Xerox CUSTOMER TIPS 7425/7428/7435 manuale d’uso

Xerox Multifunction Devices Customer Tips PDL Reference Guide for the WorkCentre 7425/7428/7435 dc09cc0453 June 10, 2009 …for the use r Accessing Extended Features Overview This document applies to the This document enables you to access the extended features of the WorkCentre 7425/7428/7435 in environ ments that do not have a custom print driver[...]

PCL This WorkCentre supports PCL5e and PCL XL emulations that ena ble the features liste d in the following table. Feature Description Job Name The value for Job Name is stored for p rinting on the banner page. Custom Paper Size Customer designated pa per size on whi ch to print a j ob. Media Size The size of media on whi ch to print a job. Media S[...]

PCL/PJL Implementation The following table contain s the PCL fea t ure co mmands and shows the syntax require d to use the feature. After the table are examples of how to use the se co mmands and examples of a PCL file. Feature Implementation Values Job Name @PJL SET JOBNAME = " jobname-string " Where jobnam e-string is a maximum of 32 ch[...]

Feature Implementation Values JPOST = Postcard (100 x 148mm) JPOSTD = Postcard (148 x 200mm) POSTCARD = Postcard (4 x 6") 50X70 = 5 x 7" TYOUKEI3 = Envelope (120 x 235mm) COM10 = No. 10 Envelope (4.1 x 9.5”) MONARCH = Monarch Envelope (3.9 x 7.5”) DL = DL Envelope (110 x 220mm) C5 = C5 Envelope (162 x 229mm) <ESC>&l int A Wh[...]

Feature Implementation Values Media Source @PJL SET MEDIASOURCE = value Where value is one of the following: TRAY1 : Feed from paper tray1 TRAY2 : Tray2 TRAY3 : Tray3 TRAY4 : Tray4 TRAY5 : Tray5 (Bypass) <ESC>&l int H Where int is one of the following: 0 : Feed paper from default tray 4 : Tray1 1 : Tray2 5 : Tray3 8 : Tray4 20 = Auto 2 or[...]

Feature Implementation Values Punch @PJL SET PUNCH = value1 @PJL SET JOBATTR = ”@PNHN = value2 ” Where value1 is one of the followin g: TOP RIGHT LEFT BOTTOM NONE Where value2 is one of the followin g: TWO: 2 holes THREE: 3 holes FOUR: 4 holes Folding @PJL SET JOBATTR = "@FOLD = value1" Where value1 is one of the followin g: BIFOLDINS[...]

Feature Implementation Values <ESC>&l int X Where int is: 1-999 @PJL SET DUP LEX = value1 Where value1 is one of th e following: OFF: simplex Simplex <ESC>&l int s Where int is one of the following: 0: simplex @PJL SET DUP LEX = value1 @PJL SET BINDING = value2 Where value1 is one of the followin g: ON: duplex Where value2 is on[...]

Feature Implementation Values Job Based Accounting Or Auditron @PJL SET JOBATTR = "@JOAU = string1 " @PJL SET JOBATTR = "@JOAP = string2 " @PJL SET JOBATTR = "@DAID = string3 " Where string1 is a maximum of 32 characters (ASCII characters in the range 20h - 7E H only) as job owner (Capital characte r & small charac[...]

Sample PJL Headers This section contains examples of the se commands in use. Example 1 Simple Print <ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL COMMENT Beginning PCL Job<CR><LF> @PJL SET OUTBIN=MAINTRAY<CR><LF> @PJL SET QTY=1<CR><LF> @PJL SET RESOLUTION=600<CR><LF> @PJL SET JOBAT[...]

Example 6 Finishing Options (Bi-Folding(single pa ge)) <ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET OUTBIN=BOOKLETTRAY<CR><LF> @PJL SET FINISH=NONE<CR><LF> @PJL SET STAPLE=NONE <CR><LF> @PJL SET JOBATTR="@FOLD=BIFOLDINSIDE"<CR><LF> @PJL SET JOBATTR="@BKSG=LEFT&q[...]

PCL/PJL Feature Dependencies/Caveats  All PJL commands must be in t he first 2,500 bytes of the job.  To combine printer escape comm ands (not including PJL comma nd s): - The first two characters afte r the <esc> MUST be the same. - All alpha characters MUST be lowercase, except the final terminatin g character. - The commands are read[...]

dc09cc0453 Font Name PCL Escape Command Courier Italic <esc>(<esc>(s1p12v1s0b 4 099T Courier Bold Italic <esc>(<esc>(s1p12v1s3b 4 099T Garamond Antiqua <esc>(<esc>(s1p12v0s0b 4 197T Garamond Halbfett <esc>(<esc>(s1p12v0s3b4 197T Garamond Kursiv <esc>(<esc>(s1p12v1s0b 4 197T Garamond Kursiv[...]

