AMX NXD-700Vi manual

Go to page of 232

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of AMX NXD-700Vi, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of AMX NXD-700Vi one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of AMX NXD-700Vi. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of AMX NXD-700Vi should contain:
- informations concerning technical data of AMX NXD-700Vi
- name of the manufacturer and a year of construction of the AMX NXD-700Vi item
- rules of operation, control and maintenance of the AMX NXD-700Vi item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of AMX NXD-700Vi alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of AMX NXD-700Vi, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the AMX service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of AMX NXD-700Vi.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the AMX NXD-700Vi item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Operation/Reference Guide Touc h Panels Modero ® NXD-700Vi G4 Touch Panels 7” Modero Widescreen Vide o Touch Panels with Full Duplex Inter com Last Revised : 10/10/2 008[...]

  • Page 2

    AMX Limited Warr anty and Disclaimer All products re turned to AMX req uire a Return Mate rial Autho rization (RMA) nu mber . The RMA num ber is obtained from the AMX RMA Department. The RMA number mus t be cle arly mark ed on the outside of each box. Th e RMA is valid fo r a 30-day period. Af ter the 30-day period the RMA wil l be can celled. Any [...]

  • Page 3

    Software License and Warranty Agreement • LICENSE GRA NT . AMX grants to Licensee t he non-exclusive ri ght t o use the AMX Software in the m anner described in this License. The AMX Software is licensed, not sold. This license does not grant Licensee the right to create derivative wor ks of t he AMX Software. The AMX Software consists of general[...]

  • Page 4

    FCC Informat ion This dev ice co mplies w ith Part 15 of the FCC Ru les. Opera tion is subject to th e follo wing two condi tions: (1) this devic e may no t cause h armful interfe rence, and (2) thi s dev ice must acce pt any in terferenc e rece ived; inclu ding inte rferenc e that may cause undesi red op eration . Federal Commun icat ions Co mmiss[...]

  • Page 5

    Table of Contents i 7" Modero Widescreen T ouch Panels Table of Contents Introduc tion ... ..... ..... ..... ..... .... ........ .... ..... ..... ..... ....... ..... ..... ..... .... ..... ....... ..... ..... .. 1 NXD-700Vi Sp ecifications ....................... .................... .............................. ................ 3 NXD-700Vi [...]

  • Page 6

    ii 7" Modero Widescreen Touch Panels Table of Contents If Cal ibratio n Is Not Worki ng ............ ...... ........ ...... ...... ...... ...... ..... ...... ...... ...... ........ ...... .. 29 Configuring Communication ........ .. ..... ..... ....... ..... .... ..... ..... ..... ..... ....... ..... ..... .... 31 Modero S etup and Sy stem Sett[...]

  • Page 7

    Table of Contents iii 7" Modero Widescreen T ouch Panels Setup Pag e ................ ................... .............................. .................... ........................ 64 Information ......................... .................... .............................. .................... .............. 65 Project I nforma tion P age ..[...]

  • Page 8

    iv 7" Modero Widescreen Touch Panels Table of Contents Checking the Panel Stat istics............ ...... ...... ..... ...... ...... ......... ..... ...... ...... ...... ..... ...... ... 114 Refresh ing the Pa nel St atisti cs ............ ...... ..... ...... ...... ...... ...... ..... ......... ...... ...... ..... ...... 114 Clearing the Panel[...]

  • Page 9

    Table of Contents v 7" Modero Widescreen T ouch Panels SIP Comm ands ........... ................... .............................. .................... ...................... 181 Appendix A: Te xt F ormatting ........ ....... ..... .... ..... ..... ....... ..... ..... ..... ..... ....... ..... 185 Text Forma tting Co des for Bargr aphs/Joysti[...]

  • Page 10

    vi 7" Modero Widescreen Touch Panels Table of Contents[...]

  • Page 11

    Introduc tion 1 7" Modero Widescreen To uch Panels Introduction The NXD-700V i Modero W idescreen Color V ideo T ouch Panels with duplex intercom (FIG. 1) ar e the indu stry’ s f irs t wide scree n mini- touc h pane ls an d are a vaila ble onl y thr ough A MX. These Color V ideo (CV) panels display NTSC/P AL/SECAM video formats within v aria[...]

  • Page 12

    Introduc tion 2 7" Modero Widescreen To uch Panels  NXD-700V i panels support AMX C ompu ter Co ntr ol , which enables remote vie wing and control of any network ed computer directly from the panel. This gi ves th e user the ability to launch digital music from a PC, cruise the Internet, check and respond to E-mail, open software files, an [...]

  • Page 13

    Introduc tion 3 7" Modero Widescreen To uch Panels NXD-700Vi Specifications The following table ou tlines the specifications for the 7" W idescreen Modero p anels. Specifications for 7" W idescreen Video Touch Panels Dim ensi ons (H WD) : • NXA-RK7: metal rack-mount with black matte finish: (4 RU - rack units high) 6.97" x 19.[...]

  • Page 14

    Introduc tion 4 7" Modero Widescreen To uch Panels Specifications for 7" W idescreen Video Touch Panels (Cont.) Front P anel Component s: Light sensor: • Photosensitive light detector f or automat ic adjustment of the panel brightness (a dim room results in a dimmer LCD display , and a bright room results in a brighter LCD display). Not[...]

  • Page 15

    Introduc tion 5 7" Modero Widescreen To uch Panels Specifications for 7" W idescreen Video Touch Panels (Cont.) Side Pan el Componen t s (Cont.) : A udio/Video connector : • RJ-45 connector for c ommunication of differential audio/video signals to/from the touch panel (panel type dependant). This con nector receives Composite video, S t[...]

  • Page 16

    Introduc tion 6 7" Modero Widescreen To uch Panels NXD-700Vi Panels - Connector Layout FIG. 3 shows the layout of the connectors (located on the rear of th e base on the NXT an d on the left sid e panel of the NXD panels). Specifications for 7" W idescreen Video Touch Panels (Cont.) Other A MX Eq uipmen t (Cont. ): • Upgrade Compact Fla[...]

  • Page 17

    NXA-AVB/ETHERNET Breakout Box 7 7" Modero Widescreen To uch Panels NXA-AVB/ETHERNET Breakout Box The NXA-A VB/ETHERNET Breakout Box (FIG. 4) is included as part of the NXD-700V i Kit configuration ( pane l and box ) b ut can be purchased as a separate accessory . This box facilitates the installation and distribu tion of video, data, and audio[...]

  • Page 18

    NXA-AVB/ETHERNET Breako ut Box 8 7" Modero Widescreen To uch Panels Product Specifications Installing the NXA-AVB/ETHERNET A 12 VDC-compliant power supply can indirectly provide po wer to a Modero panel by routing power through the NXA-A VB/ETHERNET Breakout Box. FIG. 5 sh ows a sample wiring configuration u sing both an indirect or direct pow[...]

  • Page 19

    NXA-AVB/ETHERNET Breakout Box 9 7" Modero Widescreen To uch Panels A 12 VDC-compliant power supply can also directly provide po wer through the unit to a tar get Modero panel . FIG. 6 s hows a sample wiri ng con figuratio n for a no n-vid eo ca pable Modero panel. Use a standard CA T5 Ethernet cable to provide both communication and 10/100 net[...]

  • Page 20

    NXA-AVB/ETHERNET Breako ut Box 10 7" Modero Widescreen To uch Panels The rear-panel wiring connections are described below (from left to right): FIG. 7 NXA- AVB/ETHERNET Br eakout Box co nnector wi ring diagr am • AUDIO IN: 6-pin mini-Phoenix connec tor , divided into left and right audio chan nels. Each channel is divided i nto GND, IN+, an[...]

  • Page 21

    NXA-AVB/ETHERNET Breakout Box 11 7" Modero Widescreen To uch Panels Wiring the NXA-AVB/ETHERN ET for Unbalanced Audio Most do mesti c audi o equ ipment has un balan ced aud io in puts an d outp uts. This m eans t hat th e audi o outpu t (lef t, right, or mono ) appear s on a s ingle w ire, an d is refer ence d to "0 V" or "Groun[...]

  • Page 22

    NXA-AVB/ETHERNET Breako ut Box 12 7" Modero Widescreen To uch Panels When connecting the MIC OUT connector to a balanced audio input (FIG . 9), use all three audio terminals (+, -, and GND), then connect the "+" terminal to the "liv e" signal, the "-" terminal to the "return" signal, and the "GND&qu[...]

  • Page 23

    NXD-700Vi Touch Panel Accessories 1 7" Modero Widescreen To uch Panels NXD-700Vi Touch Panel Accessories The following section outlines and d escribes the other AMX equipment av ailable for these touch panels. NXA-WC80211B/CF 802.11b Wireless Card (FG2255-03) These t ouch pane ls can conn ect to a wirel ess netw ork usin g an option al AMX 802[...]

  • Page 24

    NXD-700Vi Touch Panel Accessories 2 7" Modero Widescreen To uch Panels NXA-WC80211GCF 802.11g Wireless Ca rd (FG2255-07) These panels can also connect to a wireless network using the (optional) 802.11g W i-Fi CF card. This internal WIC (FIG. 2) can be purchased separately as a Wi-Fi u pgrade kit from AMX. This interface card ( FG2255 -07 ) is [...]

  • Page 25

    NXD-700Vi Touch Panel Accessories 3 7" Modero Widescreen To uch Panels This card works with compatible 802.11b/g W ireless Access Points such as the NXA-W AP200G ( which uses a d efau lt SSID of AMX ). Please follo w your particular W ireless Access Point’ s instruction manual for the correct procedures to setup either a secured or unsecured[...]

  • Page 26

    NXD-700Vi Touch Panel Accessories 4 7" Modero Widescreen To uch Panels NXA-WC8 0211GCF S pecifica tions (Con t.) Network Architecture: • Infrastructure mode ( Client-to-Access Point) Operating Channels: • Using 802.1 1b & g communication: - 04: ( Ch 10 - 13) - France - 1 1: (Ch 1 - 1 1) - North America - 13: ( Ch 1 - 13) - Europe E TSI[...]

