Go to page of
Similar user manuals
-
Projector
Acer P1266N
58 pages 4.81 mb -
Projector
Acer P1165P
66 pages 4.96 mb -
Projector
Acer XD1150D
45 pages 6.66 mb -
Projector
Acer 1100E
161 pages 1.3 mb -
Projector
Acer PD527 series
56 pages 8.03 mb -
Projector
Acer P7280i Series
61 pages 4.78 mb -
Projector
Acer P7270i
61 pages 4.78 mb -
Projector
Acer T111E
65 pages 3.61 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Acer P3150 REFRESH, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Acer P3150 REFRESH one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Acer P3150 REFRESH. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Acer P3150 REFRESH should contain:
- informations concerning technical data of Acer P3150 REFRESH
- name of the manufacturer and a year of construction of the Acer P3150 REFRESH item
- rules of operation, control and maintenance of the Acer P3150 REFRESH item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Acer P3150 REFRESH alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Acer P3150 REFRESH, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Acer service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Acer P3150 REFRESH.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Acer P3150 REFRESH item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
SER VICE MANUAL Prepared: Checked: Approved: Date Revise V ersion Description 2008.4.10 V1.0 Initial Issue 2008.5.28 V2.0 Add Marketing Spec in Chapter 1 2008.7.22 V3.0 Add P3150 Refresh/P3250 Refresh 2008.10.10 V4.0 Add W aveform Download in Ch5 modify Ch4, Ch6 and AppendixB 2010.02.26 V5.0 Add P3251 P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 C[...]
-
Page 2
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential I Comparison List P ART P3251 P3150 P3150 refresh P3250 P3250 refresh F AN 49.8FN01G001 49.89S01G001 ENGINE 70.8GC07GR01 70.89Y22GR01 PHOTO SENSOR BD 80.8GB04G001 80.88N04G001 COLOR WHEEL 70.8GC08GR01 70.89Y21GR01 DMD BD 80.8FN02G001 80.89S02G001 DMD CHIP 48.8CQ01G003 48.87K01G001 48.87M01[...]
-
Page 3
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential II Preface This manual is applied to P3150/P3250/P3150 refresh/P3250 refresh/P3251 projection system. The manual gives you a brief description of basic technical information to help in service and maintain the product. Y our customers will appreciate the quick response time when you immedi[...]
-
Page 4
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential III T able of Content Chapter 1 Introduction Highlight 1-1 Compatible Mode 1-4 Product Overview 1-6 Chapter 2 Disassembly Process Equipment Needed & Product Overview 2-1 Disassemble Lamp Cover Module 2-2 Disassemble Lamp Module 2-3 Disassemble T op Cover Module 2-4 Disassemble Key Pad [...]
-
Page 5
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential IV Re-write Lamp Usage Hour 2-19 Assemble IR Sensor Module 2-20 Assemble Interrupt Switch Module 2-20 Assemble Speaker Module 2-21 Assemble DMD Board and DMD Chip Module 2-22 Assemble Engine Module 2-22 Assemble Lamp to Ballast Module 2-23 Assemble Lamp Blower and System Fan Module 2-24 As[...]
-
Page 6
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential V OSD Reset 4-1 T est Condition 4-2 T est Inspection Procedure 4-4 PC Mode 4-4 Video Performance 4-7 Optical Performance Measure 4-9 SD Card /USB T est (only for P3251) 4-1 1 Other 4-12 Chapter 5 Firmware Upgrade Section 1: System Firmware Updategrade 5-1 Equipment Needed 5-1 DLP Composer [...]
-
Page 7
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential VI Chapter 6 EDID Upgrade EDID Introduction 6-1 Equipment Needed 6-2 Setup Procedure 6-3 EDID Key-In Procedure 6-3 Setup Procedure (HDMI) 6-7 Default Language Reset 6-9 Appendix A P3150/P3250 Exploaded Overview I Appendix B Serial Number System Denition I PCBA Code Denition II[...]
-
Page 8
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-1 Chapter 1 Introduction 1-1 Highlight No Item Description 1 Dimensions (WxDxH) - 209 x 74.2 x 172.2 mm (for P3150/P3250/P3150 Refresh/ P3250 Refresh) - 209 x 64 x 164mm (for P3251) 2 Weight - 1.24 kg 3 T ilt Angle - 7 degree with elevator mechanism 4 Keystone correction - +/ -40 degree [...]
-
Page 9
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-2 No Item Description 12 Throw Distance - 1.0m – 12m 13 Throw Ratio - 1.95 – 2.15:1 @ 60” 14 Input signal spec - Video Signal RGB (PC) ● Analog RGB 0.7Vp-p, 75 ohm, Separate TTL H,V Sync ● Analog RGB 1Vp-p, 75 ohm, Sync. On Green signal ● Analog RGB 0.7Vp-p, 75 ohm, Composite[...]
-
Page 10
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-3 No Item Description 17 Contrast P3150/P3250/P3150 refresh/P3250 refresh : - Engineering Spec: ● 1400 : 1 Full White and Black (Minimum Full power mode) 1400 : 1 Full White and Black (Minimum Full power mode) ● 1800 : 1 Full White and Black (T ypical Full power mode) 1800 :[...]
-
Page 11
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-4 1-2 Compatible Mode A. Analog (for P3150/P3250/P3150 Refresh/P3250 Refresh) Compatibility Resolution V -Sync [Hz] H-Sync [KHz] VGA 640x480 60 31.50 640x480 72 37.90 640x480 75 37.50 720x400 70 31.50 SVGA 800x600 56 35.20 800x600 60 37.90 800x600 72 48.10 800x600 75 46.90 832x624 75 49.[...]
-
Page 12
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-5 Compatibility Resolution V -Sync [Hz] H-Sync [KHz] VGA 640x480 60 31.50 640x480 72 37.90 640x480 75 37.50 720x400 70 31.50 SVGA 800x600 56 35.20 800x600 60 37.90 800x600 72 48.10 800x600 75 46.90 832x624 75 49.73 XGA 1024x768 60 48.40 1024x768 70 56.50 1024x768 75 60.00 SXGA 1 152x864 [...]
