English dropdown-ico

Black Box LW010A manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Black Box LW010A, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Black Box LW010A one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Black Box LW010A. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Black Box LW010A should contain:
- informations concerning technical data of Black Box LW010A
- name of the manufacturer and a year of construction of the Black Box LW010A item
- rules of operation, control and maintenance of the Black Box LW010A item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Black Box LW010A alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Black Box LW010A, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Black Box service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Black Box LW010A.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Black Box LW010A item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500 ) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com PWR WLNK [...]

  • Page 2

    [...]

  • Page 3

    1 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interferen[...]

  • Page 4

    2 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia[...]

  • Page 5

    3 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros aparatos (incluyendo amplificadores) que producen calor . 11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el in[...]

  • Page 6

    4 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES TRADEMARKS Apple ® is a registered trademark of Apple Computer, Inc. Digital™ is a trademark of Digital Equipment Corporation. HP ® is a registered trademark of Hewlett-Packard. IBM ® is a registered trademark of International Business Machines Corporation. Windows ® is a registered trade[...]

  • Page 7

    5 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Contents 1. Specifications..............................................97 2. Quick-Start Setup and Operation for the Hub .................................................14 3. Introduction ...............................................16 3.1 The 3-Mbps Wireless Ethernet Product Line .........[...]

  • Page 8

    6 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 5.1 Accessing Advanced Setup Functions ............................................80 5.1.1 Hub Main Menu .......................87 5.1.2 System Configuration Menus........................................89 5.1.3 Current Station Parameters .....90 5.1.4 IP Related Items .......................9[...]

  • Page 9

    7 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 1. Specifications NOTE All specifications apply to Hub models LW001A, LW005A, and LW007A, Adapter models LW002A, LW003A, LW008A, and LW009A, and Bridge models LW004A and LW010A, unless otherwise noted. Radio/Modem Frequency —2.4 to 2.4835 GHz Radio type —Spread spectrum, Frequency Hopping T[...]

  • Page 10

    8 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Range, open air (LW004A, LW010A) —Up to 7 miles (10 km) Antenna diversity— LW001A, LW002A, LW003A, LW005A: 2 attached antennas, 2 dBi omni; LW007A, LW008A, LW009A: 2 detached antennas, 2 dBi omni; LW004A: 1 or 2 attached antennas, 2 dBi omni; LW010A: 1 or 2 detached antennas, 2 dBi omni Opt[...]

  • Page 11

    9 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Standards— IEEE 802.3, IEEE 802.1d, Transparent to network protocols (IP, IPX, Appletalk, OSI, NetBIOS, DECnet, etc.) LED Indicators (LW001A, LW005A, LW007A): Power and Self-Test —PWR Wired LAN activity —ETHR Radio Interference —INFR Wireless LAN load (3 LEDs) —H (High), M (Medium), L[...]

  • Page 12

    10 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Security (LW004A, LW010A): Encryption —802.11 compatible Authentication —Network ID, Password Management (LW001A, LW005A, LW007A): SNMP agent —MIB-II, bridge MIB, Radio MIB Wired Ethernet, serial SLIP, and wireless management access Software download by TFTP Local monitor (RS-232) Manage[...]

  • Page 13

    11 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Management (LW003A, LW009A): SNMP agent —MIB-1 and II, bridge MIB, Private MIB Wired Ethernet, serial SLIP, and wireless management access Software downloaded by TFTP Management (LW004A, LW010A): SNMP agent —MIB-II, bridge MIB, Radio MIB Wired Ethernet, serial SLIP, and wireless management[...]

  • Page 14

    12 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Dimensions 5.1”H x 3.4”W x 1.2”D (13 x 8.6 x 3 cm) Weight 1 lb. (0.45 kg) Environmental Operating temperature —32° to 105° F (0° to 40° C) Operating humidity —5% to 95% non-condensing Immunity Will maintain link under all conditions —Per EN 50082-1[...]

