Installation and connections CONTENTS Connecting video equipment (continued) Y ou can project the picture from video equipment with component video output jack. Check that the power supplies for the projector and for the video equipment are of f before connecting the cables. COMPUTER connector For use as both analog RGB and Y/P B /P R input. At [...]

26 Installation and connections CONTENTS Projector operation control by a computer CONTROL connector Computer T o RS-232C port Control cable (supplied) T o CONTR OL connector Be sure to connect in the proper direction. USB S-VIDEO VIDEO AUDIO COMPUTER ( Y/P B /P R ) CONTROL Y ou can control the projector by a computer connected with the control cab[...]

27 Operations CONTENTS Preparation 1 Install and connect the projector properly . 2 T ake of f the lens cover. Press ON/ST ANDBY . The projector turns on and the ON, LAMP and F AN indicators light in green. (The LAMP indicator blinks while the lamp is warming up.) The lamp lights and the start up display appears. CAUTION – Do not look into the pr[...]

28 Operations CONTENTS Projection on the screen (continued) Press ENTER to confirm. Press EXIT to return to step 2 if you want to re-select a language. 3 Continued MENU ON / INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY K E Y S T O N E A U T O S E T E X I T ON / STANDBY VOL / ADJ E N T E R M E N [...]

29 Operations CONTENTS Select the input source by pressing INPUT repeatedly . At shipping from factory , “ Analog RGB ” connected to COMPUTER connector or “ Video ” connected to VIDEO Jack can be selected. (Y ou can select “ Camera ” when using the model with a document imaging camera.) The icon and the name of the selected input source[...]

30 Operations CONTENTS Projection on the screen (continued) 7 6 Notes (Signal sent from the computer) • If you project an image from a computer with an LCD screen while monitoring the image on the computer , the image may not be projected properly , depending on the computer model. In this case, turn off the computer display . For details on cont[...]

31 Operations CONTENTS Notes • T o change the projecting angle, adjust the foot adjuster . 21 • If the screen image suffers keystone distortion, press the KEYST ONE button to adjust the distortion. 34 • Due to lamp characteristics, flickers may occasionally occur in a picture. This is not malfunction of the unit. • The lamp may rarely burst[...]

32 Operations CONTENTS T urning the po wer off Press ON/ST ANDBY after using the projector . An instruction message for turning the power off appears on the screen and disappears after a while. When the message disappears, operation becomes invalid. Press ON/ST ANDBY again. Cooling starts. Once cooling is completed, the LAMP and F AN indicators tur[...]

33 Operations CONTENTS Notes • Automatic adjustment may not be performed properly for signals other than those computers ’ signals with which the projector is compatible. • The horizontal position, vertical position, sampling phase and sampling frequency can also be adjusted from the menu screen 46 . * Sampling frequency Analog RGB signals in[...]

34 Operations CONTENTS Correcting the keystone distortion A picture may be expanded on the upper side if projected upward from the projector lifted up by the foot adjuster . The projector can correct this keystone distortion. MENU ON / INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY K E Y S T O N E[...]

35 Operations CONTENTS Cutting off the picture and sound temporarily The image and sound of this projector can be turned off if you wish to temporarily project the image from another projector or an OHP , etc., onto the screen. Note The mute mode is cancelled if another operation is performed during the mute mode. MENU ON / INPUT ENTER CT-90106 KEY[...]

36 Operations CONTENTS Freezing the picture Y ou can freeze the image being projected. Use this function to stop moving images from a video recorder during presentations. Notes • The frozen image can be enlarged with the RESIZE buttons. The freeze mode is cancelled if any operation other than RESIZE is performed. • The freeze mode cannot be set[...]

37 Operations CONTENTS Y ou can enlarge (resize) the picture size projected. Enlarging the picture size Press RESIZE ( ). The enlargement ratio increases each time the RESIZE ( ) button is pressed. The enlargement ratio can be increased continuously by keeping the button pressed in. T o reduce the enlargement ratio, press the RESIZE ( ) button. The[...]

38 Operations CONTENTS Press PIP . A sub-picture is displayed. Press the PIP button again to turn off the sub-picture. Video or S-video images can be displayed as small images within the computer ’ s image. (Referred to as “ sub-pictures ” in this manual.) Notes • The PIP function cannot be used when a source other than an RGB input source [...]