-
Page 13
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-6 1-3 Product Overview Projector Outlook (P3150) Front /Upper side Item Description Item Description 1 Zoom Lever 6 Elevator button 2 Focus ring 7 Remote control receivers 3 Zoom lens 8 Control panel 4 Elevator foot 5 Lens cap[...]
-
Page 14
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-7 Rear side (for P3150/P3250/P3150 Refresh/P3250 Refresh) Item Description Item Description 1 USB connector 5 S-V ideo input connector 2 PC analog signal/HDTV/component video input connector 6 Audio input connector 3 HDMI connector 7 Power socket 4 Composite video input connector 8 Kensi[...]
-
Page 15
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-8 Rear side (for P3251) Item Description Item Description 1 SD Card reader 6 S-Video input connector 2 USB A connector 7 Audio input connector 3 PC analog signal/HDTV/component video input connector 8 USB control connector 4 HDMI connector 9 Power socket 5 Composite video input connector[...]
-
Page 16
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-9 Control Panel Item Function Description 1 LAMP Lamp Indicator LED 2 TEMP T emp Indicator LED 3 SOURCE Press “SOURCE” to choose RGB, S-Video,Composite and HDMI™ sources. 4 Empowering key Unique Acer functions: eOpening, eView ,eT imer . 5 RES�NC Automatically synchronizes the pr[...]
-
Page 17
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-10 Remote Control Layout (for P3150/P3250/P3150 Refresh/P3250 Refresh)[...]
-
Page 18
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-1 1 Item Icon Function Description 1 Infrared transmitter Sends signals to the projector . 2 Laser pointer Aim the remote at the viewing screen 3 FREEZE T o pause the screen image. 4 HIDE Momentarily turns off the video. Press “HIDE” to hide the image, press again to display the imag[...]
-
Page 19
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-12 Item Icon Function Description 26 WIRELESS Press “WIRELESS” to display the image which is wirelessly transmitted from the PC to the projector via the “Acer eProjection Management” utility . (for wireless model) 27 KeyPad 0~9 Press “0~9” to input a password in the “Securi[...]
-
Page 20
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-13 Item Icon Function Description 1 Infrared transmitter Sends signals to the projector . 2# Laser pointer Aim the remote at the viewing screen 3 FREEZE T o pause the screen image. 4 HIDE Momentarily turns off the video. Press “HIDE” to hide the image, press again to display the imag[...]
-
Page 21
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-14 Item Icon Function Description 24 * HDMI™/DVI Press “HDMI™/DVI” to change source to HDMI™. 25 USB B No USB B function. 26 LAN/WiFi No LAN/WiFi function. 27 KeyPad 0~9 Press “0~9” to input a password in the “Security settings”. 28 Four directional select keys Use up, [...]
-
Page 22
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-15 Connecting the Projector Item Description Item Description 1 Power cord 5 Audio cable Jack/Jack 2 USB cable 6 HDMI cable 3 VGA cable 7 S-Video cable 4 Composite video cable 8 Audio cable Jack/RCA Note: T o ensure the projector works well with your computer ,please makesure the timing [...]
-
Page 23
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-16 System Block Diagram[...]
-
Page 24
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1-17 Bottom Cover Dimension[...]
-
Page 25
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-1 Chapter 2 Disassembly& Assembly Process 2-1 Equipment Needed & Product Overview 1. Screw Bit (+) :107 2. Hex Sleeves 5mm 3. Long Nose Nipper 4. Screw Bit (+) :102 5. Hex Sleeves 7mm 6. T weezers 7. P3150/P3250/P3150 refresh/P3250 refresh/P3251 unit * Before you start: This proc[...]
-
Page 26
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-2 2-2 Disassemble Lamp Cover Module 1. T urn over the projector 2. Unscrew 2 screws (as red circle) 3. Disassemble the Lamp Cover Module[...]
-
Page 27
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-3 2-3 Disassemble Lamp Module 1. Unscrew 2 screws (as red circle) 2. Disassemble Lamp Module[...]
-
Page 28
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-4 2-4 Disassemble T op Cover Module 1. Unscrew 5 screws (as red circle) 2. Unscrew 2 Hex screws (as yellow circle) 3. Unplug 1 FPC cable (as red square) 4. Disassemble T op cover[...]
-
Page 29
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-5 2-5 Disassemble Key Pad Board Module 1. Unscrew 4 screws (as red circle) 2. Separate Key Pad Button and Key Pad Board 2-6 Disassemble Zoom Ring Module 1. Unscrew 3 screws (as yellow circle) 2. Disassemble Zoom Ring Module 3. Release 2 tenons to outward (as red square) 4. Separate Zoom [...]
-
Page 30
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-6 2-7 Disassemble Main Board Module 1. T ear off 2 Mylars (as red square) 2. Unplug 5 connectors (as green square) 3. Push Main Board Module (as red arrow) to unplug 1 connector (as yellow square) 4. Unplug 6 connectors (as orange square)[...]
-
Page 31
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-7 5. Disassemble Main Board Module 6. Unscrew 2 screws(as red circle) to disassemble the Daughter Board. (only for P3251)[...]
-
Page 32
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-8 A A 2-8 Disassemble Color Wheel Module 1. Unscrew 2 screws (as red circle) 2. Disassemble Color Wheel Module 3. Unscrew 1 screw (as yellow circle) 4. Disassemble Photo Sensor Board[...]
-
Page 33
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-9 2-9 Disassemble Front Cover Module 1. Release 6 tenons (as red circle) 2. Push the front cover forward to disassemble front cover module D C B A A D C B[...]
-
Page 34
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-10 2-10 Disassemble Ballast Module 1. Unplug 2 cables (as red square) 2. Unscrew 3 screws (as red circle) 3. Disassemble AC Inlet Bracket 4. Unscrew 3 screws (as yellow circle) 5. Disassemble Ballast Module 6. T ear off 1 Mylar[...]
