Axis Q6045-S Mk II manual

AXIS Q6045–S Mk II PTZ Dome Network Camera User Manual[...]

About this Document This manual is intended for administrators and users of the AXIS Q6045 - S Mk II PTZ Dome Network Camera, and is applicable to rmware 5.55 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or[...]

Safety This product complies with IEC/EN/UL 60950-1 and IEC/EN/UL 60950-22, Safety of Information Technology Equipment. The product shall be grounded either through a shielded network cable (STP) or other appropriate method. The power supply used with this product shall fulll the requirements for Safety Extra Low Voltage (SELV) and Limited P owe[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera T able of Contents Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1 Symptoms, P ossible Causes and Remedial Actions . . . . . . . . . . . . . . . . . . . . . 62 Technical Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Hardware Overview Hardware Overview 2 1 3 4 5 6 7 8 9 10 1 1 1 Mounting hole for sunshield (3x) 2 Pressure relief valve 3 Multiconnector 4 Hook for safety wire 5 Guide hole 6 Inlet valve 7 Mounting hole (3x) 8 P art number (P/N) & Serial number (S/N) 9 SD card slot (SDHC) 1 0 Status LED indicator 1 1[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Hardware Overview 5. Keep the gas owing through the camera housing for one minute before removing the chuck from the inlet valve. 6. Lift the pressure relief valve to let the overpressure out of the camera unit. 7. Repeat the lling process a total of 3 times, leaving the the camera pressurized the [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Hardware Overview LED Indicators LED Color Indication Unlit Connection and normal operation Amber Steady during startup. Flashes during rmware upgrade. Amber/red Flashes amber/red if network connection is unavailable or lost. Red Flashes red for rmware upgrade failure. Status Green Shows steady gre[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Hardware Overview NO NO NO TICE TICE TICE The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specic use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions.[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Hardware Overview 1 Dip switch position Description Default (middle) B Remove VLAN tags from forwarded multicast packages. Use this setting when connecting to the network, directly or through a router or network switch. Left A Block multicast packages that have a VLAN tag. Use this setting when connectin[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operati[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Access the Product The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings on page 58 . To set the password via a standard HTTP connection, enter it dire[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Access the Product 3. From the Trigger drop-down list, select Input Signal . 4. From the second drop-down list, select Manual T rigger . 5. Select the desired action and congure the other settings as required. For more information about action rules, see Events on page 40 . To show the manual trigger [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Access the Product P an and Tilt bars – Use the arrows to pan and tilt the camera view , or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position. Focus bar – Use the arrows [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream prole[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Media Streams The AMC Control Panel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows C[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 17[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. T o open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have a[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 19 . • Stream proles. See page 20 . • Camera settings. See page 2 1 . • Overlay image. See page 22 . • Privacy mask. See page 24 . Video Stream Y ou can dene the following [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Video H.264 H.264, also known as MPEG-4 Part 1 0/AVC, is a video compression standard that provides high quality video streams at low bit rates. An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whereas P-frames only contain the diff[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Video Camera Settings The Video > Camera Settings page provides access to advanced image settings for the Axis product. Image Appearance Increasing the Color level increases the color saturation. The value 1 00 gives maximum color saturation. The value 0 gives a black and white image. The image Bright[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Video infrared light. The image is shown in black and white when the IR cut lter is off. Set the IR cut lter to Auto to automatically switch between On and Off according to the lighting conditions. Day/Night shift priority - Use the Day/Night shift priority bar to determine when the camera shifts i[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Video Overlay Image An overlay image is a static image superimposed over the video stream. The image, for example a company logo, is used to provide extra information or to mask a part of the image. Since it is static, the position and size of an overlay image will remain the same regardless of resolutio[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Video 2. Under Overlay Settings , select Include text . 3. Enter the modier #D and, optionally , additional text which will be displayed also when the action rule is not active. Create the action rule: 1. Go to Events > Action Rules 2. Click Add to create a new rule. 3. Select a Trigger and, option[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 20 . • Default Viewer for Browser . See page 25 . • Viewer Se[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recor[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) PTZ (Pan Tilt Zoom) Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic position. A preset position consists of the following values: • P an and tilt positions • Zoom position • Focus position (manual or automatic) •[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) The product can be mounted in three different horizontal directions. This may cause the view from P an 0° to be changed from the original view . Click Set new P an 0° to set the pan coordinate system to zero in the current direction. Set new Pan 0° can be useful for instance when [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) 3. Click Save . 90° - 90° - 180°/180° 0° 90° - 90° - 180°/180° 0° A B B A 1 2 Top view A P an limit start B Pan limit end Guard T our A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and for congura[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) To add a recorded tour: 1. Go to PTZ > Guard Tour and click Add . 2. Select Create a record tour and click OK . 3. Enter a descriptive name. 4. Specify the pause length between runs. 5. Click to start recording the P an/Tilt/Zoom movements. 6. When satised, click . 