English dropdown-ico

Bosch Appliances LTC 8600 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Bosch Appliances LTC 8600, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Bosch Appliances LTC 8600 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Bosch Appliances LTC 8600. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Bosch Appliances LTC 8600 should contain:
- informations concerning technical data of Bosch Appliances LTC 8600
- name of the manufacturer and a year of construction of the Bosch Appliances LTC 8600 item
- rules of operation, control and maintenance of the Bosch Appliances LTC 8600 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Bosch Appliances LTC 8600 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Bosch Appliances LTC 8600, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Bosch Appliances service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Bosch Appliances LTC 8600.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Bosch Appliances LTC 8600 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    EN Instructio n Manua l Allegiant Microproce ssor - based Vi deo Switcher/Con- tro l Sy stem s CPU F irmwar e Ve r s i o n 1 0 . 0 L T C 8600, L T C 8800 Ser ies[...]

  • Page 2

    [...]

  • Page 3

    L TC 8600 | L T C 8800 Series | en iii Bosch Security Systems, Inc. Instruct ion Manual F .01U.127.393 | 2.0 | 2009.03 T able of Contents 1 Safety ............................................... ........................................................ ................ .............................. 1 2 Unpacking ....................................[...]

  • Page 4

    iv en | L TC 8600 | L T C 8800 Series F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 8 Installation Procedure ................................................. ........................................................ ................ 28 8.1 Main CPU Bay Installation ........... .......................................[...]

  • Page 5

    L TC 8600 | L T C 8800 Series | en v Bosch Security Systems, Inc. Instruct ion Manual F .01U.127.393 | 2.0 | 2009.03 14 Factory Default Settings ....... ............................................. ................................................ .................. 50 14.1 User Selectable DIP Switch Settings for Main CPU Bay ................. ....[...]

  • Page 6

    vi en | L TC 8600 | L T C 8800 Series F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 19 Maintenance Information ................................ ......................................................... ............ ............... 83 19.1 Cleaning the Keyboard ........................................................[...]

  • Page 7

    L TC 8600 | L T C 8800 Series | 1 Bosch Security Systems, Inc. Instruct ion Manual F .01U.127.393 | 2.0 | 2009.03 1S a f e t y Impor tant Safety In structions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning [...]

  • Page 8

    2 | L TC 8600 | L T C 8800 Series F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 11. Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconne ct the power from the cable to be installed into the unit. – For battery powered units, refe r to th[...]

  • Page 9

    L TC 8600 | L T C 8800 Series | 3 Bosch Security Systems, Inc. Instruct ion Manual F .01U.127.393 | 2.0 | 2009.03 Safety Precautions Impor tant N otices Accessories - Do not place this unit on an unstable s tand, tripod, bracket, or mount. The unit may fall, causing serious injury and/or serious damage to the unit. Use only with the cart, stand, tr[...]

  • Page 10

    4 | L TC 8600 | L T C 8800 Series F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. – Disconnect the unit's input connectors fr om outdoor equipment before disconnecting the grounding plug or grounding terminal. – Follow proper safety precautions such as gr ounding for any outdoor device connected to this unit.[...]

  • Page 11

    L TC 8600 | L T C 8800 Series | 5 Bosch Security Systems, Inc. Instruct ion Manual F .01U.127.393 | 2.0 | 2009.03 Power lines - Do not locate the camera near overhe ad power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights. SELV All the input/output ports are Safety Extra Low Vo ltage (SELV[...]

  • Page 12

    6 | L TC 8600 | L T C 8800 Series F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. destinées à fournir une protection raisonn abl e contre les interférences nuisibles quand l'appareil est utilisé dans une installation comm e rciale. Cette appareil génère, utilise et émet de l'energie de fréquence radi[...]

  • Page 13

    L TC 8600 | L T C 8800 Series | 7 Bosch Security Systems, Inc. Instruct ion Manual F .01U.127.393 | 2.0 | 2009.03 Cust omer Suppor t and Ser vice If this unit needs service, contact the near est Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers USA Repair Center Telephone: 800-566-2283 Fax:[...]

  • Page 14

    8 | L TC 8600 | L T C 8800 Series F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc.[...]

