Uniden XC310 manuale d’uso

1 1 ,0.00'00'0 I ....... uni ~n@ XC 31 0 Cordless Telephone Operating Guide For Australia and New Zealand[...]

Table of Contents Important Safety Instructions 3 About your XC 310 """"""""""" ... 5 Unpacking 5 XC 31 0 Featu res. ... ... ... ... . . .. . """ . .. . ... ..... . ...... .. . ..... ... ..... . .. ... ... 6 Automatic Digital Code Security. 6 Base Unit Controls & Functions 7 [...]

PRECAUTIONS Before you read anything else, please observe the following: WARNING! Uniden Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. NICKEL-CADMIUM BATTERY WARNING . This equipment contains a Nickel-Cadmium Battery. . The[...]

Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wa[...]

12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. If the power supply cord is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally when following the operatin[...]

About Your XC 310 Congratulations on your purchase of the Uniden XC 310 Cordless Telephone. The XC 310 is designed and engineered to exacting standards for reliability, long life, and outstanding performance. To get the most from your XC 310, please read this Operating Guide thoroughly. Unpacking Your XC 310 box shouldcontain the following items: .[...]

XC 310 Features . UltraClear Plus noise reduction provides the quality sound of a corded telephone. . Eight 30/39 MHz Channels (Australia): Three 30/39 MHz Channels (New Zealand) . 20-Number Memory . Maximum Operating Range . Redial/Pause and Flash . AutoStandby . AutoTalk . Tone/Pulse Dialing (available on Australian Models only) . Automatic Digit[...]

Base Unit Controls & Functions TEL LINE "Ii 7[...]

TONE/PULSE Switch DC Input Jack TEL LINE Jack Handset Retainer Base Unit Antenna IN USE LED CHARGE LED PAGE/FIND Button Use this switch to select either Tone Dialing or Pulse Dialing. (Available on Australian Models only) Plug the AC Adapter cord into this jack. Then plug the AC Adapter into a standard wall outlet. Plug the supplied telephone line [...]

Handset Controls & Functions TAlKlBATT lOW LED Button TALK Button 1-9,0, TONE*, # Button MEM Button FLASHIR. TONE Button Handset Antenna ~ -- CHANNEL Button RING ON BATT SAVE Switch . 6~t . I~ QZ N!C DB' G)@@ aH JICI.. t.INO @@@ PAIl lN ~ (?)@@ @)@@) RDUP Button VOlUMEIR. VOl Button A..A8H VCJU.IIE II.e.! A. TONE A.VCL FI1.JP . . --- G:m[...]

Handset Antenna Flexible antenna. TALK/BA TT LOW LED CHANNEL Button TALK Button Numeric Keys MEM Button FLASH/R. TONE Button VOLUME/R. VOL. Button Redial/Pause (RDUP) Button RING ON/BA TT SAVE Switch This LED has a dual function: (a) When the phone is in use, the red LED lights steady. (b) When the battery pack is Iow and need to be recharged, the [...]

Read This Before Installation We have designed your telephone to conform to Australia or New Zealand Radio Frequency regulations, and you can connect it to most telephone lines. However, each device that you connect draws power from the phone line. We refer to the power drawn as the devices ringer equivalence number or REN. The REN is shown on the [...]

Installing the Telephone on a Desk or Tabletop Place the Base Unit on a desk or tabletop, and plug one end of the Telephone Line Cord (supplied) into the "TEL LINE" jack on the Base. Plug the other end of the cord into the telephone socket. The unique design of your XC 310 allows you to place the Handset on the Base Unit either facedown o[...]

If you are mounting the XC 310 on an existing standard wall plate: 1. Plug one end of the Telephone Line Cord (supplied) into the "TEL LINE" jack on the top of the Base Unit. Lay the cord inside the molding on the bottom of the Base Unit. Then plug the other end of the cord into the telephone wall socket. 2. Mount the Base Unit onto the w[...]

