ADTRAN NetVanta 1224 manual

T ot al Access 1224 Quad T1 IMA 24-Port DSLAM Inst allation and Maintenance Practice Document Number: 61 179621L1-5C CLEI Number: V AMA510E_ _ January 2007 1 2 3 4 T1/ E1 ®[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice ii 61179621L1-5C Front Matter T rademar ks Any brand names and product names includ ed in this manual are trademarks, registered trademarks, or trade names of their respective holders. T o the Holder of the Manual The contents of this publication are current as of th[...]

61179621L1-5C iii R e vision Histor y Con v entions The following typographical conventi ons are used in this document: This font indicates a cross-reference link. This font indicates screen menus, fields, and p arameters. T HIS FONT indicates keyboard keys ( E NTER , E SC , A LT ). Keys that are to be pressed simultaneously are shown with a plus s[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice iv 61179621L1-5C F eder al Communications Commission (FCC) Sta tement This equipm ent generates, u ses, and can radiate radi o frequency en ergy and if not installed and used in accordance with the instruction ma nual, may cause interference to radio commu- nications[...]

61179621L1-5C v Contents Section 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice vi 61179621L1-5C Section 5 User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Contents 61179621L1-5C vii SNMP Contact Information Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-69 SNMP Community Names Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-70 SNMP Trap Hosts Menu . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice viii 61179621L1-5C Hamband Mask for Port: # Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-141 Cabinet Mode for Port: # Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-142 Li[...]

Figures 61179621L1-5C ix Figur es Figure 1-1. Total Access 1224 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Figure 1-2. Total Access 1224 Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Figure 2-1. Total Access 1224[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice x 61179621L1-5C Figure 5-25. ATM Port Cell Count Summary Sc reen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 3 9 Figure 5-26. Clear All PM for A ll Ports Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Figures 61179621L1-5C xi Figure 5-72. E1 Performance Monitoring Status Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -102 Figure 5-73. E1 Test Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-103 Figure 5-74. Restore E1 Factory Default[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice xii 61179621L1-5C Figure 5-119. Contact Information Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-161 Figure 5-1 20. TL1 Mode Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Tables 61179621L1-5C xiii T a bles Table 1-1. Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -4 Table 1-2. Compliance Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Table 3-1. Total[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice xiv 61179621L1-5C Table 5-37 . Restore IP Fac tory Defaults Me nu Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 5 9 Table 5-38 . Dynamic IP Settin gs - for IP over Etherne t Menu Items . . . . . . . . . . . . . . . . . . . . [...]

Tables 61179621L1-5C xv Table 5-84. S tatus/Failure Monitoring Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-116 Table 5-85. IMA Group 1 Failure Monitoring Status Screen Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-118 Table 5-86. IMA Link Failure Monito ring Status Screen St ates[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice xvi 61179621L1-5C This page is intentionally blank.[...]

61179621L1-5C 1-1 Section 1 Intr oduction GENER AL The Total Access 1224 (see Figure 1-1 ) is a Digital Subscriber Line Access Multiplexer (DSLAM) system that is used to further extend Asymmetrical Digital Subscriber Line (ADSL) services in the network. Figure 1-1. Total Access 1224 FAN MO DUL E 1179675L1 3.0 ADSL+POTS PORTS 1-24 EXPANSION OUT 1179[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 1-2 61179621L1-5C DESCRIPTION The Total Access 1224 is a mini-D SLAM that accepts up to four T1 network feeds assigned to a single IMA group. Inverse Multip lexing over ATM (IMA) is a tec hnology used to bond multiple (DS1) links into a single data pipe. The Total Ac[...]

Description 61179621L1-5C 1-3 F r ont Panel LEDs There are ten LEDs on the front panel of the Total Access 1224, as shown in Figure 1-2 . • Two LEDs provide status information ( PWR and ALM ) • Four LEDs provide the status of the four T1/E1s ( T1/E1 ) • Two LEDs provide Ethernet ( ETHERNET ) status • Two LEDs provide Expansion Port ( EXP AN[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 1-4 61179621L1-5C T able 1-1 . F r ont Panel LEDs Label St at us Description PWR Green Yellow Red Off T otal A ccess 1224 is In Service T otal A ccess 1224 is Out of Service-Maintenance T otal Acces s 1224 has f ailed self test No power present on T o tal Access 1224[...]

Description 61179621L1-5C 1-5 Compliance Table 1-2 shows the compliance codes for the Total Access 1224. The Total Access 1224 is compliant with GR-63-CORE/GR-1089-CORE (NEBS), and Listed to the applicable UL Safety Standard(s). The devi ce is to be inst alled in a restricted access location. This device complies with Part 15 of the FCC rul es. Ope[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 1-6 61179621L1-5C This page is intentionally blank.[...]

61179621L1-5C 2-1 Section 2 A pplica tion Guidelines INTRODUCTION The Total Access 1224 provides 24 ADSL2+ plus POTS ports downstream to the subscriber, one to four T1 IMA ports upstre am to the network, local and re mote management capabilities, and ten front panel LEDs that indicate status. Figure 2-1 illustrates an operational scenario for the T[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 2-2 61179621L1-5C EXPANSION Up to four Total Access 1224 syst ems can be connected together (see Figure 2-2 ). One of the units must be a Total Access 12 24 Host unit (P/N 1179621L1) and the others are Total Access 1224 Client units (P/N 1179621L5). The client units [...]

61179621L1-5C 3-1 Section 3 Installa tion INTRODUCTION CA UTION Electronic units can be damaged by ESD. When handling units , wear an antistatic discharge wris t strap to prevent damage to elec- tronic components. Place units in antistatic packing material when transporting or storing. When wo rking on units, always place them on an approved antist[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-2 61179621L1-5C Shipping Contents The shipping container for the Total Ac cess 1224 includes the contents shown in Table 3-1 . R equired T ools The following tools and materials are requ ired to install the Total Access 1224: •W i r e - w r a p t o o l • #2 phi[...]

Installation Prerequisites 61179621L1-5C 3-3 INSTALLA TION PRER EQUISITES The following items should be completed pr ior to installing the Total Access 1224: 1. Make sure that the netw ork feed is in place. 2. Make sure that local power is available and that the required fuses are insta lled. CA UTION The maximum power draw for th e Total Access 12[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-4 61179621L1-5C INSTALLA TION STEPS The following steps are required to install the Total Access 1224. Each step has an associated procedure which is referenced below the step. Each procedure provides detailed information for completing the step. 1. Mount the Total[...]

Installation Steps 61179621L1-5C 3-5 Mounting the T otal Access 1224 The Total Access 1224 is shipped with two sets of mounting brackets that accommodate either a 19-inch or 23-inch rack. • The mounting brackets u sed for a 19-inch rack are part number 32 65540. • The mounting brackets u sed for a 23-inch rack are part number 32 65541. The moun[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-6 61179621L1-5C Flush-mount For flush-mount syste ms, the Total Access 1224 must be mounted from the front of the rack , with mounting brackets in the flush-mounting orientation (see Figure 3-2 ). When flush- mounting a Total Access 1224 in the rack, use a #2 phill[...]

Installation Steps 61179621L1-5C 3-7 Mid-mount For mid-mount systems, the Tota l Access 1224 must be mounted from the rear of the rack, with mounting brackets in the mid-mounting or ientation (see Figure 3-3 ). For mid-m ounting a Total Access 1224 in the rack, use a #2 phillips-head screwdriver and attach the mounting brackets, with the flanges co[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-8 61179621L1-5C Gr ound Connection The ground wire must b e 12 to 18 AWG, however, it must be as large or larger than the w ire used for power. The Total Access 1224 must be grounded to a reliable grounding source. To connect the ground wire, perform the following [...]

Installation Steps 61179621L1-5C 3-9 P o wer Connection The Total Access 1224 provides redu ndant power inputs. Two sources of – 48 VDC must be provided to use the redundant power featur e. The power wires must be 12 to 18 AWG stranded copper. The Total Access 1224 uses a four-point terminal block (see Figure 3-5 ) to accept the –48 VDC and –[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-10 61179621L1-5C F ans/F an Filter The Total Access 1224 is shipped with a pre-ins talled fan module (P/N 1179675L1 ). The fan module is located o n the right side of the unit, and contain s four fans (see Figure 3-6 ). The fans move filtered air (if the f ilter is[...]

