English dropdown-ico

Bosch Appliances A5 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Bosch Appliances A5, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Bosch Appliances A5 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Bosch Appliances A5. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Bosch Appliances A5 should contain:
- informations concerning technical data of Bosch Appliances A5
- name of the manufacturer and a year of construction of the Bosch Appliances A5 item
- rules of operation, control and maintenance of the Bosch Appliances A5 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Bosch Appliances A5 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Bosch Appliances A5, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Bosch Appliances service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Bosch Appliances A5.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Bosch Appliances A5 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    DiBos 610–4.998.137.176 V ersion: A5 Date: 1 1–2004 INST ALLA TION MANUAL[...]

  • Page 2

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 2 –[...]

  • Page 3

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 3 – Safety instructions Important Safeguards 1. Read, Follow , and Retain Instructions – All safety and operating instructions should be read and followed before operating the unit. Retain instructions for future reference. 2. Heed W arnings – Adhere to all warni[...]

  • Page 4

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 4 – Safety instructions (continued) 12. Grounding or Polarization – This unit may be equipped with a polarized alternating current line plug ( a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet in only one [...]

  • Page 5

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 5 – Safety instructions (continued) For Indoor Product 1. W ater and Moisture – Do not use this unit near water – for example, in a wet basement, in an unprotected outdoor installation, or in any area classified as a wet location. 2. Object and Liquid Entry – N[...]

  • Page 6

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 6 – Safety instructions (continued) Safety Precautions CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER VICEABLE P ARTS INSIDE. REFER SER VICING T O QUALIFIED SER- VICE PERSONNEL. T[...]

  • Page 7

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 7 – T ABLE OF CONTENTS Section Page 1 Introduction 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 System Description 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Uni[...]

  • Page 8

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 8 – T able of Contents (continued) Section Page 5 XP Administration 59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 Changing from video system to XP administrator level 59 . . . . . . . . . . . 5.2 Log on as Windows  XP u[...]

  • Page 9

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 9 – 1 Introduction 1.1 System Description The video system is a digital monitoring system with which video images ca n be saved on location in order to transmit and evaluate them anyplace you designate regardless of distance and location. The image data delivered by [...]

  • Page 10

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 10 – Introduction (continued) 1.3 Recommended Virus Scanners/Firewalls Windows  XP embedded is the operating system of the video system. The use of a virus scanner and a firewall is recommended. V irus Scanners Th e following virus scanners are approved for the vi[...]

  • Page 11

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 1 – Introduction (continued) 1.4 Component Overview System board VGA monitor 1. Grabber card MVTitan * Serial interface (COM1) Serial interface COM2 (placed in a free slot) 4x USB Printer 16 contact inputs 8 relay outputs or 7 relay outputs + 1 fault indicator SCSI[...]

  • Page 12

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 12 – Introduction (continued) 1.5 Laws/Norms/Guidelines Electromagnetic com- patibility (EMC) USA FCC Part 15, Class B EU EMC directive 89/336/EWG – Fault broadcast EN 61000–6–3 – Interference immunity DIN EN 50130–4 T o fulfill DIN EN 50130–4, DiBos must[...]

  • Page 13

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 13 – 2 Computer Slots Installation of the internal hardware components of the computer may only be per- formed by the video system manufacturer . Any field configuration changes to the internal hardware will void the system warranty . Rear view: 14 5 6 8 9 10 11 12 1[...]

  • Page 14

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 14 – 3 Quick installation For information about the device connections, please see Chapter 2. 1. Connect the mouse and keyboard (put ferrite on the cables). 2. Plug the 26–pin D–sub plug of the grabber cable on the corresponding plug of the grabber card. 3. Conne[...]

  • Page 15

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 15 – Quick installation (continued) Logon as administrator No. Name Description 1 Name Enter the name here. Y ou have to logon in the video system with this name in the future to oper- ate the system. The user given here receives administrator rights, i.e. rights wit[...]

  • Page 16

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 16 – Quick installation (continued) Display of the existing hardware The existing video hardware is displayed in this dialog box. No. Name Description 1 Grabber type: The built–in grabber type is displayed. Either MVTitan or MVSigma. Number of grabbers: The number [...]

  • Page 17

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 17 – Quick installation (continued) Changing the camera name Y ou can change the camera name in this dialog box. No. Name Description 1 Click on the camera whose name you wish to change. The selection is displayed in color . 2 Change camera name Click on Ch ang e cam[...]

  • Page 18

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 18 – Quick installation (continued) Select storage method Y ou can determine the following for each camera in this dialog box:  if a recording (storage of images) should take place and  how many images per camera should be displayed. The system automatically de[...]

  • Page 19

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 19 – Quick installation (continued) 3 Images per second Enter the number of images per second that are to be recorded in the Images per second box. Note: The system checks the plausibility of the config- ured recording rate here. 4 Next Click on Next to continue. Not[...]

