BenQ MW853UST manual

MX852UST/MW853UST Digital Pr ojector User Manual[...]

Table of contents 2 Ta b l e o f c o n t e n t s Important safety instructions ................... 3 Introduction .................. 7 Projector featu res .... ................... .............. 7 Shipping content s ..... ....................... .......... 8 Projector exte rior view.... ..................... .. 9 Controls and fu nctions ..... .....[...]

Important safety instructions 3 Impor tant safety instructions Y our projector is designed and tested to meet the latest st andards f or safety of information technology equipment. Howev er , to ensure saf e use of this product, it is important that you follow the instructions mentioned in th is manual and mark ed on the product. Safety Instruction[...]

Important safety instruc tions 4 Safety Instructions (Contin ued) 6. The lamp becomes extr emely hot during operation. Allow the projector to cool for appr oximately 45 minutes prior to r emoving the lamp assembly f or replacement. 7. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond the rated life could cause the[...]

Important safety instructions 5 Safety Instructions (Continu ed) 12. Do not place this projector in an y of the following environments. - Space that is poorly v entilated or confined. Allow at least 50 cm clearance from walls and free flow of air ar ound the projector . - Locations where temperatur es ma y become excessively high, such as the insid[...]

Important safety instruc tions 6 Safety In structions (Con tinued) 16. Do not step on the projector or place any objects upon it. Besides pr obable ph ysical dama ge to the pr ojector , doing so ma y result in accident s and possible injury . 17. Do not place liquids near or on the projector . Liquids spilled into the projector ma y cause it to fai[...]

Introductio n 7 Intr oduction Pr ojector featur es The pr ojector offers the f ollowing feat ures • SmartEco™ star t s your dynamic po wer sa ving The SmartEco™ technology offers a new wa y of operating the pr ojector lamp syst em and sa ves lamp po wer up to 30% depend ing on the content brightness leve l. • Longer lamp life with SmartEco?[...]

Introduction 8 Shipping contents Carefull y unpack and verif y that you ha ve all of the items shown below . If any of these items are missing, please contact y our place of purchase. Standar d accessories The supp lied accessories w ill be suitable fo r y our region, and may differ fr om those illustrated. Optional accessories *The warranty card i[...]

Introductio n 9 Pr ojector exterior view 1. PointWriter dumm y cove r (PointWriter kit) 2. Mirr or 3. Lamp compartment cover 4. Focus ring 5. External control panel (See "Projector" on page 11 for details.) 6. V ent (cool air intake) 7. Projection lens 8. Fr ont adjuster foot 9. Fr ont IR remote sensor 10. COMPUTRR-2 input jack 11. COMPUT[...]

Introduction 10 26. W all mount plate Bottom side 26 17 17 22[...]

Introductio n 11 Contr ols and functions Pr ojector 7. PO WER indicator light Lights up or flashes when the pr ojector is under operation. See "Indicators" on page 60 for details. 8. AUT O Automati cally deter mines the best picture timings f or the display ed image . See "Auto-adjusting the image" on page 24 for d etail s. 9. ?[...]

Introduction 12 Remote Contr ol 1. ON / OFF T oggles the pr ojector between standby mode and on. 2. Source s election buttons Selects an input source for displa y . 3. K eystone/Ar ro w k eys ( / ▲ Up , / ▼ Do wn) Manually corr ects distorted images resulting from an angled pr ojection. 4. MENU/EXI T T urns on the On-Screen Displa y (OSD) menu.[...]

Introductio n 13 20. MUTE T oggles pr ojector audio between on and off. 21. SMAR T ECO Switch the lamp mode between Eco/ Normal and SmartEco . 22. QUICK INST ALL (" TEST " is for Japan r egion) Displa ys the Quick Install OSD menu. Operating the LASER pointer The Laser Pointer is a presentation aid for prof essional s. It emits a beam of [...]

Introduction 14 Remote contr ol effective rang e Infra-Red (IR) r emote control sensor is located on the front of the pr ojector . The remote contr ol must be held at an angle within 30 degr ees perpendicular to the projector's IR remote contr ol sensor to function corr ectly . The distance between the remote contr ol and the sensor should not[...]

Introductio n 15 Replacing the remote contr ol batter y 1. T o open the battery cov er , turn the remote contr ol ove r to view its back, push on the finger grip on the cover and slide it up in the direction of the arrow as illustrated. The cover will slide off. 2. Remove any existing batteries (i f necessar y) and install two AAA batteries obser v[...]