  • Page 15

    L TC 8600 | L TC 8800 Series en | 9 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 2U n p a c k i n g This equipment should be unpack ed and handled with care. If an item appears t o have been damaged in shipment , notify the shipper . Verify that all parts shown in the Par ts List have been included. If an y items [...]

  • Page 16

    10 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 3S e r v i c e If the unit needs repair , con tact the nearest Bosch Security Sys tems Service Center for auth orization to r e turn and shipping instr uctions. Ser vice Centers •U S A • Repair Cent er T elephone: 800-566-2283 F [...]

  • Page 17

    L TC 8600 | L TC 8800 Series en | 11 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 4D e s c r i p t i o n These Allegiant video switcher/control syst ems combine both switching and com- puter t echnology to provide pow er ful per formance and unique syst em features for the security user . Of fering full matrix swi[...]

  • Page 18

    12 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 syst em par ame ters, program camera sequences, install loc kouts, and acce ss the advanced alarm handling screens with speed and ef ficiency. The programmed inf or - mation may then be transf erred int o the Allegiant syst em, stor [...]

  • Page 19

    L TC 8600 | L TC 8800 Series en | 13 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 5A l l e g i a n t F e a t u r e S u m m a r y T a b l e These Allegiant Series systems ar e available in two (2) operating configur ations: a base syst em and the base syst em with an op tional PC based software package. The base sy[...]

  • Page 20

    14 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 In addition, these syst ems provide the capa bility t o control on-sit e receiver/driver units and the Aut oDome Series of int egral pan/tilt/zoom/cameras. These syst ems contain a logging printer ou tput port, so an ine xpensive RS-[...]

  • Page 21

    L TC 8600 | L TC 8800 Series en | 15 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 6S y s t e m C o m p o n e n t s 6.1 L T C 8601 Ser ies Syst ems • L TC 8601 Series Main CPU Ba y A modular equipment bay which contains the syst em's microprocessor module (L TC 8610/01), the power supply module (L T C 8805 S[...]

  • Page 22

    16 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 • L TC 8801 Main Bay: Up t o eight (8) video input modules; 32 in puts per module. Up t o eight (8) video output modules; f our (4) outputs per module. Subto tal: 256 inputs and 32 outputs on main bay . • Monitor Expansion Ba y: [...]

  • Page 23

    L TC 8600 | L TC 8800 Series en | 17 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 7 Syst em Accessor y Com ponents The Allegiant Series accessor y products pro vide many optional f eatures t o the base syst em. A brief description of accessor y products is pro vided below . Complete specification information can b[...]

  • Page 24

    18 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 7.5 L T C 8555 Ser ies K eyboards The L TC 8555 Series ke yboards are compact , full function keyboar ds for use with Allegiant Series matrix switchers. LED read outs display real time sy stem status information. In cludes variable s[...]

  • Page 25

    L TC 8600 | L TC 8800 Series en | 19 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 7.10 L T C 8569, L TC 8570, L T C 8571, L TC 8572 Series Code Merger Uni ts These series are contr ol code merger and line driver units used to combine Allegiant biphase control code from two (up t o four with L TC 8570 and L TC 8572[...]

  • Page 26

    20 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 7.15 L T C 8780 Seri es Data Conv er ter Units The L TC 8780 Series ar e accessor y units that convert the Allegiant syst em's biphase control code int o RS-232, or conver ts RS-232 back t o biphase code. This provides the capab[...]

  • Page 27

    L TC 8600 | L TC 8800 Series en | 21 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 7.19 L T C 8782 Seri es Code T ranslator Units The L TC 8782 Series code translat ors are accessory units that convert biphase code to o ther manufacturers’ control code s, or convert other manufacturers’ code s to biphase. Man y[...]

  • Page 28

    22 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 7.23.1 Int egration Ser ver The Integration Ser ver is a versatile soft ware package used t o integrat e multiple syst ems tha t are not or dinarily compatible with each other . These syst ems can include video switchers, point of sa[...]

  • Page 29

    L TC 8600 | L TC 8800 Series en | 23 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 7.24 L T C 8506/00 PC-to-Console P o r t RS-232 Cable The L TC 8506/00 is an RS-232 grade cable wit h 9-pin D-connectors on eac h end that is used to connect an Allegiant's syst em's console por t to a standard PC COM por t[...]

