TP-Link TD-8816 manuale d’uso

TD-8816 ADSL2+ Modem Router Rev:2.0.0 1910010536[...]

COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other br ands and product names are trademarks or registered trademarks of t heir respective holders. No part of the specificat ions may be reproduced in any form or b y any means or used to make any derivativ[...]

FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limit s are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment ge nerates, uses and can radiate radio frequency energy and, if [...]

CONTENTS Package Cont ents .................................................................................................... 1 Chapter 1. Introducti on ........................................................................................ 2 1.1 Product Overview ...................................................................................[...]

4.6 Maintenance ............................................................................................................ 44 4.6.1 Administration ................................................................................................................. 45 4.6.2 Time Zone ....................................................................[...]

TD-8816 ADSL2+ Modem Router User Guide 1 Package Contents The following items should be found in your package: ¾ One TD-8816 ADSL2+ Modem Router ¾ One Power Adapter for TD-8816 ADSL2+ Modem Router ¾ Quick Installation Guide ¾ One RJ45 cable ¾ Two RJ11 cables ¾ One ADSL splitter ¾ One Resource CD , including: z This User Guide z Other Helpful[...]

TD-8816 ADSL2+ Modem Router User Guide 2 Chapter 1. Introduction Thank you for choosing the TD-8816 ADSL2+ Modem Router . 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The Router is easy to use. The TD-8816 connects to an Ethernet LAN or computers via stan[...]

TD-8816 ADSL2+ Modem Router User Guide 3 ¾ Real-time Configurati on and device monitoring. ¾ Supports Multiple PVC (Per manent Virtual Circuit). ¾ Built-in DHCP server. ¾ Built-in firewall, supports IP/MAC filter, Application filter and URL filter. ¾ Supports Virtual Server, DMZ host and IP Address Mapping. ¾ Supports Dynamic DNS, UPnP and St[...]

TD-8816 ADSL2+ Modem Router User Guide 4 Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel, which indicate the device’s working status. For details, please refer to LED Explanation . LED Explanation: Name Status Indication On The modem router is powered on. Power Off The modem router is off. Pl eas[...]

TD-8816 ADSL2+ Modem Router User Guide 5 2.2 The Back Panel Figure 2-2 ¾ ON/OFF : The switch for the power. ¾ POWER : The Power plug is where yo u will connect the power adapter. ¾ LAN : Through the port, you can connect the Router to your PC or the other Ethernet network devices. ¾ RESET : There are two ways to reset the Router's factory [...]

TD-8816 ADSL2+ Modem Router User Guide 6 • PHONE: Connect to the phone sets • MODEM: Connect to the ADSL LINE port of TD-8816 Plug one end of the twisted-pair ADSL cable into the ADSL LI NE port on the rear panel of TD-8816. Connect the other end to the MODEM port of the external splitter. Step 2: Connect the Ethernet cable. Attach one end of a[...]

TD-8816 ADSL2+ Modem Router User Guide 7 Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-881 6 or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC’s IP address. Follow the steps below to configure it. Step 1: Click the Start menu on your desktop[...]

TD-8816 ADSL2+ Modem Router User Guide 8 Figure 3-3 Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK . Figure 3-4[...]

TD-8816 ADSL2+ Modem Router User Guide 9 ) Note: You can c onfigure the PC to get an IP address aut omatically, select “Obtain an IP address automatically” and “Obtain DNS server addre ss automatically” in the screen above. Now, you can run the Ping command in the comm and prompt to verify the network connection. Please click the Start menu[...]

TD-8816 ADSL2+ Modem Router User Guide 10 After that, you will see the screen shown below, enter the default User Name admin and the default Password admin , and then click OK to access to the Quick Start screen. You can follow the steps below to comp lete the Quick Setup. Figure 3-7 Step 1: Select the Quick Start tab, then click RUN WIZARD , and y[...]

TD-8816 ADSL2+ Modem Router User Guide 11 Step 3: Select the connection type to connect to the ISP (We select PPPoE/PPPoA mode for example here), and then click the NEXT button. Figure 3-10 Step 4: Configure the following opti ons provided by your ISP: Username , Password , VPI , VCI and Connection Type . Then click NEXT . Figure 3-1 1 Step 5: Clic[...]

