Uniden D3097 manuale d’uso

D3097 base with answering system and cordless handset Base AC adapter (PS-0034) Telephone cord Battery cover Rechargeable battery pack (BT-1025) Not shown: Belt clip Not shown: Belt clip Charger AC adapter (PS-0035) Battery cover DCX309 accessory handset and charger If you purchased model number: You should have: D3097 None D3097-2 1 of each D3097-[...]

2 - English Important Safety Instructions! When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:  This unit is NOT waterproof . DO NOT expose it to rain or moisture.  Do not use this product near water, for example, nea[...]

English - 3 Installing Your Phone Charge the Battery 1. Unpack all handsets, battery packs, and battery covers. If you need to remove a cover, press in on the notch and slide the cover down and off. 2. Line up the battery connector with the jack inside the handset; the connector only fits one way. 3. Push the connector in until it clicks into place[...]

4 - English Getting to Know Your Phone Parts of the Base Front view Key (icon) What it does PLAy/STOP x In standby: start playing new messages. x While playing a message: stop playing messages. x While the phone is ringing: ignore this call (mute the ringer). VOLUME UP/DOwN ( + , - ) x In standby or while the phone is ringing: increase/decrease the[...]

English - 5 Key (icon) What it does DELETE x While playing a message: delete this message. x In standby: delete all messages. x While outgoing greeting is playing: Delete the greeting. Side View Key name What it does ViSUAL RiNGER In standby: adjust the brightness of the base visual ringer (see page 13). AUDiO RiNGER In standby: cycle through 4 dif[...]

6 - English Key (icon) What it does END/CLEAR x During a call: hang up. x In any menu or list: exit and go back to the previous operation. x While entering t ext: delete the last characte r, or press and hold to delete all the characters. #/SiLENT x When entering text: insert a space. x When entering a number: insert a 2-second pause. x When displa[...]

English - 7 Icon What it means The volume of the earpiece is boosted (see page 13). The ringer is turned off: this handset will not ring when a call comes in. You have a voice message waiting (see page 16). P Privacy Mode is on: no other handset can use the line or join your call. The speakerphone is on. The battery is 1) fully charged, 2) half cha[...]

8 - English Call Privacy Menu (O-Hook Menu Only ) This menu lets you turn Call Privacy on and off. With Call Privacy turned on, no other handsets can connect with your conversation. Going on-hook (ending your conversation) resets Call Privacy to off. Messages Menu Press MENU/OK and select Messages . You can select Play Message (from your answeri[...]

English - 9 Menu Option What it does T-coil Turn on T-coil mode to reduce noise on hearing aids equipped with a telecoil (T-coil) feature. T-coil mode shortens talk time, so keep your battery fully charged. Ringer Tones Choose this handset's ring tone. As you highlight each ring tone, you hear a sample. To confirm, press MENU/OK . Personal Rin[...]

10 - English Menu Option What it does Edit Voice Mail Edit your voice mail access number (see page 14). Time Adjustment Select Set by Caller ID to allow phone network to automatically set cordless phone system time. Call Blocking Menu See page 14 for a detailed description of the Call Blocking feature. Entering Text on Your Phone Use the 12-key dia[...]

English - 11 Changing the Volume To change the... When... Press... earpiece volume for each handset you are listening to that earpiece or speaker (playing messages, etc.) UP to increase the volume. DOwN to decrease it. speaker volume ringer volume* the phone is in standby * If you turn the ringer all the way down, that particular ringer turns off. [...]

12 - English Using Call Waiting If you get a Call Waiting call, the phone can sound a tone and display any CID information received for the waiting call. Press TALK/FLASH to switch between your current call and the waiting call; remember, each time you switch, there is a short pause before you're connected to the other caller. Using the Phoneb[...]

