Go to page of
Similar user manuals
-
Security Camera
Bosch Appliances VDN-498
7 pages 0.51 mb -
Security Camera
Bosch Appliances EX36N
24 pages 0.37 mb -
Security Camera
Bosch Appliances WZ45N
35 pages 1.71 mb -
Security Camera
Bosch Appliances VIP X1
144 pages 2.55 mb -
Security Camera
Bosch Appliances VDN-0498
58 pages 0.79 mb -
Security Camera
Bosch Appliances VBN-5085
52 pages 1.36 mb -
Security Camera
Bosch Appliances NDN-733
48 pages 1.81 mb -
Security Camera
Bosch Appliances VDC-260
12 pages 0.11 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Bosch Appliances VG5 800 SERIES, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Bosch Appliances VG5 800 SERIES one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Bosch Appliances VG5 800 SERIES. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Bosch Appliances VG5 800 SERIES should contain:
- informations concerning technical data of Bosch Appliances VG5 800 SERIES
- name of the manufacturer and a year of construction of the Bosch Appliances VG5 800 SERIES item
- rules of operation, control and maintenance of the Bosch Appliances VG5 800 SERIES item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Bosch Appliances VG5 800 SERIES alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Bosch Appliances VG5 800 SERIES, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Bosch Appliances service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Bosch Appliances VG5 800 SERIES.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Bosch Appliances VG5 800 SERIES item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
AutoDome 800 Series HD PTZ Camera VG5 800 Series en Installation Manual[...]
-
Page 2
[...]
-
Page 3
AutoDome 800 Series HD PTZ Camera Table of Cont ents | en 3 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 T able of Contents 1S a f e t y 7 1.1 Important Safety Instructions 7 1.2 Safety Precautions 9 1.3 Important Notices 9 1.4 Customer Support and Service 13 2 Installing the Pendant Arm Wall, Corner, and Mast (P[...]
-
Page 4
4 en | Table of Cont ents AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 5 Alarms and Relay Connections 54 5.1 Alarm Inputs 54 5.2 Connecting Alarms (inputs 1 or 2) 54 5.2.1 Connecting a Normally Open Alarm 54 5.2.2 Connecting a Normally Closed Alarm 54 5.3 Configuring an Open Colle[...]
-
Page 5
AutoDome 800 Series HD PTZ Camera Table of Cont ents | en 5 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 7.23 Lens Settings 86 7.24 PTZ Settings 87 7.25 Diagnostics 88 7.26 Preposition and Tours 89 7.27 Sectors 89 7.28 Miscellaneous 90 7.29 Logs 90 7.30 Audio 90 7.31 Pixel Counter 90 7.32 Advanced Mode: Recording[...]
-
Page 6
6 en | Table of Cont ents AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. A Keyboard Commands by Number 116 Index 117[...]
-
Page 7
AutoDome 800 Series HD PTZ Camera Saf ety | en 7 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1S a f e t y 1.1 Impor tant Safety Instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the[...]
-
Page 8
8 en | Safety AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 11. Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconne ct the power from the cable to be installed into the unit. – For battery powered unit[...]
-
Page 9
AutoDome 800 Series HD PTZ Camera Saf ety | en 9 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1.2 Safety Precautions 1.3 Impor tant Notice s Accessories - Do not place this unit on an unstable s tand, tripod, bracket, or mount. The unit may fall, causing serious injury and/or serious damage to the unit. Use only [...]
-
Page 10
10 en | Safety AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. – Disconnect the unit's input connectors fr om outdoor equipment before disconnecting the grounding plug or grounding terminal. – Follow proper safety precautions such as gr ounding for any outdoor device connect[...]
-
Page 11
AutoDome 800 Series HD PTZ Camera Saf ety | en 11 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Power lines - Do not locate the camera near overhe ad power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights. SELV All the input/output ports are Safety Extra L[...]
-
Page 12
12 en | Safety AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. destinées à fournir une protection raisonn abl e contre les interférences nuisibles quan d l'appareil est utilisé dans une installation comm e rciale. Cette appareil génère, utilise et émet de l'energie d[...]
