ZyXEL Communications 480 manuale d’uso

Prestige 480 Dual BRI ISDN Router User’s Guide Version 2.42 Dec. 1999[...]

Prestige 480 Dual BRI ISDN Router ii[...]

Prestige 480 Dual BRI ISDN Route r iii Prestige 480 ISDN Router Copyright Copyright © 02.08.1999 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mech[...]

Prestige 480 Dual BRI ISDN Router iv Declaration of Conformity We, the Manufacturer/Importer ZyXEL Communications Services GmbH. Thaliastrasse 125a/2/2/4 A - 1160 Vienna - AUSTRIA de clare that the product Prestige 480 is in conformity with (Reference to the specification under which conformity is declared) Standard Standard Item Version • EN 550[...]

Prestige 480 Dual BRI ISDN Route r v • EN 61000 - 4 - 8 Power Magnetic Measurement 1993 • EN61000 - 4 - 11 Voltage dips, short interruptions and voltage variations immunity tests 1994[...]

Prestige 480 Dual BRI ISDN Router vi ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure d[...]

Prestige 480 Dual BRI ISDN Route r vii Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwid e, in one of the following ways: Method Location E - MAIL – Support/ Sales Telephone / Fax Web Site / FTP Site Regular Mail support@zyxel.com.tw support@europ e.zyxe[...]

[...]

Prestige 480 Dual BRI ISDN Router Table of Contents ix Ta ble of Contents Declaration of Conformity ...................................................................................................... iv Table of Contents .................................................................................................................. ix List of [...]

Prestige 480 Dual BRI ISDN Router Table of Contents x 2.8 Changing the System Password ................................................................................... 2 - 8 2.9 Resetting the Prestige ................................................................................................. 2 - 9 2.10 General Setup .......................[...]

Prestige 480 Dual BRI ISDN Route r Table of Contents xi 3.5.1 Basics ........................................................................................................................................................ 3 - 7 3.5.2 IP Alias Setup .....................................................................................................[...]

Prestige 480 Dual BRI ISDN Router Table of Contents xii Remote Node TCP/IP Configuration ..................................................................................... 5 - 1 5.1 LAN - to - LAN Application ............................................................................................... 5 - 1 5.2 Remote Node Setup ..............[...]

Prestige 480 Dual BRI ISDN Route r Table of Contents xiii Chapter 8 .............................................................................................................................. 8 - 1 Dial - in Server Configuration ................................................................................................. 8 - 1 8.1 Remote Acc[...]

Prestige 480 Dual BRI ISDN Router Table of Contents xiv 9.4.2 Remote Node Filters .............................................................................................................................. 9 - 16 9.4.3 Default Dial - in Filter .......................................................................................................[...]

Prestige 480 Dual BRI ISDN Route r Table of Contents xv 13.1 System Status ....................................................................................................... 13 - 2 13.1.1 System Information .......................................................................................................................... 13 - 6 13.1.2 C[...]

Prestige 480 Dual BRI ISDN Router Table of Contents xvi 14.2.3 Restore using TFTP .......................................................................................................................... 14 - 6 14.3 Firmware Update ................................................................................................... 14 - 7 14.3.1 Upl[...]

Prestige 480 Dual BRI ISDN Route r Table of Contents xvii[...]

[...]

Prestige 480 Dual BRI ISDN Router List of Figures xix List of Figures Figure 1 - 1 Internet Access Application ....................................................................................................................... 1 - 6 Figure 1 - 2 Internet Access Application ........................................................................[...]

Prestige 480 Dual BRI ISDN Router List of Figures xx Figure 3 - 4 Partition ed Logical Networks ..................................................................................................................... 3 - 8 Figure 3 - 5 IP Alias Example ....................................................................................................[...]

Prestige 480 Dual BRI ISDN Route r Lis t of Figures xxi Figure 8 - 9 Edit Dial - in - User for RAS ........................................................................................................................ 8 - 11 Figure 8 - 10 LAN 1 LAN - to - LAN Application ............................................................................[...]

Prestige 480 Dual BRI ISDN Router List of Figures xxii Figure 13 - 1 Menu 24 - System Maintenance ............................................................................................................ 13 - 1 Figure 13 - 2 Menu 24.1 - System Maintenance – Status ................................................................................[...]

Prestige 480 Dual BRI ISDN Route r Lis t of Figures xxiii Figure 14 - 9 Menu 24.7.1 - Uploading Router Firmware ........................................................................................ 14 - 9 Figure 14 - 10 Menu 24.7.2 - System Maintenance - Upload Router Configuration File ................................. 14 - 10 Figure 14 - 11 FT[...]

[...]

Prestige 480 Dual BRI ISDN Router List of Tables xxv List of Tables Table 2 - 1 LED Functions ............................................................................................................................................... 2 - 1 Table 2 - 2 Main Menu Commands ...........................................................................[...]

Prestige 480 Dual BRI ISDN Router List of Tables xxvi Table 9 - 3 Abbreviations used if Filter Type is GEN .................................................................................................. 9 - 6 Table 9 - 4 TCP/IP Filter Rule Men u Fields ..............................................................................................[...]

Prestige 480 Dual BRI ISDN Router Preface xxvii Preface About Your Router Congratulations on your purchase of the Prestige 480 dual BRI ISDN Router. Th e Prestige 480 is a high - performance router that offers a complete solution for your WAN (Wide Area Network) applications such as Internet access, multi - protocol LAN - to - LAN connections, tele[...]

Prestige 480 Dual BRI ISDN Router Preface xxviii For more information abou t the Prestige check the following sources: ♦ Prestige Support disk. ♦ Release notes for firmware upgrades and other information. These can be accessed through ZyXEL FTP server site and ZyXEL web Page. For ZyXEL support information see the Customer Support section in pag[...]

Prestige 480 Dual BRI ISDN Route r Prestige Scenarios xxix Prestige Scenarios Fo r fast access to example SMT menus to show you how to configure the Prestige for various scenarios go to the following sections SCENARIO GO TO SECTION To reset your Prestige 2.9 NetCAPI 2.12 DHC P 3.4 Internet Access 3.5 To configure SUA 3.7.2 IP Alias 3.5 Mega Bundle [...]

Prestige 480 Dual BRI ISDN Router Structure of the Manual xxx General Structure of this Manual Getting Started (Chapters 1 - 2) This helps you connect, install and setup your Prestige to operate on your network . The Internet (Chapter 3) This shows you how to configure your Prestige for Internet access. Advanced Applications (Chapters 4 - 8) This s[...]

Prestige 480 Dual BRI ISDN Route r Getting to know your Prestige 1 - 1 Chapter 1 Getting to Know Your Router This chapter describes the key features and applications of your Prestige. 1.1 Prestige 480 ISDN Router The Prestige 480 is a dual - line multi - protocol ISDN router. Th e Prestige is ideal for everything from Internet browsing or receiving[...]

Prestige 480 Dual BRI ISDN Router 1 - 2 Getting to know your Prestige User Account feature. The ability to partition physical network into logical network over the same Ethernet interface is referred to as IP Alias functionality. Dial - in Server The four B - channels and the dial - in capability make the Prestige a n ideal platform as a dial - in [...]

Prestige 480 Dual BRI ISDN Route r Getting to know your Prestige 1 - 3 IP Policy Routing Support The Prestige can now override the default routing behavior and forward packets based on the policies de fined by the network administrator. PPP Support The Prestige supports PPP (Point - to - Point Protocol) link layer protocol. PPP Multilink Support Th[...]

Prestige 480 Dual BRI ISDN Router 1 - 4 Getting to know your Prestige SMT The System Management Terminal (SMT) is a menu - driven interface t o configure your Prestige using either console port (through RS232 cable) connection or telnet (through LAN) connection. You can access the SMT from either a VT100 compatible terminal or a terminal emulation [...]

Prestige 480 Dual BRI ISDN Route r Getting to know your Prestige 1 - 5 Packet Filtering The Prestige supports packet filtering that stops leakage of private data to the outside world and controls access to undesirable lo cations. Call Control Your Prestige provides budget management for outgoing calls and maintains a blacklist for unreachable phone[...]

Prestige 480 Dual BRI ISDN Router 1 - 6 Getting to know your Prestige 1.3.1 Internet Access The Prestige is the ideal high - spe ed Internet access solution. Your Prestige supports the TCP/IP protocol that the Internet uses exclusively. It is also compatible with access servers manufactured by major vendors such as Cisco and Ascend. A typical Inter[...]

Prestige 480 Dual BRI ISDN Route r Getting to know your Prestige 1 - 7 the cost of a single account. Single User Account address mapping can also be used for other LAN to LAN connections. Intranet Application Small/M edium Office users can access the Internet via one ISDN BRI at speed up to 128Kbps even when the branch office users are connected re[...]