Positionin g your projector 16 P ositioning y our pr ojector Choosing a location Y our projector is designed to be installed in one of f our possible installat ion locations: Y our room la yout or personal prefer ence will dictate which installa tion location y ou select. T ake into consideration the size and position of y our screen, the lo cation[...]

Positioning your projector 17 Obtaining a pr eferr e d pr ojected image size 1. W all mount 2. Dimension (include projector and wall mount) Pr ojection dimensions Refer t o "Dimensions" on pag e 19 f or the center of lens dimensions of this projector befor e calculating the appr opriate position. MX852UST The screen as pect ratio is 4:3 a[...]

Positionin g your projector 18 MW853UST The screen aspect ratio is 16:10 and the pr ojected picture is 16:10. There is 5% tolerance among the se numbers due to op tical component variations. BenQ r ecommends that if you intend to permanently install the projector , you s hould ph ysically test the projection size and distance using the actual pr oj[...]

Positioning your projector 19 Dimensions 287.5 mm (W) x 201 mm (H) x 3 73.3 mm (D) 287.50 135.51 247.01 43.25 149.25 255.25 206.25 OPTICAL AXIS 360~665 141 235.0 Regulating Range 0~30 Regulating Range 0~40 195.0 227.9 130.2 373.3 W all Mount Installation Unit: mm 287.5 201[...]

Connection 20 Connection When connecting a sig nal source to the pr ojector , be sur e to: 1. T urn all equipment off bef ore making any conn ections. 2. Use the correct si gnal cables f or each source. 3. Ensure th e cables are firml y insert e d. In the connections shown below , some cables may not be included with the projector (see "Shi pp[...]

Connection 21 Connecting video sour ce devices Y ou need only connect the pr ojector to a video sour ce device using just one of the connecting methods, howe ver each pr ovides a differ ent level of video quality . The method you choose will most likel y depend upon the availability of matching terminals on both the projector and the video sour ce [...]

Connection 22 Pla ying sound thr ough the pr ojector Y ou can mak e use of the projector (mix ed mono ) speaker in yo ur presentations, and also connect separate amplif ied speakers to the A UDIO OUT sock et of the projec tor . If you ha ve a separate sound system, you will most likely want to connect the audio output of your Video so ur ce device [...]

Operation 23 Operation Star ting up the pr ojector 1. Plug the powe r cord into the pr ojector and into a wall socket. T urn on the wall sock et switch (where f itted). Check that the PO WER indicator light on the projector lights orange after power has been applied. Please use the original accessories (e.g. pow er cable) only with the device to a [...]

Operation 24 Using the quick install The pr ojector provides a hot k ey to set Pr ojector Installation , Te s t Pat te rn , an d K eystone quickly . Press Quick In stall on the remote control and pr ess ▲ / ▼ to select: • Projector Installation: See "Positioning your proj ector" on page 16 . • T est Pattern: See "Using the te[...]

Operation 25 Fine-tuning the imag e size and clarity Sharpen t he image by rotating the FOC US ring. Corr ecting k eystone K eyst oning refers to the situation w here the pr ojected image is noticeably wider at either the top or bottom. It occurs when the pr oj ector is not perpendicular to the screen. T o correct this, besides adjusting th e heigh[...]

Operation 26 Using the menus The projector is equipp ed with On-Screen Displa y (OSD) menus for making various adjustment s and settings. Below is the ov er view of the OSD menu. T o use the OSD menus, please set them to your familiar language first. 1. Pres s MODE/ENTER on the projector or remote control to turn the OSD menu on. 3. Press ▼ to hi[...]

Operation 27 Securing the pr ojector Using a security cable lock The projector has to be installed in a safe pl ace to prevent theft. Otherwise, purchase a lock, such as a K ensing ton lock, to secure th e pr ojector . Y ou can locate a K ensington lock slot on the left side of the projector . See "K ensington anti -theft lock sl ot" on p[...]

Operation 28 If y ou forget the pass wor d If the passwor d function is activat e d, you will be asked to enter the fiv e-digit password e very time you turn on the projector . If you enter the wrong passw ord, the passw ord err or message as pictured to the right displa ys lasting for three seconds, and the message 'INPUT P ASSW O RD' f [...]

Operation 29 6. Y ou ha ve successfully assigned a ne w password to the projector . Re member to enter the new passw ord next time the pr ojector is started. 7. T o leav e the OSD menu, pr ess MENU/ EXIT. Disabling the pass wor d function T o disable password pr otection, go back to the System Setup: Advanced > Security Settings > Chan g e Se[...]

