Weslo IMTL 15905.0 manuale d’uso

USER'S MANUAL CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. IMTL15905.0 Serial No. Find the serial number in the location shown below. Write the serial number in the space above for reference. Visit our website at www .weslo.com [...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . .[...]

1. It is the responsibility of the owner to ensure t hat all users of this incline trainer are ade- quately informed of all warnings and precau- tions. 2. Use the Incline Trainer only as described. 3. Place the Incline Trainer on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the Incline Tra[...]

2 1. Do not change the incline of the Incline Trainer by placing objects under the Incline Trainer. 2 2. Use the upper body handles only at walking s peeds. Using the handles and not holding the handrails may compromise your ability to maintain your balance. Exercises using the handles should be attempted only by experi- enced users. 23. When foldi[...]

Thank you for selecting the revolutionary IMAGE ® A DVANCED 3000 Incline Trainer. The ADVANCED 3000 Incline Trainer offers a selection of features de- signed to make your workouts at home more enjoyable and e ffect ive. And when you’re not exercising, the u nique ADVANCED 3000 Incline Trainer can be folded up, requiring less floor space. For you[...]

ASSEMBL Y T o hire an authorized service technician to assemble the Incline Trainer, call toll-free 1-800-445-2480. Assembly requires two persons. Set the Incline Trainer in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the Incline Trainer walking belt is[...]

7 2. Insert a Handrail (67) into the Upper Handrail (68) as shown. The lower end of the Handrail should sit on the B ase Hood (105) as shown. (Note: It may be necessary to twist the Handrail as you insert it. It may also be neces- s ary to loosen the two Screws [3] several turns.) Next, tighten two 3/4” Screws (66) into the Handrail. If you loose[...]

8 6. Attach the Upright Base Pad (103) and the six Base Pads (93) to the bottom of the Upright Base (96) with ten 3/4” Tek Screws (94) as shown. 94 94 94 103 93 94 96 93 94 94 94 94 93 93 93 93 6 5. With the help of a second person, carefully tip the Upright Base (96) to the position shown. Remove the four indicated bolts and washers attaching t [...]

9 8. Fold the Incline Trainer to the storage position (see HOW TO FOLD THE INCLINE TRAINER FOR STORAGE on page 28). Slide the Right Wheel Bracket (59) into the slot in the Right Rear Endcap (57). Align the holes in the Bracket with the holes in the Frame (43). Attach the Bracket to the Frame with two 1” Bolts (55). Attach the Left Wheel Bracket ([...]

10 2. Connect the wire on the receiver (A) to the indicated wire extending from the console. Hold the receiver so the small cylinder is oriented as shown and is facing the console. Attach the receiver to the plastic posts on the Access Door (112) with the two included small screws. 3. See step 1 on page 9. Make sure that no wires are pinched, and r[...]

1 1 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your incline trainer features a walking belt coated with high-performance lubricant. IMPORTANT: Never a pply silicone spray or other substances to the w alking belt or the walking platform. Such sub- stances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE [...]

12 FEATURES OF THE CONSOLE The advanced console offers an impressive array of features designed to help you get the most from your exercise. When the manual mode of the console is se- lected, the speed and incline of the Incline Trainer can be changed with the touch of a button. As you exer- cise, the console will provide continuous exercise feed- [...]

HOW TO TURN ON THE POWER Plug in the power cord. See page 11. Move the reset/off circuit breaker to the reset position. Locate the reset/off cir - cuit breaker on the Incline Trainer near the power cord. Make sure that the circuit breaker is in the reset position. Attach the clip to the waistband of your clothes. Stand on the foot rails of the Incl[...]

14 Change the incline of the Incline Trainer as desired. To change the incline of t he Incline Trainer, press the Inclin e in- crease and decrease buttons. Each time a button is pressed, the incline will change by 0.5%. To cha nge the i ncli ne setting quickly, press the 1-step Incline buttons. Note: It may take a few seconds for the Incline Train [...]

15 To reset the displays, press the Stop button, re- move the key, and then reinsert the key. Measure your heart rate if desired. To use the op- tional chest pulse sensor, see the in- structions included with the chest pulse sensor. To use the handgrip pulse sensor, see the instructions below. Note: If there are sheets of clear plastic on the metal[...]

16 HOW TO USE A SPEED PROGRAM OR AN INCLINE PROGRAM The console offers 5 speed programs and 10 incline programs. All 15 programs automatically control the speed and the incline of the Incline Trainer as they guide you through effective workouts. Speed programs regulate the intensity of your exercise primarily by varying the speed of the walking bel[...]

17 The program will continue until the setting for the last segme nt is shown in the Current Segment c olumn and the last segment ends. The walking belt will then slow to a stop. If the speed or incline setting is too high or too low at any time during the program, you can manually override the setting by pressing the Speed or Incline buttons. Howe[...]

18 H OW TO CREATE A CUSTOM PROGRAM If desired, you can create your own custom workout p rograms and store them in memory for future use. Up t o four different programs can be stored at the same time. Follow the steps below to create a custom program. Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. Select one of the custom [...]

19 H OW TO USE A CUSTOM PROGRAM Follow the steps below to use a custom program. Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. Select one of the custom programs. To select a cus- tom program, press the Speed Programs/ Cu st om button re- peatedly. As each custom program is selected, the Custom indicator will light and a [...]

20 Turn on the fans if desired. S ee step 7 on page 15. Use the upper body handles if desired. See step 8 on page 15. When you are finished exercising, remove the key. See step 8 on page 17. H OW TO USE A PULSE PROGRAM The four pulse programs automatically adjust the speed and incline of the Incline Trainer to keep your heart rate near a target lev[...]

