Zanussi TL 553 C manuale d’uso

INSTRUCTIONS MANUAL W ASHING MACHINE TL 553 C 129 6771 05 Z Z Z Z Z ANUSSI ANUSSI ANUSSI ANUSSI ANUSSI[...]

2 CONTENTS For the user Safety instructions 4/5 Description of the appliance 6 Use of your appliance 7 Operating instructions 8/ 9 Programme chart 1 0 Hints & Tips 11- 1 3 Cleaning and maintenance 1 4 If something doesn't work 15/16 Guarantee 17 Service 17 For the installer Technical information 1 8 Installation Unpacking 18 Installation 1[...]

3 You must read the whole of this instruction book before you use the appliance. Follow the advice carefully. Keep the book for future reference. If you sell or give away the appliance, make sure that the book is passed to the new owner. The following warnings are provided in the interest of overall safety. You must read them before the appliance i[...]

4 Safeties Lid : your washing machine is equipped with a safety avoiding the switching of the appliance when the flapdoors of the drum are opened ; the closure of the lid is so impossible. An electromechanic safety prohibits the opening of the lid when the washing machine works and 2 minutes after the end of the programme. Washing motor : in case o[...]

5 DESCRIPTION OF THE APPLIANCE Detergent dispenser Symbols ( ) Washing powder or liquid detergent for programmes with pre-wash (1). ( ) Washing powder or liquid detergent for the main wash (2). ( ) Bleach compartment (3). ( ) Liquid additives (fabric softener and conditioner...) (4). ( $ ) Liquid detergent. Control panel 1 2 3 4 Lid Handle for open[...]

6 USE OF Y OUR APPLIANCE The contr ol panel 1 ON/OFF pushbutton " " Press the ON/OFF pushbutton, the programme starts : the control lamp lights on. 2 Contr ol lamp The control lamp lights on when the appliance is working (on/off pushbutton " " pressed). It lights off when the on/off pushbutton " " is pressed out. 3 Col[...]

7 OPERA TING INSTR UCTIONS 1. Place the laundr y in the drum lift up the lid of the machine. open the drum with your two hands by pressing the button A and the two flapdoors till they disengage. introduce the laundry into the drum ; close the drum and the lid of the machine. Be careful : before closing the lid of your ma- chine, make sure that the [...]

8 6. Select the pr ogramme Choose the programme according to the nature and the degree of soil of the laundry. Turn the programme selector clockwise to select the chosen programme. 7. Starting of the programme The ON/OFF pushbutton " " enables to switch on your machine. The control lamp lights on and the programme begins. 8. At the end of[...]

9 PR OGRAMMES CHAR T Programmes description T emperatures (°C) W ater consumption in liters Time in minutes White + White White Shor t prog ramme Rinsing Spinning Synthetics + Synthetics Delicate W ool Rinsing Drain 90 90 60 40 60 60 40 30 95 79 79 79 62 0 72 58 58 63 42 0 Detergent dispensers to use Pr ogrammes f or cotton/linen and for synthetic[...]

10 HINTS AND TIPS W ashing hints You are advised not to leave your laundry too long, especially when damp. Damp laundry produces moult and unpleasant smells. Moult stains cannot be removed. Sor t y our laundr y . Study carefully the chart in this booklet explaining the symbols used on clothes labels (see page 13). The following points are particula[...]

11 To remove paint stains, for example, use a vola- tile substance such as turpentine: in this case, you should wait for it to dry completely before washing. The manufacturer of your washing machine is not responsible for any damage deriving from the use of volatile, inflammable or toxic substances. At the end of the washing Damp laundry should be [...]

12 W ash code symbols These symbols appear on fabric label, in order to help you choose the best way to treat your laundry. Strong wash WASH Delicate wash Max. wash temperature 95 ° C Max. wash temperature 60 ° C Max. wash temperature 40 ° C Max. wash temperature 30 ° C Hand wash Do not wash at all BLEACHING Bleach in cold water Do not bleach I[...]

13 fig.4 fig.5 Bodyw ork The outside or the machine can be cleaned with warm water and a neutral non-abrasive household detergent. Wipe with clean water and dry after cleaning. Important : do not use methylated spirit, diluents or similar products. It is advisable, from time to time, to carry out a complete cycle without a washing load, adding a de[...]

14 The wash results are not as usual The wash results are not as usual The wash results are not as usual The wash results are not as usual The wash results are not as usual The washing cycle is very much too The washing cycle is very much too The washing cycle is very much too The washing cycle is very much too The washing cycle is very much too lo[...]

15 The machine vibrates or is too noisy The machine empties as it fills There is water on the floor Softener detergent flows out the overflow orifice IF SOMETHING DOESN'T W ORK (continue) Check that : all the transit bolts and packing have been removed. all the feet resting firmly on the ground, the lock nuts have been secrured. the machine do[...]

16 If y ou hav e unab le to identify or solve the prob lem, consult our ser vicing depar tment. Before telephoning, make a note of the mak e, model and date of purchase of your machine : the ser vice depar tment will require this inf or mation. Data plate Y ou will find these inf or mations on the data plate of the appliance. It is placed on the ba[...]

17 FOR THE INST ALLER T echnical inf ormation Dimensions height with panel 895 mm height without panel 850 mm width 397 mm depth 600 mm Power supply voltage / frequency 230 V / 50 Hz Total power absorbed 2300 W (10 A) Heater rating 1950 W Water pressure minimum 50 kPa (0,5 kg/cm 2 ) maximum 800 kPa (8 kg/cm 2 ) Maximum load cotton 5 kg synthetics 2[...]

18 Installation The floor must be clean and dry, free from floor polish and other greasy substances, so that the machine does not slide about. Do not use any grease as lubrification. Installation on deep pile carpets and floor coverings with foam backings is not recommended, as the stability of the machine is no longer guaranteed. If the installati[...]

19 W ater connection Connect the water inlet hose to a cold water tap with a 3/4" gas threaded orifice, after having inserted the rugger sealing washer into the hose collar. If the water connection is made onto new pipes or onto pipes which have not been used for a long time, it is advisable to run off a certain amount of water before connecti[...]

129 6771 05[...]