TP-Link TL-SC3430N manuale d’uso

TL-SC3430N Wireless N H.264 Megapixel Surveillance Camera Rev: 1.0.0 1910010550[...]

COPYRIGHT & TRADEMARKS S pecifications ar e subject to change without notice. is a registe red trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders. No part of the specificatio ns ma y be reproduced in any form or by any means or used to make any derivat[...]

FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if n[...]

i CONTENTS Package Content s .............................................................................................................. 1 Chapter 1 Safety Instructions .......................................................................................... 2 Chapter 2 Minimum System Require ment & Product Feature .........................[...]

ii Europe – EU Declaration of Conformity ......................................................................... 89 Federal Communication Commi ssion Interference St atement .................................... 92[...]

1 Package Content s The following items should be found in your package: ¾ TL-SC3430N Wireless N H.264 Megapixel Surveillance Camera ¾ Power Adapter ¾ Mounting Bracket with three screws, a Lock Ring, a Brace and a Base Plate ¾ RJ45 Cable ¾ Quick Installation Guide ¾ Resource CD, including: z This User Guide z Application Guide z Other helpful[...]

2 Chapter 1 Safety Instructions ¾ Before you use this product This product has been designed with safety in mind. Ho wever, the electrical products can cause fires which may lead to serious body injur y if not used pr operly. To avoid such accidents, be sure to heed the following. ¾ Legal Caution Video and audio surveillance can be forbid den by [...]

3 Chapter 2 Minimum System Requirement & Product Feature 2.1 System Requirement For normal operation and viewing of the network ca mera, it’s recommended that your system meets these minimum requirements for proper operation: Item Requirement s CPU Pentium 4 2.8GHz (or equivalent AMD) Graphic Card 256 MB RAM graphic cards(or equivalent on-boa[...]

4 Audio compression: G.711 μ law, a law, and AMR Mobile Phone Live View Through 2.5 WAP, 3GPP, 3G Streaming, and 3G Browser Alarm Sending FTP Client / SMTP / Network Stor age / Memory Card / HTTP event Security Passward Protecton / HTTPS encryption / IP Filter Alarm Buffer Recording image and audio file pre-and-post disconnection up to 5 sec. Supp[...]

5 Built-in Microphone : The location where the voice from your partner comes out. SD/SDHC Card Slot : Supports SD/SDHC memory card. 2.3.2 Bottom view ¾ Power Connector : The power connector is where you connect the power adapter . ¾ RESET : Please take the following step s to reset the camera to its defaults. Keep the camera powered on, then pres[...]

6 Step 1. Press the WPS button on the rout er supporting WPS for 2 seconds. Ste p 2 . Press the WPS button on the Camera within 2 minutes. ¾ Lock Ring : It is used to adjust the angle of the Camera. ¾ Base Plate : It is used to support the Camera and can be fixed to a flat surface with the supplied screws. 2.4 Mount the Camera 2.4.1 The Screw Siz[...]

7 (2) W all Mount 2.5 Hardware Connection Before proceeding, confirm that y our PC is connected to your router and can access the Internet. Make sure that your router ’s DHCP feature is enabled. If no t, please refer to your router ’s instruction to enable it. For TL-SC3430N, if your router supports WPS (Wi-Fi Protected Setup), you can also use[...]

8 2.5.2 Method 2: WPS Connection Power on the Camera and make sure that the Po wer LED is blue before WPS Connection. Then take the following steps. A. Press the WPS button on the router supporting WPS for 2 seconds. B. Press the WPS button on t he Camera within 2 minutes. After you press the WPS button on the Camera, the Power LED will turn purple[...]

9 Chapter 3 Using IP Camera via Web Browser 3.1 Obt ain the IP Address 1. Insert the provided CD into your CD-ROM driver . The Setup Wizard will automatically pop up on your computer ’s screen as shown in the figure below . Figure 3-1 2. Choose the Intelligent IP Inst aller , and then the next screen appears. Click on Intelligent IP Inst aller to[...]

10 3. After the inst allation is finished, click St art > All Programs > TP-LINK >Intelligent IP Inst aller to start using the program. Figure 3-3 4. The following screen will then display . Click the Search button to search Netw ork Cameras in the network; it displays Network Camera s information including IP Address. Figure 3-4[...]