Prestige 480 Dual BRI ISDN Router 1 - 8 Getting to know your Prestige Figure 1 - 2 Internet Access Application[...]

Prestige 480 Dual BRI ISDN Route r Getting to know your Prestige 1 - 9 1.3.2 LAN - to - LAN Connection You can use the Prestige to connect two geographically dispersed networks at speeds of up to 256Kbps o ver two ISDN BRI lines. It incorporates PPP/MP (Point - to - Point Protocol/Multilink Protocol ) to bundle the B channels. The Prestige supports[...]

Prestige 480 Dual BRI ISDN Router 1 - 10 Getting to know your Prestige 1.3.3 Remote Access Server Your Prestige allows remote users to dial in and gain access to your LAN. This feature enables users that have workstations with remote access capabilities, e.g., Windows 95, to dial in to access the network resources without physically being in the of[...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 1 Chapter 2 Hardware Installation & Initial Setup This chapter shows you how to make the cable connections to your Prestige as well as set up your ISDN connection using the SMT. 2.1 Front Panel LEDs The LED indicators on the front panel indicate the router functional status [...]

Prestige 480 Dual BRI ISDN Router 2 - 2 Hardware Installation and Setup Field Description ISDN 1 & 2 LNK B1/B2 The LNK (Link) LED is on when the Prest ige is connected to an ISDN switch and the line has been successfully initialized; otherwise, it is off. The B1/B2 LED is on when the corresponding B Channel is in use. 2.2 Prestige 480 Rear Pane[...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 3 Step 1. Connecting the ISDN lin es Connect the Prestige to the ISDN network using the included ISDN (black) cable. Plug one end of the cable into the port labeled ISDN BRI and the other to the ISDN wall jack. Step 2. Connecting Ethernet to your Prestige Use a Unshielded Twiste[...]

Prestige 480 Dual BRI ISDN Router 2 - 4 Hardware Installation and Setup Note: You cannot ac cess the PNC if you use the RS232 cable. You must use only the Ethernet cable. 2.4 Additional Installation Requirements In addition to the contents of your package, there are other hardware and software requirements you need before you can install and use yo[...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 5 Figure 2 - 3 Power - On Display Step 2. En tering Password The login screen appears after you press [Enter], prompting you to enter the password, as shown next. For your first login, enter the default password 1234 . As you type the password, the screen displays a ( X ) for ea[...]

Prestige 480 Dual BRI ISDN Router 2 - 6 Hardware Installation and Setup Operation Press/<read> Description to YES then press [ENTER]. to a submenu. Move the cursor [Enter] or [Up]/[Down] arrow keys Within a menu, press [Enter] to move to the next field. You can also use the [Up]/[Down] arrow keys to move to the previous and the next field, re[...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 7 Figure 2 - 5 SMT Main Menu 2.7.1 System Management Terminal Interface Summary Table 2 - 3 Main Menu Summary # Menu Title Description 1 General Setup Use this menu to setup gen eral information. 2 ISDN Setup Use this menu to setup the ISDN. 3 Ethernet Setup Use this menu to set[...]

Prestige 480 Dual BRI ISDN Router 2 - 8 Hardware Installation and Setup 24 System Maintenance This menu provides system status, diagnostics, firmware upload, etc. 25 IP Policy Rout ing This menu allows you to configure Routing Policies, 99 Exit To exit from SMT and return to the blank screen. 2.8 Changing the System Password The first thing your sh[...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 9 When the Menu 23.1 - System Security - Change Password appears, as shown in the next figure , type in your existing default system password, i.e., 1234, and press [ Enter]. Figure 2 - 7 Menu 23.1 - Syst em Security - Change Password Step 3. Enter your new system password and p[...]

Prestige 480 Dual BRI ISDN Router 2 - 10 Hardware Installation and Setup Turn on the Prestige again. You should see the following scre en. Figure 2 - 8 Booting Up the Prestige When you see the message "Press Any key to enter Debug Mode within 3 seconds", press any key to enter debug mode. Follow the procedure below to upload the configura[...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 11[...]

Prestige 480 Dual BRI ISDN Router 2 - 12 Hardware Installation and Setup 2.10 General Setup Menu 1 - General Setup contains administrative and system - related information. To enter Menu 1 and fill in the required in formation, follow these steps: Step 1. Enter 1 in the Main Menu to open Menu 1 – General Setup . Step 2. The Menu 1 - General Setup[...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 13 2.11 European ISDN Setup Menus Menu 2 is for you t o enter the information about your ISDN lines. Please note that the Prestige only accepts digits in phone number fields; please do not include ‘ - ‘ or spaces in these fields. Figure 2 - 10 Menu 2 – ISDN Setup From Menu[...]

Prestige 480 Dual BRI ISDN Router 2 - 14 Hardware Installation and Setup Table 2 - 5 Menu 2.1 – ISDN Basic Setup Field Description. ISDN Line Refers to ISDN line 1 or line 2 setup that you selected in Menu 2 - ISDN Setup Switch Type This field is fixed as DSS - 1 for European switches. In general, this will be Switch/Switch (the default). If you [...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 15 Figure 2 - 12 Menu 2.1.1 - ISDN Advanced Setup[...]

Prestige 480 Dual BRI ISDN Router 2 - 16 Hardware Installation and Setup Table 2 - 6 Menu 2.1.1 - ISDN Advanced Setup Field Description Calling Line Indication The Calling Line Indication , or Caller ID, governs whether the other party can see your number when you call. If set to Enable , the Prestige sends the caller ID and the party you call can [...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 17 Figure 2 - 13 Loopback Test 2.12 NetCAPI Setup 2.12.1 Basics NetCAPI is ZyXEL's implementation of CAPI (Common ISDN Application Program Interface) cap abilities over a network. It runs over DCP (Device Control Protocol) developed by RVS - COM . NetCAPI can be used for ap[...]

Prestige 480 Dual BRI ISDN Router 2 - 18 Hardware Installation and Setup Using ISDN - DCP, the Prestige acts as a DCP server. By default, the Prestige listens for DCP messages on TCP port number 2578 (the Internet - assigned number for RVS - COM DCP). When the Prestige receives a DCP message from a DCP client i.e., a workstation, the Prestige proce[...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 19 Figure 2 - 14 Configuration Example Before entering any configurations, you must install the CAPI driver (RVS - CE) and communication program such as RVS - COM Lite on your workstation. 2.13.1 I nstalling the CAPI driver and Communication Software [ Note: Please uninstall pre[...]

Prestige 480 Dual BRI ISDN Router 2 - 20 Hardware Installation and Setup Figure 2 - 15 Menu 2.2 - NetCAPI Setup Step 2. S et the fields in the above menu according to the following description . Table 2 - 7 NetCAPI Setup Fields Field Description Active This field allows you to enable or disable NetCAPI. Press the [Spacebar] to toggle between Yes an[...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 21[...]

Prestige 480 Dual BRI ISDN Router 2 - 22 Hardware Installation and Setup 2.14 Ethernet Setup This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup . From the Main Menu, enter 3 to open Menu 3 . Figure 2 - 16 Menu 3 - Ethernet Se tup 2.14.1 General Ethernet Setup This menu allows you to specify the filter sets that you[...]

Prestige 480 Dual BRI ISDN Route r Hardware Installation and Setup 2 - 23 Figure 2 - 17 General Ethernet Setup If you need to define filters, please read Chapter 9 - Filter Set Configuration , then return to this menu to define the filter sets.[...]

[...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 1 Chapter 3 Internet Access This chapter shows you how to configure the LAN as well as the WAN of your Prestige for Internet access. 3.1 Factory Ethernet Defaults The Ethernet parameters of the Prestige are preset in the factory with the followi ng values: 1. IP address of 192.168.1.1 with subn[...]

Prestige 480 Dual BRI ISDN Router 3 - 2 Internet Access Figure 3 - 1 General Setup To edit Menu 1 , enter 1 in the Main Menu to select General Setup and press [ Enter]. 3.3 TCP/IP Parameters 3.3.1 IP Address and Subnet Mask Similar to the houses on a street that share a common street name, the machines on a LAN share one common network number, also[...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 3 3.3.2 RIP Setup RIP (Routing Information Protocol) allows a router to exchange routing information with other routers. The RIP Direction field controls the sending and receiving of RIP packets. When set to Both , the Prestige will broadcast it s routing table periodically and incorporate the [...]

Prestige 480 Dual BRI ISDN Router 3 - 4 Internet Access DNS Server Address DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa, e.g., the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely important because without it, a user must know the IP address of a machine before s/he can [...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 5 3.4 TCP/IP Ethernet Setup and DHCP You will now use Menu 3.2 to configure your Prestige for TCP/IP . To edit Menu 3.2, select the menu option Ethernet Setup in the Main Menu. When Menu 3 appears, select the submenu option TCP/IP and DHCP Setup and press [Enter]. The screen now displays Menu 3[...]

