Go to page of
Similar user manuals
-
Laptop
Acer TravelMate 630 series
92 pages 0.21 mb -
Laptop
Acer eMachines E725-452G64Mikk
54 pages -
Laptop
Acer TM7300
217 pages 3.96 mb -
Laptop
Acer a-550 Series
112 pages 6.73 mb -
Laptop
Acer 3410T
11 pages 1.71 mb -
Laptop
Acer 5630Z SERIES
152 pages 8.93 mb -
Laptop
Acer 3010
88 pages 4.17 mb -
Laptop
Acer 1510 Series
99 pages 4.69 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Acer N141I1-L05 (GLARE), along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Acer N141I1-L05 (GLARE) one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Acer N141I1-L05 (GLARE). A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Acer N141I1-L05 (GLARE) should contain:
- informations concerning technical data of Acer N141I1-L05 (GLARE)
- name of the manufacturer and a year of construction of the Acer N141I1-L05 (GLARE) item
- rules of operation, control and maintenance of the Acer N141I1-L05 (GLARE) item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Acer N141I1-L05 (GLARE) alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Acer N141I1-L05 (GLARE), and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Acer service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Acer N141I1-L05 (GLARE).
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Acer N141I1-L05 (GLARE) item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Acer TravelMate 3300 Series Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.acer .com.tw[...]
-
Page 2
II Revision History Please refer to the table below for the updates ma de on T ravelMate 3300 service guide. Date Chapter Up dates 2005/12/15 Chapter 1 Add “WFM” to BIOS support protocols on page 23.[...]
-
Page 3
III Copyright Copyright © 2005 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any lan guage or computer languag e, in any form or by any means, electronic, mechanical, magne tic, optical, chemi cal, manual or otherwise, without the[...]
-
Page 4
IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appe ar on screen. NOTE Gives bits and pieces of additional information related to the current topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions. CAUTION Gives precautionary measures to av[...]
-
Page 5
V Preface Before using this information and the product it s upports, please read the fo llowing general info rmation. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGURA TION decided for Acer's "glo bal" product offering. T o better fit local market requirements and enhance prod uct co[...]
-
Page 6
VI[...]
-
Page 7
Chapter 1 1 Features This computer was designed with the user in mind . Here are just a few of its many features: Performance T Intel ® 915GM PCI Express chipset T Intel ® Pentium ® M processor 740/750/7 60/770/780 (2MB L2 cache, 1.60/1 .73/1.86/2/ 2.13/2.26 GHz, 533 MHz FSB) T Intel ® Celeron ® M processor 360/370/38 0 (1MB L2 ca che, 1.40/1.[...]
-
Page 8
2 Chapter 1 T WLAN (optional ): T Integrated Intel ® PRO/Wirele ss 2200BG network connection (dual-band 802.1 1b/g) Wi-Fi CERTIFIED TM solution, supporting Acer Si gnalUp TM wirel ess technology , or T Integrated Acer InviLin k TM 802.1 1b/g Wi-Fi CERTIFIED TM solution, supporting Acer SignalUp TM wirelss technology T WP AN (op tional): Inte grate[...]
-
Page 9
Chapter 1 3 Mainboard Layout Top View 1 Fan Connector (F AN1) 6 5-in-1 Card Reader Slot (CARD1) 2 LCD Cable Connector (LCD1) 7 RTC Battery Connector (RTC1) 3 IEEE 1394 Connector (SKT1) 8 Bluetooth Module Connector (BT1) 4 USB Port (SKT2) 9 T ouchpad FFC Connector (T P AD1) 5 PC Card Slot (PCH1 or U22) 10 Keyboard Connector (KB1)[...]
-
Page 10
4 Chapter 1 Bottom View 1 Giga LAN Port (JK1) 10 Main Board to IO Board Connector (IOB1) 2 Power Jack (DCIN1) 1 1 HDD Connector (HDD 1) 3 VGA Port (CRT1) 12 DIMM Slot (DM2) 4 ezDock Port (DOCK1) 13 DIMM Slot (DM1) 5 IO Controller-PC 87392 (U27) 14 South Bridge-Intel ICH6-M (U44) 6 Wireless LAN Card Slot (WIN1) 15 Switch (SW8) 7 Keyboard Controller [...]
-
Page 11
Chapter 1 5 IO Board Layout Top View 1 Microphone Connector (INTMIC1) 7 Microphone-in Port (MIC1) 2 Cover Switch Cable Connector (LID1) 8 Line-in Port (LINT1) 3 Audio Codec-Realtek ALC655 (U1) 9 USB Port (USB1) 4 IO Board to Main Board Connector (BTB1) 10 USB Port (USB2) 5 S peaker Set Connector (SPKR1) 1 1 FIR (U6) 6 Line-out Port (LOUT1) 12 RJ1 1[...]
