Zanussi ZWH 6125 manuale d’uso

GB User manual 2 Washing machine ZWH 6125[...]

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Control Panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Personalisation _ _ _[...]

• Always be su re, that the re is no wate r leakage from hoses and their connections after the installation. • If the applianc e is installed in a location s ubject to frost, please read th e “dangers of freezi ng” chapter. • Any plumbing work required to insta ll this appliance should be carried out by a q ualified plumber or com- petent[...]

Product description 1 Detergent dispenser drawer 2 Control pa nel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet 1 2 3 4 5 6 Detergent dispenser drawer Compartment for deterge n t used fo r prewash an d soak phase or f or stain remove r used during the stain action pha se (if avail able). The p rewash and soa k deter- gent is a[...]

1 2 3 4 5 6 7 8 10 9 1 Programme sel ector dial 2 SPIN button 3 OPTIONS button 4 PREWASH button 5 EASY IRON button 6 EXTRA RINSE button 7 START/PAUSE button 8 DELAY START button 9 DOOR LO CKED pilot light 10 Display Table of symbols = Rinse hold = Child Safety Lock 1-8 Programme selector dial, spin speed b utton and available options Programme Sele[...]

rinses in some programmes. On other prog rammes (e.g. cotton) the maxim um spin speed is reduc ed automati- cally. Extra Rinse This appli ance is desig ned for saving energy. If it nece s- sary to rinse the laundry using an extra quantity of w ater (extra rinse), selec t this option. Some additional rinse s will be performed. This optio n is recomm[...]

Washing programmes Programme Maximum and Minimum Temper ature - Cycle Description - Maximum Spi n Speed - Maximum Fabric s Load - Type of Laundry Options Detergent Compart- ment COTTONS 90° - Cold 1) Main wash - Rinses Maximum spi n speed at 1200 r pm Max. load 7 kg - Reduced load 3. 5 kg 2) White and colo ured cotton (normally soiled items). SPIN[...]

Programme Maximum and Minimum Temper ature - Cycle Description - Maximum Spi n Speed - Maximum Fabric s Load - Type of Laundry Options Detergent Compart- ment JEANS 40° Main wash - Rinses Maximum spi n speed at 1200 r pm Max. load 3.5 kg With this programme it is poss ible to wash items like pants, shirts or jacket s in denim and al so jersey real[...]

Programme Maximum and Minimum Temper ature - Cycle Description - Maximum Spi n Speed - Maximum Fabric s Load - Type of Laundry Options Detergent Compart- ment DRAIN Draining of water Max. lo ad7 kg For emptying out the wate r of the last rinse in progra mmes with theRinse Hold option selected . SPIN Drain a nd long s pin Maximum spi n speed at 1200[...]

not recent since the ce llulose structure will alre ady have been damaged and the fabric tends to hole. Mould stains: treat with bleach, rins e well (whites and fast coloureds o nly). Grass: soap lightly and treat with bleach (white s and fast coloureds o nly). Ball point pen and glue: moisten with acetone 1) , lay the garment on a s oft clot h and[...]

Personalisation Acousti c signals The machine is provided with an acoustic device, which sounds in the following cases: • at the end of the cycle • if there is a fault. By pressi ng the 4 and 5 buttons simultaneously for about 6 seconds , the acoustic signal is deactiva ted (except if there is a fault). B y pressin g these 2 bu ttons again , th[...]

When these buttons are pr essed, the co rrespondin g pilot lights illumina te. When they ar e pressed again, the pilot lights go out. If an incorrect option is selecte d, the inte- grated red pilot light of the button 7 flashes 3 times and the message Err is displayed. For the compatibility among the washing programmes and the opt ions see chap ter[...]

1. Turn the programme select or dial to . 2. Select the drainin g or spinning programm e. 3. Redu ce the spin spee d if needed, b y pressing t he relevant b utton. 4. Press b utton 7 . At the end of th e programme, the doo r is released and can be opened. Turn the programme selector di al to to switch the machine off. Remove the laundry from the dr[...]

Pull out th e emergency emptying hose, place it in the contai ner and remove its cap. When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water whe n removing the cover. Remove any objects from the pump impeller by ro- tating it. Put the cap back on the emergency emptying hose and place[...]

• When you int end to star t the machin e up again, make sure that the room temperature is a bove 0°C. Emergency emptying out If the water is not dis charged , proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; • if necessa ry, wait until the wate r has cooled dow n; • open the [...]

Problem Possible cau se/Solution The machine does not fill: The water tap is closed. • Open the w ater tap. The inlet hose is squashed or k inked. • Check the i nlet hose connection. The filter in the inlet hose is blocked. • Clean the wate r inlet hose filter. The door is not proper ly closed. • Close the door firmly. The machine does not [...]

Problem Possible cau se/Solution The door will not op en: The programme is still running. • Wait the end of washin g cycle. The door lock has not been released. • Wait until the pilot light 9 goes off. There is water in the drum. • Select drain or spin program me to empty out the w ater. The machine vi brates is noisy: The transit bolts and p[...]

Technical data Dimensions Width Height Depth 60 cm 85 cm 63 cm Electric al connectio n Voltage - Overall power - Fuse Information on the electrica l connection is given on the ra ting plate, on the inner edge of the appliance door. Water supply pressure Minimum Maximum 0,05 MPa 0,8 MPa Maximum Load Cotton 7 kg Spin Speed Maximum 1200 rpm Consumptio[...]

After removing all the packaging, carefully lay machine on it's bac k to re- move the polystyrene base from the bottom. Remove the power supply cable and th e hoses from the hose holders on the rear of the ap pliance. Unscrew the three bolts . Slide out th e relevant pla s- tic spa cers. Open the porthole an d re- move the polystyrene block fi[...]

The other end of the inle t ho se which c onnects to the appliance can be turned a s showed in the p icture. Do not place the inlet hos e downwards. Angle the hose to the left or right depending on the position of your water tap. Set the hose correctly by loos ening the ring nut. After positioning the inle t hose , be sure to tighten the ring nut a[...]

21[...]

22[...]

23[...]

www.zanuss i.com 132952630-00-202 009[...]