Uniden EXP 9100 manuale d’uso

Table of Contents About You r EXP 9100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Unpa ckin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FCC Requ ireme nts . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Important Safety Instructions When using your telephone equi pment, basic safety precauti ons should always be followed to reduce the risk of fi re, electrical shock , and injury to persons, including the fol lowing: 1. Read and understand all instructions . 2. Follow all warnings and ins tructions marked on the product. 3. Unplug this product from[...]

12. Unplug this product from the wall outlet and refer servicing to qualifi ed service personnel under the followi ng conditions: A. When the power supply cord i s damaged or frayed. B. If liquid has been spi lled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally when foll owing the o[...]

About Your EXP 9100 Congratulations on your purchas e of the Uniden EXP 9100 Cordless Telephone. The EXP 9100 is designed and engi neered to exacting standards for reliability, l ong life, and outstanding performance. To get the most from your EXP 9100 , please read this Operating Gui de thoroughly . Refer to the foldout located in the back of this[...]

EXP 910 0 Features Spread Spectrum Technology UltraClear Plus noise reduction prov ides the quality sound of a corded telephone. Auto Power Control Tone/Pulse Dialing 20-Number Memory Maximum Operating Range 3 One-Touch Memory Dialing B uttons Room Monitoring 2-Way Paging/Intercom Redial/Pause and Flash Spare Battery Charger/Battery Bac k-Up AutoSt[...]

If the Base Unit los es power while the Handset is off the Base, the Di gital Code may be erased. When this happens, the Handset wi ll not function. To restore the Digital Code: 1. Remove the Handset from the Base Unit (if it i s on the Base Unit). 2. Restore power to the Base Unit. 3. Place the Handset back on the Bas e Unit. The CHARGE LED will b[...]

Installing Your EXP 9100 Selecting the Installation Locati on Select a loc ation for the EXP 9100 to avoid excessi ve heat or humidity (as in a kitchen or bathroom). The Base Unit of your EXP 9100 can be placed on a desk or tabletop near a standar d 120V AC outlet and telephone line jac k, or mounted on a standard AT&T or GTE wall pl ate. Keep [...]

Installing the Base Uni t on a Desk or Tabletop NOTE: Refer to the foldout located in the bac k of this Operating Guide to help familiarize y ou with the controls of your cordless phone. 1. Place the Base Uni t on a desk or tabletop, and plug one end of the Telephone Line Cord (supplied) into the “ LINE IN ” jack on the Base. 2. Plug the other [...]

Mounting the Base Unit on a Wall Installing the Wall-Mount Adapter on the Base Unit 1. Remove the Handset from the Base Unit. 2. Lay the Base Unit face down on a flat, smooth surface. 3. Insert the two front tabs of the Wall Mount Adapter into the two receptacles next to the legs of the Base Unit. 4. Squeeze the two side tabs of the Wall Mount Adap[...]

Mounting on a Standard Wall Plate 1. Plug one end of the Telephone Line Cord (supplied) into the “ LINE IN ” jack on the top of the Base Unit. Lay the cord inside the molded channel on the bottom of the Wall Mount Adapter connected to the Base Unit. (Put any exc ess line cord ins ide the Wall Mount Adapter.) 2. Plug the other end of the Telepho[...]

4. Plug the AC Adapter cord into the AC Adapter input jack on the Base Unit. ( Note: Use only the AC Adapter supplied with the EXP 9100 . ) Place the c ord inside the molded channel on the Wall Mount Adapter connected to the Base Unit. 5. Place the Base Uni t onto the mounting screws and slide downward to secure. Then hang the Handset on the Base U[...]

Charging the Handset’s Battery Pack The rechargeable Nickel-Cadmium Batter y Pack must be fully char ged before using your EXP 9100 for the first time. ( Note: Allow the unit to charge without interruption for 5-7 hours. ) 1. Place the Handset on the Base Unit. 2. Make sure the CHARGE LED lights. If the CHARGE LED does not light, check to see tha[...]

Base Unit Battery Back-Up Feature If AC power to the Base Uni t fails, and the Spare Battery Charger contai ns a battery, the Base Unit wil l keep operating from the spare battery. This feature prevents the system fr om going dead during a power outage. Low Battery Indicator When the Battery Pack in the Handset is very low and needs to be c harged,[...]

Using Your EXP 9100 NOTE: Refer to the foldout located in the bac k of this Operating Guide to help familiarize y ou with the features of your cordless phone. Preparing the Base Unit and Handset 1. On the Base Unit, sel ect either Pulse Dialing or Tone Dialing, depending on your local s ervice. 2. Set the Base Unit RINGER / VOLU ME switch to either[...]