  • Page 20

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 20 – Quick installation (continued) Select the drive for storage and finish Basic Configuration. In this dialog box, select the drive for storage of the image data. No. Name Description 1 The List field contains all hard drives and network drives known to the system [...]

  • Page 21

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 21 – Quick installation (continued) Note: When finishing Basic Configuration, the system proceeds according to the fol- lowing convention:  A ring archive is created for each camera (this can be overwritten).  Th e size of the archives is generated according to[...]

  • Page 22

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 22 – 4 Connections This section describes the following connections/installation:  Grabber card MVT itan/MVSigma  Ethernet/token ring  ISDN controller  Interface expansion card VSCom 200 H  SCSI controller  Monitor , keyboard, mouse  External har[...]

  • Page 23

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 23 – Connections (continued) 4.1 Grabber Card MVTitan (max. 2) May only be executed by authorized trained personnel! – S2–1 S2–2 S2–3 S2–4 – – J7 J8 – – – – – – – – – – – S2–5 S2–6 S2–7 S2–8 J5 J6 Connector J1 1 Connector J[...]

  • Page 24

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 24 – Connections (continued) J1 to J8 Position 1 –2 Relay contact N/O contact Position 4 –5 Common Position 2 –3 Relay contact N/C contact Position 5 – 6 not occupied S1, S2 off Input not terminated on T erminated with 75 Ohm (deliv- ery state) V ideo input t[...]

  • Page 25

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 25 – Connections (continued) 4.2 Grabber Card MVSigma May only be executed by authorized trained personnel! Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 MVSigma grabber card 9 1 26 19 10 18 Pin assignment Assignment Color BNC +12 V DC w ?[...]

  • Page 26

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 26 – Connections (continued) 4.3 Connection to a T oken Ring or Ethernet Network May only be executed by authorized trained personnel! In addition to the Ethernet connection on–board, there is an optional to- ken ring card available. Note: Only the card type Madge [...]

  • Page 27

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 27 – Connections (continued) Integration into a customer network with static assignment of IP ad- dresses (for Ethernet and token ring) Ask the system administrator for the IP and subnet address and proceed as follows: 1. Log on as the Administrator . 2. Adapt the TC[...]

  • Page 28

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 28 – Connections (continued) 4.4 Connecting the ISDN Controller May only be executed by authorized trained personnel! The ISDN connection is established via a supplied adapter cable (with W estern connector) to the S o interface of the computer . Note: Only use the c[...]

  • Page 29

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 29 – Connections (continued) 4.5 Connecting the VSCom 200 H (Interface Expansion) May only be executed by authorized trained personnel! Note: only use the VSCom 200 H PCI card. The interface expansion card is retrofitted as follows. 1. Switch of f the computer and in[...]

  • Page 30

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 30 – Connections (continued) 4.7 Connecting the Cameras Note that one input is needed per B&W and CCVS camera and two inputs per Y/C camera. 26–pin connector plug video system video system V1 V2 V8 V1 V2 V4 MVTitan MVTitan MVSigma 26–pin connector plug MVTita[...]

  • Page 31

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 31 – Connections (continued) 4.8 Connecting the V–DOG and T amper Contact May only be executed by authorized trained personnel! The module is used to monitor the tamper contact and power supply of the power unit. For signaling, a sounder can be connected. C2 C1 WD [...]

  • Page 32

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 32 – Connections (continued) 4.9 Connecting the Software Dongle and the Printer The programs are protected against unauthorized use by a dongle. The system cannot be operated without this dongle. The dongle must be con- nected to the PRN interface (LPT1) on the syste[...]

  • Page 33

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 33 – Connections (continued) 4.1 1 Connecting the A TM via the Interface Processor (Serial) A maximum of 4 automatic teller machines or three automatic teller ma- chines and 1 access control system can be connected to the video sys- tem via an interface processor . T[...]

  • Page 34

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 34 – Connections (continued)  Method 2: Problem: The automatic teller machines (A TMs) are located further away from the video system. The distance between the video system and interface processor and be- tween the interface processor and an A TM cannot be less th[...]

  • Page 35

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 35 – Connections (continued)  Method 3: Problem: The automatic teller machines (A TMs) are located further away from the video system. The distance between the video system and interface processor and be- tween the interface processor and an A TM cannot be less th[...]

  • Page 36

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 36 – Connections (continued) 4.12 Connecting the Barcode Reader 4.12.1 Barcode Reader V3300–N Only the barcode readers listed below should be used. With other types of barcode readers, you must check whether their protocol matches that of the video system. COM x vi[...]