Prestige 480 Dual BRI ISDN Router 3 - 6 Internet Access Table 3 - 1 DHCP E thernet Setup Menu Fields Field Description Example DHCP This field enables/disables the DHCP server. If it is set to Server , your Prestige will act as a DHCP server. If set to None , the DHCP server will be disabled. If set to Relay, the Prestige acts as a surrogate DHCP s[...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 7 Field Description Example third IP Alias. When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel. 3.5 IP Alias 3.5.1 Basics The P480 supports three logical LAN interface via its single physica[...]

Prestige 480 Dual BRI ISDN Router 3 - 8 Internet Access Figure 3 - 4 Partitioned Logical Networks For example, in a school you can partition the single physical network into administration network, teachers network and students network as shown next. Figure 3 - 5 IP Alias Example 3.5.2 IP Alias Setup Prestige LAN 1 IP Address (Menu 3.2) LAN 2 IP Al[...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 9 You must use Menu 3.2 to configure the first network and move the cursor to Edit IP Alias field and toggle the space bar to choose Yes and press [Enter] to configure th e second and third network. Figure 3 - 6 Menu 3.2 - TCP/IP and DHCP Ethernet Setup Pressing [Enter] opens Menu 3.2.1 - IP Al[...]

Prestige 480 Dual BRI ISDN Router 3 - 10 Internet Access IP Alias Setup Menu Fields Field Description Example IP Alias Choose Yes to configure the LAN network for the Prestige. Yes IP Address Enter th e IP address of your Prestige in dotted decimal notation 192.168.2.1 IP Subnet Mask Your Prestige will automatically calculate the subnet mask based [...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 11 3.6 Internet Access Configuration Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified se tup for one of the remote nodes that you can access in Menu 11. Before you configure your Prestige for Internet access, you need to collect your Inte[...]

Prestige 480 Dual BRI ISDN Router 3 - 12 Internet Access Internet access. Figure 3 - 8 Menu 4 – Internet Access Setup[...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 13 Table 3 - 4 Internet Access Setup Menu Fields Field Description ISP’s Name Ent er the name of your Internet Service Provider, e.g., myISP. This information is for identification purposes only. Pri Phone and Sec Phone Number Both the Primary and the Secondary Phone number refer to the numbe[...]

Prestige 480 Dual BRI ISDN Router 3 - 14 Internet Access 3.7 Single User Account Typically, if there are m ultiple users on the LAN wanting to concurrently access the Internet, you will have to lease a block of legal, or globally unique, IP addresses from the ISP. The Single User Account (SUA ) feature allows you to have the same benefits as having[...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 15 The IP address for the SUA can be either fixed or dynamically assigned when a call is connected. In addition, you can designate servers using Menu 15 , e.g., a web server and a telnet server, on your local network and make them accessible to the outside world. For more in formation on settin[...]

Prestige 480 Dual BRI ISDN Router 3 - 16 Internet Access 3.7.2 Single User Account Configuration The steps for configuring your Prestige for Single User Account are identical to the conventional Internet access with the exception that you need to fil l in two extra fields in Menu 4 - Internet Access Setup, as shown next . Figure 3 - 10 Menu 4 – I[...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 17 At this point, your Prestige will ask if you wish to test the Internet connection. If you select Yes , the Prestige will call the ISP and test the configuration. If the test fails, note the error messages on the screen and take the appropriate troubleshooting steps. 3.8 Mega Bundle or Multip[...]

Prestige 480 Dual BRI ISDN Router 3 - 18 Internet Access 3.8.2 ISP Remote Node and Supplementary Remote Node The pre vious ZyNOS versions supported only one ISP account. That remote node is called as the “ISP remote node”. Now in ZyNOS v2.42, you can setup other ISP accounts and this is called as “supplementary remote node”. You can have se[...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 19 5. In Menu 11.2 , set Max. Channel s= 3 or Max. Channels = 4 6. Save the configuration. Step 2. Configure a supplementary remote node. 1. Setup a remote node in Menu 11 . 2. Set Edit PPP Options = Yes and then press [Enter]. You will enter Menu 11.2 3. Set Mega Bundle = Suppl ementary . Retu[...]

Prestige 480 Dual BRI ISDN Router 3 - 20 Internet Access 3.10 Configuring Backup ISP Accounts If you have more than one ISP account, you can configure the secondary ISP as a backup. You can switch to the backup ISP in the event that the primary ISP is out of service. The SUA feature can be enabled for all these accounts. 3.10.1 Configure a Backup I[...]

Prestige 480 Dual BRI ISDN Route r Internet Access 3 - 21 You will now be able to access the Internet through the backup ISP Remote Node.[...]

[...]

Prestige 480 Dual BRI ISDN Route r Remote Node Configuration 4 - 1 Chapter 4 Remote Node Configuration This chapter covers the parameters that are protocol independent. The p rotocol - dependent configuration (TCP/IP) is covered in the next chapter. A remote node is required for placing calls to a remote gateway. A remote node represents both the r[...]

Prestige 480 Dual BRI ISDN Router 4 - 2 Remote Node Configuration Figure 4 - 1 Menu 11 – Remote Node Setup When Menu 11.1. - Remote Node Profile appears, fill in the fields as described in the table below to define this remote profile. The Remote Node Profile Menu Fields table shows how to configure the Remote Node Menu. Menu 11 - Remote Node Set[...]

Prestige 480 Dual BRI ISDN Route r Remote Node Configuration 4 - 3 Figure 4 - 2 Menu 11.1 Remote Node Profile Table 4 - 1 Remote Node Profile Menu Fields Field Description Options Rem Node Name This is a required field [?]. Enter a descriptive name for the remote node, for example, Corp. This field can be up t o eight characters. This name must be [...]

Prestige 480 Dual BRI ISDN Router 4 - 4 Remote Node Configuration This field determines whether or not your Prestige will call back after receiving a call from this remote node. If this option is enabled, your Prestige will disconnect the initial call from this node and call it back at the Outgoing Primary Phone Number (see below). Outgoing: My Log[...]

Prestige 480 Dual BRI ISDN Route r Remote Node Configuration 4 - 5 and this remote node. When set to Leased , the Allocated Budget and Period do not apply. Leased Carrier Access Code This field allows you to select a specific carrier to take advantage of discount telephone rates. Enter the carriers access code. Nailed - up Connection This field spe[...]

Prestige 480 Dual BRI ISDN Router 4 - 6 Remote Node Configuration successful authentication, please make sure that you specify the correct authentication protocol when connecting to such an implementation. 4.1.4 PPP Multilink The Prestige uses the PPP Multilink Protoc ol (PPP/MP ) to bundle multiple links in a single connection to boost the effecti[...]

Prestige 480 Dual BRI ISDN Route r Remote Node Configuration 4 - 7 Table 4 - 2 BTR v MTR for BOD BTR & MTR Setting No. of channel(s) used Max No. of channel(s) used Bandwidth on demand BTR = 64, MTR = 64 1 1 Off BTR = 64, MTR = 128 1 2 On BTR = 128, MTR = 128 2 2 Off BTR = 256, MTR = 256 4 4 On The Min. Channels and Max. Channels allows you to [...]

Prestige 480 Dual BRI ISDN Router 4 - 8 Remote Node Configuration 4.1.6 Editing PPP Options To edit the remote node PPP Options, move the cursor to the Edit PPP Options field in Menu 11.1 - Remote Node Profile , and use the space bar to select Yes . Press [Enter] to open Menu 11.2 , as shown next. Figure 4 - 3 Menu 11.2 - Remote Node PPP Options Th[...]

Prestige 480 Dual BRI ISDN Route r Remote Node Configuration 4 - 9 Table 4 - 3 Remote Node PPP Options Menu Fields Field Description Option Standard PPP Encapsulation Select the CISCO PPP only when this remote node is a Cisco machine; otherwise, select the Standard PPP. CISCO PPP Compression You can turn on or off Stac Compression. The default for [...]

Prestige 480 Dual BRI ISDN Router 4 - 10 Remote Node Configuration 4.1.7 Remote Node Filter Move the cursor to the field Edit Filter Sets in Menu 11.1 , then press the space bar to toggle and set the value to YES . Press [ENTER] to open Menu 11.5 – Remote Node Filter . Use Menu 11.5 to specify the filter set(s) to apply to the incoming and o utgo[...]

Prestige 480 Dual BRI ISDN Route r Remote Node TCP/IP Configuration 5 - 1 Chapter 5 Remote Node TCP/IP Configuration This chapter shows you an example of LAN - to - LAN application an d explains how to configure the TCP/IP parameters of a remote node. 5.1 LAN - to - LAN Application A typical LAN - to - LAN application is to use your Prestige to con[...]