TD-8816 ADSL2+ Modem Router User Guide 12 Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more abo ut this device and make use of its functions adequately, maybe you will get help from this chapter to configur e the advanced se[...]

TD-8816 ADSL2+ Modem Router User Guide 13 Figure 4-2 4.1.2 System Log Choose “ Status → System Log ” menu, and you will be able to quer y the logs of the Router.[...]

TD-8816 ADSL2+ Modem Router User Guide 14 Figure 4-3 The Router can keep logs of all traffic. Yo u can query the logs to find what happened to the Router. Click the CLEAR LOG button to clear the logs. Click the SAVE LOG button to save the logs. 4.1.3 Statistics Choose “ Status → Statistics ” menu, and you will be able to view the network traf[...]

TD-8816 ADSL2+ Modem Router User Guide 15 ¾ Select Ethernet , and you will see the statistics table as below. Statistics Table: Transmit Frames The frames transmitted over the Ethernet port. Transmit Multicast Frames The multicast frames transmitted over the Ethernet port. Transmit total Bytes The total bytes transmitted over the Ethernet port. Tr[...]

TD-8816 ADSL2+ Modem Router User Guide 16 4.2 Quick S t art Please refer to " 3.2: Login" . 4.3 Interface Setup Choose “ Interface Setup ”, you can see the next submenus: Internet and LAN . Figure 4-5 Click any of them, and you will be able to configure the corre sponding function. 4.3.1 Internet Choose “ Interface Setup → Interne[...]

TD-8816 ADSL2+ Modem Router User Guide 17 Figure 4-6 ¾ ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) settings to you. In th is Device, you can totally setup 8 VCs on different encapsulations, if you apply 8 di fferent virtual circuits from your ISP. You need [...]

TD-8816 ADSL2+ Modem Router User Guide 18 32 to 65535 (1 to 31 is reserved for well- known protocols). Pl ease input the value provided by your ISP. • PVCs Summary: Click the button, you can view the summa ry information about the PVCs. • QoS: Select the Quality of Service types for th is Virtual Circuit, in cluding CBR (Constant Bit Rate), UBR[...]

TD-8816 ADSL2+ Modem Router User Guide 19 • Direction: Select this option to s pecify the RIP direction. None is for disabling the RIP function. Both means the ADSL Router will periodi cally send routing information and accept routing informati on, and then incorporate them into routing table. IN only means the ADSL router will only acc ept but w[...]

TD-8816 ADSL2+ Modem Router User Guide 20 Figure 4-9 ¾ Service name: Specify a name for the PPPoA/PPPoE connection for recognition. ¾ Username: Enter your username for your PPPoA/ PPPoE connection to identify and verify your account to the ISP. ¾ Password: Enter your password for your PPPoA/PPPoE connection. ¾ Encapsulation: For both PPPoA/PPPo[...]

TD-8816 ADSL2+ Modem Router User Guide 21 given IP address provided by your ISP. For St atic IP, you nee d to s pecify the IP address, Subnet Mask and Gateway IP address. ¾ Default Route: You should select Yes to configure the PVC as the default gateway to internet from this device. ¾ MAC Spoofing: MAC Spoofing feature allows you to change the as[...]

TD-8816 ADSL2+ Modem Router User Guide 22 Figure 4-1 1 ¾ Router Local IP: These are the IP settings of the LA N interface for the device. These settings may be referred to as Private se ttings. You may change the LAN IP addres s if needed. The LAN IP address is private to y our internal networ k and cannot be seen on the Internet. • IP Address: [...]

TD-8816 ADSL2+ Modem Router User Guide 23 The Router will work as a DHCP Server, it becomes the default gatew ay for DHCP client connected to it. DHCP stands for Dynamic Host Control Protoc ol. The DHCP Server gives out IP addresses when a device is booting up and request an IP address to be logged on t o the network. That device must be set as a D[...]