11 3.2 Windows W eb Browser .2 Windows W eb Browser The configuration of browser is si milar in Windows XP/Vist a/7. Here we take IE browser in Windows XP for example. The configuration of browser is si milar in Windows XP/Vist a/7. Here we take IE browser in Windows XP for example. 1 Click Link to IE button in Figure 3-4 directly . Y ou can also l[...]

12 3.3 Mac Web Browser .3 Mac Web Browser 1 Click the Safari icon. 1 Click the Safari icon. 2 After the home p age appears, click Bookmarks and then choose Show All Bookmarks .[...]

13 3 Click Bonjour on the left of the following screen. Double c lick the Mac address of the Camera in the bookmark list. For example, TP-LINK-001BFE0334A2 . 4 Enter the default Name admin and default Password admin . Cli ck Log In . ) Note: The default user name “admin” and the password “admin”a re set at the factory for the adm inistrator[...]

14 5 The monitor image will be displayed in your browser . In the far left side of main configuration are Setting, Client Setting and Image Setup .[...]

15 Chapter 4 Operating IP Camera via Mobile Phone 4.1 Mobile Phone V iewing 4.1.1 3G Mobile Phone S treaming Viewing For 3G mobile phone viewing, type “ rtsp://<IP>:<PORT>/video.3gp ” into y our 3G S treaming Link. <IP> is the Public IP address of your IP Camera; <POR T> is the RTSP port of your IP Camera (Default value [...]

16 4. The TP-LINK User Interface an d live image will show up in the midd le of the screen. 3. Enter name and password. Default values are both admin. Then click Lo g in ) Note: It will show c ontinuous snapshot s not a real time video st reaming. Therefore, the recording feature is disabled.[...]

17 Chapter 5 Configuration of Main Menu In the left side of main configuration are Setting, Client setting and Image setting . In the right side, you c an control Live View in your main Browser . The functions include: Snap shot, Open digit al zoom, Audio, and Vi d eo Pl a y . V ideo Play Audio Play Open digit al zoom 5.1 Live V iew 5.1.1 Snap shot[...]

18 5.1.2 Digit al zoom in / out the image via the monitor window • Click to display the digital zoom in window . • Pull the to adjust the digital zoom ra nge, and it will be showed on the above windo w . • Use the left click of your mouse to move to anywhere in the window area. 5.1.3 V ideo play buttons Symbols Meaning Pause the current video[...]

19 Click Basic folder , there are sub-folders including System, Camera, Network, and Security . Fore more information, you can see Chapter 6 . Click Advanced folder , there are sub-folders including FTP Client , SMTP , Network Storage , Memory Card , HTTP event , Schedule , Alarm buffer , Motion detection , Audio detection , and System Log . Fore m[...]

20 5.3.4 V ideo Buffer .3.4 V ideo Buffer T urn the Video Buffer function On / Off . The Video Buffer function makes th e streaming more smooth in unsteady network environment, but might cause a little delay in live viewing. T urn the Video Buffer function On / Off . The Video Buffer function makes th e streaming more smooth in unsteady network env[...]

21 Chapter 6 Setting-Basic Click the Basic folder to display the sub folders including System , Camera , Netw ork , and Security . 6.1 System Click the folder of System to display the sub-folders including Information, Date / Time, Initialize, and Language. 6.1.1 Information The Information screen provides the produc t factory information which inc[...]

22 6.1.2 Date / T ime The Date/ T ime screen displays all options of time setting. ¾ Current Date / Time: This displays th e current date and time of this IP Camera. ¾ PC Clock: This displays the date and time of the monitoring PC clock. ¾ Date / Time Format: Y ou can click the pull down box to sele ct different time display format s. ) Note: If[...]

23 time display will be the same as the current date / time option. ¾ Daylight Saving Ti me: There ar e two modes to choose for setting up daylight saving time. z By Date: Set the start and end time by select month, day , hour , and minute. z By Week Number: Set the st art and end time by sele ct month, week, hour , and minute. ) Note: The NTP ser[...]

24 6.1.4 Language ¾ Upload Language Pack : Clicking “Browse” and selecting the file for updating, the present language display of WEB User Interface could be changed. A confirmation dialogue will appear . Click “OK”, then the update will be applied imm ediately . The default language is “English”. 6.2 Camera Click the folder of Camera [...]

