Uniden XS610 manuale d’uso

XS610 MANUAL OWNER’S[...]

CONTROLS AND FUNCTIONS 1 7 8 9 6 5 2 3 10 4 11 12 13 1. T alk - answers or places calls 2. Mem - stores or recalls numbers in memory 3. Volume ringer - sets the ringer or earpiece volumes 4. Microphone/ringer 5. T alk/batt low - LED indicates when phone is in use or the battery is low 6. Redial - redials the last number 7. Flash - access to call wa[...]

1 Included in your Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Important Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . .3 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Important Safety Instructions . . . . . . . . . . . . . . . . [...]

INCLUDED IN YOUR P ACKAGE Handset Base T o get the most from your phone, please read this owner’ s manual thoroughly . Be sure to complete and mail the product registration form. If any of these items are missing or damaged, contact your place of purchase immediately . Mounting Screws ● This Owner’ s Manual ● Registration Card ● and other[...]

3 Unplug all electrical appliances when you know an electrical storm is approaching. Lighting can pass through your household wiring and damage any device connected to it. This phone is no exception. Caution: Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by [...]

4 Before you read anything else, please observe the following: W arning! UNIDEN DOES NOT represent this unit to be waterproof. T o reduce risk of fire, electrical shock or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium Battery Warning • This equipment contains a rechargeable Ni-Cad battery . • The r[...]

PRECAUTIONS 5 When using your telephone equipment, these basic safety precautions should always be followed to reduced the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning, and use[...]

6 operating instructions. Improper adjustment of other controls may result in damage and will often require extensive repair work by a qualified technician.) E. If the product has been dropped or the cabinet has been damaged. F . If the product exhibits a distinct change in performance. 13. Do not use the telephone to report a gas leak in the vicin[...]

7 INTRODUCTION Congratulations on your purchase of the Uniden XS610 Cordless T elephone. This phone is designed to exacting standards which provide reliability , long life, and outstanding performance. ● 10 Channels (AUS) ● 25 Channels (NZ) ● Random Code ™ Digital Security ● UltraClear Plus ™ ● AutoT alk ™ ● 10 Number Memory ● R[...]

8 Selecting a Location Before choosing a location for your new phone, there are some important guidelines you should consider: • The location should be close to both a phone jack and power outlet. • Keep the Base Unit and Handset away from sources of electrical noise such as motors or fluorescent lighting. • Be sure there is sufficient space [...]

9 Charging the Battery Pack The rechargeable Nickel-Cadmium battery pack must be fully charged before using your phone for the first time. Before plugging the phone line into your new phone, you must charge the battery for approximately 15-20 hours without interruption. 1. Remove the Handset battery cover . 2. Plug the battery’ s cable into the h[...]

10 1. Plug the AC adaptor cord into the 9V DC input jack on the base. 2. Wrap the AC adaptor cord inside the molded strain-relief. 3. Plug one end of the long telephone cord into the TEL LINE jack on the base. 4. Plug the other end of the telephone cord into the telephone wall jack. (remember , the phone must be fully charged before you can use it.[...]

11 4. Fit the Wall Mounting adaptor to the Bottom of the telephone as shown. Mounting on a Standard Wall Plate The phone is designed to be mounted on a standard telephone wall plate. 1. Plug the AC adaptor into the base. 2. Place the AC adaptor cord inside the left molded channel cord holder . 3. Plug the telephone cord into the TEL LINE jack on th[...]

12 Mounting Directly on a Wall If you do not have a standard wall plate, you can mount the phone directly on a wall. Before mounting your cordless telephone, consider the following: Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Make su[...]

13 Raising the Antenna Before using your phone, be sure to fully raise the antenna to the vertical position. ADJUSTING RINGER/EARPIECE VOLUME CONTROLS Ringer T one and V olume 1. While the handset is not in use, press vol/ringer key . 2. The phone has two ringer tones, each with two volume levels. Press vol/ringer key again until you hear the ringe[...]

14 MAKING AND RECEIVING CALLS USING YOUR NEW PHONE When the phone rings, remove the handset from the base. ( Autotalk ) 1. Remove the handset from the base and press talk . 2. The talk LED lights. 3. Listen for the dial tone. 4. Dial the number . Return handset to the base. ( AutoStandby ) or press talk . 1. Remove the handset from the base and pre[...]

15 Y our XS610 phone has 10 memory locations for storing important telephone numbers. 1. Remove the handset from the base and press mem . The talk/batt low LED flashes and you hear a beep. 2. Enter the phone number you want to store (up to 16 digits). 3. Press mem and enter a number (0-9) on the keypad for the memory location you want to use. Y ou [...]

16 Australia If you have the “call waiting” service and a call waiting tone sounds while you are on a call, press flash then 2 to accept the waiting call. There is a short pause, then you will hear the new caller . T o return to the original caller press flash then 1 . New Zealand If you have the “call waiting” service and a call waiting to[...]

17 If you encounter interference while using your phone you can manually change the phones channel for clear operation. Interference can come from appliances or other phones in your home. This function works only when the phone is in use. The chan button on the handset allows you to choose between factory set channels (10 AUS/25NZ). During the cour[...]

18 TROUBLESHOOTING YOUR NEW PHONE If your XS610 cordless telephone is not performing to your expectations, please try these simple steps first before calling Uniden customer service . Caution: Do not attempt to service this until yourself. Servicing must be performed by qualified personnel. TROUBLE SHOOTING Charge light won’t come on when handset[...]

19 TROUBLESHOOTING No dial tone. ● Check the telephone line cord connectors at both ends that they are pushed in firmly until they click. ● If you had a power failure or had unplugged the base unit, replace the handset on the base unit for two to five second to reset the system. PROBLEM Does not ring. ● Y ou may have exceeded the Ringer Equiv[...]

20 Frequency Control: PLL Modulation: FM Operating T emperature: -10˚C to 50˚C Receive Frequency: 39.775 to 40.00 MHz (10 channels AUS) 39.800 to 40.450 MHz (25 channels NZ) T ransmit Frequency: 30.075 to 30.300 MHz (10 channels AUS) 30.100 to 30.750 MHz (25 channels NZ) Power requirements: 230V/240V AC 50 Hz Size (without antenna): 15mm (W) x 19[...]

21 One Y ear Limited Warranty Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited ACN 001 865 498 Uniden New Zealand Limited ELEMENT OF W ARRANTY : Uniden warrants to the original retail owner for the duration of this warranty , its XS610(herein after referred to as the Product), to be [...]

THANK YOU © 2000 Uniden Australia Pty Limited Uniden New Zealand Limited UDZZ01584ZZ FOR PURCHASING A UNIDEN PHONE![...]