-
Page 35
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-1 1 2-1 1 Disassemble DC-DC Module 1. Unscrew 1 screw (as red circle) 2. Disassemble DC-DC Module 3. Unplug 2 cables (as red square)[...]
-
Page 36
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-12 2-12 Disassemble Thermal Switch Module 1. Unscrew 1 screw (as red circle) 2. Disassemble Thermal Switch[...]
-
Page 37
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-13 2-13 Disassemble Lamp Blower Module and System Fan Module 1. Unscrew 4 screws (as red circle) 2. Disassemble Lamp Blower Module and System Fan Module 3. Unscrew 3 screws (as yellow circle) 4. Separate Lamp Blower , Lamp Blower Duct and Lamp Blower Holder 5. T ear off 1 mylar (as red s[...]
-
Page 38
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-14 2-14 Disassemble Lamp to Ballast Cable 1. Unscrew 1 screw (as red circle) 2. Unplug Lamp to Ballast Cable[...]
-
Page 39
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-15 2-15 Disassemble Engine Module 1. Unscrew 4 screws (as red circle) 2. Disassemble Engine Module 3. Unscrew 3 screws (as yellow circle) 4. Disassemble Focus Ring 2-16 Disassemble DMD Board and DMD Chip 1. Unscrew 2 screws (as blue circle) 2. Disassemble Heat sink ,DMD Mask and DMD Rubb[...]
-
Page 40
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-16 2-17 Disassemble Speaker Module 1. Disassemble Speaker Module 2. Separate Speaker and Rubber 2-18 Disassemble Interrupt Switch Module 1. Unscrew 1 screw (as red circle) 2. Release 2 tenons (as yellow circle) 3. Separate Interrupt Switch and Interupt Switch Holder[...]
-
Page 41
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-17 2-19 Disassemble IR Sensor Module 1. T ear off 1 Mylar (as red square) 2. Disassemble IR Sensor Board[...]
-
Page 42
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-18 2-20 Rod Adjustment 1. Environment adjustment - The distance between the engine and the screen is 2.36 M - This process should be done at a dark environment. (under 5 Lux) 2. Procedure adjustment - Change the screen to “white screen.” - Adjust the screws by using the rod on the en[...]
-
Page 43
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-19 2-21 Re-write Lamp Usage Hour 1. Get into service mode - Press (power→left→left→menu) to get into service mode 2. Choose RD Menu 3. Choose Lamp life warning test 4. Use left or right key to re-write the lamp hour back to previous lamp usage hour 5. Choose Return to Service Menu [...]
-
Page 44
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-20 2-22 Assemble IR Sensor Module 1. Assemble IR Sensor Board in red square 2. Stick 1 Mylar . 2-23 Assemble Interrupt Switch Module 1. Assemble Interrupt Switch 2. Screw 1 screw (as red circle)[...]
-
Page 45
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-21 2-24 Assemble Speaker Module 1. Assemble Speaker and Rubber 2. Assemble Speaker Module[...]
-
Page 46
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-22 2-26 Assemble Engine Module 1. Assemble Focus Ring 2. Screw 3 screws (as yellow circle) 3. Assemble Engine Module 4. Screw 4 screws (as red circle) 2-25 Assemble DMD Board and DMD Chip 1. Assemble DMD Chip and rotate DMD Chip Lock clockwise (as red arrow) 2. Assemble DMD Mask ,DMD Rub[...]
-
Page 47
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-23 2-27 Assemble Lamp to Ballast Cable 1. Plug Lamp to Ballast Cable in yellow square 2. Screw 1 screw (as red circle)[...]
-
Page 48
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-24 2-28 Assemble Lamp Blower Module and Syst em Fan Module 1. Assemble System Fan and Lamp Housing 2. Screw 3 screws (as green circle) 3. Stick 1 mylar (as red square) 4. Assemble Lamp Blower , Lamp Blower Duct and Lamp Blower Holder 5. Screw 3 screws (as yellow circle) 6. Assemble Lamp [...]
-
Page 49
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-25 2-29 Assemble Thermal Switch Module 1. Assemble Thermal Switch 2. Screw 1 screw (as red circle)[...]
-
Page 50
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-26 2-30 Assemble DC-DC Module 1. Plug 2 cables in red square 2. Assemble DC-DC Module 3.Screw 1 screw (as red circle)[...]
-
Page 51
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-27 2-31 Assemble Ballast Module 1. Stick 1 mylar under Ballast Module 2. Assemble Ballast Module 3. Screw 3 screws (as yellow circle) 4. Assemble AC Inlet Bracket 5.Screw 3 screws (as red circle) 6.Plug 2 cables (as red square)[...]
-
Page 52
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-28 D C B A A D C B 2-32 Assemble Front Cover Module 1. Assemble Front Cover Module Note: there are 6 tenons (as red circle)[...]
-
Page 53
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-29 A A 2-33 Assemble Color Wheel Module 1. Assemble Photo Sensor Board 2. Screw 1 screw (as yellow circle) 3. Assemble Color Wheel Module 4. Screw 2 screws (as red circle)[...]
-
Page 54
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-30 2-34 Assemble Main Board Module 1. Screw 2 screws (as red circle) to assemble the Daughter Board. (only for P3251) 2. Plug 6 connectors (as orange square) 3. Assemble Main Board Module (as red arrow) and plug 1 connector (as yellow square) A F E D C B[...]
-
Page 55
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-31 4. Plug 5 connectors (as green square) Note: - The arrangement of cables are as follows: A: DC-DC 5 pin cable B: Ballast 5 pin cable C: FPC D: Speaker cable E: System Fan cable F: Thermal Switch calbe G: Blower cable H: IR Sensor Board cable I : Photo Sensor Board cable J: Color Wheel[...]
-
Page 56
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-32 2-36 Assemble Key Pad Board Module 1. Assemble Key Pad Button and Key Pad Board on T op Cover Module 2. Screw 4 screws (as red circle)[...]