  • Page 27

    NXD-700Vi Touch Panel Accessories 5 7" Modero Widescreen To uch Panels NXA-WC8 0211GCF S pecifica tions (Con t.) T ransmit Output Power: • 802.1 1b communication: 12 +-1 dBm (1, 2, 5.5, 1 1 Mbps) • 802.1 1g communication: 12 +-1 dBm (6, 9, 12, 18, 24, 36, 48, and 54 Mbps) Wireless LAN Security: • EAP-FAST • EAP-LEA P •E A P - P E A P[...]

  • Page 28

    NXD-700Vi Touch Panel Accessories 6 7" Modero Widescreen To uch Panels[...]

  • Page 29

    NXA-CFSP Compact Flash (FG2116-7x) 7 7" Modero Widescreen To uch Panels NXA-CFSP Compact Flash (FG2116-7x ) Every NXD-700V i Modero panel is shipped with a 128 MB Compact Flash card (NXA-CFSP). The NXA-CFSP Compact Flash card is factory programmed with specif ic panel firmw are and can be upgraded to se v eral sizes, up to 1GB: Upgr ading t he[...]

  • Page 30

    NXA-CFSP Compact Flash ( FG2116-7x) 8 7" Modero Widescreen To uch Panels[...]

  • Page 31

    Installation and Upgrade of the Internal NXD Components 9 7" Modero Widescreen To uch Panels Installation and Upgrade of t he Interna l NXD Components Upgrading the card s within the W allMount pane l in v olves remov ing the rear p lastic outer housing (b ack box), removing the e xisting card, replacing it, and th en placing the back box back[...]

  • Page 32

    Installation and Upgrade of the Internal NXD Components 10 7" Modero Widescreen To uch Panels 6. Carefully lift-off the back box housing and angle it o ver to the side of the unit where the wires are connected to the circuit board. 7. Gently lay the back box to one side of th e unit. This exposes the internal circuit board (FIG. 4). T ake care[...]

  • Page 33

    Installation and Upgrade of the Internal NXD Components 11 7" Modero Widescreen To uch Panels 6. T o complete the upgrade process, either upgrade the remaining wirele ss card (Step 3) or close and re-secure the enclosure using the procedures in Step 3: Cl ose a nd Re secu r e t he NXD P ane l Enclosure section on page 11 . Step 3: Close and Re[...]

  • Page 34

    Installation and Upgrade of the Internal NXD Components 12 7" Modero Widescreen To uch Panels[...]

  • Page 35

    Installation 13 7" Modero Widescreen To uch Panels Installation NXD-700V i pane ls are installed into either a pre- wall surface (using a CB-TP7 conduit/wallbox) or a solid surface (using either solid surface or drywall scre ws). Installing the No -Button Trim Ring The NXD-700V i p anel is shipped from AMX with the def ault Button T r im Ring [...]

  • Page 36

    Installation 14 7" Modero Widescreen To uch Panels 5. From along the internal surface of the Faceplate, remove th e six b uttons by gently bending each Button latch up and pulling the b utton outw ards. 6. Remo ve the pair of clear light pipe st rips by ben ding th e tw o bl ack lig ht pipe latch es inw ards and pulling out the strip. 7. Grasp[...]

  • Page 37

    Installation 15 7" Modero Widescreen To uch Panels 5. From along the internal surface of the Faceplate, install the six b uttons by firmly inserting them into the button o penings until the Button latch secures the b utton in place (FIG. 9). 6. Install the pair of clear light pipe strips by pushing light pipes ov er the two black light pipe la[...]

  • Page 38

    Installation 16 7" Modero Widescreen To uch Panels 10. Place the Faceplate back onto th e main NXD-700V i unit. Make sure to align the Micr ophone, Light, and PIR Motion sensor locations on the main unit to their respectiv e openings on the F aceplate assembly . Pre-Wall Instal lation of the Conduit Box W all Mount panels (NXDs) are contained [...]

  • Page 39

    Installation 17 7" Modero Widescreen To uch Panels 3. Remove the wi ring knockout s from t he left side o f the co nduit b ox (CB- TP7) (FIG. 1 1) to accommodate the cables being threaded through to the NXD touch panel. 4. Thre ad the inco ming p o wer , RJ-4 5 audi o/vid eo, Ethe rnet , and US B wir ing th roug h th e knoc kout s ( use of the[...]

  • Page 40

    Installation 18 7" Modero Widescreen To uch Panels 2. V erify the incoming power , RJ-45 audio/video, Ethernet, and USB cables hav e been properly threaded through the wiring knockouts on the left of the conduit box. Leave enough slac k in the wiring to accommodate any r e- positioning of the panel. 3. Conne ct all da ta and p o wer wi ring co[...]

  • Page 41

    Installation 19 7" Modero Widescreen To uch Panels 3. Remove the F aceplate/bezel ( A in FIG. 14) f rom the main NXD unit ( B in FIG. 14) by gri pping the faceplate and pulling with gentle outward force. 4. Thread the in coming power , RJ- 45, Ethernet, USB, and any optional audio/video wiring ( from their terminal locations) through the surfa[...]

  • Page 42

    Installation 20 7" Modero Widescreen To uch Panels 6. T est the incoming wiring by attaching the panel connections to their te rminal locations and applyi ng power . V erify the panel is receiving po wer and functioning properly to preven t repetition of the installation. 7. Disconnect the terminal end of the po wer cable from the connected po[...]

  • Page 43

    Installation 21 7" Modero Widescreen To uch Panels 13. Reconnect the terminal po wer connector on the 12 VDC-compliant power supply and apply po wer . Install ing the NXD into a Flat S urface using # 4 screws Mounting screws (#4-40, included) are secured through two s ets of circular holes located at the left and right sides of the NXD-700V i.[...]

  • Page 44

    Installation 22 7" Modero Widescreen To uch Panels  V er ify that the terminal end of the power cable is not connected to a po wer source before plug ging in the 2 -pin po wer conne cto r .  The USB connectors can be from a either a USB e xtension cable, or a wireless USB RF transmitter . 6. T est the incoming wiring by connecting the pa[...]

  • Page 45

    Installation 23 7" Modero Widescreen To uch Panels Installing an NX D-700Vi i nto an (op tional) Rack Mount Kit (NXA-RK7) The NXA-RK7 is a 19" (48.3 cm) wide metal rack-mount (with black matte fin ish) measuring 4 rack u nits hi gh. 1. Remov e the Faceplate/T rim Ring assembly from the main NXD-700V i unit. 2. Thread the incoming power , [...]

  • Page 46

    Installation 24 7" Modero Widescreen To uch Panels Wiring Guidelines for the NXD-700Vi Panels NXD-700V i pane ls use a 12 VDC-compliant po wer supply to pro vide power to the panel via the 2-pin 3.5 mm mini-Phoenix PWR connector . Use the previously provided po wer requirement information to determine the power draw . The in comi ng PWR and G [...]

  • Page 47

    Installation 25 7" Modero Widescreen To uch Panels Audio/Video Port: Co nnections and Wiring The f ollo wing table s ho ws the signa l and p inout/ pair ing inf orm ation u sed o n the RJ -45 Aud io and V ideo connections. Ethernet/RJ-45 Port: Connections and Wiring FIG. 18 describes the blink activ ity for the Ethernet 10/100 Base-T RJ-45 con[...]

  • Page 48

    Installation 26 7" Modero Widescreen To uch Panels The following table lists the pinouts, signals, and pairing associated with the Ethernet connector . FIG. 19 diagrams the RJ-45 pinouts and signals for the Ethernet RJ-45 connector and cable. USB Port: Connecting and Using Input Devices The NXD-700V i p anel can hav e up to tw o USB-capable in[...]

  • Page 49

    Panel Calibration 27 7" Modero Widescreen To uch Panels Panel Calibration This section outlines the steps for calibrating the touch panel. It is r ecommended that you calibr ate the panel befor e its initial use and after completing a f irmwar e download. Modero panels are factory setup with specific d emo touch panel pages. The f irst splash [...]

  • Page 50

    Panel Calibration 28 7" Modero Widescreen To uch Panels Testi ng your Calibr ation 1. Press and hold do wn the on-screen Calibration button for 6 seconds to enter the Calibration T est page (F IG. 2 3). 2. Press anywhere on this page to conf irm the on-screen crosshairs match your touch points. 3. If the crosshairs do not appear directly below[...]

  • Page 51

    Panel Calibration 29 7" Modero Widescreen To uch Panels If Calibrati on Is Not Working Cycling po wer to the panel should pro vide a baseline calibration for the particular touch panel. Re- calibrate the panel.[...]

  • Page 52

    Panel Calibration 30 7" Modero Widescreen To uch Panels[...]

  • Page 53

    Configuring Communication 31 7" Modero Widescreen To uch Panels Configuring Communication Communication between the Modero panel and the Master is done using either USB or ETH ERN ET ( DHCP or Static IP ). Ethernet communication can be achiev ed through either a direct connection (Ethe rnet) or th roug h the use of the optiona l NXA -WC802 .11[...]

  • Page 54

    Configuring Communication 32 7" Modero Widescreen To uch Panels Setting the Panel ’s Device N umber In the Pr o tected Setup page: 1. Press the Device Nu mber f ield to open the De vice Number keypad (FIG. 25). Enter a unique Device Number assignment for the panel , and press Done to return to the Pr otected Setup page. The De vic e Nu mber [...]

  • Page 55

    Configuring Communication 33 7" Modero Widescreen To uch Panels Configuring a Wireless Network Access When working with a wireless card, th e first step is to configure wireless com munication parameters within the W ireless Settings page. This page o nly configures the card to communicate to a target W AP (such as the NXA-W AP200G), it is sti[...]

  • Page 56

    Configuring Communication 34 7" Modero Widescreen To uch Panels 6. Setup the security and communication parameters between the wireless card and the target W AP by configuring the W ireless Settings section on this page. Refer to Step 2: Configu r e the C ar d’s W ireless S ecurity Settings section on page 36 for detailed procedures to setup[...]

  • Page 57

    Configuring Communication 35 7" Modero Widescreen To uch Panels In the Pr o tected Set up page: 1. Press the Wir ele ss Settings button (located on the lo wer -left) to open the W ireless Settings page. 2. Na vigate to the Access Point MA C Address section of this page and press the on-screen Site Survey button. This action launches the Site S[...]