-
Page 12
6 Chapter 1 Bottom View 1 Modem Board Connector (MDC 1) 2 MDC Cable Connector (RING1)[...]
-
Page 13
Chapter 1 7 System Block Diagram Title Size Document Number Rev Date: Sheet Myna II SB BLOCK DIAGRAM Custom 14 7 Monday, September 26, 2005 <Core Design> Title Size Document Number Rev Date: Sheet Myna II SB BLOCK DIAGRAM Custom 14 7 Monday, September 26, 2005 <Core Design> Title Size Document Number Rev Date: Sheet Myna II SB BLOCK DIA[...]
-
Page 14
8 Chapter 1 Outlook View A general introduction of ports allow you to connect peripheral devices, as you would with a desktop PC. Front View # Item Description 1 Display screen Also called Liquid-Crystal Display (LCD), displaying computer output. 2 Microphone Internal microphone for sound recording. 3 S tatus indicators Light-Emitting Diodes (LEDs)[...]
-
Page 15
Chapter 1 9 Closed front view Left View # Icon Item Description 1 S peakers Left and right speaker s deliver stereo audio output. 2 Battery indicator Lights up when the battery is being ch arged. 3 Power indicator Lights up when the computer is on. 4 Latch Locks and releases the lid. 5 5-in-1 card reader Accepts Memory S tick, Memory stick Pro, Mul[...]
-
Page 16
10 Chapter 1 NOTE: The positions of the AcerMedia indicator , eject button and e mergency eject hole may differ dependin g on the optical drive module installed. Right View # Item Description 1 Kensington lock slot Connects to a Kensington-compatible 2 Modem (RJ-1 1) port Connects to a phone line. 3 Infrared port Interfaces with infrared devices (e[...]
-
Page 17
Chapter 1 11 Rear View # Icon Item Description 1 PC Card slot eject button Ejects the PC Card from the slot. 2 PC Card slot Connects to one T ype II CardBus PC Card. 3 USB 2.0 po rts Connect to Universal Serial Bus (USB) 2.0 devices (e.g., USB mouse, USB camera). 4 IEEE 1394 port (6-pin) Connects to IEEE 1394 devices. 5 V entilation slots Enable th[...]
-
Page 18
12 Chapter 1 Bottom View # Item Description 1 Battery bay Houses the computer ’s battery pack. 2 Battery lock Locks the battery in position. 3 Cooling fan Helps keep the computer cool. Note: Do not cover or obstruct the opening of the fan. 4 Mini PCI card bay Houses the computer ’s Mimi PCI card. 5 Memory and hard disk bay Houses the computer ?[...]
-
Page 19
Chapter 1 13 Indicators The computer has three easy-to-read stat us i ndicators on the left side of the keyboard, and four on the front pan el . The power , battery an d wireless communiction status indicators are visible even when the LCd displ ay is closed. NOTE: 1. Charging : The light shwos amber when the battery is charging . 2. Fully charged [...]
-
Page 20
14 Chapter 1 Easy-launch buttons Located at the upper-right, above the keyboard are four buttons. These butt on s are called easy-launch buttons. The are: mail, Web Browser , Empowering Key < > and one user-programmable button. Press < > to run the Acer Empowering T echnology . The mail and Web browser buttons are pre-set to email and I[...]
-
Page 21
Chapter 1 15 Touchpad The build-in touchpad is pointing device that senses movement on its surface. This me ans the cursor responds as you move yo ur finger across the surface of the touchpad. The centra l loca tion on the palmrest provides optimum comfort and support. Touchpad Basics Use the touchpad as follows: T Move your finger across the touch[...]
-
Page 22
16 Chapter 1 Drag Click and hold, then use finger on the touchpad to drag the cursor . T ap twice (at the same speed as double-clicking a mouse button); rest your finger on the touchpad on the second tap and drag the cursor . Access context menu Click one. Scroll Click and hold to move up/down/left/ right. Function L ef t button ( 1) Right but ton [...]
-
Page 23
Chapter 1 17 Using the Keyboard The keyboard has full-sized keys and an embedd ed keypad, separate cursor keys, two Windows keys and twelve function keys. Lock Keys and embedded mumeric keypad The keyboard has three lock keys which yo u can toggle on and off. The embedded numeri c keypad functions like a desktop nume ric keypad. It is indicated by [...]
-
Page 24
18 Chapter 1 Hot Keys The computer employs hotkeys or key combinations to access most of the comp uter ’s controls like sreen brightness, volume out put and the BIOS utility . T o activate hot keys, press and hold the < Fn> key before pressing the other key in the hotkey combination. Key Icon Description Windows key Pressed alone, this key [...]
-
Page 25
Chapter 1 19 Special Key Y ou can locate the Euro symbol and US dollar sign at th e upper-cen ter and/or bottom-right o f your keyboard. To t y p e : Fn-F4 Sleep Puts the computer in Sleep mode. Fn-F5 Display toggle Switches display output between the display screen , external monitor (if connected) and bo th. Fn-F6 Screen blank Turns the display s[...]