-
Page 57
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-33 2-37 Assemble T op Cover Module 1. Plug 1 FPC cable (as red square) 2. Assemble T op cover Module 3. Screw 2 Hex screws (as yellow circle) 4. Screw 5 screws (as red circle)[...]
-
Page 58
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-34 2-38 Assemb le L amp Modu le 1. Assemble Lamp Module 2. Screw 2 screws (as red circle)[...]
-
Page 59
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2-35 2-39 Assemble Lamp Cover Module 1. Assemble Lamp Cover Module 2. Screw 2 screws (as red circle) 3. T urn over the projector ,assemble OK[...]
-
Page 60
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 3-1 Chapter 3 T roubleshooting 3-1 LED Lighting Message Message Power LED Lamp LED T emp LED Plug-in Power Cord Flash Red (100ms) Flash Red (100ms) Flash Red (100ms) Standby Mode Red X X Power button ON Blue X X F/W Download Mode Red Red Red Lamp Ignited Flash Blue 0.5 second H(On), 0.5 se[...]
-
Page 61
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 3-2 (R) - RED (B) - BLUE (F) - FLASH (X) - OFF Message Power LED Lamp LED T emp LED Error for Fan Fail(On Event) Blue X Flash Red 0.5 second H(On), 0.5 second L(Off) Error for Fan Fail(On Standby) Red X Flash Red 0.5 second H(On), 0.5 second L(Off) Error for Color Wheel fail / Striking Lam[...]
-
Page 62
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 3-3 Power on (as soon as power button pressed) So(0.3s) Power on (lamp lighting failed) 2 x {So(0.1s) – Off(0.1s)} per lighting failure 12s interval for each trial lighting. Max 4 times of trial Power on (lens cap was not opened, for the model with sliding lens cover only) 2 x {So(0.1s) [...]
-
Page 63
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 3-4 3-3 Main Procedure No Symptom Procedure 1 No Power • Ensure the Power Cord and AC Power Outlet are securely connected • Check Lamp Cover and Interrupt Switch • Ensure all connectors are securely connected and aren’t broken • Check Lamp Driver • Check L VPS • Check Main Bo[...]
-
Page 64
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 3-5 No Symptom Procedure 3 No Image • Ensure the Signal Cable and Source work (If you connect multiple sources at the same time, use the “Source” button on the control panel to switch) • Ensure all connectors are securely connected and aren’t bro - ken • Check Main Board • Ch[...]
-
Page 65
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 3-6 No Symptom Procedure 7 Image Flicker • Do “Reset (All data)” of the OSD Menu • Ensure that the signal cables and source are work as well- Check Lamp Module • Check Colour Wheel • Check DMD Board • Check Main Board 8 Colour Abnormal • Do “Reset (All data)” of the OSD[...]
-
Page 66
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 3-7 No Symptom Procedure 13 Function Abnormal • Do “Reset (All data)” of the OSD Menu • Check Main Board • Check DMD Board 14 Audio Abnonrmal • Ensure that the signal cables and source are work as well • Check Speaker Module • Check Main Board 15 FW Upgrade Failed • Ensur[...]
-
Page 67
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 3-8 No Symptom Procedure 17 SD Card/ USB ash disk Function Failed • Ensure that the signal cables and source work as well. • Check Main Board • Check Daughter Board[...]
-
Page 68
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-1 Chapter 4 Function T est & Alignment Procedure 4-1 T est Equipment Needed - IBM PC with SVGA/XGA resolution - DVD player with Multi-system (NTSC/P AL/SECAM), equipped “Component”, “S-Video” , “Composite” and "HDMI". - HDTV Source (480P , 720P , 1080i) - Minolt[...]
-
Page 69
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-2 4-4 T est Condition - Circumstance brightness: Dark room less than 5.0 lux. - Inspection distance: 1.8m~2.5m functional inspection. - Screen size: 60 inches diagonal - After repairing each P3150/P3250/P3150 refresh/P3250 refresh/P3251 , the unit should be run-in (refer to the table bel[...]
-
Page 70
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-3 Defect specication table Order Symptom Pattern Criteria 1 Bright pixel (dots) Gray 10 pattern A+B≤1 2 Dark pixel (dots) White pattern A+B ≤ 6 3 Bright blemish Gray 15 pattern A+B ≤ 10 4 Dark blemish Blue 60 pattern A+B ≤ 10 5 Bright dot on frame Gray 10 pattern ≤ 1 6 Unsta[...]
-
Page 71
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-4 4-5 T est Inspection Procedure Change parts/ Update M/B FW Color Wheel Lamp Module Engine EDID Lamp Driver V ersion Update v v v Colo r Wh eel Inde x v v Reset lamp hour v OSD Reset v v EDID v Re-write Lamp Hour Usage v Check ROD Position and Adjust v Reset Dafult Language ( for refres[...]
-
Page 72
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-5 - Adjust Resync or Frequency/T racking/H. Posi - tion/V . Position to the inner screen. Inspection item - Eliminate visul wavy noise by Rsync, Frequency or T racking selction. - Check if there is noise on the screen. - Horizontal and vertical position of the vedio should be adjustable [...]
-
Page 73
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-6 4. �right �lemish �right �lemish Procedure - T est equipment: video generator - T est signal: analog 1024 x 768@60Hz - T est Pattern: Gray 15 Inspection item - Bright blemish check. Criteria - The bright blemish should be no more than 10 under gray 15 pattern. - Ref. Defect spe[...]
-
Page 74
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-7 7. Color performance Procedure - T est equipment: video generator . - T est signal: 480p, 720p, 1080p - T est Pattern: Master , 64 gray RGBW or SMPTE bar * Please refer to 4-2 to get into service mode. Use 720p & 1080p signal, master pattern to do HDTV test. Color cannot discolor t[...]