  • Page 58

    Configuring Communication 36 7" Modero Widescreen To uch Panels 4. Select a desired Access Point by touching the corresponding row . The up arro w and do wn arrow will be grayed out if there are ten or less access points detected. If there are more, then they will be enabled as appropriate so that the user can scroll through the list. 5. W ith[...]

  • Page 59

    Configuring Communication 37 7" Modero Widescreen To uch Panels Configuring the Moder o’s wir eless card for unse cured a ccess to a WAP2 00G In the Pr o tected Set up page: 1. Press the Wir ele ss Settings button (located on the lo wer -left) to open the W ire less Settings page. 2. Enter the SSID information by either :  Automatically h[...]

  • Page 60

    Configuring Communication 38 7" Modero Widescreen To uch Panels 4. Press the red SSID f ield (FIG. 30) to dis play an o n-scr een Network Name ( SSID) keyboard. 5. In this keyboard, enter the SSID name used on your target W ireless Access Point ( case sensitiv e ).  The card should be gi ven the SSID used by the target W AP . If th is field[...]

  • Page 61

    Configuring Communication 39 7" Modero Widescreen To uch Panels Conf iguri ng the Mod ero’s wi rele ss card fo r secure d access to a WAP2 00G After logging into the W A P200G, the default Statu s page appears within the web bro wser . These read-only values are "pulled" from some of the other user -configurable Conf iguration Util[...]

  • Page 62

    Configuring Communication 40 7" Modero Widescreen To uch Panels Manually set SSID In the Pr o tected Set up page: 1. Select Wir eless Settings . 2. Locate the W ireless Security section (FIG. 32). 3. Press the Static WEP b utton to open the Static WEP Settings dialog (FIG. 33). 4. Press the SSI D f ie ld and from the Network Name (SSI D) k e y[...]

  • Page 63

    Configuring Communication 41 7" Modero Widescreen To uch Panels  As an example, if you use TECHPUBS as you r SSID , you m ust match this word and the case within both the Network Name (S SID ) fi eld on the touch panel ’ s Network N ame SSI D field and on th e W A P’ s Basic W ireless Config uration page. 5. T oggle the Encryptio n fiel[...]

  • Page 64

    Configuring Communication 42 7" Modero Widescreen To uch Panels  As an example, enter the word AMXPanel using a 128- bit hex digi t encr ypt ion. A fte r pres sing Done , the on-screen Current K ey f ield displays a long string of characters (separated by colons) which represents the encryption ke y equiv alen t to the word AMXP anel.  T[...]

  • Page 65

    Configuring Communication 43 7" Modero Widescreen To uch Panels Configuring multiple wire less Moderos to comm unicate to a targe t WAP200G 1. For each communicating touch panel, complete all of the steps o utlined within the pre vious Conf iguring the Moder o’ s wir eless car d for secur ed acce ss to a W AP200G sect ion on page 39 . 2. Na [...]

  • Page 66

    Configuring Communication 44 7" Modero Widescreen To uch Panels Prepare y our PC for USB communi cation wit h the panel If you hav en’t already done so, download and install the latest versions of NetLinx Studio2 and TPDe sign4 (f rom www .a mx.com ), and rest art you r PC. Configure t he pa nel for USB communicati on The first time the pan [...]

  • Page 67

    Configuring Communication 45 7" Modero Widescreen To uch Panels the panel. It also indicates that the AMX USBLAN dri ver does n ot contain a Microsoft ® digital sign atur e. 8. Click Ye s to proceed with the dri ver installation. Once the installation is complete, the panel and PC are ready to communicate via USB. 9. Na vigate back to the Sys[...]

  • Page 68

    Configuring Communication 46 7" Modero Widescreen To uch Panels 3. Click the Communications Settings bu tton to open the Communications Settings dialog . 4. Click the Net Lin x M as te r radio button ( from the Platform Selection sectio n ). 5. Click the Virtual Master r adio bu tton ( fr om the T ra nsport Connection Option section ). 6. Clic[...]

  • Page 69

    Configuring Communication 47 7" Modero Widescreen To uch Panels Ethernet 1. When usin g Ethernet , press the listed Mode to toggle through the a v ailable connection modes: 2. Select the Master P ort Number to open the ke ypad and change this value. The default setting for the port is 1319 . 3. Set your Ma ster Por t a nd se lec t Done . If yo[...]

  • Page 70

    Configuring Communication 48 7" Modero Widescreen To uch Panels 4. Click the Communications Settings bu tton to open the Communications Settings dialog. 5. Clic k on the NetLinx Master radio b utto n ( fr om the Platform Selection section ) to indicate that you are working as a NetLinx Master . 6. Click on the V irtu al Ma st er ra dio b ox ( [...]

  • Page 71

    Configuring Communication 49 7" Modero Widescreen To uch Panels 15. Press the blue Ty p e fie l d ( from the Master Connection section ) until the choice cycles to the w ord Ethernet . 16. Press the Mode field until th e choice cycles to the word URL .  By selectin g URL , the System Number field becomes read-only (grey) because the panel p[...]

  • Page 72

    Configuring Communication 50 7" Modero Widescreen To uch Panels Using G4 We b Cont rol to Interact w ith a G4 Panel The G4 W eb Con trol feature allows you to use a PC to intera ct with a G4 ena bled panel via th e web . This feature works in tandem with the ne w bro wser-capable NetLinx Security f irmware update ( b uild 300 or higher ). G4 W[...]

  • Page 73

    Configuring Communication 51 7" Modero Widescreen To uch Panels 9. From the W eb Name key board, enter a unique alpha-numeric string to identify this panel. This information is used by the NetLin x Security W eb Server to display on-screen links to the panel. The on-scr een links use the IP Addr ess of the panel and not the name for communicat[...]

  • Page 74

    Configuring Communication 52 7" Modero Widescreen To uch Panels Using your NetLinx Master to control the G4 panel Refer to your particular NetLinx Master’ s instruction manual for detailed information on how to download the latest f ir mware from www .amx.com . This firmware build enables SSL certificate identification and encryption, HTTPS [...]

  • Page 75

    Configuring Communication 53 7" Modero Widescreen To uch Panels 6. Click on the G4 panel name link associa ted with the target panel. A secondary web browser windo w appears on the screen (FIG. 45). 7. Click Ye s from the Security Alert popup window to agree to the installation of the G4 W eb Control application on your computer . Th is applic[...]

  • Page 76

    Configuring Communication 54 7" Modero Widescreen To uch Panels 10. Enter the W eb Control session password into the Sessi on P ass word field (FIG. 46). This passw or d was previousl y ente r ed int o the W eb Cont r ol P assw or d field withi n the G4 W eb Cont r ol page on t he pane l. 11. Click OK to send the passw ord to the panel and beg[...]

  • Page 77

    Upgrading Moder o Fir mware 55 7" Modero Widescreen To uch Panels Upgrading Mode ro Firmware Before be ginni ng th e Upg rade pr ocess :  Setup and conf ig ure yo ur Ne tLinx Maste r . Refer t o th e your part icula r Net Linx Master Instr uctio n Manu al for de taile d set up pr ocedur es.  Calibrate and prepare the co mmunication pages[...]

  • Page 78

    Upgradi ng Modero Firm ware 56 7" Modero Widescreen To uch Panels 5. Press the Back b utton on the touch panel to return to the Protected Setup page. 6. Press the on-screen Reboot button to both sa ve an y changes and r estart the panel. Remember that the panel’ s co nnection type must be set to USB prior to r ebooting the panel and prior to[...]

  • Page 79

    Upgrading Moder o Fir mware 57 7" Modero Widescreen To uch Panels 7. From within this dialog enter the System number (default is 1 ). 8. Click OK three times to close the open dialogs, sav e your settings, and return to the main NetLinx Studio application. 9. Click the OnLine T r ee tab in the W orkspace window to view th e dev ices on the V i[...]

  • Page 80

    Upgradi ng Modero Firm ware 58 7" Modero Widescreen To uch Panels 5. If the panel firmware being used is n ot current, do wnload the latest Kit file by f irst logging in to www .amx.com and then na vig ate to T ech Center > Firmware Files a nd from within the Moder o sectio n of the we b pag e loc ate yo ur M odero pan el. 6. Click on the d[...]

  • Page 81

    Upgrading Moder o Fir mware 59 7" Modero Widescreen To uch Panels Upgrading the Modero Firmwa re via Ethernet (IP Address) Before beginning with this section, v erify that your panel is po wered and connected to the NetLinx Master through an Ethernet connectio n (direct or wireless). Step 1: P repare t he Maste r for commu nication v ia an IP [...]

  • Page 82

    Upgradi ng Modero Firm ware 60 7" Modero Widescreen To uch Panels 8. Click the New b utton to open the Ne w TCP/IP Settings dialog where you can enter both a prev iously obtained DHCP or Static IP Address and an associated description for the connection into their respecti ve f ie lds. 9. Place a checkmark within the Automatically Ping the Mas[...]

  • Page 83

    Upgrading Moder o Fir mware 61 7" Modero Widescreen To uch Panels 6. Press the Back b utton to return to the Protected Setup page and press the on-screen Reboot b utton to restart the panel and sa ve an y changes. Step 3: V erify and Upgr ade the p anel f irmware v ia an I P 1. Click the OnLine T ree tab in the W o rkspace windo w to vie w the[...]

  • Page 84

    Upgradi ng Modero Firm ware 62 7" Modero Widescreen To uch Panels 7. Select the panel’ s Kit file from the Files sectio n (F IG. 5 2). 8. Enter the Device v alue associated with the p anel and the System number associated with the Master ( listed in the OnLine T ree ta b of the W orkspace window ). The P ort f ield is gr eyed-out. 9. Click t[...]

  • Page 85

    Firmwar e P ages a nd Descr iptio ns 63 7" Modero Widescreen To uch Panels Firmware Pages and Descriptions This section describes each firmware page and their specific functional elements. Setup Navigation Buttons These Setup Navigatio n Buttons (FIG. 53) appear on the left of the panel screen when the Setup page is currently acti ve. Prot ect[...]