7. Click OK [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) x Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed. When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the came[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) Control Queue The administrator can set up a queue for PTZ controllers from PTZ > Control Queue . Once set up, the PTZ Control Queue buttons appear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue. A user[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Detectors Detectors Shock Detection Enable Shock Detection from the Detectors menu. Shock detection is used, for example, to generate an alarm if the product is hit by an object. Use the Shock sensitivity slider to adjust the sensitivity level at which the product should send an alarm upon being hit. Low[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Detectors P arameter Object Size History Sensitivity Description Object size relative to window size. Object memory length. Difference in luminance between background and object. High level (1 00%) Only very large objects trigger motion detection. An object that appears in the window triggers motion dete[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Detectors 1. Choose Area of interest from the drop-down list. Set the virtual area to detect if an object has disappeared from this area of interest. Important When conguring Object size the view shall be zoomed out to Wide position. 2. Choose Object size from the drop-down list. Set the size limits o[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Detectors 3. Use the Sensitivity slidebar to dene how sensitive the detection should be. The lower sensitivity selected on the Sensitivity bar , the greater difference in luminance is needed between the object and the background for the detector to be activated. See the online help for more informatio[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Detectors 2. Choose Object size from the drop-down list. Set the size limits of the object that should be detected. The camera will detect any object whose size falls in between the minimum (blue shape) and maximum (white shape) range. 3. Use the Sensitivity slidebar to dene how sensitive the detectio[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available app[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 39[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Events - Live Stream Accessed – T rigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notications. - Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page 33 . - Shock Detected – Trigger the rule w[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Events - Recurrence – T rigger the rule periodically . See Set Up Recurrences on page 44 . This can for example be used to upload an image every 5 minutes. - Use Schedule – T rigger the rule according to the selected schedule. See Create Schedules on page 43 . Actions Available actions include: • D[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Events FTP Send Images Send Video Clip HTTP Send Images Send Notication Send Video Clip HTTPS Send Images Send Notication Send Video Clip Encrypted le transfer using HyperText Transfer Protocol Secure (HTTPS). Specify login information for the HTTPS server and validate the server’s certicat[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Events 2. Enter a descriptive name and the information needed for a daily , weekly , monthly or yearly schedule. 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page. Set Up Recurrences Recurrences are used to trigger acti[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 45 . • To set up action rules, see page 40 . • To access recordings, see Recording List on page 45 . • To congure camera controlled[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Lang[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means t[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product v[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1. Create a self-signed certicate as described abo[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP . The IPv4 settings are congured under System Options > Network > T CP/IP > Basic . DHCP (Dynamic Host Conguration Protocol) allows [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar . 6. Open a browser and type http://<IP address> in the Location/Address eld. For other methods of assigning the IP address, see the Installation and Management Software CD or the do[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options NTP Conguration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are congured under System Options > Network > T CP/IP > Advanced . Select Obtain NTP server address via DHCP to use the NTP settings provided by the D[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the eld. If no router is specied, the product automatically searches for NA T routers on your network. If more than one router is found, the default router[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options Note If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled. Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the T r[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 1 0. The following SD card le systems are supported: • ext4 — recommended due to its resilience against data loss if the card is ejected or if th[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options Network Share Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www .axis.com/products/cam_companio[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options • the default router • the subnet mask • the system time • the IEEE 80 2.1X settings • uploaded applications are kept but must be restarted Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The A[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. NO NO NO TICE TICE TICE Improper use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use this function unless you understand the c[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Multi-Connector Cable Multi-Connector Cable Note The supplied multi-connector cable is required in order to maintain the camera’s NEMA/IP rating. The multi-connector cable is connected to the camera’s multi-connector , see Hardware Overview on page 6 . The wires are connected to the supplied media co[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Multi-Connector Cable RX+ 3 – green/white Ethernet – receiving RX- 4 – green Ethernet – receiving TX+ 5 – orange/white Ethernet – transmitting TX- 6 – orange Ethernet – transmitting 0 V DC (-) 8 – black 0 V DC DC output (12 V) 1, 9 – red Used to power camera 12–13.2 V DC 60[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Symptoms, P ossible Causes and Remedial Actions Problems setting the IP address When using ARP/P[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur . T o identify the source of the problem, check the System Log under System Options > Support &g[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS Q6045-S Mk II 50 Hz AXIS Q6045-S Mk II 60 Hz Image sensor 1/3” Progressive Scan CMOS Lens f 4.44 – 142.6 mm F1.6 – 4.4 1 Autofocus Automatic day/night Horizontal angle of view: 62.98° – 3.49° V[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform; specications at www .axis.com AXIS Video Hosting System (AVHS) with One-Click Camera Connection ONVIF Prole S, [...]

AXIS Q6045–S Mk II PTZ Dome Network Camera T echnical Specifications Function/group Item Specications IEC/EN 60529 IP66, IP67, IP6K9K, NEMA 250 Type 4X IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-60, MIL-STD 8 10G 509.5 Weight Camera: 5.7 kg (12.6 lb .) Included acce[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera T echnical Specifications Network connector Two 2-pin Ethernet terminal blocks. I/O terminal connector 2-pin terminal block. External Connectors Ground Screw Ground screw for connecting the media converter switch to earth ground. Make sure that both ends of the grounding wire are in contact with their r[...]

AXIS Q6045–S Mk II PTZ Dome Network Camera T echnical Specifications P erformance Considerations When setting up your system, it is important to consider how various settings and situations will affect performance. Some factors affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both. If the [...]

User Manual V er . M2.9 AXIS Q6045–S Mk II PTZ Dome Network Camera Date: January 20 15 © Axis Communications AB, 2015 P art No. 590 1 0[...]