VTech VT5820 manuale d’uso

1 Introduction EXPAND YOUR VT5831 SYSTEM. YOUR BASE WILL WORK WITH UP TO 6 HANDSETS!!! IMPORTANT: The VT5820 is an Accessory Handset for use with the VT5831 system. You must have this model in order to use the VT5820 Accessory Handset. This manual is designed to familiarize you with the VT5820 Accessory Handset setup, registration and basic functio[...]

2 When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liqu[...]

3 B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, because improper adjustment of other controls may result in damage. E. If the product h[...]

4 Registration And Operation Of The VTECH VT5820 Accessory Handset Your VTECH VT5831 system can operate up to 6 Handsets. The VTECH accessory Handset consists of the following: Setup Belt Clip Charger W all Mounting Brack et Handset T elephone Line Cord Handset Charger Battery Pack 3 1 5 Setup Of The VT5820 Accessory Handset 1. Plug the AC power ad[...]

5 Installation of Battery Pack in Handset 2 1 3 As you register additional Handsets to the system, they will be assigned extension numbers in the following order: HANDSET 2, HANDSET 3, HANDSET 4 , and so forth. Whenever a charged Handset battery pack is installed, the Handset will automatically begin SEARCHING FOR BASE (if previously registered), o[...]

6 Registration Enter Base ID Code 1 . After charging the Handset, remove it from its Charge Cradle; the screen will display: alternating with this screen: 2 . If, after charging the Handset, you see: 3 . Press NEW. You will now see the ENTER BASE ID screen as described in step 1. 4 . Find the BASE ID Code by doing the following: (the Base must be i[...]

7 The Handset Layout 1. Antenna 2. Earpiece 3 . Headset Jack (2.5mm) 4 . On (Flash) 5 . Dialing Keys (0-9, , #) 6. Speakerphone 7 . Message Waiting LED 1 2 3 4 5 6 7 8 9 10 11 12 13 8 . LCD Display 9. Soft Keys 10. Volume 1 1. Off (Clear) 1 2 . Sound Select 13. Microphone *[...]

8 Handset Indicators Handset LEDs LED Message Waiting Description • Blinks to indicate that you have new voicemail messages. Service must be subscribed to through your local telephone company. Handset Icons Icon Description Line In Use indicator On steady with no number next to it when a parallel set is in use. On steady with one or more numbers [...]

9 Your VT5820 cordless Handset is equipped with a 2.5mm Headset Jack for use with an optional accessory Headset for hands-free operation. If you choose to use the Headset option, you must obtain an optional accessory Headset, which is compatible with the VT5820. To purchase a Headset, call VTECH Customer Service at 1-800-595-9511. Once you have a c[...]

10 Taking Care Of Your Telephone Your VT5820 cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the Handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use[...]

11 In Case Of Difficulty If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTECH Communications at 1-800-595-9511. In Canada, call VTECH Electronics at 1-800-267-7377. The Phone Doesn't Work At All • Make sure the Power Cord is plugge[...]

12 Your Handset vibrates or shakes when a call comes in • It is likely that your Vibrating Handset Ringer option has been set to ON . If you’d like to turn it off, see VT5831 User’s Manual - Handset Settings - VIBRATE CONTROL , on page 22. You Hear Other Calls While Using Your Phone • Disconnect your Base Unit from the telephone jack, and p[...]

13 W arranty Statement What does this limited warranty cover? • The manufacturer of this VTECH product, VTECH Communications , warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the product and all accessories provided by VTECH in the sales package (“Product”) are free from material defects in material and [...]

14 6 . Product purchased, used, serviced, or shipped for repair from outside the United States, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes ); or 7 . Product returned without valid proof of purchase (see 2 below); or 8 . Charges for installation or set up, adjustment of customer c[...]

15 State Law Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the product is fit for ordinary use) are limited to one year from date of purchase[...]

16 This equipment complies with Parts 15 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS-03 of Industry and Science Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, in[...]

17 FCC Part 68 and A C T A If this equipment was approved for connection to the telephone network prior to July 23, 2001, it complies with Part 68 of the Federal Communications Commission (FCC) rules. If the equipment was approved after that date, it complies with the Part 68 rules and with Technical Requirements for Connection of Equipment to the [...]

18 company may temporarily discontinue your telephone service. The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a[...]

19 FCC, A CT A and IC Regulations Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not preven[...]

20 FREQUENCY CONTROL Crystal controlled PLL synthesizer TRANSMIT FREQUENCY Base : 5744.736-5825.952 MHz Handset : 2401.056-2482.272 MHz RECEIVE FREQUENCY Base : 2401.056-2482.272 MHz Handset: 5744.736 - 5825.952 MHz CHANNELS 95 Channels NOMINAL EFFECTIVE RANGE Maximum power allowed by FCC and IC. Actual operating range may vary according to environ[...]

21 91-5827-30-00 ISSUE 0 VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc.; Beaverton, Oregon. Distributed in Canada by VTech Electronics Canada Ltd., Suite 200, 7671 Alderbridge Way, Richmond, B.C. V6X 1Z9. Copyright 2002 for VTECH TELECOMMUNICATIONS LTD. Printed in China[...]