-
Page 75
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-8 - Check the sound from speakers. 2. S-Video Procedure - T est equipment: DVD player - Test signal: S-Video Inspection item - Video performance test Inspection Distance - 1.8M ~2.5M Criteria - Check any abnormal color , line distortion or any noise on the screen. - Check the sound from [...]
-
Page 76
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-9 5.HDMI T est Procedure - T est Signal : 720p,1080i - T est Pattern : Any Pattern - Equipment: DVD Player with HDMI output - Display type must be set to 16:9 Inspection item - HDMI T est Criteria - Ensure if the image is well performed and the color can not discolor . 4-8 Optical Perfor[...]
-
Page 77
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-10 2. �rightness Procedure - Full white pattern - Use CL100 to measure brightness values of P1~P9. - Follow the brightness formula to calculate brightness values. ☼ Brightness Formula Avg.(P1~ P9)x1.1m 2 Criteria - 900 lumens lumens 3. Ful On/Full Off Contrast Procedure - Full white [...]
-
Page 78
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-1 1 4-9 SD Card /USB ash disk T est (only for P3251) 1.SD Card T est Procedure - T est equipment: SD Card(include test pattern), - T est Pattern: WhiteBlack,Graystep16, ColorBar - Turn on the projector and plug SD Card into the projector . - Select “SD”-->”Photo”, play the [...]
-
Page 79
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4-12 2. Check points for e�terior and print pattern Check item Check point T ext & Pattern Missing letters & pattern or blurry prints are unacceptable. Exterior Dirt, scrape, water ripples and uneven color are unacceptable. Buttons Stuck buttons are unacceptable. Focus ring Focus[...]
-
Page 80
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-1 Chapter 5 Firmware Upgrade Section 1: System Firmware Upgrade 5-1 Equipment Needed Software : - DLP Composer - Firmware - 8M Flash (8M ash has to put in PC and set right path in 5-5 step4) Hardware : - Projector - Power cord (42.53506G002) - USB Cable (42.87304G001) - PC or Laptop N[...]
-
Page 81
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-2 5-2 DLP Composer Lite Setup Procedure 1. Choose "DLP Composer Lite V7.1 Setup" Program. 2. Click Next button. 3. Read License Agreement. - Choose I accept and agree to be bound by all the terms and conditions of this License Agreement. 4. Click Next. 5. Click "Next"[...]
-
Page 82
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-3 6. Click Next. 7. Click Next. 8. Writing system registry values. 9. Click Finish.[...]
-
Page 83
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-4 5-3 USB Driver Upgrade Procedure 1. Set up - Plug in power cord and then press "Power" and "Menu" button simultaneously hold on about 5 seconds, release "Power" and "Menu" button - Once the Power ,Lamp and T emp LED light on RED at the same time,[...]
-
Page 84
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-5 5-4 Firmware Upgrade Procedure 1. Set-up - Plug in power cord and then press "Power" and "Menu" button simultaneously hold on about 5 seconds, release "Power" and "Menu" button - Once the Power ,Lamp and T emp LED light on RED at the same time, p[...]
-
Page 85
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-6 5. Select EditpreferencesCommunications - Choose USB". - Click OK". 6. Choose Flash Loader . - Click Browse to search the rmware le.[...]
-
Page 86
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-7 7. Selete the item skip Boot Loader Area (select 32KB). - Click Reset Bus to erase the ash memory . 8. If the rmware i s ready , click start download to process the rmware upgrade. - Click Y es to erase the ash memory .[...]
-
Page 87
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-8 9. When rmware upgrade process is nished the unit return to stand-by status. The Power LED lights on Red. - Unplug USB cable and power cord and replug in power cord. 10. Restart the unit and enter the service mode to check the rmware version. (T o enter service mode, please re[...]
-
Page 88
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-9 Section 2 : W aveform Download 5-5 W aveform Download ( for refresh models) 1.Hold on the “Up” button, then plug Power Cord in, the Power LED lights on red. After about 5 seconds relea se “Up” button , Power LED turns to blue and T emp LED will ash for 4 seconds. After that,[...]
-
Page 89
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-10 5-6 W aveform Download ( for P3251) 1.Hold on the “Power” button, then plug Power Cord in, After about 4 seconds , release “Power” button, at the same time the Lamp LED ash red. 2.After about 10 seconds, Power LED lights red, the message means success download. 3. Re-plug i[...]
-
Page 90
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-1 1 Section 3 : Multi-Media Firmware Upgrade (only for P3251) 5-7 Equipment Needed Software : - 1201 tool - Firmware (*.fwu) Hardware : - Projector - Power cord (42.53506G002) - USB Cable (male to male) - PC or Laptop[...]
-
Page 91
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-12 5-8 USB Driver Upgrade Procedure 1. Set up - Hold on “Power” and "Menu" button and then Plug in power cord , hold on about 5 seconds, release "Power" and "Menu" button , the Power Lamp and T emp LED light RED at the same time. - Plug in USB cable into[...]
-
Page 92
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-13 3) Click "Continue Anyway". 4) Click "Finish" to end the installation. 5) Found new USB Root HUB will be appearred on the screen.[...]
-
Page 93
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-14 5-9 Multi-Media Firmware Upgrade Procedure 1. Set-up - Hold on “Power” and "Menu" button and then Plug in power cord , hold on about 5 seconds, release "Power" and "Menu" button , the Power Lamp and T emp LED light RED at the same time. - Plug in USB [...]
-
Page 94
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-15 4. Click “Download.” 5. The success information will show on screen (as red square)[...]
-
Page 95
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5-16 6. Restart the unit and enter the service mode to check the Multi-Media rmware version. (T o enter service mode, please refer to Chapter 4 Function T est and Alignment Procedure.)[...]
-
Page 96
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 6-1 Chapter 6 EDID Upgrade 6-1 EDID Introduction Extended Display Identication Data is a VESA standard data format that contains basic information about a display device and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timing[...]
