Weslo R 7.2 manuale d’uso

Model No. WLTL39712.0 Serial No. Write the serial number in the space above for reference. USER’S MANUAL CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Keep this manual for future reference. www.weslo.com QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; p[...]

2 256835 This drawing shows the locations of the warn- ing decals. If a decal is missing or illegible, call the telephone number on the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decals may not be shown at actual size. WARNING DECAL PLACEMENT WESLO is a registered trademark of I[...]

3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. 3. Use the treadmill only as described in [...]

4 20. The heart rate monitor is not a medical device. V arious factors, including the user’s movement, may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determin- ing heart rate trends in general. 21. Never leave the treadmill unattended while it is running. Always remove the key , press[...]

5 Thank you for selecting the new WESLO ® CADENCE R 7.2 treadmill. The CADENCE R 7.2 treadmill offers a selection of features designed to make your workouts at home more effective. And when you’re not exercis- ing, the unique treadmill can be folded up, requiring less than half the oor space of other treadmills. For your benet, read this m[...]

6 To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dis pose of the packing materials until assembly is completed. Note: After shipping, there may be an oily substance on the exterior of the treadmill. T[...]

7 3. Attach a Wheel (84) to one side of the Base (85) with a 3/8" x 2 1/4" Bolt (8), two Wheel Spacers (83), and a 3/8" Nut (13) as shown. Do not over- tighten the Bolt; the Wheel should turn freely . Attach the other Wheel (84) in the same way . 85 84 13 83 83 8 84 3 2. Orient the Left Upright (77) as shown, and attach it to the Bas[...]

8 5. See the left inset drawing. Identify the two Frame Spacers (79). Open the included packet of grease, and apply grease to both sides of both Frame Spacers. Then, identify the outer side of each Frame Spacer. Hold a Frame Spacer (79) between the Right Upright (78) and the Lift Frame (65), with the outer side of the Frame Spacer facing the Right [...]

9 7. Have a second person hold the console assem- bly near the Right Upright (78). Connect the wire harness on the console assem- bly to the Upright Wire (74) as shown in the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERL [...]

10 70 9. Set the Left Handrail (69) and the Right Handrail (71) on a level surface. Attach the Handrails (69, 71) to the Handrail Bracket (70) with four 1/4" x 1 1/2" Bolts (3) and four 1/4" Nuts (4). See the lower drawing. Make sure that the Nuts sit inside the indi- cated square holes in the Handrails. Start all four Bolts, and the[...]

11 1 1. Hold the handrail assembly near the console assembly . Connect the wire harness extending from the handrail assembly to the wire har- ness extending from the console assembly . See the inset drawing in step 7. The conn ector s should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT C[...]

12 16. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see page 21). To protect the oor or carpet, place a mat under the treadmill. 15. Orient the Latch Housing (76) so that the la[...]

13 OPERA TION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD Use a Surge Suppressor Y our treadmill, like other electronic equipment, can be damaged by sudden voltage changes in your home’s power . V oltage surges, spikes, and noise interfer- ence can result from weather conditions or from other appliances being turned on or off. T o decrease the r[...]

14 ETGG39608 (GGTL39608) FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. When you select the manual mode of the console, you can change the speed and incline of the treadmill with the touch of a button. As you exercise, the console will display continuous exercise feedback.[...]

15 HOW TO TURN ON THE POWER IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 13). Next, locate the power switch on the treadmill frame near [...]

16 4. Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline increase and decrease buttons or one of the numbered Quick Incline buttons. Each time you press one of the Incline buttons, the incline will gradually adjust to the selected incline setting. 5. Follow your progress with the displays. When[...]

17 HOW TO USE A PRESET APPLICATION 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 15. 2. Select a preset application. To select a preset ap- plication, press the Apps button repeatedly until the number of the desired application ap- pears in the display. When you select an application, the maximum speed and incline setting[...]

18 THE INFORMATION MODE The console features an information mode that keeps track of treadmill usage information and allows you to select a unit of measurement for the console. You can also turn on and turn off the display demo mode. To select the information mode, insert the key into the console while holding down the Stop button. Then, release th[...]

19 HOW TO FOLD THE TREADMILL To avoid damaging the treadmill, a djust the incline to the lowest position before you fold the treadmill. Then, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame rmly in the location shown by the arrow be[...]

20 Most treadmill problems can be solved by follow- ing the simple steps below . Find the symptom that applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. SYMPTOM: The power does not turn on a. Make sure that the power cord is plugged into a surge suppressor and that the surge suppressor is p[...]

21 SYMPTOM: The walking belt slows when walked on a. Use only a surge suppressor that meets all of the specifications described on page 13. b. If the walking belt is overtightened, treadmill per- formance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key , turn both idler roller screws[...]

22 EXERCISE GUIDELINES These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember , proper nutrition and adequate rest are essential for successful results. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system[...]

23 Key No. Qty . Description Key No. Qty . Description Note: Specications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated. 1 2 3/8" x 2 1/2" Bolt 2 4 5/16" x 3/4" Screw 3 6 1/4" x 1 1/2" Bolt 4 4 1/4" Nut[...]

24 20 46 33 43 18 49 54 36 15 41 27 19 19 12 34 57 20 59 60 12 61 20 34 55 37 41 40 45 42 15 34 34 44 39 38 38 58 12 22 22 47 50 12 12 30 28 17 52 53 51 48 17 28 42 56 14 27 27 27 27 27 27 27 33 20 20 12 30 18 40 31 31 20 20 EXPLODED DRA WING A Model No. WL TL39712.0 R0712A[...]

25 24 62 23 29 13 65 26 25 63 13 33 33 64 23 29 68 66 7 12 67 20 20 20 20 EXPLODED DRA WING B Model No. WL TL39712.0 R0712A[...]

26 74 12 78 76 77 80 79 81 20 10 1 80 79 1 10 85 9 8 81 20 81 20 84 8 83 83 13 81 20 13 83 84 83 8 7 82 82 69 75 71 70 72 6 1 1 6 1 1 2 2 5 5 2 5 2 7 9 8 7 7 7 3 4 3 4 5 73 74 86 12 21 21 EXPLODED DRA WING C Model No. WL TL39712.0 R0712A[...]

27 87 35 35 35 35 35 35 35 35 35 89 7 35 94 93 16 35 35 35 7 7 7 7 35 35 91 91 92 35 35 90 3 88 7 32 31 1 1 EXPLODED DRA WING D Model No. WL TL39712.0 R0712A[...]

Part No. 336331 R0712A Printed in USA © 2012 ICON IP, Inc. ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The drive motor is warranted for ve (5) years from the date of purchase. Parts and labor are warranted for ninety (90) days from the[...]