  • Page 86

    Firmwar e P ages a nd Descr iptio ns 64 7" Modero Widescreen To uch Panels Setup Page This page (FIG. 5 4) c enter s arou nd bas ic Mo der o panel prope rtie s suc h as: Connect ion S tatu s of the panel, Display T im eout, Inacti vity P age Flip T im e, Inactiv ity page f ile, and the Pa nel Brightness. The elements of the Setup page are desc[...]

  • Page 87

    Firmwar e P ages a nd Descr iptio ns 65 7" Modero Widescreen To uch Panels Informa tion The Infor mat ion b utton provides a menu to select either the Pr oject Information P ag e section on page 66 or th e P anel Information P age sectio n on page 67. Select either o ption to access that page. Setup Page Elements (Cont.) Inactivity Page F lip [...]

  • Page 88

    Firmwar e P ages a nd Descr iptio ns 66 7" Modero Widescreen To uch Panels Proj ect Info rmat ion Pa ge The Pr oject Info rmat ion page displ ays the T PDes ign4 (T PD4) pr ojec t f ile pro pert ies cur rent ly load ed on the selected Modero panel (FIG. 56). Refer to the TPDes ign4 T ouch P a nel P r ogram instruction manual for m ore de tail [...]

  • Page 89

    Firmwar e P ages a nd Descr iptio ns 67 7" Modero Widescreen To uch Panels Panel Info rmation Pag e The P ane l Inf ormati on pa ge (FI G. 5 7) cent ers a round Mode ro pa nel p ropert ies s uch as : res oluti on used , on-boar d memory , f irmware, addr ess/channel in formation , and string in formation . The elements of the Panel Information[...]

  • Page 90

    Firmwar e P ages a nd Descr iptio ns 68 7" Modero Widescreen To uch Panels Panel Information Page Elements (Cont.) Panel T ype: Displays the model of the Modero panel being used. Firmware V ersion: Displays the G4 firmware version being used by the panel. • V erify yo u have the latest version from www.amx.c om . Setup Por t: Displays the se[...]

  • Page 91

    Firmwar e P ages a nd Descr iptio ns 69 7" Modero Widescreen To uch Panels Time & Date Setup Page The options on the T ime & Date Setup page (FIG. 58) allo w you to set and adjust time and date information on the NetLinx Master . If th e time and/or date on the Master is modif ied, all connected de vices will be updated to reflect the [...]

  • Page 92

    Firmwar e P ages a nd Descr iptio ns 70 7" Modero Widescreen To uch Panels Volu me Pag e The V olu me page (F IG. 5 9) ( accesse d by pr essing the A udio Adjustm ents b utton o n the Set up pa ge ) allo ws you to adjust the master v olume parameters and def ault panel sounds on the panel. The elements of the V olume page are described in the [...]

  • Page 93

    Firmwar e P ages a nd Descr iptio ns 71 7" Modero Widescreen To uch Panels En vironmental acoustics, personal voice le v el and ambient noise are all deciding factors when setting your mic, intercom and panel sound le v els. Consider your en vironm ent when adjusting intercom and sound le vels an d use caution so as not to damage the speaker .[...]

  • Page 94

    Firmwar e P ages a nd Descr iptio ns 72 7" Modero Widescreen To uch Panels Suppor ted sa mplin g rates fo r WAV The following is a listing of supported sampling rates associated for W A V f iles played on NXD-700V i panel s. Some W A V files cu rre ntly pl ayed o n Mode ro's ma y not work on the se pan els. The supp orte d sampling rates [...]

  • Page 95

    Firmwar e P ages a nd Descr iptio ns 73 7" Modero Widescreen To uch Panels The elements of the V id eo Setup page are described in the table below: Video Setup Page Elements Back: Saves the changes and returns you to the previously active touch panel p age. Conn ecti on Status ic on: This visual display of the connection status a llows the use[...]

  • Page 96

    Firmwar e P ages a nd Descr iptio ns 74 7" Modero Widescreen To uch Panels Protected Set up Na vigatio n Bu ttons The Protected Setup Navigation Buttons (FIG. 61) appear on the left of the panel screen when the Protected Setup page is currently activ e. FIG. 6 1 Prote cted Setup Navigation Butt ons Press to ac cess the S ystem Settings page wh[...]

  • Page 97

    Firmwar e P ages a nd Descr iptio ns 75 7" Modero Widescreen To uch Panels Protected Setup Page The Pr otecte d Se tup pag e (F IG. 62) cen ters around the pr ope rties used by the panel to pro perly communicate with the NetLinx Master . Enter the factory default password ( 19 88) into the password ke ypad to access this page. The elements of [...]

  • Page 98

    Firmwar e P ages a nd Descr iptio ns 76 7" Modero Widescreen To uch Panels Protected Setup Page Elements (Cont.) System Recovery: Allows you to either reset t he touch panel to f actory default settings and/or wipe out all existing touch panel pages: • The Reset System Set tings button allows a user to wipe out all current configuration para[...]

  • Page 99

    Firmwar e P ages a nd Descr iptio ns 77 7" Modero Widescreen To uch Panels System Set tings Page The System Settings page (FIG. 6 5) sets the Secondary DNS Address in formation with its corresponding IP communication parameters, NetLinx Master communication settings, and reads the device number assig ned t o the Moder o pane l. The elements of[...]

  • Page 100

    Firmwar e P ages a nd Descr iptio ns 78 7" Modero Widescreen To uch Panels System Settings Page Element s (Cont.) IP S etti ngs: Sets the IP comm unication values f or the panel and contains: DHCP/Static S ets the p anel to eit her DHCP or S t atic communication modes. • DHCP (Dynam ic Host Configuration Protocol) assigns IP Addresses from c[...]

  • Page 101

    Firmwar e P ages a nd Descr iptio ns 79 7" Modero Widescreen To uch Panels Refer to the Step 3: C hoose a Mast er Conn ection Mode sectio n on page 43 for more detailed inf ormation on using the System Settings page. Wire less Settin gs Page Use the options on the W i reless Settings page (FIG. 66) to conf igure communication settings for the [...]

  • Page 102

    Firmwar e P ages a nd Descr iptio ns 80 7" Modero Widescreen To uch Panels Wireless Settings Pag e (Cont.) IP S etti ngs: Sets the IP communication values for the panel: DHCP/ST A TIC Sets the p anel to either DHCP or S tat ic communication modes. • DHCP - a temporary IP Addresses is assigned to the p anel by a DHCP serv er . • Sta t i c I[...]

  • Page 103

    Firmwar e P ages a nd Descr iptio ns 81 7" Modero Widescreen To uch Panels Wireless Settings Pag e (Cont.) Wireless Security (Cont.): WP A-PS K This button opens the WP A-PSK Settings page (FIG . 69 on page 86). “WP A-PSK” security is designed for environments where is it desirable t o use WP A or WP A2, but an 802.1x a uthentication serve[...]

  • Page 104

    Firmwar e P ages a nd Descr iptio ns 82 7" Modero Widescreen To uch Panels Seconda ry Connect ion Page The Secondary Connection page sets the communication inform ation for an installed wireless interface card. The NXD-CV5 T ouch panel is not enabled for wireless communication and therefo re, this page is not us er-editabl e. Wireless Secur it[...]

  • Page 105

    Firmwar e P ages a nd Descr iptio ns 83 7" Modero Widescreen To uch Panels Open (Cl ear Text) Sett ings Press the Open ( Cle ar T ext ) button to open the Open (Clear T ext) Settings page (FIG. 67). Wireless Securi ty pages (e ach Wi Fi ca rd supports different securit y featur es) FIG. 6 7 Wirel ess Setting s page - Open (Clear Text) Settings[...]

  • Page 106

    Firmwar e P ages a nd Descr iptio ns 84 7" Modero Widescreen To uch Panels Open security does not utilize any encryption methodology , but requires an SSID (alpha-nu meric) entry . This entry must match the Network Name (SSID) entry of the target W AP so the panel knows wh at de vice it is using to communicate with the networ k.  Refer to t[...]

  • Page 107

    Firmwar e P ages a nd Descr iptio ns 85 7" Modero Widescreen To uch Panels Static WEP security requires that both a target W AP be identified and an encryption method be implemented prior to establishing communication. In addition to providing both Open and Shared Authentication capabilities, this page also supports He xadecimal and ASCII ke y[...]

  • Page 108

    Firmwar e P ages a nd Descr iptio ns 86 7" Modero Widescreen To uch Panels  Refer to the Configuring a W ir eless Network Access sectio n on page 3 3 for further deta ils on these security options.  Refer to the Using the Site Surve y tool section on page 34 for more information on using this feature. WPA-PS K Settings Press the Static W[...]

  • Page 109

    Firmwar e P ages a nd Descr iptio ns 87 7" Modero Widescreen To uch Panels WP A-PSK security is designed for en vironments where is it desirable to use WP A or WP A2, but an 802.1x authentication server is not a v ailable. PSK connections are more secure than WEP and are simpler to configure since they implement dynamic keys b ut share a key b[...]

  • Page 110

    Firmwar e P ages a nd Descr iptio ns 88 7" Modero Widescreen To uch Panels EAP-LEAP Settings Press the EAP-LEAP button to o pen the EAP-LEAP Settings page (FIG. 70). EAP (Extensible Authentication Protocol) is an Enterp rise authentication protocol that can be used in both wi red a nd wire less netwo rk environmen ts. EA P requ ires the us e o[...]

  • Page 111

    Firmwar e P ages a nd Descr iptio ns 89 7" Modero Widescreen To uch Panels EAP-LEAP Settings (Cont.) Identity: Opens an on-screen key board. Enter an EAP Ident ity string (used by the panel to identify itself to an Authentication (R ADIUS) Ser ver). Note : This informa tion is similar to a username used t o login to a se cured server or workst[...]

  • Page 112

    Firmwar e P ages a nd Descr iptio ns 90 7" Modero Widescreen To uch Panels  Refer to the EA P Authentication section on page 195 for further details on these security options.  Refer to FIG. 71 for an example of what a typical EAP-LEAP system configuration page would lik e. EAP-FAST Setti ngs Press the EAP-F AST button to open the EAP-F [...]

