Go to page of
Similar user manuals
-
Switch
Allied Telesis AT-SB4008
9 pages 0.14 mb -
Switch
Allied Telesis AT-S63
582 pages 2.79 mb -
Switch
Allied Telesis AT-8000C
1 pages 0.03 mb -
Switch
Allied Telesis XEM-2XP
31 pages 1.49 mb -
Switch
Allied Telesis AT-GS950
2 pages 0.06 mb -
Switch
Allied Telesis AT FS705LE AT-FS705LE AT-FS705LE
51 pages 0.5 mb -
Switch
Allied Telesis X600-48TS/XP
112 pages 9.17 mb -
Switch
Allied Telesis AT-GS950/48
60 pages 1.92 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Allied Telesis AT-IFS802SPOE, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Allied Telesis AT-IFS802SPOE one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Allied Telesis AT-IFS802SPOE. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Allied Telesis AT-IFS802SPOE should contain:
- informations concerning technical data of Allied Telesis AT-IFS802SPOE
- name of the manufacturer and a year of construction of the Allied Telesis AT-IFS802SPOE item
- rules of operation, control and maintenance of the Allied Telesis AT-IFS802SPOE item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Allied Telesis AT-IFS802SPOE alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Allied Telesis AT-IFS802SPOE, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Allied Telesis service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Allied Telesis AT-IFS802SPOE.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Allied Telesis AT-IFS802SPOE item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
613-001691 Rev.A AT-IFS802SP/POE 8x10/100TX POE Layer 2 Ma naged Industrial Switch AT-IFS802SP/POE Installation and User’s Guide[...]
-
Page 2
Copyright © 2012 Allied Telesis, Inc. All rights reserved. No part of this pub lication may be reproduced without prior wr itten permission from Al lied Telesis, Inc. Allied Telesis and th e Allied Telesis logo are trademarks of Allied Telesis, Incor porated . All other product names, company nam es, logos or other designations me ntioned herein a[...]
-
Page 3
3 Electrical Safety and Emissions S tandards This product meets the following standards. RFI Emissions FCC Class A, CE EN61000-4-2, CE EN61000-4-3, CE EN-61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE EN61000-4-8, CE EN61000-4-1 1, CE EN61000-4-12, CE EN61000-6-2, CE EN61000-6-4 Electrical Safety UL, cUL, CE/EN60950-1 S t ability T esting IEC60068-2[...]
-
Page 4
4[...]
-
Page 5
5 Pr eface This manual is the installation and manage ment guide for the AT-IFS802SP/POE 8x10/100TX POE Lay er 2 Managed Industrial Switch. The instructions in this guide exp lain how to install the switch, start a management session, and use the CLI and web management inte rfaces. Allied Telesis Contact Information If you need assistance with this[...]
-
Page 6
Preface 6[...]
-
Page 7
3 A T -IFS802SP/POE(W)-80 User Manual Content Chapter 1 Intr oduction ......................................................................... 6 1.1 Hardwar e Featur es ....................................................................................................................6 1.2 Software F eatures .......................................[...]
-
Page 8
4 A T -IFS802SP/POE(W)-80 User Manual 6.9 Fault Rela y Alarm ........................................................................................................................ 36 6.10SNTPConguration ................................................................................................................ 36 6.11 IP Security [...]
-
Page 9
5 A T -IFS802SP/POE(W)-80 User Manual System Commands Set......................................................................................................................79 P or t Commands Set .......................................................................................................................... 81 T runk Commands Set ......[...]
-
Page 10
6 A T -IFS802SP/POE(W)-80 User Manual Chapt er 1 Introduction The 8 10/100TX + 2 10/100/1000T/Mini-GBIC Combo with 8 PoE Injectors Managed Industrial Switch is a cost-effectiv e solution and meets the high reliability r equirements demanded by industrial applications. Using ber port can extend the connection distance that[...]
-
Page 11
7 A T -IFS802SP/POE(W)-80 User Manual Network Cable 10Base-T : 2-pair UTP/STP Cat. 3, 4, 5/ 5E cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable EIA/TIA-568 100-ohm (100m) 1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable EIA/TIA-568 100-ohm (100m) Optical Fiber Distance: Multi mode: 0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km)[...]
-
Page 12
8 A T -IFS802SP/POE(W)-80 User Manual 1.2 Softwar e F eatures Management SNMP v1 v2c, v3/ W eb/T elnet/CLI SNMP MIB RFC 1215 T rap, RFC1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1643 , RFC 1757, RSTP MIB, Private MIB, LLDP MIB VLAN P or t Based VLAN IEEE 802.1Q T ag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can [...]