TD-8816 ADSL2+ Modem Router User Guide 24 ¾ DHCP Relay: Select Relay , then you will see the next screen (shown in Figure 4-13 ), the Router will work as a DHCP Relay. A DHCP re lay is a computer that forwards DHCP data between computers that request IP addresse s and the DHCP server that assigns the addresses. Each of the device's in terface[...]

TD-8816 ADSL2+ Modem Router User Guide 4.4 Advanced Setup Choose “ Advanced Setup ”, you can see the next submenus: Figure 4-14 Click any of them, and you will be able to configure the corre sponding function. 4.4.1 Firewall Choose “ Advanced Setup → Firew all ” menu, and you will see the next screen (shown in Figure 4-15 ). Figure 4-15 ?[...]

TD-8816 ADSL2+ Modem Router User Guide 26 Click ADD ROUTE button to add a new route in the next screen (shown in Figure 4-17 ). Figure 4-17 ¾ Destination IP Address: This parameter specifies the IP network address of the final destination. ¾ IP Subnet Mask: Enter the subnet mask for this destination. ¾ Gateway IP Address: Enter the IP address of[...]

TD-8816 ADSL2+ Modem Router User Guide 27 ¾ Virtual Circuit: Enter Virtual Circuit Index that you plan to setup for the NAT function. ¾ NAT Status: This field shows the current statu s of the NAT function for the current VC. You can go to the previous screen (shown in Figure 4-6 ) to activate the function. ¾ Number of IPs; This field is to speci[...]

TD-8816 ADSL2+ Modem Router User Guide 28 Figure 4-20 ¾ Rule Index: The Virtual server rule index for this VC. You can specify 10 rules in maximum. All the VCs with single IP will use the same Virtual Server rules. ¾ Start & End port number: Enter the specific Start and End Po rt number you want to forward. If it is one port only, you can ent[...]

TD-8816 ADSL2+ Modem Router User Guide 29 Figure 4-21 Figure 4-22 ¾ Rule Index: Select the Virtual server rule index fo r this VC. You can specify 10 rules in maximum. All the VCs with single IP w ill use the same Virtual Server rules. ¾ Rule Typ: There are four types of one-to-one, Many-to-One, Many-to-Many Overload and Many-to-Many No-overload.[...]

TD-8816 ADSL2+ Modem Router User Guide 30 Step 3: Select the rule type you want from the drop-down list. Step 4: Enter the local and public IP addresses in the corresponding fields. Step 5: After that, click SAVE to make the entry take effect. Other configurations for the entries as shown in Figure 4-22 : Enter the index of assigned entry, click th[...]

TD-8816 ADSL2+ Modem Router User Guide 31 ¾ QoS: Select this option to Activated/Deactivat ed the IP QoS on different types (IP ToS and DiffServ). ¾ Summary: Click the button to view t he configurations of QoS. ¾ Rule: Configure the rules for QoS. If the traffic complies with the rule, then the Router will take the corresponding action to deal w[...]

TD-8816 ADSL2+ Modem Router User Guide 32 Virtual LAN (VLAN) is a group of devic es on one or more LANs that are conf igured so that they can communicate as if they were attached to t he same wire, when in fact they ar e located on a number of different LAN segm ents. Because VLANs are based on lo gical instead of physical connections, it is very f[...]

TD-8816 ADSL2+ Modem Router User Guide 33 Click Define VLAN Group in Figure 4-24 , you can define VLAN groups in the next screen (shown in Figure 4-26 ). Figure 4-26 ¾ VLAN Index: Select the VLAN index for this VC. You can specify 8 gr oups in maximum. ¾ VLAN ID: This indicates the VLAN group. ¾ ATM VCs: Select the ATM VCs as members of VLAN , a[...]

TD-8816 ADSL2+ Modem Router User Guide 34 Figure 4-27 ¾ ADSL Mode: Select the ADSL operation mode wh ich your ADSL connection uses. ¾ ADSL Type: Select the ADSL operation type wh ich your ADSL connection uses. 4.5 Access Management Choose “ Access Management ”, you can see t he next submenus: Figure 4-28 Click any of them, and you will be abl[...]