Prestige 480 Dual BRI ISDN Router 5 - 2 Remote Node TCP/IP Configuration For the branch office, you need to configure a remote node in order to dial out to the headquarters. Additionally, you may also need to def ine static routes if some services reside beyond the immediate remote LAN. LAN 1 Setup Figure 5 - 2 LAN 1 Setup LAN 2 Setup Menu 11.1 - R[...]

Prestige 480 Dual BRI ISDN Route r Remote Node TCP/IP Configuration 5 - 3 Figure 5 - 3 LAN 2 Setup 5.2 Remote Node S etup Follow the procedure in Chapter 4 - Remote Node Configuration to configure the protocol - independent parameters in Menu 11 - Remote Node Profile. For the TCP/IP parameters, follow the instructions below. If you are configuring [...]

Prestige 480 Dual BRI ISDN Router 5 - 4 Remote Node TCP/IP Configuration The following diagram explains the Sample IP Addresses to help you to un derstand the field of My Wan Addr in Menu 11.3. Figure 5 - 5 Sample IP Addresses for a TCPI/IP LAN - to - LAN Connection To configure the TCP/IP parameters of a remote node, first configure the two fields[...]

Prestige 480 Dual BRI ISDN Route r Remote Node TCP/IP Configuration 5 - 5 The next table s hows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer Options . Table 5 - 2 TCP/IP Remote Node Configuration Rem IP Address This will show the IP address you entered for this remote node in the previous menu. Rem IP Subnet Mask Enter the sub[...]

Prestige 480 Dual BRI ISDN Router 5 - 6 Remote Node TCP/IP Configuration 5.2.1 Static Route Setup Static routes tell the Prestige routing information that it cannot learn automatically through other means. This can arise in cases where RIP is disabled on the LAN or a remote network is beyond the one that is directly connected to a remote node. Figu[...]

Prestige 480 Dual BRI ISDN Route r Remote Node TCP/IP Configuration 5 - 7 To configure an IP sta tic route, use Menu 12 - IP Static Route Setup , as displayed next. Figure 5 - 7 Menu 12.1 – IP Static Route Setup Figure 5 - 8 Edit IP Static Route Setup Menu 12 - IP Static Route Setup 1. ________ 2. ________ 3. ________ 4. ________ 5. ________ 6. _[...]

Prestige 480 Dual BRI ISDN Router 5 - 8 Remote Node TCP/IP Configuration The f ollowing table describes the fields for Menu 12.1 – Edit IP Static Route Setup . Table 5 - 3 Edit IP Static Route Menu Fields Field Description Route Name Enter a descriptive name for this route. This is for identification purposes only. Active This field allows you to[...]

Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6 - 1 Chapter 6 IP X Configuration This chapter shows you how to configure the IPX parameters of the Prestige. 6.1 IPX Network Environment Novell bundles the protocol stack, the server software and routing functionality in their NetWare server products. So a NetWare server is not only a file or p[...]

Prestige 480 Dual BRI ISDN Router IPX Configuration 6 - 2 Although there are four frame types available on the Ethernet, you should configure as few frame types as possible on your NetWare server and use automatic frame detection on the clients to simplify management and to reduce network overhead. NetWare Server 6.1.3 External Network Number Each [...]

Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6 - 3 6.2 Prestige in an IPX Environment There are two scenarios in which your Prestige is deployed, depending on whether there is a NetWare server on the LAN or not, as depicted in the following diagram. Prestige in an IPX Environment 6.2.1 Prestige on LAN with Server If your Prestige is on a LA[...]

Prestige 480 Dual BRI ISDN Router IPX Configuration 6 - 4 6.2.2 Prestige on LAN without Server Each IPX network must ha ve a seed router. If you only have NetWare clients on your network, then you must configure the Prestige as a seed router and set up unique network numbers for each frame type enabled using the Ethernet Setup Menu. 6.3 IPX Spoofin[...]

Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6 - 5 Menu 3.3 - Novell IPX Ethernet Setup[...]

Prestige 480 Dual BRI ISDN Router IPX Configuration 6 - 6 The following table describes the Novell IPX Ethernet Setup Menu. Novell IPX Ethernet Setup Fields Field Description Options Seed Router Determine if your Prestige is to act as a see d router. Yes/No Frame Type Enable/Disable the individual frame type. Remember to enable only the ones that a[...]

Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6 - 7 6.5 LAN - to - LAN Application with Novell IPX A typical LAN - to - LAN application is to u se your Prestige to call from a branch office to the corporate headquarters to enable the stations in the branch office to access the NetWare servers at the headquarters, as depicted in the next figu[...]

Prestige 480 Dual BRI ISDN Router IPX Configuration 6 - 8 6.6 IPX Remote Node Setup Follow the procedure in Chapter 5 to configure the protocol - independent parameters in Menu 11.1 - Remote Node Profile . For the IPX - specific parameters in Menu 11.3 - Remote Node Network Layer Options follow the instructions below. If you want th e Prestige to r[...]

Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6 - 9 The table below describes the IPX - specific parameters of the remote node setup. Remote Node Novell IPX Options Field Description Option Dial - On - Query This field is necessary for your Prestige on the client side. When set t o Yes , any Get Service SAP or RIP broadcasts will trigger you[...]

Prestige 480 Dual BRI ISDN Router IPX Configuration 6 - 10 6.6.1 IPX Static Route Setup Similar to IP, IPX static routes tell the Prestige how to reach servers beyond a remote node before a co nnection to that remote node is established. From Menu 12 , select two, then select one of the IPX Static Routes to open Menu 12.2.1 - Edit IPX Static Route [...]

Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6 - 11 The following table contains the instructions on how to configure the Edit IP Static Route Menu. Edit IPX Static Route Menu Fields Field Description Server Name In this field, enter the name of the server. This must be the exact name configured in the NetWare server . Network # This field [...]

[...]

Prestige 4 80 Dual BRI ISDN Router Bridging Setup 7 - 1 Chapter 7 Bridging Setup This chapter shows you how to configure the bridging parameters of your Prestige. 7.1 Bridging in Ge neral Bridging bases the forwarding decision on the MAC (Media Access Control ), or hardware address, while routing does it on the network layer (IP or IPX) address. Br[...]

Prestige 480 Dual BRI ISDN Router 7 - 2 Bridging Setup Menu 3.5 - Bridge Ethernet Setup The following table describes how to configure the Handle IPX field in Menu 3.5. Bridge Ethernet Setup Menu - Handle IPX Field Configuration Handle IPX Field (Menu 3.5) Description None When there is no IPX traffic on the LAN or when you do not want to apply any[...]

Prestige 4 80 Dual BRI ISDN Router Bridging Setup 7 - 3 Step 2. Move the cursor to the Edit IP/IPX/Bridge field, then press the space bar to select Yes and press [ Enter] to open Menu 11.3 - Network Layer Options . Menu 11.3 - Remote Node Bridging Options The following table describes the bridging - specific parameters in the Remote Node Profile an[...]

Prestige 480 Dual BRI ISDN Router 7 - 4 Bridging Setup Timeout (min) retain the Ethernet Addr information in its internal tables while the line is down. If this information is retained, your Prestige will not have to recompile the tables when th e line is brought back up. Once you have completed filling in the Network Layer Options Menu, press [Ent[...]

Prestige 4 80 Dual BRI ISDN Router Bridging Setup 7 - 5 Menu 12.3.1 - Edit Static Route[...]

Prestige 480 Dual BRI ISDN Router 7 - 6 Bridging Setup The following table describes the Bridge Static Route Menu. Bridge Static Route Menu Fields Field Descri ption Route Name Enter a name for the bridge static route for identification purposes. Active Activate/deactivate the static route. Ether Address Enter the MAC address of the destination mac[...]

Prestige 4 80 Dual BRI ISDN Router Dial - In Server Configuration 8 - 1 Chapter 8 D ial - in Server Configuration This chapter shows you how to configure your Prestige to receive calls from remote dial - in users, e.g., telecommuters, as well as remote nodes. There are several differences between dial - in users and remote nodes, as summarized in t[...]

Prestige 480 Dual BRI ISDN Router 8 - 2 Dial - In Server Configuration 8.1 Remote Access Server Telecommuting enables people to work at remote sites and yet still have access to the resources in the business office. Typically, a telecommu ter will use a client workstation with TCP/IP and dial - out capabilities, e.g., a Windows PC or a Macintosh. F[...]

Prestige 4 80 Dual BRI ISDN Router Dial - In Server Configuration 8 - 3 8.2 LAN - to - LAN Server Application Your Prestige can also be used as a dial - in server for LAN - to - LAN application to provide access for the workstations on a remote network. For your Prestige to be set up as a LAN - to - LAN server, you need to configure the Default Dia[...]

