Zanussi ZWS 165 W manuale d’uso

WASHING MACHINE USER MANUAL ZWS165W[...]

THE CONTENTS SECTION 1:BEFORE USING • Safety warnings • Recommendations SECTION 2:INSTALLATION • Removal of transportation screws • Adjustment of feet • Electrical connection • Water supply connection • Water drain connection SECTION 3:TECHNICAL SPECIFICATION S SECTION 4:CONTROL PANEL • Start/Pause button • Function indicator ligh[...]

SECTION 1:BEFORE USING SAFETY WARNINGS • Do not use a multiple socket or extension cord. • Do not insert a plug with damaged or b roken cord int o the socket. • If the cord is damaged it should be replace d by the manufacturer or appointed service agent in order to avoid a haza rd. • Never remove the plug from the so cket by pulling from th[...]

• If you will not use your machine for a long time, unplug your machine, close the water supply and leave the door open in order to keep th e inside of the machine dry and for prevention from un pleasant odour. • As a result of the quality control procedures, a certai n amount of water may remain in your machine. Thi s is not harmful for your m[...]

• You can adjust the balance of your machine from its f eet. • First, loosen the plastic adjustment nut. • Adjust by rotating the feet upwards or downwards. • After the balance has been reached, tighten the plastic adjustment nut again by rotating it upwards. • Never put cartons, woode n blocks or similar materials under the machine to ba[...]

• Water pressure of 1-10 bars from your tap will enable your machine to work more efficiently.(1 bar pressure mean s water flow of more than 8 liters in 1 minute from a fully opened tap). • After connections are completed, che ck for the non-leakage of the connection joints by turning on your tap completely. • Be sure that water inlet hoses a[...]

SECTION 3:TECHNICAL SPECIFICATIONS ZWS165W Maximum dry laundry capacit y (kg) 5 Recommended loadi ng (kg) 4,5 Height (cm) 85 Width (cm) 59,6 Depth (cm) 44 Maximum spin cycle ( rpm ) 600 (*) Maximum spin cycles depend on the model you’ve chosen 1 2 3 4 5 6 7 1-Upper tray 5-Handle 2-Detergent drawer 6-Filter cover 3-Control panel 7-Kickplate 4-Door[...]

SECTION 4:CONTROL PANEL 1 2 3 4 5 6 7 8 1-Detergent drawer 5-Program knob 2-Start/pause light 6-Start/pause button 3-Function indicator lights 7-Function buttons 4-Program ready light 8-Program end light 7[...]

START/PAUSE BUTTON U sed to start a selected program or pause during running. WARNING! It is required for the program knob to be brought to O(off) position before selecting the progra m or changing a continuin g program. FUNCTION INDICATOR LIGHTS When the start/pause button or any function button is pressed,t he corresponding light turns on.Th e li[...]

If you do not want your sensitive clothes to be spinned or you want them to be spinned sens itively, turn the program knob to O (off) position. Bring the program kno b on one of the draining or spinning programs you desi re and press the start/pause button. If the program you ha ve selected is a drain program , your machine will draining the water [...]

WARNING! F unctions vary depending on the model you have chosen.If you forgot to use additional function and your machi ne starts to wash push the additional function button if the indicator light is on. Additional function will be activated.If the indicator light is not on,additional function will not be activated. PROGRAM KNOB With the program kn[...]

O Stop 1 Cotton 90 ˚ 2 Cotton 60 ˚ (Prewas h) 3 Cotton 60 ˚ 4 Cotton 40 ˚ 5 Eco wash 6 Cotton 30 ˚ 7 Quick wash 8 Cotton cold 9 Mix wash 10 Synthetic 60 ˚ 11 Baby wash 12 Synthetic 40 ˚ 13 Sport clothes 14 Synthetic cold 15 Curtain wash 16 Delicate 30 ˚ 17 Delicate cold 21 Rinsing 18 Hand wash 19 Wool 30 ˚ 22 Spinning 20 Wool cold 23 Drain[...]

• Pull the textiles like trousers,k nitted fabric,t-shirt and sweat shi rt inside out. • Wash your small clothes li ke socks and handkerchiefs in a wa shing bag. Wash up tol 90 ˚ C Wash up to 60 ˚ C Wash up to 30 ˚ C Not washable in w a s h i n g m a c h i n e Placement of the clothes into the machine • Open the door of your machine. • F[...]

• You can use fluid detergents in all progra ms without pre-washing. For this, mount the fluid detergent level plate in the second compartment of the detergent drawer and arrang e the amount of fluid detergent according to the levels on this plate. RUNNING THE MACHINE fluid detergent level plate Program selection and features Select the program a[...]

• The door will be unlocked i n approximately two minutes after the program ends.You can open the doo r by pulling the handle of the door towards yourself and take out your clothes. • After you unload your clothes leave the door open to dry the interior of your machine. • Unplug your machine. • Close the water tap. WARNING! If the power is [...]