  • Page 113

    Firmwar e P ages a nd Descr iptio ns 91 7" Modero Widescreen To uch Panels authenticate itself. Automatic certificate do wnloading is co n v enient bu t slightly less secure, since its the certificate is transferred wirelessly and could theoretically be “snif fed-out”. EAP-FAST Settings SSID (Service Set Identi fier): Opens an on-screen ke[...]

  • Page 114

    Firmwar e P ages a nd Descr iptio ns 92 7" Modero Widescreen To uch Panels  Refer to the EA P Authentication section on page 195 for further details on these security options.  Refer to the Using the Site Surve y tool section on page 34 for more information on using this feature. EAP-PEAP Settings Press the EAP-PEAP b utton to open the E[...]

  • Page 115

    Firmwar e P ages a nd Descr iptio ns 93 7" Modero Widescreen To uch Panels EAP-PEAP security is designed for wireless env ironments where it is necessary to transmit data securely over a wireless n etwork.  Refer to the EA P Authentication section on page 195 for further details on these security options. EAP-PEAP Settings SSID (Service Set[...]

  • Page 116

    Firmwar e P ages a nd Descr iptio ns 94 7" Modero Widescreen To uch Panels  Refer to the Using the Site Surve y tool section on page 34 for more information on using this feature. EAP-TTLS Setti ngs Press the EAP-TTLS b utto n to opens the EAP-TTLS Settings page (FIG. 74). TTLS (EAP T unneled T ransport Layer Security) is an authentication [...]

  • Page 117

    Firmwar e P ages a nd Descr iptio ns 95 7" Modero Widescreen To uch Panels  Refer to the EA P Authentication section on page 195 for further details on these security options.  Refer to the Using the Site Surve y tool section on page 34 for more information on using this feature. EAP-TTLS Settings (Cont.) Identity: Opens an on-screen key[...]

  • Page 118

    Firmwar e P ages a nd Descr iptio ns 96 7" Modero Widescreen To uch Panels EAP-TLS Settin gs Press the EAP-TLS b utton to open the EAP-TLS Settings page (FIG. 75). TLS (T ransport Layer Security) was the original standard wireless LAN EAP authentication protocol. TLS requires additional wor k during the deployment phase but provides additional[...]

  • Page 119

    Firmwar e P ages a nd Descr iptio ns 97 7" Modero Widescreen To uch Panels  Refer to the EA P Authentication section on page 195 for further details on these security options.  Refer to the Using the Site Surve y tool section on page 34 for more information on using this feature. Client cer tificate configur ation There are several w ays[...]

  • Page 120

    Firmwar e P ages a nd Descr iptio ns 98 7" Modero Widescreen To uch Panels AMX supports the follo wing security certif icates  PEM (Pri vac y Enhanced Mail)  DER (Distinguished Encoding Rules)  PKCS12 (Pub lic K ey Cryp togra phy S tanda rd #1 2) Certificate f iles frequently use 5 f ile e xtensions. It can be confusing because there [...]

  • Page 121

    Firmwar e P ages a nd Descr iptio ns 99 7" Modero Widescreen To uch Panels Calibratio n Page This page (FIG. 76) allo ws you to calibrate the touch panel using a pre-selected touch driv er .  Press and hold the grey Front Setup Access bu tton (belo w the Modero LCD) for 6 seconds to access the Calibration page.  Press the cr osshairs to [...]

  • Page 122

    Firmwar e P ages a nd Descr iptio ns 100 7" Modero Widescreen To uch Panels G4 Web Cont rol Pa ge An on-board VNC (V irtual Network Computing) server allo ws the panel to connect to an y remote PC running a VNC client. Once connected, the client can view and control the panel remotely . The options on this page allo w you to enable/disable G4 [...]

  • Page 123

    Firmwar e P ages a nd Descr iptio ns 101 7" Modero Widescreen To uch Panels Refer to the Using G4 W eb Contr ol to Interact with a G4 P a nel sect ion on pa ge 50 for mo re det ail ed instructions on how to use the G4 W eb Control page with the ne w web-based NetLinx Security application. G4 Web Cont rol Page (Cont.) G4 Web Cont rol T imeout: [...]

  • Page 124

    Firmwar e P ages a nd Descr iptio ns 102 7" Modero Widescreen To uch Panels Sensor Set up The Sensor Setup page (FIG. 79) allows you to adjust the Light and Motion Sensor parameters on a Moder o touc h pan el. The elements of the Sensor Setup page are described in the table below: FIG. 7 9 Se nsor Setup page A light l evel value betw een the M[...]

  • Page 125

    Firmwar e P ages a nd Descr iptio ns 103 7" Modero Widescreen To uch Panels Sensor Setup Page Elements (Cont.) Ligh t Sensor : Allows you to monitor and alter the sensit ivity of the Modero panel light sensor: • The Light Sensor Level field indicates the level used to report the l ight sensor level ba ck to the NetLinx Master ( set in TPD4) [...]

  • Page 126

    Firmwar e P ages a nd Descr iptio ns 104 7" Modero Widescreen To uch Panels Making t he most of t he Autom ated Brigh tness Contr ol featur e (DIM Mode) Please follow the steps below to set up Automated Brightness Con trol: 1. Set the lighting conditions in the room to maximum (turn On all the lights). 2. Set the Maximum Panel Brightness, from[...]

  • Page 127

    Firmwar e P ages a nd Descr iptio ns 105 7" Modero Widescreen To uch Panels 9. Set th e Mi nimum brigh tness of th e Dimme r ( Dim Mode Max Le vel ) bel o w th e dete cted drop . This will make sure t hat the panel does not react to v ariations in the lighting conditions of a normal wor king en viro nmen t. Other Settings The Other Settings bu[...]

  • Page 128

    Firmwar e P ages a nd Descr iptio ns 106 7" Modero Widescreen To uch Panels Image Caching Page The Image Caching page (FIG. 81) co nfigures the allocation of memo ry for image caching. The G4 graphics engine caches images to decrease load tim e of pre v iously vie wed images. R AM caching is always enabled, and images (both static and dynamic)[...]

  • Page 129

    Firmwar e P ages a nd Descr iptio ns 107 7" Modero Widescreen To uch Panels Image Caching Page Elements Image Cache Settings: Allocates Flash memor y for image caching. Flash Cache Si ze Press the Up and Down arr ows to add and remove memory . Flash mem ory allocation cannot exceed the amount of Flash memory on the panel. Flash/RAM Cache Expir[...]

  • Page 130

    Firmwar e P ages a nd Descr iptio ns 108 7" Modero Widescreen To uch Panels Setting the image cache In the Pr o tected Setup page: 1. Press the Cache bu tton in the Pr otecte d Setup Naviga tion Bu tton s section. This opens the Image Cache page . 2. Set the cache expiration in the field Flash/RAM Cache Exp ir es . The Up and Down arrows in cr[...]

  • Page 131

    Firmwar e P ages a nd Descr iptio ns 109 7" Modero Widescreen To uch Panels The elements of the Password Setup page are described in the table belo w: SIP Setti ngs Page The options on the SIP Settings page (FIG. 83) enable you to establish network settings for using your touch panel as an IP phone. W ith a CSG SIP Communications Gateway ( FG [...]

  • Page 132

    Firmwar e P ages a nd Descr iptio ns 110 7" Modero Widescreen To uch Panels Features on this pag e include: SIP Settings Page Back: Saves all changes and returns to the previous page. Conn ecti on Status ic on: The icon in the upper-right corner of each S etup page shows online/offline stat e of the panel to the m aster . • Bright red - disc[...]

  • Page 133

    Firmwar e P ages a nd Descr iptio ns 111 7" Modero Widescreen To uch Panels Tools The T ools b utton provides a menu to select either the P anel Lo gs P age secti on on page 111, the Pa n e l Statistics P ag e sect ion o n page 112, or the Co nnection Utility P age se ction on pa ge 114. Sele ct an y of the options to access that page. Panel L[...]

  • Page 134

    Firmwar e P ages a nd Descr iptio ns 112 7" Modero Widescreen To uch Panels Features on this page include: Checking t he Panel Connectio n Logs 1. Press the T ools b utton in the Protected Setup Navigation Buttons section. This opens the To o l s menu. 2. W ithin the To o l s menu, press the Panel Logs button. All connection data is contained [...]

  • Page 135

    Firmwar e P ages a nd Descr iptio ns 113 7" Modero Widescreen To uch Panels Features on this page include: FIG. 8 6 Pa nel Statis tics pa ge Panel Statistics Page Back: Saves all changes and returns to the previous page. Conn ecti on Status ic on: The icon in the upper-right corner of each S etup page shows online /of fline state of the panel [...]

  • Page 136

    Firmwar e P ages a nd Descr iptio ns 114 7" Modero Widescreen To uch Panels Checking t he Panel Statisti cs 1. Press the T ools b utton in the Protected Setup Navigation Buttons section. This opens the To o l s menu. 2. W ithin the To o l s menu, press the Panel Statistics b utton. All connection statistics are contained on this page, e.g ., R[...]

  • Page 137

    Firmwar e P ages a nd Descr iptio ns 115 7" Modero Widescreen To uch Panels Features on this page include: Connection Utility Page Close: Closes the Connection Utility popup. Conn ecti on Status ic on: The icon in the upper-right corner of t he utility provides a const ant visual i indication of current connection status. A message is sent to [...]

  • Page 138

    Firmwar e P ages a nd Descr iptio ns 116 7" Modero Widescreen To uch Panels Using the Connectio n Utili ty 1. Press the T ools b utton in the Protected Setup Navigation Buttons section. This opens the To o l s menu. 2. W ithin the To o l s menu, press the Connection Utility button. This launches the Connection Utility pop- up wind ow . 3. Move[...]

  • Page 139

    EAP Security & Server Certificates 117 7" Modero Widescreen To uch Panels EAP Security & Server Certificates Overview The following EAP types all support a s erver certificate:  EAP-PEAP  EAP- TTLS  EAP- TLS All three of these certificate-using security methods are documented in the following sections. EAP Authentication goes [...]

  • Page 140

    EAP Se curit y & Se rver Cert ifi cat es 118 7" Modero Widescreen To uch Panels[...]