-
Page 97
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 6-2 6-2 Equipment Needed Software - EDID Program (Generic V0.51) - EDID File Hardware - Projector - Generic Fixture (80.00001.001) for EDID Key-in (Fixture: JP3 must be closed) - Power cord for Projector (42.53506G002) - RS-232 9 Pin Cable (pin to pin, F-M) (42.83C07G001) - Monitor - PC - [...]
-
Page 98
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 6-3 6-3 Setup Procedure (VGA) 1. Connect all ports (1) Connect P1 of Fixture with COM Port of PC/Laptop by RS232 Cable. (2) Connect P2 of Fixture with VGA port of Projector by VGA Cable. (3) Plug Power Adapter to Power CNN. (4) Plug Power Cord to P3250 unit. Note: Conrm JP3 i s Close st[...]
-
Page 99
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 6-4 6-4 EDID Key-In Procedure 1. Execute EDID Program (1) Click on "EDID" to execute EDID program. 2. Process (1) Check the COM port is COM 1" (Select the COM port which you are using). (2) Click the Model button. (3) Choose the source le "ACER_P3250_20080218_C.ini&q[...]
-
Page 100
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 6-5 5 6 7 5. Finish (1) "OK" will be shown on the screen. 6. Read EDID information (1) In the Read item,select "Analog" and "T rans". (2) Please press "Read" button. 7. Read EDID information (1) EDID Informations will show the result.[...]
-
Page 101
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 6-6 6-5 Setup Procedure (HDMI) 1. Connect all ports (1) Connect P1 of Fixture with COM Port of PC/Laptop by RS232 Cable. (2) Connect P2 of Fixture with P3 by DVI Cable. (3) Plug P4 to HDMI Port of the Projector . (4) Plug Power Adapter to Power CNN. ( 5) Plug Power Cord to P3250 unit. Note[...]
-
Page 102
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 6-7 2. Process (1) Check the COM port is "COM 1" (Select the COM port which you are using). (2) Click the "Model" button. (3) Choose the source le "ACER_P3250_20080218_C.ini" and then open it. 3. Process (1) Key in the serial number into the barcode blank s[...]
-
Page 103
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 6-8 5. Finish (1) "OK" will be shown on the screen. 6. Read EDID information (1) In the Read item,select "Digital" and "T rans". (2) Please press "Read" button. 7. Read EDID information (1) EDID Informations will show the result. 5 7 6 (2) (1)[...]
-
Page 104
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 6-9 6-6 Default Language Reset (For P3150 refresh/P3250 refresh) (1) Hold on “Down” button then plug in the Power Cord. Note: At this moment, Power LED turns blue while T emp LED ashes in red for about 4s,then release the “Down” button. (2) After that, please check the LED statu[...]
-
Page 105
P3150/P3250 /P3150 Refresh/P3250 Refresh/P3251 Condential 1 Appendix A DC. P3150 7 2 4 1 8 5 6 3 10 1 1 12[...]
-
Page 106
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 2 ITEM P/N DECRIPTION Supply 1 70.89Y03G001 ASSY BOTT OM COVER P3150 N 2 70.89Y01G001 ASSY TOP COVER MODULE P3150 N 3 70.89Y02G001 ASSY FRONT COVER P3150 N 4 70.89Y08G001 ASSY MAIN BOARD MODULE P3150 N 5 61.85928G001 LAMP HOUSING SHOULDER SCREW SB N 6 51.89Y02G002 LAMP COVER P3150 7 85.005[...]
-
Page 107
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 3 ASSY BLOWER 4510 MODULE 3 2 1 4 4 4 ITEM P/N DECRIPTION Supply 1 49.89S01G001 LAMP BLOWER / 45*45*10 mm, 60m 2 61.89S13G001 BLOWER 4510 HOLDER SECC M209X N 3 61.89S1 1G001 LAMP BLOWER 4510 DUCT AL M209X N 4 85.1A126G040 SCREW P AN MECH M2.6*4 Ni N[...]
-
Page 108
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 4 15 8 4 14 2 10 1 3 7 9 6 5 1 1 9 12 9 16 ASSY T OP COVER MODULE P3150[...]
-
Page 109
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 5 ITEM P/N DECRIPTION Supply 70.89Y25GR01 ASSY T OP COVER MODULE FOR P3150(SERVICE) 1 61.89Y02G001 TOP COVER P3150 N 2 42.89501G002 CABLE FPC 24P P=0.5 150mm KE 3 51.89Y04G001 TOP IR LENS P3150 N 4 51.89Y1 1G002 KEYP AD BUTTON P+R P3150 5 51.89Y06G001 ZOOM RING HOLDER P3150 N 6 51.89Y07G00[...]
-
Page 110
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 6 ASSY FRONT COVER P3150 1 3 2 ITEM P/N DECRIPTION Supply 70.89Y24GR01 ASSY FRONT COVER MODULE FOR P3150/P3250(SERVICE) 1 51.89Y01G001 FRONT COVER P3150 N 2 51.89Y03G001 FRONT IR LENS P3150 N 3 61.88T15G001 ACER LOGO FOR X1 160[...]
-
Page 111
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 7 ASSY BOTT OM COVER P3150 33 15 30 31 1 1 29 32 8 28 1 24 22 3 2 12 7 1 31 1 6 9 10 26 5 4 23 19 21 14 13 25 20 16 27 17 18 15[...]
-
Page 112
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 8 ITEM P/N DECRIPTION Supply 1 70.89Y17G001 ASSY LAMP HOUSING MODULE M209X N 2 70.89Y13G001 ASSY DC-DC MODULE P3150 N 3 70.89S09G001 ASSY BLOWER 4510 MODULE M209X N 4 51.89Y08G001 ELEV A T OR PUSH BUTTON P3150 5 51.89Y09G001 ELEV A T OR BASE P3150 N 6 52.89Y02G001 ADJUST FOOT P3150 N 7 86.[...]