-
Page 13
AutoDome 800 Series HD PTZ Camera Saf ety | en 13 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1.4 Customer Support and Ser vice If this unit needs service, contact the near est Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers USA Telephone: 800-366-2283[...]
-
Page 14
14 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 2 Installing the P endant Arm Wall, Corner , and Mast (P ole) Mounts 2.1 Unpacking This equipment should be unpacked and handled wi th care. If an item appears to[...]
-
Page 15
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 15 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 2.1.2 Description This chapter details how to install an AutoDome Pendant Arm to a wall, a corner, or to a mast (pole). Any variations to the in stallation proced[...]
-
Page 16
16 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 2.3 Mount P ow er Supply Bo x Before mounting the Power Supply Box decide if yo u s h o u l d w i r e t h e b o x through the holes in the bottom or back of the b[...]
-
Page 17
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 17 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 6. Attach 3/4-inch (20-mm) NPS watertight pipe fittings (not supplied) to the bottom or back holes of the Power Supply Box through which you will run the power, v[...]
-
Page 18
18 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 4. Attach the supplied 3-pin Power Plug to th e incoming power wires. See connector P101 in Table 2.1, Page 20 , for wire connections. 5. Attach an RJ45 plug to t[...]
-
Page 19
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 19 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 2.4.1 Power Supply Box Connections The following figure is a detai led illustration of the Pendan t Arm Power Supply Box, which includes the fuse specifications. [...]
-
Page 20
20 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Ta b l e 2 . 1 P ower Supply Bo x Connections 2. 5 Ro u te Powe r t hro u gh In te rm ed ia te Powe r S up p ly B ox You may route the main power supply through a[...]
-
Page 21
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 21 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 To properly wire the incoming high voltage and the outgoing low voltage lines, refer to this table: Ta b l e 2 . 2 VG4-PSU1/VG4-PSU2 P ower Supply Bo x Connection[...]
-
Page 22
22 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 6. Route the 24 VAC outgoing power supply wires into the VG4-PA0 power supp ly box through the conduit fitting on the left side of the box. 7. Cut and trim the 24[...]
-
Page 23
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 23 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1. Compress the bottom hinge pin by pushin g the pin lever downward and rotating it behind the Hinge Pin Stop. Figure 2. 9 Pendant Arm to P ower Bo x Hinge Alignm[...]
-
Page 24
24 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Figure 2.10 Pendant Arm connections to P ower Supply Box 1. Attach the earth ground wire (item 1 in the i llustration above) to the grounding screw on the left si[...]
-
Page 25
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 25 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 6. Connect the 3-pin Power In Pl ug, installed previously, to its matting connector P101 on the left side of the box. 7. If installing a Fiber Optic model attach [...]
-
Page 26
26 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 2.8 Installing the V G4-A-ARMPL A TE This section provides instructions to install a wall, corner, or mast mount with the VG4-A- ARMPLATE Mounting Plate instead o[...]
-
Page 27
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 27 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3. Ensure that the mounting plate is secure. 2.8.1 Attach the Pendant Arm to the Mounting Plate The bottom hinge pin of the Pendant Arm is provid ed with a Hinge [...]
-
Page 28
28 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Figure 2.13 Pend an t Ar m Cab le s 1. R oute all incoming wires through on e of the conduits at the bo ttom of the Mounting Plate. For a mast mount, route all wi[...]
-
Page 29
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 29 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Figure 2.14 Mounting Plate - Inside De tail 4. Conn ect the incoming 24 VAC power wires to the 5-pin, 24 VAC Power In mating connector (supplied with the Mounting[...]
-
Page 30
30 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 12. Connect the Earth ground wire, if availabl e, to the crimp ring terminal inside the Mounting Plate. Refer to Figure 2.14 above. Note : The Earth ground is not[...]
-
Page 31
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 31 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 2.9 Attach Pendant to Arm and Tight en 1. Tilt the bottom of the dome toward the pendant arm base and place the mounting hook, located on top of the dome housing,[...]