  • Page 37

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 37 – Connections (continued)  Selecting communication protocol Use the default protocol. → see ”Communications Protocol” Section  Hide own device address The d evice a ddress m ust n ot b e t ransmitted b ecause i t i s n ot e valuated in the video system[...]

  • Page 38

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 38 – Connections (continued) 4.13 Connecting Foyer Card Reader MINITER RS 485 The foyer card reader MINITER RS 485 is connected via a serial inter- face. A maximum of four foyer card readers can be connected in series. Th e foyer card reader LS23M and the foyer card [...]

  • Page 39

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 39 – Connections (continued) Programming the foyer card reader MINITER RS 485 Programming is carried out using MINITER RS 485 software. This can be installed on a service laptop or on a video system. Proceed as follows: 1. Start the programming software and select RS[...]

  • Page 40

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 40 – Connections (continued) 7. Set dif ferent authorization for credit cards (track 2) and EC cards (track 3), so that access can be gained to the foyer card reader if the connection between the video system and the Miniter is interrupted (see operating instructions[...]

  • Page 41

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 41 – Connections (continued) 4.14 Connecting Radio Clock DCF 77 May only be executed by authorized trained personnel! The connection must be made to a serial interface. Note: Only the radio clock NeoClock DCF 77 should be used. COM x video system DCF 77 Radio clock R[...]

  • Page 42

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 42 – Connections (continued) 10. Make the following settings in the configuration menu: Language: ”German” Port: ”COM x” (interface in use) Synchronization: ”Automatic”. T ime lag: Select ”0” (hours) and ”Daylight saving time” License: Enter seria[...]

  • Page 43

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 43 – Connections (continued) 4.15 Web Connection for Access Via Browser May only be executed by authorized trained personnel! The master disk contains the preinstalled W eb application for accessing the image archive via the browser . The Web application needs port 8[...]

  • Page 44

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 44 – Connections (continued) 4.16 Connecting a Modem May only be executed by authorized trained personnel! Y ou must have administrator rights to carry out the following steps: 4.16.1 Selecting and Installing the Modem Notes for selecting the modem:  Internal PCI [...]

  • Page 45

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 45 – Connections (continued) Enable dial–in (if incoming calls should be accepted) 1. From the Windows  XP desktop, select ”Start → Control Panel”. 2. From the ”Control Panel” folder , select the ”Network Connections” icon. 3. In the ”Network Con[...]

  • Page 46

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 46 – Connections (continued) 4.17 Connecting AutoDome/SAE–Dome  Connecting AutoDome RS 232 RS 232/BiPhase converter COM x video system L TC 8780 or L TC 8786 BiPhase AutoDome L TC 8569 or L TC 8570 L TC matrix code merger BiPhase BiPhase Note: Additionally a cod[...]

  • Page 47

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 47 – Connections (continued)  Connecting SAE Dome directly RS 232 RS 232/RS 485 converter COM x video system i.e. LNL–108 A SAE Dome RS 485  Connecting SAE Dome with V3032 Biphase interface RS 232 RS 232/BiPhase converter COM x video system L TC 8780 or L TC [...]

  • Page 48

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 48 – Connections (continued) 4.18 Connecting a Security System 4.18.1 General remarks The video system is connected to a SecSys via an RS 232 interface at COM x, e. g. by connecting an interface converter OVS in between. RS 232 interface Interface converter Bosch Sec[...]

  • Page 49

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 49 – Connections (continued) Jumper assignment for interface converter OVS V ariant 1: 1 2 3 1 2 3 1 2 3 1 2 3 C3: Pin 2 = transmitter line Pin 3 = receiver line C3: Pin 2 = receiver line Pin 3 = transmitter line J2 J1 J2 J1 Connector ass ignment for OPTO Direction C[...]

  • Page 50

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 50 – Connections (continued) 4.18.2 Connecting to NZ 500 (20 mA) video system OVS SDI+ SDI– SDO+ SDO– C3 OPTO COM x 9 5 6 1 NZ 500 SU 500 Range max. 1000 m Only connect shield to NZ 500. Installation cable J–Y (St) Y 2x2x0,6 SU 500: J1 inserted (1200 bit/s) 4.1[...]

  • Page 51

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 51 – Connections (continued) 4.18.4 Connecting to AZ 1010/NZ 1008  V .24 Connection to AZ 1010/NZ 1008 AZ 1010/NZ 1008 SDI 0 V SDO 2 3 5 Connection to the AZ 1010/NZ 1008 must be programmed at the center SMA S 3A S 3B B2 B1 V1 1 2 3 Jumper V1 set to 2/3 Level for [...]

  • Page 52

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 52 – Connections (continued) 4.18.5 Connecting to NZ 1012  V .24 connection to NZ 1012 Dip–Fix switches (S) and jumpers (V) on SSM NZ 1012 EAN SSM ZSN S3 S2 S0 V4 V2 Software versions: 18508.0 A8.1 18508.1 A8.1 SDI 0 V SDO Note: Connection to interface 2 is poss[...]