Installation Steps 61179621L1-5C 3-11 Ether net Connection The Total Access 1224 inter faces with networks for management through an Ethernet port (see Figure 3-7 ). Figure 3-7. Total Access 1224 Ethernet Port The following Ethernet protocols are supported: • IEEE 802.3, 10/100Base-T • IEEE 802.1Q • IEEE 802.1P User Defined VLAN Priority (ups[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-12 61179621L1-5C Alar m Connections The Total Access 1224 provides an Type SP15 connector (see Figure 3-8 ) with three auxiliary alarm inputs and three alarm outputs (Major, Mino r, and Critical). If load shedding is active then the Critical alarm output will be ac[...]

Installation Steps 61179621L1-5C 3-13 Netw or k Connections Network connections are accomplished via the 50-pin amphenol connector labeled T1/E1 1-4 (see Figure 3-9 ). See Table 3-4 for the pinout of the T1/E1 interface. Figure 3-9. Total Access 1224 Network Connection T able 3 -4. T1/E1 Interface Pinout Pin Numbers Description 1, 26 RX Tip/Ring 1 [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-14 61179621L1-5C ADSL2+ Plus PO TS Connections The Total Access 1224 utilizes two 25-pair amphenol connectors (see Figure 3-10 ), which are used as follows: • One amphenol for connection to the POTS pairs • One amphenol for connection t o the ADSL2+ plus POTS p[...]

Installation Steps 61179621L1-5C 3-15 PO TS Connection The Total Access 1224 must be co nnected to a POTS source to pr ovide POTS to the customers. In a standard configuration, the POTS will be brought in from a nearby cross-connect. The Total Access 1224 accepts the POTS signal on the amphenol connector labeled POTS PORTS 1-24 . There is a one-to-[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-16 61179621L1-5C T able 3-5. POTS and ADSL+PO TS Cable Pin Assignments for Left-most Connector s Pair # Pins R.T . Pair # Pins R.T . 1 1, 26 13 13, 38 2 2, 27 14 14, 39 3 3, 28 15 15, 40 4 4, 29 16 16, 41 5 5, 30 17 17, 42 6 6, 31 18 18, 43 7 7, 32 19 19, 44 8 8, 3[...]

Quick Turn-up Steps 61179621L1-5C 3-17 QUIC K T UR N-UP STEPS Perform the following steps to complete a basic T1 turn-up of the Total Access 1224 system: 1. Connect VT100 t erminal or personal comput er emulating a VT100 terminal to the Tot al Access 1224 craft port. For more information, ref er to “Craft Interface” on page 5-1. 2. Press C TRL [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-18 61179621L1-5C Figure 3-12. Total Access 1224 Main Menu 5. Provision the appr opriate network terminat ion. 6. From the Total Access 1224 Main menu, select Network Port , and press E NTER . The Network Port menu (see Figure 3-13 ) displays. Figure 3-13. Network P[...]

Quick Turn-up Steps 61179621L1-5C 3-19 8. The T1 Main Menu (see Figure 3-14 ) displays. Figure 3-14. T1 Main Menu 9. From the T1 Main Menu, select T1 Provisioning , and press E NTER . The T1 Provisioning menu (see Figure 3-15 ) displ ays. Figure 3-15. T1 Provisioning Screen TID: HSVL00001 Total Acces s 1224 MM /DD/YY HH:MM Unacknowledged A larms: N[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-20 61179621L1-5C 10. From the T1 Provisioni ng menu, configure the Ty p e , Framing , Line Code , and Line Build Out setting to match the settings of the T1DS1s provided. Press N to access the next T1/DS1 to configure and continue this process unt il all the T1/DS1[...]

Quick Turn-up Steps 61179621L1-5C 3-21 30. Add the IP ad dress to the network routers/servers. 31. Press E SC until the System Management menu displays. 32. From the System Management menu, select T est IP Address , and press E NTER . The Test IP Address menu is displayed (see Figure 3-16 ). Figure 3-16. Test IP Address Menu 33. From the Test IP Ad[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 3-22 61179621L1-5C This page is intentionally blank.[...]

61179621L1-5C 4-1 Section 4 Pr o v isioning Def aults INTRODUCTION The Total Access 1224 system default provisioning options are shown in Table 4-1 . For detailed information o n the Total Access 122 4 menus, refer to “Section 5, User Interface” . T able 4-1. Default Pr o visioning Options Provisioning Option A vailable Options Default Setting [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 4-2 61179621L1-5C Password Control Set Login Name User defined Not configured Access Level Read Only; Technician; System Administra tor Not configured Control Level Read Only; Read/Write Not configured Allow SNMP Security Management Enabled; Disabled Disabled Set Men[...]

Introduction 61179621L1-5C 4-3 SNMP Community Names Name 32-character string private * public IP Address 0–255.0–255.0–2 55.0–255 0.0.0.0 Privileges Read/Write; Read Read SNMP Trap Hosts Trap Port 1–65535 162 IP Address 0–255.0–255.0–2 55.0–255 Not configured Version SNMPv1; SNMPv2 Not Configured SNMP Traps Enabled SNMP Traps Enab[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 4-4 61179621L1-5C * SNMP Community Names are case-sensit ive. The Total Access 1224 system provides two SN MP Community Name accounts with the following default s: • Name: private • IP Address: 0.0.0.0 • Privileges: Read/Write • Name: public • IP Address: 0[...]

61179621L1-5C 5-1 Section 5 User Interface INTRODUCTION This section provid es detailed information on the following: • “System Management” on page 5-1 • “Logging on to the Total Access 1224” on page 5-3 • “Menu Structure” on page 5-4 • “Menu Navigation” on page 5-5 • “Menu Tree” on page 5-7 • “Menu Descriptions”[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-2 61179621L1-5C Most personal computers or laptops can run co mmunications software that emula tes a VT100 terminal. Windows programs such as Terminal or HyperTerminal are two such examples in the Windows format, but there are many other adequate, commercially avai[...]

Logging on to the Total Access 12 24 61179621L1-5C 5-3 LOGGING ON TO THE T OTAL ACCESS 1224 To logon to the Total Acces s 1224 sy stem, perform the following steps: 1. Establish the physical connection to the Total Access 1224. 2. If a craft port session is being used, proceed to step 3 . If us ing a Telnet session proceed to step 4 . 3. Press C TR[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-4 61179621L1-5C MENU STR UCTUR E The menu structure for the Total Access 1224 is a layered menu tree. Each la yer of the menu tree is displayed as a menu or a screen. Menu A menu is a display that provides numbered selections that are used to navigate to related me[...]

Menu Navigation 61179621L1-5C 5-5 MENU NAVIGA TION Basic menu navigation is a ccomplished by se lecting the desired option number and then pressing E NTER . To return to the previous menu, press the E SC (escape) key. To access the System Help screen, press the question mark ( ? ) key. Hot K eys Table 5-1 shows the general keyboard c ommands, and T[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-6 61179621L1-5C P This hot key is used to display the previous port. N This hot key is used to display the next port. S This hot key is used to select a specific port. T This hot key is used to toggle between the Near End and Far End performance monitoring data. AD[...]

Menu Tree 61179621L1-5C 5-7 * After creating a profile, provisioning is not up dated until the profile changes from Inac tive to Active. To unassign ports on a profile, simply change the state to In active and change the ports to “0” and this remove s them. MENU T R EE There are a number of me nu scr eens designed to aid in the maintenance and [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-8 61179621L1-5C Figure 5-3. Total Access 1224 Main Menu Tree 1. Configuration Unit Name CLEI Code Part Number Product Revision Serial Number Software Revision 2. A TM Circuit Management 1. A TM PVC/PVP Management 2. A TM Traffic Parameter Defaults 3. Restore A TM D[...]

Menu Tree 61179621L1-5C 5-9 Figure 5-4. System Management Menu Tree 1. Set Passwords 2. Allow SNMP Security Management 3. Set Menus Idle Logout T ime 5. Set TL1 Inband Idle Logout T ime 4. Set TL1 Menus Idle Logout T ime 6. Restore Default Passwords 1. IP Address 2. Ping T imeout 3. Number of Pings 4. Start Ping IP Feed - IP over A TM 2. Mode 3. Co[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-10 61179621L1-5C Figure 5-4. System Management Menu Tree (Continued ) B 13. Expansion Menu 12. External Alarms 1. Mode 2. Clear Packet Counts System Uptime 2. Alarm #2 1. Alarm #1 3. Alarm #3 4. Severity 5. Severity 6. Severity 7. Fan Alarm Delay 1. Enabled 2. Disa[...]

