Vivitek D837 manuale d’uso

D8 Series[...]

Copyright This publication, including all photographs, illustratio ns and software, is protected under international copy- right laws, with all rights reserved. Neither this man ual, nor any of the material contained herein, may be reproduced without written consent of the autho r. © Copyright 2010 Disclaimer The information in this document is su[...]

DLP Projector—User’s Manual — ii — Important Safety Information Important: It is strongly recommended that you read this sect ion carefully be fore using the projector. These safety and usage instructions will ensure that you enj oy many years of safe use of the pr ojector. Keep this manual for future reference. Symbols Used Warning symbols[...]

Preface Projector Installation Notice ¾ Place the projector in a horizontal p osition The tilt angle of the projector should not excee d 15 degrees, nor should the proje ctor be installed in any way other than the desktop and ceiling mou nt, ot herwise lamp life could decrease dramatically. ¾ Allow at least 50 cm clearance around th e exhaust ven[...]

DLP Projector—User’s Manual Power Safety ¾ Only use the supplied power cord. ¾ Do not place anything on the powe r cord. Place the power cord where it will not be in the way of foot traffic. ¾ Remove the batteries from the remote control whe n storing or not in use for a prolonged period. Replacing the Lamp Replacing the lamp can b e hazardo[...]

Preface – v – Main Features • Lightweight unit, easy to p ack away and transport. • Compatible with all m ajor video stan dards including NTSC, P AL, and SECAM. • A high brightness rating allows for present ations in daylight or in lit rooms. • Supports resolutions up to SXGA+ at 16.7 million colors to deliver crisp , clear images. • [...]

DLP Projector—User’s Manual — vi — Table of Contents GETTING STARTED .......................................................................................................................................................... 1 P ACKING C HECKLIST ................................................................................................[...]

Preface – vii – HDMI Q & A………… …………………….…………… ……………………………… …………………………….48 SPECIFICATIONS ............................................................................................................................................................. 49 S PECIFICATI[...]

DLP Projector – User’s Manual – 1 – G ETTING S TARTED Packing Checklist Carefully unpack the projector and che ck that the following items are included: D835 / D837 DLP P ROJECTOR R EMOTE CONTROL ( WITH ONE AAA BATTERY ) RGB CABLE P OWER CORD RGB TO C OMPONENT A DAPTER (O PTIONAL ) C ARRYING CASE CD-ROM (T HIS U SER ’ S MANUAL ) W ARRANTY[...]

DLP Projector—User’s Manual Views of Projector Parts D835 / D837 Front-right View 1 2 4 7 56 3 I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. IR receiver Receive IR sign al from rem ote control 6 2. Height-adj uster butto n Push to release height adjust er 3. Height adjuster Adjusts level of projector 15 4. Lens Projection Lens 5. Focus ring Focuses[...]

DLP Projector – User’s Manual Top view—On-screen Display (OSD) buttons and LEDs M E N U S O U R C E A U T O LAMP TEMP POWER 1 2 3 4 5 6 7 8 9 10 11 12 I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. (POWER) Turns the projector O n or Off 11 2. SOURCE Detects the input device 10 3. AUTO Optimizes image size, position, and resolution 4. ▲ (Up curso[...]

DLP Projector—User’s Manual Rear view USB HDMI S-VIDEO IN LAN RS-232C VIDEO IN AUDIO IN AUDIO L IN R OUT 12 V TRIGGER VGA OUT VGA IN-1 VGA IN-2 14 15 13 2 13 4 57 68 9 1 0 1 1 1 2 I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. AC IN Connect the POWER CABLE 11 2. S-VIDEO IN Connect the S-VIDE O CABLE from a video device 3. LAN (*) Connect a LAN CABLE[...]

DLP Projector – User’s Manual Bottom view I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. Ceiling support ho les Contact your dealer for in formation on mounting th e projector on a ceiling 2. Tilt adjustor Rotate adju ster lever to adjust angle po sition. 15 3. Lamp cover Remove whe n changing the l amp. 40 4. Height adjustor Adju ster drops down wh[...]

DLP Projector—User’s Manual Remote Control Par ts Important: 1. Avoid using the projector with bright fluoresc ent lighting turned on. Certain high-frequency fluo- rescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the re mote control and the proj ector. If the path be- tween the remote control an[...]

DLP Projector – User’s Manual – 7 – I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. IR transmitter Transmit s signals to projector 2. Status LED Lights when th e remote control i s used 3. Laser Press to operate the on-screen pointer 4. Up Up arrow whe n connect ed through USB to a PC 5. Right Right ar row when con n ected through USB to a PC 6. [...]