Operation 30 Switching input signal The projector can be connected to multiple de vices at the same time . How ever , it can only displa y one full screen at a time . Be sure the Quick Auto Search function in the Source menu i s On (which is the default of this projector) if y ou want the pr ojector t o au tomatically search for the signals. Y ou c[...]

Operation 31 Magnifying and sear ching for details If you need to find th e details o n the projected picture, magnify the pictur e. Use the direction ar row k eys for na vigating the picture. • Using the r emote control 1. Press Digital Zoom+/ - to displa y the Zoom bar . Press Digital Zoom+ to magnify the center of the picture. Pres s the key r[...]

Operation 32 About the aspect ratio In the pictures below , the black portions are inactive area s and the white por tions ar e active ar eas. OSD menus can be displa yed on those unused black areas. 1. Auto : Scales an image proportionally to fit the pr ojector's native r esolution in its horizontal width. This is suitable for the incoming im[...]

Operation 33 Optimizing the image Using W a ll Color In the situation wher e you ar e projecting on to a co lor ed surface such as a painted wall which ma y not be white , the Wall Color feature can help corr ect the projected pictur e’ s color to prev ent possible color difference betw een the source and pr ojected pictures. T o use this functio[...]

Operation 34 6. Press ▼ to select a sub-menu item to be changed and adjust the value with ◄ / ► . See "Fine-tuning the image quality in user modes" below f or deta ils. Fine-tuning the imag e quality in user modes According to the detected signal type, and se lected picture mode, some of the functions listed below ma y not be availa[...]

Operation 35 Setting a prefer red color temperatur e T o set a preferr ed color temperature: 1. Highlight Color T empera ture and select War m , Normal or C ool by pressi ng ◄ / ► on the projector or remote contr ol. 2. Press ▼ to highlight Color T emperature Fine T uning and pre ss MODE/ ENTER . The Color T emperature Fine T uning page appea[...]

Operation 36 Please ref er to the illustr ation to the right for how the colors relate to each other . For example, if you select Red and set its range at 0, only pur e red in the pr ojected picture will be selected. Incr easing its range will include red close to yello w and red close to magenta. 5. Press ▼ to highlight Saturation and adjust its[...]

Operation 37 3. Press ▼ to highlight Timer Displa y and choose if you want the timer to show up on the screen b y pressing ◄ / ► . 4. Press ▼ to highlight Timer P ositio n and set the timer position by pr essing ◄ / ► . 5. Press ▼ to highlight Timer Cou nting Direction and select your desir ed counting direction b y pressing ◄ / ►[...]

Operation 38 Fr eezing the image Press FREE ZE on the remote control to freeze the image. The word ' FREEZE ' will appear on the screen. T o release the function, pr ess any k ey on the projector or remote control. If your r emote control has the following k eys, please note that they cannot be pr essed to release th e function: LASER , #[...]

Operation 39 Operating in a high altitude envir onment W e recommend y ou use the High Altitude Mode when your en vironment is betw een 1500 m –3000 m abov e sea lev el, and temperature is betw een 0°C–30°C. Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature is be t ween 0°C and 35°C . The projector[...]

Operation 40 Adjusting the sound le vel T o a djust the sound lev el, • Using the r emote control Press or to select a desired sound level. •U s i n g t h e O S D m e n u 1. Repeat steps 1-2 abov e. 2. Press ▼ to highlight Vo l u m e and press ◄ / ► to select a desired sound level. T urning off the P ow er on/off ring tone 1. Repeat steps[...]

Operation 41 Using the teaching templates The pr ojector pro vides several pr eset patterns f or various teaching purposes. T o activate the pattern: 1. Open the OSD menu and go to the D isplay > T eaching T emplate and pr ess ▲ / ▼ to select Blackboard or Whiteboard . 2. Press ◄ / ► to choose the pattern y ou need. 3. Press MODE/ENTER t[...]

Operation 42 Shutting down the pr ojector 1. Press PO WER or OFF and a confirmation message will appear pr ompting you . If you don't respond in a f ew seconds, the message will disappear . 2. Press PO WER or OFF a second time . The PO WER indicato r lig ht flashes orange, the projection lamp shuts do wn, and the fans will continue to run for [...]

Operation 43 Menu operation Menu system Please note that the on-screen displa y (OSD) menus var y according to the signal type selected. Main m enu Sub-menu Option s 1. Display W all color Off/Light Y ellow/Pink/Light Gree n/ Blue/Blackboard Aspect Rati o Auto/Rea l/4:3/16:9/16:10 Ke y st o n e Pos iti on Phase H.size Digital zoom PC:1.0X~2. 0X; Vi[...]