  • Page 30

    24 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 L TC 8600 Series Video Switching Syst e m F igure 1: L TC 8600 Series Basic Video Switching Conf iguration Maximum of 16 Allegiant Ke y boards, up to 1.5 km (5000 ft) away using Optional Remote Hookup Kit Main CPU Bay Supports up to [...]

  • Page 31

    L TC 8600 | L TC 8800 Series en | 25 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. L TC 8800 Series Single Bay Sy stem (256 by 32 Configuration) F igure 2: L TC 8800 Series Single Bay Video Switching Configuration Main CP U Bay Supports up to 32 Monitor Out- puts Maximum of 32 Allegiant Ke yboards, up to 1.5 km (50[...]

  • Page 32

    26 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 L TC 8800 Series Du al Bay Syst em (256 by 64 Configuration) F igure 3: L T C 8800 Series Dual Ba y Video Switching Confi guration Supports up to 256 Video Inputs Coax Ribbon Jumper Cables Supplie d Supports up to 64 Monitor Outputs [...]

  • Page 33

    L TC 8600 | L TC 8800 Series en | 27 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. L TC 8800 Series F ull Capacity Conf iguration F igure 4: L TC 8800 Series F ull Capacity V ideo Switching Conf iguration T ypical AutoDome Camera Optional L TC 8859 MCS or GUI Soft- ware Package can be Run on IBM or IBM Compatible C[...]

  • Page 34

    28 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 8 Installati on Proce dure 8.1 Main CPU Bay Installation Befor e discarding the shipping car tons, ve rify that the various pieces of equipment have no e vidence of carrier damage. CAUTION Do not appl y pow er to the eq uipment until[...]

  • Page 35

    L TC 8600 | L TC 8800 Series en | 29 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. being used, the modules should be inserted in a left-to-right manner so that the low er camera numbers are used f irst . F igure 5: T yp ical V ide o Input Mo dule I nser ti on The VIMs are identical and are inter changeable within t[...]

  • Page 36

    30 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 F igure 7 : T ypical C PU Mod ule Inser tion If an L TC 8802 Series Monit or Expan s ion is supplied, it will contain an L TC 8816/01 Data Receiving Module in this slot . Install the main bay CPU or data receiver module at this time.[...]

  • Page 37

    L TC 8600 | L TC 8800 Series en | 31 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. eras, numbers 97 through 128) should be at tached to the main ba y conne ct ors labeled “ VIDEO 97 -112” and “ VIDEO 113-128.” Extra connect ors are prov ided on the main bay f or “looping” purposes. I f camera inputs are[...]

  • Page 38

    32 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 8.6.1 L TC 8600 Series or L TC 8800 Se rie s Video Inpu t T erminations Each VIM card f or an L TC 8600 Series or an L TC 8800 Series syst em has DIP switches f or selecting the termination of each individual video line. T o terminat[...]

  • Page 39

    L TC 8600 | L TC 8800 Series en | 33 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 8.6.3 L TC 8802 Series Monit or Ex pansion Bay Data Connections The L TC 8802 Series Monitor Expansion Ba y is supplied with a 1 m (3 f t) data com- munication interconnect cable. Install this cable between the Comm1 port on the L TC[...]

  • Page 40

    34 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 9 Op t ional Accessori es Installati on 9.1 G ener al Accessor y Install ation There are many accessory products availabl e for the Allegiant Series, including key- boards, alarm int er face units, control code signal distribution un[...]

  • Page 41

    L TC 8600 | L TC 8800 Series en | 35 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 1. If using an Allegiant sof tware pac kage, at tach the PC security ke y provided with the software to an available port on the computer . The supplied interconnect cable utilizes a custom pinout . If it ever becomes necessar y to r[...]

  • Page 42

    36 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 10 Sat elli t e Conf i gurati on Instal lations Due to the man y var iations possible, only general guidelines can be cover ed for installing satellit e systems. Ref er to th e Appendix Section of this manual, the L TC 8850/00 GUI So[...]

  • Page 43

    L TC 8600 | L TC 8800 Series en | 37 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 10.2 Main Site “T runk Line” V ideo I nputs At the main site, video trunk line connect ions coming from each of the re mot e site(s) should be connect ed (and proper ly terminat ed) using an available video input at the main ba y[...]