Menu Tree 61179621L1-5C 5-11 Figure 5-5. Network Port Menu Tree 1. T1/E1 Provisioning 2. T1/E1 Status 3. T1/E1 Performance 1. IMA Configuration 2. Framing (T1/E1) 3. Line Code (T1/E1) 1. IMA Group PM 2. Facilities PM 3. Clear All IMA Links PM IMA Firmware Revision IMA Link T ype 2. IMA 1. Enable 2. Disable 2. Provisioning 3. Status/Failure Monitori[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-12 61179621L1-5C Figure 5-6. DSL Menu Tree 1. ADSL Provisioning 2. ADSL Status 3. ADSL Performance 1. Display PM for Current Port 2. Clear All PM for All Ports 1. ADSL Status 2. All ADSL Ports Status 3. A TU-R Information 4. BA T/SNR T ables 1. DSL Profiles 2. Alar[...]

Menu Descriptions 61179621L1-5C 5-13 MENU DESCRIPTIONS Main Menu Main Menu The Total Access 1224 Main menu (see Figure 5-7 ) is the access point to all other operations. The Main menu options have several function s a nd submenus that identify and provide access to specific operations and paramete rs. Figure 5-7. Total Access 1224 Main Menu The To[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-14 61179621L1-5C 7 System Event Log This option displays the “System Event Log Scr een” on page 5-159. 8 Contact Inform ation This option displays the “Contact Information Screen” on page 5-1 61. 9 Enter TL1 Mode This option displays the “TL1 Mode Screen?[...]

Menu Descriptions 61179621L1-5C 5-15 Configur a tion Scr een Configuration Main Menu Configuration The Configuration screen (s ee Figure 5-8 ) displays information about the system. For instance, the CLEI Code and Part Number can be used to search for related information on the ADTRAN web site or to o rder additional parts. Th e software re visio[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-16 61179621L1-5C A TM Circuit Mana gement Menu ATM Circuit Management Main Menu A TM Circuit Management The ATM Circuit Management menu (see Figure 5-9 ) contains the steps used to provision and maintain customer circuits. From this menu, a Per manent Virtual Cir[...]

Menu Descriptions 61179621L1-5C 5-17 PV C/PVP Managem ent Menu PVC/PVP Management Main Menu A TM Circuit Management PVC/P VP Management NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-87), the Select Shelf menu (see Figure 5-10 ) displays . A host or client unit must be chosen in order to access the PVC/PVP Managemen[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-18 61179621L1-5C Figure 5-11. PVC/PVP Management Menu The PVC/PVP Management hot keys are shown in Table 5-9 . T able 5-6. PVC/PVP Management Hot Keys Hot Key Description Func tion C Create a new PVC /PVP This hot key dis plays the “Create a New PVC/PVP Screen”[...]

Menu Descriptions 61179621L1-5C 5-19 Create a New PV C/PVP Scr een Create New PVC/PVP Main Menu A TM Circuit Management PV C/PVP Management Create New PVC/PVP The Create a New PVC/PVP screen (see Figure 5-12 ) is used to create the PVC/PVPs for ADSL connections. Each ADSL connection has at leas t one PVC/ PVP per ATM circuit p rovisioned for [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-20 61179621L1-5C Service This field ide ntifies ATM Traf fic Class. There are four service options (Traffic Descriptors) available for the Total Access 1224 system: •U B R •C B R •V B R - r t •V B R - n r t The options available for each ser vice and their [...]

Menu Descriptions 61179621L1-5C 5-21 Delete an Existing PV C/PVP Screen Delete Existing PVC/P VP Main Menu A TM Circuit Management PV C/PVP Management Delete Existing PVC/PVP When the D hot key is selecte d to delete a PVC/PVP, a confir mation prompt at the bottom of the screen (see Figure 5-13 ) displays. Figure 5-13. Delete an Existing PVC/P[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-22 61179621L1-5C Modify an Existing PV C/PVP Screen Modify Existing PVC/PVP Main Menu A TM Circuit Management PV C/PVP Management Modify Existing PVC/PVP The Modify an Existing PVC/PVP screen (see Figure 5-14 ) is used to modify existing PVC/ PVPs. Figure 5-1[...]

Menu Descriptions 61179621L1-5C 5-23 Service This field identifies ATM Traffic Class. There are four service options (Traffic Descriptors) available for the Total Access 1224 system: •U B R •C B R •V B R - r t •V B R - n r t The options available for each ser vice and their desc riptions are shown in Table 5-10 . Circuit ID This field displ[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-24 61179621L1-5C Cur rent A TM O AM Statistics Menu Current A TM OAM Stati stics Main Menu A TM Circuit Management PV C/PVP Management Current A TM OAM Statistics The Current ATM Operations and Main tenance (OAM) Statistic s menu (see Figure 5-15 ) displays t[...]

Menu Descriptions 61179621L1-5C 5-25 The Current ATM OAM S tatistics menu fields are sho wn in Table 5-12 . T able 5-12. Cur rent A TM O AM Stat istics Menu Fields Field Description Endpoint 1 Rx OAM Cells This field displays the total nu mber of received OAM cells for Endpoint 1. AIS State This field indicates if the Endpoint is in AIS state (True[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-26 61179621L1-5C OAM Loopback Test Menu OAM Loopback Test Main Menu A TM Circuit Management PV C/PVP Management Current A TM OAM Statistics OAM Loopback T est The OAM Loopback Test menu (see Figure 5-16 ) displays the network and line side infor- mation for[...]

Menu Descriptions 61179621L1-5C 5-27 The OAM Loopback Test menu fields are shown in Table 5-14 . 4 Send from Endpoint 1 to Network This option is used to initia te a loopback from Endp oint 1 to the network. 5 Send from Endpoint 2 to Customer This option is used to initia te a loopback from Endp oint 2 to the customer. 6 Reset Loopback Statistics T[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-28 61179621L1-5C Endpoint 2 (Net <-- Cust) Tx Loopback Request This field displays the total num ber of transmitted loopback requests. Rx Loopback Request This field displays the total number of received loopback requests. Tx Loopback Response This field display[...]

Menu Descriptions 61179621L1-5C 5-29 Cur rent A TM PV C P erfor mance Menu Current ATM PVC Performance Main Menu A TM Circuit Management PV C/PVP Management Current A T M PVC Performance The Current ATM PVC Performance menu (se e Figure 5-17 ) displays the network and port side information for each ATM circuit. Figure 5-17. Current ATM PVC Pe[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-30 61179621L1-5C The Current ATM PVC Performance menu fields are shown in Table 5-16 . T able 5-16. Cur rent A TM P or t P erf or mance Menu Fields Field Description Endpoint 1 (Net --> Cust) Tx Cells This field displays the total number of transmit cells for En[...]

Menu Descriptions 61179621L1-5C 5-31 A TM Quic k Pro visioning Menu ATM Quick Provisioning Main Menu A TM Circuit Management PV C/PVP Management A TM Quick Provisioning The ATM Quick Provisioning menu (see Figure 5-18 ) is used to quickly create ATM circuits based on referenc e circuits. Figure 5-18. ATM Quick Provisioning Menu The ATM Quick [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-32 61179621L1-5C Figure 5-19 shows the ATM PVC/PVP Managem ent me nu after creating new ATM circuits using the ATM Quick Provisioning menu with the settings shown in Figure 5-18 . Figure 5-19. ATM PVC/PVP Management Menu with 24 PVCs Page 1 of 5 PVC/PVP Manag ement[...]

Menu Descriptions 61179621L1-5C 5-33 A TM Traf fic Parameter Defaults Scr een ATM Traffic Parameter Defaults Main Menu A TM Circuit Management A TM T raffic Parameter Defaults The ATM Traffic Parameter Defaults screen (see Figure 5-20 ) displays th e system defaults for the ATM circuits. Traffic parameters represent priorities given to ATM cell [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-34 61179621L1-5C R estore A TM F actor y Defaults Menu Restore ATM Factory Defaults Main Menu A TM Circuit Management Restore A TM Factory Defaults The Total Access 1224 prov isioning system provides the abilit y to restore the ATM parameters to the factory def[...]

Menu Descriptions 61179621L1-5C 5-35 A TM Perf or mance Monitoring Mode Men u ATM Performance Monitoring Mode Main Menu A TM Circuit Management A TM Performance Monitoring Mode NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-87), the Select Shelf menu (see Figure 5-22 ) displays . A host or client unit must be chosen[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-36 61179621L1-5C Figure 5-23. ATM Performance Monitoring Mode Menu The ATM Performance Mo nitoring Mode menu opt ions are shown in Table 5-20 . T able 5-20. A TM Perf or mance Monitoring Mode Menu Options Option Description Functio n 1 Change ATM Port Number This o[...]