  • Page 141

    Full Duplex Intercom 119 7" Modero Widescreen To uch Panels Full Duplex Intercom Overview V oIP technology gi ves users the ability to instantly create a high-quality , digital home/off ice intercom network with no additional equipment required. By utilizing V oIP intercom, system integration is simple and calls sound incredibly clear . Incorp[...]

  • Page 142

    Full Dupl ex Interc om 120 7" Modero Widescreen To uch Panels Setting the In tercom Sessi on Time out 1. Select the Setup butto n on your int ercom pag e. 2. Press the up or do wn arro ws to increment the time out up by 1 second in each direction. If your call exceeds your session timeout the panel pro vides you with a popup (FIG. 90) to exten[...]

  • Page 143

    Full Duplex Intercom 121 7" Modero Widescreen To uch Panels Advanced Setup The intercom’ s advanced setup pages are accessed through the intercom setup pages. The adv anced pages allow y ou to set the panel intercom to be monitored, to monitor other intercom panels, and to name the panel. It is important to name the intercom panel; the name [...]

  • Page 144

    Full Dupl ex Interc om 122 7" Modero Widescreen To uch Panels 5. Press Back to return to the intercom setup pages. 6. Press Exit when you are fi nish ed. Allow ing a panel to mon itor 1. Select the Setup butto n on your int ercom pag e. 2. On the inte rcom s etup page, pre ss Advanced Setup . This launches the passwo rd numeric key pad. 3. Ent[...]

  • Page 145

    Full Duplex Intercom 123 7" Modero Widescreen To uch Panels Sample Intercom Page The mod ule f or dup le x inte rcom capable pane ls inc ludes user p ages. While you ca n crea te your o wn inter com di rect ory p age (see Cr eating Inter com P ag es section on page 126), it is possible to use the panel with the page belo w . FIG. 9 4 Sample In[...]

  • Page 146

    Full Dupl ex Interc om 124 7" Modero Widescreen To uch Panels Sample Intercom Page (Co nt.) No. Name Descript ion Channe l Po r t :C o d e Address Por t: Cod e Lev el Po r t : Co d e 7 Panel Directory Room Name The name of a panel i n the intercom directory . Y ou can call the panel, enact privacy against the panel and monitor the panel. 1:1 1[...]

  • Page 147

    Full Duplex Intercom 125 7" Modero Widescreen To uch Panels Answering an inco ming call The provid ed in terco m pag es inc lude an a nsw ering p opup window . Th e popu p page indic ate s the na me of the panel calling and two options:  Answer - Pressing this button opens the intercom sess ion with the other panel.  Ignore - Pressing th[...]

  • Page 148

    Full Dupl ex Interc om 126 7" Modero Widescreen To uch Panels Creating I ntercom P ages The easiest method of creating your own intercom pages is to start with the pages prov ided by AMX in the module do wnload .ZIP file. Y ou can change the aesthetics of the pages as long as the channel, address, le ve l and links remain untouched. For the mo[...]

  • Page 149

    Progra mming 127 7" Modero Widescreen To uch Panels Programming Overview Y ou can program the touch panel, using the commands in this section, to perform a wide v ariety of opera tions using Send _Comma nds and v aria ble te xt comman ds. A device must f irst be defined in the NetLinx programming language with values f or the Dev ice: Port: Sy[...]

  • Page 150

    Progra mming 128 7" Modero Widescreen To uch Panels Page Commands (C ont.) @CPG Clear all popup pages from specified popup group. Syntax: "'@CPG-<popup group name>'" V ariable: popup group name = 1 - 50 A SCII char acters. Name of the popup group. Example: SEND_COMMAND Panel,"'@CPG-Group1'" Clears [...]

  • Page 151

    Progra mming 129 7" Modero Widescreen To uch Panels Page Commands (C ont.) @PHT Set the hide effect time for the specified popup page. Syntax: "'@PHT-<popup page name>;<hide effect time>'" V ariable: popup page name = 1 - 50 ASCII characters. Name of the page t he popup is displa y ed On. hide eff ect time = Giv[...]

  • Page 152

    Progra mming 130 7" Modero Widescreen To uch Panels @PPK Kill a specific popup page from all pages. Kill refers to the deactivating (Off) of a po pup window from all pages. If the pop-up page is part of a group, the whole group is deact ivated. This comm and works in the same way as the 'Clear Group' command in TPDesign 4. Syntax: &q[...]

  • Page 153

    Progra mming 131 7" Modero Widescreen To uch Panels @PPX Close all popups on all pages. This command works in the same way as the 'Clear All' command in TPDesign 4. Syntax: "'@PPX'" Example: SEND_COMMAND Panel,"'@PPX'" Close all popups on all pages. @PSE Set the show ef fect for the specified p[...]

  • Page 154

    Progra mming 132 7" Modero Widescreen To uch Panels PPOF Deactivate a specific popup page on either a specified page or the current page. If the page name is empty , the current page is used (see example 2). If the popup page is part of a group, the whole group is deact ivated. This comm and works in the same way as the ’Hide Popup’ comman[...]

  • Page 155

    Progra mming 133 7" Modero Widescreen To uch Panels Programm ing Numbers The following information provides the programming numbers for colors, fonts, and borders. Colors can be used to set the colors on b uttons, sliders, and pages. The lowest color number represents the lightest color- specific disp lay; the highest number represents the dar[...]

  • Page 156

    Progra mming 134 7" Modero Widescreen To uch Panels RGB Values for a ll 88 Bas ic Colors (C ont.) Inde x No. Name R ed Gree n Blue 36 V ery Light Cyan 0 255 255 37 Light Cyan 0 223 22 3 38 Cyan 0 191 191 39 Medium Cyan 0 159 15 9 40 Dark Cyan 0 127 12 7 41 V ery Dark Cyan 0 95 95 42 V ery Light Aqua 0 128 255 43 Light Aqua 0 1 12 223 44 Aqua 0[...]

  • Page 157

    Progra mming 135 7" Modero Widescreen To uch Panels Font sty les and ID n umbers Font styles can be used to program the tex t fonts on bu ttons, sliders, and pages. The follo w ing chart sho ws the de faul t fo nt ty pe and t hei r resp ecti ve ID n umber s gene rated by T PDesi gn4. RGB Values for a ll 88 Bas ic Colors (C ont.) Inde x No. Nam[...]

  • Page 158

    Progra mming 136 7" Modero Widescreen To uch Panels Border styles and Pro grammi ng nu mbers Border styles can b e used to prog ram bo rder s on b utt ons, s liders, a nd pop up pag es. The TPD esign 4 T ouch Panel Des ign p rogram has pre -set bo rder s tyle s that a re user select able. Y ou cannot use the following number values for program[...]

  • Page 159

    Progra mming 137 7" Modero Widescreen To uch Panels TPD4 Border Styles by Name (C ont.) No. Bor der s tyles No. B or der sty les 43 Diam ond 85 85 Menu B ottom Rounded 65 44 Diam ond 95 86 Menu B ottom Rounded 75 45 Diam ond 105 87 Menu B ottom Rounded 85 46 Diam ond 1 1 5 88 Menu Bottom Rounded 95 47 Diam ond 125 89 Menu B ottom Rounded 105 4[...]

  • Page 160

    Progra mming 138 7" Modero Widescreen To uch Panels "^" Bu tton Comm ands These Button Commands are used in NetLinx Studio and are case insensitive. All commands that begin with " ^ " hav e the capability of assigning a v ariable tex t address range and button state range. A dev ice must first be defined in the NetLinx prog[...]

  • Page 161

    Progra mming 139 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^APF Add page flip action to a button if it d oes n ot already exist. Syntax: "'^APF-<vt addr range>,<page flip action>,<page name>'" V ariable: v ariable text address range = 1 - 4000. page flip action = Stan [dardP[...]

  • Page 162

    Progra mming 140 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BCB Set the bo rder colo r to the specified color . Only if the specified border co lor is not the same as the c urrent color . Note : Color can be assigned by color name ( without spaces), number or R,G ,B value (RRGGBB or RRGGBBAA). Syntax: "&apo[...]

  • Page 163

    Progra mming 141 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BDO Set the button draw order . Determines what order each layer of the button is drawn. Syntax: "'^BDO-<vt addr range>,<button states range>,<1-5><1-5><1-5><1- 5><1-5>'" V ariable: v ariable[...]

  • Page 164

    Progra mming 142 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BLN Set the number of lines removed equally from the top and bottom of a composite video signal. The maximum number of lines to remove is 240. A value of 0 will display the incoming video signal unaf fected. This command is used to scale non 4x3 video i[...]

  • Page 165

    Progra mming 143 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BMC (Cont.) Example 2: SEND_COMMAND Panel,"'^BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CT'" Copies the OFF s tate border , f ont, T ext, bitmap, icon, fill color an d text color of the button with a variable text address of 315 onto the O[...]

  • Page 166

    Progra mming 144 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BMF (Con t.) F or some o f these comma nds and values, ref er to theRGB V alues f or all 88 Bas ic Colors table on page 133. ’%CF<on fill color>’ = S et Fill Color . ’%CB<on border color>’ = Set Border Color . ’%CT<on te xt co l[...]

  • Page 167

    Progra mming 145 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BMI Set the button mask image. Mask image is used to crop a borderless butt on to a non-square shape. T his is typically used with a bit map. Syntax: "'^BMI-<vt addr range>,<button states range>,<mask image>'" V ari[...]

  • Page 168

    Progra mming 146 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BNN Set the T akeNote network name for the specified Addresses. Syntax: "'^BNN-<vt addr range>,<network name>'" V ariable: v ariable text address range = 1 - 4000. network name = Use a v alid IP Address. Example: SEND_COM[...]

  • Page 169

    Progra mming 147 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BOR Set a border to a specific border style associated with a border value for those buttons with a defined address range. Refer to theBorder S tyles and Programming Numbers table on page 136 for more information. Syntax: "'^BOR-<vt addr ra[...]

  • Page 170

    Progra mming 148 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BRD Set the border of a button state/ states. Only if the specified border is not the same as the current bo rder . T he border names are available through the TPDesi gn4 border-name drop-down list. Syntax: "'^BRD-<vt addr range>,<but[...]