  • Page 44

    38 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 F igu re 11: Satelli te Site Sample Program Showing Logical Camera Nu mbers and Ti tles T o maintain a sense of order , it is preferable t o program a sat ellite f or a r ange of camera numbers. F or ex ample, in a thr ee (3) Allegia[...]

  • Page 45

    L TC 8600 | L TC 8800 Series en | 39 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. F igure 12: Main Site Sample Program Sho wing Local Cameras, T runk Lin es and Remote Cam- eras NO TE Either a local camera, or a remot e camera programmed with a local title, will need to be select ed to view certain on-screen promp[...]

  • Page 46

    40 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 10.6 Special Programming for “Cascaded” Sat elli te Sy stem Configurations In a 3-tier cascaded satellite sy stem, it is highly recommended for the sys tem design to hav e more trunks lines between the inte rmediat e master/sat e[...]

  • Page 47

    L TC 8600 | L TC 8800 Series en | 41 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 10.7 Ala rm Input s in Sate llit e Sys t ems Any alarm inputs t o the main site, whic h have be en programmed t o activate cameras located at sat ellite s, will operate normally e xcept when limited b y the number of trunk lines avai[...]

  • Page 48

    42 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 11 F eature Sel ection Cer tain user -selectable features can pro vid e enhanced Allegiant syst em operation capabilities. Any de sired change s can be made now or delayed until specific system requirement s become more apparent . Re[...]

  • Page 49

    L TC 8600 | L TC 8800 Series en | 43 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 1 2 Ma i n Powe r C o n n e c t i o n s 1. At tach the supplied AC pow er cord(s) be tween the bay(s) and appropriat e AC power sou rce. V erify that pow e r supply is configured for de sired v oltage input . If necessar y , instruct[...]

  • Page 50

    44 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 F igure 15: L TC 8808/00 Video Interconnect Pa nel F igure 16: L TC 8801 Series Main CPU Bay Rear P anel F igure 17: L TC 8802 Series Monitor Expansion Rear Panel C ONS OLE A LA R M P R INT E R S D A C OMM P OR T 2 A UX IL IA R Y[...]

  • Page 51

    L TC 8600 | L TC 8800 Series en | 45 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 13 V ideo Monitor Display The Allegiant Series syst e ms featur e an integral t ext overla y with two or three ro ws of 24 characte rs each. There ar e over 2000 differ ent charact ers that can be dis- play ed. See Chapter 20, “Cha[...]

  • Page 52

    46 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 13.2 Monit or Titl e/Syst em S tatus Display The monitor title/sy stem status di splay area is a 12-column displa y to the right of th e c a m e r a n u m b e r. I t i s u n i q u e o n e a c h o f the monitors. It has different uses[...]

  • Page 53

    L TC 8600 | L TC 8800 Series en | 47 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. Location 6 is also used t o indicate the sequencing direction when alarms occur . One of four of the f ollowing charac ter combinations will be displa yed: a. ^ R indicate s the alarms are sequencing in a f or ward direction. b. R V [...]

  • Page 54

    48 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 13.2.10 Location 12 - Sequ ence S tatus Indication This location indicates th e status of the sequence “active” in the monit o r . There are four possible c haracter combinations: a. ^ R indicates t he current sequence is sequenc[...]

  • Page 55

    L TC 8600 | L TC 8800 Series en | 49 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 13.6 Camera Number The left-most display on the top line sho ws the camera number . This number is gen- erated b y the syst em and is always displa yed. Each numbe r is un ique a nd ident if ies this camera when using the ke yboard f[...]

  • Page 56

    50 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 14 F actor y Default Set tings As the Allegiant system is shipped from the factory, cer tain featur es are placed in a default configuration. The installer can selec t some of these fe atures at the time of syst em installation/conf [...]

  • Page 57

    L TC 8600 | L TC 8800 Series en | 51 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 14.1.2 Middle CPU DIP Switch S2 The middle DIP switch provides se veral user -selectable options. These options are as fo llow s: • Switch 1 of S2 This switch is not used in these syst ems and s hould be left OFF . • Switch 2 of [...]

  • Page 58

    52 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 For ref erence, the follo wing table lists the Allegiant Series k eyboard models and the prot ocol suppor ted by eac h: • Switch 4 of S2 This switch allow s the printer port on the rear of the main Allegiant bay t o be configured a[...]