Operation 44 2. Picture Picture Mode Dynamic/Presentation/sRGB/ Cinema/3D/User 1/User 2 Refer ence Mode Dynamic/Presentation/sRGB/ Cinema/3D Brightness Contrast Color Tint Sharpness Brilliant Color On/Off Color Te m p e r a t u r e Cool/Normal/ W arm Color T emperatur e Fine T uning R Gain/G Gain/B Gai n/R Offset/ G Offset/B Offset 3D Color Managem[...]

Operation 45 4. System Setup: Basic Presentation Timer Timer P eriod 1~240 min Timer Displa y Alwa ys/1 min/2mins/3 mins/ Never Timer P osition T op-Left/Bottom-Left/T op-R ight/ Bottom-Right Timer Counting Direction Count Down/Co unt up Sound Reminder On/Off On/Off Y es/No Language Projector Installation F r o n t Ta b l e / R e a r Ta b l e / R e[...]

Operation 46 Note that the menu items ar e av ailable when th e projector detects at least one valid signal. If there is no equipment connected to the pr ojector or no signal detected, limited menu items are accessible. 5. System Setup: Advan ced High Altitude Mode On/Off Audio Settings Mute On/Off Vo l u m e Po wer on/off R ing On/Off Lamp Settin [...]

Operation 47 Description of each menu FUNCTION DESCRIPTION 1. Display menu W all color Corr ects the projected pictur e’ s colo r when the pr ojection surface is not white. See "Using W all Color" on page 33 for details. Aspect Ratio There ar e sev eral options to set the image's aspect ratio depending on your input signal sour ce.[...]

Operation 48 1. Display menu 3D This projector f eatures a 3D function which enables y ou to enjoy the 3D movies, videos, and sporting ev ents in a more realistic wa y by presentin g the depth of the images. Y ou need to wear a pair of 3D glasses to view the 3D images. 3D Mode The default setting is Au to and the pr ojector automa ticall y chooses [...]

Operation 49 2. Picture menu Picture Mode Pre- defined picture modes are pr ovided so you can optimize your projector image set-up to suit y our program type. See "Selecting a picture mode" on page 33 for de tails. Refer ence Mode Selects a pictur e mode that most suits y our need for the image quality and further fine-tune the image base[...]

Operation 50 4. System Setup: Basic menu Presentation Timer Reminds the presenter to finish the presentation within a certain time frame . See "Setting the presentation timer" on page 36 for details. Languag e Sets the language for the On -Screen Displa y (OSD) menus. See "Using the menus" on page 26 for details. Projector Insta[...]

Operation 51 4. System Setup: Basic men u Pa ne l K ey Lock Disables or enables all pa nel k ey functions except PO WER on the projector and k eys on the r emote control. See "Locking control k eys" on page 38 for details. Background Color Selects background a ppearance when there is no signal. Splash Screen Allows you to select which log[...]

Operation 52 5. System Setup: Advanced menu Baud Rate Selects a baud rate that is identica l with your computer’ s so that you can connect the projector us ing a suitable RS-232 cable and update or download the projector’ s firmware. This function is intended for qualified service personnel. Te s t P a t t e r n Selecting On enables the functio[...]

Operation 53 The Information menu shows y ou the current operating status of the projector . 6. Information menu Curr ent System Status Source Shows the current signal source. Picture Mode Shows the selected mode in the Picture menu. Resolution Shows the native r esolution of the input signal. Lamp Mode Sh ows th e curre nt la mp mo de. 3D F ormat [...]

Maintenance 54 Maintenance Car e of the pr ojector Y our projector needs little maintenance. The on ly thing y ou need to do on a regular basis is to keep th e lens clean. Nev er remov e any par ts of the pr ojector except the lamp. Contact y our dealer if other parts need replacing. Cleaning the Pr ojector Mirr or Remove the dust with a "Bell[...]

Maintenance 55 Lamp information Getting to kno w the lamp hour When the projector is in operation, the durati on (in hours) of lamp usage is automatically calculated by the built-in timer . The method of calculating the equivalent lamp hour is as follows: See "Setting Lamp mode as Economic or Smar tEco" below for mor e information on Econ[...]

Maintenance 56 Timing of r eplacing the lamp When the Lamp indicat or lights up red or a message a ppears suggesting it is time to replace the lamp , please install a ne w lamp or consult y our dealer . An old lamp ma y cause a malfunction in the pr ojector and in some instances the lam p may explode. T otal (equivalent) lamp hour = 1.75*(hours us [...]