Font Name PCL Escape Command ITC Bookman Demi <esc>(<esc>(s1p12v0s2b 24623T ITC Bookman Demi Italic <esc>(<esc>(s1p12v1s2b 24623T Helvetica Narrow <esc>(<esc>(s1p12v4s0b 24580T Helvetica Narrow Oblique <esc>(<esc>(s1p12v5s0b 24580T Helvetica Narrow Bold <esc>(<esc>(s1p12v4s3b 24580T Helvet[...]

dc09cc0453 Customer Support Page 14 PostScript This WorkCe ntre support s PS 3 commands that enable the features listed in the followin g table. Feature Description Media Size This command specifies the size of media on whi ch to print the job. Media Direction This command spec ifie s the edge of the input medium that will enter the printing engine[...]

dc09cc0453 Customer Support Page 15 Feature Description Punch This command indicates hole pun ch es for a print job on a device with hole punch capability. Booklet This comman d enables you to print documents as small booklets. If available on your printer, you can also h ave your job folded or stapled. Interleaving Paper (Transparency Separator) I[...]

dc09cc0453 Customer Support Page 16 PostScript Implementation The following table contains the PostScript command s and shows the syntax requ ired to use the feature. Following the table are examples of com mands and a PS file. For more details about PostScri pt commands, refer to the PostScript Language Refere nce Manual, Third Edition , ISBN 0-20[...]

dc09cc0453 Customer Support Page 17 Feature Implementation Values [649 918] = C4 Envelope (229 x 324mm) [459 649] = C5 Envelope (162 x 229mm) Media Direction <</LeadingE dge int >> setpagedevice Where int is one of the following: 0 = Short Edge; top of canonical page 1 = Long Edge; right side of canoni cal page 2 = Short Edge; bottom of[...]

dc09cc0453 Customer Support Page 18 Feature Implementation Values user 3 = Custom 3 user 4 = Custom 4 user 5 = Custom 5 holed = Hole Punched letterhead = Letterhead preprinted = Pre-Printed other = Other thin = Lightweight thick1 = Heavyweight (HW) (106 - 169g/m2) thick1 side2 = HW Reload (106 - 169g/m2) thick2 = Extra HW (X-HW) (170 - 256g/m2) thi[...]

dc09cc0453 Customer Support Page 19 Feature Implementation Values thick2 side2[B] = Extra HW (X-HW) B Reload thick2 side2[C] = Extra HW (X-H W) C Reload thick2 side2[S] = Extra HW (X-HW) S Reload Media Type <</MediaType ( string )>> setpagedevice Where string is any value o r null*. (MediaType will not affect tray selection.) Media Sele[...]

dc09cc0453 Customer Support Page 20 Feature Implementation Values Halftone Screen Selection <</PostRenderingEnhance true /PostRenderingEnhanceDetails << /Type 32 /EngineScree n int >> >> setpagedevice Where int is one of the following: 0 = for text, graphics screen 1 = for photograph screen 2 = most suitable screen* Output L[...]

dc09cc0453 Customer Support Page 21 Feature Implementation Values Punch (w/ C- Finisher) <</Punch int1 /PunchDetails << /Type 5 /Position int2 /Numholes int3 >> >> setpagedevice Where int1 is one of the following: 0 = Do not punch* 3 = Do punch by set unit. Where int2 is one of the following: 0 = topside 1 = bottom side 2 = [...]

dc09cc0453 Customer Support Page 22 Feature Implementation Values Process Color Model <</ProcessColorModel name >> setpagedevice Where name is one of the followin g: /DeviceGray /DeviceRGB (with Separations true) /DeviceCMYK /DeviceCMY (with Separations tru e) /DeviceRGBK (with Separations true) RGB Correction <</DeviceRenderingIn[...]

dc09cc0453 Customer Support Page 23 Feature Implementation Values Brightness <</DeviceRenderi ngInfo << /Type 26 /Brightness int >> >> setp agedevice Where int is one of the following: 5 = Bright (+5) 4 = Bright (+4) 3 = Bright (+3) 2 = Bright (+2) 0 = Normal* -1 = Dark (-1) -2 = Dark (-2) -3 = Dark (-3) -4 = Dark (-4) -5 = [...]

dc09cc0453 Customer Support Page 24 Sample PostScript Headers Example 1 Header for Simple Print %!PS Example 2 Header for Finishing (Letter paper , duplex, 10 copies with collation, st apling with lef t-upper single and finisher tray for output bin) %!PS << /DeferredMediaSelection true >> setpagedevice <</PageSize [612 792]>>[...]

dc09cc0453 Customer Support Page 25 PostScript Fonts The following PostScript fonts are re sident with Adobe interpreter. Font Name PostScript Font Name Albertus /AlbertusMT Albertus Italic /AlbertusMT-Italic Albertus Light /AlbertusMT-Light Antique Olive Roman /AntiqueOlive-Roman Antique Olive Italic /AntiqueOlive-Italic Antique Olive Bold /Antiqu[...]

dc09cc0453 Customer Support Page 26 Font Name PostScript Font Name Gill Sans /GillSans Gill Sans Italic /GillSans-Italic Gill Sans Bold /GillSans-Bold Gill Sans Bold Italic /GillSans-BoldItalic Gill Sans Light /GillSans-Light Gill Sans Light Italic /GillSans-LightItalic Gill Sans Extra Bold /GillSans-ExtraBold Gill Sans Condensed /GillSans-Condense[...]

dc09cc0453 Customer Support Page 27 Font Name PostScript Font Name New Century Schoolboo k Bold /NewCenturySchlb k-Bol d New Century Schoolboo k Bold Italic /NewCenturySchlb k-Bol dItalic NewYork /NewYork OCR-B Letterpress M /OCRB LetM Optima Roman /Optima Optima Italic /Optima-Italic Optima Bold /Optima-Bold Optima Bold Italic /Optima-BoldItalic O[...]

Additional Information Xerox Customer Support wel comes feedback on all documentation - send feedback via e-m ail to: USA.DSSC.Doc.Feedba ck@mc.usa.xerox.com . You can reach Xerox Cust omer Support at 1-800-821 -2797 (USA), TTY 1-800-855-2880 or at http://www.xerox.com . Other Tips about Xerox multifunction device s are available at the following U[...]