-
Page 13
9 A T -IFS802SP/POE(W)-80 User Manual Login Security Supports IEEE802.1X Authentication/RADIUS Bandwidth Contr ol Supportingresspack etlterandegresspack etlimit The egress rate contr ol supports all of packet type and the limit rates ar e 100K~102400Kbps(10/100), 100K~256000Kbps(1000) Ingresslterpack ettypecom[...]
-
Page 14
10 A T -IFS802SP/POE(W)-80 User Manual Chapt er 2 Hardwar e Description In this paragra ph, it will describe the Industrial switch’ s hardwar e spec, por t, cabling inf ormation, and wiring installation. 2.1 Ph ysical Dimension 8 10/100TX w/ X-Ring Managed Industrial Switch dimension (W x D x H) is 72mm x 105mm x 152mm 2.2 F ront P anel The Fr on[...]
-
Page 15
11 A T -IFS802SP/POE(W)-80 User Manual 2.3 Bottom Vie w The bottom panel of the 8 10/100TX w/ X-Ring Managed Industrial Switch has one terminal block connector of tw o DC pow er inputs and one fault alarm. Bottom Panel of the industrial switch[...]
-
Page 16
12 A T -IFS802SP/POE(W)-80 User Manual 2.4 LED Indicators The diagnostic LEDs that pro vide real-time information of system and optional status are located on the fr ont panel of the industrial switch. The f ollowing table provides the description of the LED status and their meanings for the s witch. LED Color Status Meaning PWR Gr een On The switc[...]
-
Page 17
13 A T -IFS802SP/POE(W)-80 User Manual Chapt er 3 Hardwar e Installation In this paragraph, w e will describe how to install the 8 10/100TX w/ X-Ring Managed Industrial Switch and the installation points attended to it. 3.1 Installation Steps Unpack the Industrial switch 1. Check if the DIN-Rail is scre wed on the Industrial switch or not. If the 2[...]
-
Page 18
14 A T -IFS802SP/POE(W)-80 User Manual 3.2 DIN-Rail Mounting The DIN-Rail is scr ewed on the industrial switch when out of factor y . If the DIN-Rail is not scr ewed on the industrial switch, please see the following pictures to scr ew the DIN-Rail on the switch. F ollow the steps below to hang the industrial s witch. 1. First, inser t the top of D[...]
-
Page 19
15 A T -IFS802SP/POE(W)-80 User Manual 3.3 W all Mount Plate Mounting Follo w the steps below to mount the industrial switch with wall mount plate. Remov e the DIN-Rail from the industrial s witch; loose the scre ws to remov e the DIN-Rail. 1. Place the wall mount plate on the r ear panel of the industrial switch. 2. Use the scr ews to scr ew the w[...]
-
Page 20
16 A T -IFS802SP/POE(W)-80 User Manual 3.4 Wiring the P o w er Inputs Please follow the steps belo w to inser t the pow er wire. Insert A C or DC pow er wires into the contacts 1 and 2 for po wer 1, or 5 and 6 for pow er . 1. Tighten the wire-clamp scr ews f or prev enting the wires fr om loosing. 2. [note] The wire gauge f or the terminal block sh[...]
-
Page 21
17 A T -IFS802SP/POE(W)-80 User Manual 3.5 Wiring the F ault Alarm Contact The fault alarm contacts ar e in the middle of the terminal block connector as the picture shows below . Inserting the wires, the switch will detect the fault status of the pow er failure, or port link failure (a vailable for managed model) and then forms an open circuit. Th[...]
-
Page 22
18 A T -IFS802SP/POE(W)-80 User Manual 3.6 Cabling Use four twisted-pair , Categor y 5e or above cabling for RJ-45 por t connection. The cable between • the switch and the link par tner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long. Fiber segment using • single-mode connector type must use 9/[...]
-
Page 23
19 A T -IFS802SP/POE(W)-80 User Manual T o remo ve the LC connector fr om the transceiver , please follo w the steps shown below: First, press the upper side of the LC connector to r elease from the transceiv er and pull it out. Second, push down the metal loop and pull the transceiver out b y the plastic handle . Second, inser ttheber?[...]
-
Page 24
20 A T -IFS802SP/POE(W)-80 User Manual Chapt er 4 Netw ork Application This chapter pr ovides some sample applications to help user to ha ve more actual idea of industrial switch function application. A sample application of the industrial s witch is shown as below: 4.1 X-Ring Application The industrial switch suppor ts the X-Ring protocol that can[...]
-
Page 25
21 A T -IFS802SP/POE(W)-80 User Manual 4.2 Coupling Ring Application In the network, it ma y ha ve more than one X-Ring group . By using the coupling ring function, it can connect each X-Ring for the redundant backup . It can ensure the transmissions betw een two ring gr oupsnottofail. Thefollo winggureisasampleof?[...]