  • Page 53

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 53 – Connections (continued) 4.18.6 Connecting to BZ 1012 (20 mA) BZ 1012 Range max. 1000 m SDI SDO GOM +24V SDI SDO EAB Insert SSM jumpers at ”20 mA”. OVS C3 OPTO 9 5 6 1 SDI– SDI+ SDO+ SDO– +UV COM x video system[...]

  • Page 54

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 54 – Connections (continued) 4.18.7 Connecting to NZ 1060  V .24 connection to NZ 1060 NZ 1060 ZAN SIE ZVE Software versions: 18033.0 A6.2 18033.2 A6.2 SDO 0 V SDI 2 3 5 18033.3 A6.2 V3 V1 Note: It is preferable to use interfaces 6 through 9, but connection to int[...]

  • Page 55

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 55 – Connections (continued) 4.18.8 Connecting to BZ 1060 (20 mA) BZ 1060 Range max. 1000 m SDI SDO GOM +24V SDI SDO ZAB It is preferable to use interfaces 6 through 9, but connection to interfaces 2 through 5 is also possible depending on the project. Program the ap[...]

  • Page 56

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 56 – Connections (continued) 4.18.9 Connecting to UEZ 1000 (20 mA) OVS SDI+ SDI– SDO+ SDO– C3 OPTO 9 5 6 1 UEZ 1000 AV K Range max. 1000 m Only connect shield to UEZ 1000. Installation cable J–Y (St) Y 2x2x0,6 20 mA–1 to 20 mA–3 COM x video system 4.18.10 C[...]

  • Page 57

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 57 – Connections (continued) 4.18.1 1 Connecting to UGM 2020  20 mA connection to UGM 2020 or TESP (by telephony) TESP SGK EPC/EPC2 Software versions: SGKUGM DLA0 DLB0 DLA1 DLB1 from EAPS–4 Jumper 1 – 4 open EAPS–5 OVS C3 OPTO 1 6 9 5 Range max. 1000 m UGM 2[...]

  • Page 58

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 58 – Connections (continued) 4.18.12 Connecting to Bosch D9000 Series D9133 SDI–B Common Bosch D9000 COM x video system 32 31 30 29 * See Note 3 * See Note 2 Power + SDI–A * See Note 1 SDI–B Common Power + SDI–A The video system is triggering in case of – U[...]

  • Page 59

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 59 – 5 XP Administration 5.1 Changing from video system to XP administrator level May only be executed by authorized personnel! Proceed as follows in order to change from the video system to the XP administrator level. 1. End the operating procedure in the video syst[...]

  • Page 60

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 60 – 6 Configuration If you are starting the video system for the first time, a dialog box appears with the following configuration possibility:  Basic configuration with the wizard The basic configuration is intended for inexperienced users. With the help of a se[...]

  • Page 61

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 61 – Configuration (continued) 6.2 Standard configuration (expert configuration) 6.2.1 Configuration Drives (Database/drives menu) This dialog box shows you an overview of the hard drives and network drives available. No. Name Description 1 The list box contains all [...]

  • Page 62

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 62 – Configuration (continued) Note: Several drives can be made available for archives. In this case, the archive images are evenly distributed amongst the acti- vated drives. Note: The external SCSI drives must be activated before starting up the PC.[...]

  • Page 63

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 63 – Configuration (continued) 6.2.2 Configuration Archives (Database/archives menu) The archives presented in the overview box are located on the activated drives. The archives partition the drives into individual areas so that the saved images can be found more qui[...]

  • Page 64

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 64 – Configuration (continued) 6 T ype Select an archive type. For most applications, it is advisable to set up a separate archive for each camera. This enables a fast search in the image archive later . Ring archive Ring archive : The images are saved one after the [...]

  • Page 65

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 65 – Configuration (continued) Used The available memory is indicated. If the total of all configured archives exceeds 90% of the entire avail- able memory , a message appears. A reserve of at least 10% must be remain. 8 Memory capacity System memory available 9 Acce[...]

  • Page 66

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 66 – Configuration (continued) 6.2.3 Configuration of hardware connections (Hardware/connections menu) Y ou can set–up numerous hardware options in this dialog box. Select the hard- ware either by clicking on the arrow pointing downwards and making the selec- tion [...]

  • Page 67

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 67 – Configuration (continued) 4 ISDN* When connecting to other systems of this type via ISDN 5 Network When connecting to other systems of this type via a network 6 Modem* For modem connections A RAS capable modem must be connected and RAS service must be installed.[...]