1. Remove the battery compartment cover on the Handset by sliding it down. 2. Connect the Nickel-Cadmium Battery Pack by plugging it into the socket at the top of the battery compartment. Note: The connector fits only one way and requires only a minimal amount of pressure to insert. Always install the Battery Cable with the BLACK wire to the left. [...]

Low Battery Indicator When the Battery Pack in the Handset is very Iow and needs to be charged, the TALK/BAIT lOW LED flashes every 3 seconds. If this occurs while you are on the phone, a short alert beep will also sound. When this happens, complete your call as quickly as possible, and return the Handset to the Base Unit for charging. Allow 12 to [...]

Placing a Call To place a call with your XC 310: 1. Remove the Handset from the Base Unit and press TALK. 2. Dial the number you are calling. 3. When you have finished the call, press TALK or return the Handset to the Base Unit. NOTE: If you don't place the Handset back on the Base Unit, you will need to press TALK to hang up the phone. Select[...]

Using the AutoStandby Feature When you finish a call and place the Handset back on the Base Unit, AutoStandbyautomatically hangs up the phone. There is no need to press TALK to hang up. NOTE: If you don't place the Handset back on the Base Unit, you need to press TALK to hang up the phone. NOTE: Sometimes when you press TALK to hang up the pho[...]

2. Enter the number to be dialed in Pulse Mode. 3. Press the If button on the Handset. (Note: The If button counts as one digit. ) 4. Enter the number to be dialed in Tone Mode. 5. If you wish to enter a delay between numbers (for accessing a switchboard, or long distance service), press RDLJP at the point in the number sequence you wish to pause. [...]

Using the Page Feature The Page feature sends a signal from the Base Unit to the Handset causin~ it to beep. This is useful for locating the Handset when it is away from the Base Unit. Press the PAGE button on the Base Unit and listen for the tone from the Handset. NOTE: The Page feature does not work when the phone is in use or when the Handset RI[...]

Troubleshooting If your XC 310 Cordless Telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service for assistance. Note: Do not attempt to service this unit yourself. All service must be done by qualified service personnel. 20 Problem Suggestion C[...]

Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. The XC 310 is no exception. NOTE: Please do not attempt to unplug any appliance during an electrical storm. Range The XC 310 is designed to ach[...]

Mai ntenance Care Your XC 310 Cordless Telephone is an example of superior design and craftsmanship. The following suggestions will help you care for your phone so that you can enjoy it for years. Keep the phone dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Use and store t[...]

Specifications General Frequency Control Modulation Operating Temperature Base Receive Frequency Transmit Frequency Power Requirements Size Weight Handset Receive Frequency Transmit Frequency Power Requirements Size Weight Battery Crystal controlled transmission FM -10° to 50° C 39.775 to 40.000 MHz (3ch NZ) 30.075 to 30.300 MHz (8ch AUST) 39.775[...]

WARRANTY Uniden XC 310 1 Year Warranty (Batteries and Accessories are covered for 90 days only) Note: Please keep your sales docket as it provides evidence of warranty. Warranty is only valid in the country where the product has been purchased. WARRANTOR: Uniden Australia Pty. Ltd. ACN 001 865498 Uniden New Zealand Limited ELEMENTS OF WARRANTY: Uni[...]

N etas[...]

unid~n@ Australia Pty. Ltd. 345 Princes Hwy, Rockdale, NSW. 2216. Ph (02) 599 3355 Fax (02) 599 4018 New Zealand Limited Cnr Ti Rakau Drive and Harris Road. East Tamaki, AUCKLAND Ph (09) 2744179 Fax (09) 2740009 CELLULAR TELEPHONES, CORD LES S TELEPHONES SCANNERS, CB RADIOS, UHF RADIO, MARINE RADIO, LAND MOBILE RADIO. UDZZO1309ZZ Printed in Hong Ko[...]