  • Page 15

    13 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Approvals (LW001A, LW005A, LW007A): UL 19.50 FCC Part 15 ETS 300-328 VDE Class B CE Approvals (LW002A, LW003A, LW004A, LW008A, LW009A, LW010A): UL, UL/C, TUV/GS FCC Part 15 ETS 300-328 VDE Class B[...]

  • Page 16

    14 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 2. Quic k Star t Setup and Operation f or the Hub Use the following steps to get up and running with your 3-Mbps Wireless Ethernet Hub. (For more detailed procedures, see Section 4.1 .) 1. Position the Hub in a high, central location, well away from moving objects and metal furniture. NOTE Whe[...]

  • Page 17

    15 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 4. Check the function of the Hub using the front-panel LED indicators as follows: • PWR—Power supply • INFR—Radio interference • ETH—Ethernet activity • LOAD—Number of associated stations (Low, Medium, High)[...]

  • Page 18

    16 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 3. Intr oduction 3.1 The 3-Mbps Wireless Ethernet Product Line The Wireless Ethernet product line contains the following units: • Wireless Ethernet Hub (LW001A, LW005A, or LW007A) • Wireless Ethernet Workstation Adapter (LW002A or LW008A) • Wireless Ethernet Four-Port Workstation Adapter[...]

  • Page 19

    17 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES The LW001A and LW007A function exactly the same way, but the LW001A has permanently attached antennas, and the LW007A has detachable antennas. A third Hub, LW005A (which is covered in a separate manual), has the same hardware as the LW007A, but different software. It works with portable comput[...]

  • Page 20

    18 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 3-1. Wireless Ethernet Hub (LW001A or LW007A) Installed on Wall. The Wireless Ethernet Hub contains an embedded SNMP agent that lets you manage it from the LAN Management Information Base. Software upgrades are downloaded by TFTP.[...]

  • Page 21

    19 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 3-2. Wireless Ethernet Hub (LW001A or LW007A) Installed on Shelf.[...]

  • Page 22

    20 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES W IRELESS E THERNET W ORKSTATION A DAPTER (LW002A OR LW008A) The LW002A is a wireless LAN adapter that converts any 10BASE-T Ethernet equipped computer (including PCs, X-Terminals, Digital™, Sun, HP ® , IBM ® , and Apple ® ), into a wireless LAN station. The LW002A is transparent to the c[...]

  • Page 23

    21 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 3-3. Workstation Adapter (LW002A or LW008A). The network stays connected while you roam between overlapping coverage areas; plus, you get continuous transmission and reception while moving at high speed without losing or duplicating data packets.[...]

  • Page 24

    22 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES W IRELESS E THERNET 4-P ORT W ORKSTATION A DAPTER (LW003A OR LW009A) The Wireless Ethernet 4-Port Workstation Adapter (LW003A) is a wireless LAN adapter that connects a workgroup of up to four 10BASE-T Ethernet equipped workstations to the wireless LAN. Workstations that can be converted by th[...]

  • Page 25

    23 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES The 4-Port Workstation Adapter contains an embedded SNMP agent and software downloading capabilities that let you manage it from the LAN Management Information Base. Figure 3-4. 4-Port Workstation Adapter (LW003A or LW009A).[...]

  • Page 26

    24 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES W IRELESS B RIDGE (LW004A OR LW010A) The Wireless Bridge (LW004A) is a high-speed, wide- range wireless LAN bridge that provides connectivity to remote Ethernet networks. The LW004A and LW010A function exactly the same way, but the LW004A has permanently attached antennas, and the LW010A has d[...]

  • Page 27

    25 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES PCMCIA W IRELESS A DAPTER (LW006A) The LW006A adapter, which is covered in detail in a separate user manual, gives the portable computer user complete mobility, allowing seamless roaming throughout the wireless LAN campus. The PCMCIA Wireless Adapter converts any portable computer (notebook, l[...]

  • Page 28

    26 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 3-5. PCMCIA Wireless Adapter (LW006A). W IRELESS B RIDGE FOR PCMCIA A DAPTER (LW005A) The Wireless Bridge for PCMCIA Adapter is covered in a separate user manual. O PTIONAL A NTENNAS (LW011A AND LW012A) The 6 dBi Omnidirectional Antenna (LW011A) and the Unidirectional Antenna (LW012A) w[...]