Menu Descriptions 61179621L1-5C 5-37 A TM P erforman ce Monitoring Status Screen ATM Performance Monitoring Status Main Menu A TM Circuit Management A TM Performance Monitoring Mode A TM Perf ormance Monitoring Status The ATM Performance Monitoring Status screen (see Figure 5-24 ) displays the port perfor- mance for the port selected. This me[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-38 61179621L1-5C The ATM Performance Monitoring Status hot keys are shown in Table 5-22 . T able 5-21. A TM Performance Mo nitoring Status Scree n Fields Field Description Port This field displays the p ort nu mber for the cell count summary. TX (to net) This field[...]

Menu Descriptions 61179621L1-5C 5-39 A TM P or t Cell Count Summar y Scre en ATM Port Cell Count Summary Main Menu A TM Circuit Management A TM Performance Monitoring Mode A TM Por t Cell Count Summary The ATM Port Cell Count Summary screen (see Figure 5-25 ) displays a summary of cell counts for all ports si multaneously. Figure 5-25. ATM Po[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-40 61179621L1-5C Clear All PM for All P or ts Menu Clear All PM for All Ports Main Menu A TM Circuit Management A TM Performance Monitoring Mode Clear All PM for All Ports The Clear All PM for All Ports menu (see Figure 5-26 ) is selected from the ATM Perform[...]

Menu Descriptions 61179621L1-5C 5-41 A TM OAM Settings Menu ATM OAM Setti ngs Main Menu A TM Circuit Management A TM OAM Settings The ATM OAM Settings menu (see Figur e 5-27 ) is used to provision the Total Access 1224 OAM settings and to test the Inband channel PVC for an ATM fed system. Figure 5-27. ATM OAM Settings Menu The ATM OAM Settings [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-42 61179621L1-5C Inband O AM Loopback T est Menu Inband OAM Loopback Test Main Menu A TM Circuit Management AT M O A M S e t t i n g s Inband OAM Loopback T est The Inband OAM Loopback Test menu (see Figure 5-28 ) is used to provision the Total Access 1224 OA[...]

Menu Descriptions 61179621L1-5C 5-43 The Inband OAM Loopback Test menu fields are shown in Table 5-27 . T able 5 -27. Inband O AM Loopback T est Menu Fields Field Description Port This field displays the physical port. VPI This field displays the VPI for the circuit. VCI This field displays the VCI for the circuit. Tx Loopback Request This field di[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-44 61179621L1-5C System Management Menu System Management Main Menu System Management The System Management menu (see Figure 5-29 ) is used to manage system settings. The following subsections descr ibe these settings in detail. Figure 5-29. System Management Men[...]

Menu Descriptions 61179621L1-5C 5-45 7 SNMP/TL1 This option displays the “SNMP/TL1 Configuration Menu” on page 5-68. 8 Download New Code This option displays the “Code Download Method Menu” on page 5-74. 9 Restore Factory Def aults This option displays the “Res tore Factory Defaults Menu” on page 5-81. 10 Reset System This opt ion displ[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-46 61179621L1-5C Pass wor d Contr ol Menu Password Control Main Menu System Management Password Control The Password Control menu (see Figur e 5-30 ) is used to set and mo dify passwords, lo gout times, and restore default passwords. The system provides up to e[...]

Menu Descriptions 61179621L1-5C 5-47 Pass word Control Lev els Scr een Password Control Levels Main Menu System Management Password Control Password Control Levels The Password Control Levels screen (see Figure 5-31 ) is used to manage the usernames and associated passwords that access the system. Figure 5-31. Password Control L evels Screen [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-48 61179621L1-5C 5. Enter the password again when prompted to verify, and press E NTER . 6. Press the T AB key to navigate to the Access Level field. The Access Level field displays in reverse video. 7. Press the s pacebar to change the access level, and press E NT[...]

Menu Descriptions 61179621L1-5C 5-49 Mode Selection and Cur rent IP Se ttings Menu Mode Selection and Current IP Settings Main Menu System Management Mode Selection and Cu rrent IP Settings To remotely manage the Total Ac cess 1224 system , the IP settings must be configured using the Mode Selection and Current IP Settings menu (see Figure 5-32[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-50 61179621L1-5C NO TE The Media Access Control (MAC) ad dress, which is set at the factory, is required to configure the DHCP server. T able 5-31. Mod e Selection and Cur r ent IP Settings Menu Items Option Descrip tion Function 1 IP Feed This option provides 3 ch[...]

Menu Descriptions 61179621L1-5C 5-51 Static IP Settings - for IP over ATM Menu Static IP Settings - for IP over ATM Main Menu System Management Mode Selection and Current IP Settings Static IP Settings - for IP over A TM The Static IP Setting s - for IP over ATM menu (see Figure 5-33 ) is used to manually provision all of the IP settings. Fig[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-52 61179621L1-5C NO TE The Media Access Control (MAC) a ddress is set at the factory. 5 Default Gateway This option is used to configure the Default Gateway. The Default Gateway is used to forward traffic to a destination outside of the subnet of the Total Access 1[...]

Menu Descriptions 61179621L1-5C 5-53 Restore IP Factory Defaults Menu Restore IP Factory D efaults Main Menu System Management Mode Selection and Current IP Settings Static IP Settings - for IP over A TM Restore IP Factory Defaults The Restore IP Factory Defaults menu (see Figure 5-34 ) is used to res et all IP settings to the factory defau[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-54 61179621L1-5C Dynamic IP Settings - for IP over ATM Menu Dynamic IP Settings - for IP over ATM Main Menu System Management Mode Selection and Current IP Settings Dynamic IP Settings - for IP over A TM The Dynamic IP Settings - for IP over ATM menu (see Fig[...]

Menu Descriptions 61179621L1-5C 5-55 NO TE The Media Access Control (MAC) a ddress is set at the factory. T able 5-34 . Dynamic IP Settings - f or IP o v er A TM Menu Items Option Description Function N/A IP address This option cannot be chan ged. The IP address is automatically retrieved from the DHCP server. N/A Subnet mask This option cannot be [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-56 61179621L1-5C Restore IP Factory Defaults Menu Restore IP Factory D efaults Main Menu System Management Mode Selection and Current IP Settings Dynamic IP Settings - for IP over A TM Restore IP Factory Defaults The Restore IP Factory Defaults menu (see Fig[...]

Menu Descriptions 61179621L1-5C 5-57 Static IP Settings - for IP over Ethernet Menu Static IP Settings - for IP over Ethernet Main Menu System Management Mode Selection and Current IP Settings Static IP Settings - for IP over Ethernet The Static IP Setting s - for IP over Ethernet menu (see Figure 5-37 ) is used to manually provision all of t[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-58 61179621L1-5C NO TE The Media Access Control (MAC) a ddress is set at the factory. T able 5 -36. Static IP Settings - f or IP o ver Ether net Menu Options Option Description Function 1 IP address This option is used to configure the IP address in decimal dot for[...]

Menu Descriptions 61179621L1-5C 5-59 Restore IP Factory Defaults Menu Restore IP Factory D efaults Main Menu System Management Mode Selection and Current IP Settings Static IP Settings - for IP over Ethernet Restore IP Factory Defaults The Restore IP Factory Defaults menu (see Figure 5-38 ) is used to res et all IP settings to the factory d[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-60 61179621L1-5C Dynamic IP Settings - for IP over Ethernet Menu Dynamic IP Settings - for IP over Ethernet Main Menu System Management Mode Selection and Current IP Settings Dynamic IP Settings - for IP over Ethernet The Dynamic IP Settings - for IP over Eth[...]

Menu Descriptions 61179621L1-5C 5-61 NO TE The Media Access Control (MAC) a ddress is set at the factory. T able 5-38. Dyna mic IP Settings - for IP o ver Ether net Menu Items Option Description Function N/A IP address This option cannot be chan ged. The IP address is automatically retrieved from the DHCP server. N/A Subnet mask This option cannot [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-62 61179621L1-5C Restore IP Factory Defaults Menu Restore IP Factory D efaults Main Menu System Management Mode Selection and Current IP Settings Dynamic IP Settings - for IP over Ethernet Restore IP Factory Defaults The Restore IP Factory Defaults menu (se[...]

Menu Descriptions 61179621L1-5C 5-63 T est IP Addr ess Menu Tes t IP Address Main Menu System Management T est IP Address Ping and Traceroute utilities are includ ed on the Test IP Address menu (see Figure 5-41 ) for testing the IP configurations. Figure 5-41. Test IP Address Menu The Test IP Address menu options are shown in Table 5-40 . T abl[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-64 61179621L1-5C Time/Da te Adjust Menu Time/Date Adjust Main Menu System Management Time/Date Adjust The Time/Date Adjust menu (see Figure 5-42 ) is used to set the system time and date. The time and date appear on most scre ens and is used for performance mon[...]