25 6.2.1 General ¾ RTSP : The default value is 554. If the IP Camera s connected with router and installed out side are over 2 sets and all of them need support RTSP , please fill some value in the blank space in the range from 1024 to 65535. ¾ RTP Unicast streaming : The default value of port range is 5000 ~ 7 999 and can be changed from 1024 to[...]

26 ¾ T ext Overlay: Some information can be showed on the di splay screen, such as Date / T ime and user-defined text. And the ba ckground color can be chosen. ¾ Privacy Mask: A specific area of the video image can be covered. 6.2.2 S tream 1 ¾ Vie w er Authentication: z On : If the viewer authentication is On, the users will be requested to key[...]

27 20, 25, and 30 fp s. The unit “fp s” stands for “frames per second”. ) Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fp s at 640x480. Howe ver , if you woul d like choose frame rate over 15 fps, the IMAGE SIZE of H.264/MPEG-4/MJPEG setting p age has to been selected 320x240 or 640x480 at the same time. ¾ Quality: z Aut[...]

28 ¾ Vie w er Authentication: z On : If the viewer authentication is On , the users will be requested to key-in username and password when using QuickTime Play er to have live viewing. z Off: If the viewer authentication is Off , you can have live viewing on computer by QuickT ime Player after entering “rtsp://ip:port/video.mp4” on the URL col[...]

29 z Fixed Quality : Sel ect the value of quality among M edium, S tandard, Good, Detailed and Excellent. z Fixed Bitrate: Set the bitrate of MPEG-4 image trans mission for a line. Y ou can select one value among 64Kbps, 128Kbps, 256Kbps, 384Kbp s, 512Kbps, 768Kbps, 1Mbps, 1.5 Mbp s, 2 Mbps, 3 Mbp s, 4 Mbps, 5 Mbps, and 6 Mbps. ) Note: Concerning h[...]

30 z Video / Audio Port: S pecify the transmission port number of the video data, from 1 124 to 65534. z Time-T o-Live: Set the maximum TTL that mult icast can pass through. ) Note: T ime-T o-Live option determines t he maximum length of time (meas ure as the number of network routers that can be passed before data arrives at its destination or is [...]

31 z On : If the viewer authentication is On , the users will be requested to key-in username and password when using QuickTime Play er to have live viewing. z Off: If the viewer authentication is Off , you can have live viewing on computer by QuickT ime Player after entering “rtsp://ip:port/video.3gp” on the URL column directly . ¾ Image Size[...]

32 z Auto : Choose Auto and you have 3 options to adjust the exposure condition. 9 Back Light Compensate: Click it on and it helps avoid problems in situations where the main subject ends up being too dark, such as when shooting people or other subjects in front of a bright background. 9 Slow Shutter : Click it on and the range of shutter speed wil[...]

33 6.3 Network Click the folder of Network to display the sub folders including Information , PPPoE , DDNS , UPnP , Bonjour , IP Notification , W ireless and WPS . Full Screen Mirror/ Flip Snap shot Open Digit al Zoom Vo l u m e Increase S p eed Mute on / Mute off Decrease Speed Pause Open Files Stop[...]

34 6.3.1 Information Display the MAC address of the device. ¾ Obt ain an IP address automatically (DHCP) : If a DHCP server is installed on the network, to select this while the IP addre ss is assigned by the DHCP server . ¾ Obt ain DNS server add ress automatically : Select this to obtain the address of DNS server automatically .[...]

35 ¾ Use the following IP address: Select this option when the fixed IP address is set. z IP address: Enter the IP address of the device. z Subnet mask: Enter the subnet mask. z Default gatew ay: Enter the default gateway . ¾ Use the following DNS server address : Select this when you set the fixed address as the IP address of DNS server . z Prim[...]

36 ¾ IP Address : The IP address obt ained at t he PPPoE connecting with network. ¾ User ID : Enter the user ID for authentication necessary for PPPoE connections. T ype it up to 64 characters. ¾ Password : Enter the password for authentication nec essary for PPPoE connections. T ype it up to 32 characters. ¾ Re-type Password : Re-type the pass[...]

37 Point-to-Point Protocol frames insider Ether net frames. PPPoE connection is used mainly with ADSL service where individual users connect to the ADSL transceiver (modem) over Ethernet work. It also widely used in XDSL (digital af filiate line such as ADSL, VDSL or SDSL) 2) The IP Camera needs to be rebooted af ter it fi nishes changing the netwo[...]