  • Page 29

    27 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 3.2 Features of Wireless Ethernet LANs • Saves cabling costs— The wireless Ethernet LAN saves you cabling costs that can amount to up to 40% of your LAN installation cost. • Plug-and-play installation —No additional software or hardware installation is required. After connecting the un[...]

  • Page 30

    28 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES • Workstation mobility— Notebook and pen-based computer users can roam throughout the Wireless Ethernet campus. As long as the coverage areas are overlapping this mobility is seamless. Users maintain their network connection while roaming from cell to cell. • Quickly extends wired LAN ?[...]

  • Page 31

    29 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 4. Setting Up the LAN 4.1 Installing the Hub Follow these steps: • Check the package contents. • Choose the best location to place the Hub. • Connect to the power supply. • Connect to the Ethernet backbone. • Check functionality using the LED indicators. Step 1: Check to make sure th[...]

  • Page 32

    30 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES • A monitor connector cable. (This is for connecting the Hub and the Workstation Adapter [LW002A, LW003A, LW008A, or LW009A] to a monitor for performing the advanced setup functions described in Chapter 5 ). • This user’s manual. If anything is missing from your package, please contact y[...]

  • Page 33

    31 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Antennas Make sure the antennas are extended vertically in relation to the floor. Central Location Install the Hub in a central location in the coverage area you intend to include in the cell. Good positions are: • At the center of a large room. • At the center of a corridor. • At the in[...]

  • Page 34

    32 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Heat Sources Keep the Hub well away from sources of heat, such as radiators, air-conditioners etc. Microwave Ovens Place the Hubs well clear of radiation sources that emit in the 2.4 GHz frequency band, such as microwave ovens.[...]

  • Page 35

    33 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Step 3: Connect the Hub to the Power Supply • Connect the supplied power transformer to an external power supply at 110 or 220 VAC. • The unit operates on a power input of 5 VDC (1200 mA). Figure 4-1. Connecting to Power Supply.[...]

  • Page 36

    34 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Step 4: Connect the Hub to the Ethernet Backbone Attach one end of a regular (uncrossed) Ethernet connector cable (not supplied) to the RJ-45 port on the back panel of the Hub (marked UTP). Attach the other end of the connector cable to any available Ethernet Hub outlet. Figure 4-2. Hub Back P[...]

  • Page 37

    35 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-3. Connecting the Hub to the Ethernet Backbone. Step 5: Check Hub Functionality Using LED Indicators The following aspects of Hub functionality are checked using the LEDs on the front panel. • Power supply • Radio interference • Ethernet activity • LAN load[...]

  • Page 38

    36 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-4. Front-Panel LED Indicators. PWR (Power supply; Power-on test) Off—During power-on Blinks—After failed power-on On—After successful power-on INFR (Radio interference) Off—No interference Blinks—Interference present ETHR (Ethernet activity) Off—No activity on the Ethernet[...]

  • Page 39

    37 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES LOAD (L,M,H) (No. of associated stations) No stations 1-4 stations 5-8 stations 9 or more stations QL T H M L QLT H M L QLT H M L QLT H M L[...]

  • Page 40

    38 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Verifying the Ethernet Connection Once the Hub is connected to an Ethernet outlet, the ETHR LED on the front panel will blink when sensing LAN traffic, thus verifying the Ethernet connection. 4.2 Installing the Workstation Adapter (LW002A or LW008A) Installing the Adapter is a plug-and-play pr[...]

  • Page 41

    39 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES • Workstation Adapter (LW002A or LW008A), complete with two omnidirectional antennas. • 5 VDC power supply transformer. • This User’s Manual. Figure 4-5. Back Panel of the Adapter. Step 2: Connect the Adapter to the power supply. • Connect the power transformer to an external power o[...]

  • Page 42

    40 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-6. Connecting to the Power Supply.[...]