  • Page 59

    L TC 8600 | L TC 8800 Series en | 53 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. • Switch 6 of S2 This swi tch is curr ently not use d and shou ld be left OFF . • Switch 7 of S2 This switch controls the sy st em ke yboard polling mode. When switch 7 is ON (factor y def ault), the CPU comm unica tes with all s[...]

  • Page 60

    54 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 14.2 User Selectable DIP Swi tch Se t t ings for L TC 8816/00 Data Receiver Modules used in L T C 8802 Ser ies Monitor Expansion Bay s NO TE Af ter changing an y of the following switc hes, the syst em must be powered off and on usin[...]

  • Page 61

    L TC 8600 | L TC 8800 Series en | 55 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 14.2.2 Middle Data Receiver DIP Switc h S2 The lower DIP switc h pro vides cer tain user -selectable options. These options are as follo ws: • Switch 1 of S2 This switch is reser ved and should be left OFF . • Switch 2 and Switch[...]

  • Page 62

    56 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 15 User Information 15.1 User Pr iority Lev els There are eight (8) levels of user priority in the Allegiant syst em. Each of the 32 users in the Allegiant syst em has a default priority level assignment . These user lev- els determi[...]

  • Page 63

    L TC 8600 | L TC 8800 Series en | 57 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. word can be changed using the k eyboard (see User F unc tion number 10). Refer to the specific section of the operation instr uctions for ex act procedures of using ke y - board User F unctions. Although the table indicat es 32 possi[...]

  • Page 64

    58 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 16 Alar m Informat ion 16.1 G en eral The ability t o automaticall y switch video in re sponse to an e xternal signal (usually a contact closure) is a necessary feature in any video switching syst em. The Allegiant syst em permits us[...]

  • Page 65

    L TC 8600 | L TC 8800 Series en | 59 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 16.5 Alar m Activa te d Pre-posi ti on Alarm activate d pre-position capability exists in each of the three (3) ala rm response modes. This enables a pan/til t/zoom equippe d camera to aut omatically position itself to a prepr ogramm[...]

  • Page 66

    60 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 Sequence & Displa y Mode In the Sequence & Display mode alarm r esponse mode, a monitor pair is used t o display alarmed video. Display Monitor Sequence Monit or Monitor Actions K eyboard Operator Action 1st Alarm Occurs D = [...]

  • Page 67

    L TC 8600 | L TC 8800 Series en | 61 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 16.7 Alarm Rela y Respons e Allegiant alarm responses include the ability to trigger isolated alarm rela y outputs from an L TC 8540/00 Alarm Int er face unit . An alarm output is typically used to acti- vate the alarm input of a sec[...]

  • Page 68

    62 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 17 K eyboard Operat ion 17.1 G en eral Primar y operation of an Allegiant switcher is controlle d via the syst em keyboar d. The two types of k eyboard s currently available ar e: • Conventional L TC 8555 Series (incorporates LEDs [...]

  • Page 69

    L TC 8600 | L TC 8800 Series en | 63 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 17.2.2 K eyboard L og-off Procedure If the log-in feature has no t been enabled, th is action is not applicable. If the featur e has been enabled, press: User Log-of f [ User , then OFF ]. Any priority based r emot e c ontrol or moni[...]

  • Page 70

    64 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 17.4.3 Lock or Unloc k Control of a Monitor • When using IntuiK ey k eyboards, press [ Device Lockout] , located on t he main Allegiant menu screen f or these options. • With L TC 8555 Series k eyboards, press [Monitor], [Lock] ,[...]

  • Page 71

    L TC 8600 | L TC 8800 Series en | 65 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. With the Aut oDome Series of cameras, auxiliar y commands are used t o activate/ deactivate certain operational feature s/f unctions. Refer t o the Aut oDome camera manual for com p lete inf ormation on features supported by t he mod[...]

  • Page 72

    66 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 17.5.2 Arm/Disarm All Alar ms Press [ Alarm Control] , locat ed on the main Allegiant menu screen to ent er the menu screen containing these options. When using the IntuiK ey ke yboard: • T o ar m all alarms currently controlle d o[...]

  • Page 73

    L TC 8600 | L TC 8800 Series en | 67 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 17.6.2 Run a Sequence T o run a sequence currently loaded on a monit or , press S tart Sequence [Run] . If the sequence is stopped, the command starts sequencin g. Direction of the sequencing is indicated in the monit or sta tus disp[...]