38 2. Input all information and fo llow step by step with DynDNS. 3. Login with new account and click Account → My Hosts → Add Host Services.[...]

39 4. Type domain in the Hostname field and select sub-domain. 5. After typing information, check your DDNS service[...]

40 6. Type your DDNS User ID, Password and Host name in Setting → Netw ork → DDNS . After completing setting, reboot IP Camera. 6.3.4 UPnP (Universal Plug and Play) If you have a Router to access to internet and the Router supp orts UPnP IGD function, you need to turn on the UPnP Port Forwarding function.[...]

41 ¾ HTTP Port : Enter the HTTP port number and default HTTP port is 80. ¾ SSL Port: Enter the SSL port number and default SSL port is 443. ¾ RTSP Port: Enter the RTSP port, defa ult value is 554 for computer view . ) Note: UPnP (Universal Plug and Play ): UPnP is a set of computer network protocol. It allows devices to connect seamlessly and si[...]

42 ¾ Device Name : Enter Device Name you wish. ) Note: How to use Bonjour in your Windows Browser UI? Please check the link below: http://www .apple.com/support/downloads/bonjourforwindows.html 6.3.6 IP Notification Once IP Notification is set to " On ", the Camera will automatically s end an e-mail notification to tell users its updated[...]

43 z SMTP: Select if SMTP authentication is necessary for sending e-mail. z POP before SMTP : Select if POP before SMTP authenticat ion is necessary for sending e-mail. 9 POP server name : It is necessary when the POP before SMTP is selected in Authentication . T ype the POP (receiving mail) server name up to 64 characters, or type the IP address o[...]

44 ¾ St atus of Wireless Networks The list above is the result of netwo rk scan. The network cu rrently linked to will be shown in blue. The following information is provided. z ESSID - The name of a wireless network (or ad-hoc device). If the same name occurs several times this means that several access points for that network were found. The Cam[...]

45 z ESSID (ESSID is sometimes written as SSID) - This is the name of the wireless network to which the Camera is ready to connect. The fiel d accepts up to 32 alphanum eric characters. The name must be exactly the same as that used in the wireless access point; otherwise, the connection will not be established. Leaving this field blank means the C[...]

46 9 Obt ain an IP address automatically (DHCP) – If a DHCP server is installed and enabled on the network, to select this for the IP address can be assigned by the DHCP server . 9 Use the following IP address - Select this when the fixed IP address is set.  IP address : Enter the IP address of the Camera , which must be in the sa me subnet wi[...]

47 2. Se condly, open the router ’s Web-based Ut ility and click QSS link on the left of the main menu. Then the following screen will appear. Click Add device . And then select Enter the new device’s PIN and enter the PIN value of the Camera, click Connect .[...]

48 6.4 Security Click the folder of Security to display the sub folders including Account , HTTPS , and IP Filter . 6.4.1 Account The device fault account and password setting is “adm in / admin”. That means everyone who knows IP address can access the device includ ing all configuration. It is nece ssary to assign a password if the device is i[...]

49 z The Viewer mode only can view the Live View . ¾ Vie w er Authentication : Select whether the authentication is needed when users access to live view . z On: Authentication is required to let different users have dif ferent levels o f permission to access the Camera view . z Off: Authentication is not required to access the Camera. Check Off a[...]

50 ) Note: When enable HTTPS with RTSP on mode, the IP Came ra only protect the setting such as username and password and do not protect video and audio. When enable HTTPS with RTSP off mode, the IP Camera will protect all setting in cluding video and audio. 6.4.3 IP Filter IP Filter provides the f unction of controlling the range of IP address, si[...]

51 Chapter 7 Setting-Advanced Click the folder of Advanced to display the sub folders including FTP client, SMTP , Netw ork storage, Memory Card, HTTP event, Schedule, Alarm buffer , Motion detection, Audio detection , and System Log . 7.1 FTP Client Use this menu to set up for capturi ng and sending an image or video clip to an FTP server . By usi[...]

52 7.1.1 General Select On when you use FTP function. The FTP client Setting screen appears. Select Off, when you do not wish to use the FTP client function. ) Note: The frame rate and operability on the main viewer may decrease while a file is being transmitted by the FTP client function. ¾ Att ached file T ype : Y ou can choose snaps hot or vide[...]