Menu Descriptions 61179621L1-5C 5-65 Cur r ent Baud Rate Menu Current Baud Rate Main Menu System Management Current Baud Rate The Current Baud Rate menu (see Figure 5-43 ) displays the current baud rate. T he default management port bau d rate is 9600 bps. Figure 5-43. Current Baud Rate Menu The Current Baud Rate menu options are shown in Table[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-66 61179621L1-5C TFTP Configur ation Storag e/R etrieval Screen TFTP Configuration Storage/Retrieval Main Menu System Management TF TP Configuration Storage/Retrieval The TFTP Configur ation St orage/Retrieval screen (see Figure 5-44 ) is used to save provi- si[...]

Menu Descriptions 61179621L1-5C 5-67 NO TE For alternate methods to store or retrieve the Total Access 1224 System Configuration Archive (SCA) file see “SNMP/TFTP and TL1 Configuration Storage and Retrieval” on page 6-1. T able 5-4 3. TFTP Configuration Stor age/Retrie val Screen Fields Field Description TFTP Server Press the spacebar to e nter[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-68 61179621L1-5C SNMP/TL1 Configur ation Menu SNMP/TL1 Configuration Main Menu System Management SNMP/TL1 Configuration The Simple Network Management Protocol (SNMP)/TL1 Configuration menu (see Figure 5-45 ) is used to provision contact in formation, community [...]

Menu Descriptions 61179621L1-5C 5-69 SNMP Contact Infor mation Men u SNMP Contact Informa tion Main Menu System Management SNMP/TL1 Configuration SNMP Contact Information The SNMP Contact Information menu (see Figure 5-46 ) contains contact information and can be customized to reflect an y contact, name, and location. Figure 5-46. SNMP Contac[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-70 61179621L1-5C SNMP Community Names Men u SNMP Community Names Main Menu System Management SNMP/TL1 Configuration SNMP Community Names The SNMP Community Names menu (see Figure 5-47 ) is used to establish up to three named accounts which specify unique IP a[...]

Menu Descriptions 61179621L1-5C 5-71 T able 5-46. SNMP Com munity Names Menu Options Option Description Function 1 Name This option is used to configure the first SNMP community. Settings include private and public. 2 IP Address This option is used to configure the first SNMP community IP addr ess in decimal dot fo rmat (i.e., ###.###.###.###). 3 P[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-72 61179621L1-5C SNMP T ra p Hosts Menu SNMP Trap Hosts Main Menu System Management SNMP/TL1 Configuration SNMP T rap Hosts The SNMP Trap Hosts Menu (see Figure 5-48 ) is used to set multiple IP Addresses (trap desti- nations) and SNMP versions for notificati[...]

Menu Descriptions 61179621L1-5C 5-73 NO TE The SNMP version should match th e agent used for SNMP on the network management side. T able 5-47. SNMP T r ap Hosts Menu Options Option Descrip tion Function 1 IP Address This option is used to configure the first SNMP trap host IP address in decimal do t format (i.e., ###.###.###.###). 2 Version This op[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-74 61179621L1-5C Code Download Method Menu Code Download Method Main Menu System Management Code Download Method The Code Download Method menu displa ys two methods to download code (see Figure 5-49 ). Figure 5-49. Code Download Method Menu The Code Download Me[...]

Menu Descriptions 61179621L1-5C 5-75 NO TE The System Management menu TFTP IP addr ess option must be configured to use TFTP. Y -Modem Men u Y-Modem Main Menu System Management Code Download Method Y -Modem The Y-Modem menu (see Figure 5- 50 ) is used to download code st ored from a c o mputer to the Total Access 1224 through the craft port. [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-76 61179621L1-5C 4. Browse to the file containing the code, select Ymodem for the drop-down menu , and select S END . NO TE The code begins transmitting from the terminal emulation package. When the download is complete, the unit restarts au tomatically. NO TE If t[...]

Menu Descriptions 61179621L1-5C 5-77 T able 5-49. TF TP Download Screen Fields Field Description TFTP Server This field displa ys the IP address of the TFTP server . The TFTP IP address must be configured prior to at tempting a TFTP download. Get Code For This field displays the modu le that will be upgraded. TFTP Filename This field displays the T[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-78 61179621L1-5C A uto Upgr ade Configuration (A UC) Status Men u Auto Upgrade Configuration (AUC) Status Main Menu System Management Code Download Method Auto Upgrade Configuration (AUC) St atus The Auto Upgrad e Configurat ion (AUC) Status menu (see Figure [...]

Menu Descriptions 61179621L1-5C 5-79 NO TE Auto Upgrade operations will not be initiated if the AUC Refresh Interval option is set to zero, the AUC Config File option is empty , the configuration file cannot be retrieved from the AUC TFTP Server, or the configuratio n file contains errors. T able 5 -50. Auto Upgra de Configuration (A UC) Status Men[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-80 61179621L1-5C Separate status information is provided for the file retrieval operation and the actual upgrade operation. The Auto Upgrade Co nf iguration (AUC) Status menu st atus fields are defined in Table 5-51 . The three hot keys associated with the Auto Upg[...]

Menu Descriptions 61179621L1-5C 5-81 R estore Factor y Defaults Menu Restore Factory Defaults Main Menu System Management Restore Factory Defaults The Restore Factory Defaults menu (see Figure 5- 53 ) is used to remotely restore the system to factory defaults. CA UTION This action is service affecting. If the system is a ccessed remotely throug[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-82 61179621L1-5C R eset System Menu Reset Sy stem Main Menu System Management Reset System The Reset System menu (see Figure 5-54 ) is used t o reboot th e entire sy stem. CA UTION This action is service affecting. If the system is a ccessed remotely through a [...]

Menu Descriptions 61179621L1-5C 5-83 Self T est Menu Self Test Main Menu System Management Self T est NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-87), the Select Shelf menu (see Figure 5-55 ) displays . A host or client unit must be chose n in order to access the Self Test menu. Figure 5-55. Select Shelf Menu The[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-84 61179621L1-5C Figure 5-56. Self Test Menu The Self Test menu option is shown in Table 5-55 . T able 5-55. Self T est Menu Option Option Description Function 1 Run Fan Self Test This option initiates the Total Acce ss 1224 fan self test. TID: HSVL00001 Total Acce[...]

Menu Descriptions 61179621L1-5C 5-85 Exter nal Alar ms Me nu External Alarms Main Menu System Management External Alarms The External Alarms menu (see Figure 5-57 ) is used to customize the profiles for up to three external alarms. The alarms can be assigned unique names and an associated severity level (refer to “External Alarm Severity Menu[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-86 61179621L1-5C Exter nal Alar m Sev erity Menu External Alarm Severity Main Menu System Management External Alarms External Alarm Severity The External Alarm Severity menu (see Figure 5-58 ) is used to set customize d alarm profiles for each of the three ex[...]

Menu Descriptions 61179621L1-5C 5-87 Expansion Menu Expansion Main Menu System Management Expansion The Expansion Menu (see Figure 5-59 ) is used to enable or disa ble expansion capabilities for up to four Total Access 1224 un its (one host and three clients) . The expansion mode can only be enabled on the host units. Figure 5-59. Expansion Men[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-88 61179621L1-5C Netw or k P or t Menu Network Port Main Menu Network Port The Network Port menu (see Figure 5-60 ) is used to view T1 or E1 circuits, configure the IMA Group, and access the T1 or E1 interfaces. Figure 5-60. Network Port Menu NO TE The proper mod[...]

Menu Descriptions 61179621L1-5C 5-89 T1 Main Menu T1 Main Menu Main Menu Network P ort T1 Main Menu From the T1 Main Menu (see Figure 5-61 ), all T1 provisioning, st atus reporting and perfor- mance monitoring can be viewed. Figure 5-61. T1 Main Menu The T1 Main Menu options are shown in Table 5-61 . T able 5 -61. T1 Main Menu Options Option De[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-90 61179621L1-5C T1 Pro visioning Menu T1 Provisioning Main Menu Network P ort T1 Main Menu T1 Provisioning The T1 Provisioning scree n (see Figure 5-62 ) displays the current T1 settings. Figure 5-62. T1 Provisioning Menu The T1 Provisioning menu options are[...]