  • Page 43

    41 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Step 3: Connect the Adapter to your computer or workstation. • Connect the RJ-45 connector at one end of a regular (uncrossed) Ethernet cable, to the UTP port on the back panel of the Adapter. • Connect the RJ-45 connector on the other end of the Ethernet cable to the input socket of the E[...]

  • Page 44

    42 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Step 4: Position Your Adapter You will get the best results if you choose a position for your Adapter, keeping the following points in mind: • Metal Furniture— Position your Adapter well clear of metallic furniture and far from moving objects such as metallic fans or metallic doors. • Mi[...]

  • Page 45

    43 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES • Ethernet activity detected. • Reception quality. Figure 4-8. Front-Panel LED Indicators. Front-Panel LED indicators PWR (Power supply; Power-on test): Off—During power-on Blinks—After failed power-on On—After successful power-on WLNK Off—Scanning for Hub On—Synchronized with Hu[...]

  • Page 46

    44 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES QLT (L, M, H)) Very-low-quality reception Low-quality reception Medium-quality reception High-quality reception NOTE The QLT LEDs will also not light if the workstation is not synchronized with a Hub. QL T H M L QLT H M L QLT H M L QLT H M L[...]

  • Page 47

    45 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 4.3 Installing the 4-Port Workstation Adapter (LW003A or LW009A) The 4-Port Workstation Adapter (LW003A or LW009A) is a plug-and-play installation. All you need to get up and running is to connect the power supply to the Adapter and to connect the Adapter to your computer. You can make sure th[...]

  • Page 48

    46 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-9. Front and Back Panels of the 4-Port Workstation Adapter.[...]

  • Page 49

    47 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Step 2: Connect the Adapter to the power supply. • Connect the power transformer to an external power outlet at 110 or 220 VAC. • Connect the output jack of the power transformer to the DC input socket on the side panel of the Adapter. The unit operates on a power input of 5 VDC (1200 mA).[...]

  • Page 50

    48 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Step 3: Connect the 4-Port Adapter to your computer or workstation. • Connect the RJ-45 connector at one end of a regular (uncrossed) Ethernet cable, to any available port on the front panel of the Adapter. • Connect the RJ-45 connector on the other end of the Ethernet cable to the input s[...]

  • Page 51

    49 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-11. Connecting the Adapter to a Workstation.[...]

  • Page 52

    50 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Step 4: Position the 4-Port Adapter You will get the best results if you keep the following points in mind when you choose a position for your adapter: • Metal Furniture— Position your Adapter well clear of metallic furniture and far from moving objects such as metallic fans or metallic do[...]

  • Page 53

    51 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Step 5: Check functionality using the LED indicators. LEDs on the front and back panels of the Adapter indicate the following: Front-panel LED indicators: • Workstation connected. • Ethernet activity on each of the four ports. Figure 4-12. LED Indicators on the Front Panel of the 4-Port Wo[...]

  • Page 54

    52 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Back-panel LED indicators: • Power supply and self-test. • Wireless LAN link established by synchronization with a Hub. • Ethernet activity detected. • Reception quality. Figure 4-13. Indicators on the Back Panel of the 4-Port Workstation Adapter.[...]

  • Page 55

    53 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES PWR (Power supply; Power-on test): Off—During power-on Blinks—After failed power-on On—After successful power-on WLNK Off—Scanning for Hub On—Synchronized with Hub ETHR Off—No activity on the Ethernet port Blinks—Activity on the Ethernet port[...]

  • Page 56

    54 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES QLT (L, M, H)) Very-low-quality reception Low-quality reception Medium-quality reception High-quality reception NOTE The QLT LEDs will also not light if the workstation is not synchronized with a Hub. QL T H M L QLT H M L QLT H M L QLT H M L[...]

  • Page 57

    55 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 4.4 Installing the Wireless Bridge (LW004A or LW010A) The Wireless Bridge (LW004A or LW010A) is a plug- and-play installation. All you need to get up and running is to connect the power supply to the Bridge and to connect the Bridge directly to the Hub or to any available outlet of the Etherne[...]

