AEG L 75270 FL manual

L 75270 FL L 75470 FL L 75670 FL WASHING MACHINE USER MANUAL[...]

SERVICE When contacting Service, ensure that you have the followin g data available . The information can be found on the rating plate. Model PNC Serial Number The following symbols are used in this user manual: Warning - Importan t Safety information. General information and tips Environmental information Subject to change without no tice CONTENTS[...]

FOR PERFECT RESULTS Thank you for choosing this AEG product. We hav e created it to give you impeccable performance for many years , wi th innovative technologies tha t help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading t o get the very best from it. ACCESSORIES AND CONSUMABLES In the A[...]

SAFETY INFORMATION Before the installatio n and use, read this manual carefully: • For your safety and the safety of your property • To help the environment • For the correct operation of the ap- pliance. Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible if[...]

internal components and cause leak- ages or malfunctions. • Do not install and connect a dam - aged appliance. • Make sure to remove all packaging and transport bolts. • Make sure that the mains plug is dis- connected from the mains socket during installation. • Only a qualified person must do the electrical installation, the plumbing and t[...]

ENVIRONMENT CONCERNS PACKAGING MATERIALS Recycle the materials with the symbol . Put the packaging in applicable con- tainers to recycle it. ECOLOGICAL HINTS To help the environment, use less water and energy, obey these instructions: • Set a programme without the pre- wash phase to wash laundry with nor- mal soil. • Always start a washing prog[...]

TECHNICAL INFORMATION Dimensions Width / Height / Depth 605 / 850 / 605 mm Total depth 640 mm Electrical connection: Voltage Overall power Fuse Frequency 230-240 V 2200 W 10 A 50 Hz Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where th e low volt age eq ui pment has no protection agains[...]

PRODUCT DESCRIPTION 1 2 3 8 9 5 6 7 4 10 11 12 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump 7 Feet for the appliance level 8 Water drain hose 9 Water in let val ve 10 Mains cable 11 Transit bolts 12 Feet for the appliance level ACCESSORIES 1 2 3 4 1 Spanner To remove the tran sit bolts. 2 Plastic caps To[...]

CONTROL PANEL Cottons + Prewash Extra Silent Synthetics + Prewash Easy Iron Delicates W ool/Silk Economy 20 Min. - 3 kg Quick Intensive Jeans Curtains Super Eco Rinse Spin/Drain On/Off Te m p . Spin Start/Pause Delay Start Time Save Stains Extra Rinse 1 2 3 4 5 6 7 8 9 10 1 On/Off button 2 Programme knob 3 Display 4 Start Pause button 5 Delay start[...]

C • The display symbols. 2) Symbols Description Washing phase Rinse phases Spin phase Child lock You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off. If the programme is completed but the s ymbol stays on: • There is water in the drum. • The 'Rinse Hold' function is on. Delay[...]

EXTRA RINSE BUTTON 7 Press button 7 to add rinsing phases to a programme. Use this function for persons allergic to detergents and in areas where the wa- ter is soft. STAIN BUTTON 8 Press button 8 to add the stain phase to a programme. Use this function for laundry with hard stains to remove. When you set this function, put the stain remover into c[...]

PROGRAMMES Programme Temperature Type of load max. weight of load Cycle description Functions Cottons 95° - Cold White and coloured cotton with normal soil. max. 7 kg Wash Rinses Long spin SPIN REDUCTION RINSE HOLD STAIN EXTRA RINSE TIME SAVE 1) Cottons + pre- wash 95° - Cold White and coloured cotton with heavy soil. max. 7 kg Prewash Wash Rinse[...]

Programme Temperature Type of load max. weight of load Cycle description Functions Spin / Drain 3) All fabrics The maximum load of the laundry is rela- ted to the t ype of laundry. Drainage of the water Spin phase at the maximum speed. SPIN REDUCTION NO SPIN Rinse Hand was hed items. Rinses Long spin SPIN REDUCTION RINSE HOLD EXTRA RINSE Curtains 4[...]

3) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with the laundry. 4) Set this function to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin. 5) Set this programme to decrease the time and the consumption of energy and water. 6) Set this programme[...]

BEFORE FIRST USE 1. To activate the drain system, put 2 litre of water in the main wash com- partment of the detergent dispens- er. 2. Put a small quantity of detergent in the main wash com partment of the detergent dispenser. Set and start a programme for cott on at the highest temperature without laun- dry. This removes all possible dirt from the[...]

FILLING THE DETERGENT AND ADDIT IVES The detergent compartment for the prewas h phase and the soak programme. Add the detergent for prewash and soak before the start of the programme. The detergent compartment for the washing phase. If you use a liquid detergent, pu t it immediately before you start the programme. Liquid additives compartment (fabr[...]

3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed in the flap. – Do not set the prewash phase. – Do not set the delay start function. 5. Measure out th[...]

CHANGE A FUNCTION You can change only some functions before they operate. 1. Press button 4 . The indicator flashes. 2. Change the function set. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours. The related symbols comes on. 2. Press button 4 , the appliance starts the coun tdown of the de[...]