-
Page 26
22 A T -IFS802SP/POE(W)-80 User Manual 4.3 Dual Homing Application Dual Homing function is to pre vent the connection lose from between X-Ring gr oup and upper lev el/ core switch. Assign two por ts to be the Dual Homing por t that is backup por t in the X-Ring gr oup. The Dual Homing function onl y w orks when the X-Ring function is activ e . Each[...]
-
Page 27
23 A T -IFS802SP/POE(W)-80 User Manual Chapt er 5 Console Manag ement 5.1 Connecting to the Console P or t The supplied cable which one end is RS-232 connector and the other end is RJ-45 connector . Attach the end of RS-232 connector to PC or terminal and the other end of RJ-45 connector to the console port of the switch. The connected terminal or [...]
-
Page 28
24 A T -IFS802SP/POE(W)-80 User Manual 5.3 Lo gin in the Console Interface When the connection between Switch and PC is ready , turn on the PC and run a terminal emulation pr ogram or Hyper T erminal and congure its comm unication parameters to match the following default characteristics of the console port[...]
-
Page 29
25 A T -IFS802SP/POE(W)-80 User Manual 5.5 Commands Le v el Modes Access Method Pr ompt Exit Method About This Mode1 User EXEC Begin a session with your s witch. switch> Enter logout or quit. The user commands a vailable at the user lev el are a subset of those a vailable at the privileged lev el. Use this mode to •P erformbasictests.[...]
-
Page 30
26 A T -IFS802SP/POE(W)-80 User Manual 1. Launch the Internet Explorer on the PC 2. K ey in “http:// “+” the IP addr ess of the switch”, and then Pr ess “Enter”. Chapt er 6 W eb-Based Mana gement Thissectionintr oducesthecongurationandfunctionsofthe W eb-Basedmanagement. 6.1 About W eb-based Mana gement [...]
-
Page 31
27 A T -IFS802SP/POE(W)-80 User Manual 3. The login screen will appear right after 4. K eyintheusernameandpassw ord. Thedefaultusernameandpasswor darethesameas ‘r oot’. 5. Pr ess Enter or click the OK button, and then the home scr een of the W eb-based management appears. Login screen 6.[...]
-
Page 32
28 A T -IFS802SP/POE(W)-80 User Manual 6.5IPConguration The switchis a networkdevicewhich needs to be assigned an IP addressfor being identied on the network. Users ha ve to decide a means of assigning IP ad dress to the switch. DHCP Client • : Enable or disable the DHCP c[...]
-
Page 33
29 A T -IFS802SP/POE(W)-80 User Manual 6.6 DHCP Ser ver DHCP is the abbre viation of Dynamic Host Conguration Protocol that is a protocol for assigning dynamic IP addr esses to devices on a network. With dynamic addr essing, a de vice can ha ve a diff erent IP address every time it connects to the net[...]
-
Page 34
30 A T -IFS802SP/POE(W)-80 User Manual 6.6.2 Client Entries When the DHCP ser ver function is enabled, the system will collect the DHCP client information including the assigned IP address, the MA C address of the client device , the IP assigning type , status and lease time. DHCP Client Entries interface 6.6.3 P ort and IP Bindings Assignthe[...]
-
Page 35
31 A T -IFS802SP/POE(W)-80 User Manual 6.7 TFTP It pro vides the functions allowing the user to update the switch rmware via the T rivial File T ransfer Pr otocol(TFTP)ser ver . Befor eupdating, mak esurethe TFTP ser verisr eadyandthermwareimage?[...]
-
Page 36
32 A T -IFS802SP/POE(W)-80 User Manual BackupCongurationinterface Y ou can back up the current conguration fr om ash R OM to the TFTP ser ver for the purpose of reco vering the conguration later . It helps you to av oid wasting time on con?[...]
-
Page 37
33 A T -IFS802SP/POE(W)-80 User Manual SyslogCongurationinterface SimpleMail T ransferPr otocol(SMTP)isthestandardf oremailtransmissionsacr ossthenetwork. Y ou cancongur etheSMTP ser verIP , mailsubject, sender , mail account, pass word, and therecip[...]
-
Page 38
34 A T -IFS802SP/POE(W)-80 User Manual SMTPCongurationinterface Ha ving ticked the Syslo g/SMTP checkbox es, the ev ent log/email aler t will be sent to the system log ser ver and the SMTP ser ver respectivel y . Also , P or t event log/aler t (link up, link down, and both) can be sent to the system log ser ver/SMTP server r espectively b [...]
-
Page 39
35 A T -IFS802SP/POE(W)-80 User Manual P or t e vent selection • : Also , before the dr op-down menu items are a vailable , the Syslog Client Mode selection item on the Syslog Conguration tab and the E-mail Aler t selection item on the SMTPCongurationtabmustbeenabledrs[...]