Prestige 480 Dual BRI ISDN Router 8 - 4 Dial - In Server Configuration 8.3 Default Dial - in Setup This section covers the default dial - in parameters. The parameters in Menu 13 affect incoming calls from both remote dial - in users, and remote nodes until authentication is completed. Once authentication is completed and if it matches a remote nod[...]

Prestige 4 80 Dual BRI ISDN Router Dial - In Server Configuration 8 - 5 Telco Options: CLID Authen This field sets the CLID authentication parameter for all incoming calls. There are three options for this field: l None - No CLID is required. l R equired – CLID must be available, or the Prestige will not answer the call. l Preferred - If the CLID[...]

Prestige 480 Dual BRI ISDN Router 8 - 6 Dial - In Server Configuration Callback Budget Management: Allocated Budget (min) This field sets the budget callback time for all the remote dial - in users. The default for this field is 0 for no budget control. Default = 0 Period (hr) This field sets the time interval to reset the above callback budget con[...]

Prestige 4 80 Dual BRI ISDN Router Dial - In Server Configuration 8 - 7 8.3.1 Default Dial - in Filter Move cursor to the field Edit Filter Sets in Menu 13 , press space bar to toggle and set the value to Yes an d then press [Enter] to open Menu 13.1 – Default Dial - in Filter. Use this menu to specify the filter set(s) to apply to the incoming a[...]

Prestige 480 Dual BRI ISDN Router 8 - 8 Dial - In Server Configuration Figure 8 - 5 Menu 14 - Dial - in User Setup Step 2. Select one of the users by number, this will bring you to Menu 14.1 - Edit Dial - in User , as shown next. Figure 8 - 6 Edit Dial - in User Menu 14.1 - Edit Dial - in User User Name= ? Active= Yes Password= ? Callback= No Phone[...]

Prestige 4 80 Dual BRI ISDN Router Dial - In Server Configuration 8 - 9 The following table provides instructions on how to fill in the Edit Dial - In User fields . Table 8 - 3 Edit Dial - in User Menu Fields Field Description Option User Name This is a required field. This will be used as the login name for authentication. Choose a descriptive wor[...]

Prestige 480 Dual BRI ISDN Router 8 - 10 Dial - In Server Configuration Idle Time - out Enter the idle time (in seconds). This time - out determines how long the dial - in user can be idle before you r Prestige disconnects the call when the Prestige is calling back. Idle time is defined as the period of time where there is no data traffic between t[...]

Prestige 4 80 Dual BRI ISDN Router Dial - In Server Configuration 8 - 11 Configuring your Prestige Figure 8 - 8 Configuring Menu 13 for Remote Access Figure 8 - 9 Edit Dial - in - User for RAS Menu 13 - Defau lt Dial - in Setup Telco Options: CLID Authen= None PPP Options: Recv Authen= PAP Compression= Yes Mutual Authen= No PAP Login= N/A PAP Passw[...]

Prestige 480 Dual BRI ISDN Router 8 - 12 Dial - In Server Configuration Note : Th e caller always controls Idle Timeout, so the Idle Timeout field does not apply when there is callback. 8.4.2 CLID Authentication CLID (Calling Line IDentification) authentication affords you the security of limiting a user to only initiate connections from a fixed lo[...]

Prestige 4 80 Dual BRI ISDN Router Dial - In Server Configuration 8 - 13 Figure 8 - 10 LAN 1 LAN - to - LAN Application LAN 2 Figure 8 - 11 LAN2 LAN - to - LAN Application Menu 11.1 - R emote Node Profile Rem Node Name= LAN_2 Active= Yes Call Direction= Both Incoming: Rem Login= lan2 Rem Password= ***** ** Rem CLID= Call Back= No Outgoing: My Login[...]

Prestige 480 Dual BRI ISDN Router 8 - 14 Dial - In Server Configuration Testing Callbac k with your Connection Go to Menu 24.4.5 of the Prestige on LAN 1 and enter the numbers that correspond to the menu in the above LAN 1. Figure 8 - 12 Testing Callback with your Connection 8.4.4 Configuring the Prest ige for Callback with CLID The only difference[...]

Prestige 4 80 Dual BRI ISDN Router Dial - In Server Configuration 8 - 15 Figure 8 - 13 Callback with CLID Configuration Menu 11.1 - Remote Node Profile Rem Node Name= LAN_1 Active= Yes Call Direction= Both Incoming: Rem Login= lan1 Rem Password= ******* Rem CLID= 1234 Call Back= Yes Outgoing : My Login= lan2 My Password= ******** Authen= CHAP/PAP P[...]

Prestige 480 Dual BRI ISDN Router 8 - 16 Dial - In Server Configuration Menu 13 Figure 8 - 14 Configuring CLID with Callback Testing your Connection with Callback and CLID Go to Menu 24.8 (Prestige on LAN 2) and type “sys trcl call”. The Prestige displays all communication traces as shown in the next figure. If CLID authentication fails, this m[...]

Prestige 4 80 Dual BRI ISDN Router Dial - In Server Configuration 8 - 17 Figure 8 - 15 Callback and CLID Connection Test 8.5 Multiple Servers behind SUA If you wish, you can make inside servers for different services, e.g., web or FTP, visible to the outside users, even though SUA makes your whole inside network appear as a si ngle machine to the o[...]

Prestige 480 Dual BRI ISDN Router 8 - 18 Dial - In Server Configuration 8.5.1 Configuring a Server behind SUA Follow the steps below to configure a server behind SUA: 1. Enter 15 in the main menu to go to Menu 15, Multiple Server Configuration . 2. Enter an index number in menu 15 to go t o Menu 15.1, SUA Server Configuration . 3. Enter the service[...]

Prestige 4 80 Dual BRI ISDN Router Dial - In Server Configuration 8 - 19 Services Port Number FTP (File Transfer Protocol) 21 Telnet 23 SMTP (Simple Mail Transfer Protocol) 25 DNS(Domain Name System) 53 HTTP (Hyper Text Transfer protocol or WWW, Web) 80 PPTP (Point - to - Point Tunneling Protocol) 1723[...]

[...]

Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9 - 1 Chapter 9 Filter Configuration This chapter shows you how to create and apply filter(s). 9.1 About Filtering Your Prestige uses filters to decide whether or not to allow passage of a packet. Data filters are further divided into incoming and outgoing filters, depending o n the direction [...]

Prestige 480 Dual BRI ISDN Router 9 - 2 Filter Configuration Start Packet into Filter Accept Packet Drop Packet Fetch Next Filter Set Next Filter Set Available? Yes Filter Set Fetch First Filter Rule Execute Filter Rule Next Filter Rule Available? Fetch Next Filter Rule No Fetch First Filter Set Yes Check Next Rule Drop No Forward Figure 9 - 1 Filt[...]

Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9 - 3 9.2 Configuring a Filter Set To configure a filter sets, follow the procedure below: Step 1. Select option 21. Filter Set Configuration from the Main Menu to open Menu 21. Figure 9 - 2 Menu 21 - Filter Set Configuration Step 2. Select the filter set you wish to configure (no. 1 - 12) and[...]

Prestige 480 Dual BRI ISDN Router 9 - 4 Filter Configuration Figure 9 - 3 Menu 21.1 - Filter Rules Summary Figure 9 - 4 Menu 21.2 - Filter Rules Summary 9.2.1 Filter Rules Summary Menus The preceeding screens show summaries of the existing rules in the filter set. The following tables contain a brief description of the abbreviations used in Menu 21[...]

Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9 - 5 [N] means the filter rule is inactive. Type Refers to the type of filter rule. This shows GEN for Generic and IP for TCP/IP. [GEN] for Generic. [IP] for TCP/IP. Filter Rules The filter rule parameters will be d isplayed here (see below). M Refers to More. [Y] means an action can not yet [...]

Prestige 480 Dual BRI ISDN Router 9 - 6 Filter Configuration Table 9 - 2 Abbreviations used if Filter Type is IP Abbreviation Description Pr Protocol SA Source Address SP Source Port number DA Destination Address DP Destination Port number l If the filter type is GEN (generic), the following abbreviations listed in the following table will be used.[...]

Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9 - 7 9.3.1 Filter Types and SUA There are two categories of filter rules, Device Filter (Generic) rules and Protocol Filter (TCP/ IP) rules. Device Filter rules act on the raw data from/to LAN and WAN. Protocol Filter rules act on the IP packets. Generic and TCP/IP filter rules are discussed [...]

Prestige 480 Dual BRI ISDN Router 9 - 8 Filter Configuration 9.3.2 TCP/IP Filter Rule This section shows you how to c onfigure a TCP/IP filter rule. TCP/IP rules allow you to base the rule on the fields in the IP and the upper layer protocol, e.g., UDP and TCP, headers. To configure a TCP/IP rules, select TCP/IP Filter Rule from the Filter Type fie[...]

Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9 - 9 The majority of IP packets do not have source route. Destination: IP Addr Enter the d estination IP Address of the packet you wish to filter. This field is a don’t - care if it is 0.0.0.0. IP address Destination: IP Mask Enter the IP subnet mask to apply to the Destination: IP Addr. Su[...]

Prestige 480 Dual BRI ISDN Router 9 - 10 Filter Configuration Drop On ce you have completed filling in Menu 21.1.1 - TCP/IP Filter Rule, press [Enter] at the message [Press Enter to Confirm] to save your configuration, or press [Esc] to cancel. This data will now be displayed on Menu 21.1 - Filter Rules Summary. The followi ng diagram illustrates t[...]

Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9 - 11 Packet into IP Filter Matched Matched Yes Action Matched Action Not Matched More? No Filter Active? Check IP Protocol Drop Drop Packet Accept Packet Drop Forward Check Next Rule Check Next Rule Check Next Rule Forward Not Matched Yes No Check Src IP Addr Apply SrcAddrMask to Src Addr Ma[...]

Prestige 480 Dual BRI ISDN Router 9 - 12 Filter Configuration 9.3.3 Generic Filter Rule This section shows you how to configure a generic fi lter rule. The purpose of generic rules is to allow you to filter non - IP packets. For IP, it is generally easier to use the IP rules directly. For generic rules, the Prestige treats a packet as a byte stream[...]

Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9 - 13 Table 9 - 5 Generic Filter Rule Menu Fields Field Description Option Filter # This is the filter set, filter rule co - ordinates, i.e., 2,3 refers to the second filter set and the third rule of that set. Filter Type Use the space bar to toggle between both types of rules. Parameters dis[...]

Prestige 480 Dual BRI ISDN Router 9 - 14 Filter Configuration 9.3.4 IPX Filter Rule This section shows you how to configure an IPX Filter Rule. IPX filters allow you to base the rules on the fields in the IPX headers. To configure an IPX rule, select IPX Filter Rule from the Filter Type field and press [Enter] to open Menu 21.1.3 IPX Filter Rule , [...]

Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9 - 15 The table below describes the IPX Filter Rule. Table 9 - 6 IPX Filter Rule Menu Fields Field Description IPX Packet Type Enter the IPX packet type (1 - byte in hexad ecimal) you wish to filter. The popular types are (in hexadecimal): 01 - RIP 04 - SAP 05 - SPX (Sequenced Packet eXchange[...]

Prestige 480 Dual BRI ISDN Router 9 - 16 Filter Configuration 9.4 Applying Filters and Factory Defaults This section shows you where to apply the filter(s) after you design it (them). Two sets of factory default filter rules have been configured in Menu 21 to prevent NetBIOS traffic from triggering calls (see Figure 8 - 7 Menu 21 - Filter Set Confi[...]

Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9 - 17 Figure 9 - 11 Filtering Remote Node traffic 9.4.3 Default Dial - in Filter Use Menu 13.1 Default D ial - in Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between all dial - in users and your Prestige. Note that these filter set(s) only apply to the di[...]

[...]

Prestige 4 80 Dual BRI ISDN Router SNMP Configuration 10 - 1 Chapter 10 SNMP Configuration This chapter explains how to configur e SNMP. 10.1 About SNMP SNMP (Simple Network Management Protocol) is a protocol for network management and monitoring. Your Prestige supports SNMP agent functionality, which allows a manager station to manage and monitor [...]

Prestige 480 Dual BRI ISDN Router 10 - 2 SNMP Configuration Figure 10 - 1 Menu 22 - SNMP Configuration[...]

Prestige 4 80 Dual BRI ISDN Router SNMP Configuration 10 - 3 The following table describes the SNMP configuration parameters. Ta ble 10 - 1 SNMP Configuration Menu Fields Field Description Default Get Community Enter the get community, which is the password for the incoming Get - and Get Next - requests from the management station. public Set Commu[...]

[...]

Prestige 4 80 Dual BRI ISDN Router System Security 11 - 1 Chapter 11 System Security This ch apter helps you to change the system password and to configure an external authentication server. 11.1 Changing the System Password To change the system password , follow the steps shown next: Step 1. Select option System Security in the Main Menu to open M[...]

Prestige 480 Dual BRI ISDN Router 11 - 2 System Security Step 2. From the System Security Menu, select option Change Password to open Menu 23.1 - System Security - Change Password . Step 3. Enter your existing system password and press [Enter] . Figure 11 - 2 Menu 23.1 - System Security - Change Password Step 4. Enter your new system password and p[...]

Prestige 4 80 Dual BRI ISDN Router System Security 11 - 3 11.2 Using RADIUS Authentication Your Prestige has a built - in dial - up user list; however, the number of users that can be stored locally is limited due to memor y constraints. If you have more users than what the Prestige can store locally, use an external RADIUS (Remote Authentication D[...]

Prestige 480 Dual BRI ISDN Router 11 - 4 System Security These changes add the support for CLID authentication, as described in the following section.[...]

Prestige 4 80 Dual BRI ISDN Router System Security 11 - 5 11.2.2 RADIUS Server Configuration To configure the RADIUS server, select option 23, System Security, from the Main Menu to open Menu 23 - System Security . Select option 2, External Server from this menu to open Menu 23.2 - System Security - External Server , shown next. The radius authenti[...]

Prestige 480 Dual BRI ISDN Router 11 - 6 System Security The fields in the System Security - External Server Menu are l isted in the following table. Table 11 - 1 System Security - External Server Menu Fields Field Description Default Active Determines whether the external security facility is enabled. If No, only the built - in dial - up user list[...]

Prestige 4 80 Dual BRI ISDN Router System Security 11 - 7 11.2.5 Using RADIUS Authentication for CLID To use RADIUS for CLID authentication, create a user record in the users file where the user name (the first field) is the telephone number, and the password (the second field) is always Zyxel-CLID (case - sensitive). The regular user name is put i[...]

Prestige 480 Dual BRI ISDN Router 11 - 8 System Security The fields in Menu 24.3.3 are listed in the following table. Table 11 - 2 System Maintenance – Accounting Server Fields Field Description Active Determines whether the accounting facility is on or off. Type Determines the type of the accounting server. At present only RADIUS is supported. S[...]

Prestige 4 80 Dual BRI ISDN Router System Security 11 - 9 The following table describes the acc ounting attributes mentioned in the above example. Note: Accounting attributes may vary depending on the external server. Table 11 - 3 Accounting Attributes Field Description Acct - Status - Type Account Status Typ e has four values: Accounting On, Accou[...]

[...]

Prestige 4 80 Dual BRI ISDN Router Telnet Conf iguration 12 - 1 Chapter 12 Telnet Configuration and Capabilities This chapter discusses using telnet to remotely configure your Prestige . 12.1 A bout Telnet Configuration Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the console port. Once your Presti[...]

Prestige 480 Dual BRI ISDN Router 12 - 2 Telnet Configuration Figur e 12 - 1 Telnet Configuration on a TCP/IP Network 12.2 Telnet Under SUA When Single User Account (SUA) is enabled and an inside server is specified, telnet connections from the outside will be forwarded to the insid e server. So to configure the Prestige via telnet from the outside[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 1 Chapter 13 System Maintenance This chapter covers the diagnostic tools that help you to ma intain your Prestige. These tools include updates on system status, port status, log and trace capabilities and upgrades for the system software. This chapter describes how to use these tools in det[...]

Prestige 480 Dual BRI ISDN Router 13 - 2 System Maintenance 13.1 System Status The first selection, System Status , gives you information on the vers ion of your system firmware and the status and statistics of the ports, as shown next. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on your[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 3 If you enter 9 in the Press Command field you will see the following menu: Figure 13 - 3 Menu 24.1 after Toggle Status The following table describes the fields present in Menu 24.1 - System Maintenance - Status . It should be noted that these fields are READ - ONLY an d are meant to be us[...]

Prestige 480 Dual BRI ISDN Router 13 - 4 System Maintenance Speed Shows the current connecting speed. TxPkts Shows the number of transmitted packets on this channel. RxPkts Shows the number of received packets on thi s channel. Errors Shows the number of error packets on this channel. CLU (Current Line Utilization) percentage of current bandwidth u[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 5 The following figure shows two e xamples of triggering packets from the LAN: the first of an ICMP ping packet (Type: IP) and the second a SAP broadcast packet (Type: Raw). With this information, you can determine the workstation from the source IP address or the source MAC address of the [...]