39 Operations CONTENTS CALL Notes • The information displayed is not refreshed even if it changes. T o refresh the information, turn off the information display , then turn it back on. • The information display turns off if any other operation is performed. • The “ Lamp time ” shows an approximate time for lamp replacement. (It should not[...]

40 Operations CONTENTS Operating the presentation mode Notes • This function is available with O.S (operating system) of Windows 98/98SE, Windows Me, Windows 2000 or Mac OS9 with a USB port as standard. • When connecting to the computer ’ s USB port for the first time, a message asking you to insert the Windows98 or Windows 98SE CD-ROM may ap[...]

41 Operations CONTENTS Operating the presentation mode (continued) Adjust the projector before presentation if necessary . In the presentation mode after step 5, the projector cannot be adjusted. 4 MENU ON / INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY 3 6 5,7 3 P.MODE K E Y S T O N E A U T O S [...]

42 CONTENTS Adjustments & Settings Operating the menu screen Continued FULL Item Next Quit Adjust the image brightness. Select the image with its brightness priority or quality ( color ) priority . Correct the keystone distortion of the screen. Select the input source when changing the input. Adjust the image flicker . EXIT ENTER MENU GUIDE MEN[...]

43 CONTENTS Adjustments & Settings Operating the menu screen (continued) Analog RGB GUIDE Item Execute Quit Picture Contrast -12- -12- Bright Full Full Thru Brightness Picture mode Screen size Reset EXIT ENTER MENU Page Adjust Kind (page) of FULL MENU Items Button operation guide The current input source Adjustment display bar Choices End Selec[...]

44 CONTENTS Adjustments & Settings GUIDE MENU adjustments and settings Adjust the contrast of the picture. Adjust the brightness of the picture. Adjust the flick er of the picture. (Sampling clock phase adjustment) The picture is set with its brightness prior ity . The picture is set with its color quality priority . Adjust the ke ystone distor[...]

45 CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Picture Adjust the contrast of the picture. Adjust the brightness of the picture. Adjust the sharpness of the picture. (In Y/P B /P R input mode, sharpness is a setting item.) The picture is set with its brightness prior ity . The picture is set with its color quality prior[...]

46 CONTENTS Adjustments & Settings FULL MENU adjustments - Position Adjust the horizontal display position of the picture . Adjust the vertical display position of the picture. Adjust the flick er of the picture. (Sampling clock phase adjustment) Adjust the sampling frequency of the input signal if vertical stripes appear in the detailed image.[...]

47 CONTENTS Adjustments & Settings FULL MENU adjustments - Color Adjust the color depth of the picture. Adjust the tint of the picture. (Not adjustable at P AL, SECAM, P AL-N,P AL-M and P AL60) Adjust the red lev el of the picture. Adjust the green le vel of the picture. Adjust the blue le vel of the picture. Return the adjustments of FULL MENU[...]

48 CONTENTS Adjustments & Settings FULL MENU adjustments and settings - A udio Adjust the sound volume emitted from the speak er. The sound is emitted from the speaker . No sound is emitted from the speaker . Return the adjustments and settings of FULL MENU [Audio] to the f actor y default v alues. The loudness effect is added to the speak er s[...]

49 CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Display Adjust the ke ystone distor tion caused by changing the installation angle. Menus and messages are displa yed in English. Menus and messages are displa yed in F rench. Menus and messages are displa yed in P or tuguese. Menus and messages are displa yed in Japanese .[...]

50 CONTENTS Adjustments & Settings FULL MENU settings - Default setting Return the settings of FULL MENU [Default setting] to the f actor y default v alues. The projector is set to the floor-mounted front projection mode. The projector is set to the floor-mounted rear projection mode. The projector is set to the ceiling-mounted front projection[...]

51 CONTENTS Adjustments & Settings FULL MENU settings - Reset Return the adjustments and settings of all menus to the factory default setting. Reset all EXEC. Y ou can return the adjusting and setting values of all menus to the factory default setting. Note The resettings made are memorized automatically when the power is turned off by pressing[...]

52 CONTENTS Adjustments & Settings PIP menu setting Return the settings of PIP MENU to the factory default setting. Select the signal source for PIP sub-picture . Set the PIP sub-picture size. : Video input is selected as signal source. : S-Video input is selected as signal source. : The PIP sub-picture size is set to small. : The PIP sub-pictu[...]

53 CONTENTS Document imaging camera Camera head Camera lens Arm Infrared remote sensor LED light Camera control panel F ocusing r ing LOCK (W .BALANCE) indicator Lights when the white balance is lock ed. W .BALANCE b utton T o switch white balance settings betw een automatic adjustment and lock. ARM LIGHT button T o tur n on or off the light. CAMER[...]