-
Page 40
36 A T -IFS802SP/POE(W)-80 User Manual 6.9 F ault Rela y Alarm The Fault Rela y Alarm function provides the P ower Failure and P or t Link Down/Br oken detection. With both power input 1 and po wer input 2 installed and the check box es of pow er 1/po wer 2 ticked, the F AUL T LED indicator will then be possible to light up when any one of the pow [...]
-
Page 41
37 A T -IFS802SP/POE(W)-80 User Manual SNTP Client • : Enable/disable SNTP function to get the time fr om the SNTP ser ver . Da ylight Saving Time • : This is used as a control switch to enable/disable da ylight sa ving period and da ylight sa ving offset. Users can congure Da ylight Sa ving Period and[...]
-
Page 42
38 A T -IFS802SP/POE(W)-80 User Manual SNTP Sev er URL • : Set theSNTP ser ver IPad dress. Y ou can assigna localnetw ork timeserver IP addr ess or an internet time ser ver IP addr ess. Switch Timer • : When the switch has successfully connected to the SNTP ser ver whose IP addr ess was [...]
-
Page 43
39 A T -IFS802SP/POE(W)-80 User Manual 6.11 IP Security IPsecurityfunctionallo wstheusertoassign10specicIPad dressesthatha vepermissionto manage the switch thr ough the http and telnet ser vices for the securing switch management. The purpose of giving the limited IP addr esses permission is to [...]
-
Page 44
40 A T -IFS802SP/POE(W)-80 User Manual 6.12 User Authentication Change web management login user name and pass wor d for the management security issue . User name • : T ypeinthenewusername(Thedefaultis ‘root’) P asswor d • : T ypeinthenewpassw ord(Thedefaultis ‘r oot’) Con[...]
-
Page 45
41 A T -IFS802SP/POE(W)-80 User Manual P or t Statistics interface 6.14 P or t Control In Portcontr ol you cancongur ethe settingsof each por tto contr olthe connectionparameters, and the status of each port is listed beneath. P or t • : Usethescrollbarandclickonthe[...]
-
Page 46
42 A T -IFS802SP/POE(W)-80 User Manual P or t Control interface 6.15 P or t T runk P or t trunking is the combination of sev eral ports or network cables to expand the connection speed bey ond the limits of any one single port or network cable . Link Aggregation Control Protocol (LA CP), which is a protocol running on la yer 2, provides a standardi[...]
-
Page 47
43 A T -IFS802SP/POE(W)-80 User Manual W ork por ts • : This column eld allows the user to type in the total number of active por t up to f our . With LA CP static trunk group , e.g. you assign four ports to be the members of atrunk groupwhoseworkpor ts columneld[...]
-
Page 48
44 A T -IFS802SP/POE(W)-80 User Manual LA CP disabled • Ha ving set up the aggr egator setting with LA CP disabled, you will see the local static trunk gr oup information on the tab of Aggregator Inf ormation . 6.15.2 Aggr egator Information Assigning 2 ports to a trunk group with LA CP disabled Static T runking Group information Gr oup K ey ?[...]
-
Page 49
45 A T -IFS802SP/POE(W)-80 User Manual Assigning 2 ports to a trunk group with LA CP disabled Static T runking Group information LA CP enabled • Ha ving set up the aggr egator setting with LA CP enabled, you will see the trunking group information betw een two switches on the tab of Aggr egator Information . Switch1conguration Set 1. [...]
-
Page 50
46 A T -IFS802SP/POE(W)-80 User Manual Switch2conguration Switch2congurationinterface 1. Set System Priority of the trunk group . The default is 1. 2. Select a trunk group ID by pull do wn the drop-down men u bar . 3. Enable LA CP . 4. Include the member por ts by clicking the Add button after selecting the port number and the [...]
-
Page 51
47 A T -IFS802SP/POE(W)-80 User Manual Ha ving set up the LA CP aggregator on the tab of Aggr egator Setting, you can congure the state activityforthemembersof theLA CPtrunk gr oup. Y oucantickorcancel thecheckboxbeside the state label. When y[...]
-
Page 52
48 A T -IFS802SP/POE(W)-80 User Manual 6.16 P or t Mirr oring TheP or tmir roring isamethod formonitortrafc inswitched networks. T rafcthr oughpor tscan be monitoredbyone specic por t, which means trafc goesin or outmonitored(source)por ts [...]
-
Page 53
49 A T -IFS802SP/POE(W)-80 User Manual 6.17 Rate Limiting Y oucansetupev er yport’ sbandwidthrateandframelimitationtype. Ingress Limit F rame type • : select the frametype thatwants tolter . Ther ear e four frametypes for selecting: All Br oadcast/Multicast/Floode[...]