-
Page 32
32 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 4. Hold the Pendant housing in position whil e tightening the two (2) 5-mm Allen head mounting screws on top of the housing to 10-12 N-m (90-105 in.-lbs) . CAUTIO[...]
-
Page 33
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 33 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3 Installing Roof Parape t and Pipe Mounts 3.1 Unpacking This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper i[...]
-
Page 34
34 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 3.2 Pre-installation Check Li st 1. Determine the location and distance for th e powe r supply box based on its voltage and current consumption. See Section 4 Cable and Wire Standards, pag[...]
-
Page 35
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 35 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Figure 3. 1 Wall Mount Pow er Supply with Optional T r im Skir t 1. Use the wall mount template supplied in the packaging box to locate the four (4) mounting holes for th e Power Supply B[...]
-
Page 36
36 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 3.3.1 Attach Cover Door 1. Compress the bottom hinge pin by pushing the pin lever down and then rotate it behind the Hinge Pin Stop. The power box Cover Door provides a Hinge Pin Stop to h[...]
-
Page 37
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 37 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3.4 Route Wire s and At tach Connectors Power wires must be routed to the left (fro nt) side of the Power Supply Box through a separate conduit. All video, control, and alarm wires must b[...]
-
Page 38
38 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Figure 3. 4 VG4-A-PSU1 or VG4-A -PSU2 Power Supply Box Connect ed to Pipe Interface Board VG4-A-PSU1/VG4-A-PSU2 P ipe Interface Board 1 120 VAC/230 VAC Power In 7 P101 Connector 2 P101 Con[...]
-
Page 39
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 39 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3.4.1 Wiring the Power Supply Box 1. Route the high voltage 115/230 VAC lines throug h the conduit fitting on th e left side of the box. 2. Cut and trim the high voltage 115/230 VAC power[...]
-
Page 40
40 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 1T r a n s f o r m e r 5I n / O u t 2 Ethernet to Dome 6 ST Connector (Fiber) 3I n / O u t 7P o w e r I n 4 From Arm Harness 8 Data In/Out (GND) GND TXD RXD C+ C- ( FUSE) ( FUSE) ( [...]
-
Page 41
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 41 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3.4.3 Power Supply Box Connections The following figure is a detaile d illustration of the Roof or Pipe Mount Power Supply Box, which includes the fuse specifications. The following table[...]
-
Page 42
42 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Ta b l e 3 . 1 P ower Supply Bo x Connections 3.5 Installing the V G4-A-9230 Roof Par ape t Mount This section details the installation steps for the Roof Parapet Mount. If you are install[...]
-
Page 43
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 43 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Figure 3. 6 Parape t Wall Mount Bracket and Roof Mo unt Plate 3. Apply a weatherproof sealant around each fastener hole at the mounting surface. 4. Attach the Parapet Wall Bracket using a[...]
-
Page 44
44 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Figure 3. 7 VG4-A-9230 Parape t Mount 7. Fold the Ethernet and power wires back at th e front end of the arm and route them down and out through the Down Pipe. Then replace the End Cap. 8.[...]
-
Page 45
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 45 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 12. Proceed to Section 3.7 Wire the Pipe Interf ace Board, pa ge 46 . 3.6 Installing the VG4-A-9543 Pipe Mount This section details the installation steps for th e VG4-A-9543 Pipe Mount. [...]
-
Page 46
46 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 7. Thread the Pipe Cap onto the down pipe and tighten securely to prevent leaks. See Figure 3.9, Page 45 . 3.7 Wir e the Pipe Interface Board This section provides instructions for connect[...]
-
Page 47
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 47 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3.7.1 Connecting Wires to the Pipe In terface Board The Pipe Interface Board contains all of the connectors for control, data, image, and power wires. Follow the procedures below to make [...]
-
Page 48
48 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Figure 3.11 Alarm and Relay Connect or Plugs Note: There is a slot located at the top of the In terface Board to tie the wires to the circuit board with a cable tie. 5. Insert the Pipe Int[...]
