Tripp Lite 93-1911 manuale d’uso

Copyright © 2001 T ripp Lite. All rights reserved. 1111 W . 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www.tripplite.com Configuration & Connection: p. 5-10 Features: p. 10 - 11 W arranty: p. 12 T r oubleshooting: p. 13 Safety: p. 4 Intr oduction: p. 2 - 3 Maintenance & Service: p. 12 Specifications: p. 14 - 15 Owne[...]

2 Intr oduction Congratulations! Y ou’ve purchased the most adv anced, feature-rich integrated inv er ter/batter y charger on the market. Y our APS provides your equipment with utility-supplied A C power when it is av ailable, and during black outs, overvoltages and bro wnouts, y our APS automatically switches ov er to an external battery source [...]

3 Adv anced, 3-Stage Battery Charger Y our APS recharges your battery f aster than conv entional chargers because its three-stage charger pro- file (Bulk, Absor ption and Float) are optimized, regardless of the type of batter y y ou use (Wet or Gel).* In addi- tion, the advanced charging system protects against ov er-charge and ov er-discharge to e[...]

4 Safety This manual contains important instr uctions and warnings that should be f ollowed during the installation, operation and storage of all T r ipp Lite APS Systems. APS Location W arnings • Install your APS indoors , awa y from excess moisture or heat, dust or direct sunlight. • Y our APS is NO T waterproof. Contact with water can cause [...]

4 4 3 3 2 2 1 1 5 Configuration CONFIGURA TION DIP SWITCH SETTINGS DIP SWITCH GR OUP A (All models) BA TTER Y TYPE / VOL T AGE POINT Using a small tool, set the 4 “Battery T ype / V oltage P oint” Configuration DIP Switches , Group A (located on the front panel of your APS; see Diagram 1, p . 32) to select batter y type and set the voltage r an[...]

6 • Load Sharing (DIP Switches #1, Group B & #2, Group B) Y our APS features a high-output battery charger that can draw a significant amount of po wer from your line po wer source when charging at its maximum rate . If an APS is supplying its full AC po wer rating to its connected load at the same time as it is charging, it could trip its li[...]

7 • Limit Battery Charger (APS 1012 and APS 2012 only) (DIP Switch #4, Group B) T o prev ent overheating smaller batteries, the charger on these UPS systems is initially set to deliver only a fr action of its maximum power r ating to connected batteries. If y ou are using either of these APS systems with a larger battery or batter y system (ov er[...]

8 Mounting (Optional*) (See Diagram 2, p. 32). User must supply all f asteners and brack ets and verify their suitability for use with the intended mounting surface . T urn your APS P owerV er ter and connected equipment OFF bef ore mounting. • Install two 8 mm (1/4 in.) fasteners (A) into a rigid horizontal surf ace using the measurements in the[...]

9 vehicular battery connection. Choose the Basic Connection if y ou are running light hand tools or other small appliances for a brief period of time (see Diagram 7, p. 34) . Choose the Advanced Connection if you are using y our APS to power hea vy loads f or extended periods of time (see Diagram 8, p. 34) . The Advanced Connection incorporates a b[...]

10 Set Operating Mode Switch continued • Switch to “CHARGE ONL Y” when you are not using connected equipment. (W ARNING! APS will not provide batter y bac kup!) AD V ANT AGES: A) Continues to charge battery when power is present, and B) T ur ns OFF the APS’ s inv er ter , prev enting battery drain during black outs or brownouts. • Switch [...]

11 8. “B A TTER Y HI/MED/LO” (All models) These three lights will turn ON in sever al sequences to show the appro ximate charge level and voltage of y our connected batter y bank and aler t y ou to sev eral fault conditions: BA TTERY CHARGE INDICA TION (Approximate) Indicator Capacity Green 91% - Full Green & yello w 81% - 90% Y ellow 61% -[...]

12 Limited W arranty T ripp Lite warrants its products to be free from defects in materials and workmanship for a period of one year (domestic) or 12 0 days (e xpor t) from the date of initial purchase. T r ipp Lite’ s obligation under this warranty is limited to repairing or replacing (at its sole option) any such def ective products. T o obtain[...]

13 T ry these remedies for common APS problems bef ore calling for help . Call T ripp Lite Customer Ser vice at (773) 869-1234 before returning your APS f or ser vice. SYMPT OM PROBLEMS CORRECTIONS APS does not provide APS not properly connected to Connect APS to utility power . AC output (A C input present) utility power . Circuit breaker is tripp[...]

14 Specifications (Corded Models) CORDED MODELS: APS 1012 APS 1024 Weight: 26.4 lbs. 26.4 lbs. INVERTER Continuous power (@ 20° C): 900 W 1000 W Surge power (5 seconds): 1800 W 2000 W Efficiency (Full Load): 90% 90% Minimum DC Fuse Rating: 225A 125A DC Input Current @ Nominal V DC Full Load 95 A 47 A No Load 2.2 A* 1.3 A* Nominal Input V olts: 12 [...]

15 Specifications (Hard wired Models) HARDWIRED MODELS: APS 2012 APS2424 Weight: 38.0 lbs. 41.0 lbs. INVERTER Continuous power (@ 20° C): 2000 W 2400 W Surge power (5 seconds): 4000 W 4800 W Efficiency (Full Load): 90% 90% Minimum DC Fuse Rating: 500A 300A DC Input Current @ Nominal V DC Full Load 192 A 112 A No Load 2.5 A* 1.5 A* Nominal Input V [...]

32 2 Diagrams/Esquemas 3 1 See “Configuration”, pg. 5. 1.1 is DIP Switch Group A. 1.2 is DIP Switch Gr oup B. Refiérase a la sección “Configuración”, página 20. 1.1 representa el Grupo A de Interruptores DIP . 1.2 representa el Grupo B de Interruptores DIP See Hardwire Electrical Connections, pg. 9. 3.1 is the cover plate, 3.2 is the fi[...]

33 4 5 6 X/2 V olts X/2 V olts 6.1 X V olts X V olts X V olts X V olts 5.1 See Battery Connection, Pg.8. 4.1 is the fuse. X = Y our APS's Inverter's Nominal Input V oltage . (See specs.) Refiérase a la sección “Conexión de Baterías”, página 23. 4.1 representa el fusible. X = El V oltaje Nominal de Entrada del Inver sor del APS. ([...]

34 7 7.4 7.1 7.3 12V 8.6 8.1 8.3 8.4 12V 8.2 8.3 8.5 12V 8 7.2 Basic 12VDC Vehicular Battery Connection. See Pg.8. 7.1 is the alternator . 7.2 is the vehicle battery ground. 7.3 is the vehicle battery . 7.4 is the fuse. Conexión Básica de Baterías de 12V de CD en V ehículos. V ea página 23. 7.1 representa el alternador . 7.2 representa la cone[...]

35 1. Interruptor “Operating Mode” (Modo de operación) 2. Grupo A de Interruptores DIP (T odos los modelos) 3. Grupo B de Interruptores DIP (Modelos selectos únicamente) 4. “LINE” (Línea) (T odos los modelos) 5. “INV” (Inversor ) (T odos los modelos) 6. “LOAD” (Carga Conectada) 7. “CUT/BOOST” (disminuyendo / elevando) (Modelo[...]

36 93-1911 (200103046) 1111 W . 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www .tripplite .com 200103046 120V APS MV-cabinetEn-Sp 93-1911.qxd 7/2/01 10:18 AM Page 36[...]