  • Page 68

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 68 – Configuration (continued) 6.2.4 Configuration of automatic teller machine (option) (Hardware/automatic teller machine menu) A maximum of 4 automatic teller machines each with 2 alarm inputs can be con- nected (must be activated under Hardware/Connections). These[...]

  • Page 69

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 69 – Configuration (continued) 6.2.5 Configuration of the foyer card reader inputs (option) (Hardware/foyer card reader/inputs menu) A m axi mum o f 4 f oyer c ar d r eaders c an b e c onnected, w ith e ach f oyer c ard r eader suppor ting one al arm input (m ust be [...]

  • Page 70

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 70 – Configuration (continued) 5 Foyer card reader time controlled Activate Foyer card reader time controlled and implement the following settings. 6 Default setting Click on the arrow pointing downwards in the De- fault setting list box and select the default set- t[...]

  • Page 71

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 71 – Configuration (continued) 6.2.6 Configuration of the foyer–card reader lockouts (option) (Hardware/foyer card reader/lockouts menu) In this dialog box it is possible to lockout certain bank routing codes, i.e. EC cards that correspond to the locked out entries[...]

  • Page 72

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 72 – Configuration (continued) Deleting lockouts No . Name Description 3 Locked bank reference numbers Select the lockout you wish to delete from the list box. 4 Delete Click on Delete . The lockout is deleted. 5 Accept Click on Accept . If you have made incorrect in[...]

  • Page 73

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 73 – Configuration (continued) 6.2.7 Configuration of barcode reader (option) (Hardware/barcode reader menu) Y ou can connect a barcode reader (must be activated under Hardware/Con- nections). The barcode reader supports the output of a scanner . This input, which is[...]

  • Page 74

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 74 – Configuration (continued) 6.2.8 Configuration of security system inputs for Bosch D9000 Series (option) (Hardware/SecSys inputs menu) The serial connection of a Bosch D9000 Series SecSys allows for many Sec- Sys inputs to be assigned to each video system input. [...]

  • Page 75

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 75 – Configuration (continued) 5 “Assignment of ad- dresses” dialog box Select the SecSys addresses that you would like to assign to the input and click OK . The address is assigned to the input. The address is not assigned to the input. 6 Accept Click on Accept [...]

  • Page 76

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 76 – Configuration (continued) 6.2.9 Configuration of security system inputs for Bosch alarm systems – excluding D9000 Series (option) (Hardware/SecSys inputs menu) The serial connection of a SecSys allows up to 16 input types to be defined which, when they occur ,[...]

  • Page 77

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 77 – Configuration (continued) 4 Line status Click on Assign , in the Line status column if you would like to change or view the standard assign- ment of the line status (only for LSN security sys- tems). 5 “Assignment of line sta- tuses” dialog box T o add line [...]

  • Page 78

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 78 – Configuration (continued) 6.2.10 Configuration of alarm simulation (Hardware/alarm simulation menu) Th e video system supports 4 alarm inputs, which can be simulated for triggering test alarms. Note: Function must be activated under Hardware/Connections. No. Nam[...]

  • Page 79

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 79 – Configuration (continued) 6.2.1 1 Configuration of virtual detectors (Hardware/virtual detector menu) The virtual detectors offer the same functionalities as the other detectors in the system. They provide inputs that can be used to carry out jobs in the video s[...]

  • Page 80

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 80 – Configuration (continued) Note: External software can communicate with the virtual detectors via a COM interface (COM stands for Component Object Model). For a simple connection, please see a type library (V irtualInputs.tlb) in the installation directory of the[...]

  • Page 81

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 81 – Configuration (continued) 6.2.12 Configuration of detector inputs (Hardware/Frame grabber/Detector menu With this dialog box you can activate and deactivate the contact inputs of the grabber card and select the stable state. A maximum of 8 or 16 contact inputs c[...]

  • Page 82

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 82 – Configuration (continued) 4 Open contact Determine whether the alarm input should be an open or closed contact. The input is an open contact. The input is a closed contact. 5 Accept Click on Accept . If you have made incorrect inputs, click on Reject and start o[...]

  • Page 83

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 83 – Configuration (continued) 6.2.13 Configuration of cameras (Hardware/Frame grabber/camera menu) With this dialog box you can select which camera you would like to activate and which camera type it should be. A maximum of 8 or 16 cameras can be connected to each M[...]

  • Page 84

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 84 – Configuration (continued) 4 Setup These settings can be set individually for each camera. They will remain saved until a change is carried out. Click on Setup to do the following: – change the image settings such as brightness, contrast, color and compression [...]

  • Page 85

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 85 – Configuration (continued) Image settings for all camera types Implement the setting for each camera as required. No. Name Description 1 Image settings Click on Image settings . 2 Image properties Set the brightness, contrast and color. Y ou can view the result o[...]