DLP Projector—User’s Manual – 8 – Remote Control Operating Range The remote control uses infrared transmission to cont rol the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the re mote will function well within a [...]

DLP Projector – User’s Manual S ETUP AND O PERATION Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. 2. Insert the battery with the positive side facing up. 3. Replace the cover. Caution: 1. Only use AAA batteries (Alkaline batteries are recommended). 2. Dispose o[...]

DLP Projector—User’s Manual Connecting Input Devices A PC or note book computer and video devices can be connected to the projector at the same time. Video devices include DVD , VCD, and VHS players, as we ll as movie camc orders and di gital sti ll cam eras. Check the user manu al of the connectin g device to confir m it has the appropriate ou[...]

DLP Projector – User’s Manual Starting and Shutting down t he Projec tor 1. Connect the power cord to the projector. Connect the other end to a wall outlet. The POWER LED on the projector light. 2. Turn on the connected devices. 3. Ensure the LAMP LED not a flashing orange. Then press the POWER button to turn on the projector. The projector spl[...]

DLP Projector—User’s Manual 5. When the “Power Off? /Press Power again” message appears, press the POWER button. The projector turns off. Caution: 1. Be sure to remove the lens cap before starting projector. 2. Do not unplug the power cord until the LAMP LED stops flashing–indicati ng the projector has cooled down. – 12 –[...]

DLP Projector – User’s Manual Setting an Access Password (Security L ock) You can use the four (arrow) buttons to set a password and pr event un authorized use of the projector. When enabled, the password must be entered after you p ower on the projector. (See Navigating the OSD on page 18 and Setting the OSD Language on page 19 for help on usi[...]

DLP Projector—User’s Manual 5. You can use the cursor buttons ▲▼◄► either on keypad or IR remote control for password entry. You can use any combination including the same arrow five times, but not less than five. Press the cursor buttons in any order to set the password. Push the MENU button to exit the dialog box. 6. The password conf[...]

DLP Projector – User’s Manual Adjusting the Projector Level Take note of the following when setting up the projector: • The projector t able or stand should be level and sturdy . • Position the projector so that it is perpendicular t o the screen. • Ensure the cables are in a safe location. Y ou could trip over them. A B C D 1. To raise t[...]

DLP Projector—User’s Manual Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom control (on the projector only) to resize the pro- jected image and screen size B . 2. Use the Image-focus control (on the projector only) to sharpen the pro- jected image A . 3. Use the KEYSTONE buttons (on the projector or the remote control) to correct i[...]

DLP Projector – User’s Manual Adjusting the Volume 1. Press the Volume +/- buttons on the remote control. The volume control appears on the display. 2. Press the Left or Right Cursor buttons on the keypad to adjust Volume +/- . M E N U S O U R C E A U T O LAM P TEMP POWER 3. Press the MUTE button to turn off the volume (This feature is availabl[...]

DLP Projector—User’s Manual O N -S CREEN D ISPLAY (OSD) M ENU S ETTINGS OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and c hange various settings. Navigating the OSD You can use the remote control curs or buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The following[...]

DLP Projector – User’s Manual Setting the OSD Language Set the OSD language to your pr eference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to Installation I. 2. Press the cursor ▲▼ button until Language is highlighted. 3. Press the cursor ◄► button until the language you want is highlighted. [...]

DLP Projector—User’s Manual OSD Menu Overview Use the following illustration to quickly find a se tting or determine the range for a setting. – 20 –[...]

DLP Projector – User’s Manual OSD Sub-Menu Overvie w Note: (*) For D837 only – 21 –[...]

DLP Projector—User’s Manual Image Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu . Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change values for settings. I TEM D ESCRIPTIO N Display Mode Press the cursor ◄► button to set the Display Mode. B[...]

DLP Projector – User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ► . Press ▼▲ to move up and down in the Advanced menu. I TEM D ESCRIPTIO N Color Space Press the cursor ◄► button to adju st the color spac[...]

DLP Projector—User’s Manual Color Manager Press (Enter) / ► to enter the Color Manager sub menu. I TEM D ESCRIPTIO N Red Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Green Select to enter the Green Col or Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Blue[...]

DLP Projector – User’s Manual Computer Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Com- puter menu. Press the cursor ▲▼ button to move up and down in the computer menu. Press ◄► to change values for settings. I TEM D ESCRIPTIO N Horizontal Position Press the cursor ◄► button to adju[...]