54 CONTENTS Document imaging camera Note Never give shocks or impacts to the camera or arm as this may cause malfunction. Preparation of the document imaging camera 1) Raise up the arm. Bef ore preparations (stowed a wa y) 2) Pull up the camera head. 3) T ur n the camera head. 4) Incline the arm backward. 6) Pull up the light. 7) T ur n the light. [...]

55 CONTENTS Document imaging camera Picture projection with the document imaging camera CAMERA ARM LIGHT LOCK W.B ALANCE CAMERA GAIN 1 CAUTION Do not look into the arm light while it is lit. Preparation 1 Project a picture on the screen as explained in the step “ Projection on the screen ” . 27 Press ARM LIGHT . The light turns on. 1 ARM LIGHT [...]

56 CONTENTS Document imaging camera Press CAMERA to select the camera input mode. • Pressing CAMERA again will return the input selection to the previous mode. • Y ou can also select it by pressing INPUT on the remote control or on the main unit. Set the input source on the menu screen when selecting by the INPUT button. 29 • The CAMERA butto[...]

57 CONTENTS Document imaging camera Press CAMERA GAIN (+/-) to improve view of a camera subject which is too dark or vivid. 6 Notes • Y ou can adjust the “ Sharpness ” of the camera image on the menu screen. 45 • If the image flickers due to a fluorescent light in the room, either turn off the fluorescent light or set the “ Shutter ” on[...]

58 CONTENTS Document imaging camera This projector ’ s camera is always being adjusted automatically for projected color balance; however , the balance can shift away from optimum due to the color scheme of the document. Should this occur , the white balance can be set to a fixed condition by using the following procedure. 1 Project a white paper[...]

59 CONTENTS Document imaging camera With the document camera operating, fully cover the camera lens with a piece of black paper or cloth. 1 Correcting illuminated defects Note Do not press ARM LIGHT and EXIT buttons simultaneously if the camera lens is not covered. Doing so will not only erase the white spot correction data already set but also res[...]

60 Maintenance CONTENTS If there is some problem inside the projector , the indicators light up or blink. T roub le indications Indicators Or (Lit in red) (Off) ON LAMP TEMP FA N (Lit in red) (Lit in red) ON LAMP TEMP FA N (Flashing in orange) ON LAMP TEMP FA N (Lit in red) ON LAMP TEMP FA N (Lit in red) Or (Lit or flashing in red) (Lit or flashing[...]

61 Maintenance CONTENTS Air filter cleaning CAUTION If you use the projector mounted on the ceiling, ask the dealer to carry out the maintenance such as cleaning. The filter inside the air filter cover is the part to shut out dusts or dregs. Do not use the projector with the filter taken off. We recommend you clean the air filter frequently . (The [...]

62 Maintenance CONTENTS Air filter cleaning (continued) Mount the air filter and the filter frame. Place the air filter in the projector , then insert the four tabs on the filter frame into the holes in the projector . Mount the front co ver . Insert the hooks of the front cover into the projector first, then slide it to the lens side to fix it. 5 [...]

63 Maintenance CONTENTS Cleaning the lens Use a blower or a lens cleaner to clean the lens. Never rub or tap the lens with a hard object as the lens surface is fragile. Lens and main unit cleaning Cleaning the main unit • Pull out the power cord before cleaning. • Use a soft cloth to wipe off stains from the surface. • T o remove difficult st[...]

64 Maintenance CONTENTS Lamp replacement The lamp will eventually begin to project dark or dull pictures and finally will not light up. (Lamp ’ s life depends on operating conditions.) In such a case, replace the lamp with new one. CAUTION • If you use the projector mounted on the ceiling, ask the dealer to carry out the maintenance such as cle[...]

65 Maintenance CONTENTS Notes • When the CALL button is pressed, the “ Lamp time ” (the approximate amount of time the lamp has been used) will be displayed. 39 • The lamp should be replaced if the total working time exceeds about 1,500 hours. When the “ Lamp time ” is displayed as 1500 hours, the icon and a message appear . They will d[...]

66 Others CONTENTS Before calling service personal Symptom The power does not come on. The power turns off while using the projector . No image appears. No sound is heard. Desired input source cannot be selected by the INPUT button. Analog RGB input or Y/P B /P R input colors are not right. The image is blurred. Focusing is uneven. The picture is d[...]