  • Page 171

    Progra mming 149 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BSP Set the button size and position. Set the button size and i ts position on the p age. Syntax: "'^BSP-<vt addr range>,<left>,<top>,<right>,<bottom>'" V ariable: v ariable text address range = 1 - 4000[...]

  • Page 172

    Progra mming 150 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^BWW Set the button word wrap feature to those buttons with a defined address range. By default, word-wrap is Off. Syntax: "'^BWW-<vt addr range>,<button states range>,<word wrap>'" V ariable: v ariable text address [...]

  • Page 173

    Progra mming 151 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^FON Set a fon t to a specific Font ID value for those buttons with a defined address range. Font ID numbers ar e generated by the TPDesign4 programmers report. Syntax: "'^FON-<vt addr range>,<button states range>,<font value>[...]

  • Page 174

    Progra mming 152 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^GLH Change the bargraph upper limit. Syntax: "'^GLH-<vt addr range>,<bargraph hi>'" V ariable: v ariable text address range = 1 - 4000. bargraph limit range = 1 - 65535 ( bargraph upper limit range ). Example: SEND_COMMAN[...]

  • Page 175

    Progra mming 153 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^GSN Change the bargraph slider name or joystick cursor name. Slider names and cursor names can be found in the TPDesign4 slider name and cursor drop-down list. Syntax: "'^GSN-<vt addr range>,<bargraph slider name>'" V ari[...]

  • Page 176

    Progra mming 154 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^ICO Set the icon to a button. Syntax: "'^ICO-<vt addr range>,<button states range>,<icon index>'" V ariable: v ariable text address range = 1 - 4000. button stat es range = 1 - 256 f or multi-state b uttons (0 = All[...]

  • Page 177

    Progra mming 155 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^JST Set text alignment using a numeric keypad layout for those buttons with a defined address range. The alignment of 0 is f ollowed by ',<lef t>,<t op>'. The l eft and t op coordinates are relative to the upper lef t corner of the[...]

  • Page 178

    Progra mming 156 7" Modero Widescreen To uch Panels "^" Button Commands ( Cont.) ^TEC Set the tex t eff ect color for the specified addresses/states to the specified color . The T ext Effect is specified by name a nd can be found in TPD4. Y ou can also assign t he color by name or RGB v alue (RRGGBB o r RRGGB BAA). Syntax: "&apo[...]

  • Page 179

    Progra mming 157 7" Modero Widescreen To uch Panels Text Effects Names The following is a listing of tex t ef fects names (associated with the ^TEF com mand o n pa ge 156 ). "^" Button Commands ( Cont.) ^UNI Set Unicode text . For the ^UNI command (%UN and ^BMF command), the Unicode text is sent as ASCII-HEX nibbles. Syntax: "&a[...]

  • Page 180

    Progra mming 158 7" Modero Widescreen To uch Panels Button Query Commands Button Query commands reply back with a custom ev ent. There will be one custom e vent for each button/state co mbination. Each query is assigned a unique custom e v ent type. The f o llowing example is f or debug purposes only: NetLinx Example: CUSTOM_EVENT[device, Addr[...]

  • Page 181

    Progra mming 159 7" Modero Widescreen To uch Panels These fields are populated dif ferently for each query command. The text length (String Encode) field is not used in any co mmand. Button Query Commands ?BCB Get the current border color . Syntax: "'?BCB-<vt addr range>,<button states range>'" V ariable: v aria[...]

  • Page 182

    Progra mming 160 7" Modero Widescreen To uch Panels Button Query Commands (Co nt.) ?BCF Get the current fill color . Syntax: "'?BCF-<vt addr range>,<button states range>'" V ariable: v ariable text address range = 1 - 4000. button stat es range = 1 - 256 f or multi-state b uttons (0 = All stat es, f or General b[...]

  • Page 183

    Progra mming 161 7" Modero Widescreen To uch Panels Button Query Commands (Co nt.) ?BMP Get the current bitmap name. Syntax: "'?BMP-<vt addr range>,<button states range>'" V ariable: v ariable text address range = 1 - 4000. button stat es range = 1 - 256 f o r multi-state buttons (0 = All states, f or General b [...]

  • Page 184

    Progra mming 162 7" Modero Widescreen To uch Panels Button Query Commands (Co nt.) ?BRD Get the current border name. Syntax: "'?BRD-<vt addr range>,<button states range>'" V ariable: v ariable text address range = 1 - 4000. button stat es range = 1 - 256 f or multi-state b uttons (0 = All stat es, f or General b[...]

  • Page 185

    Progra mming 163 7" Modero Widescreen To uch Panels Button Query Commands (Co nt.) ?FON Get the current font index. Syntax: "'?FON-<vt addr range>,<button states range>'" V ariable: v ariable text address range = 1 - 4000. button stat es range = 1 - 256 f o r multi-state buttons (0 = All states, f or General b u[...]

  • Page 186

    Progra mming 164 7" Modero Widescreen To uch Panels Button Query Commands (Co nt.) ?JSB Get the current bitmap justificat ion. Syntax: "'?JSB-<vt addr range>,<button states range>'" V ariable: v ariable text address range = 1 - 4000. button stat es range = 1 - 256 f or multi-state b uttons (0 = All stat es, f or[...]

  • Page 187

    Progra mming 165 7" Modero Widescreen To uch Panels Button Query Commands (Co nt.) ?JST Get the current text justific ation. Syntax: "'?JST-<vt addr range>,<button states range>'" V ariable: v ariable text address range = 1 - 4000. button stat es range = 1 - 256 f o r multi-state buttons (0 = All states, f or Ge[...]

  • Page 188

    Progra mming 166 7" Modero Widescreen To uch Panels Button Query Commands (Co nt.) ?TEF Get the current text effect name. Syntax: "'?TEF-<vt addr range>,<button states range>'" V ariable: v ariable text address range = 1 - 4000. button stat es range = 1 - 256 f or multi-state b uttons (0 = All stat es, f or Gene[...]

  • Page 189

    Progra mming 167 7" Modero Widescreen To uch Panels Panel Runtime Operations Serial Commands are used in the AxcessX T erminal Emulato r mode. These commands are case insensiti ve. Panel Runtime Operation Command s ABEEP Output a single beep even if beep is Off. Syntax: "'ABEEP'" Example: SEND COMMAND Panel,"'ABEE[...]

  • Page 190

    Progra mming 168 7" Modero Widescreen To uch Panels Panel Runtime Operation Command s (Cont.) @AKP Pop up the keypad icon and initialize the text string to that specified. Keypad string is se t to null on power up and is s tored until power is lost. The Prom pt T ext is optional. Syntax: "'@AKP-<initial text>;<prompt text>[...]

  • Page 191

    Progra mming 169 7" Modero Widescreen To uch Panels Panel Runtime Operation Command s (Cont.) @EKP Extend the Keypad. Pops up the keypad icon and initializes the text string to that spe cified. The Prompt T ext is optional. Syntax: "'@EKP-<initial text>;<prompt text>'" V ariables: initial text = 1 - 50 ASCII cha[...]

  • Page 192

    Progra mming 170 7" Modero Widescreen To uch Panels Panel Runtime Operation Command s (Cont.) @SOU Play a sound file. Syntax: "'@SOU-<sound name>'" V ariables: sound name = Name of the sound file. Supported sound file formats are: WAV & MP3. Example: SEND COMMAND Panel,"'@SOU-Music.wav'" Plays [...]

  • Page 193

    Progra mming 171 7" Modero Widescreen To uch Panels Panel Runtime Operation Command s (Cont.) TP AGEON T urn On p age tracking. This command turns On page tracking, whereby when the page or popup s change, a string is sent to the Master . This string may be captured with a CREA TE_BUFFER command for one panel and sent directly to another panel[...]

  • Page 194

    Progra mming 172 7" Modero Widescreen To uch Panels Inpu t Com mands These Send Commands are case insensitiv e. Input Commands ^CAL Put panel in calibration mode. Syntax: "'^CAL'" Example: SEND COMMAND Panel,"'^CAL'" Puts the p anel in calibration mode. ^KPS Set the keyboard passthru. Syntax: "&apos[...]

  • Page 195

    Progra mming 173 7" Modero Widescreen To uch Panels Input Commands ^MPS Set mouse pass through. Allows mouse input to mul tip le destinations simultaneously . Destinations are comma delimited. Note: This command causes all mice connected to the G4 product and any mice on a computer connected via a VGA card with USB output to reset to position [...]

  • Page 196

    Progra mming 174 7" Modero Widescreen To uch Panels Embedded code s The following is a list of G4 compatible embedded codes: Embedded Codes Decima l num ber s Hexidecim al value s V ir t ual keystro ke 8 ($08) B ackspace 13 ($0D) E nter 27 ($1B) ESC 128 ($80) CTRL key down 129 ($81) AL T key down 130 ($82) Shift key down 131 ($83) F 1 132 ($84[...]

  • Page 197

    Progra mming 175 7" Modero Widescreen To uch Panels Panel Setup Commands These commands are case insensitiv e. Panel Setup Commands CLOCK Sets the t ime and date on the p anel. Syntax: “’CLOCK mm-dd-yy hh:mm:ss’” V ariables: mm = Month dd = Day yy = Y ear hh = Hour mm = Minute ss = Second Example: SEND_COMMAND Panel, “’CLOCK 04-19-[...]

  • Page 198

    Progra mming 176 7" Modero Widescreen To uch Panels Panel Setup Commands ^CFSM Sets the Flash cache to t he maxi mum available size allowed for backup Flash cache. (determined by taking 75% of f ree Flash space) Syntax: “’^CFSM’” V ariable: There is no parameter f or this comm and. Example: SEND_COMMAND Panel, “’^CFSM’” Modifie[...]

  • Page 199

    Progra mming 177 7" Modero Widescreen To uch Panels Panel Setup Commands ^PWD Set the page flip pass wo rd . Password level is required and m ust be 1 - 4. Syntax: "'^PWD-<password level>,<page flip password>'" V ariables: password level = 1 - 4. page flip pass word = 1 - 50 ASCII characters. Example: SEND COMMA[...]