  • Page 74

    68 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 17.7 Sequence Programm ing 17.7.1 Programming a Simple Camera Seq uence The Allegiant syst em has powerful sequencing capabilities. Usin g a syst em key- board, it is possible to ent er sequences to run on a single or on multiple mon[...]

  • Page 75

    L TC 8600 | L TC 8800 Series en | 69 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. mode, press Exit/Save [P rog] . Press Exit/Run [Run] , t o exit the programming mode, stor e the sequence into memory, and start the sequence running. The switcher steps thr ough the five (5) steps in the order shown, and repeats the[...]

  • Page 76

    70 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 17.7.2 Programming a SalvoSwitching Camera Sequence A SalvoSwitching sequence can be used to switch a group of monit ors simultane- ously as a synchronized group. T o prog ram a Salv o sequence, ent er the pr ogram- ming mode as desc[...]

  • Page 77

    L TC 8600 | L TC 8800 Series en | 71 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 18 K e yboard User F uncti ons 18.1 G eneral Information User functions are keyboard operations which are used infrequently , but provide important system options. NO TE: Cer tain functions are re stricte d to certain user priority l[...]

  • Page 78

    72 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 These functions are listed in the table sho wn below . Fn# Joy stick Up/Down Joy stick Left/Right Function Description Pass- word Re. Access Level 12 - 7 8 1 n/a n/a Local k eyboard t est Y Y Y 2 n/a n/a Show ke ybo ard por t number [...]

  • Page 79

    L TC 8600 | L TC 8800 Series en | 73 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. User F unction 1 - Local K eyboard T est User Function 1 can be used as a local test t o ensure that all the keyboard LEDs and switches ar e working. This function aut omatically calibrate s the cent er position of the analog joys ti[...]

  • Page 80

    74 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 User F unction 2 - Show K eyboard P or t Number User Function 2 ma y be used to identify which port a k eyboard is plugged int o. Af t er entering User F unction 2, read the ke yboa rd por t number from the monitor display on the ke [...]

  • Page 81

    L TC 8600 | L TC 8800 Series en | 75 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. User Function 8 - Set Dat e User Function 8 enables the user to set the date displa yed on all syst em monitors. If using the L TC 8555 Series keyboard, use the jo ystick to select the day , month, or yea r in an e di t l i ne ( di s[...]

  • Page 82

    76 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 User F unction 13 - P rint Sy st em Configurat ion T ables Use this funct ion to print the contents of the various syst em configur ation tables. Move the joy stick up and down to select a table, then pr ess [Enter] to send it to the[...]

  • Page 83

    L TC 8600 | L TC 8800 Series en | 77 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. User Function 20 - Select Printer V erbosity Use this function t o select be tween print modes; L imited Printing and F ull Printing. This selection determines the amount of inf ormation pr int ed during alarm proce ss- ing. Both mod[...]

  • Page 84

    78 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 User F unction 26 - Set Disp lay Op tion On All Monit ors This function is similar to User F unction 6, ex cept it selects the monitor display option of all monit ors in the syst em. The User Function 26 mode allo ws r emoval of the [...]

  • Page 85

    L TC 8600 | L TC 8800 Series en | 79 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. User F unction 31 - Set Print er RS-232 Parame ter s This function is used to set the RS-232 baud r ate and handshak e options for the sy s- tem's print er por t . Upon entr y to the mode, the current set tings are display ed. M[...]

  • Page 86

    80 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 User F unctio n 38 - P rint er P or t Mode This function allows configuration of the syst em' s PRINTER por t for use with a L TC 8712 Series Console Port Expander accessor y device. Move the joy stick up or down to select the p[...]

  • Page 87

    L TC 8600 | L TC 8800 Series en | 81 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. diately be o verridden by operators at the sat ellite location having an y priority level. This situation is more lik ely to be encount ered in 3-tier satellite syst ems that do not hav e a good distribution of trunk lines (i.e., mor[...]

  • Page 88

    82 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 Some minor disturbance of the video images may be visible f or 1 or 2 seconds while the cameras are being adjust ed. If no changes are noticed, check t o make sure that you hav e compatible devices in y our syst em. If using an L TC [...]