  • Page 58

    56 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-14. Front Panel of the Wireless Bridge. Step 2: Connect the Wireless Bridge to the power supply. • Connect the power transformer to an external power outlet at 110 or 220 VAC. • Connect the output jack of the power transformer to the DC input socket on the back panel of the Wirele[...]

  • Page 59

    57 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-15. Connecting to the Power Supply. Step 3: Connect the Wireless Bridge to the Hub or to any available outlet of the Ethernet LAN. • Connect the RJ-45 connector at one end of a regular (uncrossed) Ethernet cable, to the UTP port on the back panel of the Bridge.[...]

  • Page 60

    58 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES • Connect the RJ-45 connector on the other end of the Ethernet cable to the Ethernet Hub or to any available Ethernet outlet. Figure 4-16. Connecting the Wireless Bridge to an Ethernet Hub or Outlet.[...]

  • Page 61

    59 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Step 4: Position the Wireless Bridge and the Antennas You will get the best results if you choose a position for your Wireless Bridge, keeping the following points in mind: • Antennas —For detailed information on selecting, installing and mounting antennas, see Section 4.9 . • Metal Furn[...]

  • Page 62

    60 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Step 5: Check functionality using the LED indicators. The following aspects of Wireless Bridge functionality are checked using the LEDs on the front panel. • Power supply and self-test • Wireless LAN link established by synchronization with a Hub • Ethernet activity detected • Receptio[...]

  • Page 63

    61 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Front-panel LED indicators: PWR (Power supply; Power-on test): Off—During power-on Blinks—After failed power-on On—After successful power-on WLNK Off—Scanning for Hub On—Synchronized with Hub ETHR Off—No activity on the Ethernet port Blinks—Activity on the Ethernet port[...]

  • Page 64

    62 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES QLT (L, M, H)) Very-low-quality reception Low-quality reception Medium-quality reception High-quality reception NOTE The QLT LEDs will also not light if the Bridge is not synchronized with a Hub. QL T H M L QLT H M L QLT H M L QLT H M L[...]

  • Page 65

    63 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 4.5 Setting Up a Basic Wireless Ethernet Cell A basic Wireless Ethernet cell consists of an Hub and the wireless workstations associated with it. You can convert most workstations (PCs, X-Terminals, Apple, Digital, Sun, HP, IBM and others) that are equipped with an Ethernet network interface c[...]

  • Page 66

    64 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-18. Basic Wireless Ethernet Cell. To set up a basic Wireless Ethernet cell: 1. Place the Hub as high as possible on a wall or on a high stand, or attach it to the ceiling with a mounting bracket. 2. Follow the installation procedures described in Section 4.2 . 3. Install a Workstation[...]

  • Page 67

    65 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Use the LED Indicators on the front panel of the Workstation Adapter to check the received signal quality. The signal quality should be in the high to medium range. 4. Make any adjustments necessary. For example: • Adjust the antenna. • Adjust the location of the Workstation Adapter. • A[...]

  • Page 68

    66 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES - Wood, glass plastic and bricks reflect part of the radio signals and allow part of the signals to pass through them. - Water and objects containing a lot of moisture absorb a large part of the radio signals. Figure 4-19. Wireless Ethernet LAN in Typical Office Environment.[...]

  • Page 69

    67 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES • Distance Between Cells —The distance between the cells varies according to the floor plan of the building and the nature of the indoor environment. Five general categories of areas can be classified: 1. Open Indoor Areas —Open office areas with no partitioning and no obstacles between [...]

  • Page 70

    68 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-20. Overlapping Wireless Ethernet Cells in Office Environment. 3. Closed Indoor Areas —A floor divided into Wireless Ethernet individual offices by concrete or masonry walls, or a house. Suggested maximum distance between Hub and workstation: 50 m (160 ft.) 4. Open Outdoor Areas —[...]

