Zanussi ZHC 95 ALU manuale d’uso

C OOKER HOOD ZHC 95 AL U INSTRUCTION BOOKLET[...]

IMPORT ANT SAFETY INFORMA TION These warnings are provided in the interests of your safety . Ensure that you understand them all before installing or using this appliance. Y our safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Installation • Any installation wor[...]

For the User Important Safety Information 2 Y our Appliance 4 Operating Instructions 4 Maintenance and Cleaning 5 Something Not Working 6 Service and Spare Parts 6 Customer Care Department 6 Service Force Centres 7 Guarantee Conditions 9 CONTENTS 3 For the Installer T echnical Information 10 Electrical Connections 10 Installing the Cooker Hood 1 1[...]

YOUR APPLIANCE OPERA TING INSTRUCTIONS This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam . T o obtain the best performance it is advisable to switch on the hood a few minutes before you start cooking and leave it running for approximately 15 minutes after you finish cooking. Cooker Hood Controls L[...]

MAINTENANCE AND CLEANING Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply . Metal grease filters It is necessary to wash these filters at least every two months with warm water to which a little washing up liquid has been added. Their compact size means that they can be washed in the dishwasher . Replace[...]

SOMETHING NOT WORKING 6 If, having carried out these instructions carefully , your cooker hood fails to work properly please carry out the following checks. If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model number and serial number . Please note that it will be necessary to provide proof of [...]

7[...]

8[...]

GUARANTEE CONDITIONS 9 Standard Guarantee Conditions We, Zanussi, undertake that if within 24 months of the date of the purchase this Zanussi built-in appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, m[...]

INST ALLA TION INSTRUCTIONS 10 It is dangerous to alter the specifications or attempt to modify this product in any way . T echnical Information DIMENSIONS Height (CANOPY) 100 mm Height (CHIMNEY) 450-850 mm Width (CANOPY) 898 mm Width (CHIMNEY) 200 - 270 mm Depth 507 mm Gross weight 24,5 kg Net weight 20 kg DUCTING OUTLET DIAMETER Ø120 mm ELECTRIC[...]

INST ALLING THE COOKER HOOD 11 Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installation must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood. Installation Requirements Befor[...]

INST ALLA TION INSTRUCTIONS 12 Clearance Heights The cooker hood is designed to be fitted over a cooking appliance at the clearance heights stated, providing the maximum output of the appliance beneath does not exceed the maximums quoted in the T echnical Specifications. If the output of the appliance below the cooker hood exceeds the maximum outpu[...]

INST ALLA TION INSTRUCTIONS 13 The versatility of the ducting fan unit on this hood enables it to be installed in one of four different ways: - Air outlet directed upwards (re-circulation fitting only). - Air outlet directed towards the wall (ducting fitting only). - Air outlet directed to the right or left (ducting fitting only).For correct instal[...]

INST ALLA TION INSTRUCTIONS 14 Installation of the hood canopy C Drilling the wall a) Using the cardboard template provided, mark on the wall the centres of holes 1 for fixing of the hood canopy C .The centre of hole 2 for fixing the chimney , ( a ) air outlet directed upwards or towards the wall, ( b-c ) air outlet to the right or left hand side, [...]

INST ALLA TION INSTRUCTIONS 15 Fitting the hood canopy C to the wall a) Remove the lower grill and the active charcoal filter if present (see paragraph on maintenance). b ) Fit the support rod B using the two screws K (3,5x9,5)provided. c) Hook the hood canopy C to the eye bolts O fixed in holes 1 . d) Adjust the support rod B so that it pushes aga[...]

INST ALLA TION INSTRUCTIONS Drilling the shelves: a) Using the cardboard template provided, and taking hole “ B ”as a point of reference, drill the shelves along the central axis to allow the passage of the chimney . The chimney must be inserted into the shelves before it is fixed to the hood canopy C . b) When installing the re-circulation ver[...]

INST ALLA TION INSTRUCTIONS - Remove the plug from the upper part of the ducting fan unit, as it is not possible to insert the flange F with the plug in place. - Fit the flange F Ø120 or 150 mm,replace the plug. · Air outlet directed to the right or left hand side. - Remove the four screws fastening the plastic frame, as shown in figure . - Fit t[...]

INST ALLA TION INSTRUCTIONS Ducting or re-circulation fitting Ducting fitting. This is possible for all forms of installation: a) Connect the air outlet to the external ducting system. b) Remove the activated charcoal filter (if there is one)inside the hood canopy (see Maintenance). Re-circulation fitting This is only possible with the air outlet d[...]

[...]

4329478 03 - 010910 © Electrolux Household Appliances Limited 2001[...]