  • Page 86

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 86 – Configuration (continued) Set the monitoring area for the sensor camera (movement detection) Implement the setting for each camera as required. No. Name Description 1 Motion detection Click on Motion detection . The entire image content within the blue area is s[...]

  • Page 87

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 87 – Configuration (continued) 4 Sensitivity Change the sensitivity if the results of the movement detection are not satisfactory . high The sensitivity is higher; i.e. smaller texture changes (outlines, brightness, movement) are necessary to trigger an alarm. low Th[...]

  • Page 88

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 88 – Configuration (continued) Set dome cameras Implement the setting for each camera as required. No. Name Description 1 Dome settings Click on the Dome settings tab. Creating interface settings 2 Interface The settings for the interfaces have to be carried out firs[...]

  • Page 89

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 89 – Configuration (continued) Saving camera positions Y ou can set the positions of dome cameras to which you can automatically swivel time and time again. Users can quickly select these positions in the live image, provided they are authorized to do this. 3 This is[...]

  • Page 90

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 90 – Configuration (continued) Entering control commands via the command line Here using the command line you can specify different settings for dome cameras or matrixes that you can call up automatically again and again. For more information about which commands are[...]

  • Page 91

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 91 – Configuration (continued) 6.2.14 Configuring relays (Hardware/Frame grabber/Relays menu) A maximum of 4 or 8 relay outputs can be connected to each MVT itan grabber card. With the MVSigma grabber card, no relays can be connected. A maximum of 2 MVT itan can be i[...]

  • Page 92

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 92 – Configuration (continued) 6.2.15 Configuring IP cameras (Hardware/IP cameras menu) A maximum of 16 IP cameras (network cameras) can be connected. The IP cameras can also be connected to the available cameras through Frame grabber. Only those cameras with which J[...]

  • Page 93

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 93 – Configuration (continued) 4 Setup Click on Setup and implement the settings for each camera. Enter the following – Address (URL) of the camera under which JPEG images can be called up. Note: If you click on Display , you can check to see whether the URL entere[...]

  • Page 94

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 94 – Configuration (continued) 6.2.16 Configuring time periods (T ime periods menu) T o ensure that jobs are activated at specific times, you can define dif ferent times for specific events, such as triggering a save job at certain times. No. Name Description 1 New C[...]

  • Page 95

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 95 – Configuration (continued) 4 T ime interval The times (from ... to) for the selected weekdays, holidays and special dates can be entered here. New A new time can be entered. Edit An existing time can be changed. Delete Deletes the time periods of the selected day[...]

  • Page 96

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 96 – Configuration (continued) 6.2.17 Configuration of the ISDN connections (option) (Connections/ISDN menu) In this menu, define your own user station (local computer) and the remote stations so that you are able to establish a connection to a remote station when co[...]

  • Page 97

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 97 – Configuration (continued) 5 Incoming calls Activate the corresponding option .. only accept if in list of remote stations –if the system should check whether the calls are coming from a configured remote station. The connection is only made if they match. .. d[...]

  • Page 98

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 98 – Configuration (continued) 6.2.18 Configuring network connections (Connections/network menu) In this dialog box you can determine the video systems to which—via the network—a two–way connection should be connected. Note: Function must be activated under Har[...]

  • Page 99

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 99 – Configuration (continued) 5 Incoming calls Activate the corresponding option .. only accept if in list of remote stations – if the system should check whether the calls are coming from a configured remote station. The connection is only made if they match. .. [...]

  • Page 100

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 100 – Configuration (continued) 6.2.19 Configuring modem connections (Connections/modem menu) In this dialog box you can determine the video systems to which—via the modem—a two–way connection should be connected. In order to ensure that a configuration can be [...]

  • Page 101

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 101 – Configuration (continued) 4 Modem Select the connected modem in the Modem list box. 5 Password Click Password in order to change the RAS password for incoming calls. 6 Accept Click on Accept . If you have made incorrect inputs, click on Reject and start over .[...]

  • Page 102

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 102 – Configuration (continued) 6.2.20 Configuring storage job macros (Job macros/save menu) Job macros, e.g. saving images automatically (so–called storage job macros), define sequences (jobs) that should either run continuously or when an alarm is triggered. Thes[...]

  • Page 103

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 103 – Configuration (continued) 6 T otal duration Activate the corresponding option As long as input status unchanged – if recording (with possible pauses) should be repeated as long as the input status of the alarm input exists. Recording does not end until the in[...]

  • Page 104

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 104 – Configuration (continued) 6.2.21 Configuring alarm transmission job macro (Job macros/alarm transmission menu) Job macros define sequences (jobs) that should either run continuously or when an alarm is triggered. These jobs, which are only defined once, can the[...]