Menu Descriptions 61179621L1-5C 5-91 T able 5-62. T1 Pr o visioning Menu Options Option Description T1 Functio n 1 Type This field displays the T1 circuit type. 2 Framing This field displays the framing setting for the T1 circuit. Settings include the following: •S F •E S F 3 Line Code This field displays the line code setting for the T1 circ u[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-92 61179621L1-5C T1 Status Men u T1 Status Main Menu Network P ort T1 Main Menu T1 Status The T1 Status menu (see Figure 5-63 ) displays the statu s of the T1 net work circuits and a summary of the associated alarm counts. Figure 5-63. T1 Status Menu The T1 S[...]

Menu Descriptions 61179621L1-5C 5-93 T able 5-63. T1 Status Menu Options Option Field Function N/A Type This field displays the T1 circuit type. N/A Framing This field displays the framing setting for the T1 circuit. For more information, see Table 5-62 on page 5-91. N/A Line Code This field displays the line code setting for the T1 circ uit. For m[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-94 61179621L1-5C T1 PM Main Menu T1 PM Main Menu Network P ort T1 Main Menu T1 PM The T1 PM Main Menu (see Figure 5-64 ) is used to access the T1 performance monitoring displays in 24-hour and 15-minute increments for the current port selected and to clear al[...]

Menu Descriptions 61179621L1-5C 5-95 T1 Performance Monitoring Status Screen T1 Performance Monitorin g Status Main Menu Network P ort T1 Main Menu T1 PM T1 Performance Monitoring Status The T1 Performance Monitori ng Status scree n (see Figure 5-65 ) displays performance monitoring in 24-hour and 15-minute incr ements for the current port [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-96 61179621L1-5C T1 T est Menu T1 Test Main Menu Network P ort T1 Main Menu T1 T est Figure 5-66 shows the T1 Test Menu. Figure 5-66. T1 Test Menu The T1 Test Menu options are shown in Table 5-66 . T able 5-66. T1 T est Menu Options Option Definition Function[...]

Menu Descriptions 61179621L1-5C 5-97 R estore T1 Factor y Defaults Menu Restore T1 Factory Defaults Main Menu Network P ort T1 Main Menu Restore T1 Factory Defaults The Restore T1 Factory Defaults menu (see Figure 5-67 ) provides the option to restore the line settings for all T1 ports. CA UTION This action is service affecting. If the system[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-98 61179621L1-5C E1 Main Menu E1 Main Menu Main Menu Network P ort E1 Main Menu From the E1 Main Menu (see Figure 5-68 ), all E1 provisioning, st atus reporting and perfor- mance monitoring can be viewed. Figure 5-68. E1 Main Menu The E1 Main Menu options are s[...]

Menu Descriptions 61179621L1-5C 5-99 E1 Pro visioning Menu E1 Provisioning Main Menu Network P ort E1 Main Menu E1 Provisioning The E1 Provisioning screen (see Figure 5-69 ) displays th e current E1 settings. Figure 5-69. E1 Provisioning Menu The E1 Provisioning menu fields are shown in Table 5-69 . T able 5-69. E1 Pr o visioning Menu Options[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-100 61179621L1-5C E1 Status Men u E1 Status Main Menu Network P ort E1 Main Menu E1 Status The E1 Status Menu (see Figur e 5-70 ) displays the status of the E1 network circuits and a summary of the associated alarm counts. Figure 5-70. E1 Status Menu The E1 S[...]

Menu Descriptions 61179621L1-5C 5-101 E1 PM Main Menu E1 PM Main Menu Main Menu Network P ort E1 Main Menu E1 PM Main Menu The E1 PM Main Menu (see Figure 5-71 ) is used to access the E1 performance monitoring displays in 24-hour and 15-minute increme nts fo r the curre nt port selected and to clear all E1 performance monitoring data. Figure [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-102 61179621L1-5C E1 Perf or mance Monitoring Status Screen E1 Performance Monitoring Status Main Menu Network P ort E1 Main Menu E1 PM Main Menu E1 Performance Monito ring Status The E1 Performance Monitoring Status screen (see Figure 5-72 ) displays perfo[...]

Menu Descriptions 61179621L1-5C 5-103 E1 T est Menu E1 Test Main Menu Network P ort E1 Main Menu E1 T est Figure 5-73 shows the E1 Test Menu. Figure 5-73. E1 Test Menu The E1 Test Menu options are shown in Table 5-73 . T able 5-73. E1 T est Menu Options Option Definition Function 1 Payload Loopback This option is used to sele ct a payload loo[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-104 61179621L1-5C R estore E1 Factor y Defaults Menu Restore E1 Factory Defaults Main Menu Network P ort E1 Main Menu Restore E1 Factory Defaults The Restore E1 Factory Defaults menu (see Figure 5-74 ) provides the option to restore the line settings for all [...]

Menu Descriptions 61179621L1-5C 5-105 IMA Main Menu IMA Main Menu Main Menu Network P ort IMA Main Menu The Total Access 1224 system is fed by virtual circuits using IMA. The IM A Main menu (see Figure 5-75 ) is the central point for managing and provisioning the Total Access 1224 IMA related option s. Figure 5-75. IMA Main Menu The IMA Main Me[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-106 61179621L1-5C IMA Configuration Screen IMA Configuration Screen Main Menu Network P ort IMA Main Menu IMA Configuration Screen The IMA Configuration screen (see Figure 5-76 ) displays the IMA Firmware Revision and IMA Link type. This screen is information[...]

Menu Descriptions 61179621L1-5C 5-107 IMA Pro visioning Menu IMA Provisioning Main Menu Network P ort IMA Main Menu IMA Provisioning The IMA Provisioning menu (see Figure 5-77 ) is used to provision and maintain IMA functions. Figure 5-77. IMA Provisioning Menu The IMA Provisioning menu optio ns are shown in Table 5-76 . T able 5-76. IMA Pr o[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-108 61179621L1-5C IMA Facility Provisioning Menu IMA Facility Provisioning Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Facility Provisioning The IMA Facility Provisioning menu (see Figure 5-78 ) provides provisioning of the IMA links on a per[...]

Menu Descriptions 61179621L1-5C 5-109 IMA All Faciliti es Provisioning Scr een IMA All Facilities Provisioning Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Facility Provisioning IMA All Facilities Provisioning The IMA All Facilities Provisioning screen (see Figure 5-79 ) provides a summary of all the IMA facilities. Figure 5[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-110 61179621L1-5C Operation Mode for Facility Menu Operation Mode for Facility Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Facility Provisioning IMA All Facilities Provisioning Operation Mode for Facility The Operation Mode fo r Facility [...]

Menu Descriptions 61179621L1-5C 5-111 IMA Group Provisioning Menu IMA Group Provisioning Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Group Provisioning The IMA Group Provisioning menu (see Figure 5-81 ) is used to provisio n the IMA Group. An IMA Group is a collection of ph ysical links bundled together. NO TE The IMA Group m[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-112 61179621L1-5C T able 5-80. IMA Gr oup Pr o visioning Menu Options Option Description Fun ction 1 Group Operation Mode The IMA Group must be Out of Service-Unass igned in order to change the options. If the IMA Group is In Service or Out of Service-Maintenance, [...]

Menu Descriptions 61179621L1-5C 5-113 IMA Shortcut Setup Menu IMA Shor tcut Setup Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Shortcut Setup The IMA Shortcut Setup menu (see Figure 5-82 ) provides shortcuts to facilitate provisioning all of the IMA links simultaneously. To pr ovision IMA links individually, refer to “IMA Fa[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-114 61179621L1-5C IMA Scrambler Menu IMA Scrambler Main Menu Network P ort IMA Main Menu IMA Provisioning IMA Scrambler The IMA Scrambler menu (see Figure 5-83 ) is used to enable or disable s crambling. Scram- bling is designed to randomize the pat tern of[...]

Menu Descriptions 61179621L1-5C 5-115 Restore IMA Factory Defaults Me nu Restore IMA Factory Defaults Main Menu Network P ort IMA Main Menu IMA Provisioning Restore IMA Factory Defaults The Restore IMA Factory Defaults m enu (see Figure 5-84 ) is used to reset the IMA provisioning settings to factory defau lts. CA UTION Depending on the sys[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-116 61179621L1-5C Status/Failure Monitoring Menu Status/Failure Monitoring Main Menu Network P ort IMA Main Menu Status/Failure Monitoring The Total Access 1224 system tracks Failure Mo nitoring (FM) for the IMA group and each of the links. The Status/Failure[...]

Menu Descriptions 61179621L1-5C 5-117 IMA Group 1 Failure Monitoring Status Screen IMA Group 1 Failur e Monitoring Status Main Menu Network P ort IMA Main Menu Status/Failure Monitoring IMA Group 1 Failure Monitoring Status The IMA Group 1 Failu re Monitoring Status scre en (see Figure 5-86 ) displays the status of the group state and the N[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-118 61179621L1-5C T able 5-85. IMA Gr oup 1 Failure Monitoring Status Screen Fields Field Description NE Group State This field disp lays the Near End group sta tus. FE Group State This field displays the Far End group status. NE Failure Status This field displays [...]

