AEG S 75328 DT2 manual

SANTO 75328-2 DT User manual Fridge-Freezer[...]

Thank you for choosing on e of our high-quality prod ucts. To ensure optimal and regula r performanc e of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficientl y. To refer to this manual any time you need to, we recomme nd y o u t o k e e p i t i n a s a f e p l a c [...]

structions and make sure that they remain with the appliance if it is moved or s old, so that everyone using it through its life will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user's inst ructions as the manufacturer is not responsible for damages caused by omission. Chi[...]

• It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-cir cuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, co mpressor) must be replaced by a certified service agent or qualified service personnel. 1. Power cor d must not be lengthe ned. 2. M[...]

• Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages im mediately to the place you bought it. In that case retain packing. • It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. • Adequate air [...]

Temperat ure regulat ion The temperature is automatically regulated. To operate the appliance, proc eed as follows: • press the temperature regulator more time s until the LED correspon ding to the required temperature lights up. Selection is prog ressive, varying fr om +2°C to +8°C . A medium setting is generally the most suitable. However, th[...]

Daily use Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can b e posi - tioned as desired. Bottle rack Place the bottles (with th e opening facing front) in the pre-positioned shelf. If the shelf is positioned horizontally, place only closed bottles. This bottle holder shelf can be tilted in [...]

You can switch on the fa n by pressing the switch shown in the picture. The green light comes on. Switch on the fan when the ambient temperature exceeds 25°C. Freezing Calendar The symbols sh ow different type s of frozen goods. The numbers indicate storage times in months for the appropriate types of fro zen goods. Whether the upper or lower valu[...]

Helpful hints and tips Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • If the ambient temperature is high and the Temper ature Regulator is set to low tem - perature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator. If th[...]

Hints for storage of frozen food To obtain the best performance fr om this appliance, you should: • make sure that the commercially frozen food stuffs were adequately stored by the re - tailer; • be sure that frozen foodstu ffs are transferred from the f oodstore to the freezer in the shortest possible time; • not open the door frequently or [...]

• pull out of the slot the exhausted air filter. • 2 1 insert the new air filter in the slot (2) •c l o s e t h e f l a p . The air filter is a consumable accessory an d as such is not cove red by the guarantee. During the operation, always keep the air v entilation flap closed. The air filter should be handled carefully to prevent its surfac[...]

It is important to periodically clean the defrost water drain hole in the mi ddle of the refrigerator compartment channel to prevent the water ove r - flowing and dripping onto the food inside. Use the special cleaner provided, which you will find al - ready inserted into the drain hole. Defrosting of the freezer The freezer compartment of this mod[...]

Problem Possible cause Solution The mains plug is not connect ed to the mains socket corr ectly. Connect the mains plug to the mains socket correctly. The appliance has no power. There is no volt age in the m ains socket. Connect a different electrical ap - pliance to the mains socket. Contact a q ualified elec trician. The lamp does not work. The [...]

Problem Possible cause Solution There is too much frost. Food is not wrapped correc tly. Wrap the food correctl y. The door is not closed correctl y. Refer to "Closing the door". The temperature regulator is not set correctly. Set a highe r temperat ure. Replacing the lamp CAUTION! Disconnect the plug from the mains s ocket. 1. Press on t[...]

Positioning Install this appliance at a location where the ambien t temperature corresponds to the climate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Location The appliance should be ins talled well away from sour ces of he[...]

This appliance complies with the E.E.C. Directive s. Rear spacers Inside the appliance you find two spacers which must be fitted as shown in the figure. Slacken the screws and inse rt the spacer under the screw head, then reti ghten the screws. Installation of the Taste Guard Filter The Taste Guard Filter is an active carbon filter which absorbs ba[...]

1. Screw the top handle bracket to the han - dle rod. 2. Fit the bottom handle bracket on the low - er right-hand side o f the door. 3. Fit the top handle bracket on the top right-hand side of the door. 4. Screw the handle rod to the bottom han - dle bracket. Do not use excessive force and overtighten the screws (max. 2 Nm) as you may damage the do[...]

1. Slide the bottom door off the middle hinge (H). Remove the middle hinge by unscrewing the fixing screws. Make sure to remove the plastic spacer inserted under the hinge. 2. Slide the top door o ff the pin (G). Un - screw the pin (G) and install it on the opposite side. 3. Remove the two plugs from the middle crossbeam and install them on the op [...]

5. Remove with a tool the cover (e), un - screw the lower hinge pivot (f) using a 10 mm spanner and re-screw it on the opposite side. 6. Install the cover (e) on the oppo site side. 7. Remove the handle. Unscrew the top handle bracket from the handle rod (h1). Unscrew the bottom handle bracke t from the door (h2). Unscrew the top handle bracket fro[...]

for the recycling of electrical and electronic eq uipment. By ensuring th is product is disposed of correctly, you will help prevent potentia l negative consequences for the environment and human health, which could other wise be caused by inappropriate waste handling of this product. For more detailed information abou t recycling of this product, [...]

21[...]

22[...]

23[...]

www.electrolux.com 212710232-00-160 72009[...]