-
Page 49
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 49 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3.8 Attach Pendant to Pipe and Tighten 1. Before attaching the Pendant, visually insp ect the Pendant dome an d the Interface Board connectors for any blo cked pin holes and bent pins. 2.[...]
-
Page 50
50 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 3. Drop the Pe ndant down slightly to engage the dome hook and hinge pin of the Dome Cap, allowing the dome to rotate around the hinge pin. 4. Rotate the dome housing down to a vertical po[...]
-
Page 51
AutoDome 800 Series HD PTZ Camera Cable and Wire Standards | en 51 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 4 Cable and Wire S tandards 4.1 Po wer 4.2 Wire Distance Guide for P endant Ta b l e 4 . 1 Ma x i mu m W i re D i s t an c e s fr o m Pow e r S u p p ly to A u to D o m e 4.3 Video and Control Cables Et[...]
-
Page 52
52 en | Cable and Wire Standar ds AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 4.4 Audio Cables The AutoDome 800 Series is capable of rece iving line input audio signals and transmitting it over a network. The audio signal is transmitted one-way and in sync with the video signals.[...]
-
Page 53
AutoDome 800 Series HD PTZ Camera Cable and Wire Standards | en 53 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1 Audio- (C-) 7 AutoDome Data In/Out 2 Audio+ (C+) 8 P105/P106 Connector 3E a r t h G r o u n d 9 A u d i o O u t 4R x D 5 TxD 6S i g n a l G r o u n d NOTICE! See Section 7.30 Audio, page 90 for audio [...]
-
Page 54
54 en | Alarms and Relay Connections AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 5 Alarms and Rela y Connections 5.1 Alarm Inputs The AutoDome provides two alar m inputs. Each input can be ac tivated by dry contact devices such as pressure pads, passive infrared detect ors, door [...]
-
Page 55
AutoDome 800 Series HD PTZ Camera Alarms and Relay Connections | en 55 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Figure 5. 2 N.C. Norma lly Closed Non-supervised Connections 2. From the Alarm Connections page on the Settings Page ( Section 7.39 Alarm Connections, page 95 ) the Alarm Input # to N.C. See the tab[...]
-
Page 56
56 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 6 Using the AutoDome 800 Serie s The AutoDome 800 Series transmits PTZ control commands and images over a TCP/IP network. It also allows users to configure the camera display se ttings, camera oper[...]
-
Page 57
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 57 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 If you choose to use a computer running Micros oft Internet Explorer or any of the Bosch software, the computer must conform to the following minimum requirements: – Operating System: Windows XP [...]
-
Page 58
58 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Figure 6. 1 AutoDome 800 Series Syst em Configuration 6.4 Configuring the AutoDome 800 Series Camera To operate the camera in your network you must assign it a valid network IP address. The default[...]
-
Page 59
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 59 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 6.4.1 Changing the Network Settings The AutoDome 800 Series has a default IP address of 192.168.0.1. To change the I P address or any network settings, you can use the Conf iguration Manager softwa[...]
-
Page 60
60 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 8. Click the Set button to save the settings. 9. Launch another instance of Microsoft Internet Explorer. 10. Type the original I P address followed by /r eset (for example, http://192.168.0.1/reset[...]
-
Page 61
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 61 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 6.5.2 Guidelines for Implem enting Intelligent Tracking Factors such as the viewing angle and unwant ed motion (from trees, for example) may interfere with Intelligent Trac king operation. Use the [...]
-
Page 62
62 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Maximum Number of Connections If you do not connect, the unit may have reached its maximum number of connections. Depending on the unit and network configuration , each AutoDome 800 Se ries can hav[...]
-
Page 63
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 63 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1. To control a peripheral, cl ick the appropriate controls. 2. Move the mouse cursor over the video image. Additional options for co ntrolling peripherals are displayed with the mouse cursor. 3. T[...]
-
Page 64
64 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 1. If you want to delete the entries, click the de lete icon in the top ri ght-hand corner of the relevant field. 2. If you want to view a detaile d log, click th e icon in the top right-hand corn [...]