-
Page 26
20 Chapter 1 The Euro symbol 1. Open a text editor or word processor. 2. Either directly press the <> symbol at the bottom-right of the keyboard, or hold <Alt Gr> and then press the <5> symbol at the upper-cente r of the keyboard. The US dollar sign 1. Open a text editor or word processor. 2. Either directly press the <> key[...]
-
Page 27
Chapter 1 21 Using System Utilities Acer eManager Innovative Acer eManagement so ftware is designed for easy access to frequently used fun ctions. At the press of Acer Empowering Key , the Acer eManager user interface appears, featuring four main settings -- Acer eSetting, Acer ePresentation, Acer ePowerManagement an d Acer eRecovery . Icon Item De[...]
-
Page 28
22 Chapter 1 Launch Manager Launch Manager allows you to set the two launch keys located above the keyboard. Y ou can access the La unch Manager by clicking on St art, All Programs , and then Launch Manager to st art the application. Start All Programs Launch Manager[...]
-
Page 29
Chapter 1 23 Hardware Specificatio ns and Configurations Processor Item Specification CPU type Intel ® Pentium ® M processor 740/750/760/770/78 0 (2MB L2 cache, 1.73/ 1.87/2.0/2.13/2.26 GHz, 533 MHz FSB) Intel ® Celeron ® M processor 360/370/380 (1MB L2 cache, 1.4/1.5 /1.6 GHz, 400 MHz FSB) CPU package CPU on board no socket CPU core voltage De[...]
-
Page 30
24 Chapter 1 . . Memory size 256MB/512MB/1GB DIMM socket number 2 Supports maximum memory size per slot 1024 MB Supports maximum memory size 2GB Supports DIMM type DDRII SDRAM standard Supports DIMM S peed 400/533 MHz Supports DIMM voltage 1.8V Memory module combinations Y ou can install memory modules in any combinations as long as they match the [...]
-
Page 31
Chapter 1 25 Resolution 20 bit stereo Digital to analog converter 18 bit stereo Analog to Ditial converter Compatibility Microsoft PC99/2100, AC97 2.3 & WHQL/WLP2.0 Mixed sound source CD Sampling rate 48 KHz Internal microphone Y es Internal speaker / Quantity Y es / 2 PCMCIA Port Item Specification PCMCIA controller TI PCI 741 1 Supports card [...]
-
Page 32
26 Chapter 1 Number of battery cell 9-cell 6-cell LCD 14.1” WXGA Item Specification V endor & model name CMO: N141I1-L07 (non glare) N141I1-L05 (glare) N141C1-L02 (WXGA+) QDI QD14TL0102 Hydis HT141WX1-100 Screen Diagonal (mm) 358.14 358.14 358.14 Active Area (mm) 303 .36x189.6 303.48x189.675(for WXGA+) 303.7x189.8 303.36x189.6 Display resolut[...]
-
Page 33
Chapter 1 27 AC Adapter Item Specification V endor & model name LITEON P A- 1650-02WR (3pin, 65W) LISHIN SLS0335A19A54LF (3pin, 65W) Input Requirements Maximum input current (A, @100V ac, full load) 1.8A max@3.5A/100V ac and 240 V ac Nominal frequency (Hz) 47 - 63 Frequency variation range (Hz) 47 - 63 Nominal voltages (V rms) 90 - 264 Inrush c[...]
-
Page 34
28 Chapter 1 Sleeping St ate (S4) Also called Hibernate state. Sy stem saves all system st ates and data onto the disk prior to power off the whole system. Dimensions and Weight Item Details Deminsions 330( W) x 240(D) x 23/31.3(H ) mm (12.9 x 9.45 x 10.91/1.23 inches) Weight 1.9Kg (4.23 lbs) Environmental Requirements Item Specification T emperatu[...]
-
Page 35
Chapter 2 29 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is already prope rly configured and optim ized, and you do not need to run this utility . However , if you encounter confi guration problems, you may need to run Setup. Please a[...]
-
Page 36
30 Chapter 2 Information Parameter Description CPU T ype This field displays the system CPU type. CPU S peed This field displays the CPU speed of the system. IDE1 Model Name This item will show the Model name of HDD installed on Primary IDE master . The hard disk model name is automatically detected by the system. If there is no hard disk pr esent [...]
-
Page 37
Chapter 2 31 Asset T ag Number This item will show the Asset T a g number of the system. Product Name This field will show product name. Manufacturer Name This fi eld will show manufacture r name. UUID This will be visible only when there i s an internal LAN d evice present. Parameter Description[...]
-
Page 38
32 Chapter 2 Main This menu provides you th e information of the system. Parameter Description System T ime / System Date The hours are displayed with 24 hours format. The values set in these tw o fields take ef fect immediately . System Memory This field reports the memory size of system base me mory . The size is fixed to 640KB. Extended Memory T[...]