  • Page 71

    69 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Suggested maximum distance between Hub and workstation: 1000 m (3200 ft.) With high-gain antennas: 1500 m (5000 ft.) 5. Obstructed Outdoor Areas —Outdoor areas with obstructed line-of-sight between the Hub and the Wireless Ethernet workstation. Suggested maximum distance between Hub and work[...]

  • Page 72

    70 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES To set up two overlapping Wireless Ethernet cells: 1. Install the first Hub wireless Ethernet as high as possible on a wall, on a high stand, or attached to the ceiling, using the steps described in Section 4.1 . 2. Install the second Hub so that the two are closer together than the distance d[...]

  • Page 73

    71 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 6. Temporarily disconnect the first Hub from the power supply. Verify a high to medium received radio signal from the second Hub. 7. Adjust the distance between the Hubs if necessary. The two coverage areas are now overlapping. 8. Continue setting up overlapping cells until the required area i[...]

  • Page 74

    72 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-21. Basic Wireless Ethernet Cell. Once the Adapters establish association, you can communicate with all the other wireless stations in the cell and via the Hub’s Ethernet connection, with all the network facilities. Once the Bridge establishes association, the Hub starts forwarding [...]

  • Page 75

    73 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 4.8 Associating with Other Hubs When two or more adjacent Hubs are positioned close enough to each other, a part of the coverage area of the Hubs will overlap. In high-traffic-density areas, Hubs are sometimes positioned so that all of their coverage areas overlap. A workstation situated in an[...]

  • Page 76

    74 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 4-22. Associating with Different Hubs. 4.9 Antennas The Wireless Hub, Workstation Adapter, 4-Port Workstation Adapter, and Wireless Bridge are each available in two models that are identical except for their antennas. The Wireless Hub (LW001A), Workstation Adapter (LW002A), 4-Port Works[...]

  • Page 77

    75 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES The Wireless Hub (LW007A), Workstation Adapter (LW008A), 4-Port Workstation Adapter (LW009A), and Wireless Bridge (LW010A) are all supplied with two customized female connectors for use with the external antennas, which you must order separately. • 6 dBi Omnidirectional Antenna (LW011A for u[...]

  • Page 78

    76 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES USA (LW011A) 5 meters RG-214 cable complete with assembled sections and connectors: • SMA male connector on one end connects to the LW007A, LW008A, LW009A, or LW010A. • N-type connector on other end. Figure 4-23. One LW011A 6 dBi omnidirectional antenna connected to an LW010A external ante[...]

  • Page 79

    77 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Europe (LW011AE) 3 meters RG-58 cable complete with assembled connectors: • SMA male connector on one end connects to the LW007A, LW008A, LW009A, or LW010A. • N-type male connector on the other end connects to antenna. 8.5 D B I U NIDIRECTIONAL A NTENNA (LW012A OR LW012AE) The 8.5 dBi Unid[...]

  • Page 80

    78 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES • SMA male connector on the other end connects to antenna. Figure 4-24. One LW012A 8.5 dBi unidirectional antenna connected to an LW010A external antenna port. Europe (LW011AE) 6 meters RG-58 cable complete with assembled connectors: • SMA male connector on one end connects to the LW007A, [...]

  • Page 81

    79 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES • SMA male connector on the other end connects to antenna. • Range: 900 m PROFESSIONAL INSTALLERS ONLY Detached antennas, whether installed indoors or out, are to be installed ONLY by experienced antenna installers who are familiar with local buildings and safety codes, and wherever necess[...]

  • Page 82

    80 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 5. Adv anced Setup 5.1 Accessing Advanced Setup Functions The Wireless Ethernet product line has been designed as a plug-and-play solution, and will operate without any user intervention. However, you can change some of the default parameters to get additional functionality. There are two ways[...]

  • Page 83

    81 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Local Monitor The local monitor allows you to access the Hub parameters from an ASCII ANSI terminal, or a PC, using a terminal-emulation program such as the Windows ® Terminal or ProComm ® . You can access the advanced setup functions by connecting a terminal to the back panel of the Hub. Fi[...]

  • Page 84

    82 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 5-2. Connecting Terminal Cable to COM Port with a 25-Pin Connector.[...]