-
Page 54
50 A T -IFS802SP/POE(W)-80 User Manual 6.18 VLANconguration A Virtual LAN (VLAN) is a logical network gr ouping that limits the br oadcast domain, which would allow y ou to isolate network trafc, so only the members of the sameVLAN will r eceive trafc fr om the ones of the same V[...]
-
Page 55
51 A T -IFS802SP/POE(W)-80 User Manual Pull do wn the selection item and f ocus on • P or t Based then press to set the VLAN Operation Mode in P or t Based mode . Click to add a ne w VLAN group (The maximum VLAN gr oups are up to 64). • VLAN – P or t Based interface A d d A p p l y Enter the gr oup name and VLAN ID . ?[...]
-
Page 56
52 A T -IFS802SP/POE(W)-80 User Manual VLAN—P or t Based Edit/Delete interface Use to delete the VLAN. • Use to modify group name , VLAN ID , or add/r emove the members of the existing • VLAN gr oup. D e l e t e E d i t [note] Remembertoex ecutethe “Sa veConguration”action, otherwisethenew congura[...]
-
Page 57
53 A T -IFS802SP/POE(W)-80 User Manual Pull down the selection item and f ocus on • 802.1Q then pr ess to set the VLAN Operation Mode in 802.1Q mode. Enable GVRP Protocol • : GVRP (GARP VLAN Registration Pr otocol) is a protocol that facilitates control of virtual local ar ea netw orks (VLANs) within a larger network. GVRP conformsto?[...]
-
Page 58
54 A T -IFS802SP/POE(W)-80 User Manual Hybrid Link : A segment which consists of Access and T runk links. The h ybrid por t has both the features of access and trunk por ts. A h ybrid por t has a PVID belonging to a particularVLAN, and it also forwards the specied tagged-frames f or the purpose of VLAN com[...]
-
Page 59
55 A T -IFS802SP/POE(W)-80 User Manual Gr oupCongurationinterface > Click . A p p l y 6.19 Rapid Spanning T r ee The Rapid Spanning T ree Pr otocol (RSTP) is an ev olution of the Spanning T ree Pr otocol and provides for faster spanning tree conv ergence after a topolog y change . The system also suppor ts STP and the system will auto-d[...]
-
Page 60
56 A T -IFS802SP/POE(W)-80 User Manual [note] Follo wtheruleasbelowtoconguretheMAX Age , Hello Time , andF orward Dela y Time. 2 x (Forwar d Dela y Time value –1) > = Max Age value >= 2 x (Hello Time value +1) RSTPSystemCongurationinterface This web page pr ovides the p[...]
-
Page 61
57 A T -IFS802SP/POE(W)-80 User Manual RSTPP or tCongurationinterface 6.20SNMPConguration Simple Netw ork Management Pr otocol (SNMP) is the protocol de veloped to manage nodes (ser vers, workstations, r outers, switches and hubs etc .) on an IP network. SNMP enables network administrators to manage network performa[...]
-
Page 62
58 A T -IFS802SP/POE(W)-80 User Manual Agent Mode • : Select the SNMP v ersion that y ou want to use it. And then click to switch to the selected SNMP v ersion mode . C h a n g e SNMPSystemCongurationinterface A trap manager is a management station that receiv es the trap messages generated by the switch. Ifnotrapmanage[...]
-
Page 63
59 A T -IFS802SP/POE(W)-80 User Manual Congur etheSNMP V3function. Context T able Congur eSNMP v3context table . Assignthe contextname ofcontext table . Click toad d context name. Click to remo ve unwanted context name. User T able Congur eSNMPv[...]
-
Page 64
60 A T -IFS802SP/POE(W)-80 User Manual Access T able Congur eSNMPv3accesstable. ContextPr ex • : set up the context name . Gr oup Name • : set up the gr oup . Security Le vel • : select the access level. Context Match Rule • : select the context match rule . Read View Name • : set up the read view . Wri[...]
-
Page 65
61 A T -IFS802SP/POE(W)-80 User Manual Use a strict priority scheme : Alwa ysthehigherqueue willbeprocessedrst, exceptthe higher queue is empty . Priority T ype : Ther e ar e 5 priority type selections a vailable— P ort-based, T OS onl y , COS only , T OSrst , and COSrst . Disable means no prio[...]
-
Page 66
62 A T -IFS802SP/POE(W)-80 User Manual Set up the COS priority level. With the drop-do wn selection item of Priority T ype above being selected as COS only/COS rst, this contr ol itemwill then be a vailable to set the queuing policy for each port. COS priority • : Set up the COS priority l[...]
-
Page 67
63 A T -IFS802SP/POE(W)-80 User Manual The switch suppor t IP multicast, you can enable IGMP protocol on web management’ s switch setting advanced page , then the IGMP snooping information displa ys. IP multicast addresses range are fr om 224.0.0.0 thr ough 239.255.255.255. IGMP Pr otocol • : enable or disable the IGMP protocol. IGMP Quer y [...]