  • Page 105

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 105 – Configuration (continued) Configuring an alarm transmission job macro: No. Name Description 1 New Creates a new transmission job macro. Click on New and enter the name in the input box. 2 Delete Deletes an existing transmission job macro. Select a transmission [...]

  • Page 106

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 106 – Configuration (continued) 7 Authorization level Select the authorization level. This job macro will only be available to the user with the authorization level selected. Note: The name and connection password for the authorization level (from the User management[...]

  • Page 107

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 107 – Configuration (continued) 6.2.22 Configuring backup job macro (Job macros/backup menu) Job macros define sequences (jobs) that should either run continuously or when an alarm is triggered. These jobs, which are only defined once, can then be used for variable a[...]

  • Page 108

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 108 – Configuration (continued) Configuring a backup job macro: No. Name Description 1 New Creates a new backup job macro. Click on New and enter the name in the input box. 2 Delete Deletes an existing backup job macro. Select a backup job macro in the list box and c[...]

  • Page 109

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 109 – Configuration (continued) 6.2.23 Configuration of job activations (Job activations menu) Any number of system reactions for the alarm inputs can be specified in this menu. A job activation is absolutely necessary in order to ensure that camera images are saved.[...]

  • Page 110

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 10 – Configuration (continued) 6 T rigger Select the triggering criteria that are to trigger the job activation. Alarm The job is activated as soon as the alarm input is triggered. Stby The job is activated as long as the input is in standby mode. Can be used for h[...]

  • Page 111

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 1 1 – Configuration (continued) 13 Priority Determine the priority of the job. Priority 1 (high) to priority 5 (low). Note: A priority can only be specified in connection with a job macro. 14 Accept Click on Accept . If you have made incorrect inputs, click on Reje[...]

  • Page 112

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 12 – Configuration (continued) 6.2.24 Configuration of authorization levels (User management/authorization levels menu) Y ou can create dif ferent authorization groups in this menu if you have adminis- trator rights. These so–called authorization levels enable yo[...]

  • Page 113

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 13 – Configuration (continued) 4 Outp Dome Activate the check boxes of those elements (cameras, relays) that are to be avail able for the person with this authoriz ation level. In the case of dome cameras, a 2nd column with a check box is also displa yed. The check[...]

  • Page 114

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 14 – Configuration (continued) 6.2.25 Configuration of the users (User management/user menu) T o protect access to system components and data, operating procedures can only be carried out by logged–on users. Each user is assigned an authorization level for the wo[...]

  • Page 115

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 15 – Configuration (continued) 5 Dual authorization Activate the function when the user is only allowed to login to the system together with another user . 6 Accept Click on Accept . If you have made incorrect in- puts, click on Reject and start over . Note: There [...]

  • Page 116

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 16 – Configuration (continued) 6.2.26 Configuration of options (Settings/options menu) This dialog box enables you to implement optional settings for the live image, the image archive and for an automatic disconnection. No. Name Description 1 Live image window and [...]

  • Page 117

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 17 – Configuration (continued) 6.2.27 Configuration of security settings (Settings/security menu) Y ou have the option of implementing security settings in this dialog box, e.g. browser access, or encoding for network connections. No . Name Description 1 All author[...]

  • Page 118

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 18 – Configuration (continued) 4 Key management for unique key This item is only to be carried out if you want to use a unique key . New – Generating a unique key: Click on New and enter a name for the encod- ing. Click on OK to confirm. W arning: The current enc[...]

  • Page 119

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 19 – Configuration (continued) 6.2.28 Configuration of audio signals (Settings/audio signals menu) In this dialog box, you can allocate dif ferent audio signals to incoming mes- sages from network / modem and ISDN connections. This gives you a dif ferenti - ation o[...]

  • Page 120

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 120 – Configuration (continued) Deleting an audio signal: No. Name Description 1 Incoming connections Select the connection whose audio signal you wish to delete. 3 Reference The wav file is displayed to you in the Reference text box located there. 4 Delete Click on [...]

  • Page 121

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 121 – Configuration (continued) 6.2.29 Configuration of the dongle (Settings/dongle menu) In this dialog field, you can see the serial and job numbers, the approved sys- tem performance features and the approved status of the hardware dongle and the hardware dongle e[...]

  • Page 122

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 122 – Configuration (continued) 6.2.30 Administration configuration (Administration menu) This dialog box contains the following options: No. Name Description 1 Configuration data Save The configuration can be saved on the network drive or data medium. Note: For secu[...]

  • Page 123

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 123 – Configuration (continued) 4 Upload of the holiday program Y ou have the option here to adapt the holidays for the time program according to specific countries. The adjustment must be made in the Holidays.xml file. Upload Click on Upload and answer the warning m[...]

  • Page 124

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 124 – 7 Startup Proceed as follows to start up the computer: Switch on the PC Check ISDN connection Check grabber driver Program system, perform system test Storing reference images Connecting the System Components Activating External Hard Disks Change computer name [...]

