Zanussi ZWS 281 manuale d’uso

EN User manual Washing Machine ZWS 281[...]

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Technical information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Hints an[...]

Water connection • Do not connect the appliance with old hoses already used. Only use new hoses. • Make sure not to cause damage to the water hoses. • Do not connect the appliance to new pipes or pipes not used for a long time. Let the water flow for some mi- nutes, then connect the inlet hose. • The first time you use the appliance, make s[...]

Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 10 bar (1 MPa) Water supply 1) Cold water Maximum load Cotto n 5 kg Spin speed Maximum 800 rpm 1) Connect the water inlet hose to a water tap with a 3/4' ' thread. Product description 1 2 3 4 5 6 7 12 8 9 10 11 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Drain pu[...]

Control panel 1 3 4 5 2 6 7 8 9 1 Programme knob 2 Start button 3 Programme phase indicator 4 Easy iron button 5 Extra rinse button 6 Rinse hold button 7 Prewash button 8 Spin button 9 Delay Star button Programme knob 1 Turn this knob to set a programme. Start/Pause button 2 Press this button to start a programme. Programme phase indicators 3 Indic[...]

The set of this function increases the programme duration. Spin button 8 Press this button to: • Decrease the maximum speed of the spin phase of the programme. • Activ ate the ‘No Spin’ func tion . Set this function to cancel all spin phases. The appliance does not spin the laundry. Delay start button 9 Press this button to delay the start [...]

Programme Temper atu re Type of load and soil Weight of load Programme phases Possible functions Wool 40° – Cold Machi ne wash abl e wool . Hand washa ble wool and delicate fabrics with «hand washing» care symbol. max. 1 kg Wash Rinses Spin phase at 800 rpm Handwash 30° C Hand washable delicate fabrics with «hand washing» care symbol. max. [...]

Standard programmes for the Energy Label consumption values The cotton 60 °C economy and cotton 40 °C economy are the standard cotton programmes for normally soiled cot- ton laundry. They are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumption for washing th[...]

Water hardness table Level Type Water hardness °dH °T.H. mmol/l Clarke 1 soft 0-7 0-15 0-1.5 0-9 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 Before first use 1. To activate the drain system, put 2 litre of water in the main wash compartment of the detergent dis- penser. 2. Put a sm[...]

2 The detergent compartment for the washing phase. If you use a liquid detergent, put it immedi- ately before you start the programme. Liquid additives compartment (fabric condi- tioner, starch). Put the product in the compartment before you start the programme. Always obey the instructions that you find on the packaging of the detergent products. [...]

If the temperature and level of the water in the drum are too high, you cannot open the door. To open the appliance door: • Do the steps 1 and 2 again. • Wait for some minutes. • Make sure that no water is in the drum. At the end of the programme • The appliance stops automatically. • The start button indicator flashes or the End indicato[...]

Door seal Regularly examine the seal and remove all objects from the inner part. Detergent dispenser To clean the dispenser: • Press the lever and pull the dispenser out. • Remove the top part of the liquid additive com- partment. Clean all the parts wit h water. • Clean the dispenser re- cess with a brush. • Put back the dispenser in the r[...]

6. Remove fluff and ob- jects from the pump. 7. Make sure that the impeller of the pump can turn. If th is does not occur, contact the service centre. 1 2 8. Clean the filter under the water tap and put it back in the pump. Caution! Make sure that you tighten cor- rectly the filter to prevent leakages. 9. Close the drain pump door. Clean the inlet [...]

Troubleshooting The start of the appliance does not occur or it stops dur- ing operation. First try to find a solution to the problem (refer to the ta- ble). If not, contact the service centre. Warning! Deactivate the appliance before you do the checks. Problem Possible cause Possible solution The appliance does not start. The mains plug is not con[...]

Problem Possible cause Possi ble s olutio n The filter of the drain pump is blocked. Clean the filter of the drain pump. Refer to 'Care and cleaning'. Balance problems with the laundry load. Adjust manually the items in the tub and start the spin phase again. There is water on the floor. Leakages from the couplings of the water hoses. Mak[...]

Installation Unpacking 1 2 A 1. Use the gloves. With a scissor cut the straps and with a cutter remove the external film. Do not to discard the plastic cover (A). 2. Remove the polystyrene packaging materials. 3. Remove the internal film. 4. Open the door and remove all the items from the drum. 16[...]

5. Put the front piece on the floor behind the appli- ance. Carefully put down the appliance with the rear side on it. Make sure not to damage the ho- ses. 1 2 6. Remove the polystyrene protection from the bot- tom. A 7. Install the plastic cover (A), removed from the top of the packaging, to the bottom of the appliance. Remove the adhesive strip a[...]

10. Replace the plastic spacers with the large plastic caps. You can find these large caps in the user manual bag. Warning! Remove all the packaging and the transit bolts before you install the appliance. We recommend that you keep the packaging and the transit bolts for when you move the appliance. Positioning and lev elling • Install the applia[...]

• On the edge of a sink. Make sure that the plastic guide cannot move when the appliance drains. Attach the guide to the water tap or the wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be venti- lated [...]

www.zanussi.com/shop 155219130-A-202011[...]