  • Page 85

    83 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES To access the advanced setup functions with a local monitor: You can access the advanced setup functions using an ASCII ANSI terminal or a PC capable of emulating an ASCII ANSI terminal using the following settings: Baud rate 9600 Data bits 8 Stop bits 1 Parity None Flow control None Connector[...]

  • Page 86

    84 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES The Terminal screen appears. Figure 5-3. Terminal Icon in Windows Program Manager.[...]

  • Page 87

    85 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 5. Select Communication from the Setup menu. The communication dialog box opens. Figure 5-4. Windows Terminal Communication Dialog Box.[...]

  • Page 88

    86 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 6. Select the following settings: Baud rate 9600 Data bits 8 Stop bits 1 Parity None Flow control None Connector Available Com port 7. Click OK. The Hub Advanced Setup Main Menu opens. Figure 5-5. Terminal Screen Showing Hub Main Menu and System Configuration Menu.[...]

  • Page 89

    87 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 5.1.1 H UB M AIN M ENU When the Hub Advanced Setup screen appears, the main menu is displayed, giving access to the following sub-menus: 1. System Configuration Menus —The System Configuration menus contain items for setup of Wireless Ethernet Hub configuration parameters, such as station pa[...]

  • Page 90

    88 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 1.4 Station Control Menu 1.4.1 System Reset 1.4.2 Set Factory Defaults 1.4.3 Enable AppleTalk Tunneling 1.4.4 Positive Bridging 2. Maintenance Menus —These menus, which contain advanced system functionality and troubleshooting functions, are for technical support personnel only. 3. Testing M[...]

  • Page 91

    89 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 5.1.2 S YSTEM C ONFIGURATION M ENUS You can access all the items needed to configure your Wireless Ethernet Hub from the System Configuration menu. To access the System Configuration menu: • From the Main menu, type 1. The System Configuration menu appears. Use the following procedures to ma[...]

  • Page 92

    90 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 5.1.3 C URRENT S TATION P ARAMETERS • Station H/W Address —Displays the Wireless Ethernet product’s unique IEEE Address. • Number of Current Associations — This indicates how many stations are currently associated with this Hub. To access the Current Station Parameters: 1. From the S[...]

  • Page 93

    91 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 5-6. Terminal Screen Showing Current Station Parameters. 5.1.4 IP R ELATED I TEMS The Wireless Ethernet Hubs contain IP Host software. This software is used for testing the Hub (Ping), for management functions (SNMP), and for downloading files (TFTP). Every Hub needs an IP Address to be[...]

  • Page 94

    92 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES All addresses may be set using regular IP address notation (four bytes separated by periods), together with the subnet mask. To access a host belonging to a different subnet, the Wireless Ethernet Hubs send the traffic through the default IP gateway. The gateway IP address should also be speci[...]

  • Page 95

    93 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 5-7. Terminal Screen Showing IP Menu EthAirNet (Hub), Integration’s PC — $Revision: 1.144 $ , $Date: 03 Sep 1995 16:25:54 $ System Configuration ----------------------- 1 — Station Status 2 — IP related items. 3 — WLAN Parameters 4 — Station Control Select option > 2 EthA[...]

  • Page 96

    94 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 5-8. IP Addresses’ Current Values. To change one of the IP addresses: 1. In the selected sub-menu type in the IP address using the convention of 4 groups of 3 digits separated by dots. For example: 234.111.111.111.[...]

  • Page 97

    95 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 5.1.5 WLAN P ARAMETERS The WLAN Parameters Menu contains the following sub-menus: Hopping Sequence The hopping sequence is a parameter that is set for the Hub. The stations learn it from the Hub at the association process. Changing this parameter is useful when several Hubs are co-located. Thi[...]

  • Page 98

    96 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Operation Changes to this parameter will become effective from the next reset. Network ID The Network ID (also called ESS_ID) is an ASCII string used for identifying a Wireless LAN in order to prevent unintentional merging of two co-located Wireless LANs. It is the Network Manager’s responsi[...]