-
Page 68
64 A T -IFS802SP/POE(W)-80 User Manual Enable Ring • : T o enable the X-Ring function, tick the checkbox beside the Enable Ring string label. If this checkbox is not tick ed, all the ring functions are una vailable . Enable Ring Master : Tick the checkbox to enable this s witch to be the ring master . 1st & 2nd Ring P or ts : Pull down the[...]
-
Page 69
65 A T -IFS802SP/POE(W)-80 User Manual 6.24LLDPConguration Link La yer Discovery Protocol (LLDP) is dened in the IEEE 802.1AB, it is an emerging standard which pr ovides a solution forthe conguration issues caused by expanding LANs. LLDP speci?[...]
-
Page 70
66 A T -IFS802SP/POE(W)-80 User Manual 802.1xSystemCongurationinterface Y ou can congur e the 802.1x authentication state for each port. The state pr ovides Disable, Accept, Reject, and Authorize. Reject • : Thespeciedpor tisrequir edtobeheldintheun[...]
-
Page 71
67 A T -IFS802SP/POE(W)-80 User Manual Quiet P eriod: • Set the period which the port doesn’ t tr y to acquire a supplicant. TX P eriod • : Set the period por t waits for retransmit next EAPOL PDU during an authentication session. Supplicant Timeout • : Set the period of time the switch waits f or a supplicant r esponse to an EAP r[...]
-
Page 72
68 A T -IFS802SP/POE(W)-80 User Manual Add the Static MA C Addr ess Y oucanaddstaticMA Caddr essintheswitchMA Ctablehere. MA C Addr ess • : Enter the MA C address of the por t that should permanently forward trafc, regar dless of the device netw ork activity . P or t [...]
-
Page 73
69 A T -IFS802SP/POE(W)-80 User Manual MA C Address • : EntertheMA Caddressthaty ouwanttolter . Click . • Ify ouwant todeletethe MA Caddr essfr omthe lteringtable, select theMA Caddr essand • click . A d d D e l e t e Y oucanviewallofth[...]
-
Page 74
70 A T -IFS802SP/POE(W)-80 User Manual Multicast Filtering interface[...]
-
Page 75
71 A T -IFS802SP/POE(W)-80 User Manual 6.27 P o wer o ver Ethernet This segment shows the P ow er over Ethernet function. P oE Status Actual P o wer Consumption • : This column shows the real-time total po wer consumption. Main Supply V oltage • : This column shows the output v oltage of the system for P oE por ts. Firmware V ersion •?[...]
-
Page 76
72 A T -IFS802SP/POE(W)-80 User Manual P o wer Limit F rom • : Check it to decide the pow er limit method. Classication : When this chec k box is tick ed, the system will limit the po wer supply to the powered device in accor dance with the related class . Legacy • : Check it to suppor t the legacy power de vices. Priority • : Pul[...]
-
Page 77
73 A T -IFS802SP/POE(W)-80 User Manual 6.28 F actor y Default Resetswitchtodefaultconguration. Clicktoresetallcongurationstothedefaultvalue. D e f a u l t Factor y Default interface 6.29Sa veConguration Sa veallcongurations thatyou?[...]
-
Page 78
74 A T -IFS802SP/POE(W)-80 User Manual T r oubles shootin g V erify that is using the right pow er cord/adapter (DC 24-48V), please don’ t use the pow er adapter • with DC output higher than 48V , or it ma y damage this device. Select the proper UTP/STP cable to construct the user network. Use unshielded twisted-pair • (UTP) or shield t[...]
-
Page 79
75 A T -IFS802SP/POE(W)-80 User Manual Appendix A—RJ-45 P in Assignment The UTP/STP ports will automatically sense for Fast Ethernet (10Base-T/100Base-TX connections), • or Gigabit Ethernet (10Base-T/100Base-TX/1000Base-T connections). Auto MDI/MDIX means that the switch can connect to another switch or workstation without changing straight [...]
-
Page 80
76 A T -IFS802SP/POE(W)-80 User Manual 10/100Base-TX Cable Schematic • Thefollowingtw oguressho wthe10/100Base-TXcableschematic . Straight-thr ough cable schematic Cr oss over cable schematic 10/100/1000Base-TX Pin outs • Thefollowinggur eshowsthe10/100/1000EthernetRJ-45pinouts.[...]
-
Page 81
77 A T -IFS802SP/POE(W)-80 User Manual 10/100/1000Base-TX Cable Schematic • Straight thr ough cables schematic Cr oss over cables schematic[...]