-
Page 65
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 65 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 To View a Preset Shot: 1. Click the number of the scene you want to view using the on-screen keypad. 2. Click the Show Shot button. 6.6.2 Using Intelligent Tracking Intelligent Tracking continuousl[...]
-
Page 66
66 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Scan 360 Click this button to start a continuous 360° pan. To stop the continuos pan, click a directional control in the View Control tab. Autopan Click this button to pan the AutoDome between use[...]
-
Page 67
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 67 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 You can obtain additional inform ation to help when you troublesh oot or fine-tune the unit. The values indicate the proportions of the indivi dual functions on the encoder load, shown as percentag[...]
-
Page 68
68 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 6.10 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page (the Recordings link is only visible if a st orage medium has been selecte d). Selecting Recor[...]
-
Page 69
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 69 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Set bookmark Jump to the following bookmark Bookmarks are only valid while in the Reco rdings page; they are not saved with the sequences. All bookma rks are deleted when leaving the page .[...]
-
Page 70
70 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 7 Configuring the AutoDome 800 Series The SETTINGS page provides access to the configuratio n menu, which contains all th e unit's parameters arranged in groups. You can view the current [...]
-
Page 71
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 71 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Password An AutoDome 800 Series is generally protected by a password to prevent unauthorized access to the unit. You can use different au thorization levels to limit access. The AutoDome 800 [...]
-
Page 72
72 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Select Time server for a time server that work s with the protocol RFC 868. 7.3 Basic Mode: Network The settings on this page are used to integrate the AutoDome 800 Seri es into an existing ne[...]
-
Page 73
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 73 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 – HD low bandwidth Target bit rate: 2500 kbps Maximum bit rate: 5000 kbps Encoding interval: 30.00 ips – SD high quality / low latency Target bit rate: 2000 kbps Maximum bit rate: 4000 kb[...]
-
Page 74
74 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Storage medium 1. Select th e required storage medium from the list. 2. Click the Start button to start the recording immediately. 7.7 Basic Mode: Sy stem Overview The data on this page are fo[...]
-
Page 75
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 75 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Password The AutoDome 800 Series operates wi th three authorization levels: service , user and live . The highest authorization level is service . After entering the correct password, you can[...]
-
Page 76
76 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 1. Firs t check whether the correct time zone is sele cted. If it is not correct, select the appropriate time zone for the system, and click the Set button. 2. Click the Details button. A new [...]
-
Page 77
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 77 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Display milliseconds If necessary, you can also display milliseconds . This information can be useful for recorded video images; however, it does increase the processor's computin g time[...]
-
Page 78
78 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Website language Select the language for the user interface here. Company logo Enter the path to a suitable graphic if y ou want to replace the manufact urer's logo. The image file can be[...]
-
Page 79
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 79 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Show event log The event messages are displayed along with the date and time in a field next to the video image. Show system log The system messages are displayed along with the date and time[...]
-
Page 80
80 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. SC Settings Click the Default button to restore all camera settings to their original defaults. SC Data Click the default button to clear all preposit ion, privacy mask, and other user setting[...]
-
Page 81
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 81 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 – DSL Target bit rate: 400 kbps Maximum bit rate: 500 kbps Encoding interval: 30.00 ips – ISDN (2B) Target bit rate: 80 kbps Maximum bit rate: 100 kbps Encoding interval: 30.00 ips You ca[...]
-
Page 82
82 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Encoding Interval The figure selected here determines the in terval at which images are encoded and transmitted. The image rate in ips (images per second) is displayed next to the text field. [...]
-
Page 83
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 83 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 SD stream options (use these options if a second H.264 stream is allowed): – H.264 BP+ bit-rate-limit ed Select this setting when using hardware de coders. The bit rate is limited to 1.2 Mb[...]
-
Page 84
84 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. – Picture quality : his setting allows you to adjust th e image quality. Use the slide bar to choose a quality between Low and High. 7.21 Privacy Masks Privacy Masking is used to block out a[...]