21 Enter a maximum speed setting. A fter you have entered your age, the letters “SPd” will appear in the F at Calories/ Calories/Pulse display and the maximum speed setting of the program will begin to flash in the Time/Distance display. If desired, press the + and – buttons below the matrix to change the maxi- mum speed setting. Press the St[...]

22 HOW TO CONNECT THE INCLINE TRAINER TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CDs , the Incline Trainer must be c onnected to your portable CD player, portable stereo, h ome stereo, or computer with CD player. See pages 22 and 23 for connecting instructions. To use iFIT.com videocassettes , the Incline Trainer must be con- nected to you[...]

23 HOW TO CONNECT YOUR HOME STEREO N ote: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is b eing used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the Incline Trainer near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter i[...]

24 HOW TO CONNECT YOUR VCR N ote: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is b eing used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 23. A. Plug one end of the audio cable into t[...]

25 During the CD or video program, an electronic “chir ping” so und will alert you when the speed a nd/or incline of the Incline Trainer is about to change. CAU TION : Always listen for the “chirp” a nd be prepared for speed and /or in cli ne changes. In some instances, the speed and/or incline may change before the personal trainer describ[...]

26 HOW TO USE A PROGRAM DIRECTLY FROM OUR WEB SITE To use programs from our Web site, the Incline Trainer must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 23. In addition, you must have an internet connection and an internet service provider. A list of specific system requirements is found on our Web site. Follow th[...]

27 THE INFORMATION MODE/DEMO MODE T he console features an information mode that keeps track of the total number of miles that the walking belt h as moved and the total number of hours that the Incline Trainer has been operated. The information mode also allows you to switch the console from miles to kilometers. In addition, the information mode al[...]

28 HOW T O FOLD AND MOVE THE INCLINE TRAINER HOW TO FOLD THE INCLINE TRAINER FOR STORAGE Before folding the Incline Trainer, adjust the incline to th e lowest position. If this is not done, the Incline Trainer m ay be permanently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 poun ds (20 kg) to raise,[...]

29 HOW TO LOWER THE INCLINE TRAINER FOR USE 1. Hold the upper end of the Incline Trainer with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the Incline Trainer down until the frame is past the pin on the latch knob. 2. Hold the Incline Trainer firmly with both hands, and lower the Incline Trainer[...]

TROUBLESHOOTING Most Incline Trainer problems can be solved by following the steps below. Find the symptom that ap- plies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the s[...]

Locate the Reed Switch (20) and the Magnet (8) on the left side of the Pulley (7). Turn the Pulley until the M agnet is aligned with the Reed Switch. M ake sure that the gap between the Magnet and the Reed S witch is about 1/8”. I f necessary, loosen the Screw (21), move the Reed Switch slightly, and then retighten the Screw. Reattach the Hood (3[...]

32 PROBLEM: The incline of the Incline Trainer does not change correctly or does not change when iFIT.com CDs and videocassettes are used SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- m ove the key. A fter a few seconds, reinsert the key. The Incline Trainer will automatically rise to[...]

33 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex - ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with[...]

P ART LIST—Model No. IMTL15905.0 R0905A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. Description Key No. Qty. Description 1 2 Foot Rail 2 1 Left Front Endcap 3 23 3/4” Screw 4 2 Frame Pivot Bolt 5 2 Rear Roller Washer 6 1 Motor Belt 7 1 Front Roller/Pulley 8 1 Magnet 9 2 Frame Pi[...]

Key No. Qty. Description Key No. Qty. Description 103 1 Upright Base Pad 104 2 Incline Motor Bolt, Bottom 105 1 Base Hood 1 06 1 Left Inner Cover 107 1 Bottle Holder 1 08 1 Upright Cover, Back 109 1 Pulley Shaft 110 1 Upright 111 1 Bottle Holder Clamp 112 1 Access Door 113 1 Upper Body Mechanism 114 1 Resistance Motor 115 1 Upright Cover, Front 116[...]

16 15 19 21 17 14 120 13 1 1 24 26 20 22 23 1 1 2 10 9 8 12 120 40 25 26 1 1 44 39 42 42 47 48 43 45 46 49 50 51 5 53 13 52 52 54 57 49 56 55 5 51 53 53 54 53 52 59 46 55 52 13 45 42 58 42 41 44 39 9 10 70 3 3 3 38 70 4 37 3 3 3 3 3 3 36 32 35 32 32 33 32 29 28 4 12 18 27 13 27 13 34 34 41 7 70 70 124 32 125 123 122 126 127 128 121 46 45 46 45 120 [...]

68 64 62 61 60 3 3 67 65 88 60 3 3 67 90 87 3 90 89 87 85 93 96 3 94 3 95 97 98 54 99 3 94 93 13 3 99 54 3 94 98 97 3 3 93 94 94 94 94 94 103 100 13 101 13 104 82 69 83 84 83 82 105 107 108 81 106 73 75 71 71 71 80 80 78 74 79 74 78 1 15 78 78 109 1 1 1 81 48 1 14 66 1 13 21 21 3 48 48 1 16 1 16 1 17 1 18 1 19 93 94 93 94 93 30 63 102 1 10 71 71 71[...]

Part No. 234257 R0905A Printed in USA © 2005 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, see the front cover of this manual. When ordering parts, please be prepared to give the following information: • the MODEL NUMBER OF THE PRODUCT (IMTL15905.0) • the NAME OF THE PRODUCT (IMAGE ADVANCED 3000 Incline Trainer) • the[...]