-
Page 39
Chapter 2 33 F12 Boot Menu When this is selected, users can m odify device boot priority by pressing F12 key during POST . When this is not selecte d, device boot priority wil l not be adjustable during POST . D2D Recovery Allow user to enable/disable the Disk-to -Disk recovery Parameter Description[...]
-
Page 40
34 Chapter 2 Advanced The Advanced screen contains parameters in volving your hardware devices. It also provides advanced settings of the system. The table below describes the parameters in the screen. Settings in boldface are the default and suggested parameter settings. Description Option Serial port A Configure serial port A using options: [Disa[...]
-
Page 41
Chapter 2 35 Infrared Po rt Configure serial port B u sing optio ns: [Disabled]: No configuration [Enabled]: User configuration [Auto]: B IOS or OS ch ooses configur ation (OS Controlled) Displayedd when controlled by OS Disabled Enabled Auto Parallel port Configure serial port B using options: [Disabled]: No configuration [Enabled]: User configura[...]
-
Page 42
36 Chapter 2 Security The Security screen contains parameters that he lp safeguard and protect your computer from unauthorized use. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter Description Option Supervisor Password Is N/A N/A User Password Is N/A N/A HDD P[...]
-
Page 43
Chapter 2 37 Set Supervisor/User Password If password on boot is required, the passwor d must be set otherwise it canno t be enabled. The formats of the password are as follows: Length No more than 8 characters Characters 0-9,A-Z (n ot case sensitive) While these fields are highlighted and press “Ente r”, a window similar to the following is sh[...]
-
Page 44
38 Chapter 2 User can now type password in field “Enter New Password”, and re-enter password in field “Confirm New Password” for verification. If the verification is OK: The password setting is complete after user presses enter . If the current password ent ered does not match the actual current password: If the new password and confirm new[...]
-
Page 45
Chapter 2 39 Boot This menu allows the user to decide the order of boot device s to load the operating system. Boo table devices includes the di stette drive in mod ule bay , the onboard hard disk drive and the CD-ROM in module bay and onboard LAN device. . Parameter Description +Hard Drive + and - indicate device categories. Use <Enter> to e[...]
-
Page 46
40 Chapter 2 Exit The Exit screen contains parameters that help safegua rd and protect your computer from unauthorized use. The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setup and save your changes to CMOS Exit Discarding Changes Exit utility without saving Setup data to CMOS Load Set[...]
-
Page 47
Chapter 3 41 This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting . T o disassemble the computer , you need the follow ing tools: T Wrist grounding strap and conductive mat for preventing electrostatic discharge T Small Philips screw driver T Philips screwdriver T Plastic fl[...]
-
Page 48
42 Chapter 3 General Information Before You Begin Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system. 3. Remove the battery pack.[...]
-
Page 49
Chapter 3 43 Disassembly Procedure Flowchart The flowchart on the succeed ing page gives you a graphic represen tation on the entire disassembly sequen ce and instructs you on the components that need to be remo ved during servicing . For example, if you want to remove the system board, you must fi rst rem ove the keyboard, then disassemble the ins[...]
-
Page 50
44 Chapter 3 Screw List Item Description SCREW M2.0X3.0-I-NI- NYLOK 86.A03V7.012 SCREW I2.5*3M- BNIH(M2.5L3) 86.T25V7.012 SCREW M2.5*4L-BZN- NYLOK 86.A03V7.006 SCREW M2.0X5-I-NI- NYLOK 86.T23V7.006 SCREW MM25060IL69 86.A08V7.004 SCREW M2.0*5- I(NI)(NYLOK) 86.T23V7.010 SCREW M2.0X2.5-I-NI- NYLOK 86.A03V7.007 SCREW I2*3M-NIHY (M2L3) 86.T25V7.008 SCRE[...]
-
Page 51
Chapter 3 45 Removing the Battery Pack 1. Release the battery lock. 2. Slide the battery latch as shown then remove the battery pack.[...]
-
Page 52
46 Chapter 3 Removing the Wireless LAN Card/the memory and the HDD Module and the LCD Module Removing the Wi reless LAN Card 1. Remove the screw fasten ing the min i PCI cover . 2. Detach teh mini PCI cover . 3. Disconnect the main and the auxiliary wireless antenna . 4. Pop out the wireless LAN card then remove it. Removing the Memory and the HDD [...]
-
Page 53
Chapter 3 47 . Removing the LCD Module 1. Open the notebook as shown. 2. Detach the middle cover from the main unit. 3. Remove the two screws that secure the keyboard. 4. T urn over the keyboard as shown. 5. Disconnect the keyboard cable then remove the keyboard. 6. T ear off the tape fastening the wireless an tenna , then pu ll out the antenna fro[...]