Maintenance 57 Replacing the lamp • If lamp replacement is performed while the projecto r is suspended upside-down fr om the ceiling, mak e sure that no one is underneath the lamp socket to a v oid an y possible injury or damage to the human ey es caused by fractured lamp . • T o reduce the risk of electrical shock, alwa ys turn the projector o[...]

Maintenance 58 4. Loosen the two captiv e screws that secure the lamp . • Do not turn the power on with the lamp cover remo ved. • Do not insert your fingers betw een the lamp and the projector . The sh arp edges inside t he projector ma y cause injuries. 5. Lift the handle so that it stands up . Use the handle to slowly pull the lamp out of th[...]

Maintenance 59 10. Restart the projector . Do not turn the power on with the lamp cover r emoved. Resetting the lamp timer 11. After the startup logo , open the On-Sc r een Display (OSD) men u. Go to the SYSTEM SETU P: Advanced > Lamp Sett ings menu. Pr ess MODE/ENTER . The Lamp Settin gs page displays. Highlight Reset lam p timer . A warning me[...]

Maintenance 60 Indicators Light Status & Description Po w e r Te m p Lamp Po w e r e v e n t s Orange Off Off Stand-by mode Green Flashing Off Off Power in g up Green Off Off Normal operation Orange Flashing Off Off Projector is cooling. Lamp e vents Off Off Orange Flashing The lamp ignition is not lit up. Off Off Red 1. The projector needs 90 [...]

Troubles hooting 61 T r oubleshooting The projector does not turn on. No picture Blurr ed image Remote contr ol does not w ork The passw ord is incorr ect Cause Remedy There is n o power fr om the power cab le . Plug the po wer cord in to the A C inlet on the projector , and plug the pow er cord into t he power outlet. If the power outlet has a swi[...]

Specifications 62 Specifications Pr ojector specifications All specifications ar e subject to change without notice. Optical Resolution MX852UST 1024 x 768 XGA MW853UST 1280 x 800 WXGA Display system Single-chip DLP™ system Lens F/Number F = 2.5, f = 5.1 mm Lamp 230W lamp Electrical Power supply AC100-240V , 3.5A 50-60 Hz (Automati c) Power consu[...]

Specifications 63 Timing char t Supported timing for PC input Resolution For mat Refresh rate (Hz) H- fr equency (kHz) Pixel Fr equency (MHz) 720 x 400 720 x 400_70 70.087 31.469 28 .3221 640 x 480 V GA_60* 59.94 31.469 25.175 V GA_72 72.809 37.861 31.5 V GA_75 75 37.5 31.5 V GA_85 85.008 43.269 36 800 x 600 SV GA_60* 60.317 37.879 40 SV GA_72 72.1[...]

Specifications 64 * Supported timing for 3D signal with Fr ame Sequential, T op-Bottom and Side-by-Side form at. ** Supported timing for 3D signal with Frame Sequential format. *** Supported timing f or 3D signal with T op-Bottom and Side-by-Side format. • The timings showing abov e ma y not be suppor ted due to EDID file and V GA graphic card li[...]

Specifications 65 Support timing for Video input * Supported timing for 3D signal with Frame Sequential f ormat. Support timing for HDMI (HDCP) input Format Resolution Refres h rate (Hz) H- fr equency (kHz) Pixel Fr equency (MHz) NTSC* - 60 15.73 3.58 P AL - 50 15.63 4.43 SEC AM - 5 0 15.6 3 4.25 or 4. 41 P AL-M - 60 15.73 3.58 P AL-N - 50 15.63 3.[...]

Specifications 66 * Supported timing for 3D signal with Fr ame Sequential, T op-Bottom and Side-by-Side form at. ** Supported timing for 3D signal with Frame Sequential format. *** Supported timing f or 3D signal with T op-Bottom and Side-by-Side format. • The timings showing abov e ma y not be suppor ted due to EDID file and V GA graphic card li[...]

Specifications 67 Support ing timing f or HD MI Video input * Supported timing for 3D signal with Frame Sequential, Frame Packing, T op-Bottom and Side-by-Side format. ** Supported timing for 3D signal with Frame Packing, T op-B ottom and Side-by-Side form at. *** Supported timing f or 3D signal with Frame Se quential format. **** Support e d timin[...]

Warranty and Copyright information 68 W arran ty and Cop yright information Limited warranty BenQ warrants this pr oduct against any de fects in material an d workmanship , under normal usage and storag e. Proof of pur chase date will be required with an y warranty claim. In the e vent this pr oduct is found to be defective within the war ran ty pe[...]