-
Page 82
78 A T -IFS802SP/POE(W)-80 User Manual RJ-45 Pin Assignments of POE With 100B ASE-TX/10B ASE-T cable, pins 1 and 2 are used for transmitting data, and pins 3 and 6 for receiving data; pins 4, 5, 7 and 8 are used f or power suppl ying. Pin Signal 1 RX+ 2 RX- 3 TX+ 4 VCC - 5 VCC - 6 TX- 7 VCC + 8 VCC + Pin out of Cisco non-802.3af standard PD • [...]
-
Page 83
79 A T -IFS802SP/POE(W)-80 User Manual Appendix B—Command Sets Commands Set List User EXEC Privileged EXEC Globalconguration VLAN database Interfaceconguration E P G V I System Commands Set Allied T elesis Commands Lev el Description Example showcong E Shows witchconguration switch>showco[...]
-
Page 84
80 A T -IFS802SP/POE(W)-80 User Manual admin passw ord [Passw ord] G Speciesapassw ord (maximum 10 w ords) switch(cong)#adminpassw ordxxxxxx show admin P Show administrator information switch#sho w admin dhcpser ver enable G Enable DHCP Server switch(cong)#dhcpser verenable Dhcpser ver disable G Disable DHCP Server switch[...]
-
Page 85
81 A T -IFS802SP/POE(W)-80 User Manual P or t Commands Set Allied T elesis Commands Lev el Description Example interface fastEthernet [P or tid] G Choose the port for modication. switch(cong)#interfacefastEthernet2 duplex [full | half] I Use the duplex congurationcommandto specify the duplex mode of operation for Fast Ethern[...]
-
Page 86
82 A T -IFS802SP/POE(W)-80 User Manual bandwidth out [V alue] Set interface output bandwidth. Rate Range is fr om 100 kbps to 102400 kbps or to 256000 kbps for giga ports and zero means no limit. switch(cong)#interfacefastEthernet2 switch(cong-if)#bandwidthout100 show bandwidth I Show interfaces bandwidth contr ol switch(cong)#[...]
-
Page 87
83 A T -IFS802SP/POE(W)-80 User Manual T runk Commands Set Allied T elesis Commands Lev el Description Example aggr egator priority [1~65535] G Set port group system priority switch(cong)#aggr egatorpriority22 aggr egator activitypor t [Gr oup ID] [P or t Numbers] G Set activity port switch(cong)#aggr egatoractivitypor t2 aggr ega[...]
-
Page 88
84 A T -IFS802SP/POE(W)-80 User Manual VLAN Commands Set Allied T elesis Commands Lev el Description Example vlan database P Enter VLANconguremode s witch#vlan database Vlanmode [portbase| 802.1q | gvrp] V T o set switch VLAN mode. switch(vlan)#vlanmode portbase or switch(vlan)#vlanmode 802.1q or switch(vlan)#vlanmode gvrp no vlan V No [...]
-
Page 89
85 A T -IFS802SP/POE(W)-80 User Manual vlan 8021q trunk [P or tNumber] access-link untag [UntaggedVID] V Assign a access link for VLAN by trunk gr oup switch(vlan)#vlan 8021q trunk 3 access- link untag 33 vlan 8021q trunk [P or tNumber] trunk-link tag [T aggedVID List] V Assign a trunk link for VLAN by trunk gr oup switch(vlan)#vlan 8021q trunk 3 t[...]
-
Page 90
86 A T -IFS802SP/POE(W)-80 User Manual Spanning T ree Commands Set Allied T elesis Commands Lev el Description Example spanning-tree enable G Enable spanning tr ee switch(cong)#spanning-tr eeenable spanning-tree priority [0~61440] G Congur espanningtr ee priority parameter switch(cong)#spanning-tr eepriority 32768 spannin[...]
-
Page 91
87 A T -IFS802SP/POE(W)-80 User Manual stp-path-priority [P or t Priority] I Use the spanning-tr ee port-priority interface congurationcommandto congur eaportpriority that is used when tw o switches tie for position as the r oot switch. switch(cong)#interfacefastEthernet2 switch(cong-if)#stp-path-priority12[...]
-
Page 92
88 A T -IFS802SP/POE(W)-80 User Manual QOS Commands Set Allied T elesis Commands Lev el Description Example qos policy [weighted-fair|strict] G Select QOS policy scheduling switch(cong)#qospolicyw eighted- fair qos prioritytype [port-based|cos-only|tos- only|cos-rst|tos-rst] G Setting of QOS priority type switch(cong)#qospriori[...]
-
Page 93
89 A T -IFS802SP/POE(W)-80 User Manual IGMP Commands Set Allied T elesis Commands Lev el Description Example igmp enable G Enable IGMP snooping function switch(cong)#igmpenable Igmp-quer y auto G Set IGMP quer y to auto mode switch(cong)#Igmp-queryauto Igmp-quer y for ce G Set IGMP quer y to for ce mode switch(cong)#Igmp-queryforc[...]
