Yamaha IPA8200 manuale d’uso

IPA8200 Owner’s Manual 1 IT RU ES FR DE EN English Deutsch F rançais Español Italiano[...]

IPA8200 Owner’s Manual 2 The abov e warning is located on the top of the unit. Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to con[...]

IPA8200 Owner’s Manual 3 PRECAUTIONS PLEASE READ CAREFULL Y BEFORE PROCEEDING * Please keep this man ual in a saf e place for future ref erence. W ARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precauti[...]

IPA8200 Owner’s Manual 4 • Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum. •T urn off the power before connecting speakers, and use only the speaker cables for connecting speakers to the speaker jacks. Failure to do so can [...]

IPA8200 Owner’s Manual 5 Intr oduction Thank you for purchasing the Y amaha IP A8200 pow er amplifier . In order to tak e full advantage of the IP A8200’ s functionality and to ensure trou- ble-free operation, please read this o wner’ s manual carefully before use. After you have read the manual, k eep it in a safe place for reference when n[...]

IPA8200 Owner’s Manual 6 Introduction ............................................................................................................. 5 Features .............................................................................................................. 5 Precautions when rack-mounting the unit ....................................[...]

IPA8200 Owner’s Manual 7 Contr ols and Functions q PO WER switch and indicator T urns power to the unit on or of f. The indicator lights green when the po wer is on. w PRO TECT indicator When the protection system is acti v e, the indicator lights red. When this is lit, the amplifier or po wer supply is auto- matically shut do wn, and no sound w[...]

IPA8200 Owner’s Manual 8 Controls and Functions q INPUT connectors These are balanced input connectors. The included Eurob- lock connectors can be used to make connections here. w SPEAKERS connectors These are barrier strip type speaker output connectors. • If using BRIDGE mode, connect the speak ers to the “+” pin of channels A/C/E/G and t[...]

IPA8200 Owner’s Manual 9 Mode settings Speakers can be connected to the IP A8200 using the f ollowing thr ee mode settings. The total load impedance of the speakers that can be connected will depend on the mode setting. Do not use a setup that has a lo wer impedance than the minimum values shown belo w . If the rear panel MODE switch is set to ST[...]

IPA8200 Owner’s Manual 10 Connections Please be sure to use the supplied Eur oblock connectors. If y ou lose them, contact y our near est Y amaha dealer . 1. If the wire insertion ports are closed, turn the scre ws on top of the connector counterclockwise to open the ports. 2. Insert the wires into the appropriate ports, follo wing the indication[...]

IPA8200 Owner’s Manual 11 Tr oubleshooting Indicator(s) P ossible cause Remedy Protection cir cuit CLIP indicator is lit. Output e xceeds 100 W (8 Ω ) or 200 W (4 Ω ). Lower the input le vel. Limiter circuit will operate to protect the power amp and power supply . PRO TECT indi- cator is lit. Speaker output connec- tor is shor ted. Check whet[...]

IPA8200 Owner’s Manual 57 Specifications General Specifications • Half power = 3dB belo w rated po wer • 0dBu = 0.775Vrms Output P ow er 4 Ω per channel 200W x 8 8 Ω per channel 100W x 8 1kHz, THD+N=1% 8 Ω / BRIDGE 400W x 4 20Hz-20kHz, THD+N=1% 4 Ω per channel 180W x 8 8 Ω per channel 90W x 8 8 Ω / BRIDGE 360W x 4 1kHz, 20ms Bur[...]

IPA8200 Owner’s Manual 58 Specifications Bloc k Diagram Dimensions BA A TTENUA TOR A TTENUA TOR HA MUTE MUTE GAIN GAIN HA MODE MODE STEREO BRIDGE STEREO BRIDGE P ARALLEL STEREO BRIDGE P ARALLEL P ARALLEL + – G CH A, C, E, G + – G CH B, D, F , H HPF HPF Comp. HPF Fc=55Hz HPF Fc=20Hz HPF Fc=55Hz HPF Fc=20Hz Comp. Clip Level Detect Level Detect [...]

IPA8200 Owner’s Manual 59 Specifications Current Draw 1/8 power is typical of prog ram material with occasional clipping. Refer to these figures f or most applications . 1/3 power represents prog ram material with e xtremely heavy clipping. T est signal: Pink Noise , bandwidth limited from 22Hz to 22kHz 1W = 0.860kcal/h, 1BTU = 0.252kcal Note th[...]

IPA8200 Owner’s Manual 60 MEMO[...]

IPA8200 Owner’s Manual 61 Information f or Users on Collection and Disposal of Old Equipment This symbol on the products, pac kaging, and/or accompanying documents means that used electrical and electronic products should not be mix ed with general household w aste. For proper treatment, reco v ery and recycling of old products, please take them [...]

IPA8200 Owner’s Manual 62 Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo Este símbolo en los productos, embalaje , y/o documentación que se acompañe significa que los productos electrónicos y eléc- tricos usados no deben ser mezclados con desechos hogareños corrientes. Pa ra el tratamiento , recuperació[...]

IPA8200 Owner’s Manual 63 HEAD OFFICE Y amaha Corporation, Pro A udio & Digital Musical Instrument Division Nakazaw a-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 T el: +81-53-460-2441 P A24 For details of products, please contact your nearest Y amaha representativ e or the authorized distrib utor listed below . Die Einzelheiten zu Produkten [...]

Y amaha Pro Audio global web site: http://www .yamahapr oaudio.com/ Y amaha Manual Library http://www .yamaha.co.jp/man ual/ U .R.G., Pro Audio & Digital Musical Instrument Division, Y amaha Cor poration © 2009 Y amaha Cor poration 001PO-03C0[...]