  • Page 200

    Progra mming 178 7" Modero Widescreen To uch Panels Dynamic Image Commands The following is a listing and descriptions of Dynamic Image Commands. Dynamic Image Commands ^BBR Set the bitmap of a button to use a particular resource. Syntax: "'^BBR-<vt addr range>,<button states range>,<resource name>'" V ari[...]

  • Page 201

    Progra mming 179 7" Modero Widescreen To uch Panels Dynamic Image Comm ands (Cont.) ^RAF Add new resources. Adds any and all resour ce parameters by sending embedded cod es and data. Syntax: "'^RAF-<resource name>,<data>'" V ariable: resource name = 1 - 50 AS CII characters. data = Refers to the embedded codes, [...]

  • Page 202

    Progra mming 180 7" Modero Widescreen To uch Panels Panel Interc om Comm ands The following is a listing and descriptions of panel intercom commands. Panel Intercom Commands ^ICE Ends an intercom call. Syntax: "'^ICE'" Example: SEND_COMMAND Panel,"'^ICE'" Ends a call. ^ICM Modifies an intercom call. For [...]

  • Page 203

    Progra mming 181 7" Modero Widescreen To uch Panels SIP Commands The following table lists an d describes SIP commands that are generated from the touch panel. SIP Commands ^PHN- A UT O ANSWER Provides the state of the auto-answer feature. Syntax: "'^PHN-AUTOANSWER, <state>'" V ariable: state = 0 or 1 (off or on) Exam[...]

  • Page 204

    Progra mming 182 7" Modero Widescreen To uch Panels The following table lists an d describes SIP commands that are sent to the touch panel to manage calls. SIP Commands (Cont.) ^PHN-PRIV A CY Indicates the state of the privacy feature. Syntax: "'^PHN-PRIVACY, <state>'" V ariable: state = 0 or 1 (1 i ndicates new messa[...]

  • Page 205

    Progra mming 183 7" Modero Widescreen To uch Panels SIP Commands (Cont.) ^PHN-DTMF Sends DTMF codes. Syntax: "’?PHN-DTMF, <DTMF code>’" V ariable: DTMF code = 0, 1, 2, 3, 4 , 5, 6, 7, 8, 9, #, or *. Example: SEND_COMMAND Panel,"'?PHN-DTMF, 1234567879*'" ^PHN-HANGUP Hangs up the call. Syntax: "’?PH[...]

  • Page 206

    Progra mming 184 7" Modero Widescreen To uch Panels[...]

  • Page 207

    Appendix A: Text Formatting 185 7" Modero Widescreen To uch Panels Appendix A: Text Formattin g Text Format ting C odes for Bar graphs /Joyst icks T ext formatting codes for bargraphs pro vide a mechanism to allo w a portion of a bar graphs text to be dynamically provided information about the cu rrent status of the level (multistate and tradi[...]

  • Page 208

    Appendix A: Text Formatti ng 186 7" Modero Widescreen To uch Panels Text Area Input Mask ing T ext Area Input Masking can be used to limit th e allo wed/correct characters that are entered into a text area. For e xample, in working with a zip code, a user could limit the entry to a max length of only 5 characters but, with input masking, you c[...]

  • Page 209

    Appendix A: Text Formatting 187 7" Modero Widescreen To uch Panels Refer to the following Send Commands for more detailed information: Input m ask range s These ranges allow a user to specify the minimum and maximum numer ic v alue for a field. Only one range is allo wed per f ield. Using a range implie s a nu meric entry ONL Y . An example fr[...]

  • Page 210

    Appendix A: Text Formatti ng 188 7" Modero Widescreen To uch Panels A keyboard entry using norm al text entry is straightfo rward. Ho we ver , once an input mask is applied, the behavior of the k eyboard needs to change to accommodate the input mask's requirement. When working with masks, an y literal characters in the mask will be "[...]

  • Page 211

    Appendix A: Text Formatting 189 7" Modero Widescreen To uch Panels URL Resources A URL ca n be br oken int o several part s. For exam ple: th e URL http ://ww w .amx.co m/c ompany -info - home.as p . This U RL indicat es t hat th e prot ocol in us e is http (Hyp erT ext Transp ort Pro toco l) and t hat the information resides on a host machine[...]

  • Page 212

    Appendix A: Text Formatti ng 190 7" Modero Widescreen To uch Panels[...]

  • Page 213

    Appendix B - Wireless Technology 191 Modero Touch Panels Appendix B - Wireless Techn ology Overview of Wireless Technology  802.11b /2.4 GH z and 802.1 1a/5 G Hz are the two major WLAN standards and both operate using radio frequency (RF) technology . T ogether the two standards are together called W i-Fi and o perat e in fr equenc y bands o f 2[...]

  • Page 214

    Appendix B - Wireless Technology 192 Modero Touch Panels Although the calculations required to encrypt data with WEP can impact the performance of your wirele ss net work, it's ge neral ly see n onl y when ru nnin g benc hma rks, and not l arge enoug h to b e not iceabl e in the co urse of norma l net wor k usage . Terminology  802.1x  I[...]

  • Page 215

    Appendix B - Wireless Technology 193 Modero Touch Panels  TKIP  Short for T emp oral K ey Inte gration, is part of the IEEE 80 2.11i encryption stand ard for wireless L ANs. TKIP pro vides per -p ack et ke y mixing, m essage inte grity check and re-keying mechanism, thus ensuring e very data packet is sent with its o wn unique encryption ke y[...]

  • Page 216

    Appendix B - Wireless Technology 194 Modero Touch Panels  WP A2  Also kno w as IEEE 802.1 1i, is an amendm ent to the 802.11 standard specifyin g security mechan isms for wireless ne tworks. The 80 2.11i scheme mak es use of the Adv anced Encr yption Standard (AES) b lock cipher; WEP and WP A u se the RC4 stream cipher .  The 802.11i archi[...]

  • Page 217

    Appendix B - Wireless Technology 195 Modero Touch Panels EAP Authentication EAP (Extensible Authentication Protocol) is an Enterp rise authentication protocol that can be used in both a w ire d and wi rele ss net work environme nt. EAP requ ires the us e of an 802.1 x Aut henti catio n Server , also known as a Radius serv er . Although there are cu[...]

  • Page 218

    Appendix B - Wireless Technology 196 Modero Touch Panels EAP communicati on overview EAP Authentication goes a step beyond just encrypting data transfers, b ut also requires that a set of credentials be validated before the client (panel) is allo wed to connect to the rest of the network (FIG. 98). Belo w is a description of th is process. It is im[...]

  • Page 219

    Appendix B - Wireless Technology 197 Modero Touch Panels AMX Cer tificate Up load Uti lity The Certificate Upload utility gi v es you the ability to compile a list o f tar get touch panels, select a pre- obtained certificate (uniquely identifying the panel), and then upload that f ile to the selected panel. This application ensures that a unique ce[...]

  • Page 220

    Appendix B - Wireless Technology 198 Modero Touch Panels Step 2: Co nfirm the Insta llation of t he USB Dr iver on the PC The first time each AMX touch pan el is connected to th e PC it is detected as a new hardware de vice and the USBLAN dri ver becomes associated with it (panel specif ic). Each time thereafter the panel is "recognized" [...]

  • Page 221

    Appendix B - Wireless Technology 199 Modero Touch Panels 10. Launch the Certificate Upload Utility and conf irm the utility has detected the ne w USB connection to the panel:  Click on the Local Address field's d rop-down arr ow .  Confirm the ne w USB entry sho ws u p in the list as: 10.XX.XX.1 . How to Uploa d a C erti ficat e Fil e 1.[...]

  • Page 222

    Appendix B - Wireless Technology 200 Modero Touch Panels 12. Select the target de v ices which be uploaded with the selected certificate. These can either be:  individually selected by toggling the box ne xt to the Send entry (with the T ype column).  selected as a group by clicking on the Check All radio box located at the top of the de vice[...]

  • Page 223

    Appendix B - Wireless Technology 201 Modero Touch Panels[...]

  • Page 224

    Appendix B - Wireless Technology 202 Modero Touch Panels[...]

  • Page 225

    Appendix C: Troubleshooting 203 7" Modero Widescreen To uch Panels Appendix C: Troubleshooting This section describes the solutions to possible hardware/f irmware issues that could arise during the commo n oper ati on of a Mo dero to uch panel. Troubleshooting Information Symp tom Sol ution My USB drivers has a yellow exclamation point and doe[...]

  • Page 226

    Appendix C: Troubleshooting 204 7" Modero Widescreen To uch Panels Troubleshooti ng Information (C ont.) Symp tom Sol ution My Moder o p anel is n’t appe aring in my Workspace window . • V erify that the System number is the same on both the NetLinx Workspace window and the System Settings page on the Modero panel. • V erify you hav e en[...]

  • Page 227

    Appendix C: Troubleshooting 205 7" Modero Widescreen To uch Panels Troubleshooting Information (Cont.) Symp tom Sol ution My Co nnec tio n Status but ton is n’t blinking and it says the USB is connecting. "USB Connecting" is displayed when the panel is trying to establish USB comm unication with the PC (either within the N etLinx S[...]

  • Page 228

    Appendix C: Troubleshooting 206 7" Modero Widescreen To uch Panels Troubleshooti ng Information (C ont.) Symp tom Sol ution My WEP doesn’t seem to be working. • WEP will not work unl ess the same default k ey is set on both the panel and the Access Point. • For example: if you had your access point set to default key 4 (which was 01:02:0[...]

  • Page 229

    Appendix C: Troubleshooting 207 7" Modero Widescreen To uch Panels Troubleshooting Information (Cont.) Symp tom Sol ution I have more that one Mo dero panel connected to my System Master and only one s hows up. Multiple NetLinx Compati ble devic es (such as Modero panels) can be associated for use with a single M aster . Each Modero panel come[...]

  • Page 230

    Appendix C: Troubleshooting 208 7" Modero Widescreen To uch Panels[...]

  • Page 231

    Appendix 209 7" Modero Widescreen Touch Panels[...]

  • Page 232

    10/08 © 2008 AMX . All rights reserved. A MX and the AMX logo are registered trad emarks of AMX . AMX reserves the right to alter spec ific ations without notice at any time. It’s Y ou r Wo rld - Ta ke Con trol ™ 3000 RESEARCH DR IVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical s u[...]