-
Page 85
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 85 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 – Sodium Lamp Auto: Automatically adjusts for sodium vapor light to restore objects to their original color. – Sodium Lamp: Optimizes the sodium vapor light to re store objects to their o[...]
-
Page 86
86 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. High Sensitivity Setting Night Mode Selects night mode (B/W) to enhance lighting in low light scenes. Select from the following options: – Off : Forces the camera to stay in Nigh Mode and tr[...]
-
Page 87
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 87 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Iris Polarity Capability to reverse the operation of the iris button on the controller. – Normal (default) : iris controls operate normally. – Reverse : iris controls are reversed. Auto I[...]
-
Page 88
88 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Autopan Right Limit Sets the right Auto Pan limit of the camera. U se the preview window to move the camera to the right pan limit and click the button. The camera will not move past this limi[...]
-
Page 89
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 89 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 7.26 Preposition and T ours The AutoDome 800 Series can store up to 99 pre set sce nes and this section allows you to define the individual scenes that comprise a preposition tour . You defin[...]
-
Page 90
90 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. To define a title for sectors: 1. Place the cursor in the input box to the right of the sector number. 2. Type a title for the sector, up to 20 characters long. 3. To blank the sector, click t[...]
-
Page 91
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 91 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 7.32 A dvanced Mode: R ecording 7.33 St orage Management You can record the images from the AutoDome 800 Series on various local storage media or on an appro priately c onfigured iSCSI syste [...]
-
Page 92
92 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. storage media list. In the Status column, newly added media are indicated by the status Not active . 3. Click the Set button to activate all media in the Managed storage media list. In the Sta[...]
-
Page 93
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 93 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Standard recording Here you can select the mode for standard recordings. If you select Continuous , the recording proceeds contin uously. If the maximum memory capacity is reached, older reco[...]
-
Page 94
94 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 7.35 Retention Time You can specify the retention times for recordin gs. If the available memory capacity of a medium has been used, older recordings are only overwritten if the retention time[...]
-
Page 95
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 95 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Time periods You can change the names of the recording profiles. 1. Click a profile and then the Rename button. 2. Enter your chosen name and then click the Rename button again. Activating th[...]
-
Page 96
96 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. are to be possible, for example when initiating connections via higher-ranking systems such as VIDOS or Bosch Video Management System, you can store a gene ral password here. The AutoDome 800 [...]
-
Page 97
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 97 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 You can activate and configure encryption of the media data (video and metadata) on the Encryption page (see Section 7.54 Encryption, page 111 ). Auto-connect Select the On option to automati[...]
-
Page 98
98 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 1. To rename the file, click the icon to the ri ght of the list field and enter the new profile name in the field. 2. Click the icon again. The new profile name is saved. Alarm status The alar[...]
-
Page 99
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 99 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Debounce time 1 s (MOTION+ only) The debounce time is intended to prevent very brief alarm events from triggering individual alarms. If the Debounce time 1 s option is activated, an alar m ev[...]
-
Page 100
100 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. necessary for changes to occur simultaneously in a large number of sensor fields to trigger an alarm. This option allows you to dete ct, independently of motion alarms, manipulation of the or[...]
-
Page 101
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 101 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1. Click Select Area to configure th e sensor fields. A new window will open. 2. If nece ssary, click Clear All first to clear the current sel ection (fields marked yellow). 3. Left-click th[...]
-
Page 102
102 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 7.42 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. In this way it is possible to notify a recipient who does not have a video receiver[...]
-
Page 103
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 103 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 7.43 Alarm T ask Editor As an alternative to the alarm settings on the va rious alarm pages, you can enter your desired alarm functions in script form here. This will overwrite all settings [...]
-
Page 104
104 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 3. Choose one of the following output command s for both Output 1 and Output 2 settings: – None: no defined command. – Alarm Relay: defines a physical connecti on from the open collector [...]
-
Page 105
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 105 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 –R e m o t e I n p u t 1 Relay Name You can assign a name for the relay here. The name is shown on the button next to Trig ger relay . The Livepage can also be co nfigured to display the n[...]