TD-8816 ADSL2+ Modem Router User Guide 35 ¾ ACL: If Activated , the IP addresses which are contained in the Access Control List can access to the Router. If Deactivated , all IP addresses can access to the Router. ¾ ACL Rule Index: Select the ACL rule index for the entry. ¾ Active: Enable the ACL rule. ¾ Secure IP Address: Select the IP address[...]

TD-8816 ADSL2+ Modem Router User Guide 36 Figure 4-30 ¾ Filter Type Selection: Select the fil t er type fo r the next configuration. ¾ IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match with six IP / MAC Filter Rule Indexes. ¾ Interface: Select the interface for the entry. ¾ Direction: Select the directi[...]

TD-8816 ADSL2+ Modem Router User Guide 37 be shown in the row 2 for the matching with 1. ¾ Rule Type: For IP Filter, please select IP here. ¾ Active: Select “Yes” to make t he rule to take effect. ¾ Source IP Address: Enter the source IP address for the ru le. You can enter 0.0.0.0; it means that all IP addresses are controlled by the rule. [...]

TD-8816 ADSL2+ Modem Router User Guide 38 Step 4: Select the Protocol as “TCP” and se lect the Unmatched rule as “Next”. Step 5: Finally, click the SAVE to save the entry. Step 6: Go to Step 2 to configure the next two rule s: Block E-mail received by the IP address 192.168.1.7 on your local network; Make t he PC with IP address 192.168.1.8[...]

TD-8816 ADSL2+ Modem Router User Guide 39 Figure 4-31 ¾ Rule Type: Select MAC for the MAC Filter rule. ¾ Active: Select “Yes” to make t he rule to take effect. ¾ MAC Address: Enter the MAC address for the rule. ¾ Rule Unmatched: If the current rule can not match, and you select Forward , the router will skip the rule and transmit directly. [...]

TD-8816 ADSL2+ Modem Router User Guide 40 ) Note: If you want to make the rule take ef fect, please select Ye s to activ e the rule. Step 3: Enter the “MAC Address” and select the Unmatched rule as “Next”. Step 4: Finally, click the SAVE to save the entry. Step 5: Go to Step 2 to configure the next rule: Block the PC with MAC address 00-0A-[...]

TD-8816 ADSL2+ Modem Router User Guide 41 Figure 4-32 ¾ Filter Type Selection: Select the Application Filter for the next configuration. ¾ Application Filter: Activate or deactivate the function. ¾ ICQ & MSN & YMSG & Real Audio/Video: Select Allow or Den y for these applications. If you select Allow, the Router will accept the applic[...]

TD-8816 ADSL2+ Modem Router User Guide 42 ¾ Filter Type Selection: Select the URL Filter fo r the next configuration. ¾ Active: Select “Yes” to make t he rule to take effect. ¾ URL Index: Select the index for the URL Filter entry. ¾ URL: Enter the URL for this URL Filter. ¾ URL Filter Listing: This displays the informati on about the URL F[...]

TD-8816 ADSL2+ Modem Router User Guide 43 simple peer-to-peer network connec tivity between devices. An UPnP device can dynamically joi n a network, obtain an IP address, convey its c apabilities and learn about other devices on the network. In turn, a device can l eave a network smoothly and automatically when it is no longer in use. UPnP broadcas[...]

TD-8816 ADSL2+ Modem Router User Guide 44 ¾ My Host Name: Enter your host name here. ¾ E-mail Address: Enter your E-mail address here. ¾ Username & Password: Type the “User Name” and “Password” for your D DNS account. ¾ Wildcard support: Select the option to use Wildcard function 4.5.6 CWMP Choose “ Access Management → CWMP ”,[...]

TD-8816 ADSL2+ Modem Router User Guide 45 Figure 4-38 Click any of them, and you will be able to configure the corre sponding function. 4.6.1 Administration Choose “ Maintenance → Administration ”, you can set new password for admin in the screen (shown in Figure 4-39 ). Figure 4-39 ) Note: 1) There is only one account that can access Web-Man[...]

TD-8816 ADSL2+ Modem Router User Guide 46 Figure 4-40 ) Note: The ADSL Router built-in some NTP Servers, when the Router connects to the In ternet, the Router will get the system time automatically from the NTP Serv er . Y ou can also configure the NTP Server address automatically , and then the Router will get the ti me from the specific Server fi[...]