-
Page 94
90 A T -IFS802SP/POE(W)-80 User Manual Mac / Filter T able Commands Set Allied T elesis Commands Lev el Description Example mac-addr ess-table static hwaddr [MA C] I Congur eMA Caddr ess table of interface (static). switch(cong)#interfacefastEthernet2 switch(cong-if)#mac-addr ess-tablestatic hwaddr 000012345678 mac-add[...]
-
Page 95
91 A T -IFS802SP/POE(W)-80 User Manual SNMP Commands Set Allied T elesis Commands Lev el Description Example snmp system-name [System Name] G Set SNMP agent system name switch(cong)#snmpsystem-namel2switch snmp system-location [System Location] G Set SNMP agent system location switch(cong)#snmpsystem-locationlab snmp system-contac[...]
-
Page 96
92 A T -IFS802SP/POE(W)-80 User Manual snmpv3 mibview vie w [View Name] type [Excluded|Included] sub-oid [OID] G Congur ethemibviewtable of SNMPV3 agent switch(cong)#snmpv3mibvie wview V1 type Excluded sub-oid 1.3.6.1 show snmp P ShowSNMPconguration switch#sho w snmp no snmp community- strings [Community] G Re[...]
-
Page 97
93 A T -IFS802SP/POE(W)-80 User Manual P or t Mirr oring Commands Set Allied T elesis Commands Lev el Description Example monitor [RX|TX|Both] I Congur esour cepor tof monitor function switch(cong)#interfacefastEthernet2 switch(cong-if)#monitorRX monitor rx [P or t ID] G Set RX destination port of monitor function swit[...]
-
Page 98
94 A T -IFS802SP/POE(W)-80 User Manual 802.1x Commands Set Allied T elesis Commands Lev el Description Example 8021x enable G Use the 802.1x global congurationcommandto enable 802.1x pr otocols. switch(cong)#8021xenable 8021x system radiusip [IP addr ess] G Use the 802.1x system radius IP global congurationcommandto[...]
-
Page 99
95 A T -IFS802SP/POE(W)-80 User Manual 8021x misc maxrequest [n umber] G Use the 802.1x misc max requestglobalconguration command to set the MAX requests. switch(cong)#8021xmiscmaxr equest3 8021x misc reauthperiod [sec.] G Use the 802.1x misc r eauth periodglobalconguration command to set the r eauth period. s[...]
-
Page 100
96 A T -IFS802SP/POE(W)-80 User Manual TFTP Commands Set Allied T elesis Commands Lev el Description Example backup ash:backup_cfg G Sa vecongurationto TFTP and need to specify the IP of TFTPser v erandthele name of image. switch(cong)#backupash:backup_cfg restor e ash:restor e_cfg G Getcongu[...]
-
Page 101
97 A T -IFS802SP/POE(W)-80 User Manual SystemLo g, SMTP and Ev ent Commands Set Allied T elesis Commands Level Description Example systemlog ip [IP addr ess] G Set System log ser ver IP addr ess. switch(cong)#systemlogip 192.168.1.100 systemlog mode [client|ser ver|both] G Speciedthelogmode s witch(cong)#systemlogmo[...]
-
Page 102
98 A T -IFS802SP/POE(W)-80 User Manual no ev ent device-cold-start G Disable cold star t ev ent type switch(cong)#noe ventdevice-cold- start no ev ent authentication- failure G Disable Authentication failure e vent typ switch(cong)#noe ventauthentication- failure no ev ent ring-topolog y- change G Disable X-ring topology changed e[...]
-
Page 103
99 A T -IFS802SP/POE(W)-80 User Manual SNTP Commands Set Allied T elesis Commands Level Description Example sntp enable G Enable SNTP function switch(cong)#sntpenable sntp da ylight G Enable da ylight sa ving time , if SNTP function is inactiv e, this command can’ t be applied. switch(cong)#sntpda ylight sntp da ylight-period [Start t[...]
-
Page 104
100 A T -IFS802SP/POE(W)-80 User Manual X-ring Commands Set Allied T elesis Commands Level Description Example ring enable G Enable X-ring switch(cong)#ringenable ring master G Enable ring master switch(cong)#ringmaster ring couplering G Enable couple ring s witch(cong)#ringcouplering ring dualhoming G Enable dual homing s witch(c[...]
-
Page 105
101 A T -IFS802SP/POE(W)-80 User Manual P oE Commands Set Allied T elesis Commands Level Description Example poe P EnterPOEcongur emode switch#poe system knock off-disabled [Enable|Disable] P Set P oE system Port Knock off Disabled switch(poe)# system knock off-disabled disable system ac-disconnect [Enable|Disable] P Set P oE system A C[...]