-
Page 54
48 Chapter 3 10. Then remove two screws fastening the LCD module. 11 . Detach the LCD module from the main unit carefu lly .[...]
-
Page 55
Chapter 3 49 Disassembling the Main Unit Separate the Main Unit Into the Upper and the Lower Case Assembly 1. Disconnect the touchpad FFC from the main board. 2. Disconnect the system fan cable from the main board. 3. Remove one screw fastening the upper a nd the low er case assembly as shwon. 4. Remove 15 screws fastenin g the upper and the lower [...]
-
Page 56
50 Chapter 3 5. Disconnect the microphone cablem from the IO board then detach the micro phone. 6. Disconnect the Lid switch ca ble from the IO board as shown. 7. Remove the four screws fastening the mian board to the lower case. 8. Remove two screws fastening the IO board and one screw holdi ng the modem board. 9. Detach the IO board from the lowe[...]
-
Page 57
Chapter 3 51 18. Disconnect the modem board fro m the IO board. 19. Disconnect the modem board cable from the modem board. Disassembling the Up per Case Assembly 1. Disconnect the touchpad FFC from the touchpad then remove it. 2. Remove the five screws fastening the touchpad plate. 3. Detach the scroll key rubber from the touchpad plate. 4. Remove [...]
-
Page 58
52 Chapter 3 Disassembling the LCD Module 1. Remove the four screw caps as shown. 2. Remove the four screws holding the LCD bezel. 3. Then detach the LCD bezel from the LCD module. 4. Remove the two screws fastening the inverter . 5. T ake the inverter out of the LCD panel then disconnect the LCD cable. 6. Disconeect the LCD inverter cable on the o[...]
-
Page 59
Chapter 3 53 13. Remove the four screws fastening the LCD right bracket. 14. Detach the LCD right bracket from the LCD. 15. Remove the four screws fastening the LCD left bracket. 16. Detach the LCD left bracket from the LCD. 17. T ear off the t ape fastening the LCD cable then disconnect the LCD cable.[...]
-
Page 60
54 Chapter 3 Disassembling the External Modules Disassembling the HDD Module 1. Detach the HDD sponge. 2. T urn over the HDD module. 3. T ear off the HDD module copper (sh ielding). 4. Then detach the HDD from the HDD copper (shielding) as shown.[...]
-
Page 61
Chapter 4 55 Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses. 1. Obtain the failing symptoms in as much detail as possible. 2. V erify the symptoms by attempt[...]
-
Page 62
56 Chapter 4 System Check Procedures External Diskette Drive Check Do the following to isolate the problem to a controller, dr iver , or diskette. A write-ena bled, diagnostic diskette is required. NOTE: Make sure that the diskette does not have more than on e label attached to it. Multiple labels can cause damage to the dri ve or cause the drive t[...]
-
Page 63
Chapter 4 57 Memory check Memory errors might stop system operations, show error messages on the screen, or hang the system. 1. Boot from the diagnostics diskette and start the doa gmpstotics prog ram (please refer to mai n board. 2. Go to the dia gnostic memory in the test items. 3. Press F2 in the test items. 4. Follow the instruction s in the me[...]
-
Page 64
58 Chapter 4 4. This helps you identify first the prob lem is on recharging or discharging. From Hardware: 1. Power off the computer . 2. Remove the battery pack and measure the voltage between battery terminal s 1(+) and 6(ground ). See the following figure 3. If the voltage is still less than 7.5 Vdc after recharging, replace the battery . T o ch[...]
-
Page 65
Chapter 4 59 Power-on Self-Tes t Error Messages The POST error message index lists the error message and their possible causes. The most like ly cause is listed first. NOTE: Perform the FRU replacement or actions in the s equence shown in FRU/Action column, if the FRU replacement does not solve the proble m, put the ori ginal part back in the compu[...]
-
Page 66
60 Chapter 4 Index of Error Messages Error Code List Error Codes Error Messages 006 Equipment Configuration Error Causes: 1. CPU BIOS Update Code Mismatch 2. IDE Primary Channel Master Drive Err or (THe causes will be shown before “Equipment Configuration Error”) 010 Memory Error at xxxx:xxxx:xxxx h (R:xxxxh, W:xx xxh) 070 Real T ime Clock Erro[...]
-
Page 67
Chapter 4 61 Real time clock error RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board Previous boot incomplete - Default configuration used Run “Load Default Settings” in BIOS Setup Utility . RTC battery System board Memory size found by POST differed from CMOS Run “Load Default Settings” in BIOS[...]
-
Page 68
62 Chapter 4 Error Message List No beep Error Messages FRU/Action in Sequence No beep, power-on indicator turns off and LCD is blank. Power source (battery pack and power adapter). See “Power System Check” on page 65. Ensure every connector is connected tig htly and correctly . Reconnect the DIMM. LED board. System board. No beep, power-on indi[...]