  • Page 89

    L TC 8600 | L TC 8800 Series en | 83 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 19 Maintenance Inf or mation The Allegiant syst em has been designed t o per form for long periods of time with lit- tle or no mainte nance. Occasionally the need will arise to clean the k eyboard, or replace a fuse. Follow the instr[...]

  • Page 90

    84 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 19.3 AC Line F use Replacement The AC line fuse on Allegiant powe r supply models is found on the rear of the equip- ment bay near the line cord connector . Powe r supply models for 220-240 VA C input version ma y contain a circuit b[...]

  • Page 91

    L TC 8600 | L TC 8800 Series en | 85 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. which is frequently ch anging, including time/date and syst em crosspoint data (i.e., which camera is currently being display ed on which monitor). Mor e vital system data such as camera titles, alarm se t tings, user information and[...]

  • Page 92

    86 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 20 Character R OM T ables f or L T C 8600 and L T C 8800 The charact ers used in generating the vide o monit or display s are show n in the table on the follo wing pages. Note that in some cases, a single charact er may be com- prise[...]

  • Page 93

    L TC 8600 | L TC 8800 Series en | 87 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc.[...]

  • Page 94

    88 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03[...]

  • Page 95

    L TC 8600 | L TC 8800 Series en | 89 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc.[...]

  • Page 96

    90 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03[...]

  • Page 97

    L TC 8600 | L TC 8800 Series en | 91 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc.[...]

  • Page 98

    92 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03[...]

  • Page 99

    L TC 8600 | L TC 8800 Series en | 93 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc.[...]

  • Page 100

    94 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03[...]

  • Page 101

    L TC 8600 | L TC 8800 Series en | 95 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc.[...]

  • Page 102

    96 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03[...]

  • Page 103

    L TC 8600 | L TC 8800 Series en | 97 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc.[...]

  • Page 104

    98 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03[...]

  • Page 105

    L TC 8600 | L TC 8800 Series en | 99 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 21 ERROR MESSAGES • Error 01 - In valid camera reque st The camera number entered fr om the keyboard does no t exist . If using the optional L TC 8850 GUI Software or the optional L T C 8059 MCS, make sure the number exists in the [...]

  • Page 106

    100 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 • Error 25 - Alarm switcher running Alarm video may only be ac knowledged if the alarm switch er is not running; press [ HOLD] to st op the s witcher . • Error 50 - SEQUENCE not available The user tried to load a switcher sequen[...]

  • Page 107

    L TC 8600 | L TC 8800 Series en | 101 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. • Error 80 - T runk not available An at tempt wa s made to access a r emot e camera connected to a satellit e sys- te m, but no unused trunk lines are currentl y available. Depending on sy stem configuration and cer tain user opti[...]

  • Page 108

    102 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 22 T roubleshooting Guide The Allegiant syst em has been designed t o per form re liably fo r long periods of time. All circuitr y consists of state-of-the-art components designed around a modular concept . The modular concept allow[...]

  • Page 109

    L TC 8600 | L TC 8800 Series en | 103 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 22.2 K eyboard Check out 1. No ke yboard display indicat ors: Check interconnect cable for cut or br oken wires between k eyboard and mai n CPU bay . Replace cable if necessary. Relo- cate k eyboard connector on main CPU bay t o an [...]

  • Page 110

    104 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 22.4 Remot e Receiver/Dri ver F unctions I noperative 1. All receiver/driv ers and functions inop erative: Verify po wer LED indicat or on Signal Distribution Unit is lit . If not , check fuses on front of main CPU ba y power supply[...]

  • Page 111

    L TC 8600 | L TC 8800 Series en | 105 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. 23 GL OS SARY OF TERMS Auxiliar y An auxiliar y is an additional function of the r emot e receiver/driver whic h permits on/of f control of outputs available to the u ser . In the Alleg iant sys t em, ther e are f our rela y outputs[...]

  • Page 112

    106 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 Sequence A series of camera scenes tha t can be pr eprogrammed t o aut omatically switch. The Allegiant syst em can store up to 60 separ ate sequences, with eac h one capable of having a random camera order , individual camera dwell[...]

  • Page 113

    L TC 8600 | L TC 8800 Series en | 107 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. Appendix A Satellite Sy stem s A satellit e system configuration is usually used for a medium t o large distribut ed syst em, or to obtain extremely lar ge matr ix sizes configured more conventionall y . T ypically , a single Main c[...]

