Yeoman YM-CKWDGR-L manuale d’uso

Solid Fuel Cooker INST ALLA TION & OPERA TING INSTRUCTIONS Models YM-CKWDWH-R / YM-CKWDBL-R YM-CKWDGR-R / YM-CKWDPB-R / YM-CKWDWH-L YM-CKWDBL-L / YM-CKWDGR-L / YM-CKWDPB-L F or use in Great Britain and Eire This product is suitable for use in the stated countries. T o install the product in other countries it is essential to obtain translated i[...]

2 Commissioning Data 3 T echnical Specification 4 SITE REQUIREMENTS Solid Fuel Cooker Dimensions 5 Hearth Dimensions 5 Walls adjacent to Hearths 5 PRE-INST ALLA TION CHECKS Flue or Chimney 7 Additional V entilation 8 INST ALLA TION INSTRUCTIONS Installing the Cooker 9 Commissioning 10 USER INSTRUCTIONS General 11 Care of the Cooker 11 Using the sto[...]

3 FOR YOUR RECORDS YEOMAN DEALER APPLIANCE W AS PURCHASED FROM Name: .................................................................................................................................................................................................. Address: .............................................................................[...]

TECHNICAL SPECIFICA TION Model 3 Solid fuel cooker Nominal heat output All fuels KW 7.5 Flue draught @ nominal heat output All fuels m m Wg 1.00 inch Wg 0.04 Flue outlet size To p mm 125 inch 5 Rear mm 125 inch 5 Side mm 125 inch 5 Weight Kg 120 Recommended fuels Wood Seasoned wood (less than 20% moisture content) Solid fuel Briquetted smokeless fu[...]

5 SOLID FUEL COOKER DIMENSIONS (Right hand cooker shown) Additional information covering the installation the Solid fuel cooker may be found in the following British Standard: BS8303. Before installation of this product please read these instructions fully . It is very important to also understand the requirements of the UK Building Regulations (En[...]

6 SITE REQUIREMENTS HEARTH DIMENSIONS The appliance must stand on a constructional hearth with the minimum dimensions as shown in diagram below . If you are fitting the appliance into an existing hearth setting check that it complies with the current construction regulations and is the minimum sizes shown. If you have no e xisting fireplace or chim[...]

SITE REQUIREMENTS 7 Location of hearth or Solid fuel cooker Solid, non combustible material Thickness (W) height (A) Where the hearth abuts a wall and the solid fuel cooker is not more than 50mm from the wall 200mm A t least 300mm above the solid fuel cooker and 1200mm above the hearth(Use the largest value) Where the hearth abuts a wall and the ap[...]

8 I t is important that adequate ventilation exists and the Flue or C himney system that is to be used is in good working condition. Products of combustion that enter the room could be a serious health risk. Before installation of this product the Flue or Chimney system and V entilation requirements are inspected by a competent person, and passed a[...]

9 Model Solid fuel cooker Additional ventilation mm 2 1375 cm 2 13.75 sq. inch 2.125 2.2 Extractor fans or cooker hoods should not be placed in the same room or space as the appliance. 2.3 If any of these checks reveal problems do not proceed with the fitting of the appliance until they have been rectified. PRE-INST ALLA TION CHECKS 1.11 Where a he[...]

10 1.5 Decide it the installation is to be top, rear or side flue exit, and fit and seal, with fire cement, the flue collar and blanking plate to suit. The flue collar attaches to the cooker backplate or top plate with fixings supplied. The blanking plates are fixed to the unused flue outlets with fixings supplied. 1.6 Lift the cooker into position[...]

11 1 .15 Connect a flue pipe 612mm long (Stovax part no 4501 ( 5” pipe)) by inserting it into the flue spigot and sealing using fire cement. 2. COMMISSIONING 2.1 Before lighting the Solid fuel cooker , check the following items: a ) Fit of internal parts (firegrate, firebricks, baffles, a nd log retainer). b) Door alignment, seals and catch opera[...]

INST ALLA TION INSTRUCTIONS 12 2.9 Record serial number in user instructions . This number will be required when ordering spare parts and making warranty claims. 2.10 Give the copy of the user instructions to the customer .[...]

USER INSTRUCTIONS 13 1. GENERAL 1 .1 This cook er is designed for domestic use and should only be used for this purpose, and in accordance with the manufacturers operating instructions. 1.2 It should be installed by a competent installer (HET AS registered UK only), in accordance with all local regulations, including those referring to national and[...]

USER INSTRUCTIONS 14 3 .3 During this time the cooker may give off some u npleasant odours, and we recommend that you keep the room well ventilated during this period to avoid a build-up of fumes. 4. BURNING WOOD 4.1 Open the air control to maximum . 4.2 Open flue by-pass control using tool. 4.3 Place some pieces of firelighter or dry crumpled pape[...]

USER INSTRUCTIONS 15 5 .5 As the fire becomes established adjust the a ir control t o g ive the oven temperature you require. 5.6 Close flue by-pass control. 5.7 Before re -fuelling the cooker it is advisable to first de- ash the firebed, using the riddling grate system or a suitable poker . Do not use bare hands to operate the r iddling system or [...]

USER INSTRUCTIONS 16 9.2 De -ash the firebed using the operating tool to riddle the grate and clear ash. 9.3 As heat can remain in the ash for a long period after use care must be taken when removing and carrying the full ashpan. W e suggest that the ashpan be carried using gloved hands, or the ash is placed directly in to a Stovax ash caddie. 9.4 [...]

MAINTENANCE and SER VICING 17 1. GENERAL CLEANING 1 .1 W e would recommend that your Solid fuel cook er be cleaned fully on a regular basis, according to the level of use. A ttention should be given to cleaning the flueways and removing ash. Regular cleaning and preventive maintenance will help give many years of safe use. 1.2 Flue ways under the o[...]

MAINTENANCE and SER VICING 18 4 .9 Lightly oil the door catch mechanism and hinge pins. A void getting oil on to the door seals, glass and enamel. 4.10 T o refresh painted finishes it is possible to re -paint using Stovax Thermolac paint. 4.11 Use only genuine Stovax replacement parts to keep your appliance in safe and efficient working order . Y o[...]

NOTES 19[...]

YEOMAN STOVES A division of Stovax Ltd F alcon Road, Sowton Industrial Estate, Exeter , EX2 7LF T el 01392 . 474500 F ax 01392 . 219932 www .yeoman- stoves.co.uk Email: yeoman@stovax.com[...]