Menu Descriptions 61179621L1-5C 5-119 IMA Link Failure Monitoring Status Screen IMA Link Failure Monitoring Status Main Menu Network P ort IMA Main Menu Status/Failure Monitoring IMA L ink Failure Monitoring Status The IMA Link Failure Monito ring Status screen (see Figure 5-87 ) displays the states for all of the facilities. Figure 5-87. I[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-120 61179621L1-5C Usable Usable This condition indicates that the link is ready to be used and is awaiting the FE to ac tivate its rece iver before sending any ATM layer cells. IMA frames containing only filler cells are being transmitted; but the link is not in a [...]

Menu Descriptions 61179621L1-5C 5-121 Deleted Not In Group, Deleted This condition indicate s that the link has been removed from the group. This transitional state ensure s that the other end is still not receiving ATM layer cells before it moves to the Unassigned st ate. Fault Unusable, Fault This condition indicates that a fault has been detecte[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-122 61179621L1-5C Usable Usable This condition indicates that the link is ready to be used for receiving ATM layer cells and it is awaiting the FE Tx to be Usable or Active before mo ving into the Active state. The link has been synchronized with the other receive [...]

Menu Descriptions 61179621L1-5C 5-123 IMA Loopback Men u IMA Loopback Main Menu Network P ort IMA Main Menu IMA Loopback The IMA Loopback menu (see Figure 5-88 ) is used to initiate l oopbacks for testing the IMA group. Each IMA Loop back menu option can b e enabled or disabled . Figure 5-88. IMA Loopback Menu The IMA Loopback menu options ar[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-124 61179621L1-5C IMA Pe rfor mance Monitoring Menu IMA Performance Monitoring Main Menu Network P ort IMA Main Menu IMA Performance Moni toring The IMA Performance M o nitoring menu (see Fi gure 5-89 ) is used to track the Total Access 1224 system performanc[...]

Menu Descriptions 61179621L1-5C 5-125 IMA Group 1 Performance Monitoring Status Screen IMA Group 1 Perfo rmance Monitoring Status Main Menu Network P ort IMA Main Menu IMA Performance Mon itoring IMA Group 1 Perform ance Monitoring Status The IMA Group 1 Perf ormance Monitoring Stat us screen displays IMA group performan ce monitoring stati[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-126 61179621L1-5C IMA Performance Monitoring Status Facility 1 Near End PM Data Screen IMA Performance Monitoring Status Facility 1 Nea r End PM Data Main Menu Network Port IMA Main Menu IMA Performance Monitoring IMA Performance Monitoring St atus Facility [...]

Menu Descriptions 61179621L1-5C 5-127 T able 5-91. IMA Facilities Hot K eys Hot Key Description Fun ction B Backward (2hrs/15min PM) This hot key is used to di splay performance monitoring statistics for the last 2 hour s, in 15 minute intervals. C Clear PM Stats This hot key is used to clear the performance monitoring statistics. F Forward (2hrs/1[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-128 61179621L1-5C T1/E1 Menu T1/E1 Menu Main Menu Network P ort T1/E1 Menu The T1/E1 menu (see Figure 5-92 ) is used to specify eith er a T1 or E1 interf ace. Figure 5-92. T1/E1 Menu TID: HSVL00001 Total Acces s 1224 MM /DD/YY HH:MM Unacknowledged A larms: None[...]

Menu Descriptions 61179621L1-5C 5-129 DSL Menus DSL Menus Main Menu DSL Menus Each of the 24 DSL lines has a number of setti ngs that can be provisioned. These settings affect the performance of the line. The class of service to be provisioned on the line and the type of modem at the dist ant end must b e considered. DSL provisioning is accomplis[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-130 61179621L1-5C DSL Provisioning Menu DSL Provisioning Main Menu DSL Menus DSL Provisioning The DSL Provisioning menu (see Figure 5-94 ) provides options to provision the DSL profiles and restore the ADSL provisioning information . Figure 5-94. DSL Provisioni[...]

Menu Descriptions 61179621L1-5C 5-131 ADSL Profiles Menu ADSL Profiles Main Menu DSL Menus DSL Provisioning ADSL Profiles The ADSL Profiles menu (see Figure 5-95 ) is used to apply a set of values to several objects at the same time. At initial setup, all lines are s et to the default values using the “DEFVAL” profile, which cannot be d e[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-132 61179621L1-5C Figure 5-96 displays an example of the Edit ADSL Profiles menu. See Table 5-95 on page 5- 132 for details on ADSL line options. NO TE The Custom Na me reference indicates the user assigned profile name. Figure 5-96. Edit ADSL Profile Menu The Edit[...]

Menu Descriptions 61179621L1-5C 5-133 5 Client 3 This option is used to assign a port to a profile for the third client unit, if enabled. 1-24 None 6 Rate Mode This option is used to select the rate mo de. • Fixed rate provides a fixed transmission speed. • Rate adaptive determines the transf er rate, which allows the line to be used at a great[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-134 61179621L1-5C 15 Interleave Channel Max Delay The maximum dela y allowed for the Interlea ving of data. This option is only available when the Link Type is set t o Interleave. 1 ms to 63 ms 5 ms Upstream Options 16 Target SNR Margin This option indicates the Ta[...]

Menu Descriptions 61179621L1-5C 5-135 Alar m Profile s Men u Alarm Profiles Main Menu DSL Menus DSL Provisioning Alarm Profiles Alarm options for the DSL lines ar e completed by setting up prof iles using the Alarm Profiles menu (see Figure 5-97 ). At initial set up all ports are set to th e default values in the “DEFVAL” profile. This pr[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-136 61179621L1-5C Figure 5-98. Profile Settings for: Custom Name Menu The Profile Settings for: Custom Name menu options are as shown in Table 5-96 . TID: HSVL00001 Total Acces s 1224 Unacknowledged A larms: None Pr ofile Settings fo r: Custom Name 1. State: Inacti[...]

Menu Descriptions 61179621L1-5C 5-137 T able 5-96. Pr ofile Settings for : Custom Name Menu Options Option Description Functio n 1 State This option is used to as sign a state to the profile. 2 Host This option is used to assign a port to the profile for the host unit. 3 Client 1 This op tion is used to assign a port to a profile for the first clie[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-138 61179621L1-5C P or t Pr o visioning Menu Port Provisioning Main Menu DSL Menus DSL Provisioning Port Provisioning NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-87), the Select Shelf menu (see Figure 5-99 ) displays . A host o[...]

Menu Descriptions 61179621L1-5C 5-139 Figure 5-100. Port Provisioning Menu The Port Provisioning options are as shown in Table 5-97 . T able 5-97 . P or t Pr o visioning Menu Options Option Description Functio n 1 Select Port This option is used to desi gnate which port provisioning information is to be entered. 2 ADSL Card Service State This optio[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-140 61179621L1-5C NO TE Use N for next port or P for previous port to select the port to be provisioned. Service State for ADSL Card Menu Service State for A DSL Card Main Menu DSL Menus DSL Provisioning Port Provisioning Service State for ADSL Card The ADS[...]

Menu Descriptions 61179621L1-5C 5-141 Service Mode for Port: # Menu Service Mode for Port : # Main Menu DSL Menus DSL Provisioning Port Provisioning Service Mode for Port: # The Service Mode option on the Port Provisioning Menu displays the Service Mode for Port: # menu. The # represents the value displa yed for th e Se lect Port option . T[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-142 61179621L1-5C Cabinet Mode for Port: # Menu Cabinet Mode for Port: # Main Menu DSL Menus DSL Provisioning Port Provisioning Cabinet Mode for Port: # The Cabinet Mode optio n on the Port Provisioning Menu displays the Cabinet Mo de for Port: # menu (see [...]

Menu Descriptions 61179621L1-5C 5-143 Link Down Alarm for Port: # Menu Link Down Alarm for Port: # Main Menu DSL Menus DSL Provisioning Port Provisioning Link Down Alarm for Port: # The Link Down Alarm optio n on the Port Provisioning Menu displays the Link Down Alarm for Port: # menu. The # represents the valu e displaye d for the Select P[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-144 61179621L1-5C ADSL R estore Menu ADSL Restore Menu Main Menu DSL Menus DSL Provisioning ADSL Restore Menu The ADSL Restore menu (see Figure 5-102 ) provides options to rest ore all ADSL provisioning or select the DSP Management menu. Figure 5-102. ADSL Re[...]