53 the external sensor input or by the built-in motion detection function. Select On to send the file to FTP server linked with the alarm detection. ¾ Remote Path : T ype the path to the destination in FTP server up to 64 characters. ¾ Image File Name : T ype the file name you want to assi gn to the files when sending to the FTP server . Y ou can[...]

54 → Audio Detection → Setting ”) z Network Link Down: Click it on to receive a snapshot or a video clip while network link down. If Att ached File T ype (go “Setting → Advanced → FTP Client → Gener al” ) was clicked as video clip, you can use Alarm Buffer function as a sensor . It’s for recording audio file in the IP CAM before a[...]

55 number is added to the file name. z Sequence number : A consecutive n umber is added to the Image file name. z Sequence number clear : Click Clear and the suffix of the sequence number returns to 1. ¾ Interval : Set the periodical sending is effective interval. Min value is 1 min and Max value is 24 hour . ¾ Effective Period : Set the period w[...]

56 Network → IP Notification ”) ¾ SMTP Server Name : T ype the SMTP server name up to 64 characters, or the IP address of the SMTP server . ¾ SMTP Server Port : Y ou can set port number from 1~65535 according to your mail server . The default value is 25. z Security setting : Tick SSL box if the mail server you use has security restriction. )[...]

57 This address is used for reply mail and sendi ng system messages from the SMTP server . ¾ Att ached File T ype : Y ou can choose snapshot or vide o clip for alarm sending. Select “Snapshot,” one snap shot will be transmitted to the administrator ’s e-mail address while motion detection / audio detection triggered. Select “Video Clip,”[...]

58 z Date & time : The date & time suffix is added to the Image file name. The date & time suffix consists of lower two-digits of year (2 digits), m onth (2 digits), date (2 digits), hour (2 digits), minute (2 digits) and second (2 digit s), and c onsecutive number (2 di gits), thus 14-digit number is added to the file name. z Sequence [...]

59 ¾ Image File Name : T ype the file name of the image sent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score). ¾ Suffix : Select a suf fix to be added to the file name sent by SMTP . z Date & time : The date & time suffix is added to the Image file name. The date & time suffix consists of lower two-digits of ye[...]

60 7.3.1 General Select On if you would like to use the network storage function. Then c hoose one protocol between Windows network (SMB/CIFS) and Unix network (NFS). ¾ Protocol- Unix Network (NFS): z Network storage location: T ype th e IP or name of specified computer and folder . For example, //IP/folder name or // my_nas:/folder name. ¾ Proto[...]

61 z Network Storage Location: T ype the IP or name of specif ied computer and folder . For example, IPfolder name or my_nas:folder name. z Workgroup : T ype the name of workgroup which the operating computer belongs. z User Name : T ype the name of workgroup. ( If none, please leave it blank.) z Password : T ype the password for workgroup. ([...]

62 ¾ Alarm Sending : Select On to set to send files with connection to the alarm detection to network storage. ¾ Image File Name : T ype the file name you want to assign to the file to attach a mail. Y ou can use up to 10 alphanumeric, - (hyphen) and _ (und erscore) for naming. ¾ Suffix : Select a suf fix to add to the file name z Date & tim[...]

63 ) Note: Y ou can set alarm buffer at alarm buffer screen. (Please go “ Setting → Advanced → Alarm Buffer → Setting ”) ¾ Effective Period : Set the period when the periodical sending is effective. z Always : The periodical sending is always effective. z Schedule : Y ou can specify the period when the per iodical sending is effective in[...]

64 ¾ Recording Time: Set the period when the periodical recording is effective. z Always : The periodical recording is always effective. z Schedule : Y ou can specify the period when the peri odical recording is effective in the Schedule setting in the other section. ) Note: Y ou can set schedule function at schedule screen. (Please go “ Setting[...]

65 ¾ Format : Click Execute to clear up the data in memory card. ¾ Card St atus : The free sp ace and capacity of memory card. ¾ Card st aus notification : Select On to enable card status notification. z SMTP server name : T ype the SMTP server name using up to 64 characters, or the IP address of the SMTP server . z SMTP server port : Y ou can s[...]

66 9 On : If authentication is necessary for sending e-mail, select one of the authentication methods from the followings. SMTP : Select if SMTP authentication is necessary for sending e-mail. POP Before SMTP : Select when POP before SMTP aut hentication is necessary for sending e-mail. z Recipient E-mail Address : T ype the recipient e-Mail addres[...]