To drain the water: 1. If necessary, decrease the spin speed. 2. Press th e Start/ Pause bu tton 4 . The appliance drain the water and spin. 3. When the programme is comple- ted and the door lock symbol goes off, you can open the door 4. Deactivate the appliance. The appliance drain and spin automatically after approximate- ly 18 hours. ENGLISH 19[...]

HELPFUL HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, col- oured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. • Some coloured items can discolour with the first wash. We re commend that you w ash them separa tely for[...]

Water hardne ss table Level Type Water hardness °dH °T.H. mmol/l Clarke 1 soft 0-7 0-15 0-1.5 0-9 2 mediu m 8-14 16-25 1.6-2. 5 10-16 3 hard 15-21 26-37 2.6- 3.7 17-25 4 very hard > 21 > 37 >3.7 >25 ENGLISH 21[...]

CARE AND CLEANING WARNING! Disconnect the appliance from the mains supply before you clean it. DESCALING The water we use contains limescale. If it becomes necessary, use a water soft- ener to remove limescales. Use a special product made for wash- ing machines. Obey the instructions that you find on the packaging of the manufacturer. Do this separ[...]

DETERGENT DISPENSER To clean the d ispenser : 1 2 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquid additive compartment. 4. Clean all the pa rts with wat er. 5. Clean the dispenser recess with a brush. 6. Put back the dispenser in the re- cess. DRAIN PUMP Regularly examine the drain pump and make su re tha t it is[...]

To clean t he drain pump : 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess of the drain pump to co llect the water that flows out. 4. Press the two levers and pull for- ward the drainage duct to let the water flow out . 1 2 5. When the container is full of water, put the drainage duct back again a[...]

1 2 9. Clean the filter under the water tap and put i t back in t he pump into the sp ecia l guid es. 10. Make sure that you tighten correct- ly the filter to prevent leakages. 11. Put the flap back and close the drain pump door. THE INLET HOSE FILTER AND THE VALVE FILTER It could be necessary to clean the filters when: • The appliance does not f[...]

When you drain the water with the emergency drain procedure, you m ust activate again the drain system: 1. Put 2 litres of water in the main wash compartment of the deter- gent dispenser. 2. Start the programme to drain the water. FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0 °C, remove the rem[...]

TROUBLESHOOTING The start of the appliance does n ot oc- cur or it stops d uring operation. First try to find a solution to the prob- lem (refer to the table). If not, contact the service centre. With some prob lems, the acou stic signals operate and the display shows an alarm code: • - The appliance does not fill with water. • - The appliance [...]

Problem Possible cause Possible solution The anti-flood de- vice is on. • Disconnect the appliance. • Close the water tap. • Contact the serv ice centre. The spin phase does not operate. The spin phase is off. Set the spin programme. The filter of the drain pump is blocked. Clean the filter of the drain pump. Refer to 'Care and clean- in[...]

Problem Possible cause Possible solution The appliance fills with water and drain immediately. The end of the drain hose is too low. Make sure that the drain hose is in the correct position. The washing re- sults are not satis- facto ry. The detergent you used was not sufficient or cor- rect. Increase the detergent quantity or use a different one. [...]

INSTALLATION UNPACKING 1. Use the gloves. Remove the exter- nal film. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packaging materials. 4. Remove the internal film. 5. Open the door. Remove the poly- styrene piece from the door seal and all the items from the drum. 30[...]

6. Put the front piece on the floor be- hind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to dam- age the hoses. 1 2 7. Remove the polystyrene protection from the bottom. 8. Pull up the appliance in vertical po- sition. 9. Remove the power supply cable and the drain hose from the hose holders. 10. Remove t[...]

12. Replace the pla stic spacers w ith the plastic caps. You can find these caps in the user manual bag. WARNING! Remove all the packaging and the transit bolts before you in- stall the appliance. We recommend that you keep the packaging and the transit bolts for when you move the ap- pliance. POSITIONING AND LEVELLING x4 • Install the appliance [...]

Installation on a not hard floor When you install the appliance on a not hard floor (wooden planks floor), put a rigid support plinth under the appli- ance feet to prevent the noise and the vibration. Assemble the pli nth with a waterp roof wood panel (min. 15 mm thick) and at- tach it to the beams of the floor with minimum 2 scre ws. The plinth mu[...]

Water-stop device A The inlet hose has a wa ter stop device. This device prevents water leaks in the hose because of its natural ageing. The red sector in the window «A» shows this fault . If this occur, close the water tap and contact the service centre to replace the hose. WATER DRAINAGE There are different procedures to con- nect the drain hos[...]

• If the end of th e drain hose is this (see the drawing), you can push it di- rectly into the stand pipe. Without the plastic h ose guide. •T o a s i n k s p i g o t . Refer to the illustration. Put the drain hose in the spigot and tighten it with a clip. Make sure that the drain hose makes a loop to prevent that remain- ing particles go in th[...]

www.aeg.com/shop 132939750-A-112011[...]