Prestige 480 Dual BRI ISDN Router 13 - 6 System Maintenance 13.1.1 System Information Figure 13 - 5 System Maintenance - Information Table 13 - 2 Fields in System Maintenance Field Description Name displays the system name of your Prestige. This information can be modified in Menu 1 - General Setup . Routing Refers to the routing protocol used. ZyN[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 7 13.1.2 Console Port Speed You can change the console port speed through Men u 24.2.2 – Console Port Speed . Your Prestige supports 9600 , 19200, 38400, 57600, and 115200bps for the console port. Use the space bar to select the desired speed in Menu 24.2.2, as shown next. Figure 13 - 6 M[...]

Prestige 480 Dual BRI ISDN Router 13 - 8 System Maintenance After the Prestige finishes displaying, you will have the option to clear the error log.[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 9 Examples of typical er ror and information messages are presented in the following figure. Figure 13 - 7 Examples of Error and Information Messages 13.2.2 Syslog And Accounting The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to a syslog s[...]

Prestige 480 Dual BRI ISDN Router 13 - 10 System Maintenance Figure 13 - 8 Menu 24.3.2 - System Maintenance – UNIX Syslog and Accounting[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 11 You need to configure the parameters described in the table below to activate syslog. Table 13 - 3 System Maintenance Menu - UNIX Syslog Pa rameters Parameter Description Active Use the space bar to turn on or off syslog. Syslog IP Address Enter the IP Address of your syslog server. Log [...]

Prestige 480 Dual BRI ISDN Router 13 - 12 System Maintenance 2. Packet triggered Jul 19 11:28:39 192.168.102.2 ZyXEL Communications Corp.: Packet Tri gger: Protocol=1, Data=4500003c100100001f010004c0a86614ca849a7b08004a5c020001006162636465666768696a6b6c6d6e6f 7071727374 Jul 19 11:28:56 192.168.102.2 ZyXEL Communications Corp.: Packet Trigger: Proto[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 13 13.3 Diagnostic The diagnostic facility allows you to test the different aspects of your Prestige to determine if it is working properly. Menu 24. 4 allows you to choose among various types of diagnostic tests to evaluate your system, as shown next. Figure 13 - 9 Menu 24.4 - System Maint[...]

Prestige 480 Dual BRI ISDN Router 13 - 14 System Maintenance The following table describes the diagnost ic tests available in Menu 24.4 for your Prestige and the connections. Table 13 - 4 System Maintenance Menu Diagnostic Field Description Hang Up B1 Call This tool hangs up the B1 channel. This is only applicable if the B1 channel is currently in [...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 15 The following figure shows an example of a successful connection after selecting option Manual Call in Menu 24.4. Figure 13 - 1 0 Trace Display for a Successful Manual Call This figure shows a trace example where authentication failed. Figure 13 - 11 Trace Display for a Failed Authentica[...]

Prestige 480 Dual BRI ISDN Router 13 - 16 System Maintenance 13.4 Boot Module Command Prest ige boot module commands are shown next. For ATBAx, x denotes the number preceding the colon to give the baud rate following the colon in the list of numbers that follows; e.g. ATBA3 will give a baud of 9.6 Kbps. ATSE displays the seed that is used to genera[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 17 13.5 Command Interpreter Mode This option allows you to enter the command interpreter mode(CI) . A list of valid commands can be found by typi ng [help] at the command prompt. For more detailed information, check your PNC installation disc or visit the ZyXEL Web site or send e - mail to [...]

Prestige 480 Dual BRI ISDN Router 13 - 18 System Maintenance phone number is put in the blacklist. You will have to enable the number manually before the Prestige will dial that number again. Call history chronicles preceding incoming and outgoing calls. To enter the call control menu, select option 9. Call Control in Menu 24 to go to Menu 24.9 - S[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 19 Table 13 - 5 Call Control Parameters Fields Field Description Dialer Timeout: Digital Call (sec) The Prestige will timeout if it cannot set up an outgoing digital call within the timeout value. Retry Counter How many times a busy or ‘no answer’ telephone numbe r is retried before it [...]

Prestige 480 Dual BRI ISDN Router 13 - 20 System Maintenance 13.6.3 Budget Management Menu 24.9.3 Budget Management shows the budget management statistics for outgo ing calls. Figure 13 - 17 Menu 24.9.3 - Budget Management The total budget is the time limit on the accumulated time for outgoing call to a remote node or for calling back to the dial -[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 21 13.6.4 Call History This is the fourth option in Call Control and relays information about past incoming and outgoing calls. Figure 13 - 18 Call History Table 13 - 6 Call History Fields Field Description Phone Number This is the telephone number of past incoming and outgoing calls. Dir T[...]

Prestige 480 Dual BRI ISDN Router 13 - 22 System Maintenance 13.7 Time and Date Setting Menu 24.10 allows you to update the time and date settings of your Prestige 480 . Figure 13 - 19 System Maintenanc e – Time and Date Setting Table 13 - 7 Time and Date Setting Fields Field Description New Time Enter the new time in hour, minute and second form[...]

Prestige 4 80 Dual BRI ISDN Router System Maintenance 13 - 23[...]

[...]

Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14 - 1 Chapter 14 Backup, Restore and Upload You can perform the backup, restore and upload through the console port, TFTP or FTP. Any serial communications program should work fine; however, you must use XMODEM protocol to perform the download/upload. Please note that terms “download?[...]

Prestige 480 Dual BRI ISDN Router 14 - 2 Backup, Restore and Upload Step 2. Press “Y” to indicate that you want to continue. The following procedure is for the HyperTerminal program. The procedure for other serial commun ications programs should be similar. Step 3. Click “Transfer” in the HyperTerminal toolbar, then “Receive File” in th[...]

Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14 - 3 Step 3. Locate the “ rom-spt ” file. Step 4. Type get rom-spt to backup the current Prestige configuration to your workstation. For details on FTP commands, please consult the documentation of your FTP client program. 14.1.3 Back up using TFTP Even though TFTP should work over[...]

Prestige 480 Dual BRI ISDN Router 14 - 4 Backup, Restore and Upload Example Using Walusoft TFTP Client Figure 14 - 4 TFTP Example 14.2 Restore Configuration Option 6 from Menu 24 – System Maintenance allows you to restore the current workstation backup configuration to your Prestige. 14.2.1 Restore using the Console Port You can restore the confi[...]

Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14 - 5 Please note that the system reboots automatically after the file transfer process is complete. Figure 14 - 5 Menu 24.6 – Restore Configur ation using the Console Port Step 1. Go to Menu 24.6 . Step 2. Press “Y” to indicate that you want to continue. The following procedure i[...]

Prestige 480 Dual BRI ISDN Router 14 - 6 Backup, Restore and Upload Figure 14 - 7 Successful Restoration 14.2.2 Restore using FTP Even though FTP should work over WAN as well, it is not recommended. To transfer your current workstation configuration to your Prestige, follow the procedure below: Step 1. Launch the FTP client on your workstation. Ste[...]

Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14 - 7 Step 5. Go to SMT menu 24.6. Note that you must remain in this menu until file transfer is complete. Step 6. Use the TFTP client to transfer files between the Prestige and the workstation. The rem ote file name on the Prestige is “rom - spt”. Step 7. The system reboots automat[...]

Prestige 480 Dual BRI ISDN Router 14 - 8 Backup, Restore and Upload 14.3.1 Upload through the Console Port Upload Firmware File The firmware is the program that controls the functions of the Prestige. Menu 24.7.1 shows you the instructions for uploading the firmware . If you answer yes to the prompt, the Prestige will go into debug mode. Follow the[...]

Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14 - 9 Figure 14 - 9 Menu 24.7.1 - Uploading Router Firmware Upload Configuration File The configuration data, system - rel ated data, the error log and the trace log are all stored in the configuration file. Please be aware that uploading the configuration file replaces everything conta[...]

Prestige 480 Dual BRI ISDN Router 14 - 10 Backup, Restore and Upload If you replace the current configuration file with the default configuration file, i.e., p480.rom, you will lose all configurations that you had before and the speed of the console port will be reset to the default of 9600 bps with 8 data bit, no parity and 1 stop bit (8n1) . You [...]

Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14 - 11 Step 3. Enter the administrator password. The default is 1234 Step 4. Enter the command “bin” to set binar y transfer type Step 5. Use the command “put” to transfer files between the Prestige and the workstation. The file name for the firmware is “ras” and for the con[...]

Prestige 480 Dual BRI ISDN Router 14 - 12 Backup, Restore and Upload Figure 14 - 12 Edit Host Step 4. Press 'OK' to ignore the 'User name' prompt. Figure 14 - 13 Username Prompt Step 5. To upload the firmware file, transfer the local 'ras' file to overwrite the remote 'ras' file. To upload the configuration f[...]

Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14 - 13 Figure 14 - 14 Files Transfer The system reboots after a successful upload. 14.3.3 Upload using TFTP In addition to the direct console port connection, the Prestige supports the up /downloading of the firmware and the configuration file using TFTP (Trivial File Transfer Protocol)[...]