DLP Projector—User’s Manual Video/Audio Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄► to change values for settings. I TEM D ESCRIPTIO N Video AGC Press the ◄► buttons to enabl e or disa[...]

DLP Projector – User’s Manual Audio Press (Enter) / ► to enter the Audio sub menu. I TEM D ESCRIPTIO N Volum e Press the ◄► butt ons to ad just the audi o volum e. (Range: 0~8) Mute Press the ◄► buttons to turn on or off t he speaker. Audio In put Press the cursor ◄► button to select audio input. (Range: Mini ~ RCA) – 27 –[...]

DLP Projector—User’s Manual Installation I Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press ◄► to change values for settings. I TEM D ESCRIPTIO N Language Press the cursor ◄► button to[...]

DLP Projector – User’s Manual Advanced Press (Enter) / ► to enter the Advanced sub menu. I TEM D ESCRIPTIO N Security Lock Press the cursor ◄► button to enable or disable security lock function . Keypad Lock Press th e cursor ◄► button to enable or disable ke ypad lock function. Wall Color Press the cursor ◄► button to select diff[...]

DLP Projector—User’s Manual Presentation Timer Press (Enter) / ► to enter the Presentation Timer sub menu. I TEM D ESCRIPTIO N Timer Press the cursor ◄► button to enable or disable presentation timer functio n. Timer Period Press the cursor ◄► button to adjust the display timer period. Timer Reset Press (Enter) / ► to reset presenta[...]

DLP Projector – User’s Manual Installation II Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu. I TEM D ESCRIPTIO N Auto Source Press the cursor ◄► button to enab le or disable automati c sourc[...]

DLP Projector—User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu. Press ▲▼ to move to the Advanced menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced menu. Press ◄► to change values for setting. I TEM D ESCRIPTIO N OSD Menu Setting [...]

DLP Projector – User’s Manual OSD Menu Setting I TEM D ESCRIPTIO N Menu Position Press ◄► button to select diffe rent OSD locati on. Translucent Menu Press ◄► butt on to select O SD backgroun d translucent le vel. Menu Disp lay Press ◄► button to select O SD timeout delay. Peripheral Test I TEM D ESCRIPTIO N Remote Control Test Pres[...]

DLP Projector—User’s Manual Lamp Hour Reset Please refer to Resetting the Lamp on page 42 to reset the lamp hour counter. – 34 –[...]

DLP Projector – User’s Manual Network (*) I TEM D ESCRIPTIO N Network State Displays the netw ork connection status. DHCP Press ◄► to turn DHCP On or Off. Note: If you select DHCP Off, complete the IP Address, Subne t Mask, Gateway, and DNS fields. IP Address Enter a valid IP a ddress if DHCP is turned off. Subnet Mask Enter a valid Subnet [...]

DLP Projector—User’s Manual For simplicity and ease of operation, the proj ector provides diverse networking and rem ote management features. The LAN/RJ45 function of the pr ojector through a network, such as remotely manage: Power On/Off, Brightness and Contra st settings. Also, projector stat us information, such as: Video-Source, Sound-Mute,[...]

DLP Projector – User’s Manual 3. Right-click on Local Area Connection , and select Properties . 4. In the Properties window, select the General tab, an d select Internet Protocol (TCP/IP) . 5. Click Properties . 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK . – 37 –[...]

DLP Projector—User’s Manual 7. Press the Menu button on the projector. 8. Select Installation II → Advanced → Network . 9. After getting into Net work , input the following: ` DHCP: Off ` IP Address: 10.10.10.10 ` Subnet Mask: 255.255.255.0 ` Gateway: 0.0.0.0 ` DNS Server: 0.0.0.0 10. Press (Enter) / ► to confirm settings. Open a web brow[...]

DLP Projector – User’s Manual Factory Reset Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Factory Reset sub menu and press (Enter) / ► to reset all the menu items to the factory default values (expect Language and Security Lock). Status Press the cursor ▲▼ button to move up and down in the Inst[...]

DLP Projector—User’s Manual – 40 – M AINTENANCE AND S ECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be r eplaced with a certified replacement part, which you can order from your local dealer. Important: a. The projection lamp used in this produc t contains a small amount of me[...]

DLP Projector – User’s Manual 3. Remove the two screws from the lamp module. 4. Lift the module handle up. 5. Pull firmly on the module handle to remove the lamp module. 6. Reverse steps 1 to 5 to install the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage. Note: The lamp module[...]