-
Page 113
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 9 ITEM P/N DECRIPTION Supply 70.89Y23GR01 ASSY PCBA MAIN BD MODULE FOR P3150(SERVICE) 1 80.89Y01G001 PCBA MAIN BOARD FOR P3150 N 2 41.82B17G001 EMI VIDEO GASKET N 3 41.82G03G001 EMI GASKET USB CONNECT OR EP719 N 4 41.89S14G001 EMI T APE W30*L30 N 5 51.89Y17G001 MAIN BOARD LIGHTCUT MYLAR P3[...]
-
Page 114
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 10 3 6 5 3 2 4 1 ASSY DC-DC MODULE P3150 ITEM P/N DECRIPTION Supply 70.89Y28GR01 ASSY DC-DC MODULE FOR P3150/P3250 (SERVICE) 1 42.004A1G001 W .A.4P #24/#26 100mm DC.DC/BALLAST 2 42.004B1G001 W .A. 5P #26 140mm DC-DC/MAIN BOARD M209X 3 51.00061G001 PLASTIC RIVET E3.0 SR-3L”A0” N 4 51.89[...]
-
Page 115
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 1 1 ASSY LAMP HOUSING MODULE P3150 4 4 4 4 2 3 6 1 5 ITEM P/N DECRIPTION Supply 1 43.89S01G001 TH-RMAI SWITCH WITH BRACKET (KLIX- ON YSII 2 49.85M03G001 SYSTEM F AN/55*55*15mm 3 61.89Z06G001 LAMP HOUSING MG ALLOY EX330 N 4 85.1A123G180 SCREW P AN MECH M3*18 NI EP910 N 5 85.1A126G040 SCREW [...]
-
Page 116
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 12 ASSY SPEAKER MODULE P3150 ITEM P/N DECRIPTION Supply 1 49.89Y01G001 SPEAKER MINI IW 4 ohm 140 mm P3150 2 52.89Y01G001 SPEAKER RUBBER P3150 N[...]
-
Page 117
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 13 ASSY ENGINE MODULE P3150 6 9 8 18 17 16 5 20 21 2 7 23 24 15 1 15 13 10 15 15 1 1 14 3 19 12 24 4 24 25[...]
-
Page 118
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 14 ITEM P/N DECRIPTION Supply 70.89Y22GR01 ASSY ENGINE MODULE FOR P3150/ P3250(SERVICE) 1 70.89Y15G001 ASSY ENGINE BOTT OM COVER P3150 N 2 70.89Y05G001 ASSY ENGINE BASE MODULE P3150 N 3 70.89Y16G001 ASSY ROD MODULE P3150 N 4 70.89Y21GR01 ASSY COLOR WHEEL MODULE P3150 5 80.89S02G001 PCBA DM[...]
-
Page 119
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 15 1 1 10 6 7 9 8 5 1 4 3 2 AK. P3150 ITEM P/N DECRIPTION Supply 1 36.00006G031 W ARRANTY CARD ,EUROPE FOR ACER N 2 36.00027G001 SER VICE ST A TION CARD N 3 36.89Y01G001 USER’S GUIDE MUL TILINGUAL (C N 4 36.89Y02G001 QUICK ST ART CARD MUL TILINGUA N 5 51.86213G002 PE BAG ZIPPER #9 W/RECY[...]
-
Page 120
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 16 18 9 12 17 16 15 20 21 19 23 22 10 3 1 5 2 20 DP . P3150[...]
-
Page 121
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 17 ITEM P/N DECRIPTION Supply 1 51.00201G001 HANDLE BAR 1.PE HD70 N 2 51.00200G001 HANDLE BAR 2. PE HD70 N 3 55.89Y01G001 CART ON CARRY BOX P3150 N 4 55.89Y02G001 CENTER P APER BOX P3150 N 5 35.82L04G001 ACER T APE 45M FOR CAR TON N 6 55.87W04G001 CORNER P APER P5271 N 7 58.86202GC02 COVER[...]
-
Page 122
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 18 DC. P3250 7 2 4 1 8 5 6 3 10 1 1 12[...]
-
Page 123
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 19 ITEM P/N DECRIPTION Supply 1 70.89Y03G001 ASSY BOTT OM COVER P3150 N 2 70.89Y01G001 ASSY TOP COVER MODULE P3150 N 3 70.89Y02G001 ASSY FRONT COVER P3150 N 4 70.89Y08G001 ASSY MAIN BOARD MODULE P3150 N 5 61.85928G001 LAMP HOUSING SHOULDER SCREW SB N 6 51.89Y02G002 LAMP COVER P3150 7 85.00[...]
-
Page 124
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 20 ASSY BLOWER 4510 MODULE P3250 3 2 1 4 4 4 ITEM P/N DECRIPTION Supply 1 49.89S01G001 LAMP BLOWER / 45*45*10 mm, 60m 2 61.89S13G001 BLOWER 4510 HOLDER SECC M209X N 3 61.89S1 1G001 LAMP BLOWER 4510 DUCT AL M209X N 4 85.1A126G040 SCREW P AN MECH M2.6*4 Ni N[...]
-
Page 125
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 21 15 8 4 14 2 10 1 3 7 9 6 5 1 1 9 12 9 16 ASSY T OP COVER MODULE P3250[...]
-
Page 126
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 22 ITEM P/N DECRIPTION Supply 70.89Y30GR01 ASSY T OP COVER MODULE FOR P3250(SERVICE) 1 61.89Y02G001 TOP COVER P3150 N 2 42.89501G002 CABLE FPC 24P P=0.5 150mm KE 3 51.89Y04G001 TOP IR LENS P3150 N 4 51.89Y1 1G002 KEYP AD BUTTON P+R P3150 5 51.89Y06G001 ZOOM RING HOLDER P3150 N 6 51.89Y07G0[...]
-
Page 127
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 23 ASSY FRONT COVER P3250 1 3 2 ITEM P/N DECRIPTION Supply 70.89Y24GR01 ASSY FRONT COVER MODULE FOR P3150/P3250(SERVICE) 1 51.89Y01G001 FRONT COVER P3150 N 2 51.89Y03G001 FRONT IR LENS P3150 N 3 61.88T15G001 ACER LOGO FOR X1 160 N[...]