English - 13 USING SPECIAL FEATURES Using the Base Ringers Visual Ringer The visual ringer blinks for the following conditions:  New messages  Incoming call - outside line  Incoming call - page  Incoming call - intercom or intercom hold You can change the brightness of the base visual ringer. The ViSUAL RiNGER switch is on the right-han[...]

14 - English  To change the volume of CID announcements, change the ringer volume. To change the volume for all Caller Announce features, change the speaker volume.  To make sure it doesn't interrupt a call or an intercom page, the phone only uses Caller Announce when it starts out in standby.  It takes at least 2 rings for the phone [...]

English - 15 Choose this... To... Edit Edit this entry. The phone will prompt you to edit the name & phone number. Delete Erase this entry from the list & allow calls from this number. Blocking a Number With the phone in standby, open the menu, select Call Blocking, then Create New . Enter the name and number to be blocked. Press MENU/OK to[...]

16 - English Intercom  Whenever the phone is in standby, you can make an intercom call between handsets without using the phone line.  You can make an intercom call from any handset, but only two handsets can be in an intercom call at any time.  If an outside call comes in during an intercom page, the phone cancels the page so you can answ[...]

English - 17 If... Then... the handset and base are connected (intercom call) and no signal from the base the handset sounds an error tone and Out of Range displays. the handset is in Talk mode and moves out of range the outside line is put on Hold for 30 seconds and then dropped. The LCD alternately displays Out of Range and Check Base Power . the[...]

18 - English Menu Option What it does Answer On/Off Turn your answering system on or off. (To turn your system on or off from the base, just press ON/OFF .) Record Greeting Record an outgoing message or greeting (see below). Greeting Options Switch greetings or delete your greeting (see below). Accessing the Answering System With the phone in stand[...]

English - 19 Switch Between Greetings From the base From a handset 1. Press GREET . The system plays back the greeting it is currently using. 2. Press GREET again to switch greetings. 1. Press MENU/OK and select Answering Setup/ Greeting Options . 2. The current outgoing message plays. 3. During playback, press MENU/OK to switch between the preset [...]

20 - English To... From the base From a handset stop playback Press PLAy/STOP . Select 5:Stop . Screening Your Calls You can use the answering system for call screening . While the system takes a message, you can listen on the base speaker (if you turn on Call Screen ) or from a handset. Only one handset can screen calls at a time. If another hands[...]

English - 21 3. The system announces the time, the number of messages in memory, and a help prompt. It beeps intermittently to let you know it's waiting for a command. 4. When you hear beeping, enter a 2-digit command from the chart: # If you don't press any keys for 15 seconds, the phone will hang up and return to standby. IMPORTANT INFO[...]

22 - English Audio issues Possible solutions There’s a lot of noise or static on the line x Check for interference from appliances (microwave ovens, TVs, etc.) or wireless devices (baby monitors, WiFi equipment, etc.). Move the handset or base away from the interference source. x Try to adjust the audio tone. During a call, press TONE to cycle th[...]

English - 23 Answering system problems Possible solutions My outgoing message is gone. x If there was a power failure, re-record your personal outgoing message. I can’t hear the base speaker. x Make sure call screening is turned on. x Change the base speaker volume. Messages are incomplete. x Increase the Record Time . x Delete messages (memory m[...]

24 - English 1. Place the handset in the base; the display should say Handset Registering . 2. Wait until the handset display says Registration Complete (about 30 seconds), then pick up the handset and press TALK/FLASH . # If you don’t hear a dial tone or the disp lay says Registration Failed , charge the battery completely, then try again. Adapt[...]

English - 25 Warning! The cords on this product and/or accessories contain lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling. Compliance Information FCC Part 68 Information This equipment complies with Part 68 of the FCC rules and the req uirements adopted by the ACTA. On [...]

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful int[...]

English - 27 for a defect or malfuncon covered by this warranty, (E) used in any conjuncon with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's manual for this product. STATEMENT OF REMEDY: In the event that the product does not conform[...]

28 - English[...]