-
Page 69
Chapter 4 63 Phoenix BIOS Beep Codes Code Beeps POST Routine Description 02h V erify R eal Mode 03h Disable Non-Maskable Interru pt (NMI) 04h Get CPU type 06h Initialize system hardware 08h Initialize chipset with i nitial POST values 09h Set IN POST flag 0Ah Initialize CPU registers 0Bh Enable CPU cache 0Ch Initialize caches to initial POST values[...]
-
Page 70
64 Chapter 4 48h Check video configuration against CMOS 49h Initialize PCI bus and devices 4Ah Initialize all video adapters in system 4Bh QuietBoot start (optional) 4Ch Shadow video BIOS ROM 4Eh Display BIOS copyright notice 50h Display CPU type and speed 51h Initialize EISA board 52h T est keyboard 54h Set key click if enabled 58h 2-2-3-1 T est f[...]
-
Page 71
Chapter 4 65 8Fh Determine number of A T A drives (optional) 90h Initialize hard-disk controllers 91h Initialize local-bus hard-disk controllers 92h Jump to UserPatch2 93h Build MPT ABLE for multi-processor boards 95h Install CD ROM for boot 96h Clear huge ES segment register 97h Fixup Multi Processor table 98h 1-2 Search for option ROMs. One long,[...]
-
Page 72
66 Chapter 4 E0h Initialize the chipset E1h Initialize the bridge E2h Initialize the CPU E3h Initialize the system timer E4h Initialize system I/O E5h Check force recovery boot E6h Checksum BIOS ROM E7h Go to BIOS E8h Set Huge Segment E9h Initialize Mu lti Processor EAh Initialize OEM special code EBh Initialize PIC and DMA ECh Initialize Memory ty[...]
-
Page 73
Chapter 4 67 Index of Symptom-to-FRU Error Message LCD-Related Symptoms Symptom / Error Action in Sequence LCD backlight doesn't work LCD is too dark LCD brightness cannot be adjusted LCD contrast cannot be adjusted Enter BIOS Utility to execute “Load Setup Default Settings”, the n reboot system. Reconnect the LCD connectors. Keyboard (if [...]
-
Page 74
68 Chapter 4 PCMCIA-Related Symptom s Symptom / Error Action in Sequence System cannot detect the PC Card (PCMCIA) PCMCIA slot assembly System board PCMCIA slot pin is damaged. PCMCIA slot assembly Memory-Related Symptoms Symptom / Error Action in Sequence Memory count (size) appears different from actual size. Enter BIOS Setup Utility to execute ?[...]
-
Page 75
Chapter 4 69 NOTE: If you cannot find a symptom or an error in this list and the problem remains, see “Undete rmined Problems” on page 79. System hangs intermittently . Reconnect hard disk/CD-ROM drives. Hard disk connection board System board Peripheral-Related Symptom s Symptom / Error Action in Sequence System configuration does not match th[...]
-
Page 76
70 Chapter 4 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons th at have nothing to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists. When analyzing an intermittent prob lem, do t[...]
-
Page 77
Chapter 4 71 Undetermined Problems The diagnostic proble ms does not identify wh ich adapter or device failed, which in stalled devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedure s to isolate the fail i ng FRU (do not isolate non-defective FRU). NOTE: V erify that all attached d[...]
-
Page 78
72 Chapter 4[...]
-
Page 79
Chapter 5 73 Mainboard Layout Top View 1 F AN1 Fan Connector 6 CARD1 5-in-1 Card Reader Slot 2 LCD1 LCD Cable Connector 7 RTC1 RTC Batter y Connector 3 SKT1 IEEE 1394 Connector 8 BT1 Bluet ooth Module Connector 4 SKT2 USB Port 9 TP AD1 T ouchpad FFC Connect or 5 U22 or PCH1? ?) PC Card Slot 10 KB1 Keyboard Connector Jumper and Connector Locations C[...]
-
Page 80
74 Chapter 5 Bottom View 1 JK1 Giga LAN Port 10 IOB1 Main Board to IO Board Connector 2 DCIN1 Power Jack 1 1 HDD1 HDD Connector 3 CRT1 VGA Port 12 DM2 DIMM Slot 4D O C K 1 ezDock Port 13 DM1 DIMM Slot 5 U27 IO Cont roller-PC 87392 14 U44 South Bridge-Inte l ICH6-M 6 WIN1 Wireless LAN Card Slot 15 SW8 S witch 7 U32 Keyboard Controller 16 U52 Cardbus[...]
-
Page 81
Chapter 5 75 IO Board Layout Top View 1 INTMIC1 Microphone Connector 7 MIC1 Microphone-in Port 2 LID1 Cover Switch Cable Connector 8 LINT1 Line-in Port 3 U1 Audio Codec-Re altek ALC655 9 USB1 USB Po rt 4 BTB1 IO Board to Main Board Connector 10 USB2 USB Port 5 SPKR1 Speaker Set Connector 1 1 U6 FIR 6 LOUT1 Line-out Port 12 JK1 RJ1 1 Modem Jack[...]