TD-8816 ADSL2+ Modem Router User Guide 47 Figure 4-42 4.6.3 Firmware Choose “ Maintenance → Firmware ”, you can upgrade the firmware of the Router in the screen (shown in Figure 4-43 ). Make sure the firmware or romfile yo u want to use is on the local hard drive of the computer. Click Browse to find the local hard drive and locate the firmwa[...]

TD-8816 ADSL2+ Modem Router User Guide 48 2) When you upgrade the router's firmw are, yo u may lose its current configurations, so please back up the router’s current setti ngs before you upgrade its firmware. 3) Do not turn off the router or press the Reset button while the firmware is being upgrad ed. 4) The router will reboot afte r the u[...]

TD-8816 ADSL2+ Modem Router User Guide 49 Step 2: Click the UPGRADE button to complete. 4.6.4 SysRestart Choose “ Maintenance → SysRe start ”, you can select to restart the device with current settings or restore to factory default settings in the screen (shown in Figure 4-46 ). Figure 4-46 4.6.5 Diagnostics Choose “ Maintenance → Diagnos[...]

TD-8816 ADSL2+ Modem Router User Guide 50 4.7 Help Choose “ Help ”, you can view the help information for configuration of any function. Figure 4-48 ) Note: Click the tab, and you will be able to get the corresponding information.[...]

TD-8816 ADSL2+ Modem Router User Guide 51 Appendix A: Specifications General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G. 992.2, ITU G.992.3, ITU G.992.5 IEEE 802.3, IEEE 802.3u, TCP/IP, PPPoA , PPPoE, SNTP, HTTP, DHCP, ICMP, NAT,CWMP Safety & Emission FCC, CE Ports 1 10/100M Auto-Negotiation RJ45 port （ Auto MDI/MDIX) 1 RJ11 port[...]

TD-8816 ADSL2+ Modem Router User Guide 52 Appendix B: Troubleshooting 1. How do I restore my Rout er’s configuration to its factor y default settings? With the Router powered on, press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it. ) Note: Once the Router is reset, the current confi guration settings will be [...]

TD-8816 ADSL2+ Modem Router User Guide 53 Click Network Connections Right-click Local Area Connection Click Properties[...]

TD-8816 ADSL2+ Modem Router User Guide 54 Double-click Internet Protocol (TCP/IP) Select Obtain DNS server address automatically Select Obtain an IP address automatically Click OK[...]

TD-8816 ADSL2+ Modem Router User Guide 55 Click OK[...]

TD-8816 ADSL2+ Modem Router User Guide 56 For Windows Vista OS Go to Start > Settings > Control Panel , and then you will see the following page. Click View network status and tasks Click View status Click Properties[...]

TD-8816 ADSL2+ Modem Router User Guide 57 Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK[...]

TD-8816 ADSL2+ Modem Router User Guide 58 For Windows 7 OS Go to Start > Settings > Control Panel , and then you will see the following page. Click Change adapter settings Click Properties Right-click Local Area Connection Click View network status and tasks[...]

TD-8816 ADSL2+ Modem Router User Guide 59 Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK[...]

TD-8816 ADSL2+ Modem Router User Guide 60 2) Configure your IE browser Open your IE browser, click Tools tab and you will see the following screen. Click Internet Options Click OK Select Never dial a connection Now, try to log on to the Web-based configur ation page again after the above settings have been configured. If you still cannot a ccess th[...]

TD-8816 ADSL2+ Modem Router User Guide 61 try the following steps. If you cannot, please set your computer referring to T3 then try t o see if you can access the Internet. If the pr oblem persists, please go to the next step. 3) Consult your ISP and make sure all the VPI/VCI, C onnection Type, account username and password are correct. If there are[...]

TD-8816 ADSL2+ Modem Router User Guide 62 Appendix C: Technical Support Technical Support  For more troubleshooting help, go to: www.tp-link .com/support/faq.asp  T o download the latest Firmware, Driver , Utility and User Guide, go to: www.tp-link .com/support/dow nload.asp  For all other technical support, please c ontact us b y using th[...]