Prestige 480 Dual BRI ISDN Router 14 - 14 Backup, Restore and Upload Step 4. Launch TFTP client on your workstation and connect to the Prestige. Set the transfer mode to binary before starting data transfer. Step 5. Use the TFTP client to transfer files between the Prestige and the workstation. T he file name for the firmware is “ ras ” and for[...]

Prestige 4 80 Dual BRI ISDN Router IP Policy Routing 15 - 1 Chapter 15 IP Policy Routing 15.1 Introduction Traditionally, routing is based on the destination address only and the router takes the shortest path to forward a packet. IP Policy Routing (IPPR) provides a mechanism to override the default routing behavior and alter the packet forwarding [...]

Prestige 480 Dual BRI ISDN Router 15 - 2 IP Policy Routing The actions that can be taken include routing the packet to a different gateway (and hence the outgoing interface) and the TOS and precedence fields in the IP header. IPPR follows the existing packet filtering facili ty of ZyNOS in style and in implementation. The policies are divided into [...]

Prestige 4 80 Dual BRI ISDN Router IP Policy Routing 15 - 3 Menu 25.1 shows the summary of a policy set, including the criteria and the actio n of a single policy, and whether a policy is active or not. Each policy contains two lines. The former part is the criteria of the incoming packet, and the latter is the action. Between these two parts, sepa[...]

Prestige 480 Dual BRI ISDN Router 15 - 4 IP Policy Routing IP Routing Policy Summary Abbreviation Meaning Criteria SA Source IP address SP Source port DA Dest ination IP address DP Destination port P IP layer 4 protocol number(TCP=6,UDP=17…) T Type Of Service of Incoming packet PR Precedence of incoming packet Action GW Gateway IP address T Outgo[...]

Prestige 4 80 Dual BRI ISDN Router IP Policy Routing 15 - 5 Figure 15 - 1 Menu 25.1.1 - IP Routing Policy Table 15 - 1 IP Routing Policy Menu Fields Field Description Policy Set Name This is the name of the policy set assigned in Menu 25 - IP Routing Policy Setup. Active Press the spacebar to select Yes to activate the policy. Criteria IP Protocol [...]

Prestige 480 Dual BRI ISDN Router 15 - 6 IP Policy Routing port start= / end= Source port number range from start to end; applicable only for TCP/UDP. Destination: addr start= / end= Destination IP address range from start to end. port start= / end= Destination port number range from start to end; applicable only for TCP/UDP. Action= Specifies whet[...]

Prestige 4 80 Dual BRI ISDN Router IP Policy Routing 15 - 7 15.2 Applying an IP Policy This section shows you where to apply the IP Polici es after you design them. 15.2.1 Ethernet IP Policies From Menu 3 - Ethernet Setup , enter 2 to go to Menu 3.2 – TCP/IP Ethernet Setup . You can choose up to four IP Policy sets (from twel ve) by entering thei[...]

[...]

Prestige 4 80 Dual BRI ISDN Router Troubleshooting 16 - 1 Chapter 16 Troubleshooting This chapter covers the potential problems you may run into and the possible rem edies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. If you still have problems, check all the connections and settin[...]

Prestige 480 Dual BRI ISDN Router 16 - 2 Troubleshooting The Prestige drops the call even though the authentication phase was successful. Check the IP address of the remote node. The Prestige uses the IP address as another form of authentication. Hence, if the address supplied by the remote node does not match the address the Prestige is expecting,[...]

Prestige 4 80 Dual BRI ISDN Router Troubleshooting 16 - 3 16.2 Problems With the ISDN Lines Table 16 - 2 Troubleshooting the ISDN Lines Problem Corrective Action Check the error log (in Menu 24.3.1 ), you should see a log entry for the ISDN initialization failure in the format, ‘ ISDN init failed. code<n>... ’. Note the code number, n. If[...]

Prestige 480 Dual BRI ISDN Router 16 - 4 Troubleshooting 16.3 Problems with the Ethernet Connection Table 16 - 3 Troubleshooting the Ethernet Connection Problem Corrective Action Check the Ethernet LED’s on the front panel. The LNK LED should be on when the Prestige has made a successful Ethernet connection. If it is off, check the cables between[...]

Prestige 4 80 Dual BRI ISDN Router Troubleshooting 16 - 5 16.5 Problems for Remote User to Dial - in Table 16 - 5 Troubleshooting for Remote Users to Dial - in Problem Corrective Action First verify that you have config ured the authentication parameters in Menu 13. These would be CLID Authen and Recv. Authen. In Menu 14, verify the user name and p[...]

[...]

Prestige 4 80 Dual BRI ISDN Router Worksheet A Information Worksheet This information worksheet has been provided to help you collect the following information for future use. General Information System Name Protocol Routing q TCP/IP ISDN Information Switch Type q DSS1 B - Channel Usage q Switch/Switch q Switch/Leased q Leased/Switch q Leased/Unuse[...]

Prestige 480 Dual BRI ISDN Router Worksheet B General Information The Prestige requires certain system information. You can obtain all the pertinent information from your network administrator. System Name - This is the name given by you in Menu 1 to the Prestige for identification purpose. Prot ocol Routing – This refers to the protocols used fo[...]

Prestige 4 80 Dual BRI ISDN Router Worksheet C The table below lists some examples of IP subnet masks and the number of hosts that are allowed. Consult your network administrator if you are unsure of this value. Table 16 - 6 IP Subnet Masks and the Number of Hosts IP Subnet Mask Number of Host ID’s Number of Bits 255.255.255.0 254 24 255.255.255.[...]

[...]

Prestige 4 80 Dual BRI ISDN Router Enhanced Syslog E Enhanced Syslog The following are the message formats that Syslog sends to the server. CDR SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String ); String = board xx line xx channel xx , call xx , str board = t he hardware board ID line = the WAN ID in a board Channel = channel ID within the WAN call [...]

[...]

Prestige 4 80 Dual BRI ISDN Router Acronyms and Abbreviations G Acronyms and Abbreviations BAP/BACP Bandwi dth Allocation Protocol/Bandwidth Allocation Control protocol BOD Bandwidth on Demand CDR Call Detail Record CHAP Challenge Handshake Authentication Protocol CLID Calling Line IDentification CSU/DSU Channel Service Unit/Data Service Unit DCE D[...]

Prestige 480 Dual BRI ISDN Router Acronyms and Abbreviations H SAP Service Advertising Protocol SNAP Sub - Network Access Protocol SNMP STP Simple Network Management Protocol Shielded Twisted Pair (cable) SUA Sin gle User Account TA (ISDN) Terminal Adapter TFTP Trivial File Transfer Protocol TCP Transmission Control Protocol UDP User Datagram Proto[...]

Prestige 4 80 Dual BRI ISDN Router Index I Index 8 802.2, 6 - 1 802.3, 6 - 1 A acronyms and abbreviation s, G authentication protocol, 4 - 5 auto - negotiation, 1 - 2 B backup configuration, 14 - 1 BACP, 4 - 6 Bandwidth on Demand. See BOD BAP, 1 - 3, 4 - 6 Base Transmission Rate, 4 - 6 blacklist, 13 - 17 BOD, 1 - 3, 4 - 6, 4 - 7 boot module command[...]

Prestige 480 Dual BRI ISDN Router Inde x J Filter IPX Packet Types, 9 - 14 filter log, 13 - 9 frame type, 6 - 1 front panel, 2 - 1 G gateway , 7 - 5 gateway IP address, 5 - 8 general setup, 2 - 10 generic filter rule, 9 - 11 H housing, 2 - 4 I IANA, 3 - 2 idle timeout, 4 - 5 Interactive Applications, 15 - 1 Internet access, 1 - 5, 3 - 1, 3 - 14 IP [...]

Prestige 4 80 Dual BRI ISDN Router Index K Configuration, 3 - 16 MP, 4 - 6 Multilink. See MP Multiple ISPs Support. See Mega Bundle multiple servers, 8 - 16 N nailed - up connection, 4 - 5 NetCA PI, 2 - 14 CAPI, 2 - 14 ISDN - DCP, 2 - 14 RVS - CE and RVS - COM Lite, 2 - 15 NetCAPI Configuration, 2 - 16 P PABX , 2 - 13 packet triggered, 13 - 9 PAP, [...]

Prestige 480 Dual BRI ISDN Router Inde x L FTP, 14 - 2 TFTP, 14 - 2 Restore, 14 - 4 Console Port, 14 - 4 FTP, 14 - 6 TFTP, 14 - 6 system managem ent, 13 - 1 System Management Terminal. See SMT system status, 13 - 2 T target utility, 4 - 7 TCP/IP, 3 - 2, 3 - 4, 5 - 1, 13 - 12, B TCP/IP filter rule, 9 - 7 Telco options, 3 - 11 telnet, 12 - 1 TFTP, 1 [...]