-
Page 82
76 Chapter 5 Bottom View 1 MDC1 Modem Board Connector 2 RING1 MDC Cable Connector[...]
-
Page 83
Chapter 5 77 Switch Settings Please see the bottom view of the main board layou t for switch location. The image bleow is switch enlarged image. Switch Settings Switch Function SW8-1 Clear Passwor d SW8-2 Bootblock SW8-3 Keyboard Matrix ID1 SW8-4 Keyboard Matrix ID2[...]
-
Page 84
78 Chapter 5[...]
-
Page 85
Chapter 6 79 T h is c h apter gives you the F R U ( F ie l d R epl a c eab l e Unit) listing in g lob a l c o nfig u r a t i ons of T r av e lMate 3300 . Refer to this chapter whenever orderi ng for parts to repair or for RMA (Return Merchandise Authorization). Please note that WHEN ORDERING FRU P ARTS, you should check the most up-to-da te informa[...]
-
Page 86
80 Chapter 6 Exploded Diagram Image Part Name Description Acer P/N ADAPTER ADAPTER 65W LITEON P A-1650- 02WR ADT 65W LITEON P A- 1650-02WR AP .06503.01 1 ADAPTER 65W LISHIN SLS0335A19A54LF ADT 65W LISHIN SLS0335A19A54LF AP .06506.003 BA TTERY BA TTERY P ACK LI + 6CELL 2.4MAH SONY BTY P ACK LI+ 6C 2.4AH SONY BT .00604.005[...]
-
Page 87
81 BA TTERY P ACK LI + 6CELL 2.4MAH SANYO BTY P ACK LI+ 6C 2.4AH SANYO BT .00603.012 BA TTERY P ACK LI + 9CELL 2.4MAH SANYO BTY P ACK LI+ 9C 2.4AH SANYO BT .00903.004 BOARD MODEM BOARD FOXCONN T60M845.01 MODEM MDC1.5 (AC97) T60M845.01 54.A56V1.001 TOUCHP AD BOARD SYNAPTIC TM51-389 TOUCHP AD SYNAPTICS TM51-389 56.TB1V1.001 WIRELESS LAN BOARD 802.1 1[...]
-
Page 88
82 Chapter 6 MODEM CABLE CABLE MODEM US W/ RECYCLE 50.TB1V1.002 TOUCHP AD CABLE C.A. T/P FFC JH MYNA2 50.TB1V1.003 POWER CODE 5A 250V 3P UK BK CODE 5A 250V 3P UK BK 27.031 18.001 POWER CORD 2 .5A 125V USA CORD USA/W CNS 2.5A 125V 8121- 27.01518.781 BL YETOOTH CABLE B/T CABLE HT MYNA-2 50.TB1V1.010 CASE/COVER/BRACKET ASSEMBL Y PCMCIA DUMMY CARD CARD[...]
-
Page 89
83 TOUCHP AD PLA TE ASSY T/P PLA TE MYNA2 33.TB1V1.001 LOWER CASE ASSY L-CASE FOR CARD BUS MYNA2 60.TB1V1.001 SPEAKER LEFT/ RIGHT SPEAKER MYNA-2 23.TB1V1.001 MICROPHONE MICROPHONE MYNA2 23.TB1V1.002 COVER SWITCH CABLE C.A. COVER SWITCH MYNA2 50.TB1V1.001 FRONT COVER ASSY FRONT COVER MYNA2 60.TB1V1.004 MIDDLE COVER ASSY MIDDLE COVER MYNA2 60.TB1V1.0[...]
-
Page 90
84 Chapter 6 HDD COVER ASSY HDD COVER MYNA2 42.TB1V1.001 MINI PCI COVER ASSY MINIPCI COVER MYNA-2 42.TB1V1.002 COMBO MODULE COMBO 24X P ANASONIC UJDA770 COMBO 24X P AC/ UJDA770 MYNA EXT KO.02406.014 COMBO 24X LITEON SOSC-2483K COMBO LIT/SOSC- 2483K LF EXT KO.02409.014 COMMUNICA TION MODULE WIRELESS ANTENNA LEFT/RIGHT ANTENNA CABLE MYNA2 25.TB1V1.00[...]
-
Page 91
85 DVD-RW DRIVE 8X P ANASONIC UJ-840B DUAL DUAL P AN/UJ-840B LF 8X DVD KU.00807.030 FA N F AN F AN FORCECON MORAR 23.A74V1.001 HDD MODULE HDD MODULE 40G HDD MOD ULE 40G TBD HDD MYLAR W/ CUPPER ASSY HDD CHASSIS MYNA-2 33.TB1V1.002 HDD 40G HIT ACHI HTS421240H9A T00 HDD 40GB HGST HTS421240H9A T00 KH.04007.013 HDD 40G TOSHIBA MK4025GAS HDD 40GB TOSHIBA[...]