  • Page 125

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 125 – Startup (continued) 7.1 Connecting the System Components See Section 4. 7.2 Activating External Hard Disks External hard disks must be activated before starting up the PC. 7.3 Switching On the PC (Startup) 1. Switch on the computer and the monitor . The compute[...]

  • Page 126

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 126 – Startup (continued) 7.5 Checking the Optional Network Connection Networking details The following details are required from the network operator for starting up and checking the network:  IP address  Subnet mask  (Gateway) Notes for checking the networ[...]

  • Page 127

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 127 – Startup (continued) 7.6 Checking the Grabber Driver Make sure the grabber driver has started. 1. Start up your computer as far as the live image. 2. Exit the video system as the Administrator . 3. Select ”Start → Control Panel” and click ”Sounds, Speech[...]

  • Page 128

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 128 – Startup (continued) 7.8 Checking the Optional A TM Connection The data telegram between the video system and A TM can be checked using the ”Hyper T erminal” program in Windows  XP .  Start the program via the ”Start → All Programs → Accessories [...]

  • Page 129

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 129 – Startup (continued) 7.9 Checking the Optional W eb Connection Check whether access can be obtained after activating the web applica- tion whether access can actually occur . Proceed as follows: 1. Start the web browser (Internet Explorer 5.x and later or Netsca[...]

  • Page 130

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 130 – 8 Fault Indication/Correction This section contains notes on faults that may occur when first starting up or during operation. If you cannot determine the cause of the fault, please contact ”Product Service V ideo” of the video system manufacturer . Fault P[...]

  • Page 131

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 131 – 9 Maintenance and Service 9.1 Maintenance T asks to be Carried Out Perform the following maintenance tasks:  On the video system itself: – Check all cable connections are secure – Check the fan and clean it if necessary – Clean the screen if it is dirt[...]

  • Page 132

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 132 – Maintenance and Service (continued) Attention: All work carried out on the system that can interfere with recording may only be carried out after consulting the customer . With regard to UVV–re- lated equipment (UVV = German for Accident Prevention Regulation[...]

  • Page 133

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 133 – Maintenance and Service (continued) 9.3 Error Forwarding Three methods are pre–configured and provided as examples. The ”er- ror_forwarding.cmd” file contains calls for all methods. ”error_forwarding.cmd”: With ”net send”: rem Send messages to oth[...]

  • Page 134

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 134 – Maintenance and Service (continued) 9.3.3 Sending an SMS If the computer is connected via an ISDN or analog modem with the tele- phone network, an SMS can be sent (not possible with T–DSL). T o activate this method, ”rem” must be removed from the followin[...]

  • Page 135

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 135 – Maintenance and Service (continued) 9.4 T roubleshooting The following faults have to be rectified if necessary:  Counter light If recordings show impairment due to counter light, either block out the light source, e.g. through curtains on windows or shades [...]

  • Page 136

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 136 – 10 T echnical data V ideo System in 19” Housing Operating system Windows  XP Hard disk 120 GB minimum RAM 256 MB DDR V ideo AGP (on–board) Network Ethernet (on–board) Sound on–board Connections (on rear) see Section 2 Expansion slots From left to rig[...]

  • Page 137

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 137 – T echnical Data (continued) Grabber card MVTitan max. 2x V ideo inputs 16 Contact inputs 16 (either N/C contact or N/O contact) Relay outputs 8 (or 7x output and 1x fault indicator for 1st grabber card) Compression rate Can be set between 10 ... 30 Kbytes Image[...]

  • Page 138

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 138 – 1 1 End user license agreement (EULA) Y ou have acquired a device (DiBos) that includes software licensed by Bosch Secu- rity Systems from Microsoft Licensing Inc. or it’ s affiliates (”MS”). Those installed software products of MS origin, as well as asso[...]

  • Page 139

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 139 – End user license agreement (continued)  Limitations on Reverse Engineering, Decompilation, and Disassembly . Y ou may not reverse engineer , decompile, or disassemble the SOFTW ARE, except and only to the extent that such activity is expressly permitted by a[...]

  • Page 140

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 140 – Notes[...]

  • Page 141

    Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 141 – Notes[...]

  • Page 142

    610–4.998.137.176 V ersion: A5 Date: 1 1–2004 Bosch Security Systems,Inc. 850 Greenfield Road Lancaster , P A 17601 U.S.A. T el: 800–326–3270 Fax: 1–717–735–6560 Bosch Security Systems B.V . P .O. Box 80002, 5600 JB Eindhoven The Netherlands T el: 31 40 278 1222 Fax: 31 40 278 6668 Bosch Security Systems Pte Ltd 38C, Jalan Pemimpin Si[...]