67 Others CONTENTS Symptom The remote control does not work. The presentation made cannot be used from the remote control unit. Document camera image is blurry . Document camera image flickers. Cause • The remote control is not facing the remote sensor . • The remote control is too far away . • There is an obstruction between the remote contr[...]

68 Others CONTENTS Mini D-sub 15pin connector Pin assignment of COMPUTER connector COMPUTER Input signal Analog R, G, B signal: 0.7V(p-p) 75 Ω Horizontal sync signal: TTL level (positive/negative polarity) V ertical sync signal: TTL level (positive/negative polarity) Y signal: 1.0V(p-p) 75 Ω P B , P R signal: 0.7V(p-p) 75 Ω Pin No. 1 2 3 4 5 [...]

69 Others CONTENTS TEXT70 640 x 350 50 640 14 96 800 31.469 70.086 25.175 59 350 38 2 449 TEXT70 640 x 400 50 640 14 96 800 31.469 70.086 25.175 34 400 13 2 449 TEXT85 640 x 350 96 640 32 64 832 37.861 85.080 31.500 60 350 32 3 445 TEXT85 640 x 400 96 640 32 64 832 37.861 85.080 31.500 41 400 1 3 445 NEC PC98 24k 640 x 400 85 640 59 64 848 24.820 5[...]

70 Others CONTENTS Applicable signal (continued) T iming chart (Continued) **SXGA1152x864 75Hz 1152 x 864 256 1152 64 128 1600 67.500 75.000 108.000 32 864 1 3 900 **SXGA1280x960 60Hz 1280 x 960 312 1280 96 112 1800 60.000 60.000 108.000 36 960 1 3 1000 **SXGA1280x960 85Hz 1280 x 960 224 1280 64 160 1728 85.938 85.002 148.500 47 960 1 3 1011 **SXGA[...]

71 Others CONTENTS Controlling the projector by using RS-232C Y ou can also control the projector by entering the command from a computer via RS-232C. CONTROL RS-232C Command list RS-232C 9600 bps, No parity , Data length: 8 bits, Stop bit: 1 bit STX (02h) Command (3Byte) ETX (03h) One command only can be used per communication. Commands shall be c[...]

72 Others CONTENTS Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Selection Adjustment Analog RGB Video S-Video Y/P B /P R Camera Command Command Picture Video mode A uto. KV0 - - Y es Y es - - (Continued) NTSC KV1 - - Y es Y es - - P AL KV2 - - Y es Y es - - SECAM KV3 - - Y es Y es - - P AL-N KV4 - - Y[...]

73 Others CONTENTS Controlling the projector by using RS-232C (continued) Continued Classification Items/Status Selection Adjustment Analog RGB Video S-Video Y/P B /P R Camera Command Command A udio V olume Increase VLU - Y es Y es Y es Y es - Decrease VLD - Y es Y es Y es Y es - Speaker output On AS1 - Y es Y es Y es Y es - Off AS0 - Y es Y es Y e[...]

74 Others CONTENTS Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Selection Adjustment Analog RGB Video S-Video Y/P B /P R Camera Command Command Def ault setting COMPUTER On I10 - Y es Y es Y es Y es Y es Off I11 - Y es Y es Y es Y es Y es Analog RGB IS0 - Y es Y es Y es Y es Y es Y/P B /P R IS1 - Y es[...]

75 Others CONTENTS Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Selection Adjustment Analog RGB Video S-Video Y/P B /P R Camera Command Command RESIZE Increase the enlargement ratio R UP - Y es Y es Y es Y es Y es Decrease the enlargement ratio (Minimum: reset status) RD W - Y es Y es Y es Y es Y es M[...]

76 Others CONTENTS Specifications Main unit Power consumption TLP550/TLP250: 240W (Standby: 15W) TLP551/TLP251: 250W (Standby: 15W) Mass TLP550/TLP250: 3.7kg TLP551/TLP251: 4.3kg Dimensions TLP550/TLP250: 260 x 95.5 x 295 (mm) (Except the protrusion parts) (W/H/D) TLP551/TLP251: 260 x 95.5 x 352 (mm) (W/H/D) Cabinet Material PC+ABS resin and ABS re[...]

77 Others CONTENTS Sold separately Replacement lamp TLPL55 • The design and specifications are subject to change without notice. T rademarks NEC, PC-98 series are trademarks of NEC Corporation. VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of International Business Machines Corporation. Macintosh is a registered trademark of [...]