-
Page 92
86 Chapter 6 HDD MYLAR W/ CUPPER ASSY HDD CHASSIS MYNA-2 33.TB1V1.002 HDD 100G HIT ACHI HTS421210H9A T00 HDD 100GB HGST HTS421210H9A T00 KH.10007.002 HDD 100G TOSHIBA MK1031GAS HDD 100GB TOSHIBA MK1031GAS KH.10004.001 HDD 100GB SEAGA TE ST9100825A HDD 100GB SEAGA TE ST9100825A KH.10001.003 KEYBOARD KEYBOARD 88KEY DARFON NSK-AEN1D US-INT KB DARFON N[...]
-
Page 93
87 TM3300 KEYBOARD DANISH TM3300 KEYBOARD DANISH KB.TB107.019 TM3300 KEYBOARD TURKISH TM3300 KEYBOARD TURKISH KB.TB107.020 TM3300 KEYBOARD TURKISH F TYPE TM3300 KEYBOARD TURKISH F TYPE KB.TB107.021 TM3300 KEYBOARD CANADIAN FRENCH TM3300 KEYBOARD CANADIAN FRENCH KB.TB107.022 TM3300 KEYBOARD JAP ANESE TM3300 KEYBOARD JAP ANESE KB.TB107.023 TM3300 KEY[...]
-
Page 94
88 Chapter 6 LCD BRACKET LEFT BRKT LCD 14.1" L MYNA2 33.TB1V1.004 LCD BEZEL 14.1" ASSY LCD 14.1" BEZEL MYNA-2 60.TB1V1.005 LCD P ANEL 14.1" ASSY LCD 14.1" P ANEL MYNA-2 60.TB1V1.006 HINGE P ACK LEFT/ RIGHT HINGE P ACK LEFT/ RIGHT 6K.TB1V1.001 LCD 14.1" WXGA N141I1-L05 GLARE 400G LCD 14" WXGA N141I1-L05 LK.1410D.00[...]
-
Page 95
89 LCD BEZEL 14.1" ASSY LCD 14.1" BEZEL MYNA-2 60.TB1V1.005 LCD P ANEL 14.1" ASSY LCD 14.1" P ANEL MYNA-2 60.TB1V1.006 HINGE P ACK LEFT/ RIGHT HINGE P ACK LEFT/ RIGHT 6K.TB1V1.001 LCD 14.1" WXGA N141C1-L02 GLARE 420G LCD 14.1" WXGA N141C1-L02 LK.1410D.008 LCD MODULE 14.1" WXGA NONE GLARE 400G ASSY QDI 14.1" W[...]
-
Page 96
90 Chapter 6 LCD 14.1" WXGA QDI QD14TL01-02 NONE GLARE 420G LCD 14.1" WXGA QD14TL01-02 LK.14109.005 LCD 14.1" WXGA QDI QD14TL01-03 NONE GLARE 420G LCD 14" WXGA QDIQD14TL01-03 LK.14109.004 MAIN BOARD MAINBOARD MYNA 2 1.4G 1.73 MHZ(CPU ON BOARD) W/CPU HEA TSINK & PCMCIA SLOT & RTC BA TTERY MB PM740 MYNA2 W/ O DIMM LB.TB101[...]
-
Page 97
91 SDIMM SAMSUNG M470T3354CZ3-CD5 Samsung M470T3354CZ3-CD5 KN.2560B.016 SDIMM 512M NANY A NT512T64UH8A1FN- 37B SODIMM512M NT512T64UH8A1FN- 37B KN.51203.023 SDIMM 512M SAMSUNG M470T6554CZ3-CD5 SODIMM 512M M470T6554CZ3-CD5 KN.5120B.015 SDIMM 512M HYNIX HYMP564S64P6-C4 SODIMM 512M HYMP564S64P6-C4 KN.5120G .005 LCD SCREW RUBBER RUB LCD RUBBER CUSHION B[...]
-
Page 98
92 Chapter 6 SCREW SCW HEX NYL I#R-40/ O#4-40 L5.9 34.4C210.001 SCREW SCREW MACH W AFER M2*L4 NI 86.T39V1.002 SCREW SCREW M2*L9 NYLOK 86.00D 38.520 SCREW SCRW WH MS+CBZ M2.5+L4 BLACK 86.9A323.4R0 SCREW SCREW M2.5-6 86.9A323.6R0 SCREW SCREW M2*3 NYLON 1JMCPC-420325 86.9A352.3R0 SCREW SCREW M2.5*4L(NYLOCK)BLA CK ZN 86.9A353.4R0 SCREW SCREW M2.5X6 86.[...]