DLP Projector—User’s Manual Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 1. Press the MENU button to open the OSD menu. 2. Press the cursor ◄► button to move to the Installation II menu. Press the cursor button to move down to Advanced . 3. Press the cursor ▼▲ butto[...]

DLP Projector – User’s Manual – 43 – Cleaning the Projector Cleaning the projector to remove dust and gr ime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn. 2. Use only a dampened cloth when cleaning. Do not[...]

DLP Projector—User’s Manual Using the Kensingt on ® Lock If you are concerned about security, attach the proj ector to a permanent obje ct with the Kensington slot and a security cable. USB HDMI S-VIDEO IN LAN RS-232C VIDEO IN AUDIO IN AUDIO L IN R OUT 12 V TRIGGER VGA OUT VGA IN-1 VGA IN-2 Note: Contact your vendor for details on purchasing a[...]

DLP Projector – User’s Manual – 45 – T ROUBLESHOOTING Common problems and solut ions These guidelines provide tips to deal with problem s you may encounter while using the projector. If the problem remains unsolved, cont act your dealer for assistance. Often after time spent troubleshooting, the problem is traced to something as simple as a[...]

DLP Projector—User’s Manual – 46 – LED Error Messages E RROR C ODE M ESSAGE S P OWER LED B LINK O VER T EMP LED L AMP LED B LINK Over temperature 0 ON 0 Thermal brea k status error 4 0 0 Lamp error 0 0 On Fan1 error 6 0 1 Fan2 error 6 0 2 Fan3 error 6 0 3 Lamp door o pen 7 0 0 DMD error 8 0 0 Color wheel e rror 9 0 0 In the event of an erro[...]

DLP Projector – User’s Manual – 47 – Lamp Problems Problem: There is no light from the projector 1. Check that the power cable is secure ly connected. 2. Ensure the power source is goo d by te sting with another electrical device. 3. Restart the projector in the co rrect order and check that the Power LED is g reen. 4. If you have replaced [...]

DLP Projector—User’s Manual – 48 – HDMI Q & A Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI cable? Recently, HDMI Licensing, LLC announ ced that cables would be tested as Standard or High- Speed cables. ․ Standard (or “category 1”) HDMI ca bles have be en tested to perform at speeds of 7[...]

DLP Projector – User’s Manual – 49 – S PECIFICATIONS Specifications Model D835 D837 Display ty pe TI DMD XGA 0.55” Resolution XGA 1024x768 Native Projection distance 1 meters ~ 10 meters Projection screen size 23 to 300 inches Projection lens Manual Focus/Manual Zoom Zoom ratio 1.1 Vertical keystone correcti on +/- 15 degrees Projection m[...]

DLP Projector—User’s Manual Projection Distance vs. Projection Si ze D835 / D837 Projection Distance and Size Table D835/D837 T ELE W IDE Distance (m) 1.32 3.51 4. 39 8.78 1.57 3.14 3.92 10.00 Diagonal (inches) 30 80 100 200 40 80 100 255 Keystone (degree) 12.53 12.53 12.53 12.53 13.97 13.97 13.97 13.97 Image Height (mm) 457.2 1219.2 1524 3048 [...]

DLP Projector – User’s Manual – 51 – D835/D837 Timi ng Mode Table S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO C OMPONENT RGB DVI / HDMI NTSC － 15.734 60.0 O － － － PAL/SECAM － 15.625 50.0 O － － － 720 x 400 37.9 85.0 － － O O 640 x 480 31.5 60.0 － － O O 640 x 480 37.9 72.0 － － O O 640 x [...]

DLP Projector—User’s Manual – 52 – S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO C OMPONENT RGB DVI / HDMI 1600 x 1200 75.0 60.0 － － O O 640 x 480 35.0 66.68 － － O O 832 x 624 49.725 74.55 － － O O 1024 x 768 60.24 75.0 － － O O Apple Mac 1152 x 870 68.68 75.06 － － O O 480i 15.73 4 60.0 － O －[...]

DLP Projector – User’s Manual Projector Dimensions 209mm [8.2inch] 280mm [1 1.0inch] 93mm [3.7inch] – 53 –[...]

DLP Projector—User’s Manual – 54 – R EGULATORY C OMPLIANCE FCC Warning This equipment has been tested and found to comply wi th the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection against harmful interference when the equipm ent is operated in a commerci[...]

201003 2010 V ivitek Corporation. All rights reserved. All trademarks are the property of their respective owners. All specifications are subject to change without prior notice.[...]