Answering a Call 1. The Handset rings and the green TALK LED and Keypad Lights fl ash. 2. If the Handset is not in the Base Unit, pr ess TALK to answer the call. 3. If the Handset is in the Base Unit, the Auto Talk feature allows you to answer the call by si mply picking up the Handset and beginning y our conversation. 4. When you finish the call ,[...]

Chain Dialing On certain occas ions, after dialing a number, you may be requested by the party or service y ou are calling to enter a special access code, such as when performing a banking transacti on. 1. Remove the Handset from the Base Unit. 2. Store the access code i nto one of the memory numbers. (See “Using Your EXP 9100 Memory.”) 3. Afte[...]

Using Your E XP 9100 Memory Storing a Number 1. Remove the Handset from the Base Unit 2. Press MEMO (The TALK LED lights and y ou hear a beep.) 3. Enter the number (up to 16 digits) you want to s tore. You may enter a delay between numbers (for ac cessing a switchboard, or long distance se rvice) by pressing RDL/P at the point in the number sequenc[...]

Storing Mixed Tone /Pu l se nu mbers: If your Base Unit is set up for Pulse Dialing, you c an store a mixed mode number (up to 16 digits) to easil y access long distance s ervices or other services requir ing Tone inputs. 1. Follow steps 1 and 2 in “Storing a Number,” then: 2. Enter the number to be dialed in Pul se Mode. 3. Press the TONE butt[...]

Paging the Base Unit While a Call is Holding 1. Press INT ’COM on the Handset. If no answer, press TALK or INT ’COM to disconnect and return to the call ON HOLD. 2. At the Base Unit, press INT’COM to answer the page. Speak into the microphone. 3. To turn off the Intercom press INT’COM at the Base Unit — OR — Press TALK on the Handset. T[...]

Troubleshooting If your EXP 9100 Cordl ess Telephone is not performing to your expectati ons, please try thes e simple steps. If you are st ill unable to resolv e the problems, contact Uniden Customer Ser vice at: (800) 297-1023, 8 AM to 5 PM Central, Monday through Friday. Note: Do not attempt to service this unit your self. All servi ce must be d[...]

Important Electrical Considerations Unplug all elec trical appliances when you know an elec trical storm is approaching. Lightning can pas s through your household wiring and damage any device connected to i t. The EXP 9100 is no exception. Note: Please do not attempt to unplug any appliance during an electric al storm. Range The EXP 9100 is des ig[...]

Specifications GENERAL The EXP 9100 compli es with FC C Pa r t 15 an d 6 8 . Frequency Control : Crystal controlled tr ansmission Modulation : MSK Operating Temperature : -10 ° to 50 ° C Base Unit Receive/Transmit Frequency : 903.087 to 925.615 MHz (23 Channels) Power Requirements : 120V AC, 60 Hz Size : 6 3 4 in. W X 7 8 in. D X 3 5 32 in. H 170[...]

® EXP 9100 Cor dless Te leph one Operating Guide[...]

PRECAUTIONS Before you read anything else, please observe the f ollowing: WARNING! Unid en America Corpor ation DOES NOT repr esen t this unit to be waterpro of. To reduce the risk of fire, electr ical sho ck, or damage to the un it , DO NOT expose thi s unit to r ai n or mois ture. NICKEL-CADMIUM BATTERY WARNING This equipment contains a Nick el-C[...]

One Year Limited Warranty WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warra nt s, for on e ye ar, to th e ori gi na l ret ai l owne r, this Unid en Pr oduct t o be f ree f rom d efects in ma teria ls and craf tsmans hip w ith only th e limi ta tion s or exclus ions set out bel ow. WARRANTY DURATION: This wa rra[...]

© 1993 Unid en Am erica Corpo ratio n. All righ ts re serve d. ZUDUD01304AZ Printed in Hong Kong ®[...]

Base Unit Controls & Functions Base Unit Antenna Batte ry Compartment Handset Retainer Handset Support Charging Contacts Microphone Intercom LED Speaker Interco m B u tto n Power LED Charge LED Battery Charge LED Fold Down Legs T one/Pulse Swit ch Ringer/V olume Swit ch Line Out Line In AC Adapter Connection[...]

Handset Controls & Functions Hold Butt on V olu m e an d Ringer V ol ume Butto n Handset Antenna T alk B u tto n Earpiece T one Button Mem ory Bu tton One-T ouch Buttons Mute B u tto n Intercom B u tton Mon ito r B u tton Monitor Speaker Microphone Flash and Ringer T one Butto n Redial/Pause Button Ring On Battery Save Switch 1 – 9, 0, , # Bu[...]