  • Page 114

    108 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 F igure 22 : Poss ible Allegian t Satel lite S yst em Configurations Any Allegiant Series switcher model (L TC 8100, L T C 8200, L TC 8300, L TC 8500, L TC 8600, L TC 8800, or L TC 8900) can be used as a main sit e or a satellit e s[...]

  • Page 115

    L TC 8600 | L TC 8800 Series en | 109 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. L TC 8569 Series Code Merger must be installed at the sat ellite sit e. The Code Merger combines code generat ed by th e main site and the sat ellite sit e, so both sites ha ve control over pan/tilt/zoom-equipp ed camera s locat ed [...]

  • Page 116

    110 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 ing a neutral camera would pre vent the situation where a r estrict ed camera could be switched t o a restrict ed operator's mo nit or whe n their trunk line is stolen. For this feature t o operate properly , the star t-up came[...]

  • Page 117

    L TC 8600 | L TC 8800 Series en | 111 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. Conceptual Diagram of Allegi ant Sate llite Swi tching Syst em F igure 2 3: Con ceptua l Diagram of Alle giant Sat ellite S witch ing Sy stem Ty p i c a l I n t u i K e y Keyb o ar d Video Biphase Data T ypical Fixe d Cameras Data C[...]

  • Page 118

    112 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 Conceptual Diagram of Dual Mast er A llegiant Satellit e System F igure 24: Conceptual Di agram of Dual Master Alle giant Sa tellite System Ty p i c a l F i x e d Cameras Ty p i c a l I n t u i K e y Keyb o ar d Video Video Video Vi[...]

  • Page 119

    L TC 8600 | L TC 8800 Series en | 113 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. Conceptual Diagram of Cascade d Allegiant Satellit e System F igure 25: Co nceptual Di agram of Cas caded Allegi ant Satelli te Syst em Ty p i c a l I n t u i K e y Keyb o ar d Ty p i c a l I n t u i Ke y Keyb o ar d Ty p i c a l I [...]

  • Page 120

    114 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 Appendix B Installation Checklists A simplified guide for those who are alread y familiar with installing and pr ogram- ming Allegiant syst ems. MAIN BA Y HARDWA RE INST ALLA TION Unpack equipment and verify that it ems have been re[...]

  • Page 121

    L TC 8600 | L TC 8800 Series en | 115 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. Appendix C Quick Refer e nce Cable Interconnections C.1 Main Bay Video COA X-All video input and output connections to the Allegiant syst em should be made using a good grade of RG59U, RG6, or RG11U coax ial cable using BNC con- nec[...]

  • Page 122

    116 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 C.4 Signal Distr ibuti on Uni t CONNECTI ON TO MAIN B A Y The Distribution unit is supplied with a 3 m long (10 ft) multiconductor cable with 9-pin D-type connectors. Po wer to the unit is pr ovided by the Allegiant's main bay [...]

  • Page 123

    L TC 8600 | L TC 8800 Series en | 117 F .01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Syst ems, Inc. Appendix D Main Bay Rear P anel Connect or Pin-outs Console P or t RS-232 Pin-outs Pin # Designa tion 1 CHASSIS GND 2R x 3T x 4C T S 5R T S 6 NO CONNECTION 7D A T A G N D 8 NO CONNECTION 9 NO CONNECTION Alarm Port RS -232 Pin-o uts [...]

  • Page 124

    118 | en L TC 8600 | L TC 8800 Series Bosch Security Systems, Inc. Instru ction Manual F .01U.127.393 | 2.0 | 2009.03 • The L TC 8506/00 cable (used to connect the Allegiant's console por t to an ext ernal P C) uses the following pi n-outs: • For r efer ence, a cable to connect the Allegiant's print er por t to an e xternal serial pri[...]

  • Page 125

    [...]

  • Page 126

    • 2009 Bosch Security Systems, Inc. F.01U.127.393 | Updated March 17, 2009 | Data subject to change without notice Americas Bosch Security Systems 130 Perinton Parkway Fairport, New York, 14450 USA Phone: +1 888-289-0096 +1 585-223-9180 security.sal es@us.bosch.com http://www.boschsecurity.us Europe, Middle East, Africa Bosch Security Systems B.V[...]