  • Page 99

    97 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Operation Changes to this parameter will become effective upon the next reset. Maximum Data Rate The Wireless Ethernet products can operate either at 1 Mbps, 2 Mbps or 3 Mbps. The station dynamically selects the highest possible rate for transmission. In certain conditions you may decide not t[...]

  • Page 100

    98 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Mobility Mode Wireless stations may be used in three different Mobility Modes: Mobile The station moves while operating in the network. Portable The station is sometimes moved but usually it operates from a static environment. Stationary The station does not move. The Wireless Ethernet station[...]

  • Page 101

    99 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES A mobile station, however, will continuously check for a better Hub, and try to roam to a better Hub even while the current received signal is clear and strong. Power Level Wireless Ethernet products can operate at either a “high” or a “low” power level. Transmit Diversity The Wireless[...]

  • Page 102

    100 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Using one antenna as opposed to a set of two may reduce the effective range due to multipath problems. For this reason the single 18 dBi and 24 dBi antennas are mounted on high rooftops where degradation of performance due to multipath problems is minimized. The main application of these high[...]

  • Page 103

    101 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES To set the Hub WLAN parameters: 1. From the System Configuration menu, type 3. The WLAN Parameters menu appears. Figure 5-9. WLAN Parameters Menu.[...]

  • Page 104

    102 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 2. From the WLAN Parameters menu select the required item as follows: Type 1 to set the Hopping Sequence. Type 2 to set the Network ID. Type 3 to set the Max Data Rate. Type 4 to set the Mobility. Type 5 to set the Power Level Type 6 to set the Transmit Diversity option. Type S to display the[...]

  • Page 105

    103 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Table 5-1. WLAN Parameters. Hopping Sequence 1 - 22 Network ID Enter up to 32 printable ASCII characters Max Data Rate Enter exactly 1 decimal digit Allowed range 1 -3 Mobility 0 = Stationary 1 = Portable 2 = Mobile Power Level 0 = Minimum power 1 = Maximum Power Transmit Diversity 0 = Intell[...]

  • Page 106

    104 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Figure 5-10. Current WLAN Parameters.[...]

  • Page 107

    105 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 5.1.6 S TATION C ONTROL M ENU The Station Control menu allows you to perform the following functions: System Reset This function resets the Hub and accepts any changes that you have made to the system parameters. Set Factory Defaults This function changes all the system parameters back to the[...]

  • Page 108

    106 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Positive Bridging You can select one of three bridge modes for the LW001A Hub: 0 = Positive Bridging Positive bridging allows transmission of packets only to stations that the LW001A knows to exist in the Wireless LAN behind the Wireless Bridge. 1 = Negative Bridging Negative bridging allows [...]

  • Page 109

    107 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES To access the Station Control menu: 1. From the System Configuration menu, select 4. The Station Control menu appears. Figure 5-11. Station Control Menu. Table 5-2. Station Control Menu Parameters. System Reset 0 = Cancel Request 1 = Reset System Set Factory Defaults 0 = Cancel Request 1 = Lo[...]

  • Page 110

    108 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES 5.2 Access Control Menu The Access Control menu allows the Network Administrator to limit access to the Advanced Setup menus to users in possession of the current Password. To reach the Access Control menu: From the Main menu select 4. The Access Control menu appears. Figure 5-12. Access Cont[...]

  • Page 111

    109 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Table 5-3. Access Control Menu Parameters. Change Access Rights Type in the Password Change User Password Type in the Password Change Access Rights Determines whether user has access rights to Advanced Setup Menus. Range Read-write or read only. Default Read-write (all permitted parameters ca[...]

  • Page 112

    110 3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES Change User Password Default Factory set as user Operation A new password can be entered by any user having access rights; however, a user attempting to enter an incorrect password will cause the access rights to be changed to Read Only. NOTE Make sure to keep a record of the current password[...]

  • Page 113

    1000 Park Drive • Lawrence, P A 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 1998. Black Box Corporation. All rights reserved.[...]