-
Page 106
106 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 7.49.2 IPv6 Consult with the network administrator befo re making changes to the this section. IP Address Enter the desired IP address for the AutoDome 8 00 Series in this field. T he IP addr[...]
-
Page 107
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 107 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 You can activate and configure encryption of the media data (video and metadata) on the Encryption page (see Section 7.54 Encryption, page 111 ). RCP+ port 1756 To exchange connection data, [...]
-
Page 108
108 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Status The status of the DynDNS function is displayed here for in formation purposes. You cannot change any of these settings. 7.50 Advanced The settings on this page are used to im plement a[...]
-
Page 109
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 109 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 NTCIP Specifies a set of rules and protocols for organi zing, describing and ex changing transportation management information between transp ortation management applications and transportat[...]
-
Page 110
110 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. The multicast address can be the same for multiple streams. Howe ver, it will be necessary to use a different port in each case so that multiple data streams are not sent simultaneously using[...]
-
Page 111
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 111 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Posting interval Enter the interval in seconds at which the images will be sent to an FT P server. Enter ze ro if you do not want any images to be sent. FTP server IP address Enter the IP ad[...]
-
Page 112
112 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. CAUTION! Before launching the firmware upload make su re that you have select ed the correct upload file. Uploading the wrong files can result in th e unit no longer being addressable, in whi[...]
-
Page 113
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 113 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Configuration You can save configuration data for the AutoDome 800 Series on a computer and then load saved configuration data from a computer to the unit. Upload 1. Enter the full path of t[...]
-
Page 114
AutoDome 800 Series HD PTZ Camera Bubble Handling and Cleaning | en 113 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 8 Bubble Handling and Cleaning The bubble is made of acrylic for excellent op tical clarity. Special ca re is required when handling and cleaning the bubble to avoid scratching it. 8.1 Handling The[...]
-
Page 115
114 en | Bubble Handling and Cleaning AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 8.2.2 Cleaning the Bubble Exterior The exterior of the bub ble is hard coated for extra protection. If cleaning becomes necessary, only use cleaning solutions and cloths suitable f or cleaning safet[...]
-
Page 116
AutoDome 800 Series HD PTZ Camera BVIP Fir mwar e Updates | en 115 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 9 BVIP Firm ware Updat es The AutoDome 800 Series incorporate a network video server in the IP module. The primary function of the server is to encode video and control data fo r transmission over a TCP[...]
-
Page 117
116 en | AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. A K e yboard Commands b y Number Locked A larm Rule Output Function Key Comm No. Command Description Y On/Off 1 Scan 360° Autopan without limits On/Off 2 Autopan Autopan between limits Y On/Off 8 Play Pre-position Tour Activat[...]
-
Page 118
AutoDome 800 Series HD PTZ Camera Index | en 117 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Inde x Symbols /reset 60 A activating the recording 95 activation key 112 alarm 77 alarm e-mail 102 alarm inputs 54 non-supervised 54 normally closed non-supervised 54 normally open non-supervised 54 with parapet roof or[...]
-
Page 119
118 en | Index AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. files JPEG 56 MPEG-4 56 firewall 96 , 106 firmware upload 111 formatting 92 FTP server 110 , 111 fuse specifications 19 G gateway 72 , 105 , 106 gateway address 58 general password 96 guard tour 88 guy-wire 45 H holidays [...]
-
Page 120
AutoDome 800 Series HD PTZ Camera Index | en 119 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 P parapet arm stabilizing 45 password 62 , 71 , 74 , 75 pendant connector harness 25 , 30 pendant arm attaching to power supply box 22 pendant arm, corner or mast mount mast plate 16 pendant assembly attaching to pipe mo[...]
-
Page 121
120 en | Index AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. U UDP 56 , 96 , 106 unicast 109 unit date 75 unit identification 70 unit name 70 unit time 71 , 75 unshielded twisted pair with pendant arm, corner or mast mount 18 UPnP 109 user name 71 , 75 UTP CAT-5 51 V VG4-A-9230 33 [...]
-
Page 122
[...]
-
Page 123
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2012[...]