Menu Descriptions 61179621L1-5C 5-145 DSP Management Menu DSP Management Menu Main Menu DSL Menus DSL Provisioning ADSL Restore Menu DSP Management Menu NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-87), the Select Shelf me nu (see Figure 5-103 ) displays. A host or client unit must be chosen in order to access[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-146 61179621L1-5C Figure 5-104. DSP Management Menu The DSP Management menu options are shown in Table 5-105 . T able 5-105. DSP Mana gement Menu Options Option Description Displays 1 Reset All DSPs and reload firmware This option displays the “R eset all DSPs an[...]

Menu Descriptions 61179621L1-5C 5-147 Reset DSP Menu Reset DSP Main Menu DSL Menus DSL Provisioning ADSL Restore Menu DSP Management Menu Reset DSP The Reset DSP Menu (see Figure 5-105 ) selective ly resets individual DSPs. Each DSP operates eight ports as listed in the menu co mmentary when a DSP is selected. Figure 5-105. Reset DSP Menu[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-148 61179621L1-5C Sta tus Menu Status Main Menu DSL Menus Status NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-87), the Select Shelf me nu (see Figure 5-106 ) displays. A host or client unit must be chosen in order to access the St[...]

Menu Descriptions 61179621L1-5C 5-149 Figure 5-107. Status Menu The Status menu options are as shown in Table 5-107 . T able 5-10 7. Status Menu Options Option Description Functio n 1 ADSL Status This option disp lays the “ADSL Status Screen” on page 5-150. 2 All ADSL Ports Status This option displays the “ADSL Ports Status Screen” on page [...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-150 61179621L1-5C ADSL Status Screen ADSL Status Main Menu DSL Menus Status ADSL Status An example of the report returned from selec ting the ADSL Status option is shown in Figure 5-108 . Figure 5-108. ADSL Status Screen TID: HSVL00001 Total Acces s 1224 MM /[...]

Menu Descriptions 61179621L1-5C 5-151 ADSL P or ts Status Scr een ADSL Ports Status Main Menu DSL Menus Status ADSL Ports Status An example of the report re turned from selecti ng the ALL ADSL Ports Status option is shown in Figure 5-109 . Figure 5-109. All ADSL Ports Status Screen TID: HSVL00001 Total Acces s 1224 MM /DD/YY HH:MM Unacknowled[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-152 61179621L1-5C AT U - R I n f o r m a t i o n ATU-R Infor mation Main Menu DSL Menus Status A TU-R Information The ATU-R Information screen (see Figure 5-110 ) provides information for the remote end of the circuit. If the line is trained up in T1.413 mode[...]

Menu Descriptions 61179621L1-5C 5-153 Bit Allocation T able - Link Up Scr een Bit Allocation Table - Link Up Sc reen Main Menu DSL Menus Status Bit Allocation T able - Link Up Screen The Bit Allocation Table - Link Up scree n (see Figure 5-111 ) displays the bits transmitted on each of the tones in the ADSL signal. This info rmation can be he[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-154 61179621L1-5C Figure 5-112. Alternate View of the Bit Allocation Table Screen Press T to view the SNR Margin Table, as shown in Figure 5-113 . Figure 5-113. Upstream SNR Margin Table Screen TID: HSVL00001 Total Acces s 1224 MM /DD/YY HH:MM Unacknowledged A larm[...]

Menu Descriptions 61179621L1-5C 5-155 P erfor manc e Menu Performance Menu Main Menu DSL Menus Performance Menu NO TE If expansion mode is enabled (refer to “Expansion Menu” on page 5-87), the Select Shelf me nu (see Figure 5-114 ) displays. A host or client unit must be chosen in order to access the Performance menu. Figure 5-114. Select S[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-156 61179621L1-5C Figure 5-115. Performance Menu An example of the ADSL Performance Mo nitoring Status screen is shown in Figure 5-116 . Figure 5-116. Current 15 Minute Performance Screen The Performance Monitoring Status screen fields are as shown in Table 5-108 .[...]

Menu Descriptions 61179621L1-5C 5-157 The Performance Monitoring Status screen hot keys are shown in Table 5-109 . T able 5-108 . P erfor mance Monitoring Status Screen Fields Field Description ES This field displays the Errored Seconds. LOL This field displays the Loss of Link Seconds. LOS This field displays the Loss of Signal. CBC This field dis[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-158 61179621L1-5C System Alar m Log Scr een System Alarm Log Main Menu System Alarm Log The Total Access 1224 system pr ovides a system alarm log for monitoring a larms. To view the System Alarm Log screen (see Figure 5-117 ), select System Alarms fro m the Main [...]

Menu Descriptions 61179621L1-5C 5-159 System Ev ent Log Screen System Event Log Main Menu System Event Log The System Event Log screen (see Figure 5-118 ) provides non-volatile storage of system events. Figure 5-118. System Event Log Screen The System Event Log screen hot keys are shown in Table 5-111 . TID: HSVL00001 Total Acces s 1224 MM /DD/YY[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-160 61179621L1-5C T able 5-1 11. System Ev ent Log Hot Keys Hot Key Description Fu nction A All This hot key is used to display all events. D Date/T ime This hot key is used to display date/time events. F First This hot key is used to display the first page of even[...]

Menu Descriptions 61179621L1-5C 5-161 Contact Infor mation Screen Contact Information Main Menu Contact Information The Contact Information screen (see Figure 5-119 ) disp lays ADTRAN technical support, repair, and online suppor t contact information. Figure 5-119. Contact Information Screen TID: HSVL00001 Total Acces s 1224 MM /DD/YY HH:MM Unack[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-162 61179621L1-5C TL1 Mode Screen TL1 Mod e Main Menu TL1 Mode Figure 5-120 displays the TL1 session screen. TL1 commands can be executed once the session has been activated with a proper login. All commands end with a semicolon. Type 'menus;' to return[...]

Menu Descriptions 61179621L1-5C 5-163 T able 5-112. TL 1 Commands TL1 Commands ACT -PROFILE-ADSL ENT -T1 RT RV -C R S- V C ACT -USER ENT -VCL RT RV -E Q PT AL W-MSG-ADSL GET -SYS-INFO RT RV -H D R AL W-MSG-T1 INH-MSG-ADSL RT RV -I NV-E QPT AL W-MSG-EQPT INH-MSG-T1 RTRV -I PP O RT AL W-MSG-ENV INH-MSG-EQPT RTRV - NE -A L L AL W-MSG-ALL INH-MSG-ENV R[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 5-164 61179621L1-5C This page is intentionally blank.[...]

61179621L1-5C 6-1 Section 6 Maintenance INTRODUCTION The Total Access 1224 does not require ro utine maintenance for normal operation. ADTRAN does not recommend that repairs be at tempted in the field. Repair services can be obtained by retu rning the defective unit to ADTRAN. For more troubl eshooting information, refer to the Total Access 1100/12[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 6-2 61179621L1-5C TL1 When accessing the Total Access 1224 via TL1, the Save and R estore com mands are used to save or retrieve the SCA file. Sav e Use: ED-PROV-TFT P:::::FILENAM E=<filename> ,TFTPIPADDR=<ip _addr>,SET; Re st o r e Use: ED-PROV-TFT P::::[...]

61179621L1-5C 7-1 Section 7 Specifica tions INTRODUCTION Specifications for the Tota l Access 1224 are detailed in Table 7- 1 . T able 7-1. T otal Ac cess 1224 Specifications Specifications Descr iptions ADSL Loop Interface Modulation Type: Mode: Standards: Number of Pairs (ADSL + POTS): Downstream Data Rate: Upstream Data Rate: ADSL Service Range:[...]

Total Access 1224 Quad T1 IMA 24-Port DSLA M Installation and Maintenance Practice 7-2 61179621L1-5C Environment Temperature: Humidity: Operating (Standard) : –40°C to +70°C Storage: –40°C to +85°C 95% non-condensing Part Numbers Total Access 1224 Quad T1 IMA 24-Port DSLAM: Replacement Fan: Replacement Filter : Replacement Filter Pack (Quan[...]

61179621L1-5C A-1 A ppendix A W ar r anty W AR RANTY AND CUSTOMER SER VICE ADTRAN will replace or repair this product wit hin the warranty peri od if it does not meet it s published specifications or fails while in se rvice. Warr anty information can be fo und at www.adtran.com/warranty . Refer to the following subsections for sales, support, Custo[...]

Carrier Networks Divis ion 901 Explorer Blvd. Huntsville, AL 35806 ®[...]