67 ¾ Alarm Sending : Select On to set to send files with connection to the alarm detection to memory card. ¾ Image File Name : T ype the file name you want to assign to the file to attach a mail. Y ou can use up to 10 alphanumeric, - (hyphen) and _ (und erscore) for naming. ¾ Suffix : Select a suf fix to add to the file name z Date & time : [...]

68 ¾ Image File Name : T ype the file name of the image sent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score). ¾ Suffix : Select a suf fix to be added to the file name sent by SMTP . z Date & time : The date & time suffix is added to the Image file name. The date & time suffix consists of lower two-digits of ye[...]

69 ¾ FTP server shut down : Backup files to memory card when FTP server is shut down. ¾ Network storage shut dow n : Backup images to memory card when network storag e is shut down. 7.5 HTTP event Use this menu to set up for capturing and sending im ages to an HTTP server . By using HTTP client function, you can send t he image file and audio fil[...]

70 7.5.1 General Select On when you use the HTTP function. The common setting options are displayed below . Select Off, if you do not wish to use the HTTP function. ¾ HTTP event : Set up the H TTP server URL, port, User ID, Password and Proxy Serv er settings. For example: URL: 192.168.1.107/cgi-bi n/oper ator/ptzset. ) Note: 1. The setting of URL[...]

71 7.5.2 Alarm sending Set to send the mail with connection to the alarm detection by the built-in motion detection function. Select On to send the image and audio file to HTTP server linked with the alarm detection. Alarm sending : Select On to set to send mail with c onnection to the alarm detection. ¾ Alarm z Motion Detection : Click it for usi[...]

72 ) Note: Y ou can set motion detection on motion detection page . (Please go to “ Setting → Advanced → Motion detection → Setting ”) Motion Detection works only when the MPEG4 function is On.[...]

73 z Parameter : the parameter of CGI (defined in Setting → Advanced → HTTP event → General → URL ) is from your target device. For example, move=down. z Message : message will show up in the form of Mess age = PTZ down. If your target device didn’t support the parameter of message, you can’t se e the message. So you can just take the m[...]

74 z Parameter : the parameter of CGI (defined in Setting → Advanced → HTTP event → General → URL ) is from your target device. For example, move=down. z Message : message will show up in the form of Mess age = PTZ down. If your target device didn’t support the parameter of message, you can’t se e the message. So you can just take the m[...]

75 menu as the setting menu which is displayed when you click Schedule to set Ef fective period and Schedule in FTP client, e-Mail ( SMTP ), Record, and Alarm out setting menu setting menu. ¾ Schedule Selection : Select the list box to specif y the schedule you want to set. z FTP -Alarm / FT P – Periodical / E-mail (SMTP) -Alarm / E- mail (SMTP)[...]

76 Use alarm buffer function for recording audio and vi deo file in the IP Camera before and after disconnected network. Afte r re-connecting, these files will transmit to FTP client, SMTP, and Network storage. You can set the pre-alarm and post-alarm period up to 5 seconds in Alarm Buffer function screen. 7.8 Motion Detection There are three Motio[...]

77 Click it on for using Audio Detection function as a sensor . Y ou can se t audio detection function at the audio detection func tion screen. ¾ Threshold : It means the extent which the alarm will be triggered. The default value is 50 and the value range is 0~100. The larger t he value, the higher the threshold. ¾ Sensitivity : It means that ho[...]

78 ¾ Enable Remote Log : Enables user to send the log dat a to a specified log server .[...]

79 Appendix A. Frame-rate and Bitrate T able – Help to set IP Camera with your network environment to access Internet. Base on your network upload e nvironment to choose the suitable Image-Quality setting. For example, if the network environment is ADSL 256Kb (upload) / 2Mb (download), the most fluent Image-Quality needs to set up under 256Kb sit[...]

80 320*240 6144 10 3600 10 320*240 2048 15 2200 15 320*240 2048 10 2200 10 320*240 512 15 550 15 320*240 512 10 550 10 A.1.4. MPEG 4@ 15fp s / kbps Quality 1280*1024 1280*720 640*480 320*240 Excellent 2700 2000 300 100 Detailed 1 100 800 200 80 Good 500 350 150 60 S tandard 350 250 100 40 Medium 300 200 80 35 A.1.5. MPEG4@ 10fps / kbps Quality 1280[...]