-
Page 128
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 24 ASSY BOTT OM COVER P3250 22 1 15 30 31 1 1 29 32 8 28 18 24 3 2 12 7 31 1 6 9 10 26 27 5 4 23 19 21 33 14 13 25 20 16 22 17 15[...]
-
Page 129
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 25 ITEM P/N DECRIPTION Supply 1 70.89Y17G001 ASSY LAMP HOUSING MODULE M209X N 2 70.89Y13G001 ASSY DC-DC MODULE P3150 N 3 70.89S09G001 ASSY BLOWER 4510 MODULE M209X N 4 51.89Y08G001 ELEV A T OR PUSH BUTTON P3150 5 51.89Y09G001 ELEV A T OR BASE P3150 N 6 52.89Y02G001 ADJUST FOOT P3150 N 7 86[...]
-
Page 130
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 26 26 ITEM P/N DECRIPTION Supply 70.89Y29GR01 ASSY PCBA MAIN BD MODULE FOR P3250(SERVICE) 1 80.89Y01G001 PCBA MAIN BOARD FOR P3150 N 2 41.82B17G001 EMI VIDEO GASKET N 3 41.82G03G001 EMI GASKET USB CONNECT OR EP719 N 4 41.89S14G001 EMI T APE W30*L30 N 5 51.89Y17G001 MAIN BOARD LIGHTCUT MYLA[...]
-
Page 131
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 27 3 2 6 5 3 4 1 ASSY DC-DC MODULE P3250 ITEM P/N DECRIPTION Supply 70.89Y28GR01 ASSY DC-DC MODULE FOR P3150/P3250 (SERVICE) 1 42.004A1G001 W .A.4P #24/#26 100mm DC.DC/BALLAST 2 42.004B1G001 W .A. 5P #26 140mm DC-DC/MAIN BOARD M209X 3 51.00061G001 PLASTIC RIVET E3.0 SR-3L”A0” N 4 51.89[...]
-
Page 132
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 28 ASSY LAMP HOUSING MODULE P3250 4 4 4 4 2 3 6 1 5 ITEM P/N DECRIPTION Supply 1 43.89S01G001 TH-RMAI SWITCH WITH BRACKET (KLIX- ON YSII) 2 49.85M03G001 SYSTEM F AN/55*55*15mm 3 61.89Z06G001 LAMP HOUSING MG ALLOY EX330 N 4 85.1A123G180 SCREW P AN MECH M3*18 NI EP910 N 5 85.1A126G040 SCREW [...]
-
Page 133
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 29 ASSY SPEAKER MODULE P3250 ITEM P/N DECRIPTION Supply 1 49.89Y01G001 SPEAKER MINI IW 4 ohm 140 mm P3150 2 52.89Y01G001 SPEAKER RUBBER P3150 N 1[...]
-
Page 134
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 30 ASSY ENGINE MODULE P3250 4 1 24 1 1 14 15 15 10 13 15 15 3 19 2 7 8 9 16 17 18 12 5 20 6 21 24 24 23 25[...]
-
Page 135
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 31 ITEM P/N DECRIPTION Supply 70.89Y22GR01 ASSY ENGINE MODULE FOR P3150/ P3250(SERVICE) 1 70.89Y15G001 ASSY ENGINE BOTT OM COVER P3150 N 2 70.89Y05G001 ASSY ENGINE BASE MODULE P3150 N 3 70.89Y16G001 ASSY ROD MODULE P3150 N 4 70.89Y21GR01 ASSY COLOR WHEEL MODULE P3150 5 80.89S02G001 PCBA DM[...]
-
Page 136
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 32 1 1 10 6 7 9 8 5 1 4 3 2 AK. P3250 ITEM P/N DECRIPTION Supply 1 36.00006G031 W ARRANTY CARD ,EUROPE FOR ACER N 2 36.00027G001 SER VICE ST A TION CARD N 3 36.89Y01G001 USER’S GUIDE MUL TILINGUAL (C N 4 36.89Y02G001 QUICK ST ART CARD MUL TILINGUA N 5 51.86213G002 PE BAG ZIPPER #9 W/RECY[...]
-
Page 137
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 33 18 9 12 17 16 15 20 21 19 23 22 10 3 1 5 2 20 DP . P3250[...]
-
Page 138
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 34 ITEM P/N DECRIPTION Supply 1 51.00201G001 HANDLE BAR 1.PE HD70 N 2 51.00200G001 HANDLE BAR 2. PE HD70 N 3 55.89Y01G001 CART ON CARRY BOX P3150 N 4 55.89Y02G001 CENTER P APER BOX P3150 N 5 35.82L04G001 ACER T APE 45M FOR CAR TON N 6 55.87W04G001 CORNER P APER P5271 N 7 58.86202GC02 COVER[...]
-
Page 139
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 35 Appendix B 3 I. Serial Number System Denition Serial Number Format for Projector(for non-refresh models,take P3150 for example) EYJ6701W02 81 1 00000 59 00 1 2 3 4 5 1 : EYJ6701W02 = Part Number excluded “dot” 2 : 81 1 = Week Code(ex:200 8 = 8,the eleven weeks of the year = 1 1) [...]
-
Page 140
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 36 Serial Number Format for Projector(for refresh models,take P3150refresh for example) EYJ8401006 829 00000 59 0 1 1 2 3 4 5 1 : EYJ8401006 = Part Number excluded “dot” 2 : 829 = Week Code(ex:200 8 = 8 twenty-nine weeks of the year = 29) 3 : 00000 = Serial Numbers 4 : 59 = Manufacturi[...]
-
Page 141
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Condential 37 II. PCBA Code Denition PCBA Code for Projector A B XXX XXXXXXXXX CC XXX EEEE 1 : ID 2 : V endor Code 3 : Firmware V ersion 4 : P/N 5 : MB V ersion 6 : Date Code 7 : S/N 6 7 1 2 3 4 5 6 5 4 7 3 2 1[...]