MAX DRY LOAD CAPACITY (kg) PROGRAM DETERGENT COMPART. ADDITIONAL FUNCTION BUTTON ZWS165W TYPE OF LAUNDRY EXPLANATIONS 1-COTTON 90 ˚ 2 5 Dirty, boil, cotton a nd linen textile 2-COTTON 60 ˚ (PREWASH) 1+2 5 Very dirty, cotton, coloured and linen textile 3-COTTON 60 ˚ 2 5 Dirty, cotton, colour ed and linen textile 4-COTTON 40 ˚ 2 5 Slightly dirty,[...]

MAX DRY LOAD CAPACITY (kg) PROGRAM DETERGENT COMPART. ADDITIONAL FUNCTION BUTTON ZWS165W TYPE OF LAUNDRY EXPLANATIONS 13-SPORT CLOTHES 2 3 Sport clothes All sport clothes and jeans 14-SYNTHETIC COLD 2 3 Slightly dirty, sy nthetic or synthetic mixture sensitive laundry.Washed w ithout heating the tap w ater. Nylon socks, blouse 15-CURTAIN WASH 1+2 2[...]

• Remove the water inlet hose. • Remove the filters found on the water inlet valves by usin g a pincer and wash thoroughly with a brush. • Clean the filters of the water inle t hoses located o n the tap side by removing manually together with the seal. • After you clean the filters, you can fit them the same way as you h ave removed. PUMP F[...]

WARNING! Danger of being scalded! Since the water inside the pump maybe hot, wait for it to cool. DETERGENT DRAWER Detergents may form a sediment in your detergent dra wer or in housing of the detergent drawer in time. To clean the sediment, pull out the detergent drawer from time to time.To pull out the detergentdrawer: • Pull the detergent draw[...]

SIPHON PLUG Pull out the detrgent drawer. Remove the siphon plug and clean the residues of the softener thoroughly. Fit the cleaned siphon plug in its location. Check if it placed properly. THE CABINET Clean the exterior surface of the cabine t of your machine with lukewarm water and a cleaning substan ce that will not irritate the cabinet. After r[...]

SECTION 7:PRACTICAL INFORMATION Alcoholic beverages: The stain point, should first be washed with cold water, than should be wiped with glycerine and water and be rinsed with water mixed with vinegar. Shoe Polish: The stain should be slightly scratched without ruining the cloth, rubbed with detergent and rinsed. In case it is not eliminated, it sho[...]

Mould : Mould stains should be clea ned as soon as possi ble. The stain should be washed with deterg ent, and if it does not disappear, it should be wiped with ox ygenated water (in proportion of 3%). Ink: Hold the stained area under cold water and wait until the inky water completely runs off. Then rub with water diluted with lemon juice and deter[...]

FAILURE PROBABLE CAUSE METHODS OF ELIMINATION Insert the plug into the socket. It is unplugged. Your fuse is defected. Change your fuse. The electric power is off. Check the electric power. Start/pause button has not been pressed. Press the start/pause button. The program knob is in O(off) status. Bring the program knob on the desired status. Your [...]

FAILURE PROBABLE CAUSE METHODS OF ELIMINATION There is a small amount of clothes in the device. It does not prevent operation of the machine. Do not exceed the recommended quantity of clothes and spread your clothes in the machine in a well- balanced manner. Excessive amount of clothes are filled in the machine or the clothes are not placed in a we[...]

FAILURE PROBABLE CAUSE METHODS OF ELIMINATION Clothes exceeding the maximum capacity has been filled in your machine. Put the clothes in your machine in a manner not to exceed its maximum capacity. Use the amount of detergent according to the declaration of the detergent producer. Your water may be hard. The washing result is not good. Distribution[...]

FAILURE PROBABLE CAUSE METHODS OF ELIMINATION The unbalanced load control system will try to distribute your clothes in a homogenous manner. After your clothes are distributed, passage to spining process will be realized.In the next washing process,pla ce your clothes into the machine in a well- balanced manner. No failure. The unbalanced load cont[...]

FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE Turn on the tap to the end.Water may be cut, check it.If the problem is still continuing,your machine will automatically stop after a while.Unplug your machine, turn off the tap and apply to the nearest authorized service. The water level in your machine is below heater. The pre[...]

FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE Shut down your machine and unplug. Turn off your tap and appl y to the nearest authorized service. The heater of your machine or the heat sensor has failed. The start/pause light and program end light blink. Err 05 Shut down your machine and unplug. Turn off the tap and apply to[...]

SECTION 10: INTERNAT IONAL WASHING SIGNS Washing temparature. Do not wash (hand wash) Lukewarm iron. Medium hot iron. Do not tumble dry. Hot iron. Do not iron. Hang to dry. Drip dry. Dry flat. Do not bleach. Handy to bleach. All of these are dry cleaning symbols. The letters are to instruct the cleaner what type of solvent to be used. Garments bear[...]