81 A.1.7. MJPEG @ 15fp s / kbps Quality 1280*1024 1280*720 640*480 320*240 Excellent 22000 16000 6000 2200 Detailed 12000 7000 3000 1200 Good 7000 5000 2500 1000 S tandard 5500 4000 2000 800 Medium 4000 3000 1200 500 A.1.8. MJPEG@ 10fps / kbps Quality 1280*1024 1280*720 640*480 320*240 Excellent 15000 1 10 00 4000 1500 Detailed 8000 5000 2000 800 G[...]

82 A.2 VGA Mode A.2.1 H.264 @ 30fp s / kbps Quality 640*480 320*240 Excellent 600 60 Detailed 120 40 Good 60 30 S tandard 50 25 Medium 40 20 A.2.2 H.264@15 fp s / kbps Quality 640*480 320*240 Excellent 400 40 Detailed 80 30 Good 40 25 S tandard 30 20 Medium 25 15 A.2.3 H.264 / kbps, f ps Image-Size Bitrate Setting Frame-Rate Setting Curr ent Bitrat[...]

83 A.2.6 MPEG4 / kbps, f ps Image-Size Bitrate Setting Frame-Rate Setting Curr ent Bitrate Current Frame-Rate 640*480 6144 30 6300 30 640*480 6144 15 6300 15 640*480 2048 30 2200 30 640*480 2048 15 2200 15 640*480 512 30 550 30 640*480 512 15 550 15 320*240 6144 30 5100 30 320*240 6144 15 2800 15 320*240 2048 30 2200 30 320*240 2048 15 2200 15 320*[...]

84 B. S tora ge Requirement T able - Help to set Recording S torage System. Please refer to the following table to find out the cap ability for recording into your hard dis k. B.1 Mega Mode B.1.1 H.264 S torage Requirement GB / channel / day @ 15fp s Quality 1280*1024 1280*720 640*480 320*240 Excellent 50 45 10 4.2 Detailed 16.6 13 8.3 2.5 Good 13 [...]

85 B.1.4 MPEG4 S torage Requirement GB / channel / day @ 15fp s Quality 1280*1024 1280*720 640*480 320*240 Excellent 133 83 25 8.3 Detailed 58.1 42 17 6.7 Good 42 25 12.5 5 S tandard 30 21 8.3 3.4 Medium 25 17 6.7 3 B.1.5 MPEG4 S torage Requirement GB / channel / day @ 10fp s Quality 1280*1024 1280*720 640*480 320*240 Excellent 92 58.1 17 6.7 Detai[...]

86 S tandard 4.2 2.1 Medium 3.4 1.7 B.2.2. H.264 S t orage Requirement GB / channel / day @ 15fp s Quality 640*480 320*240 Excellent 12.5 3.4 Detailed 6.7 2.5 Good 3.4 2.1 S tandard 2.5 1.7 Medium 2.1 1.3 B.2.3. H.264 S t orage Requir ement GB / channel / day Image-Size Bitrate Setting Frame-Rate Setting Curr ent Bitrate S torage Requirement 640*48[...]

87 640*480 2048 15 2200 182.6 640*480 512 30 550 45.7 640*480 512 15 550 45.7 320*240 6144 30 5100 423.3 320*240 6144 15 2800 232.4 320*240 2048 30 2200 182.6 320*240 2048 15 2200 182.6 320*240 512 30 550 45.7 320*240 512 15 550 45.7 C. System Requirement – Help to setup System C.1. 16 Channel IP Camera w ith CIF Performance Equipment Configurati[...]

88 Results from Test wi th a Resolution of 704×480 CCD IPCamera 704x480 Quality Frame Rate CPU Load Bandw idth 16 IP camera Excellent 30 95% 15~20 Mb ps Results from Test wi th a Resolution of 640×480 CMOS IPCamera 640x480 Quality Frame Rate CPU Load Bandw idth 16 IP camera Excellent 30 95% 10~15 Mb ps[...]

89 Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformi ty with the essential requirements of the R&TTE Directive 1999/5/EC: Clause Description EN 60950-1: 2001 Safety of Informati [...]

90 Español [S panish] Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cual esquiera otras dispos iciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟ ΥΣΑ [name of manuf acturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ?[...]

91 Svenska [Swedish] Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och övriga rele vanta bestämmelser som framgår av direktiv 1999/5/EG .[...]

92 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide re asonable protection against harmful interference in a residential installation. This equipment generates, us es and[...]